From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Ma, LihongX" <lihongx.ma@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>,
"Ma, LihongX" <lihongx.ma@intel.com>
Subject: Re: [dts] [patch V1] tests: add testsuite virtio user as exceptional path
Date: Wed, 10 Jul 2019 06:06:58 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BADEA22@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1562190182-24422-1-git-send-email-lihongx.ma@intel.com>
I am confused, your goal is to test virtio_user_as_exceptional_path, but you want to use GRO configuration file.
If I am not very familiar with your script, it's very easy to misunderstand it.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Thursday, July 4, 2019 5:43 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts] [patch V1] tests: add testsuite virtio user as exceptional path
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> tests/TestSuite_virtio_user_as_exceptional_path.py | 244
> +++++++++++++++++++++
> 1 file changed, 244 insertions(+)
> create mode 100644 tests/TestSuite_virtio_user_as_exceptional_path.py
>
> diff --git a/tests/TestSuite_virtio_user_as_exceptional_path.py
> b/tests/TestSuite_virtio_user_as_exceptional_path.py
> new file mode 100644
> index 0000000..84e17aa
> --- /dev/null
> +++ b/tests/TestSuite_virtio_user_as_exceptional_path.py
> @@ -0,0 +1,244 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Vhost exception path test suite.
> +"""
> +import re
> +import time
> +import utils
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from config import UserConf
> +
> +
> +class TestVhostExceptionPath(TestCase):
> +
> + def set_up_all(self):
> + # Get and verify the ports
> + self.dut_ports = self.dut.get_ports()
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
> + # Get the port's socket and get the core for testpmd
> + self.pf = self.dut_ports[0]
> + netdev = self.dut.ports_info[self.pf]['port']
> + self.socket = netdev.get_nic_socket()
> + self.cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
> + self.virtio_ip1 = "1.1.1.2"
> + self.virtio_mac1 = "52:54:00:00:00:01"
> + self.memory_channel = self.dut.get_memory_channels()
> + config = UserConf('conf/vhost_gro.cfg')
> + conf = config.conf
> + section = config.get_sections()
> + self.verify('peerconf' in section,
> + 'Pls config peer info about intf in conf file vhost_gro.cfg')
> + params = conf._sections['peerconf']
> + self.pci = params['pci']
> + self.pci_drv = params['pci_drv']
> + self.peer_pci = params['peer']
> + self.nic_in_kernel = params['peer_intf']
> +
> + for i in self.dut_ports:
> + port = self.dut.ports_info[i]['port']
> + port.bind_driver()
> + self.dut.send_expect(
> + "./usertools/dpdk-devbind.py -b igb_uio %s" %
> + self.pci, '#', 30)
> +
> + # set diff arg about mem_socket base on socket number
> + if len(set([int(core['socket']) for core in self.dut.cores])) == 1:
> + self.socket_mem = '1024'
> + else:
> + self.socket_mem = '1024,1024'
> +
> + self.prepare_dpdk()
> +
> + def set_up(self):
> + #
> + # Run before each test case.
> + #
> + # Clean the execution ENV
> + self.dut.send_expect("rm -rf ./vhost-net*", "#")
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> + self.dut.send_expect("modprobe vhost-net", "#")
> +
> + def launch_testpmd_exception_path(self):
> + self.testcmd = self.target + "/app/testpmd -c %s -n %d --socket-mem %s
> --legacy-mem" \
> + + " --vdev=virtio_user0,mac=%s,path=/dev/vhost-
> net,queue_size=1024 -- -i" \
> + + " --rxd=1024 --txd=1024"
> + self.coremask = utils.create_mask(self.cores)
> + self.testcmd_start = self.testcmd % (self.coremask,
> self.memory_channel,
> + self.socket_mem, self.virtio_mac1)
> + self.vhost_user = self.dut.new_session(suite="user")
> + self.vhost_user.send_expect("modprobe vhost-net", "#", 120)
> + self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
> + self.vhost_user.send_expect("set fwd csum", "testpmd> ", 120)
> + self.vhost_user.send_expect("stop", "testpmd> ", 120)
> + self.vhost_user.send_expect("port stop 0", "testpmd> ", 120)
> + self.vhost_user.send_expect("port stop 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("port config 0 tx_offload tcp_cksum on",
> "testpmd> ", 120)
> + self.vhost_user.send_expect("port config 0 tx_offload ipv4_cksum on",
> "testpmd> ", 120)
> + self.vhost_user.send_expect("csum set ip sw 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("csum set tcp hw 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("csum set ip hw 0", "testpmd> ", 120)
> + self.vhost_user.send_expect("csum set tcp hw 0", "testpmd> ", 120)
> + self.vhost_user.send_expect("tso set 1448 0", "testpmd> ", 120)
> + self.vhost_user.send_expect("port start 0", "testpmd> ", 120)
> + self.vhost_user.send_expect("port start 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + def prepare_tap_device(self):
> + self.dut.send_expect("ifconfig tap0 up", "#")
> + self.dut.send_expect("ifconfig tap0 1.1.1.2", "#")
> +
> + def testpmd_reset(self):
> + self.vhost_user.send_expect("stop", "testpmd> ", 120)
> + self.vhost_user.send_expect("port stop 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("csum set ip sw 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("port start 1", "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + def config_kernel_nic_host(self):
> + #
> + self.dut.send_expect("ip netns del ns1", "#")
> + self.dut.send_expect("ip netns add ns1", "#")
> + self.dut.send_expect("ip link set %s netns ns1" % self.nic_in_kernel, "#")
> + self.dut.send_expect("ip netns exec ns1 ifconfig %s 1.1.1.8 up" %
> self.nic_in_kernel, "#")
> + self.dut.send_expect("ip netns exec ns1 ethtool -K %s gro on" %
> self.nic_in_kernel, "#")
> + self.dut.send_expect("ip netns exec ns1 ethtool -K %s tso on" %
> + self.nic_in_kernel, "#")
> +
> + def prepare_dpdk(self):
> + #
> + # Changhe the testpmd checksum fwd code for mac change
> + self.dut.send_expect(
> + "cp ./app/test-pmd/csumonly.c ./app/test-pmd/csumonly_backup.c",
> + "#")
> + self.dut.send_expect(
> + "sed -i '/ether_addr_copy(&peer_eth/i\#if 0' ./app/test-
> pmd/csumonly.c", "#")
> + self.dut.send_expect(
> + "sed -i '/parse_ethernet(eth_hdr, &info/i\#endif' ./app/test-
> pmd/csumonly.c", "#")
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + def unprepare_dpdk(self):
> + # Recovery the DPDK code to original
> + self.dut.send_expect(
> + "cp ./app/test-pmd/csumonly_backup.c ./app/test-pmd/csumonly.c
> ",
> + "#")
> + self.dut.send_expect("rm -rf ./app/test-pmd/csumonly_backup.c", "#")
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + def iperf_result_verify(self, vm_client):
> + '''
> + Get the iperf test result
> + '''
> + fmsg = vm_client.send_expect("cat /root/iperf_client.log", "#")
> + print fmsg
> + iperfdata = re.compile('[\d+]*.[\d+]* [M|G]bits/sec').findall(fmsg)
> + print iperfdata
> + self.verify(iperfdata, 'There no data about this case')
> + self.result_table_create(['Data', 'Unit'])
> + results_row = ['exception path']
> + results_row.append(iperfdata[-1])
> + self.result_table_add(results_row)
> + self.result_table_print()
> + self.output_result = "Iperf throughput is %s" % iperfdata[-1]
> + self.logger.info(self.output_result)
> +
> + def test_vhost_exception_path_TAP_original(self):
> + self.config_kernel_nic_host()
> + self.launch_testpmd_exception_path()
> + self.dut.get_session_output(timeout=2)
> + time.sleep(5)
> + # Get the virtio-net device name
> + self.prepare_tap_device()
> + self.testpmd_reset()
> + self.dut.send_expect('ip netns exec ns1 iperf -s -i 1', '', 10)
> + self.iperf = self.dut.new_session(suite="iperf")
> + self.iperf.send_expect('rm /root/iperf_client.log', '#', 10)
> + self.iperf.send_expect('iperf -c 1.1.1.8 -i 1 -t 10 > /root/iperf_client.log
> &', '', 180)
> + time.sleep(30)
> + self.dut.send_expect('^C', '#', 10)
> + self.iperf_result_verify(self.iperf)
> + self.logger.info("TAP->virtio-user->Kernel_NIC %s " %
> (self.output_result))
> + self.iperf.send_expect('rm /root/iperf_client.log', '#', 10)
> + self.vhost_user.send_expect("quit", "#", 120)
> + self.dut.close_session(self.vhost_user)
> + self.dut.send_expect("ip netns del ns1", "#")
> + self.dut.close_session(self.iperf)
> +
> + def test_vhost_exception_path_NIC_original(self):
> + self.config_kernel_nic_host()
> + self.launch_testpmd_exception_path()
> + time.sleep(5)
> + self.dut.get_session_output(timeout=2)
> + self.prepare_tap_device()
> + self.testpmd_reset()
> + self.iperf = self.dut.new_session(suite="iperf")
> + self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> + self.iperf.send_expect('iperf -s -i 1', '', 180)
> + self.dut.send_expect('ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 10 >
> /root/iperf_client.log &', '', 10)
> + time.sleep(30)
> + self.iperf.send_expect('^C', '#', 10)
> + self.iperf_result_verify(self.dut)
> + self.dut.get_session_output(timeout=2)
> + self.logger.info("Kernel_NIC<-virtio-user<-TAP %s " %
> (self.output_result))
> + self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> + self.vhost_user.send_expect("quit", "#", 120)
> + self.dut.close_session(self.vhost_user)
> + self.dut.send_expect("ip netns del ns1", "#")
> + self.dut.close_session(self.iperf)
> +
> + def tear_down(self):
> + #
> + # Run after each test case.
> + #
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> + self.dut.send_expect("rm -rf ./vhost-net", "#")
> + time.sleep(2)
> + self.dut.send_expect(
> + "./usertools/dpdk-devbind.py -u %s" % (self.peer_pci), '# ', 30)
> + self.dut.send_expect(
> + "./usertools/dpdk-devbind.py -b %s %s" %
> + (self.pci_drv, self.peer_pci), '# ', 30)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.unprepare_dpdk()
> + self.dut.send_expect(
> + "./usertools/dpdk-devbind.py -u %s" % (self.pci), '# ', 30)
> + self.dut.send_expect(
> + "./usertools/dpdk-devbind.py -b %s %s" %
> + (self.pci_drv, self.pci), '# ', 30)
> --
> 2.7.4
prev parent reply other threads:[~2019-07-10 6:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-03 21:43 lihong
2019-07-04 6:02 ` Wang, Yinan
2019-07-04 6:37 ` Ma, LihongX
2019-07-10 6:06 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BADEA22@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=lihongx.ma@intel.com \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).