From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Peng, Yuan" <yuan.peng@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Peng, Yuan" <yuan.peng@intel.com>, "Pei, Yulong" <yulong.pei@intel.com>
Subject: Re: [dts] [PATCH v2]test_plans: add qos_api_test_plan.rst
Date: Thu, 31 Jan 2019 03:22:36 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BA1F465@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1548904181-45911-1-git-send-email-yuan.peng@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Peng Yuan
> Sent: Thursday, January 31, 2019 11:10 AM
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>; Pei, Yulong <yulong.pei@intel.com>
> Subject: [dts] [PATCH v2]test_plans: add qos_api_test_plan.rst
>
> Add qos_api_test_plan.rst to test_plans
>
> Signed-off-by: Pei Yulong <yulong.pei@intel.com>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
>
> diff --git a/test_plans/qos_api_test_plan.rst b/test_plans/qos_api_test_plan.rst
> new file mode 100644
> index 0000000..f89fdb3
> --- /dev/null
> +++ b/test_plans/qos_api_test_plan.rst
> @@ -0,0 +1,435 @@
> +.. Copyright (c) <2011-2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=======
> +QoS API
> +=======
> +
> +Description
> +===========
> +The generic API for the Quality of Service (QoS) Traffic Management of
> +Ethernet devices, which includes the following main features:
> +hierarchical scheduling, traffic shaping, congestion management, packet
> marking.
> +The TM setting commands are as following:
> +1. Add the port traffic management private shaper profile::
> +
> + testpmd> add port tm node shaper profile (port_id) (shaper_profile_id) \
> + (cmit_tb_rate) (cmit_tb_size) (peak_tb_rate) (peak_tb_size) \
> + (packet_length_adjust)
> +
> +2. Add nonleaf node to port traffic management hiearchy::
> +
> + testpmd> add port tm nonleaf node (port_id) (node_id) (parent_node_id) \
> + (priority) (weight) (level_id) (shaper_profile_id) \
> + (n_sp_priorities) (stats_mask) (n_shared_shapers) \
> + [(shared_shaper_0) (shared_shaper_1) ...] \
> +
> +3. Add leaf node to port traffic management hiearchy::
> +
> + testpmd> add port tm leaf node (port_id) (node_id) (parent_node_id) \
> + (priority) (weight) (level_id) (shaper_profile_id) \
> + (cman_mode) (wred_profile_id) (stats_mask) (n_shared_shapers) \
> + [(shared_shaper_id) (shared_shaper_id) ...] \
> +
> +4. Commit the traffic management hierarchy on the port::
> +
> + testpmd> port tm hierarchy commit (port_id) (clean_on_fail)
> +
> +Prerequisites
> +=============
> +For i40e, need enable rss
> +For ixgbe, need disable rss.
> +The DUT must have two 10G Ethernet ports connected to two ports on tester::
> +
> + dut_port_0 <---> tester_port_0
> + dut_port_1 <---> tester_port_1
> +
> +Assume two DUT 10G Ethernet ports' pci device id is as the following::
> +
> + dut_port_0 : "0000:05:00.0"
> + dut_port_1 : "0000:05:00.1"
> +
> +Bind two ports to dpdk driver::
> +
> + ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1
> +
> +Test Cases for I40e：
> +====================
> +
> +Test Case: dcb 4 tc queue mapping
> +=================================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-27 -n 4 --master-lcore=23 --
> -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 4 pfc off
> + testpmd> port config 1 dcb vt off 4 pfc off
> + testpmd> port start all
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. Send packets with set vlan user priority 0, 1, 2, 3, verify::
> +
> + pkt1 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=0)/IP()/Raw('x'*20)
> + pkt2 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=1)/IP()/Raw('x'*20)
> + pkt3 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=2)/IP()/Raw('x'*20)
> + pkt4 = Ether(dst="00:00:00:00:01:00",
> + src="00:02:00:00:00:01")/Dot1Q(prio=3)/IP()/Raw('x'*20)
> +
> + packet with vlan user priority 0 should be received by queue 0
> + packet with vlan user priority 1 should be received by queue 1
> + packet with vlan user priority 2 should be received by queue 2
> + packet with vlan user priority 3 should be received by queue 3
> +
> +Test Case: dcb 8 tc queue mapping
> +=================================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-31 -n 4 --master-lcore=23 --
> -i --nb-cores=8 --rxq=8 --txq=8 --rss-ip
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 8 pfc off
> + testpmd> port config 1 dcb vt off 8 pfc off
> + testpmd> port start all
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. Send packet with set vlan user priority 0, 1, 2, 3, 4, 5, 6, 7, verify::
> +
> + pkt1 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=0)/IP()/Raw('x'*20)
> + pkt2 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=1)/IP()/Raw('x'*20)
> + pkt3 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=2)/IP()/Raw('x'*20)
> + pkt4 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=3)/IP()/Raw('x'*20)
> + pkt5 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=4)/IP()/Raw('x'*20)
> + pkt6 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=5)/IP()/Raw('x'*20)
> + pkt7 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=6)/IP()/Raw('x'*20)
> + pkt8 = Ether(dst="00:00:00:00:01:00",
> + src="00:02:00:00:00:01")/Dot1Q(prio=7)/IP()/Raw('x'*20)
> +
> + packet with vlan user priority 0 should be received by queue 0
> + packet with vlan user priority 1 should be received by queue 1
> + packet with vlan user priority 2 should be received by queue 2
> + packet with vlan user priority 3 should be received by queue 3
> + packet with vlan user priority 4 should be received by queue 4
> + packet with vlan user priority 5 should be received by queue 5
> + packet with vlan user priority 6 should be received by queue 6
> + packet with vlan user priority 7 should be received by queue 7
> +
> +Test Case: shaping 1 port 4 tc
> +==============================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-27 -n 4 --master-lcore=23 --
> -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 4 pfc off
> + testpmd> port config 1 dcb vt off 4 pfc off
> +
> +2. Add root non leaf node::
> +
> + testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
> +
> +3. Add private shaper 1, 2, 3, 4 for tc node 0-4::
> +
> + testpmd> add port tm node shaper profile 1 1 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 2 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 3 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 4 0 0 25000000 0 0
> +
> +4. Add tc node::
> +
> + testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 1 1 0 0
> + testpmd> add port tm nonleaf node 1 900001 1000000 0 1 1 2 1 0 0
> + testpmd> add port tm nonleaf node 1 900002 1000000 0 1 1 3 1 0 0
> + testpmd> add port tm nonleaf node 1 900003 1000000 0 1 1 4 1 0 0
> +
> +5. Add queue leaf node::
> +
> + testpmd> add port tm leaf node 1 0 900000 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 1 900001 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 2 900002 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 3 900003 0 1 2 -1 0 0xffffffff 0 0
> +
> +6. Commit the traffic management hierarchy on the port::
> +
> + testpmd> port tm hierarchy commit 1 no
> + testpmd> port start all
> + testpmd> start
> +
> +7. Send four flows with user priority 0, 1, 2, 3,
> + verify shaping each flow to 200Mbps(25MBps).
> +
> +Test Case: shaping 1 port 8 tc
> +===============================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-31 -n 4 --master-lcore=23 --
> -i --nb-cores=8 --rxq=8 --txq=8 --rss-ip
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 8 pfc off
> + testpmd> port config 1 dcb vt off 8 pfc off
> +
> +2. Add root non leaf node::
> +
> + testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
> +
> +3. Add private shaper 1, 2, 3, 4, 5, 6, 7, 8, for tc node 0-7::
> +
> + testpmd> add port tm node shaper profile 1 1 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 2 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 3 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 4 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 5 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 6 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 7 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 8 0 0 25000000 0 0
> +
> +4. Add tc node::
> +
> + testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 1 1 0 0
> + testpmd> add port tm nonleaf node 1 900001 1000000 0 1 1 2 1 0 0
> + testpmd> add port tm nonleaf node 1 900002 1000000 0 1 1 3 1 0 0
> + testpmd> add port tm nonleaf node 1 900003 1000000 0 1 1 4 1 0 0
> + testpmd> add port tm nonleaf node 1 900004 1000000 0 1 1 5 1 0 0
> + testpmd> add port tm nonleaf node 1 900005 1000000 0 1 1 6 1 0 0
> + testpmd> add port tm nonleaf node 1 900006 1000000 0 1 1 7 1 0 0
> + testpmd> add port tm nonleaf node 1 900007 1000000 0 1 1 8 1 0 0
> +
> +5. Add queue leaf node::
> +
> + testpmd> add port tm leaf node 1 0 900000 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 1 900001 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 2 900002 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 3 900003 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 4 900004 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 5 900005 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 6 900006 0 1 2 -1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 7 900007 0 1 2 -1 0 0xffffffff 0 0
> +
> +6. Commit the traffic management hierarchy on the port::
> +
> + testpmd> port tm hierarchy commit 1 no
> + testpmd> port start all
> + testpmd> start
> +
> +7. Send four flows with user priority 0, 1, 2, 3, 4, 5, 6, 7,
> + verify shaping each flow to 200Mbps(25MBps).
> +
> +Test Case: shaping for port
> +===========================
> +1. Start testpmd::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-27 -n 4 --master-lcore=23 --
> -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
> + testpmd> port stop 1
> +
> +1. Add private shaper 0::
> +
> + testpmd> add port tm node shaper profile 1 0 0 0 25000000 0 0
> +
> +2. Add port (root nonleaf) node::
> +
> + testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 0 1 0 0
> +
> +3. Commit the traffic management hierarchy on the port::
> +
> + testpmd> port tm hierarchy commit 1 no
> + testpmd> port start 1
> + testpmd> start
> +
> +4. Start transmitting,
> + verify shaping the traffic to 200Mbps(25MBps).
> +
> +Test Cases for ixgbe:
> +====================
> +
> +Test Case: dcb 4 tc queue mapping
> +=================================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-7 -n 4 --master-lcore=3 -- -i --
> nb-cores=4 --rxq=4 --txq=4 --disable-rss
> + testpmd> vlan set filter off 0
> + testpmd> vlan set filter off 1
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 4 pfc off
> + testpmd> port config 1 dcb vt off 4 pfc off
> + testpmd> port start all
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. Send packets with set vlan user priority 0, 1, 2, 3, verify::
> +
> + pkt1 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=0)/IP()/Raw('x'*20)
> + pkt2 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=1)/IP()/Raw('x'*20)
> + pkt3 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=2)/IP()/Raw('x'*20)
> + pkt4 = Ether(dst="00:00:00:00:01:00",
> + src="00:02:00:00:00:01")/Dot1Q(prio=3)/IP()/Raw('x'*20)
> +
> + packet with vlan user priority 0 should be received by queue 0
> + packet with vlan user priority 1 should be received by queue 32
> + packet with vlan user priority 2 should be received by queue 64
> + packet with vlan user priority 3 should be received by queue 96
> +
> +Test Case: dcb 8 tc queue mapping
> +=================================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-11 -n 4 --master-lcore=3 -- -i
> --nb-cores=8 --rxq=8 --txq=8 --disable-rss
> + testpmd> vlan set filter off 0
> + testpmd> vlan set filter off 1
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 8 pfc off
> + testpmd> port config 1 dcb vt off 8 pfc off
> + testpmd> port start all
> + testpmd> set fwd rxonly
> + testpmd> set verbose 1
> + testpmd> start
> +
> +2. Send packet with set vlan user priority 0, 1, 2, 3, 4, 5, 6, 7, verify::
> +
> + pkt1 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=0)/IP()/Raw('x'*20)
> + pkt2 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=1)/IP()/Raw('x'*20)
> + pkt3 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=2)/IP()/Raw('x'*20)
> + pkt4 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=3)/IP()/Raw('x'*20)
> + pkt5 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=4)/IP()/Raw('x'*20)
> + pkt6 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=5)/IP()/Raw('x'*20)
> + pkt7 = Ether(dst="00:00:00:00:01:00",
> src="00:02:00:00:00:01")/Dot1Q(prio=6)/IP()/Raw('x'*20)
> + pkt8 = Ether(dst="00:00:00:00:01:00",
> + src="00:02:00:00:00:01")/Dot1Q(prio=7)/IP()/Raw('x'*20)
> +
> + packet with vlan user priority 0 should be received by queue 0
> + packet with vlan user priority 1 should be received by queue 16
> + packet with vlan user priority 2 should be received by queue 32
> + packet with vlan user priority 3 should be received by queue 48
> + packet with vlan user priority 4 should be received by queue 64
> + packet with vlan user priority 5 should be received by queue 80
> + packet with vlan user priority 6 should be received by queue 96
> + packet with vlan user priority 7 should be received by queue 112
> +
> +Test Case: shaping for queue with 4 tc
> +======================================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-7 -n 4 --master-lcore=3 -- -i --
> nb-cores=4 --rxq=4 --txq=4 --disable-rss
> + testpmd> vlan set filter off 0
> + testpmd> vlan set filter off 1
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 4 pfc off
> + testpmd> port config 1 dcb vt off 4 pfc off
> + testpmd> port start all
> +
> +2. Add root non leaf node::
> +
> + testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
> +
> +3. Add tc node::
> +
> + testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900001 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900002 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900003 1000000 0 1 1 -1 1 0 0
> +
> +4. Add private shaper 1, 2, 3, 4 for tc node 0-4::
> +
> + testpmd> add port tm node shaper profile 1 0 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 1 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 2 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 3 0 0 25000000 0 0
> +
> +5. Add queue leaf node::
> +
> + testpmd> add port tm leaf node 1 0 900000 0 1 2 0 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 1 900001 0 1 2 1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 2 900002 0 1 2 2 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 3 900003 0 1 2 3 0 0xffffffff 0 0
> +
> +6. Commit the traffic management hierarchy on the port::
> +
> + testpmd> port tm hierarchy commit 1 no
> + testpmd> port start all
> + testpmd> start
> +
> +7. Send four flows with user priority 0, 1, 2, 3,
> + verify shaping each flow to 200Mbps(25MBps).
> +
> +Test Case: shaping for queue with 8 tc
> +======================================
> +1. Start testpmd and set DCB::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-11 -n 4 --master-lcore=3 -- -i
> --nb-cores=8 --rxq=8 --txq=8 --disable-rss
> + testpmd> vlan set filter off 0
> + testpmd> vlan set filter off 1
> + testpmd> port stop all
> + testpmd> port config 0 dcb vt off 8 pfc off
> + testpmd> port config 1 dcb vt off 8 pfc off
> + testpmd> port start all
> +
> +2. Add root non leaf node::
> +
> + testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
> +
> +3. Add tc node::
> +
> + testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900001 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900002 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900003 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900004 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900005 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900006 1000000 0 1 1 -1 1 0 0
> + testpmd> add port tm nonleaf node 1 900007 1000000 0 1 1 -1 1 0 0
> +
> +4. Add private shaper 1, 2, 3, 4, 5, 6, 7, 8, for tc node 0-7::
> +
> + testpmd> add port tm node shaper profile 1 0 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 1 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 2 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 3 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 4 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 5 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 6 0 0 25000000 0 0
> + testpmd> add port tm node shaper profile 1 7 0 0 25000000 0 0
> +
> +5. Add queue leaf node::
> +
> + testpmd> add port tm leaf node 1 0 900000 0 1 2 0 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 1 900001 0 1 2 1 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 2 900002 0 1 2 2 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 3 900003 0 1 2 3 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 4 900004 0 1 2 4 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 5 900005 0 1 2 5 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 6 900006 0 1 2 6 0 0xffffffff 0 0
> + testpmd> add port tm leaf node 1 7 900007 0 1 2 7 0 0xffffffff 0 0
> +
> +6. Commit the traffic management hierarchy on the port::
> +
> + testpmd> port tm hierarchy commit 1 no
> + testpmd> port start all
> + testpmd> start
> +
> +7. Send four flows with user priority 0, 1, 2, 3, 4, 5, 6, 7, 8,
> + verify shaping each flow to 200Mbps(25MBps).
> --
> 2.5.0
prev parent reply other threads:[~2019-01-31 3:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Message-ID to be used as In-Reply-To for the first email (if any)?>
2019-01-31 3:09 ` Peng Yuan
2019-01-31 3:22 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BA1F465@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yuan.peng@intel.com \
--cc=yulong.pei@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).