From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH] test_plans/delete duplicate test plan of virtio
Date: Wed, 26 Jun 2019 07:05:28 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BAC4F33@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20190616230449.77008-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, June 17, 2019 7:05 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH] test_plans/delete duplicate test plan of virtio
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...ths_port_restart_performance_test_plan.rst | 298 ------------------
> 1 file changed, 298 deletions(-)
> delete mode 100644
> test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
>
> diff --git
> a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
> b/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
> deleted file mode 100644
> index dae7ea2..0000000
> ---
> a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
> +++ /dev/null
> @@ -1,298 +0,0 @@
> -.. Copyright (c) <2010-2017>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -===========================================
> -Loopback multi-paths and port restart Tests -
> ===========================================
> -
> -
> -Description
> -===========
> -
> -Benchmark vhost/virtio-user loopback performance for 7 RX/TX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, -Inorder no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> -Also cover port restart test with each path.
> -
> -Test Case 1: vhost/virtio-user loopback test with Virtio 1.1 mergeable path -
> ================================================================
> ===========
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> -
> -
> -Test Case 2: vhost/virtio-user loopback test with Virtio 1.1 no-mergeable
> path -
> ================================================================
> ==============
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> -
> -Test Case 3: vhost/virtio-user loopback test with Inorder mergeable path -
> ================================================================
> ===========
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> -
> -Test Case 4: vhost/virtio-user loopback test with Inorder no-mergeable path
> -
> ================================================================
> ===========
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> -
> -Test Case 5: vhost/virtio-user loopback test with Mergeable path -
> ================================================================
> ===========
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> -
> -
> -Test Case 6: vhost/virtio-user loopback test with Normal path -
> ================================================================
> ===========
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> -
> -Test Case 7: vhost/virtio-user loopback test with Vector_RX path -
> ================================================================
> ===========
> -
> -1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
> -
> - rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> - --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> -
> -2. Launch virtio-user by below command::
> -
> - ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> - --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> - >start
> -
> -3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> -
> - testpmd>set txpkts [frame_size]
> - testpmd>start tx_first 32
> - testpmd>start
> -
> -4. Get throughput 10 times and calculate the average throughput::
> -
> - testpmd>show port stats all
> -
> -5. Port restart by below command and re-calculate the average througnput::
> -
> - testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> --
> 2.17.1
prev parent reply other threads:[~2019-06-26 7:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-16 23:04 Yinan
2019-06-26 7:05 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BAC4F33@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).