From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "thaq@marvell.com" <thaq@marvell.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "fmasood@marvell.com" <fmasood@marvell.com>,
"avijay@marvell.com" <avijay@marvell.com>
Subject: Re: [dts] [PATCH] tests/TestSuite_ipgre.py: Modified ipgre-GRE_packet_chksum_offload testcase to Uncheck sctp chksum if nic-card is cavium_a063. Setting send packet count as 4 to support Vector mode.
Date: Wed, 26 Jun 2019 08:41:22 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BAC533C@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1560868593-853-1-git-send-email-thaq@marvell.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of thaq@marvell.com
> Sent: Tuesday, June 18, 2019 10:37 PM
> To: dts@dpdk.org
> Cc: fmasood@marvell.com; avijay@marvell.com; Thanseerulhaq
> <thaq@marvell.com>
> Subject: [dts] [PATCH] tests/TestSuite_ipgre.py: Modified ipgre-
> GRE_packet_chksum_offload testcase to Uncheck sctp chksum if nic-card is
> cavium_a063. Setting send packet count as 4 to support Vector mode.
>
> From: Thanseerulhaq <thaq@marvell.com>
>
> Signed-off-by: Thanseerulhaq <thaq@marvell.com>
> ---
> tests/TestSuite_ipgre.py | 51 ++++++++++++++++++++++++------------------------
> 1 file changed, 26 insertions(+), 25 deletions(-)
>
> diff --git a/tests/TestSuite_ipgre.py b/tests/TestSuite_ipgre.py index
> f188df0..de366b0 100644
> --- a/tests/TestSuite_ipgre.py
> +++ b/tests/TestSuite_ipgre.py
> @@ -99,7 +99,7 @@ class TestIpgre(TestCase):
> for layer in layer_configs.keys():
> pkt.config_layer(layer, layer_configs[layer])
> inst = self.tester.tcpdump_sniff_packets(self.tester_iface, count=1,
> timeout=8)
> - pkt.send_pkt(tx_port=self.tester_iface)
> + pkt.send_pkt(tx_port=self.tester_iface, count = 4)
> out = self.dut.get_session_output(timeout=2)
> time.sleep(1)
> self.tester.load_tcpdump_sniff_packets(inst)
> @@ -315,7 +315,8 @@ class TestIpgre(TestCase):
> self.dut.send_expect("port stop all", "testpmd>")
> self.dut.send_expect("csum set ip hw 0", "testpmd>")
> self.dut.send_expect("csum set udp hw 0", "testpmd>")
> - self.dut.send_expect("csum set sctp hw 0", "testpmd>")
> + if self.nic != "cavium_a063":
> + self.dut.send_expect("csum set sctp hw 0", "testpmd>")
> self.dut.send_expect("csum set outer-ip hw 0", "testpmd>")
> self.dut.send_expect("csum set tcp hw 0", "testpmd>")
> self.dut.send_expect("csum parse-tunnel on 0", "testpmd>") @@ -
> 407,29 +408,29 @@ class TestIpgre(TestCase):
> 'udp': {'chksum': 0xffff}}
> self.check_packet_transmission(pkt_types, config_layers)
> self.compare_checksum()
> -
> - # Send packet with wrong inner SCTP checksum and check forwarded
> packet SCTP checksum is correct
> - pkt_types = { "MAC_IP_GRE_IPv4-TUNNEL_SCTP_PKT":
> ["PKT_TX_SCTP_CKSUM"]}
> - config_layers = {'ether': {'src': self.outer_mac_src,
> - 'dst': self.outer_mac_dst},
> - 'ipv4': {'proto': 'gre',
> - 'src': self.outer_ip_src,
> - 'dst': self.outer_ip_dst},
> - 'inner_ipv4':{'src':self.inner_ip_src,
> - 'dst':self.inner_ip_dst},
> - 'sctp': {'src': 53,
> - 'dst': 53}}
> - self.save_ref_packet(pkt_types, config_layers)
> - config_layers = {'ether': {'src': self.outer_mac_src,
> - 'dst': self.outer_mac_dst},
> - 'ipv4': {'proto': 'gre',
> - 'src': self.outer_ip_src,
> - 'dst': self.outer_ip_dst},
> - 'inner_ipv4':{'src':self.inner_ip_src,
> - 'dst':self.inner_ip_dst},
> - 'sctp': {'chksum': 0x0}}
> - self.check_packet_transmission(pkt_types, config_layers)
> - self.compare_checksum()
> + if self.nic != "cavium_a063":
> + # Send packet with wrong inner SCTP checksum and check forwarded
> packet SCTP checksum is correct
> + pkt_types = { "MAC_IP_GRE_IPv4-TUNNEL_SCTP_PKT":
> ["PKT_TX_SCTP_CKSUM"]}
> + config_layers = {'ether': {'src': self.outer_mac_src,
> + 'dst': self.outer_mac_dst},
> + 'ipv4': {'proto': 'gre',
> + 'src': self.outer_ip_src,
> + 'dst': self.outer_ip_dst},
> + 'inner_ipv4':{'src':self.inner_ip_src,
> + 'dst':self.inner_ip_dst},
> + 'sctp': {'src': 53,
> + 'dst': 53}}
> + self.save_ref_packet(pkt_types, config_layers)
> + config_layers = {'ether': {'src': self.outer_mac_src,
> + 'dst': self.outer_mac_dst},
> + 'ipv4': {'proto': 'gre',
> + 'src': self.outer_ip_src,
> + 'dst': self.outer_ip_dst},
> + 'inner_ipv4':{'src':self.inner_ip_src,
> + 'dst':self.inner_ip_dst},
> + 'sctp': {'chksum': 0x0}}
> + self.check_packet_transmission(pkt_types, config_layers)
> + self.compare_checksum()
>
> self.dut.send_expect("quit", "#")
>
> --
> 1.8.3.1
prev parent reply other threads:[~2019-06-26 8:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-18 14:36 thaq
2019-06-26 8:41 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BAC533C@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=avijay@marvell.com \
--cc=dts@dpdk.org \
--cc=fmasood@marvell.com \
--cc=thaq@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).