From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Peng, Yuan" <yuan.peng@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Peng, Yuan" <yuan.peng@intel.com>
Subject: Re: [dts] [PATCH] tests: remove a test case from TestSuite_vlan.py
Date: Wed, 10 Jul 2019 06:30:44 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BADEBE0@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1561544136-73369-1-git-send-email-yuan.peng@intel.com>
Applying: tests: remove a test case from TestSuite_vlan.py
error: patch failed: tests/TestSuite_vlan.py:73
error: tests/TestSuite_vlan.py: patch does not apply
Patch failed at 0001 tests: remove a test case from TestSuite_vlan.py
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Peng Yuan
> Sent: Wednesday, June 26, 2019 6:16 PM
> To: dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: [dts] [PATCH] tests: remove a test case from TestSuite_vlan.py
>
> Remove a test case from TestSuite_vlan.py
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
>
> diff --git a/tests/TestSuite_vlan.py b/tests/TestSuite_vlan.py index
> 4bf0ae8..421efc6 100644
> --- a/tests/TestSuite_vlan.py
> +++ b/tests/TestSuite_vlan.py
> @@ -73,14 +73,10 @@ class TestVlan(TestCase):
> self.pmdout.start_testpmd("Default", "--portmask=%s --port-
> topology=loop" % portMask)
>
> self.dut.send_expect("set verbose 1", "testpmd> ")
> - out = self.dut.send_expect("set fwd mac", "testpmd> ")
> -
> - if self.nic in ["fortville_eagle", "fortville_spirit", "fortville_spirit_single",
> "fortpark_TLV", "fortville_25g"]:
> - self.dut.send_expect("vlan set filter on %s" % dutRxPortId, "testpmd>
> ")
> - self.dut.send_expect("set promisc all off", "testpmd> ")
> -
> + self.dut.send_expect("set fwd mac", "testpmd> ")
> + self.dut.send_expect("set promisc all off", "testpmd> ")
> + self.dut.send_expect("vlan set filter on %s" % dutRxPortId,
> + "testpmd> ")
> self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ")
> - self.verify('Set mac packet forwarding mode' in out, "set fwd rxonly
> error")
> self.vlan = 51
>
> if self.kdriver == "fm10k":
> @@ -97,7 +93,7 @@ class TestVlan(TestCase):
>
> def vlan_send_packet(self, vid, num=1):
> """
> - Send $num of packet to portid, if vid is -1, it means send pakcage not
> include vlan id.
> + Send $num of packets to portid, if vid is -1, it means send a packet
> which does not include a vlan id.
> """
> # The package stream : testTxPort->dutRxPort->dutTxport->testRxPort
> port = self.tester.get_local_port(dutRxPortId)
> @@ -128,9 +124,9 @@ class TestVlan(TestCase):
> """
> pass
>
> - def test_vlan_enable_receipt(self):
> + def test_vlan_enable_receipt_strip_off(self):
> """
> - Enable receipt of VLAN packets
> + Enable receipt of VLAN packets and strip off
> """
>
> if self.kdriver == "fm10k":
> @@ -140,18 +136,24 @@ class TestVlan(TestCase):
> self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ")
> self.dut.send_expect("start", "testpmd> ", 120)
> out = self.dut.send_expect("show port info %s" % dutRxPortId,
> "testpmd> ", 20)
> + self.verify("strip off" in out, "Wrong strip:" + out)
>
> self.vlan_send_packet(self.vlan)
> out = self.get_tcpdump_package()
> self.verify(self.vlan in out, "Wrong vlan:" + str(out))
>
> + notmatch_vlan = self.vlan + 1
> + self.vlan_send_packet(notmatch_vlan)
> + out = self.get_tcpdump_package()
> + self.verify(len(out) == 0, "Received unexpected packet, filter not
> work!!!")
> + self.verify(notmatch_vlan not in out, "Wrong vlan:" + str(out))
> +
> self.dut.send_expect("stop", "testpmd> ")
>
> def test_vlan_disable_receipt(self):
> """
> Disable receipt of VLAN packets
> """
> - self.dut.send_expect("vlan set filter on %s" % dutRxPortId, "testpmd> ")
>
> self.dut.send_expect("rx_vlan rm %d %s" % (self.vlan, dutRxPortId),
> "testpmd> ")
> self.dut.send_expect("start", "testpmd> ", 120) @@ -161,9 +163,12 @@
> class TestVlan(TestCase):
> self.verify(len(out) == 0, "Received unexpected packet, filter not
> work!!!")
> self.verify(self.vlan not in out, "Wrong vlan:" + str(out))
>
> - out = self.dut.send_expect("stop", "testpmd> ")
> + self.dut.send_expect("stop", "testpmd> ")
>
> - def test_vlan_strip_config_on(self):
> + def test_vlan_enable_receipt_strip_on(self):
> + """
> + Enable receipt of VLAN packets and strip on
> + """
>
> self.dut.send_expect("vlan set strip on %s" % dutRxPortId, "testpmd> ",
> 20)
> self.dut.send_expect("rx_vlan add %d %s" % (self.vlan, dutRxPortId),
> "testpmd> ", 20) @@ -175,23 +180,8 @@ class TestVlan(TestCase):
> out = self.get_tcpdump_package()
> self.verify(len(out), "Forwarded vlan packet not received!!!")
> self.verify(self.vlan not in out, "Wrong vlan:" + str(out))
> - out = self.dut.send_expect("stop", "testpmd> ", 120)
> -
> - def test_vlan_strip_config_off(self):
> -
> - if self.kdriver == "fm10k":
> - print utils.RED("fm10k not support this case\n")
> - return
> + self.dut.send_expect("stop", "testpmd> ", 120)
> self.dut.send_expect("vlan set strip off %s" % dutRxPortId, "testpmd> ",
> 20)
> - self.dut.send_expect("rx_vlan add %d %s" % (self.vlan, dutRxPortId),
> "testpmd> ", 20)
> - out = self.dut.send_expect("show port info %s" % dutRxPortId,
> "testpmd> ", 20)
> - self.verify("strip off" in out, "Wrong strip:" + out)
> - self.dut.send_expect("set nbport 2", "testpmd> ")
> - self.dut.send_expect("start", "testpmd> ", 120)
> - self.vlan_send_packet(self.vlan)
> - out = self.get_tcpdump_package()
> - self.verify(self.vlan in out, "Vlan not found:" + str(out))
> - out = self.dut.send_expect("stop", "testpmd> ", 120)
>
> def test_vlan_enable_vlan_insertion(self):
> """
> @@ -202,10 +192,6 @@ class TestVlan(TestCase):
> netobj.add_vlan(vlan_id = self.vlan)
> netobj.add_txvlan(vlan_id = self.vlan)
>
> - port = self.tester.get_local_port(dutTxPortId)
> - intf = self.tester.get_interface(port)
> -
> - self.dut.send_expect("set nbport 2", "testpmd> ")
> self.dut.send_expect("stop", "testpmd> ")
> self.dut.send_expect("port stop all", "testpmd> ")
> self.dut.send_expect("tx_vlan set %s %d" % (dutTxPortId, self.vlan),
> "testpmd> ")
> --
> 2.14.3
prev parent reply other threads:[~2019-07-10 6:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 10:15 Peng Yuan
2019-07-10 6:30 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BADEBE0@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).