test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test plan
@ 2019-05-08  9:51 han yingya
  2019-05-08 10:45 ` Rami Rosen
  2019-05-13  9:00 ` Tu, Lijuan
  0 siblings, 2 replies; 3+ messages in thread
From: han yingya @ 2019-05-08  9:51 UTC (permalink / raw)
  To: dts; +Cc: han yingya

Signed-off-by: han yingya <yingyax.han@intel.com>
---
 test_plans/vf_l3fwd_test_plan.rst | 177 ++++++++++++++++++++++++++++++
 1 file changed, 177 insertions(+)
 create mode 100644 test_plans/vf_l3fwd_test_plan.rst

diff --git a/test_plans/vf_l3fwd_test_plan.rst b/test_plans/vf_l3fwd_test_plan.rst
new file mode 100644
index 0000000..f56a904
--- /dev/null
+++ b/test_plans/vf_l3fwd_test_plan.rst
@@ -0,0 +1,177 @@
+.. Copyright (c) <2019>, Intel Corporation
+      All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+==================================
+VF L3 Forwarding Performance Tests
+==================================
+
+This document provides benchmark test for NIC VFs which are created from
+kernel PFs or DPDK PFs. These tests use l3fwd as a simple forwarder
+between NIC vfs. The goal of this test plan is to have a tested benchmark
+between NIC vfs.
+
+
+Prerequisites
+==============
+
+* Hardware requirements:
+
+  * XL710, XXV710: 2 ports from 2 NICs, 1 port per NIC, 2 cores & 2 queues per VF.
+
+    ::
+
+      +------------------------------+
+      |  DUT           |  TESTER     |
+      +==============================+
+      | NIC-1,Port-1  ---  TG,Port-1 |
+      | NIC-2,Port-1  ---  TG,Port-2 |
+      +------------------------------+
+
+
+  * X710: 4 ports from 1 NIC, 1 core 1 queues per port.
+
+    ::
+
+      +------------------------------+
+      |  DUT           |  TESTER     |
+      +==============================+
+      | NIC-1,Port-1  ---  TG,Port-1 |
+      | NIC-1,Port-2  ---  TG,Port-2 |
+      | NIC-1,Port-3  ---  TG,Port-3 |
+      | NIC-1,Port-4  ---  TG,Port-4 |
+      +------------------------------+
+
+  * 825992: 2 ports from 2 NIC, 1 core 1 queues per port.
+
+    ::
+
+      + -----------------------------+
+      |  DUT           |  TESTER     |
+      +==============================+
+      | NIC-1,Port-1  ---  TG,Port-1 |
+      | NIC-2,Port-1  ---  TG,Port-2 |
+      +------------------------------+
+
+==============
+Setup overview
+==============
+
+Set up topology as above based on the NIC used.
+
+Test Case 1: Measure performance with kernel PF & dpdk VF
+========================================================
+
+1, Bind PF ports to kernel driver, i40e or ixgbe, then create 1 VF from each PF,
+take XL710 for example::
+
+  echo 1 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs
+  echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/sriov_numvfs
+
+2, Set vf mac address::
+
+  ip link set ens5f0 vf 0 mac 00:12:34:56:78:01
+  ip link set ens5f1 vf 0 mac 00:12:34:56:78:02
+
+3, Bind all the created VFs to dpdk driver, igb_uio or vfio-pci::
+
+  ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
+
+4, Start dpdk l3fwd with 1:1 matched cores and queues::
+
+  ./examples/l3fwd/build/l3fwd -c 0xf -n 4 -- -p 0x3 --config '(0,0,0),(1,0,1),(0,1,2),(1,1,3)'
+
+5, Send packet with frame size from 64bytes to 1518bytes with ixia traffic generator,
+make sure your traffic configuration meets LPM rules, and will go to all queues, all ports.
+Fill out this table with results.
+
++-------+------+--------+-----------+
+| Frame | mode | Mpps   | %linerate |
++=======+======+========+===========+
+| 64    | lpm  |        |           |
++-------+------+--------+-----------+
+| 128   | lpm  |        |           |
++-------+------+--------+-----------+
+| 256   | lpm  |        |           |
++-------+------+--------+-----------+
+| 512   | lpm  |        |           |
++-------+------+--------+-----------+
+| 1024  | lpm  |        |           |
++-------+------+--------+-----------+
+| 1518  | lpm  |        |           |
++-------+------+--------+-----------+
+
+
+Test Case 2: Measure performance with dpdk PF & dpdk VF
+======================================================
+
+1, Bind PF ports to igb_uio driver, then create 1 VF from each PF,
+take XL710 for example::
+
+  ./usertools/dpdk-devbind.py -b igb_uio 18:00.0 18:00.1
+  echo 1 > /sys/bus/pci/devices/0000\:18\:00.0/max_vfs
+  echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/max_vfs
+
+2, Bind the two created VFs to dpdk driver, igb_uio or vfio-pci::
+
+  ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
+
+3, Start testpmd and set vfs mac address::
+
+  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem=1024,1024 --file-prefix=pf -b 0000:18:02.0 -b 0000:18:06.0 -- -i
+  testpmd>set vf mac addr 0 0 00:12:34:56:78:01
+  testpmd>set vf mac addr 1 0 00:12:34:56:78:02
+
+4, Start dpdk l3fwd with 1:1 matched cores and queues::
+
+  ./examples/l3fwd/build/l3fwd -c 0x3c -n 4 -w 0000:18:02.0 -w 0000:18:06.0 -- -p 0x3 --config '(0,0,2),(1,0,3),(0,1,4),(1,1,5)'
+
+5, Send packet with frame size from 64bytes to 1518bytes with ixia traffic generator,
+make sure your traffic configuration meets LPM rules, and will go to all queues, all ports.
+Fill out this table with results.
+
++-------+------+--------+-----------+
+| Frame | mode | Mpps   | %linerate |
++=======+======+========+===========+
+| 64    | lpm  |        |           |
++-------+------+--------+-----------+
+| 128   | lpm  |        |           |
++-------+------+--------+-----------+
+| 256   | lpm  |        |           |
++-------+------+--------+-----------+
+| 512   | lpm  |        |           |
++-------+------+--------+-----------+
+| 1024  | lpm  |        |           |
++-------+------+--------+-----------+
+| 1518  | lpm  |        |           |
++-------+------+--------+-----------+
+
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test plan
  2019-05-08  9:51 [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test plan han yingya
@ 2019-05-08 10:45 ` Rami Rosen
  2019-05-13  9:00 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Rami Rosen @ 2019-05-08 10:45 UTC (permalink / raw)
  To: han yingya; +Cc: dts

[-- Attachment #1: Type: text/plain, Size: 42 bytes --]

Acked-by: Rami Rosen <ramirose@gmail.com>

[-- Attachment #2: Type: text/html, Size: 136 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test plan
  2019-05-08  9:51 [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test plan han yingya
  2019-05-08 10:45 ` Rami Rosen
@ 2019-05-13  9:00 ` Tu, Lijuan
  1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2019-05-13  9:00 UTC (permalink / raw)
  To: Han, YingyaX, dts; +Cc: Han, YingyaX

Applying: test_plan/vf_l3fwd: add vf l3fwd performance test plan
.git/rebase-apply/patch:188: new blank line at EOF.
+
warning: 1 line adds whitespace errors.

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of han yingya
> Sent: Wednesday, May 8, 2019 5:52 PM
> To: dts@dpdk.org
> Cc: Han, YingyaX <yingyax.han@intel.com>
> Subject: [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test
> plan
> 
> Signed-off-by: han yingya <yingyax.han@intel.com>
> ---
>  test_plans/vf_l3fwd_test_plan.rst | 177 ++++++++++++++++++++++++++++++
>  1 file changed, 177 insertions(+)
>  create mode 100644 test_plans/vf_l3fwd_test_plan.rst
> 
> diff --git a/test_plans/vf_l3fwd_test_plan.rst
> b/test_plans/vf_l3fwd_test_plan.rst
> new file mode 100644
> index 0000000..f56a904
> --- /dev/null
> +++ b/test_plans/vf_l3fwd_test_plan.rst
> @@ -0,0 +1,177 @@
> +.. Copyright (c) <2019>, Intel Corporation
> +      All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +==================================
> +VF L3 Forwarding Performance Tests
> +==================================
> +
> +This document provides benchmark test for NIC VFs which are created
> +from kernel PFs or DPDK PFs. These tests use l3fwd as a simple
> +forwarder between NIC vfs. The goal of this test plan is to have a
> +tested benchmark between NIC vfs.
> +
> +
> +Prerequisites
> +==============
> +
> +* Hardware requirements:
> +
> +  * XL710, XXV710: 2 ports from 2 NICs, 1 port per NIC, 2 cores & 2 queues
> per VF.
> +
> +    ::
> +
> +      +------------------------------+
> +      |  DUT           |  TESTER     |
> +      +==============================+
> +      | NIC-1,Port-1  ---  TG,Port-1 |
> +      | NIC-2,Port-1  ---  TG,Port-2 |
> +      +------------------------------+
> +
> +
> +  * X710: 4 ports from 1 NIC, 1 core 1 queues per port.
> +
> +    ::
> +
> +      +------------------------------+
> +      |  DUT           |  TESTER     |
> +      +==============================+
> +      | NIC-1,Port-1  ---  TG,Port-1 |
> +      | NIC-1,Port-2  ---  TG,Port-2 |
> +      | NIC-1,Port-3  ---  TG,Port-3 |
> +      | NIC-1,Port-4  ---  TG,Port-4 |
> +      +------------------------------+
> +
> +  * 825992: 2 ports from 2 NIC, 1 core 1 queues per port.
> +
> +    ::
> +
> +      + -----------------------------+
> +      |  DUT           |  TESTER     |
> +      +==============================+
> +      | NIC-1,Port-1  ---  TG,Port-1 |
> +      | NIC-2,Port-1  ---  TG,Port-2 |
> +      +------------------------------+
> +
> +==============
> +Setup overview
> +==============
> +
> +Set up topology as above based on the NIC used.
> +
> +Test Case 1: Measure performance with kernel PF & dpdk VF
> +========================================================
> +
> +1, Bind PF ports to kernel driver, i40e or ixgbe, then create 1 VF from
> +each PF, take XL710 for example::
> +
> +  echo 1 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs
> +  echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/sriov_numvfs
> +
> +2, Set vf mac address::
> +
> +  ip link set ens5f0 vf 0 mac 00:12:34:56:78:01  ip link set ens5f1 vf
> + 0 mac 00:12:34:56:78:02
> +
> +3, Bind all the created VFs to dpdk driver, igb_uio or vfio-pci::
> +
> +  ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
> +
> +4, Start dpdk l3fwd with 1:1 matched cores and queues::
> +
> +  ./examples/l3fwd/build/l3fwd -c 0xf -n 4 -- -p 0x3 --config
> '(0,0,0),(1,0,1),(0,1,2),(1,1,3)'
> +
> +5, Send packet with frame size from 64bytes to 1518bytes with ixia
> +traffic generator, make sure your traffic configuration meets LPM rules, and
> will go to all queues, all ports.
> +Fill out this table with results.
> +
> ++-------+------+--------+-----------+
> +| Frame | mode | Mpps   | %linerate |
> ++=======+======+========+===========+
> +| 64    | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 128   | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 256   | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 512   | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 1024  | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 1518  | lpm  |        |           |
> ++-------+------+--------+-----------+
> +
> +
> +Test Case 2: Measure performance with dpdk PF & dpdk VF
> +======================================================
> +
> +1, Bind PF ports to igb_uio driver, then create 1 VF from each PF, take
> +XL710 for example::
> +
> +  ./usertools/dpdk-devbind.py -b igb_uio 18:00.0 18:00.1  echo 1 >
> + /sys/bus/pci/devices/0000\:18\:00.0/max_vfs
> +  echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/max_vfs
> +
> +2, Bind the two created VFs to dpdk driver, igb_uio or vfio-pci::
> +
> +  ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
> +
> +3, Start testpmd and set vfs mac address::
> +
> +  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4
> + --socket-mem=1024,1024 --file-prefix=pf -b 0000:18:02.0 -b
> + 0000:18:06.0 -- -i  testpmd>set vf mac addr 0 0 00:12:34:56:78:01
> + testpmd>set vf mac addr 1 0 00:12:34:56:78:02
> +
> +4, Start dpdk l3fwd with 1:1 matched cores and queues::
> +
> +  ./examples/l3fwd/build/l3fwd -c 0x3c -n 4 -w 0000:18:02.0 -w 0000:18:06.0
> -- -p 0x3 --config '(0,0,2),(1,0,3),(0,1,4),(1,1,5)'
> +
> +5, Send packet with frame size from 64bytes to 1518bytes with ixia
> +traffic generator, make sure your traffic configuration meets LPM rules, and
> will go to all queues, all ports.
> +Fill out this table with results.
> +
> ++-------+------+--------+-----------+
> +| Frame | mode | Mpps   | %linerate |
> ++=======+======+========+===========+
> +| 64    | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 128   | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 256   | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 512   | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 1024  | lpm  |        |           |
> ++-------+------+--------+-----------+
> +| 1518  | lpm  |        |           |
> ++-------+------+--------+-----------+
> +
> --
> 2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-05-13  9:01 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-08  9:51 [dts] [PATCH V2]test_plan/vf_l3fwd: add vf l3fwd performance test plan han yingya
2019-05-08 10:45 ` Rami Rosen
2019-05-13  9:00 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).