From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "thaq@marvell.com" <thaq@marvell.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "fmasood@marvell.com" <fmasood@marvell.com>,
"avijay@marvell.com" <avijay@marvell.com>,
"jerinj@marvell.com" <jerinj@marvell.com>
Subject: Re: [dts] [PATCH v2] Adding Eventdev_pipeline feature performance Testplan
Date: Wed, 12 Jun 2019 03:02:21 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BAB9495@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1560157240-25125-1-git-send-email-thaq@marvell.com>
Hi thaq,
I think you should submit the whole test plan, because there is no test_plans/eventdev_pipeline_test_plan.rst in current DTS.
thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of thaq@marvell.com
> Sent: Monday, June 10, 2019 5:01 PM
> To: dts@dpdk.org
> Cc: fmasood@marvell.com; avijay@marvell.com; jerinj@marvell.com;
> Thanseerulhaq <thaq@marvell.com>
> Subject: [dts] [PATCH v2] Adding Eventdev_pipeline feature performance
> Testplan
>
> From: Thanseerulhaq <thaq@marvell.com>
>
> Adding testcase for 1/2/4 NIC ports for eventdev features atomic, parallel,
> order stages.
>
> Signed-off-by: Thanseerulhaq <thaq@marvell.com>
> ---
> test_plans/eventdev_pipeline_perf_test_plan.rst | 58 ++++++++++++-----------
> --
> 1 file changed, 29 insertions(+), 29 deletions(-)
>
> diff --git a/test_plans/eventdev_pipeline_perf_test_plan.rst
> b/test_plans/eventdev_pipeline_perf_test_plan.rst
> index f2b2a7e..619f9a3 100644
> --- a/test_plans/eventdev_pipeline_perf_test_plan.rst
> +++ b/test_plans/eventdev_pipeline_perf_test_plan.rst
> @@ -30,11 +30,11 @@ echo 24 > /proc/sys/vm/nr_hugepages
>
> Configure limits of Eventdev devices
> ====================================
> -Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> +Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
>
> -Example ::
> +Example ::
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
> echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
> echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> @@ -56,8 +56,8 @@ Description: Execute performance test with Atomic_atq
> type of stage in multi-flo
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -D, --dump Print detailed statistics before exit
> @@ -74,13 +74,13 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -p --dump
>
> - Parameters:
> + Parameters:
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -p, --parallel : Use parallel scheduling
> @@ -97,14 +97,14 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl 1. Run the sample with below
> command::
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -o --dump
> -
> - Parameters:
> +
> + Parameters:
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -o, --ordered Use ordered scheduling
> @@ -127,8 +127,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -D, --dump Print detailed statistics before exit
> @@ -145,13 +145,13 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dump
>
> - Parameters:
> + Parameters:
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -p, --parallel : Use parallel scheduling
> @@ -168,14 +168,14 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl 1. Run the sample with below
> command::
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dump
> -
> - Parameters:
> +
> + Parameters:
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -o, --ordered Use ordered scheduling
> @@ -198,8 +198,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -D, --dump Print detailed statistics before exit
> @@ -216,13 +216,13 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -p --dump
>
> - Parameters:
> + Parameters:
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -p, --parallel : Use parallel scheduling
> @@ -239,14 +239,14 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl 1. Run the sample with below
> command::
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -o --dump
> -
> - Parameters:
> +
> + Parameters:
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> - EAL Commands
> + several times (once per device).
> + EAL Commands
> -w, --worker-mask=core mask : Run worker on CPUs in core mask
> -n, --packets=N : Send N packets (default ~32M), 0 implies no
> limit
> -o, --ordered Use ordered scheduling
> --
> 1.8.3.1
next prev parent reply other threads:[~2019-06-12 3:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 7:22 [dts] [PATCH] eventdev_pipeline_perf_test_plan.rst: " thaq
2019-06-05 2:31 ` Tu, Lijuan
2019-06-10 9:00 ` [dts] [PATCH v2] " thaq
2019-06-12 3:02 ` Tu, Lijuan [this message]
2019-06-12 5:02 ` Thanseerul Haq
2019-06-12 5:34 ` Tu, Lijuan
2019-06-12 6:38 ` Thanseerul Haq
2019-06-12 7:03 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BAB9495@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=avijay@marvell.com \
--cc=dts@dpdk.org \
--cc=fmasood@marvell.com \
--cc=jerinj@marvell.com \
--cc=thaq@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).