From: "Liu, Yong" <yong.liu@intel.com>
To: "Xu, HuilongX" <huilongx.xu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Xu, HuilongX" <huilongx.xu@intel.com>
Subject: Re: [dts] [PATCH V1] update dump test suite
Date: Tue, 9 Aug 2016 05:14:20 +0000 [thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E2226B626@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1470643881-3347-1-git-send-email-huilongx.xu@intel.com>
Huilong, two comments below.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,huilong
> Sent: Monday, August 08, 2016 4:11 PM
> To: dts@dpdk.org
> Cc: Xu, HuilongX
> Subject: [dts] [PATCH V1] update dump test suite
>
> update list:
> 1. discard test_log_dump, because this function remove in dpdk.org
> 2. update ring_dump/mempool_dump case, ignore get ring/mempool struct info.
> because ring struct is a internal struct, only get ring/mempool name.
> and check.
> 3. update dump_devargs case. update get pci address from portsInfo
>
> Signed-off-by: xu,huilong <huilongx.xu@intel.com>
> ---
> tests/TestSuite_unit_tests_dump.py | 38 ++++++++++++++++-----------------
> -----
> 1 file changed, 16 insertions(+), 22 deletions(-)
>
> diff --git a/tests/TestSuite_unit_tests_dump.py
> b/tests/TestSuite_unit_tests_dump.py
> index afdc256..26299f0 100644
> --- a/tests/TestSuite_unit_tests_dump.py
> +++ b/tests/TestSuite_unit_tests_dump.py
> @@ -72,7 +72,7 @@ class TestUnitTestsDump(TestCase):
> """
> pass
>
> - def test_log_dump(self):
> + def discard_test_log_dump(self):
> """
> Run history log dump test case.
> """
> @@ -86,40 +86,31 @@ class TestUnitTestsDump(TestCase):
> Run history log dump test case.
> """
> self.dut.send_expect("./%s/app/test -n 1 -c ffff" % (self.target),
> "R.*T.*E.*>.*>", self.start_test_time)
> + self.dut.send_expect("mempool_autotest", "RTE>>",
> self.run_cmd_time * 2)
> out = self.dut.send_expect("dump_ring", "RTE>>",
> self.run_cmd_time)
> self.dut.send_expect("quit", "# ")
> - elements = ['ring', 'address', 'flags', 'size', 'ct', 'ch', 'pt',
> 'ph', 'used', 'avail', 'watermark']
> + elements = ['ring', 'flags', 'size', 'ct', 'ch', 'pt', 'ph',
> 'used', 'avail', 'watermark']
> match_regex = "ring <(.*?)>@0x(.*)\r\n"
> - for element in elements[2:]:
> - match_regex += " %s=(\d*)\r\n" % element
> m = re.compile(r"%s" % match_regex, re.S)
> result = m.search(out)
> - ring_info = dict(zip(elements, result.groups()))
> + ring_info = result.groups()
>
> - self.verify(ring_info['ring'] == 'MP_log_history', "Test failed")
> + self.verify(len(ring_info) == 2, "dump ring name failed")
>
Only check ring number is not enough, we'd better also check expected ring name.
> def test_mempool_dump(self):
> """
> Run mempool dump test case.
> """
> self.dut.send_expect("./%s/app/test -n 1 -c ffff" % (self.target),
> "R.*T.*E.*>.*>", self.start_test_time)
> + self.dut.send_expect("mempool_autotest", "RTE>>",
> self.run_cmd_time * 2)
> out = self.dut.send_expect("dump_mempool", "RTE>>",
> self.run_cmd_time * 2)
> self.dut.send_expect("quit", "# ")
> - elements = ['mempool', 'flags', 'ring', 'phys_addr',
> 'nb_mem_chunks', 'size', 'populated_size', 'header_size', 'elt_size',
> - 'trailer_size', 'total_obj_size', 'private_data_size',
> 'avg bytes/object', 'cache infos','cache_size', 'common_pool_count']
> match_regex = "mempool <(.*?)>@0x(.*?)\r\n"
> - for element in elements[1:]:
> - if element == 'cache_size':
> - match_regex += " %s=(.*?)\r\n" % element
> - elif element == 'cache infos':
> - match_regex += " %s:\r\n" % element
> - else:
> - match_regex += " %s=(.*?)\r\n" % element
> m = re.compile(r"%s" % match_regex, re.S)
> result = m.search(out)
> - mempool_info = dict(zip(elements, result.groups()))
> + mempool_info = result.groups()
>
> - self.verify(mempool_info['mempool'] == 'log_history', "Test
> failed")
> + self.verify(len(mempool_info) == 2, "dump mempool name failed")
>
> def test_physmem_dump(self):
> """
> @@ -185,19 +176,22 @@ class TestUnitTestsDump(TestCase):
> Run devargs dump test case.
> """
> test_port = self.dut_ports[0]
> - self.dut.send_expect("./%s/app/test -n 1 -c ffff -b %s"
> - % (self.target,
> self.dut.ports_info[test_port]['pci']), "R.*T.*E.*>.*>",
> self.start_test_time)
> + pci_address = self.dut.ports_info[test_port]['pci'];
> + if not pci_address.startswith('0000:'):
> + pci_address = '0000:' + pci_address
> + self.dut.send_expect("./%s/app/test -n 1 -c ffff -b %s"
> + % (self.target, pci_address),
pci_address should be correct, framework has been added domain id into pci address.
> "R.*T.*E.*>.*>", self.start_test_time)
> out = self.dut.send_expect("dump_devargs", "RTE>>",
> self.run_cmd_time * 2)
> self.dut.send_expect("quit", "# ")
> - black_str = "PCI blacklist %s" %
> self.dut.ports_info[test_port]['pci']
> + black_str = "PCI blacklist %s" % pci_address
> self.verify(black_str in out, "Dump black list failed")
>
> self.dut.send_expect("./%s/app/test -n 1 -c ffff -w %s"
> - % (self.target,
> self.dut.ports_info[test_port]['pci']), "R.*T.*E.*>.*>",
> self.start_test_time)
> + % (self.target, pci_address),
> "R.*T.*E.*>.*>", self.start_test_time)
> out = self.dut.send_expect("dump_devargs", "RTE>>",
> self.run_cmd_time * 2)
> self.dut.send_expect("quit", "# ")
>
> - white_str = "PCI whitelist %s" %
> self.dut.ports_info[test_port]['pci']
> + white_str = "PCI whitelist %s" % pci_address
> self.verify(white_str in out, "Dump white list failed")
>
> def tear_down(self):
> --
> 1.9.3
next prev parent reply other threads:[~2016-08-09 5:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-08 8:11 xu,huilong
2016-08-09 5:14 ` Liu, Yong [this message]
2016-08-09 5:47 ` Xu, HuilongX
2016-08-09 9:56 ` Liu, Yong
2016-08-10 7:50 ` Xu, HuilongX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E2226B626@SHSMSX103.ccr.corp.intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=huilongx.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).