From: "Liu, Yong" <yong.liu@intel.com>
To: "Xu, GangX" <gangx.xu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Xu, GangX" <gangx.xu@intel.com>
Subject: Re: [dts] [PATCH V2] add test suite of hotplug
Date: Wed, 23 Nov 2016 06:59:42 +0000 [thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E6032EAE5@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1479871429-11051-2-git-send-email-gangx.xu@intel.com>
Gang, some comments below.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,gang
> Sent: Wednesday, November 23, 2016 11:24 AM
> To: dts@dpdk.org
> Cc: Xu, GangX
> Subject: [dts] [PATCH V2] add test suite of hotplug
>
> Signed-off-by: xu,gang <gangx.xu@intel.com>
> ---
> tests/TestSuite_hotplug.py | 153
> +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 153 insertions(+)
> create mode 100644 tests/TestSuite_hotplug.py
>
> diff --git a/tests/TestSuite_hotplug.py b/tests/TestSuite_hotplug.py
> new file mode 100644
> index 0000000..0945dfd
> --- /dev/null
> +++ b/tests/TestSuite_hotplug.py
> @@ -0,0 +1,153 @@
> +#BSD LICENSE
> +#
> +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +"""
> +DPDK Test suite.
> +Test port hot plug.
> +"""
> +
> +import string
> +import time
> +import re
> +import utils
> +from test_case import TestCase
> +from plotting import Plotting
> +from settings import HEADER_SIZE
> +from etgen import IxiaPacketGenerator
> +from packet import Packet, sniff_packets, load_sniff_packets
> +
> +class TestPortHotPlug(TestCase):
> + """
> + This feature only supports igb_uio now and not support freebsd
> + """
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
> + cores = self.dut.get_core_list("1S/4C/1T")
> + self.coremask = utils.create_mask(cores)
> + self.port = len(self.dut_ports) - 1
> + def set_up(self):
Should be one blank line between functions in class.
> + """
> + Run before each test case.
> + """
> + self.dut.send_expect("./tools/dpdk-devbind.py -u %s" %
> self.dut.ports_info[self.port]['pci'],"#",60)
> +
> + def attach(self, port):
> + """
> + attach port
> + """
> + self.dut.send_expect("port attach %s" %
> self.dut.ports_info[port]['pci'],"is attached",60)
> + self.dut.send_expect("port start %s" % port,"Link Up",60)
> + self.dut.send_expect("show port info %s" % port,"testpmd>",60)
> +
> + def detach(self, port):
> + """
> + detach port
> + """
> + self.dut.send_expect("port stop %s" % port,"Link Down",60)
> + self.dut.send_expect("port close %s" % port,"Closing ports...",60)
> + self.dut.send_expect("port detach %s" % port,"is detached",60)
> +
> + def test_after_attach(self):
> + """
> + first run testpmd after attach port
> + """
> + cmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c %s -n %s -- -
> i" % (self.coremask,self.dut.get_memory_channels())
> + self.dut.send_expect(cmd,"testpmd>",60)
> + session_secondary = self.dut.new_session()
> + session_secondary.send_expect("./tools/dpdk-devbind.py --
> bind=igb_uio %s" % self.dut.ports_info[self.port]['pci'], "#", 60)
> + self.attach(self.port)
> + self.dut.send_expect("start","testpmd>",60)
> + self.dut.send_expect("port detach %s" % self.port,"Please close
> port first",60)
> + self.dut.send_expect("stop","testpmd>",60)
> + self.detach(self.port)
> + self.attach(self.port)
> +
> + self.dut.send_expect("start","testpmd>",60)
> + self.dut.send_expect("port detach %s" % self.port,"Please close
> port first",60)
> + self.send_packe(self.port)
> + out = self.dut.send_expect("show port stats %s" %
> self.port ,"testpmd>",60)
> + packet = re.search("RX-packets:\s*(\d*)",out)
> + sum_packet = packet.group(1)
> + self.verify(sum_packet = 1, "Insufficient the received package")
> + self.dut.send_expect("quit","#",60)
> +
> + def send_packe(self, port):
Should be send_packet.
> + """
> + Send a packet to port
> + """
> + self.dmac = self.dut.get_mac_address(self.dut_ports[0])
> + txport = self.tester.get_local_port(self.dut_ports[0])
> + self.txItf = self.tester.get_interface(txport)
> + pkt = Packet(pkt_type='UDP')
> + pkt.config_layer('ether', {'dst': self.dmac,})
> + pkt.send_pkt(tx_port=self.txItf)
> +
> + def test_before_attach(self):
> + """
> + first attach port after run testpmd
> + """
> + session_secondary = self.dut.new_session()
> + session_secondary.send_expect("./tools/dpdk-devbind.py --
> bind=igb_uio %s" % self.dut.ports_info[self.port]['pci'], "#", 60)
Should close this session after case finished.
> +
> + cmd = "./x86_64-native-linuxapp-gcc/app/testpmd -c %s -n %s -- -
> i" % (self.coremask,self.dut.get_memory_channels())
> + self.dut.send_expect(cmd,"testpmd>",60)
> + self.detach(self.port)
> + self.attach(self.port)
> + self.dut.send_expect("start","testpmd>",60)
> + self.dut.send_expect("port detach %s" % self.port, "Please close
> port first",60)
> + self.send_packe(self.port)
> + out = self.dut.send_expect("show port stats %s" %
> self.port ,"testpmd>",60)
> + packet = re.search("RX-packets:\s*(\d*)",out)
> + sum_packet = packet.group(1)
> + self.verify(sum_packet = 1, "Insufficient the received package")
> + self.dut.send_expect("quit","#",60)
> +
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.send_expect("./tools/dpdk-devbind.py --bind=igb_uio %s" %
> self.dut.ports_info[self.port]['pci'],"#",60)
> + self.dut.kill_all()
> + time.sleep(2)
> +
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> +
> --
> 1.9.3
next prev parent reply other threads:[~2016-11-23 6:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 3:23 [dts] [PATCH V2] add test suite of packet_ordering xu,gang
2016-11-23 3:23 ` [dts] [PATCH V2] add test suite of hotplug xu,gang
2016-11-23 6:59 ` Liu, Yong [this message]
2016-11-23 3:23 ` [dts] [PATCH V2] add test suite of l2fwd-jobstats xu,gang
2016-11-23 3:23 ` [dts] [PATCH V2] add test suite of ip_pipeline_config_file xu,gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E6032EAE5@SHSMSX103.ccr.corp.intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=gangx.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).