From: "Li, WenjieX A" <wenjiex.a.li@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Cc: "Li, WenjieX A" <wenjiex.a.li@intel.com>
Subject: Re: [dts] [PATCH V1] tests: optimize three suites
Date: Mon, 11 Nov 2019 08:34:53 +0000 [thread overview]
Message-ID: <8688172CD5C0B74590FAE19D9579F94B537E3D6A@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1573492735-54128-1-git-send-email-wenjiex.a.li@intel.com>
[-- Attachment #1: Type: text/plain, Size: 4032 bytes --]
Tested-by: Li, WenjieX A <wenjiex.a.li@intel.com>
> -----Original Message-----
> From: Li, WenjieX A
> Sent: Tuesday, November 12, 2019 1:19 AM
> To: dts@dpdk.org
> Cc: Li, WenjieX A <wenjiex.a.li@intel.com>
> Subject: [dts][PATCH V1] tests: optimize three suites
>
> ensure the DUT port is up before the tester send packets in below suites:
> tests/TestSuite_metering_and_policing.py
> tests/TestSuite_short_live.py
> tests/TestSuite_tx_preparation.py
>
> Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
> ---
> tests/TestSuite_metering_and_policing.py | 8 ++++++--
> tests/TestSuite_short_live.py | 12 ++++++++++++
> tests/TestSuite_tx_preparation.py | 5 +++++
> 3 files changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/tests/TestSuite_metering_and_policing.py
> b/tests/TestSuite_metering_and_policing.py
> index 77da805..ef8c419 100644
> --- a/tests/TestSuite_metering_and_policing.py
> +++ b/tests/TestSuite_metering_and_policing.py
> @@ -42,7 +42,7 @@ from test_case import TestCase from plotting import
> Plotting from settings import HEADER_SIZE from dut import Dut
> -
> +from pmd_output import PmdOutput
>
> class TestMeteringAndPolicing(TestCase):
> scapyCmds = []
> @@ -244,7 +244,11 @@ class TestMeteringAndPolicing(TestCase):
> """
> Send packet and check the stats. If expect_port == -1, the packet should be
> dropped.
> """
> - time.sleep(3)
> + # check the ports are UP before sending packets
> + self.pmd_out = PmdOutput(self.dut)
> + res = self.pmd_out.wait_link_status_up('all', 15)
> + self.verify(res is True, 'there have port link is down')
> +
> rx_before = []
> tx_before = []
> for i in range(0, len(self.dut_ports)):
> diff --git a/tests/TestSuite_short_live.py b/tests/TestSuite_short_live.py index
> 4e1ee15..dfccbd8 100644
> --- a/tests/TestSuite_short_live.py
> +++ b/tests/TestSuite_short_live.py
> @@ -141,6 +141,12 @@ class TestShortLiveApp(TestCase):
> self.dut.send_expect("set fwd mac", "testpmd>")
> self.dut.send_expect("set promisc all off", "testpmd>")
> self.dut.send_expect("start", "testpmd>")
> +
> + # check the ports are UP before sending packets
> + self.pmd_out = PmdOutput(self.dut)
> + res = self.pmd_out.wait_link_status_up('all', 15)
> + self.verify(res is True, 'there have port link is down')
> +
> self.check_forwarding([0, 1], self.nic)
>
> def test_start_up_time(self):
> @@ -166,6 +172,12 @@ class TestShortLiveApp(TestCase):
> self.dut.send_expect("set fwd mac", "testpmd>")
> self.dut.send_expect("set promisc all off", "testpmd>")
> self.dut.send_expect("start", "testpmd>")
> +
> + # check the ports are UP before sending packets
> + self.pmd_out = PmdOutput(self.dut)
> + res = self.pmd_out.wait_link_status_up('all', 15)
> + self.verify(res is True, 'there have port link is down')
> +
> self.check_forwarding([0, 1], self.nic)
>
> # kill with different Signal diff --git a/tests/TestSuite_tx_preparation.py
> b/tests/TestSuite_tx_preparation.py
> index 366a547..90ab7b6 100644
> --- a/tests/TestSuite_tx_preparation.py
> +++ b/tests/TestSuite_tx_preparation.py
> @@ -116,6 +116,11 @@ class TestTX_preparation(TestCase):
> """
> Send packet to portid and output
> """
> + # check the ports are UP before sending packets
> + self.pmd_out = PmdOutput(self.dut)
> + res = self.pmd_out.wait_link_status_up('all', 15)
> + self.verify(res is True, 'there have port link is down')
> +
> LrgLength = random.randint(Normal_mtu, Max_mtu-100)
> pkts = {'IPv4/cksum TCP': 'Ether(dst="%s")/IP()/TCP(flags=0x10)\
> /Raw(RandString(50))' % self.dmac,
> --
> 2.17.1
[-- Attachment #2: TestMeteringAndPolicing.log --]
[-- Type: application/octet-stream, Size: 1172832 bytes --]
[-- Attachment #3: TestShortLiveApp.log --]
[-- Type: application/octet-stream, Size: 195175 bytes --]
[-- Attachment #4: TestTX_preparation.log --]
[-- Type: application/octet-stream, Size: 141679 bytes --]
next prev parent reply other threads:[~2019-11-11 8:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-11 17:18 Wenjie Li
2019-11-11 8:34 ` Li, WenjieX A [this message]
2019-11-22 6:21 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8688172CD5C0B74590FAE19D9579F94B537E3D6A@SHSMSX103.ccr.corp.intel.com \
--to=wenjiex.a.li@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).