From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans/pvp_multi_paths_performance: add virtio1.1 inorder path test
Date: Mon, 15 Apr 2019 21:28:12 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BA625CB@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20190404011625.34112-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, April 3, 2019 6:16 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans/pvp_multi_paths_performance: add
> virtio1.1 inorder path test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../pvp_multi_paths_performance_test_plan.rst | 142 +++++++++++-------
> 1 file changed, 86 insertions(+), 56 deletions(-)
>
> diff --git a/test_plans/pvp_multi_paths_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_performance_test_plan.rst
> index 524adf2..6eac68b 100644
> --- a/test_plans/pvp_multi_paths_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_performance_test_plan.rst
> @@ -30,29 +30,32 @@
> ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> OF THE POSSIBILITY OF SUCH DAMAGE.
>
> -=====================================
> -PVP multi-paths performance Tests
> -=====================================
> +==================================================
> +vhost/virtio pvp multi-paths performance test plan
> +==================================================
>
> Description
> ===========
>
> -Benchmark PVP multi-paths performance with 7 TX/RX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder -no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +Benchmark pvp multi-paths performance with 8 tx/rx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> Give 1 core for vhost and virtio respectively.
>
> -Test Case 1: pvp test with Virtio 1.1 mergeable path -
> ================================================================
> =======
> +Test flow
> +=========
>
> -flow:
> TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
>
> +Test Case 1: pvp test with virtio 1.1 mergeable path
> +====================================================
> +
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -60,24 +63,24 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> -Test Case 2: pvp test with Virtio 1.1 no-mergeable path -
> ================================================================
> =======
> + testpmd>show port stats all
>
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 2: pvp test with virtio 1.1 normal path
> +=================================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -85,24 +88,24 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> -Test Case 3: pvp test with Inorder mergeable path -
> ================================================================
> =======
> + testpmd>show port stats all
>
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 3: pvp test with inorder mergeable path
> +=================================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -111,23 +114,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> -Test Case 4: pvp test with Inorder no-mergeable path -
> ================================================================
> =======
> + testpmd>show port stats all
>
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 4: pvp test with inorder no-mergeable path
> +====================================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -136,23 +139,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> -Test Case 5: pvp test with Mergeable path -
> ================================================================
> =======
> + testpmd>show port stats all
>
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 5: pvp test with mergeable path
> +=========================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -161,23 +164,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> -Test Case 6: pvp test with Normal path
> -
> ================================================================
> =======
> + testpmd>show port stats all
>
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 6: pvp test with normal path
> +======================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -186,23 +189,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
>
> -Test Case 7: pvp test with Vector_RX path -
> ================================================================
> =======
> + testpmd>show port stats all
>
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 7: pvp test with vector_rx path
> +=========================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> @@ -211,8 +214,35 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> + -- -i --tx-offloads=0x0 --nb-cores=1 --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> \ No newline at end of file
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 8: pvp test with virtio 1.1 inorder path
> +==================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> + testpmd>show port stats all
> --
> 2.17.1
prev parent reply other threads:[~2019-04-15 21:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-04 1:16 Yinan
2019-04-15 21:28 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BA625CB@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).