* [dts] [PATCH] tests/TestSuite_vlan_ethertype_config.py: Added condition check to selected "tpids" based on cards.
@ 2019-06-17 8:21 thaq
2019-06-26 7:08 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: thaq @ 2019-06-17 8:21 UTC (permalink / raw)
To: dts; +Cc: fmasood, avijay, Thanseerulhaq
From: Thanseerulhaq <thaq@marvell.com>
cavium_a063 cards supports only default tpids in rx mode so added conditon checks.
Listing "test_vlan_qinq_tpid" & test_vlan_change_tpid testcase of vlan_ethertype_config as invalid for cavium_a063 cards.
Signed-off-by: Thanseerulhaq <thaq@marvell.com>
---
conf/test_case_checklist.json | 16 ++++++++++++++++
tests/TestSuite_vlan_ethertype_config.py | 24 ++++++++++++++++++++----
2 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/conf/test_case_checklist.json b/conf/test_case_checklist.json
index 7b46bc1..1c4dc6d 100644
--- a/conf/test_case_checklist.json
+++ b/conf/test_case_checklist.json
@@ -2103,6 +2103,7 @@
"fortville_spirit_single",
"cavium_a034",
"cavium_a011",
+ "cavium_a063"
"fortville_25g"
],
"Target": [
@@ -2296,5 +2297,20 @@
"Bug ID": "",
"Comments": "the nic not support this case"
}
+ ],
+ "vlan_change_tpid": [
+ {
+ "OS": [
+ "ALL"
+ ],
+ "NIC": [
+ "cavium_a063"
+ ],
+ "Target": [
+ "ALL"
+ ],
+ "Bug ID": "",
+ "Comments": "the nic not support this case"
+ }
]
}
diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py
index 684f68a..1cb1083 100644
--- a/tests/TestSuite_vlan_ethertype_config.py
+++ b/tests/TestSuite_vlan_ethertype_config.py
@@ -198,7 +198,11 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("vlan set strip off %s" %
dutRxPortId, "testpmd> ", 20)
rx_vlans = [1, random_vlan, MAX_VLAN]
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutRxPortId), "testpmd> ")
@@ -226,7 +230,11 @@ class TestVlanEthertypeConfig(TestCase):
dutRxPortId, "testpmd> ", 20)
self.dut.send_expect("start", "testpmd> ")
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutRxPortId), "testpmd> ")
@@ -254,7 +262,11 @@ class TestVlanEthertypeConfig(TestCase):
"vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
self.dut.send_expect("start", "testpmd> ", 20)
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutRxPortId), "testpmd> ")
@@ -279,7 +291,11 @@ class TestVlanEthertypeConfig(TestCase):
dutRxPortId, "testpmd> ", 20)
self.dut.send_expect("start", "testpmd> ")
- tpids = [0x8100, 0xA100]
+ # caium_a063 card support only default '0x8100' tpid in rx mode
+ if self.nic == "cavium_a063":
+ tpids = [0x8100]
+ else:
+ tpids = [0x8100, 0xA100]
for tpid in tpids:
self.dut.send_expect("vlan set outer tpid 0x%x %s" %
(tpid, dutTxPortId), "testpmd> ")
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [dts] [PATCH] tests/TestSuite_vlan_ethertype_config.py: Added condition check to selected "tpids" based on cards.
2019-06-17 8:21 [dts] [PATCH] tests/TestSuite_vlan_ethertype_config.py: Added condition check to selected "tpids" based on cards thaq
@ 2019-06-26 7:08 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-06-26 7:08 UTC (permalink / raw)
To: thaq, dts; +Cc: fmasood, avijay
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of thaq@marvell.com
> Sent: Monday, June 17, 2019 4:21 PM
> To: dts@dpdk.org
> Cc: fmasood@marvell.com; avijay@marvell.com; Thanseerulhaq
> <thaq@marvell.com>
> Subject: [dts] [PATCH] tests/TestSuite_vlan_ethertype_config.py: Added
> condition check to selected "tpids" based on cards.
>
> From: Thanseerulhaq <thaq@marvell.com>
>
> cavium_a063 cards supports only default tpids in rx mode so added
> conditon checks.
> Listing "test_vlan_qinq_tpid" & test_vlan_change_tpid testcase of
> vlan_ethertype_config as invalid for cavium_a063 cards.
>
> Signed-off-by: Thanseerulhaq <thaq@marvell.com>
> ---
> conf/test_case_checklist.json | 16 ++++++++++++++++
> tests/TestSuite_vlan_ethertype_config.py | 24 ++++++++++++++++++++----
> 2 files changed, 36 insertions(+), 4 deletions(-)
>
> diff --git a/conf/test_case_checklist.json b/conf/test_case_checklist.json
> index 7b46bc1..1c4dc6d 100644
> --- a/conf/test_case_checklist.json
> +++ b/conf/test_case_checklist.json
> @@ -2103,6 +2103,7 @@
> "fortville_spirit_single",
> "cavium_a034",
> "cavium_a011",
> + "cavium_a063"
> "fortville_25g"
> ],
> "Target": [
> @@ -2296,5 +2297,20 @@
> "Bug ID": "",
> "Comments": "the nic not support this case"
> }
> + ],
> + "vlan_change_tpid": [
> + {
> + "OS": [
> + "ALL"
> + ],
> + "NIC": [
> + "cavium_a063"
> + ],
> + "Target": [
> + "ALL"
> + ],
> + "Bug ID": "",
> + "Comments": "the nic not support this case"
> + }
> ]
> }
> diff --git a/tests/TestSuite_vlan_ethertype_config.py
> b/tests/TestSuite_vlan_ethertype_config.py
> index 684f68a..1cb1083 100644
> --- a/tests/TestSuite_vlan_ethertype_config.py
> +++ b/tests/TestSuite_vlan_ethertype_config.py
> @@ -198,7 +198,11 @@ class TestVlanEthertypeConfig(TestCase):
> self.dut.send_expect("vlan set strip off %s" %
> dutRxPortId, "testpmd> ", 20)
> rx_vlans = [1, random_vlan, MAX_VLAN]
> - tpids = [0x8100, 0xA100]
> + # caium_a063 card support only default '0x8100' tpid in rx mode
> + if self.nic == "cavium_a063":
> + tpids = [0x8100]
> + else:
> + tpids = [0x8100, 0xA100]
> for tpid in tpids:
> self.dut.send_expect("vlan set outer tpid 0x%x %s" %
> (tpid, dutRxPortId), "testpmd> ") @@ -226,7 +230,11
> @@ class TestVlanEthertypeConfig(TestCase):
> dutRxPortId, "testpmd> ", 20)
> self.dut.send_expect("start", "testpmd> ")
>
> - tpids = [0x8100, 0xA100]
> + # caium_a063 card support only default '0x8100' tpid in rx mode
> + if self.nic == "cavium_a063":
> + tpids = [0x8100]
> + else:
> + tpids = [0x8100, 0xA100]
> for tpid in tpids:
> self.dut.send_expect("vlan set outer tpid 0x%x %s" %
> (tpid, dutRxPortId), "testpmd> ") @@ -254,7 +262,11
> @@ class TestVlanEthertypeConfig(TestCase):
> "vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
> self.dut.send_expect("start", "testpmd> ", 20)
>
> - tpids = [0x8100, 0xA100]
> + # caium_a063 card support only default '0x8100' tpid in rx mode
> + if self.nic == "cavium_a063":
> + tpids = [0x8100]
> + else:
> + tpids = [0x8100, 0xA100]
> for tpid in tpids:
> self.dut.send_expect("vlan set outer tpid 0x%x %s" %
> (tpid, dutRxPortId), "testpmd> ") @@ -279,7 +291,11
> @@ class TestVlanEthertypeConfig(TestCase):
> dutRxPortId, "testpmd> ", 20)
> self.dut.send_expect("start", "testpmd> ")
>
> - tpids = [0x8100, 0xA100]
> + # caium_a063 card support only default '0x8100' tpid in rx mode
> + if self.nic == "cavium_a063":
> + tpids = [0x8100]
> + else:
> + tpids = [0x8100, 0xA100]
> for tpid in tpids:
> self.dut.send_expect("vlan set outer tpid 0x%x %s" %
> (tpid, dutTxPortId), "testpmd> ")
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-26 7:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-17 8:21 [dts] [PATCH] tests/TestSuite_vlan_ethertype_config.py: Added condition check to selected "tpids" based on cards thaq
2019-06-26 7:08 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).