* [dts] [PATCH v1] test_plans/vhost_gro: add test plan for vhost gro test
@ 2019-05-13 20:14 Yinan
2019-05-23 6:16 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-05-13 20:14 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 13315 bytes --]
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
test_plans/vhost_gro_test_plan.rst | 297 +++++++++++++++++++++++++++++
1 file changed, 297 insertions(+)
create mode 100644 test_plans/vhost_gro_test_plan.rst
diff --git a/test_plans/vhost_gro_test_plan.rst b/test_plans/vhost_gro_test_plan.rst
new file mode 100644
index 0000000..a0ea3b9
--- /dev/null
+++ b/test_plans/vhost_gro_test_plan.rst
@@ -0,0 +1,297 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==================
+DPDK GRO test plan
+==================
+
+This test plan will cover vdev GRO light/heavy mode test.
+As we need use checksum fwd in this test and make sure ping and iperf packets can reach each side.
+
+Prerequisites
+=============
+
+Modify the testpmd code as following::
+
+ --- a/app/test-pmd/csumonly.c
+ +++ b/app/test-pmd/csumonly.c
+ @@ -693,10 +693,12 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
+ * and inner headers */
+
+ eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ +#if 0
+ ether_addr_copy(&peer_eth_addrs[fs->peer_addr],
+ ð_hdr->d_addr);
+ ether_addr_copy(&ports[fs->tx_port].eth_addr,
+ ð_hdr->s_addr);
+ +#endif
+ parse_ethernet(eth_hdr, &info);
+ l3_hdr = (char *)eth_hdr + info.l2_len;
+
+Test flow
+=========
+
+NIC2(In kernel) -> NIC1(DPDK) -> testpmd(csum fwd) -> Vhost -> Virtio-net
+
+Test Case1: DPDK GRO lightmode test with tcp traffic
+====================================================
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+ ip netns del ns1
+ ip netns add ns1
+ ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
+ ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+ ip netns exec ns1 ethtool -K [enp216s0f0] tso on
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 1::
+
+ ./dpdk-devbind.py -b igb_uio xx:xx.x
+ ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port stop 1
+ testpmd>csum set tcp hw 0
+ testpmd>csum set ip hw 0
+ testpmd>csum set tcp hw 1
+ testpmd>csum set ip hw 1
+ testpmd>set port 0 gro on
+ testpmd>set gro flush 1
+ testpmd>port start 0
+ testpmd>port start 1
+ testpmd>start
+
+3. Set up vm with virto device and using kernel virtio-net driver::
+
+ taskset -c 13 \
+ qemu-system-x86_64 -name us-vhost-vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+ -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+ ifconfig [ens3] 1.1.1.2 up # [ens3] is the name of virtio-net
+ ethtool -K [ens3] gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+ Host side : ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
+ VM side: iperf -s
+
+Test Case2: DPDK GRO heavymode test with tcp traffic
+====================================================
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+ ip netns del ns1
+ ip netns add ns1
+ ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
+ ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+ ip netns exec ns1 ethtool -K [enp216s0f0] tso on
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 2::
+
+ ./dpdk-devbind.py -b igb_uio xx:xx.x
+ ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port stop 1
+ testpmd>csum set tcp hw 0
+ testpmd>csum set ip hw 0
+ testpmd>csum set tcp hw 1
+ testpmd>csum set ip hw 1
+ testpmd>set port 0 gro on
+ testpmd>set gro flush 2
+ testpmd>port start 0
+ testpmd>port start 1
+ testpmd>start
+
+3. Set up vm with virto device and using kernel virtio-net driver::
+
+ taskset -c 13 \
+ qemu-system-x86_64 -name us-vhost-vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+ -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+ ifconfig [ens3] 1.1.1.2 up # [ens3] is the name of virtio-net
+ ethtool -K [ens3] gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+ Host side : ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
+ VM side: iperf -s
+
+Test Case3: DPDK GRO heavymode_flush4 test with tcp traffic
+===========================================================
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+ ip netns del ns1
+ ip netns add ns1
+ ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
+ ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+ ip netns exec ns1 ethtool -K [enp216s0f0] tso on
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 4::
+
+ ./dpdk-devbind.py -b igb_uio xx:xx.x
+ ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port stop 1
+ testpmd>csum set tcp hw 0
+ testpmd>csum set ip hw 0
+ testpmd>csum set tcp hw 1
+ testpmd>csum set ip hw 1
+ testpmd>set port 0 gro on
+ testpmd>set gro flush 4
+ testpmd>port start 0
+ testpmd>port start 1
+ testpmd>start
+
+3. Set up vm with virto device and using kernel virtio-net driver::
+
+ taskset -c 13 \
+ qemu-system-x86_64 -name us-vhost-vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+ -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+ ifconfig [ens3] 1.1.1.2 up # [ens3] is the name of virtio-net
+ ethtool -K [ens3] gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+ Host side : ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
+ VM side: iperf -s
+
+Test Case4: DPDK GRO test with vxlan traffic
+============================================
+
+Vxlan topology
+--------------
+ VM Host
+50.1.1.2 50.1.1.1
+ | |
+1.1.2.3 1.1.2.4
+ |------------Testpmd------------|
+
+1. Connect two nic port directly, put nic2 into another namesapce and create Host VxLAN port::
+
+ ip netns del ns1
+ ip netns add ns1
+ ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
+ ip netns exec ns1 ifconfig [enp216s0f0] 1.1.2.4/24 up
+ VXLAN_NAME=vxlan1
+ VXLAN_IP=50.1.1.1
+ IF_NAME=[enp216s0f0]
+ VM_IP=1.1.2.3
+ ip netns exec t2 ip link add $VXLAN_NAME type vxlan id 42 dev $IF_NAME dstport 4789
+ ip netns exec t2 bridge fdb append to 00:00:00:00:00:00 dst $VM_IP dev $VXLAN_NAME
+ ip netns exec t2 ip addr add $VXLAN_IP/24 dev $VXLAN_NAME
+ ip netns exec t2 ip link set up dev $VXLAN_NAME
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 4::
+
+ ./dpdk-devbind.py -b igb_uio xx:xx.x
+ ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port stop 1
+ testpmd>csum set tcp hw 0
+ testpmd>csum set ip hw 0
+ testpmd>csum parse-tunnel on 0
+ testpmd>csum parse-tunnel on 1
+ testpmd>csum set outer-ip hw 0
+ testpmd>csum set tcp hw 1
+ testpmd>csum set ip hw 1
+ testpmd>set port 0 gro on
+ testpmd>set gro flush 4
+ testpmd>port start 0
+ testpmd>port start 1
+ testpmd>start
+
+3. Set up vm with virto device and using kernel virtio-net driver::
+
+ taskset -c 13 \
+ qemu-system-x86_64 -name us-vhost-vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+ -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+ ip link add vxlan0 type vxlan id 42 dev [ens3] dstport 4789 # [ens3] is the name of virtio-net
+ bridge fdb add to 00:00:00:00:00:00 dst 1.1.2.4 dev vxlan0
+ ip addr add 50.1.1.2/24 dev vxlan0
+ ip link set up dev vxlan0
+ ifconfig [ens3] 1.1.2.3/24 up
+ ifconfig -a
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+ Host side : ip netns exec t2 iperf -c 50.1.1.2 -i 2 -t 60 -f g -m
+ VM side: iperf -s -f g
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans/vhost_gro: add test plan for vhost gro test
2019-05-13 20:14 [dts] [PATCH v1] test_plans/vhost_gro: add test plan for vhost gro test Yinan
@ 2019-05-23 6:16 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-05-23 6:16 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Tuesday, May 14, 2019 4:14 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans/vhost_gro: add test plan for vhost gro
> test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> test_plans/vhost_gro_test_plan.rst | 297 +++++++++++++++++++++++++++++
> 1 file changed, 297 insertions(+)
> create mode 100644 test_plans/vhost_gro_test_plan.rst
>
> diff --git a/test_plans/vhost_gro_test_plan.rst
> b/test_plans/vhost_gro_test_plan.rst
> new file mode 100644
> index 0000000..a0ea3b9
> --- /dev/null
> +++ b/test_plans/vhost_gro_test_plan.rst
> @@ -0,0 +1,297 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==================
> +DPDK GRO test plan
> +==================
> +
> +This test plan will cover vdev GRO light/heavy mode test.
> +As we need use checksum fwd in this test and make sure ping and iperf
> packets can reach each side.
> +
> +Prerequisites
> +=============
> +
> +Modify the testpmd code as following::
> +
> + --- a/app/test-pmd/csumonly.c
> + +++ b/app/test-pmd/csumonly.c
> + @@ -693,10 +693,12 @@ pkt_burst_checksum_forward(struct
> fwd_stream *fs)
> + * and inner headers */
> +
> + eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
> + +#if 0
> + ether_addr_copy(&peer_eth_addrs[fs->peer_addr],
> + ð_hdr->d_addr);
> + ether_addr_copy(&ports[fs->tx_port].eth_addr,
> + ð_hdr->s_addr);
> + +#endif
> + parse_ethernet(eth_hdr, &info);
> + l3_hdr = (char *)eth_hdr + info.l2_len;
> +
> +Test flow
> +=========
> +
> +NIC2(In kernel) -> NIC1(DPDK) -> testpmd(csum fwd) -> Vhost ->
> +Virtio-net
> +
> +Test Case1: DPDK GRO lightmode test with tcp traffic
> +====================================================
> +
> +1. Connect two nic port directly, put nic2 into another namesapce and turn
> on the tso of this nic port by below cmds::
> +
> + ip netns del ns1
> + ip netns add ns1
> + ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
> + ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
> + ip netns exec ns1 ethtool -K [enp216s0f0] tso on
> +
> +2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush
> interval to 1::
> +
> + ./dpdk-devbind.py -b igb_uio xx:xx.x
> + ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --txd=1024 --rxd=1024
> + testpmd>set fwd csum
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port stop 1
> + testpmd>csum set tcp hw 0
> + testpmd>csum set ip hw 0
> + testpmd>csum set tcp hw 1
> + testpmd>csum set ip hw 1
> + testpmd>set port 0 gro on
> + testpmd>set gro flush 1
> + testpmd>port start 0
> + testpmd>port start 1
> + testpmd>start
> +
> +3. Set up vm with virto device and using kernel virtio-net driver::
> +
> + taskset -c 13 \
> + qemu-system-x86_64 -name us-vhost-vm1 \
> + -cpu host -enable-kvm -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
> + -numa node,memdev=mem \
> + -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -
> net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
> + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,h
> ost_tso4=on,guest_tso4=on \
> + -vnc :10 -daemonize
> +
> +4. In vm, config the virtio-net device with ip and turn the kernel gro off::
> +
> + ifconfig [ens3] 1.1.1.2 up # [ens3] is the name of virtio-net
> + ethtool -K [ens3] gro off
> +
> +5. Start iperf test, run iperf server at vm side and iperf client at host side,
> check throughput in log::
> +
> + Host side : ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
> + VM side: iperf -s
> +
> +Test Case2: DPDK GRO heavymode test with tcp traffic
> +====================================================
> +
> +1. Connect two nic port directly, put nic2 into another namesapce and turn
> on the tso of this nic port by below cmds::
> +
> + ip netns del ns1
> + ip netns add ns1
> + ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
> + ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
> + ip netns exec ns1 ethtool -K [enp216s0f0] tso on
> +
> +2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush
> interval to 2::
> +
> + ./dpdk-devbind.py -b igb_uio xx:xx.x
> + ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --txd=1024 --rxd=1024
> + testpmd>set fwd csum
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port stop 1
> + testpmd>csum set tcp hw 0
> + testpmd>csum set ip hw 0
> + testpmd>csum set tcp hw 1
> + testpmd>csum set ip hw 1
> + testpmd>set port 0 gro on
> + testpmd>set gro flush 2
> + testpmd>port start 0
> + testpmd>port start 1
> + testpmd>start
> +
> +3. Set up vm with virto device and using kernel virtio-net driver::
> +
> + taskset -c 13 \
> + qemu-system-x86_64 -name us-vhost-vm1 \
> + -cpu host -enable-kvm -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
> + -numa node,memdev=mem \
> + -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -
> net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
> + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,h
> ost_tso4=on,guest_tso4=on \
> + -vnc :10 -daemonize
> +
> +4. In vm, config the virtio-net device with ip and turn the kernel gro off::
> +
> + ifconfig [ens3] 1.1.1.2 up # [ens3] is the name of virtio-net
> + ethtool -K [ens3] gro off
> +
> +5. Start iperf test, run iperf server at vm side and iperf client at host side,
> check throughput in log::
> +
> + Host side : ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
> + VM side: iperf -s
> +
> +Test Case3: DPDK GRO heavymode_flush4 test with tcp traffic
> +===========================================================
> +
> +1. Connect two nic port directly, put nic2 into another namesapce and turn
> on the tso of this nic port by below cmds::
> +
> + ip netns del ns1
> + ip netns add ns1
> + ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
> + ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
> + ip netns exec ns1 ethtool -K [enp216s0f0] tso on
> +
> +2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush
> interval to 4::
> +
> + ./dpdk-devbind.py -b igb_uio xx:xx.x
> + ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --txd=1024 --rxd=1024
> + testpmd>set fwd csum
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port stop 1
> + testpmd>csum set tcp hw 0
> + testpmd>csum set ip hw 0
> + testpmd>csum set tcp hw 1
> + testpmd>csum set ip hw 1
> + testpmd>set port 0 gro on
> + testpmd>set gro flush 4
> + testpmd>port start 0
> + testpmd>port start 1
> + testpmd>start
> +
> +3. Set up vm with virto device and using kernel virtio-net driver::
> +
> + taskset -c 13 \
> + qemu-system-x86_64 -name us-vhost-vm1 \
> + -cpu host -enable-kvm -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
> + -numa node,memdev=mem \
> + -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -
> net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
> + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,h
> ost_tso4=on,guest_tso4=on \
> + -vnc :10 -daemonize
> +
> +4. In vm, config the virtio-net device with ip and turn the kernel gro off::
> +
> + ifconfig [ens3] 1.1.1.2 up # [ens3] is the name of virtio-net
> + ethtool -K [ens3] gro off
> +
> +5. Start iperf test, run iperf server at vm side and iperf client at host side,
> check throughput in log::
> +
> + Host side : ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
> + VM side: iperf -s
> +
> +Test Case4: DPDK GRO test with vxlan traffic
> +============================================
> +
> +Vxlan topology
> +--------------
> + VM Host
> +50.1.1.2 50.1.1.1
> + | |
> +1.1.2.3 1.1.2.4
> + |------------Testpmd------------|
> +
> +1. Connect two nic port directly, put nic2 into another namesapce and
> create Host VxLAN port::
> +
> + ip netns del ns1
> + ip netns add ns1
> + ip link set [enp216s0f0] netns ns1 # [enp216s0f0] is the name of nic2
> + ip netns exec ns1 ifconfig [enp216s0f0] 1.1.2.4/24 up
> + VXLAN_NAME=vxlan1
> + VXLAN_IP=50.1.1.1
> + IF_NAME=[enp216s0f0]
> + VM_IP=1.1.2.3
> + ip netns exec t2 ip link add $VXLAN_NAME type vxlan id 42 dev
> $IF_NAME dstport 4789
> + ip netns exec t2 bridge fdb append to 00:00:00:00:00:00 dst $VM_IP dev
> $VXLAN_NAME
> + ip netns exec t2 ip addr add $VXLAN_IP/24 dev $VXLAN_NAME
> + ip netns exec t2 ip link set up dev $VXLAN_NAME
> +
> +2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush
> interval to 4::
> +
> + ./dpdk-devbind.py -b igb_uio xx:xx.x
> + ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --txd=1024 --rxd=1024
> + testpmd>set fwd csum
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port stop 1
> + testpmd>csum set tcp hw 0
> + testpmd>csum set ip hw 0
> + testpmd>csum parse-tunnel on 0
> + testpmd>csum parse-tunnel on 1
> + testpmd>csum set outer-ip hw 0
> + testpmd>csum set tcp hw 1
> + testpmd>csum set ip hw 1
> + testpmd>set port 0 gro on
> + testpmd>set gro flush 4
> + testpmd>port start 0
> + testpmd>port start 1
> + testpmd>start
> +
> +3. Set up vm with virto device and using kernel virtio-net driver::
> +
> + taskset -c 13 \
> + qemu-system-x86_64 -name us-vhost-vm1 \
> + -cpu host -enable-kvm -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
> + -numa node,memdev=mem \
> + -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -
> net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
> + -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
> + -chardev socket,id=char0,path=./vhost-net \
> + -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,h
> ost_tso4=on,guest_tso4=on \
> + -vnc :10 -daemonize
> +
> +4. In vm, config the virtio-net device with ip and turn the kernel gro off::
> +
> + ip link add vxlan0 type vxlan id 42 dev [ens3] dstport 4789 # [ens3] is
> the name of virtio-net
> + bridge fdb add to 00:00:00:00:00:00 dst 1.1.2.4 dev vxlan0
> + ip addr add 50.1.1.2/24 dev vxlan0
> + ip link set up dev vxlan0
> + ifconfig [ens3] 1.1.2.3/24 up
> + ifconfig -a
> +
> +5. Start iperf test, run iperf server at vm side and iperf client at host side,
> check throughput in log::
> +
> + Host side : ip netns exec t2 iperf -c 50.1.1.2 -i 2 -t 60 -f g -m
> + VM side: iperf -s -f g
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-05-23 6:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-13 20:14 [dts] [PATCH v1] test_plans/vhost_gro: add test plan for vhost gro test Yinan
2019-05-23 6:16 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).