From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans/loopback_multi_queues: add test plan for loopback multi-queues test
Date: Tue, 23 Apr 2019 20:29:37 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BA658FB@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20190422011322.27699-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Sunday, April 21, 2019 6:13 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans/loopback_multi_queues: add test plan
> for loopback multi-queues test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../loopback_multi_queues_test_plan.rst | 306 ++++++++++++++++++
> 1 file changed, 306 insertions(+)
> create mode 100644 test_plans/loopback_multi_queues_test_plan.rst
>
> diff --git a/test_plans/loopback_multi_queues_test_plan.rst
> b/test_plans/loopback_multi_queues_test_plan.rst
> new file mode 100644
> index 0000000..68fb61f
> --- /dev/null
> +++ b/test_plans/loopback_multi_queues_test_plan.rst
> @@ -0,0 +1,306 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary forim must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================================
> +vhost/virtio-user loopback with multi-queue test plan
> +=====================================================
> +
> +Description
> +===========
> +
> +Benchmark vhost/virtio-user loopback multi-queues test with 8 rx/tx paths,
> virtio-user support 8 queues in maximum.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> +
> +Test Case 1: loopback 2 queues test with virtio 1.1 mergeable path
> +===============================================================
> ===
> +1. Launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
> + -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 2: loopback 2 queues test with virtio 1.1 normal path
> +===============================================================
> +
> +1. Launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
> + -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 3: loopback 2 queues test with virtio 1.1 inorder path
> +===============================================================
> =
> +
> +1. Launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
> + -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 4: loopback 2 queues test with inorder mergeable path
> +===============================================================
> +
> +1. Launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
> + -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 5: loopback 2 queues test with inorder no-mergeable path
> +===============================================================
> ===
> +
> +1. Launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --no-pci \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
> + -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --
> txq=2 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 6: loopback 8 queues test with mergeable path
> +=======================================================
> +
> +1. Launch testpmd by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-6 -n 4 --socket-mem 1024,1024 --no-pci \
> + --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
> + -i --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 7-11 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=4--rxq=8 --
> txq=8 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +
> +Test Case 7: loopback 8 queues test with normal path
> +====================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-6 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=8' -- \
> + -i --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
> + >set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 7-11 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=4 --rxq=8 --
> txq=8 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> +
> +Test Case 8: loopback 8 queues test with vector_rx path
> +=======================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-6 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=8' -- \
> + -i --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --rxd=1024
> + >set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 7-11 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=8,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --rss-ip --nb-cores=4 --rxq=8 --txq=8 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Check each queue's RX/TX packet numbers::
> +
> + testpmd>stop
> --
> 2.17.1
next prev parent reply other threads:[~2019-04-23 20:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-22 1:13 Yinan
2019-04-23 20:29 ` Tu, Lijuan [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-04-16 0:43 Yinan
2019-04-16 23:25 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BA658FB@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).