test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH] test_plans/delete duplicate test plan of virtio
@ 2019-06-16 23:04 Yinan
  2019-06-26  7:05 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-06-16 23:04 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 ...ths_port_restart_performance_test_plan.rst | 298 ------------------
 1 file changed, 298 deletions(-)
 delete mode 100644 test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst

diff --git a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
deleted file mode 100644
index dae7ea2..0000000
--- a/test_plans/loopback_multi_paths_port_restart_performance_test_plan.rst
+++ /dev/null
@@ -1,298 +0,0 @@
-.. Copyright (c) <2010-2017>, Intel Corporation
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===========================================
-Loopback multi-paths and port restart Tests
-===========================================
-
-
-Description
-===========
-
-Benchmark vhost/virtio-user loopback performance for 7 RX/TX PATHs.
-Includes Mergeable, Normal, Vector_RX, Inorder mergeable,
-Inorder no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
-Also cover port restart test with each path.
-
-Test Case 1: vhost/virtio-user loopback test with Virtio 1.1 mergeable path
-===========================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-
-
-Test Case 2: vhost/virtio-user loopback test with Virtio 1.1 no-mergeable path
-==============================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-
-Test Case 3: vhost/virtio-user loopback test with Inorder mergeable path
-===========================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-
-Test Case 4: vhost/virtio-user loopback test with Inorder no-mergeable path
-===========================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-
-Test Case 5: vhost/virtio-user loopback test with Mergeable path
-===========================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-
-
-Test Case 6: vhost/virtio-user loopback test with Normal path
-===========================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
-    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-
-Test Case 7: vhost/virtio-user loopback test with Vector_RX path
-===========================================================================
-
-1. Not bind nic port to igb_uio, launch vhost testpmd by below command::
-
-    rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
-    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-
-2. Launch virtio-user by below command::
-
-    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
-    --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
-    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
-    >set fwd mac
-    >start
-
-3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
-    testpmd>set txpkts [frame_size]
-    testpmd>start tx_first 32
-    testpmd>start
-
-4. Get throughput 10 times and calculate the average throughput::
-
-    testpmd>show port stats all
-
-5. Port restart by below command and re-calculate the average througnput::
-
-    testpmd>stop
-    testpmd>clear port stats all
-    testpmd>start
-    testpmd>show port stats all
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-06-26  7:05 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-16 23:04 [dts] [PATCH] test_plans/delete duplicate test plan of virtio Yinan
2019-06-26  7:05 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).