From: "Liu, Yong" <yong.liu@intel.com>
To: "Tu, LijuanX A" <lijuanx.a.tu@intel.com>,
"Xu, Qian Q" <qian.q.xu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Tu, LijuanX A" <lijuanx.a.tu@intel.com>
Subject: Re: [dts] [PATCH]sriov-mirror: merge it from DTF to dts
Date: Mon, 23 May 2016 20:46:26 +0000 [thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E2221B879@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1462503569-15581-1-git-send-email-lijuanx.a.tu@intel.com>
Lijuan, few comments.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Lijuan Tu
> Sent: Thursday, May 05, 2016 7:59 PM
> To: Xu, Qian Q; dts@dpdk.org
> Cc: Tu, LijuanX A
> Subject: [dts] [PATCH]sriov-mirror: merge it from DTF to dts
>
> Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
> ---
> tests/TestSuite_sriov_kvm.py | 183 +++++++++++++++++++++++++++++++++-----
> -----
> 1 file changed, 142 insertions(+), 41 deletions(-)
>
> diff --git a/tests/TestSuite_sriov_kvm.py b/tests/TestSuite_sriov_kvm.py
> index cd3d9c3..cc63804 100644
> --- a/tests/TestSuite_sriov_kvm.py
> +++ b/tests/TestSuite_sriov_kvm.py
> @@ -9,15 +9,14 @@ Test userland 10Gb PMD.
> """
>
> import re
> -import pdb
> import time
> +from functools import wraps
>
> import dts
> from qemu_kvm import QEMUKvm
> from test_case import TestCase
>
> from pmd_output import PmdOutput
> -
> FRAME_SIZE_64 = 64
> VM_CORES_MASK = 'all'
>
> @@ -106,10 +105,14 @@ class TestSriovKvm(TestCase):
> tester_port = dut.ports_map[dut_dest_port]
> if not ether_ip.get('ether'):
> ether['dest_mac'] = dut.get_mac_address(dut_dest_port)
> + if not re.match(r'([0-9A-F]{2}:){5}[0-9A-F]{2}',
> ether['dest_mac']):
> + ether['dest_mac'] = dut.testpmd.get_port_mac(dest_port)
> ether['src_mac'] = dut.tester.get_mac(tester_port)
> else:
> if not ether_ip['ether'].get('dest_mac'):
> ether['dest_mac'] = dut.get_mac_address(dut_dest_port)
> + if not re.match(r'([0-9A-F]{2}:){5}[0-9A-F]{2}',
> ether['dest_mac']):
> + ether['dest_mac'] =
> dut.testpmd.get_port_mac(dest_port)
> else:
> ether['dest_mac'] = ether_ip['ether']['dest_mac']
> if not ether_ip['ether'].get('src_mac'):
> @@ -210,7 +213,7 @@ class TestSriovKvm(TestCase):
> for _ in self.get_stats(dut,
> dest_port, "rx")]
> if not src_port:
> itf = self.tester.get_interface(
> - dut.ports_map[dut_ports[dest_port]])
> + self.dut.ports_map[dut_ports[dest_port]])
> else:
> itf = src_port
>
> @@ -291,8 +294,8 @@ class TestSriovKvm(TestCase):
> self.port1.unbind_driver()
> self.port1_pci = self.dut.ports_info[p1]['pci']
>
> - vf0_prop = {'prop_host': self.port0_pci}
> - vf1_prop = {'prop_host': self.port1_pci}
> + vf0_prop = {'opt_host': self.port0_pci}
> + vf1_prop = {'opt_host': self.port1_pci}
>
> # set up VM0 ENV
> self.vm0 = QEMUKvm(self.dut, 'vm0', 'sriov_kvm')
> @@ -307,10 +310,14 @@ class TestSriovKvm(TestCase):
> self.setup_2vm_2vf_env_flag = 1
>
> def destroy_2vm_2pf_env(self):
> + self.vm_dut_0.close()
> + self.vm_dut_0.logger.logger_exit()
> self.vm0.stop()
> self.port0.bind_driver('igb_uio')
> self.vm0 = None
>
> + self.vm_dut_1.close()
> + self.vm_dut_1.logger.logger_exit()
> self.vm1.stop()
> self.port1.bind_driver('igb_uio')
> self.vm1 = None
> @@ -332,8 +339,8 @@ class TestSriovKvm(TestCase):
>
> time.sleep(1)
>
> - vf0_prop = {'prop_host': self.sriov_vfs_port[0].pci}
> - vf1_prop = {'prop_host': self.sriov_vfs_port[1].pci}
> + vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
> + vf1_prop = {'opt_host': self.sriov_vfs_port[1].pci}
>
> for port_id in self.dut_ports:
> if port_id == self.used_dut_port:
> @@ -369,10 +376,16 @@ class TestSriovKvm(TestCase):
> raise Exception(e)
>
> def destroy_2vm_2vf_env(self):
> + if getattr(self, 'vm_dut_0', None):
> + self.vm_dut_0.close()
> + self.vm_dut_0.logger.logger_exit()
> if getattr(self, 'vm0', None):
> self.vm0.stop()
> self.vm0 = None
>
> + if getattr(self, 'vm_dut_1', None):
> + self.vm_dut_1.close()
> + self.vm_dut_1.logger.logger_exit()
> if getattr(self, 'vm1', None):
> self.vm1.stop()
> self.vm1 = None
> @@ -406,10 +419,10 @@ class TestSriovKvm(TestCase):
>
> time.sleep(1)
>
> - vf0_prop = {'prop_host': self.sriov_vfs_port[0].pci}
> - vf1_prop = {'prop_host': self.sriov_vfs_port[1].pci}
> - vf2_prop = {'prop_host': self.sriov_vfs_port[2].pci}
> - vf3_prop = {'prop_host': self.sriov_vfs_port[3].pci}
> + vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
> + vf1_prop = {'opt_host': self.sriov_vfs_port[1].pci}
> + vf2_prop = {'opt_host': self.sriov_vfs_port[2].pci}
> + vf3_prop = {'opt_host': self.sriov_vfs_port[3].pci}
>
> for port_id in self.dut_ports:
> if port_id == self.used_dut_port:
> @@ -458,18 +471,30 @@ class TestSriovKvm(TestCase):
> raise Exception(e)
>
> def destroy_4vm_4vf_env(self):
> + if getattr(self, 'vm_dut_0', None):
> + self.vm_dut_0.close()
> + self.vm_dut_0.logger.logger_exit()
> if getattr(self, 'vm0', None):
> self.vm0.stop()
> self.vm0 = None
>
> + if getattr(self, 'vm_dut_1', None):
> + self.vm_dut_1.close()
> + self.vm_dut_1.logger.logger_exit()
> if getattr(self, 'vm1', None):
> self.vm1.stop()
> self.vm1 = None
>
> + if getattr(self, 'vm_dut_2', None):
> + self.vm_dut_2.close()
> + self.vm_dut_2.logger.logger_exit()
> if getattr(self, 'vm2', None):
> self.vm2.stop()
> self.vm2 = None
>
> + if getattr(self, 'vm_dut_3', None):
> + self.vm_dut_3.close()
> + self.vm_dut_3.logger.logger_exit()
> if getattr(slef, 'vm3', None):
> self.vm3.stop()
> self.vm3 = None
> @@ -584,8 +609,9 @@ class TestSriovKvm(TestCase):
>
> mirror_rule_cmd = "reset port %d mirror-rule %d" % (port, rule_id)
> out = self.dut.send_expect("%s" % mirror_rule_cmd, "testpmd> ")
> - self.verify("Bad arguments" not in out,
> - "Reset port %d mirror rule failed!")
> + self.verify(
> + "Bad arguments" not in out,
> + "Reset port %d mirror rule failed!")
>
> self.remove_port_ruleid(port, rule_id)
>
> @@ -629,7 +655,22 @@ class TestSriovKvm(TestCase):
>
> self.setup_2vm_prerequisite_flag = 0
>
> - def stop_test_setup_two_vm_pf_env(self):
> + def skip_func(func):
Not sure why use wrap function here, we used to skip unsupported NIC by checklist excel file.
> + @wraps(func)
> + def skip_nic(*args, **kwargs):
> + self = args[0]
> + if func.__name__ == "test_setup_two_vm_pf_env":
> + self.dut.logger.info("This func is just for internal
> test!")
> + return func
> + if self.nic.startswith('fortville'):
> + self.dut.logger.info("NIC is [ %s ], skip this case
> [ %s ]" %
> + (self.nic, func.__name__))
> + return func
> + return func(*args, **kwargs)
> + return skip_nic
> +
> + @skip_func
> + def test_setup_two_vm_pf_env(self):
> self.setup_2vm_2pf_env()
>
> out = self.vm_dut_0.send_expect("ifconfig", '# ')
> @@ -644,6 +685,7 @@ class TestSriovKvm(TestCase):
>
> self.destroy_2vm_2pf_env()
>
> + @skip_func
> def test_two_vms_intervm_communication(self):
> self.setup_2vm_2vf_env()
>
> @@ -697,12 +739,18 @@ class TestSriovKvm(TestCase):
> packet_num = 10
>
> rule_id = self.set_port_pool_mirror(port_id_0, '0x1 dst-pool 1
> on')
> + host_start_stats = self.host_testpmd.get_pmd_stats(port_id_0)
> + vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> self.send_packet(
> self.vm_dut_0, self.vm0_dut_ports, port_id_0,
> count=packet_num)
> vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> + vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> + host_end_stats = self.host_testpmd.get_pmd_stats(port_id_0)
>
> vm1_ret_stats = self.calculate_stats(vm1_start_stats,
> vm1_end_stats)
> + vm0_ret_stats = self.calculate_stats(vm0_start_stats,
> vm0_end_stats)
> + host_ret_stats = self.calculate_stats(host_start_stats,
> host_end_stats)
>
> self.verify(vm1_ret_stats['RX-packets'] == packet_num and
> vm1_ret_stats['TX-packets'] == packet_num,
> @@ -744,12 +792,15 @@ class TestSriovKvm(TestCase):
>
> self.vm1_testpmd.execute_cmd('set fwd rxonly')
> self.vm1_testpmd.execute_cmd('start')
> + host_start_stats = self.host_testpmd.get_pmd_stats(port_id_0)
> vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> self.vm0_testpmd.execute_cmd('start tx_first')
> + host_end_stats = self.host_testpmd.get_pmd_stats(port_id_0)
> vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
>
> + host_ret_stats = self.calculate_stats(host_start_stats,
> host_end_stats)
> vm0_ret_stats = self.calculate_stats(vm0_start_stats,
> vm0_end_stats)
> vm1_ret_stats = self.calculate_stats(vm1_start_stats,
> vm1_end_stats)
>
> @@ -758,6 +809,10 @@ class TestSriovKvm(TestCase):
>
> self.reset_port_mirror_rule(port_id_0, rule_id)
>
> + def get_vm_testpmd_by_mask(self, mask):
> + vm_id = int(mask, base=16) - 1
> + return getattr(self, "vm%d_testpmd" % vm_id)
> +
> def test_two_vms_vlan_mirror(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> @@ -767,10 +822,15 @@ class TestSriovKvm(TestCase):
> vf_mask = '0x1'
> packet_num = 10
>
> - self.host_testpmd.execute_cmd(
> - 'rx_vlan add %d port %d vf %s' % (vlan_id, port_id_0,
> vf_mask))
> + if self.nic.startswith('fortville'):
> + vm_testpmd = self.get_vm_testpmd_by_mask(vf_mask)
> + vm_testpmd.execute_cmd('rx_vlan add %d %d' % (vlan_id,
> port_id_0))
> + else:
> + self.host_testpmd.execute_cmd(
> + 'rx_vlan add %d port %d vf %s' % (vlan_id, port_id_0,
> vf_mask))
> rule_id = self.set_port_vlan_mirror(port_id_0, '0 dst-pool 1 on')
>
> + vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> ether_ip = {}
> ether_ip['dot1q'] = {'vlan': '%d' % vlan_id}
> @@ -781,8 +841,10 @@ class TestSriovKvm(TestCase):
> count=packet_num,
> **ether_ip)
> vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> + vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
>
> vm1_ret_stats = self.calculate_stats(vm1_start_stats,
> vm1_end_stats)
> + vm0_ret_stats = self.calculate_stats(vm0_start_stats,
> vm0_end_stats)
>
> self.verify(vm1_ret_stats['RX-packets'] == packet_num and
> vm1_ret_stats['TX-packets'] == packet_num,
> @@ -799,8 +861,12 @@ class TestSriovKvm(TestCase):
> vf_mask = '0x2'
> packet_num = 10
>
> - self.host_testpmd.execute_cmd(
> - 'rx_vlan add %d port %d vf %s' % (vlan_id, port_id_0,
> vf_mask))
> + if self.nic.startswith("fortville"):
> + vm_testpmd = self.get_vm_testpmd_by_mask(vf_mask)
> + vm_testpmd.execute_cmd('rx_vlan add %d %d' % (vlan_id,
> port_id_0))
> + else:
> + self.host_testpmd.execute_cmd(
> + 'rx_vlan add %d port %d vf %s' % (vlan_id, port_id_0,
> vf_mask))
> self.set_port_pool_mirror(port_id_0, '0x1 dst-pool 1 on')
> self.set_port_vlan_mirror(port_id_0, '%d dst-pool 0 on' % vlan_id)
>
> @@ -897,12 +963,13 @@ class TestSriovKvm(TestCase):
> vf_mask = '0x2'
> packet_num = 1
>
> + if self.nic.startswith('fortville'):
> + vm_testpmd = self.get_vm_testpmd_by_mask(vf_mask)
> + else:
> + self.host_testpmd.execute_cmd("rx_vlan add %d port %d vf %s" %
> + (vlan_id, port_id_0, vf_mask))
> self.set_port_downlink_mirror(port_id_0, 'dst-pool 1 on')
> self.set_port_uplink_mirror(port_id_0, 'dst-pool 1 on')
> - self.host_testpmd.execute_cmd("rx_vlan add %d port %d vf %s" %
> - (vlan_id, port_id_0, vf_mask))
> - self.set_port_vlan_mirror(port_id_0, '%d dst-pool 0 on' % vlan_id)
> - self.set_port_pool_mirror(port_id_0, '0x1 dst-pool 1 on')
>
> self.vm1_testpmd.execute_cmd('set fwd rxonly')
> self.vm1_testpmd.execute_cmd('start')
> @@ -924,6 +991,7 @@ class TestSriovKvm(TestCase):
> self.vm0_testpmd.execute_cmd('start')
> vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> + host_start_stats = self.host_testpmd.get_pmd_stats(port_id_0)
> self.send_packet(
> self.vm_dut_0,
> self.vm0_dut_ports,
> @@ -931,9 +999,11 @@ class TestSriovKvm(TestCase):
> count=packet_num)
> vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
> + host_end_stats = self.host_testpmd.get_pmd_stats(port_id_0)
>
> vm0_ret_stats = self.calculate_stats(vm0_start_stats,
> vm0_end_stats)
> vm1_ret_stats = self.calculate_stats(vm1_start_stats,
> vm1_end_stats)
> + host_ret_stats = self.calculate_stats(host_start_stats,
> host_end_stats)
>
> self.verify(vm0_ret_stats['RX-packets'] == packet_num and
> vm0_ret_stats['TX-packets'] == packet_num and
> @@ -978,8 +1048,11 @@ class TestSriovKvm(TestCase):
> packet_num = 10
>
> for vf_mac in ["00:11:22:33:44:55", "00:55:44:33:22:11"]:
> - self.host_testpmd.execute_cmd("mac_addr add port %d
> vf %d %s" %
> - (port_id_0, vf_num, vf_mac))
> + if self.nic.startswith('niantic'):
> + set_mac_cmd = "mac_addr add port %d vf %d %s"
> + elif self.nic.startswith('fortville'):
> + set_mac_cmd = "set port %d vf %d %s exact-mac-vlan on"
Only two logical judgments can't cover all cases. Just for an example, one nic like sageville won't cover by the logic.
I think the better way is to abstract mac setting function in dedicated module.
> + self.host_testpmd.execute_cmd(set_mac_cmd % (port_id_0,
> vf_num, vf_mac))
>
> vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> ether_ip = {}
> @@ -999,6 +1072,7 @@ class TestSriovKvm(TestCase):
> "Add exact MAC %s failed btween VF0 and VF1" %
> vf_mac +
> "when add multi exact MAC address on VF!")
>
> + @skip_func
> def test_two_vms_enalbe_or_disable_one_uta_mac_on_vf(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> @@ -1045,6 +1119,7 @@ class TestSriovKvm(TestCase):
> "Disable one uta MAC failed between VM0 and VM1 " +
> "when enable or disable one uta MAC address on VF!")
>
> + @skip_func
> def test_two_vms_add_multi_uta_mac_on_vf(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> @@ -1073,15 +1148,22 @@ class TestSriovKvm(TestCase):
> "Add MULTI uta MAC %s failed between VM0 and VM1
> " % vf_mac +
> "when add multi uta MAC address on VF!")
>
> + @skip_func
> def test_two_vms_add_or_remove_uta_mac_on_vf(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
>
> port_id_0 = 0
> - vf_mac = "00:55:44:33:22:11"
> packet_num = 10
> + on_time = 0
>
> for switch in ['on', 'off', 'on']:
> + if switch == 'on':
> + if on_time == 0:
> + vf_mac = "00:55:44:33:22:11"
> + on_time += 1
> + else:
> + vf_mac = "00:11:22:33:44:55"
> self.host_testpmd.execute_cmd("set port %d uta %s %s" %
> (port_id_0, vf_mac, switch))
>
> @@ -1108,6 +1190,7 @@ class TestSriovKvm(TestCase):
> "Remove MULTI uta MAC %s failed between VM0
> and VM1 " % vf_mac +
> "when add or remove multi uta MAC address on
> VF!")
>
> + @skip_func
> def test_two_vms_pause_rx_queues(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> @@ -1140,6 +1223,7 @@ class TestSriovKvm(TestCase):
> "Pause RX queues failed between VM0 and VM1 "
> +
> "when enable or pause RX queues on VF!")
>
> + @skip_func
> def test_two_vms_pause_tx_queuse(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> @@ -1175,6 +1259,7 @@ class TestSriovKvm(TestCase):
> "Pause TX queues failed between VM0 and VM1 "
> +
> "when enable or pause TX queues on VF!")
>
> + @skip_func
> def test_two_vms_prevent_rx_broadcast_on_vf(self):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
> @@ -1214,24 +1299,40 @@ class TestSriovKvm(TestCase):
> self.setup_2vm_2vf_env()
> self.setup_two_vm_common_prerequisite()
>
> - for command in ["set port 0 vf 65 tx on",
> - "set port 2 vf -1 tx off",
> - "set port 0 vf 0 rx oneee",
> - "set port 0 vf 0 rx offdd",
> - "set port 0 vf 64 rxmode BAM on",
> - "set port 0 vf 64 rxmode BAM off",
> - "set port 0 uta 00:11:22:33:44 on",
> - "set port 7 uta 00:55:44:33:22:11 off",
> - "set port 0 vf 34 rxmode ROPE on",
> - "mac_addr add port 0 vf 65 00:55:44:33:22:11",
> - "mac_addr add port 5 vf 0 00:55:44:88:22:11",
> - "set port 0 mirror-rule 0xf uplink-mirror dst-
> pool 1 on",
> - "set port 0 mirror-rule 2 vlan-mirror 9 dst-pool
> 1 on",
> - "set port 0 mirror-rule 0 downlink-mirror 0xf
> dst-pool 2 off",
> - "reset port 0 mirror-rule 4",
> - "reset port 0xff mirror-rule 0"]:
> + public_commands = ["set port 0 vf 65 tx on",
> + "set port 2 vf -1 tx off",
> + "set port 0 vf 0 rx oneee",
> + "set port 0 vf 0 rx offdd",
> + "set port 0 vf 64 rxmode BAM on",
> + "set port 0 vf 64 rxmode BAM off",
> + "set port 0 uta 00:11:22:33:44 on",
> + "set port 7 uta 00:55:44:33:22:11 off",
> + "set port 0 vf 34 rxmode ROPE on",
> + "mac_addr add port 0 vf 65 00:55:44:33:22:11",
> + "mac_addr add port 5 vf 0 00:55:44:88:22:11",
> + "set port 0 mirror-rule 0 downlink-mirror 0xf
> dst-pool 2 off",
> + "reset port 0xff mirror-rule 0"]
> + niantic_specify_commands = ["set port 0 mirror-rule 0xf uplink-
> mirror dst-pool 1 on",
> + "set port 0 mirror-rule 2 vlan-mirror
> 9 dst-pool 1 on",
> + "reset port 0 mirror-rule 4"]
> + fortville_specify_commands = ["set port 0 mirror-rule 2 vlan-
> mirror 65 dst-pool 1 on"]
> +
These commands look like hard code, please add more comments.
> + if self.nic.startswith('nantic'):
> + verify_commands = public_commands + \
> + niantic_specify_commands
> + elif self.nic.startswith('fortville'):
> + verify_commands = public_commands + \
> + fortville_specify_commands
> + else:
> + verify_commands = public_commands
> +
> + for command in verify_commands:
> output = self.host_testpmd.execute_cmd(command)
> + print output
> error = False
>
> for error_regx in [r'Bad', r'bad', r'failed', r'-[0-9]+',
> r'error', r'Invalid']:
> ret_regx = re.search(error_regx, output)
> --
> 1.9.3
prev parent reply other threads:[~2016-05-23 20:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 2:59 Lijuan Tu
2016-05-23 20:46 ` Liu, Yong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E2221B879@SHSMSX103.ccr.corp.intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=lijuanx.a.tu@intel.com \
--cc=qian.q.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).