From: "Li, WenjieX A" <wenjiex.a.li@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Cc: "Zhang, YanX A" <yanx.a.zhang@intel.com>
Subject: Re: [dts] [PATCH V1] tests/tso: should stop ports before set csum
Date: Fri, 17 May 2019 01:26:12 +0000 [thread overview]
Message-ID: <8688172CD5C0B74590FAE19D9579F94B536E5DE8@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1558056527-52378-1-git-send-email-wenjiex.a.li@intel.com>
Tested-by: Zhang, YanX A <yanx.a.zhang@intel.com>
> -----Original Message-----
> From: Li, WenjieX A
> Sent: Friday, May 17, 2019 9:29 AM
> To: dts@dpdk.org
> Cc: Li, WenjieX A <wenjiex.a.li@intel.com>
> Subject: [dts][PATCH V1] tests/tso: should stop ports before set csum
>
> 1. should stop ports before set csum and start ports after the settings 2. there is
> no clear indication of which network card is not supported, will not check the nic
> type anymore 3. add tear_down and tear_down_all 4. delete unless
> comment/code
>
> Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
> ---
> tests/TestSuite_tso.py | 33 ++++++++++++++++++---------------
> 1 file changed, 18 insertions(+), 15 deletions(-)
>
> diff --git a/tests/TestSuite_tso.py b/tests/TestSuite_tso.py index
> 6735169..5e0dbd5 100644
> --- a/tests/TestSuite_tso.py
> +++ b/tests/TestSuite_tso.py
> @@ -51,13 +51,6 @@ class TestTSO(TestCase):
> """
> Run at the start of each test suite.
> """
> - # this feature support Fortville, Niantic
> - self.verify(self.nic in ["kawela_2", "niantic", "bartonhills", "82545EM",
> - "82540EM", "springfountain", "fortville_eagle",
> - "fortville_spirit", "fortville_spirit_single",
> - "redrockcanyou", "atwood", "boulderrapid",
> "fortpark_TLV","fortville_25g","hi1822", "cavium_a063"],
> - "NIC Unsupported: " + str(self.nic))
> -
> # Based on h/w type, choose how many ports to use
> self.dut_ports = self.dut.get_ports(self.nic)
>
> @@ -72,12 +65,6 @@ class TestTSO(TestCase):
> self.frame_sizes = [128, 1458]
> self.rxfreet_values = [0, 8, 16, 32, 64, 128]
>
> - # self.test_cycles = [{'cores': '1S/1C/1T', 'Mpps': {}, 'pct': {}},
> - # {'cores': '1S/1C/2T', 'Mpps': {}, 'pct': {}},
> - # {'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}},
> - # {'cores': '1S/2C/2T', 'Mpps': {}, 'pct': {}},
> - # {'cores': '1S/4C/2T', 'Mpps': {}, 'pct': {}}
> - # ]
> self.test_cycles = [{'cores': '1S/1C/2T', 'Mpps': {}, 'pct': {}}]
>
> self.table_header = ['Frame Size'] @@ -87,8 +74,6 @@ class
> TestTSO(TestCase):
>
> self.blacklist = ""
>
> - # self.coreMask = utils.create_mask(cores)
> -
> self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE[
> 'ip'] + HEADER_SIZE['tcp']
>
> @@ -160,6 +145,7 @@ class TestTSO(TestCase):
> cmd = "./%s/app/testpmd -c %s -n %d %s -- -i --rxd=512 --txd=512 --
> burst=32 --rxfreet=64 --mbcache=128 --portmask=%s --txpt=36 --txht=0 --
> txwt=0 --txfreet=32 --txrst=32 " % (self.target, self.coreMask,
> self.dut.get_memory_channels(), self.blacklist, self.portMask)
> self.dut.send_expect(cmd, "testpmd> ", 120)
> self.dut.send_expect("set verbose 1", "testpmd> ", 120)
> + self.dut.send_expect("port stop all", "testpmd> ", 120)
> self.dut.send_expect("csum set ip hw %d" % self.dut_ports[0], "testpmd> ",
> 120)
> self.dut.send_expect("csum set udp hw %d" % self.dut_ports[0], "testpmd>
> ", 120)
> self.dut.send_expect("csum set tcp hw %d" % self.dut_ports[0], "testpmd>
> ", 120) @@ -176,6 +162,7 @@ class TestTSO(TestCase):
>
> self.dut.send_expect("tso set 800 %d" % self.dut_ports[1], "testpmd> ",
> 120)
> self.dut.send_expect("set fwd csum", "testpmd> ", 120)
> + self.dut.send_expect("port start all", "testpmd> ", 120)
> self.dut.send_expect("start", "testpmd> ")
>
> self.tester.scapy_foreground()
> @@ -226,6 +213,7 @@ class TestTSO(TestCase):
> cmd = "./%s/app/testpmd -c %s -n %d %s -- -i --rxd=512 --txd=512 --
> burst=32 --rxfreet=64 --mbcache=128 --portmask=%s --txpt=36 --txht=0 --
> txwt=0 --txfreet=32 --txrst=32 " % (self.target, self.coreMask,
> self.dut.get_memory_channels(), self.blacklist, self.portMask)
> self.dut.send_expect(cmd, "testpmd> ", 120)
> self.dut.send_expect("set verbose 1", "testpmd> ", 120)
> + self.dut.send_expect("port stop all", "testpmd> ", 120)
> self.dut.send_expect("csum set ip hw %d" % self.dut_ports[0], "testpmd> ",
> 120)
> self.dut.send_expect("csum set udp hw %d" % self.dut_ports[0], "testpmd>
> ", 120)
> self.dut.send_expect("csum set tcp hw %d" % self.dut_ports[0], "testpmd>
> ", 120) @@ -242,6 +230,7 @@ class TestTSO(TestCase):
>
> self.dut.send_expect("tso set 800 %d" % self.dut_ports[1], "testpmd> ",
> 120)
> self.dut.send_expect("set fwd csum", "testpmd> ", 120)
> + self.dut.send_expect("port start all", "testpmd> ", 120)
> self.dut.send_expect("start", "testpmd> ")
>
> self.tester.scapy_foreground()
> @@ -295,6 +284,7 @@ class TestTSO(TestCase):
> self.rst_report(command_line + "\n\n", frame=True, annex=True)
>
> self.dut.send_expect(command_line, "testpmd> ", 120)
> + self.dut.send_expect("port stop all", "testpmd> ", 120)
> self.dut.send_expect("csum set ip hw %d" % self.dut_ports[0], "testpmd>
> ", 120)
> self.dut.send_expect("csum set udp hw %d" % self.dut_ports[0],
> "testpmd> ", 120)
> self.dut.send_expect("csum set tcp hw %d" % self.dut_ports[0], "testpmd>
> ", 120) @@ -309,6 +299,7 @@ class TestTSO(TestCase):
> self.dut.send_expect("csum parse-tunnel on %d" % self.dut_ports[1],
> "testpmd> ", 120)
> self.dut.send_expect("tso set 800 %d" % self.dut_ports[1], "testpmd> ",
> 120)
> self.dut.send_expect("set fwd csum", "testpmd> ", 120)
> + self.dut.send_expect("port start all", "testpmd> ", 120)
> self.dut.send_expect("start", "testpmd> ")
> for frame_size in self.frame_sizes:
> wirespeed = self.wirespeed(self.nic, frame_size, 2) @@ -350,3 +341,15
> @@ class TestTSO(TestCase):
> self.result_table_add(table_row)
>
> self.result_table_print()
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.kill_all()
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> --
> 2.17.2
next prev parent reply other threads:[~2019-05-17 1:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-17 1:28 Wenjie Li
2019-05-17 1:26 ` Li, WenjieX A [this message]
2019-05-17 1:26 ` Li, WenjieX A
2019-05-22 5:54 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8688172CD5C0B74590FAE19D9579F94B536E5DE8@SHSMSX103.ccr.corp.intel.com \
--to=wenjiex.a.li@intel.com \
--cc=dts@dpdk.org \
--cc=yanx.a.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).