* [dts] [PATCH v3] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test case
@ 2019-04-14 20:37 Yinan
2019-04-15 20:47 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-04-14 20:37 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
add virtio1.1 inorder path test in pvp_multi_paths_vhost_single_core_performance_test_plan.rst
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...host_single_core_performance_test_plan.rst | 88 ++++++++++---------
1 file changed, 47 insertions(+), 41 deletions(-)
diff --git a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
index 247f162..9a8f8e3 100644
--- a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
@@ -30,23 +30,26 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
-=======================================
-PVP multi-paths vhost single core Tests
-=======================================
+
+========================================================
+vhost/virtio pvp multi-paths vhost single core test plan
+========================================================
Description
===========
-Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
-Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
-no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
-For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io fwd at virtio side to lower the virtio workload.
+Benchmark PVP vhost single core performance with 8 tx/rx paths.
+Includes mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
+Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower the virtio workload.
-Test Case 1: vhost single core performance test with Virtio 1.1 mergeable path
-==============================================================================
+Test flow
+=========
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: vhost single core performance test with virtio 1.1 mergeable path
+==============================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -59,18 +62,15 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
2. Launch virtio-user by below command::
./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1 \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
>start
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 2: vhost single core performance test with Virtio 1.1 no-mergeable path
-=================================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 2: vhost single core performance test with virtio 1.1 normal path
+===========================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -83,19 +83,16 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
2. Launch virtio-user by below command::
./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0 \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
>start
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 3: vhost single core performance test with Inorder mergeable path
+Test Case 3: vhost single core performance test with inorder mergeable path
===========================================================================
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -114,12 +111,9 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 4: vhost single core performance test with Inorder no-mergeable path
+Test Case 4: vhost single core performance test with inorder no-mergeable path
==============================================================================
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -138,11 +132,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 5: vhost single core performance test with Mergeable path
-=======================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 5: vhost single core performance test with mergeable path
+===================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -162,11 +153,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 6: vhost single core performance test with Normal path
-=======================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 6: vhost single core performance test with normal path
+================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -186,11 +174,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 7: vhost single core performance test with Vector_RX path
-=======================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 7: vhost single core performance test with vector_rx path
+===================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -209,3 +194,24 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>start
3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 8: vhost single core performance test with virtio 1.1 inorder path
+============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v3] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test case
2019-04-14 20:37 [dts] [PATCH v3] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test case Yinan
@ 2019-04-15 20:47 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-04-15 20:47 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Sunday, April 14, 2019 1:38 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v3]
> test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1
> inorder path test case
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> add virtio1.1 inorder path test in
> pvp_multi_paths_vhost_single_core_performance_test_plan.rst
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...host_single_core_performance_test_plan.rst | 88 ++++++++++---------
> 1 file changed, 47 insertions(+), 41 deletions(-)
>
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> index 247f162..9a8f8e3 100644
> ---
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> +++
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan
> +++ .rst
> @@ -30,23 +30,26 @@
> ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> OF THE POSSIBILITY OF SUCH DAMAGE.
>
> -=======================================
> -PVP multi-paths vhost single core Tests -
> =======================================
> +
> +========================================================
> +vhost/virtio pvp multi-paths vhost single core test plan
> +========================================================
>
> Description
> ===========
>
> -Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder -no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> -For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io
> fwd at virtio side to lower the virtio workload.
> +Benchmark PVP vhost single core performance with 8 tx/rx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> +Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower
> the virtio workload.
>
> -Test Case 1: vhost single core performance test with Virtio 1.1 mergeable
> path -
> ================================================================
> ==============
> +Test flow
> +=========
>
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +Test Case 1: vhost single core performance test with virtio 1.1
> +mergeable path
> +===============================================================
> ========
> +=======
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -59,18 +62,15 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 2. Launch virtio-user by below command::
>
> ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> - --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1 \
> +
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,pa
> + cked_vq=1,mrg_rxbuf=1,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> >start
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 2: vhost single core performance test with Virtio 1.1 no-mergeable
> path -
> ================================================================
> =================
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 2: vhost single core performance test with virtio 1.1 normal
> +path
> +===============================================================
> ========
> +====
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -83,19 +83,16 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> 2. Launch virtio-user by below command::
>
> ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> - --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0 \
> +
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,pa
> + cked_vq=1,mrg_rxbuf=0,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> >start
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 3: vhost single core performance test with Inorder mergeable path
> +Test Case 3: vhost single core performance test with inorder mergeable
> +path
>
> ================================================================
> ===========
>
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> -
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> @@ -114,12 +111,9 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 4: vhost single core performance test with Inorder no-mergeable
> path
> +Test Case 4: vhost single core performance test with inorder
> +no-mergeable path
>
> ================================================================
> ==============
>
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> -
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> @@ -138,11 +132,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 5: vhost single core performance test with Mergeable path -
> ================================================================
> =======
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 5: vhost single core performance test with mergeable path
> +===============================================================
> ====
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -162,11 +153,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 6: vhost single core performance test with Normal path -
> ================================================================
> =======
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 6: vhost single core performance test with normal path
> +===============================================================
> =
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -186,11 +174,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 7: vhost single core performance test with Vector_RX path -
> ================================================================
> =======
> -
> -flow:
> -TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +Test Case 7: vhost single core performance test with vector_rx path
> +===============================================================
> ====
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -209,3 +194,24 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> >start
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 8: vhost single core performance test with virtio 1.1 inorder
> +path
> +===============================================================
> ========
> +=====
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-15 20:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-14 20:37 [dts] [PATCH v3] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test case Yinan
2019-04-15 20:47 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).