From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v3] test_plans: add case for vm2vm vhost-user/virtio-net larg packet payload check
Date: Wed, 26 Jun 2019 07:23:19 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BAC5105@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20190618202633.102253-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, June 19, 2019 4:27 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v3] test_plans: add case for vm2vm vhost-user/virtio-
> net larg packet payload check
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../vm2vm_virtio_net_perf_test_plan.rst | 98 +++++++++++++------
> 1 file changed, 67 insertions(+), 31 deletions(-)
>
> diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> index 57bba34..77930dc 100644
> --- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> +++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> @@ -8,7 +8,7 @@
> - Redistributions of source code must retain the above copyright
> notice, this list of conditions and the following disclaimer.
>
> - - Redistributions in binary form must reproduce the above copyright
> + - Redistributions in binary forim must reproduce the above copyright
> notice, this list of conditions and the following disclaimer in
> the documentation and/or other materials provided with the
> distribution.
> @@ -32,26 +32,26 @@
>
>
> =====================================
> -vhost-user/virtio-net VM2VM test plan
> +vm2vm vhost-user/virtio-net test plan
> =====================================
>
> Description
> ===========
>
> -Test cases for vhost-user + virtio-net vm2vm tso/tso zero-copy/ufo/tso_ufo
> capability check.
> +The feature enabled the DPDK Vhost TX offload (TSO and UFO). The feature
> added the negotiation between DPDK user space vhost and virtio-net, so we
> will verify the TSO/cksum in the TCP/IP stack enabled environment and
> UFO/cksum in the UDP/IP stack enabled environment with vm2vm vhost-
> user/virtio-net normal path. Also add case to check the payload of large
> packet is valid by scp with vm2vm vhost-user/virtio-net mergeable path test.
>
> Test flow
> =========
>
> Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net
>
> -Test Case 1: vhost-user + virtio-net VM2VM with tcp traffic -
> ===========================================================
> +Test Case 1: VM2VM vhost-user/virtio-net test with tcp traffic
> +==============================================================
>
> 1. Launch the Vhost sample by below commands::
>
> rm -rf vhost-net*
> - ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-
> pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024 --txfreet=992
> + ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem
> + --no-pci --file-prefix=vhost --vdev
> + 'net_vhost0,iface=vhost-net0,queues=1' --vdev
> + 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024
> + --rxd=1024
> testpmd>start
>
> 2. Launch VM1 and VM2::
> @@ -62,7 +62,7 @@ Test Case 1: vhost-user + virtio-net VM2VM with tcp
> traffic
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-1.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
> -chardev socket,id=char0,path=./vhost-net0 -netdev type=vhost-
> user,id=mynet1,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,g
> uest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> -vnc :12 -daemonize
>
> taskset -c 34-35 \
> @@ -71,15 +71,15 @@ Test Case 1: vhost-user + virtio-net VM2VM with tcp
> traffic
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-2.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
> -chardev socket,id=char1,path=./vhost-net1 -netdev type=vhost-
> user,id=mynet2,chardev=char1,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,gso=on,g
> uest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> -vnc :11 -daemonize
>
> -3. On VM1, set virtio device IP and run arp protocol::
> +3. On VM1, set virtio device IP and run arp protocal::
>
> ifconfig ens3 1.1.1.2
> arp -s 1.1.1.8 52:54:00:00:00:02
>
> -4. On VM2, set virtio device IP and run arp protocol::
> +4. On VM2, set virtio device IP and run arp protocal::
>
> ifconfig ens3 1.1.1.8
> arp -s 1.1.1.2 52:54:00:00:00:01
> @@ -95,8 +95,8 @@ Test Case 1: vhost-user + virtio-net VM2VM with tcp
> traffic
> Port 0 should have tx packets above 1522
> Port 1 should have rx packets above 1522
>
> -Test Case 2: vhost-user + virtio-net VM2VM zero-copy with tcp traffic -
> ================================================================
> =====
> +Test Case 2: VM2VM vhost-user/virtio-net zero-copy test with tcp
> +traffic
> +===============================================================
> ========
> +=
>
> 1. Launch the Vhost sample by below commands::
>
> @@ -112,7 +112,7 @@ Test Case 2: vhost-user + virtio-net VM2VM zero-copy
> with tcp traffic
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-1.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
> -chardev socket,id=char0,path=./vhost-net0 -netdev type=vhost-
> user,id=mynet1,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,g
> uest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> -vnc :10 -daemonize
>
> taskset -c 34-35 \
> @@ -121,15 +121,15 @@ Test Case 2: vhost-user + virtio-net VM2VM zero-
> copy with tcp traffic
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-2.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
> -chardev socket,id=char1,path=./vhost-net1 -netdev type=vhost-
> user,id=mynet2,chardev=char1,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,gso=on,g
> uest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
> -vnc :11 -daemonize
>
> -3. On VM1, set virtio device IP and run arp protocol::
> +3. On VM1, set virtio device IP and run arp protocal::
>
> ifconfig ens3 1.1.1.2
> arp -s 1.1.1.8 52:54:00:00:00:02
>
> -4. On VM2, set virtio device IP and run arp protocol::
> +4. On VM2, set virtio device IP and run arp protocal::
>
> ifconfig ens3 1.1.1.8
> arp -s 1.1.1.2 52:54:00:00:00:01
> @@ -145,13 +145,12 @@ Test Case 2: vhost-user + virtio-net VM2VM zero-
> copy with tcp traffic
> Port 0 should have tx packets above 1522
> Port 1 should have rx packets above 1522
>
> -Test Case 3: vhost-user + virtio-net VM2VM with udp traffic -
> ===========================================================
> -
> +Test Case 3: VM2VM vhost-user/virtio-net test with udp traffic
> +==============================================================
> 1. Launch the Vhost sample by below commands::
>
> rm -rf vhost-net*
> - testpmd>./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-
> mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-
> cores=1 --txd=1024 --rxd=1024 --txfreet=992
> + testpmd>./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048
> + --legacy-mem --no-pci --file-prefix=vhost --vdev
> + 'net_vhost0,iface=vhost-net0,queues=1' --vdev
> + 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024
> + --rxd=1024
> testpmd>start
>
> 2. Launch VM1 and VM2::
> @@ -162,8 +161,7 @@ Test Case 3: vhost-user + virtio-net VM2VM with udp
> traffic
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-1.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
> -chardev socket,id=char0,path=./vhost-net0 -netdev type=vhost-
> user,id=mynet1,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=o
> n \
> - -vnc :10 -daemonize
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,csum=
> +
> on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,
> + host_ufo=on -vnc :10 -daemonize
>
> taskset -c 34-35 \
> qemu-system-x86_64 -name us-vhost-vm2 \ @@ -171,15 +169,14 @@
> Test Case 3: vhost-user + virtio-net VM2VM with udp traffic
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-2.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
> -chardev socket,id=char1,path=./vhost-net1 -netdev type=vhost-
> user,id=mynet2,chardev=char1,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=o
> n \
> - -vnc :11 -daemonize
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=
> +
> on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,
> + host_ufo=on -vnc :11 -daemonize
>
> -3. On VM1, set virtio device IP and run arp protocol::
> +3. On VM1, set virtio device IP and run arp protocal::
>
> ifconfig ens3 1.1.1.2
> arp -s 1.1.1.8 52:54:00:00:00:02
>
> -4. On VM2, set virtio device IP and run arp protocol::
> +4. On VM2, set virtio device IP and run arp protocal::
>
> ifconfig ens3 1.1.1.8
> arp -s 1.1.1.2 52:54:00:00:00:01
> @@ -202,7 +199,7 @@ Test Case 4: Check virtio-net device capability 1.
> Launch the Vhost sample by below commands::
>
> rm -rf vhost-net*
> - testpmd>./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-
> mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-
> cores=1 --txd=1024 --rxd=1024 --txfreet=992
> + testpmd>./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048
> + --legacy-mem --no-pci --file-prefix=vhost --vdev
> + 'net_vhost0,iface=vhost-net0,queues=1' --vdev
> + 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024
> + --rxd=1024
> testpmd>start
>
> 2. Launch VM1 and VM2,set TSO and UFO on in qemu command::
> @@ -213,8 +210,7 @@ Test Case 4: Check virtio-net device capability
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-1.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
> -chardev socket,id=char0,path=./vhost-net0 -netdev type=vhost-
> user,id=mynet1,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=o
> n \
> - -vnc :10 -daemonize
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,csum=
> +
> on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,
> + host_ufo=on -vnc :10 -daemonize
>
> taskset -c 34-35 \
> qemu-system-x86_64 -name us-vhost-vm2 \ @@ -222,8 +218,7 @@ Test
> Case 4: Check virtio-net device capability
> -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-2.img \
> -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
> -chardev socket,id=char1,path=./vhost-net1 -netdev type=vhost-
> user,id=mynet2,chardev=char1,vhostforce \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=o
> n \
> - -vnc :11 -daemonize
> + -device
> + virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=
> +
> on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,
> + host_ufo=on -vnc :11 -daemonize
>
> 3. Check UFO and TSO offload status on for the Virtio-net driver on VM1 and
> VM2::
>
> @@ -238,3 +233,44 @@ Test Case 4: Check virtio-net device capability
> tx-tcp-segmentation: on
> tx-tcp-ecn-segmentation: on
> tx-tcp6-segmentation: on
> +
> +Test Case 5: VM2VM vhost-user/virtio-net test with large packet payload
> +valid check
> +===============================================================
> ========
> +============
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-
> pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --
> rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + qemu-system-x86_64 -name us-vhost-vm1 \
> + -cpu host -enable-kvm -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa
> node,memdev=mem -mem-prealloc \
> + -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-1.img \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 -netdev type=vhost-
> user,id=mynet1,chardev=char0,vhostforce \
> + -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on \
> + -vnc :12 -daemonize
> +
> + qemu-system-x86_64 -name us-vhost-vm2 \
> + -cpu host -enable-kvm -m 2048 -object memory-backend-
> file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa
> node,memdev=mem -mem-prealloc \
> + -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16-2.img \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net
> user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
> + -chardev socket,id=char1,path=./vhost-net1 -netdev type=vhost-
> user,id=mynet2,chardev=char1,vhostforce \
> + -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on \
> + -vnc :11 -daemonize
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Scp 64KB file form VM1 to VM2::
> +
> + Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
> \ No newline at end of file
> --
> 2.17.1
prev parent reply other threads:[~2019-06-26 7:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-18 20:26 Yinan
2019-06-26 7:23 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BAC5105@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).