From: "Liu, Yong" <yong.liu@intel.com>
To: "Peng, Yuan" <yuan.peng@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Peng, Yuan" <yuan.peng@intel.com>
Subject: Re: [dts] [PATCH] tests: veb_switch remove transit between vf and pf
Date: Thu, 8 Feb 2018 06:16:31 +0000 [thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E62F9C3FD@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1517903140-42927-1-git-send-email-yuan.peng@intel.com>
Yuan,
Please give the brief introduction in the commit log about what was changed in the suite.
Thanks,
Marvin
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Peng Yuan
> Sent: Tuesday, February 06, 2018 3:46 PM
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: [dts] [PATCH] tests: veb_switch remove transit between vf and pf
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
>
> diff --git a/tests/TestSuite_veb_switch.py b/tests/TestSuite_veb_switch.py
> index c1953e2..6e90745 100644
> --- a/tests/TestSuite_veb_switch.py
> +++ b/tests/TestSuite_veb_switch.py
> @@ -324,62 +324,10 @@ class TestVEBSwitching(TestCase):
> """
> DPDK PF, then create 2VFs, PF in the host running dpdk testpmd,
> VFs
> running dpdk testpmd, VF1 send traffic to VF2, check if VF2 can
> receive
> - the packets. send tracfic from PF to VF1, ensure PF->VF1; send
> traffic
> - from VF1 to PF, ensure VF1->PF can work.
> + the packets. send tracfic from tester to VF1, ensure outer
> tester->VF1
> + can work.
> """
> - # VF->PF
> self.setup_env(driver=self.drivername)
> - self.dut.send_expect("./%s/app/testpmd -c 0xf -n 4 --socket-mem
> 1024,1024 -w %s --file-prefix=test1 -- -i" % (self.target, self.pf_pci),
> "testpmd>", 120)
> - self.dut.send_expect("set fwd rxonly", "testpmd>")
> - self.dut.send_expect("set promisc all off", "testpmd>")
> - self.dut.send_expect("start", "testpmd>")
> - time.sleep(2)
> - self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0 -n 4
> --socket-mem 1024,1024 -w %s --file-prefix=test2 -- -i --eth-peer=0,%s" %
> (self.target, self.sriov_vfs_port[0].pci, self.pf_mac_address), "testpmd>",
> 120)
> - self.session_secondary.send_expect("set fwd txonly", "testpmd>")
> - self.session_secondary.send_expect("set promisc all off",
> "testpmd>")
> - self.session_secondary.send_expect("start", "testpmd>")
> - time.sleep(2)
> -
> - self.session_secondary.send_expect("stop", "testpmd>", 2)
> - self.dut.send_expect("stop", "testpmd>", 2)
> -
> - vf0_tx_stats = self.veb_get_pmd_stats("second", 0, "tx")
> - pf_rx_stats = self.veb_get_pmd_stats("first", 0, "rx")
> - self.verify(vf0_tx_stats[0] != 0, "no packet was sent by VF0")
> - self.verify(pf_rx_stats[0] != 0, "no packet was received by PF")
> - self.verify(vf0_tx_stats[0]*0.5 < pf_rx_stats[0], "PF failed to
> receive most packets from VF0")
> - self.session_secondary.send_expect("quit", "# ")
> - time.sleep(2)
> - self.dut.send_expect("quit", "# ")
> - time.sleep(2)
> -
> - #PF->VF
> - self.dut.send_expect("./%s/app/testpmd -c 0xf -n 4 --socket-mem
> 1024,1024 -w %s --file-prefix=test1 -- -i --eth-peer=0,%s" % (self.target,
> self.pf_pci, self.vf0_mac), "testpmd>", 120)
> - self.dut.send_expect("set fwd txonly", "testpmd>")
> - self.dut.send_expect("set promisc all off", "testpmd>")
> -
> - self.session_secondary.send_expect("./%s/app/testpmd -c 0xf0 -n 4
> --socket-mem 1024,1024 -w %s --file-prefix=test2 -- -i" % (self.target,
> self.sriov_vfs_port[0].pci), "testpmd>", 120)
> - self.session_secondary.send_expect("mac_addr add 0 %s" %
> self.vf0_mac, "testpmd>")
> - self.session_secondary.send_expect("set fwd rxonly", "testpmd>")
> - self.session_secondary.send_expect("set promisc all off",
> "testpmd>")
> - self.session_secondary.send_expect("start", "testpmd>")
> - time.sleep(2)
> - self.dut.send_expect("start", "testpmd>")
> - time.sleep(2)
> -
> - self.dut.send_expect("stop", "testpmd>", 2)
> - self.session_secondary.send_expect("stop", "testpmd>", 2)
> -
> - vf0_rx_stats = self.veb_get_pmd_stats("second", 0, "rx")
> - pf_tx_stats = self.veb_get_pmd_stats("first", 0, "tx")
> - self.verify(pf_tx_stats[0] != 0, "no packet was sent by PF")
> - self.verify(vf0_rx_stats[0] != 0, "no packet was received by VF0")
> - self.verify(vf0_rx_stats[0] > pf_tx_stats[0]*0.5, "VF0 failed to
> receive most packets from PF")
> - self.session_secondary.send_expect("quit", "# ")
> - time.sleep(2)
> - self.dut.send_expect("quit", "# ")
> - time.sleep(2)
> -
> # tester->VF
> self.dut.send_expect("./%s/app/testpmd -c 0xf -n 4 --socket-mem
> 1024,1024 -w %s --file-prefix=test1 -- -i" % (self.target, self.pf_pci),
> "testpmd>", 120)
> self.dut.send_expect("set fwd mac", "testpmd>")
> --
> 2.5.0
prev parent reply other threads:[~2018-02-08 6:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 7:45 Peng Yuan
2018-02-08 6:16 ` Liu, Yong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E62F9C3FD@SHSMSX103.ccr.corp.intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).