* [dts] [PATCH V2] test: add vhost/virtio pvp performance test based on qemu
@ 2016-12-21 8:27 lei,yao
2016-12-21 8:43 ` Liu, Yong
0 siblings, 1 reply; 2+ messages in thread
From: lei,yao @ 2016-12-21 8:27 UTC (permalink / raw)
To: dts; +Cc: lei yao
From: lei yao <lei.a.yao@intel.com>
The test case include 3 part:
1. virtio 0.95 performance test
virtio0.95 is the default version for qemu. Vector, normal, mergeable path will be tested on this version
2. Test vector performance on virtio 1.0.
Signed-off-by: lei yao <lei.a.yao@intel.com>
---
tests/TestSuite_vhost_qemu_pvp_performance.py | 311 ++++++++++++++++++++++++++
1 file changed, 311 insertions(+)
create mode 100644 tests/TestSuite_vhost_qemu_pvp_performance.py
diff --git a/tests/TestSuite_vhost_qemu_pvp_performance.py b/tests/TestSuite_vhost_qemu_pvp_performance.py
new file mode 100644
index 0000000..32f5c56
--- /dev/null
+++ b/tests/TestSuite_vhost_qemu_pvp_performance.py
@@ -0,0 +1,311 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+
+Vhost PVP performance using Qemu test suite.
+"""
+import os
+import re
+import time
+import utils
+from scapy.utils import wrpcap, rdpcap
+from test_case import TestCase
+from exception import VerifyFailure
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from qemu_kvm import QEMUKvm
+
+
+class TestVhostUserOneCopyOneVm(TestCase):
+
+ def set_up_all(self):
+ # Get and verify the ports
+ self.dut_ports = self.dut.get_ports()
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+
+ # Get the port's socket
+ self.pf = self.dut_ports[0]
+ netdev = self.dut.ports_info[self.pf]['port']
+ self.socket = netdev.get_nic_socket()
+ self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.socket)
+
+ # Set the params of vhost sample
+ self.vhost_app = "./examples/vhost/build/vhost-switch"
+ self.vm2vm = 0
+ # This parameter is used to define mergeable on/off
+ self.jumbo = 0
+
+ # Using file to save the vhost sample output since in jumboframe case,
+ # there will be lots of output
+ self.vhost_test = self.vhost_app + \
+ " -c %s -n %d --socket-mem 2048,2048 -- -p 0x1 --mergeable %d" + \
+ " --vm2vm %d --socket-file ./vhost-net > ./vhost.out &"
+ # build the vhost sample in vhost-user mode.
+ if self.nic in ['niantic']:
+ self.dut.send_expect(
+ "sed -i -e 's/#define MAX_QUEUES.*$/#define MAX_QUEUES 128/' "
+ "./examples/vhost/main.c",
+ "#", 10)
+ elif self.nic.startswith('fortville'):
+ self.dut.send_expect(
+ "sed -i -e 's/#define MAX_QUEUES.*$/#define MAX_QUEUES 512/' "
+ "./examples/vhost/main.c",
+ "#", 10)
+ out = self.dut.send_expect("make -C examples/vhost", "#")
+ self.verify("Error" not in out, "compilation error")
+ self.verify("No such file" not in out, "Not found file error")
+
+ self.virtio1 = "eth1"
+ self.virtio1_mac = "52:54:00:00:00:01"
+ self.src1 = "192.168.4.1"
+ self.dst1 = "192.168.3.1"
+ self.vm_dut = None
+
+ self.number_of_ports = 1
+ self.header_row = ["FrameSize(B)", "Throughput(Mpps)", "LineRate(%)", "Cycle"]
+ self.memory_channel = 4
+ # Specify the path of Qemu binary for different Qemu versions, user can modify this as necessary
+ self.qemu_path = ["/home/lei/qemu_install/qemu_2.5/bin/qemu-system-x86_64",
+ "/home/lei/qemu_install/qemu_2.6/bin/qemu-system-x86_64",
+ "/home/lei/qemu_install/qemu_2.7/bin/qemu-system-x86_64"]
+
+ def set_up(self):
+ #
+ # Run before each test case.
+ #
+ # Launch vhost sample using default params
+ #
+ self.dut.send_expect("rm -rf ./vhost.out", "#")
+ self.dut.send_expect("rm -rf ./vhost-net*", "#")
+ self.dut.send_expect("killall -s INT vhost-switch", "#")
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+ self.frame_sizes = [64, 128, 256, 512, 1024, 1500]
+ self.vm_testpmd_vector = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf01 --disable-hw-vlan-filter"
+ self.vm_testpmd_normal = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf00 --disable-hw-vlan-filter"
+
+ def launch_vhost_sample(self):
+ #
+ # Launch the vhost sample with different parameters
+ #
+ self.coremask = utils.create_mask(self.cores)
+ self.vhostapp_testcmd = self.vhost_test % (
+ self.coremask, self.memory_channel, self.jumbo, self.vm2vm)
+ self.dut.send_expect(self.vhostapp_testcmd, "# ", 40)
+ time.sleep(30)
+ try:
+ self.logger.info("Launch vhost sample:")
+ self.dut.session.copy_file_from(self.dut.base_dir + "vhost.out")
+ fp = open('./vhost.out', 'r')
+ out = fp.read()
+ fp.close()
+ if "Error" in out:
+ raise Exception("Launch vhost sample failed")
+ else:
+ self.logger.info("Launch vhost sample finished")
+ except Exception as e:
+ self.logger.error("ERROR: Failed to launch vhost sample: %s" % str(e))
+
+ def start_onevm(self, path="", modem=0):
+ #
+ # Start One VM with one virtio device
+ #
+
+ self.vm = QEMUKvm(self.dut, 'vm0', 'vhost_sample')
+ if(path != ""):
+ self.vm.set_qemu_emulator(path)
+ vm_params = {}
+ vm_params['driver'] = 'vhost-user'
+ vm_params['opt_path'] = './vhost-net'
+ vm_params['opt_mac'] = self.virtio1_mac
+ if(modem == 1):
+ vm_params['opt_settings'] = 'disable-modern=false'
+ self.vm.set_vm_device(**vm_params)
+
+ try:
+ self.vm_dut = self.vm.start()
+ if self.vm_dut is None:
+ raise Exception("Set up VM ENV failed")
+ except Exception as e:
+ self.logger.error("ERROR: Failure for %s" % str(e))
+
+ return True
+
+ def vm_testpmd_start(self):
+ #
+ # Start testpmd in vm
+ #
+ if self.vm_dut is not None:
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ def send_verify(self, case, frame_sizes, vlan_id1=0, tag="Performance"):
+ self.result_table_create(self.header_row)
+ for frame_size in frame_sizes:
+ info = "Running test %s, and %d frame size." % (case, frame_size)
+ self.logger.info(info)
+ payload = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ flow1 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio1_mac, vlan_id1, self.src1, self.dst1, payload)
+ self.tester.scapy_append('wrpcap("flow1.pcap", %s)' % flow1)
+ self.tester.scapy_execute()
+
+ tgenInput = []
+ port = self.tester.get_local_port(self.pf)
+ tgenInput.append((port, port, "flow1.pcap"))
+
+ _, pps = self.tester.traffic_generator_throughput(tgenInput, delay=30)
+ Mpps = pps / 1000000.0
+ pct = Mpps * 100 / float(self.wirespeed(self.nic, frame_size,
+ self.number_of_ports))
+ data_row = [frame_size, str(Mpps), str(pct), tag]
+ self.result_table_add(data_row)
+ self.result_table_print()
+
+ def test_perf_pvp_qemu_vector_pmd(self):
+ #
+ # Test the pvp performance for vector path
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm()
+
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "Virtio 0.95 Vector Performance")
+ self.vm_dut.kill_all()
+
+ def test_perf_pvp_qemu_normal_pmd(self):
+ #
+ # Test the performance for normal path
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm()
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_normal, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "Virtio 0.95 Normal Performance")
+ self.vm_dut.kill_all()
+
+ def test_perf_pvp_qemu_mergeable_pmd(self):
+ #
+ # Test the performance for mergeable path
+ #
+ # start testpmd on VM
+ self.jumbo = 1
+ self.launch_vhost_sample()
+ self.start_onevm()
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "Virtio 0.95 Mergeable Performance")
+ self.vm_dut.kill_all()
+
+ def test_perf_virtio_modern_qemu_vector_pmd(self):
+ #
+ # Test the vhost/virtio pvp performance for virtio1.0
+ #
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm("", 1)
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "virtio1.0, Vector")
+ self.vm_dut.kill_all()
+
+ def test_perf_virtio_modern_qemu_normal_pmd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm("", 1)
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_normal, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "virtio1.0, Normal")
+ self.vm_dut.kill_all()
+
+ def test_perf_virtio_modern_qemu_mergeable_pmd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+ # start testpmd on VM
+ self.jumbo = 1
+ self.launch_vhost_sample()
+ self.start_onevm("", 1)
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "virtio1.0, Mergeable")
+ self.vm_dut.kill_all()
+
+ def tear_down(self):
+ #
+ # Run after each test case.
+ # Clear vhost-switch and qemu to avoid blocking the following TCs
+ #
+ self.vm.stop()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.7.4
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH V2] test: add vhost/virtio pvp performance test based on qemu
2016-12-21 8:27 [dts] [PATCH V2] test: add vhost/virtio pvp performance test based on qemu lei,yao
@ 2016-12-21 8:43 ` Liu, Yong
0 siblings, 0 replies; 2+ messages in thread
From: Liu, Yong @ 2016-12-21 8:43 UTC (permalink / raw)
To: Yao, Lei A, dts; +Cc: Yao, Lei A
Hi Lei, remaining two comments.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lei,yao
> Sent: Wednesday, December 21, 2016 4:28 PM
> To: dts@dpdk.org
> Cc: Yao, Lei A
> Subject: [dts] [PATCH V2] test: add vhost/virtio pvp performance test
> based on qemu
>
> From: lei yao <lei.a.yao@intel.com>
>
> The test case include 3 part:
> 1. virtio 0.95 performance test
> virtio0.95 is the default version for qemu. Vector, normal, mergeable path
> will be tested on this version
> 2. Test vector performance on virtio 1.0.
>
> Signed-off-by: lei yao <lei.a.yao@intel.com>
> ---
> tests/TestSuite_vhost_qemu_pvp_performance.py | 311
> ++++++++++++++++++++++++++
> 1 file changed, 311 insertions(+)
> create mode 100644 tests/TestSuite_vhost_qemu_pvp_performance.py
>
> diff --git a/tests/TestSuite_vhost_qemu_pvp_performance.py
> b/tests/TestSuite_vhost_qemu_pvp_performance.py
> new file mode 100644
> index 0000000..32f5c56
> --- /dev/null
> +++ b/tests/TestSuite_vhost_qemu_pvp_performance.py
> +
> + self.number_of_ports = 1
> + self.header_row = ["FrameSize(B)", "Throughput(Mpps)",
> "LineRate(%)", "Cycle"]
> + self.memory_channel = 4
> + # Specify the path of Qemu binary for different Qemu versions,
> user can modify this as necessary
> + self.qemu_path = ["/home/lei/qemu_install/qemu_2.5/bin/qemu-
> system-x86_64",
> + "/home/lei/qemu_install/qemu_2.6/bin/qemu-
> system-x86_64",
> + "/home/lei/qemu_install/qemu_2.7/bin/qemu-
> system-x86_64"]
Please remove hard code path, its' better to use configuration file.
> +
> + def set_up(self):
> + #
> + # Run before each test case.
> + #
> + # Launch vhost sample using default params
> + #
> + self.dut.send_expect("rm -rf ./vhost.out", "#")
> + self.dut.send_expect("rm -rf ./vhost-net*", "#")
> + self.dut.send_expect("killall -s INT vhost-switch", "#")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> +
Please not direct killall qemu, maybe someone are using them for other usage. You can simple trust framework stop function.
If there's still has issue in kill qemu process, let's fix it in framework.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-12-21 8:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-21 8:27 [dts] [PATCH V2] test: add vhost/virtio pvp performance test based on qemu lei,yao
2016-12-21 8:43 ` Liu, Yong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).