test suite reviews and discussions
 help / color / mirror / Atom feed
From: "Liu, Yong" <yong.liu@intel.com>
To: "Tu, LijuanX A" <lijuanx.a.tu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Tu, LijuanX A" <lijuanx.a.tu@intel.com>
Subject: Re: [dts] [PATCH v2]vf_packet_rxtx: optimize test case
Date: Wed, 23 Nov 2016 05:02:41 +0000	[thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E6032E9A9@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1479795052-9133-1-git-send-email-lijuanx.a.tu@intel.com>

Thanks, applied.

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Lijuan Tu
> Sent: Tuesday, November 22, 2016 2:11 PM
> To: dts@dpdk.org
> Cc: Tu, LijuanX A
> Subject: [dts] [PATCH v2]vf_packet_rxtx: optimize test case
> 
>  1,all nic should enable vf crc-strip ,not just forville,
>    because of HW not support
>    Refer: http://dpdk.org/dev/patchwork/patch/16980/
>  2, enable pf(igb_uio) crc-strip (DPDK-1755)
>     To make share pf & vf behavior the same
>  3, fix grammatical & logic error
> 
> Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
> ---
>  tests/TestSuite_vf_packet_rxtx.py | 47 ++++++++++++++++------------------
> -----
>  1 file changed, 19 insertions(+), 28 deletions(-)
> 
> diff --git a/tests/TestSuite_vf_packet_rxtx.py
> b/tests/TestSuite_vf_packet_rxtx.py
> index 25b03eb..62d3a3c 100644
> --- a/tests/TestSuite_vf_packet_rxtx.py
> +++ b/tests/TestSuite_vf_packet_rxtx.py
> @@ -46,12 +46,13 @@ class TestVfPacketRxtx(TestCase):
>              vf0_prop = {'opt_host': self.sriov_vfs_port_0[0].pci}
>              vf1_prop = {'opt_host': self.sriov_vfs_port_1[0].pci}
> 
> +
>              if driver == 'igb_uio':
>                  # start testpmd without the two VFs on the host
>                  self.host_testpmd = PmdOutput(self.dut)
>                  eal_param = '-b %(vf0)s -b %(vf1)s' % {'vf0':
> self.sriov_vfs_port_0[0].pci,
>                                                         'vf1':
> self.sriov_vfs_port_1[0].pci}
> -                self.host_testpmd.start_testpmd("1S/2C/2T",
> eal_param=eal_param)
> +                self.host_testpmd.start_testpmd("1S/2C/2T", "--crc-strip",
> eal_param=eal_param)
> 
>              # set up VM0 ENV
>              self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_packet_rxtx')
> @@ -69,9 +70,10 @@ class TestVfPacketRxtx(TestCase):
>      def destroy_2pf_2vf_1vm_env(self):
>          if getattr(self, 'vm0', None):
>              #destroy testpmd in vm0
> -            self.vm0_testpmd.execute_cmd('stop')
> -            self.vm0_testpmd.execute_cmd('quit', '# ')
> -            self.vm0_testpmd = None
> +            if getattr(self, 'vm0_testpmd', None):
> +                self.vm0_testpmd.execute_cmd('stop')
> +                self.vm0_testpmd.execute_cmd('quit', '# ')
> +                self.vm0_testpmd = None
>              self.vm0_dut_ports = None
>              #destroy vm0
>              self.vm0.stop()
> @@ -81,13 +83,13 @@ class TestVfPacketRxtx(TestCase):
>              self.host_testpmd.execute_cmd('quit', '# ')
>              self.host_testpmd = None
> 
> -        if getattr(self, 'used_dut_port_0', None):
> +        if getattr(self, 'used_dut_port_0', None) != None:
>              self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_0)
>              port = self.dut.ports_info[self.used_dut_port_0]['port']
>              port.bind_driver()
>              self.used_dut_port_0 = None
> 
> -        if getattr(self, 'used_dut_port_1', None):
> +        if getattr(self, 'used_dut_port_1', None) != None:
>              self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_1)
>              port = self.dut.ports_info[self.used_dut_port_1]['port']
>              port.bind_driver()
> @@ -110,14 +112,7 @@ class TestVfPacketRxtx(TestCase):
>          self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
>          port_id_0 = 0
>          self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> -        if self.kdriver == "i40e":
> -            self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> -        else:
> -            self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> -        self.vm0_testpmd.execute_cmd('port stop all')
> -        self.vm0_testpmd.execute_cmd('port config all crc-strip on')
> -        self.vm0_testpmd.execute_cmd('port start all')
> -        self.vm0_testpmd.execute_cmd('show port info all')
> +        self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
>          pmd_vf0_mac = self.vm0_testpmd.get_port_mac(port_id_0)
>          self.vm0_testpmd.execute_cmd('set fwd mac')
>          self.vm0_testpmd.execute_cmd('start')
> @@ -199,8 +194,9 @@ class TestVfPacketRxtx(TestCase):
> 
>      def destroy_3vf_2vm_env(self):
>          if getattr(self, 'vm0', None):
> -            self.vm0_testpmd.execute_cmd('stop')
> -            self.vm0_testpmd.execute_cmd('quit', '# ')
> +            if getattr(self, 'vm0_testpmd', None):
> +                self.vm0_testpmd.execute_cmd('stop')
> +                self.vm0_testpmd.execute_cmd('quit', '# ')
>              self.vm0_testpmd = None
>              self.vm0_dut_ports = None
>              self.vm_dut_0 = None
> @@ -208,19 +204,20 @@ class TestVfPacketRxtx(TestCase):
>              self.vm0 = None
> 
>          if getattr(self, 'vm1', None):
> -            self.vm1_testpmd.execute_cmd('stop')
> -            self.vm1_testpmd.execute_cmd('quit', '# ')
> +            if getattr(self, 'vm1_testpmd', None):
> +                self.vm1_testpmd.execute_cmd('stop')
> +                self.vm1_testpmd.execute_cmd('quit', '# ')
>              self.vm1_testpmd = None
>              self.vm1_dut_ports = None
>              self.vm_dut_1 = None
>              self.vm1.stop()
>              self.vm1 = None
> 
> -        if getattr(self, 'host_testpmd', None):
> +        if getattr(self, 'host_testpmd', None) != None:
>              self.host_testpmd.execute_cmd('quit', '# ')
>              self.host_testpmd = None
> 
> -        if getattr(self, 'used_dut_port', None):
> +        if getattr(self, 'used_dut_port', None) != None:
>              self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
>              port = self.dut.ports_info[self.used_dut_port]['port']
>              port.bind_driver()
> @@ -243,10 +240,7 @@ class TestVfPacketRxtx(TestCase):
>          port_id_1 = 1
> 
>          self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> -        if self.kdriver == "i40e":
> -            self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> -        else:
> -            self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> +        self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
>          self.vm0_testpmd.execute_cmd('show port info all')
>          pmd0_vf0_mac = self.vm0_testpmd.get_port_mac(port_id_0)
>          self.vm0_testpmd.execute_cmd('set fwd mac')
> @@ -255,10 +249,7 @@ class TestVfPacketRxtx(TestCase):
>          time.sleep(2)
> 
>          self.vm1_testpmd = PmdOutput(self.vm_dut_1)
> -        if self.kdriver == "i40e":
> -            self.vm1_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> -        else:
> -            self.vm1_testpmd.start_testpmd(VM_CORES_MASK)
> +        self.vm1_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
>          self.vm1_testpmd.execute_cmd('show port info all')
> 
>          tx_port = self.tester.get_local_port(self.dut_ports[0])
> --
> 1.9.3

      reply	other threads:[~2016-11-23  5:02 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-22  6:10 Lijuan Tu
2016-11-23  5:02 ` Liu, Yong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E6032E9A9@SHSMSX103.ccr.corp.intel.com \
    --to=yong.liu@intel.com \
    --cc=dts@dpdk.org \
    --cc=lijuanx.a.tu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).