* Re: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test
2019-05-14 18:09 [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test Xinfeng Zhao
@ 2019-05-22 5:33 ` Tu, Lijuan
2019-05-24 3:22 ` Chen, Zhaoyan
2019-05-29 2:37 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2019-05-22 5:33 UTC (permalink / raw)
To: Zhao, XinfengX, dts; +Cc: Zhao, XinfengX
No ack from BB
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Wednesday, May 15, 2019 2:10 AM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio
> unit test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> .../virtio_unit_cryptodev_func_test_plan.rst | 125
> +++++++++++++++++++++
> 1 file changed, 125 insertions(+)
> create mode 100644 test_plans/virtio_unit_cryptodev_func_test_plan.rst
>
> diff --git a/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> new file mode 100644
> index 0000000..3615cb2
> --- /dev/null
> +++ b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> @@ -0,0 +1,125 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===========================
> +CryptoDev virtio unit Tests
> +===========================
> +
> +Description
> +===========
> +
> +This document provides the plan for testing Cryptodev virtio API via
> Cryptodev unit tests.
> +Unit tests include supported Hardware and Software PMD(polling mode
> device) and supported algorithms.
> +
> +This test suite will run all cryptodev virtio related unit test cases.
> +Alternatively, you could execute the unit tests manually by app/test DPDK
> application.
> +
> +Unit Test List
> +==============
> +
> +- cryptodev_virtio_autotest
> +
> +Prerequisites
> +=============
> +
> +qemu version >= 2.12
> +in qemu enable vhost-user-crypto:
> +
> +./configure --target-list=x86_64-softmmu --enable-vhost-crypto
> +--prefix=/root/qemu-2.12 && make && make install
> +
> +the bin is in /root/qemu-2.12 folder, which is your specified
> +
> +Test Case Setup
> +===============
> +
> + +--------------+
> + | +--------+ |
> + | | VM | |
> + | +--------+ |
> + | |
> + | HOST |
> + +--------------+
> +
> +In Host:
> +
> +# Build DPDK and vhost_crypto app
> +
> + enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
> + make install -j T=x86_64-native-linuxapp-gcc
> + make -C examples/vhost_crypto
> +
> +# Run the dpdk vhost sample
> +
> + ./examples/vhost_crypto/build/vhost-crypto --file-
> prefix="vhost_crypto_1"
> + [EAL options]
> + [Cryptodev PMD]
> + -- --cdev-queue-id 0
> + --socket-file THE PATH OF SOCKET FILE
> +
> +# bind vfio-pci
> +
> + usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0
> + 0000:60:00.1
> +
> +# Start VM by the qemu
> +
> + taskset -c 11,12,13,14 /root/qemu-2.12/bin/qemu-system-x86_64 -
> name vm0
> + -enable-kvm -pidfile /tmp/.vm0.pid
> + -cpu host -smp 4
> + -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-
> path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
> + -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net
> user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
> + -device virtio-serial
> + -device
> virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
> + -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
> + -vnc :1
> + -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object
> cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-
> crypto-pci,id=crypto0,cryptodev=cryptodev0
> + -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object
> cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-
> crypto-pci,id=crypto1,cryptodev=cryptodev1
> + -drive file=/root/VMs/virtio_crypto_test_710_1.img
> + -device vfio-pci,host=0000:60:00.0,id=pt_0
> + -device vfio-pci,host=0000:60:00.1,id=pt_1
> +
> +In VM:
> +
> +# set virtio device
> +
> + modprobe uio_pci_generic
> + echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> +
> +# Build the guest DPDK and app/test
> +
> +# Manually verify the app/test by this command, as example, in your build
> folder:
> +
> + ./app/test -c 1 -n 1
> + RTE>> cryptodev_virtio_autotest
> +
> +Expected all tests could pass in testing.
> --
> 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test
2019-05-14 18:09 [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test Xinfeng Zhao
2019-05-22 5:33 ` Tu, Lijuan
@ 2019-05-24 3:22 ` Chen, Zhaoyan
2019-05-29 2:37 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Chen, Zhaoyan @ 2019-05-24 3:22 UTC (permalink / raw)
To: Zhao, XinfengX, dts; +Cc: Zhao, XinfengX, Chen, Zhaoyan
Acked-by: Zhaoyan Chen<zhaoyan.chen@intel.com>
Regards,
Zhaoyan Chen
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Wednesday, May 15, 2019 2:10 AM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> .../virtio_unit_cryptodev_func_test_plan.rst | 125 +++++++++++++++++++++
> 1 file changed, 125 insertions(+)
> create mode 100644 test_plans/virtio_unit_cryptodev_func_test_plan.rst
>
> diff --git a/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> new file mode 100644
> index 0000000..3615cb2
> --- /dev/null
> +++ b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> @@ -0,0 +1,125 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===========================
> +CryptoDev virtio unit Tests
> +===========================
> +
> +Description
> +===========
> +
> +This document provides the plan for testing Cryptodev virtio API via Cryptodev
> unit tests.
> +Unit tests include supported Hardware and Software PMD(polling mode device)
> and supported algorithms.
> +
> +This test suite will run all cryptodev virtio related unit test cases.
> +Alternatively, you could execute the unit tests manually by app/test DPDK
> application.
> +
> +Unit Test List
> +==============
> +
> +- cryptodev_virtio_autotest
> +
> +Prerequisites
> +=============
> +
> +qemu version >= 2.12
> +in qemu enable vhost-user-crypto:
> +
> +./configure --target-list=x86_64-softmmu --enable-vhost-crypto
> +--prefix=/root/qemu-2.12 && make && make install
> +
> +the bin is in /root/qemu-2.12 folder, which is your specified
> +
> +Test Case Setup
> +===============
> +
> + +--------------+
> + | +--------+ |
> + | | VM | |
> + | +--------+ |
> + | |
> + | HOST |
> + +--------------+
> +
> +In Host:
> +
> +# Build DPDK and vhost_crypto app
> +
> + enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
> + make install -j T=x86_64-native-linuxapp-gcc
> + make -C examples/vhost_crypto
> +
> +# Run the dpdk vhost sample
> +
> + ./examples/vhost_crypto/build/vhost-crypto --file-prefix="vhost_crypto_1"
> + [EAL options]
> + [Cryptodev PMD]
> + -- --cdev-queue-id 0
> + --socket-file THE PATH OF SOCKET FILE
> +
> +# bind vfio-pci
> +
> + usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0
> + 0000:60:00.1
> +
> +# Start VM by the qemu
> +
> + taskset -c 11,12,13,14 /root/qemu-2.12/bin/qemu-system-x86_64 -name vm0
> + -enable-kvm -pidfile /tmp/.vm0.pid
> + -cpu host -smp 4
> + -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-
> path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
> + -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net
> user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
> + -device virtio-serial
> + -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
> + -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
> + -vnc :1
> + -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object
> cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-crypto-
> pci,id=crypto0,cryptodev=cryptodev0
> + -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object
> cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-crypto-
> pci,id=crypto1,cryptodev=cryptodev1
> + -drive file=/root/VMs/virtio_crypto_test_710_1.img
> + -device vfio-pci,host=0000:60:00.0,id=pt_0
> + -device vfio-pci,host=0000:60:00.1,id=pt_1
> +
> +In VM:
> +
> +# set virtio device
> +
> + modprobe uio_pci_generic
> + echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> +
> +# Build the guest DPDK and app/test
> +
> +# Manually verify the app/test by this command, as example, in your build folder:
> +
> + ./app/test -c 1 -n 1
> + RTE>> cryptodev_virtio_autotest
> +
> +Expected all tests could pass in testing.
> --
> 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test
2019-05-14 18:09 [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio unit test Xinfeng Zhao
2019-05-22 5:33 ` Tu, Lijuan
2019-05-24 3:22 ` Chen, Zhaoyan
@ 2019-05-29 2:37 ` Tu, Lijuan
2 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2019-05-29 2:37 UTC (permalink / raw)
To: Zhao, XinfengX, dts; +Cc: Zhao, XinfengX
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Wednesday, May 15, 2019 2:10 AM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V3] test_plan: add test plan for the cryptodev virtio
> unit test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> .../virtio_unit_cryptodev_func_test_plan.rst | 125
> +++++++++++++++++++++
> 1 file changed, 125 insertions(+)
> create mode 100644 test_plans/virtio_unit_cryptodev_func_test_plan.rst
>
> diff --git a/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> new file mode 100644
> index 0000000..3615cb2
> --- /dev/null
> +++ b/test_plans/virtio_unit_cryptodev_func_test_plan.rst
> @@ -0,0 +1,125 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===========================
> +CryptoDev virtio unit Tests
> +===========================
> +
> +Description
> +===========
> +
> +This document provides the plan for testing Cryptodev virtio API via
> Cryptodev unit tests.
> +Unit tests include supported Hardware and Software PMD(polling mode
> device) and supported algorithms.
> +
> +This test suite will run all cryptodev virtio related unit test cases.
> +Alternatively, you could execute the unit tests manually by app/test DPDK
> application.
> +
> +Unit Test List
> +==============
> +
> +- cryptodev_virtio_autotest
> +
> +Prerequisites
> +=============
> +
> +qemu version >= 2.12
> +in qemu enable vhost-user-crypto:
> +
> +./configure --target-list=x86_64-softmmu --enable-vhost-crypto
> +--prefix=/root/qemu-2.12 && make && make install
> +
> +the bin is in /root/qemu-2.12 folder, which is your specified
> +
> +Test Case Setup
> +===============
> +
> + +--------------+
> + | +--------+ |
> + | | VM | |
> + | +--------+ |
> + | |
> + | HOST |
> + +--------------+
> +
> +In Host:
> +
> +# Build DPDK and vhost_crypto app
> +
> + enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
> + make install -j T=x86_64-native-linuxapp-gcc
> + make -C examples/vhost_crypto
> +
> +# Run the dpdk vhost sample
> +
> + ./examples/vhost_crypto/build/vhost-crypto --file-
> prefix="vhost_crypto_1"
> + [EAL options]
> + [Cryptodev PMD]
> + -- --cdev-queue-id 0
> + --socket-file THE PATH OF SOCKET FILE
> +
> +# bind vfio-pci
> +
> + usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0
> + 0000:60:00.1
> +
> +# Start VM by the qemu
> +
> + taskset -c 11,12,13,14 /root/qemu-2.12/bin/qemu-system-x86_64 -
> name vm0
> + -enable-kvm -pidfile /tmp/.vm0.pid
> + -cpu host -smp 4
> + -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-
> path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
> + -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net
> user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
> + -device virtio-serial
> + -device
> virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
> + -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
> + -vnc :1
> + -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object
> cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-
> crypto-pci,id=crypto0,cryptodev=cryptodev0
> + -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object
> cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-
> crypto-pci,id=crypto1,cryptodev=cryptodev1
> + -drive file=/root/VMs/virtio_crypto_test_710_1.img
> + -device vfio-pci,host=0000:60:00.0,id=pt_0
> + -device vfio-pci,host=0000:60:00.1,id=pt_1
> +
> +In VM:
> +
> +# set virtio device
> +
> + modprobe uio_pci_generic
> + echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> +
> +# Build the guest DPDK and app/test
> +
> +# Manually verify the app/test by this command, as example, in your build
> folder:
> +
> + ./app/test -c 1 -n 1
> + RTE>> cryptodev_virtio_autotest
> +
> +Expected all tests could pass in testing.
> --
> 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread