* [dts] [PATCH V2] test_plans/etag: add hardware informations @ 2019-03-22 6:31 Jianwei Mei 2019-03-22 6:30 ` Zhu, ShuaiX 2019-03-24 7:40 ` Tu, Lijuan 0 siblings, 2 replies; 4+ messages in thread From: Jianwei Mei @ 2019-03-22 6:31 UTC (permalink / raw) To: dts; +Cc: Jianwei Mei modify x550 to X552/X557 and add hardware infos Signed-off-by: Jianwei Mei <jianweix.mei@intel.com> --- test_plans/etag_test_plan.rst | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/test_plans/etag_test_plan.rst b/test_plans/etag_test_plan.rst index 6350d64..f643a12 100644 --- a/test_plans/etag_test_plan.rst +++ b/test_plans/etag_test_plan.rst @@ -35,12 +35,12 @@ External Tag (E-tag) Tests ========================== In some systems an additional external tag (E-tag) can be present before the -VLAN. NIC X550 support VLANs in presence of external tags. +VLAN. NIC X552/X557 support VLANs in presence of external tags. E-tag mode is used for systems where the device adds a tag to identify a subsystem (usually a VM) and the near end switch adds a tag indicating the destination subsystem. -The support of E-tag features by X550 consists in: +The support of E-tag features by X552/X557 consists in: - The filtering of received E-tag packets - E-tag header stripping by VF device in received packets - E-tag header insertion by VF device in transmitted packets @@ -49,19 +49,38 @@ The support of E-tag features by X550 consists in: Prerequisites ============= +1. Hardware: + +- Machine type: SuperMicro 1U Xeon D Broadwell SoC uServer +- Product Name: SYS-5018D-FN4T +- Nic: Sagepond(X552/X557-AT) + +Note: you can use "dmidecode | grep 'Product Name'" command to get the product name. + +2. Bios: + +- Enable etag items in BIOS + +3. Software: + +- DPDK: http://dpdk.org/git/dpdk + +Set up scenario +=============== + 1. Create 2VF devices from PF device:: ./dpdk_nic_bind.py --st 0000:84:00.0 'Device 1563' drv=igb_uio unused= echo 2 > /sys/bus/pci/devices/0000\:84\:00.0/max_vfs -2. Detach VFs from the host, bind them to pci-stub driver:: +2. Detach VFs from the host, bind them to pci-stub or vfio-pci driver:: /sbin/modprobe pci-stub - using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 1565":: + using `lspci -nn|grep -i ethernet` got VF device id, for example "8086:15ad":: - echo "8086 1565" > /sys/bus/pci/drivers/pci-stub/new_id + echo "8086:15ad" > /sys/bus/pci/drivers/pci-stub/new_id echo 0000:84:10.0 > /sys/bus/pci/devices/0000:84:10.0/driver/unbind echo 0000:84:10.0 > /sys/bus/pci/drivers/pci-stub/bind echo 0000:84:10.2 > /sys/bus/pci/devices/0000:84:10.2/driver/unbind -- 2.17.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V2] test_plans/etag: add hardware informations 2019-03-22 6:31 [dts] [PATCH V2] test_plans/etag: add hardware informations Jianwei Mei @ 2019-03-22 6:30 ` Zhu, ShuaiX 2019-03-24 7:40 ` Tu, Lijuan 1 sibling, 0 replies; 4+ messages in thread From: Zhu, ShuaiX @ 2019-03-22 6:30 UTC (permalink / raw) To: Mei, JianweiX, dts; +Cc: Mei, JianweiX, Zhu, ShuaiX Tested-by: Zhu, ShuaiX <shuaix.zhu@intel.com> > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Jianwei Mei > Sent: Friday, March 22, 2019 2:31 PM > To: dts@dpdk.org > Cc: Mei, JianweiX <jianweix.mei@intel.com> > Subject: [dts] [PATCH V2] test_plans/etag: add hardware informations > > > modify x550 to X552/X557 and add hardware infos > > Signed-off-by: Jianwei Mei <jianweix.mei@intel.com> > --- > test_plans/etag_test_plan.rst | 29 ++++++++++++++++++++++++----- > 1 file changed, 24 insertions(+), 5 deletions(-) > > diff --git a/test_plans/etag_test_plan.rst b/test_plans/etag_test_plan.rst > index 6350d64..f643a12 100644 > --- a/test_plans/etag_test_plan.rst > +++ b/test_plans/etag_test_plan.rst > @@ -35,12 +35,12 @@ External Tag (E-tag) Tests > ========================== > > In some systems an additional external tag (E-tag) can be present before the > -VLAN. NIC X550 support VLANs in presence of external tags. > +VLAN. NIC X552/X557 support VLANs in presence of external tags. > E-tag mode is used for systems where the device adds a tag to identify a > subsystem (usually a VM) and the near end switch adds a tag indicating the > destination subsystem. > > -The support of E-tag features by X550 consists in: > +The support of E-tag features by X552/X557 consists in: > - The filtering of received E-tag packets > - E-tag header stripping by VF device in received packets > - E-tag header insertion by VF device in transmitted packets @@ -49,19 > +49,38 @@ The support of E-tag features by X550 consists in: > Prerequisites > ============= > > +1. Hardware: > + > +- Machine type: SuperMicro 1U Xeon D Broadwell SoC uServer > +- Product Name: SYS-5018D-FN4T > +- Nic: Sagepond(X552/X557-AT) > + > +Note: you can use "dmidecode | grep 'Product Name'" command to get the > product name. > + > +2. Bios: > + > +- Enable etag items in BIOS > + > +3. Software: > + > +- DPDK: http://dpdk.org/git/dpdk > + > +Set up scenario > +=============== > + > 1. Create 2VF devices from PF device:: > > ./dpdk_nic_bind.py --st > 0000:84:00.0 'Device 1563' drv=igb_uio unused= > echo 2 > /sys/bus/pci/devices/0000\:84\:00.0/max_vfs > > -2. Detach VFs from the host, bind them to pci-stub driver:: > +2. Detach VFs from the host, bind them to pci-stub or vfio-pci driver:: > > /sbin/modprobe pci-stub > > - using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 > 1565":: > + using `lspci -nn|grep -i ethernet` got VF device id, for example > "8086:15ad":: > > - echo "8086 1565" > /sys/bus/pci/drivers/pci-stub/new_id > + echo "8086:15ad" > /sys/bus/pci/drivers/pci-stub/new_id > echo 0000:84:10.0 > > /sys/bus/pci/devices/0000:84:10.0/driver/unbind > echo 0000:84:10.0 > /sys/bus/pci/drivers/pci-stub/bind > echo 0000:84:10.2 > > /sys/bus/pci/devices/0000:84:10.2/driver/unbind > -- > 2.17.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V2] test_plans/etag: add hardware informations 2019-03-22 6:31 [dts] [PATCH V2] test_plans/etag: add hardware informations Jianwei Mei 2019-03-22 6:30 ` Zhu, ShuaiX @ 2019-03-24 7:40 ` Tu, Lijuan 2019-03-25 7:23 ` Mei, JianweiX 1 sibling, 1 reply; 4+ messages in thread From: Tu, Lijuan @ 2019-03-24 7:40 UTC (permalink / raw) To: Mei, JianweiX, dts; +Cc: Mei, JianweiX Hi Jianwei, Change X550 to X552/x557 will confuse user that X550 not support E-tag, but actually it supports. > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Jianwei Mei > Sent: Thursday, March 21, 2019 11:31 PM > To: dts@dpdk.org > Cc: Mei, JianweiX <jianweix.mei@intel.com> > Subject: [dts] [PATCH V2] test_plans/etag: add hardware informations > > > modify x550 to X552/X557 and add hardware infos > > Signed-off-by: Jianwei Mei <jianweix.mei@intel.com> > --- > test_plans/etag_test_plan.rst | 29 ++++++++++++++++++++++++----- > 1 file changed, 24 insertions(+), 5 deletions(-) > > diff --git a/test_plans/etag_test_plan.rst b/test_plans/etag_test_plan.rst index > 6350d64..f643a12 100644 > --- a/test_plans/etag_test_plan.rst > +++ b/test_plans/etag_test_plan.rst > @@ -35,12 +35,12 @@ External Tag (E-tag) Tests > ========================== > > In some systems an additional external tag (E-tag) can be present before the - > VLAN. NIC X550 support VLANs in presence of external tags. > +VLAN. NIC X552/X557 support VLANs in presence of external tags. > E-tag mode is used for systems where the device adds a tag to identify a > subsystem (usually a VM) and the near end switch adds a tag indicating the > destination subsystem. > > -The support of E-tag features by X550 consists in: > +The support of E-tag features by X552/X557 consists in: > - The filtering of received E-tag packets > - E-tag header stripping by VF device in received packets > - E-tag header insertion by VF device in transmitted packets @@ -49,19 +49,38 > @@ The support of E-tag features by X550 consists in: > Prerequisites > ============= > > +1. Hardware: > + > +- Machine type: SuperMicro 1U Xeon D Broadwell SoC uServer > +- Product Name: SYS-5018D-FN4T > +- Nic: Sagepond(X552/X557-AT) > + > +Note: you can use "dmidecode | grep 'Product Name'" command to get the > product name. > + > +2. Bios: > + > +- Enable etag items in BIOS > + > +3. Software: > + > +- DPDK: http://dpdk.org/git/dpdk > + > +Set up scenario > +=============== > + > 1. Create 2VF devices from PF device:: > > ./dpdk_nic_bind.py --st > 0000:84:00.0 'Device 1563' drv=igb_uio unused= > echo 2 > /sys/bus/pci/devices/0000\:84\:00.0/max_vfs > > -2. Detach VFs from the host, bind them to pci-stub driver:: > +2. Detach VFs from the host, bind them to pci-stub or vfio-pci driver:: > > /sbin/modprobe pci-stub > > - using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 1565":: > + using `lspci -nn|grep -i ethernet` got VF device id, for example "8086:15ad":: > > - echo "8086 1565" > /sys/bus/pci/drivers/pci-stub/new_id > + echo "8086:15ad" > /sys/bus/pci/drivers/pci-stub/new_id > echo 0000:84:10.0 > /sys/bus/pci/devices/0000:84:10.0/driver/unbind > echo 0000:84:10.0 > /sys/bus/pci/drivers/pci-stub/bind > echo 0000:84:10.2 > /sys/bus/pci/devices/0000:84:10.2/driver/unbind > -- > 2.17.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V2] test_plans/etag: add hardware informations 2019-03-24 7:40 ` Tu, Lijuan @ 2019-03-25 7:23 ` Mei, JianweiX 0 siblings, 0 replies; 4+ messages in thread From: Mei, JianweiX @ 2019-03-25 7:23 UTC (permalink / raw) To: Tu, Lijuan, dts Hi Lijuan, You are right, the NIC X550 support E-tag too, I'll update the test plan, thanks for checking this. -----Original Message----- From: Tu, Lijuan Sent: Sunday, March 24, 2019 3:40 PM To: Mei, JianweiX <jianweix.mei@intel.com>; dts@dpdk.org Cc: Mei, JianweiX <jianweix.mei@intel.com> Subject: RE: [dts] [PATCH V2] test_plans/etag: add hardware informations Hi Jianwei, Change X550 to X552/x557 will confuse user that X550 not support E-tag, but actually it supports. > -----Original Message----- > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Jianwei Mei > Sent: Thursday, March 21, 2019 11:31 PM > To: dts@dpdk.org > Cc: Mei, JianweiX <jianweix.mei@intel.com> > Subject: [dts] [PATCH V2] test_plans/etag: add hardware informations > > > modify x550 to X552/X557 and add hardware infos > > Signed-off-by: Jianwei Mei <jianweix.mei@intel.com> > --- > test_plans/etag_test_plan.rst | 29 ++++++++++++++++++++++++----- > 1 file changed, 24 insertions(+), 5 deletions(-) > > diff --git a/test_plans/etag_test_plan.rst > b/test_plans/etag_test_plan.rst index > 6350d64..f643a12 100644 > --- a/test_plans/etag_test_plan.rst > +++ b/test_plans/etag_test_plan.rst > @@ -35,12 +35,12 @@ External Tag (E-tag) Tests > ========================== > > In some systems an additional external tag (E-tag) can be present > before the - VLAN. NIC X550 support VLANs in presence of external tags. > +VLAN. NIC X552/X557 support VLANs in presence of external tags. > E-tag mode is used for systems where the device adds a tag to > identify a subsystem (usually a VM) and the near end switch adds a tag > indicating the destination subsystem. > > -The support of E-tag features by X550 consists in: > +The support of E-tag features by X552/X557 consists in: > - The filtering of received E-tag packets > - E-tag header stripping by VF device in received packets > - E-tag header insertion by VF device in transmitted packets @@ > -49,19 +49,38 @@ The support of E-tag features by X550 consists in: > Prerequisites > ============= > > +1. Hardware: > + > +- Machine type: SuperMicro 1U Xeon D Broadwell SoC uServer > +- Product Name: SYS-5018D-FN4T > +- Nic: Sagepond(X552/X557-AT) > + > +Note: you can use "dmidecode | grep 'Product Name'" command to get > +the > product name. > + > +2. Bios: > + > +- Enable etag items in BIOS > + > +3. Software: > + > +- DPDK: http://dpdk.org/git/dpdk > + > +Set up scenario > +=============== > + > 1. Create 2VF devices from PF device:: > > ./dpdk_nic_bind.py --st > 0000:84:00.0 'Device 1563' drv=igb_uio unused= > echo 2 > /sys/bus/pci/devices/0000\:84\:00.0/max_vfs > > -2. Detach VFs from the host, bind them to pci-stub driver:: > +2. Detach VFs from the host, bind them to pci-stub or vfio-pci driver:: > > /sbin/modprobe pci-stub > > - using `lspci -nn|grep -i ethernet` got VF device id, for example "8086 1565":: > + using `lspci -nn|grep -i ethernet` got VF device id, for example "8086:15ad":: > > - echo "8086 1565" > /sys/bus/pci/drivers/pci-stub/new_id > + echo "8086:15ad" > /sys/bus/pci/drivers/pci-stub/new_id > echo 0000:84:10.0 > /sys/bus/pci/devices/0000:84:10.0/driver/unbind > echo 0000:84:10.0 > /sys/bus/pci/drivers/pci-stub/bind > echo 0000:84:10.2 > > /sys/bus/pci/devices/0000:84:10.2/driver/unbind > -- > 2.17.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-25 7:23 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-03-22 6:31 [dts] [PATCH V2] test_plans/etag: add hardware informations Jianwei Mei 2019-03-22 6:30 ` Zhu, ShuaiX 2019-03-24 7:40 ` Tu, Lijuan 2019-03-25 7:23 ` Mei, JianweiX
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).