From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Ma, LihongX" <lihongx.ma@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>,
"Ma, LihongX" <lihongx.ma@intel.com>
Subject: Re: [dts] [PATCH V2] tests: add testsuite pvp virtio user 2M hugepages
Date: Wed, 10 Jul 2019 06:31:13 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BADEBF7@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1561592048-2504-1-git-send-email-lihongx.ma@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Thursday, June 27, 2019 7:34 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts] [PATCH V2] tests: add testsuite pvp virtio user 2M hugepages
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> tests/TestSuite_pvp_virtio_user_2M_hugepages.py | 180
> ++++++++++++++++++++++++
> 1 file changed, 180 insertions(+)
> create mode 100644 tests/TestSuite_pvp_virtio_user_2M_hugepages.py
>
> diff --git a/tests/TestSuite_pvp_virtio_user_2M_hugepages.py
> b/tests/TestSuite_pvp_virtio_user_2M_hugepages.py
> new file mode 100644
> index 0000000..56f285a
> --- /dev/null
> +++ b/tests/TestSuite_pvp_virtio_user_2M_hugepages.py
> @@ -0,0 +1,180 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +vhost/virtio-user pvp with 2M hugepage.
> +"""
> +
> +import utils
> +import time
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from pktgen import PacketGeneratorHelper
> +
> +
> +class TestPVPVirtioWith2Mhuge(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + hugepages_size = self.dut.send_expect("awk '/Hugepagesize/ {print $2}'
> /proc/meminfo", "# ")
> + self.verify(int(hugepages_size) == 2048, "Please config you
> hugepages_size to 2048")
> + self.core_config = "1S/4C/1T"
> + self.dut_ports = self.dut.get_ports()
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cores_num = len([n for n in self.dut.cores if int(n['socket']) ==
> + self.ports_socket])
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
> + self.verify(self.cores_num >= 4,
> + "There has not enought cores to test this suite %s" %
> + self.suite_name)
> +
> + self.core_list = self.dut.get_core_list(
> + self.core_config, socket=self.ports_socket)
> + self.core_list_virtio_user = self.core_list[0:2]
> + self.core_list_vhost_user = self.core_list[2:4]
> + self.core_mask_virtio_user =
> utils.create_mask(self.core_list_virtio_user)
> + self.core_mask_vhost_user =
> utils.create_mask(self.core_list_vhost_user)
> + self.mem_channels = self.dut.get_memory_channels()
> + self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
> + self.header_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] +
> HEADER_SIZE['tcp']
> + self.frame_sizes = [64, 128, 256, 512, 1024, 1518]
> + self.logger.info("You can config packet_size in file %s.cfg," %
> self.suite_name + \
> + " in region 'suite' like packet_sizes=[64, 128, 256]")
> + if 'packet_sizes' in self.get_suite_cfg():
> + self.frame_sizes = self.get_suite_cfg()['packet_sizes']
> + # create an instance to set stream field setting
> + self.pktgen_helper = PacketGeneratorHelper()
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + self.dut.send_expect("rm -rf ./vhost-net*", "# ")
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.vhost_user = self.dut.new_session(suite="vhost-user")
> + self.virtio_user = self.dut.new_session(suite="virtio-user")
> + # Prepare the result table
> + self.table_header = ['Frame']
> + self.table_header.append("Mode")
> + self.table_header.append("Mpps")
> + self.table_header.append("Queue Num")
> + self.table_header.append("% linerate")
> + self.result_table_create(self.table_header)
> +
> + def send_and_verify(self):
> + """
> + Send packet with packet generator and verify
> + """
> + for frame_size in self.frame_sizes:
> + payload_size = frame_size - self.header_size
> + tgen_input = []
> + rx_port = self.tester.get_local_port(self.dut_ports[0])
> + tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.tester.scapy_append(
> + 'wrpcap("vhost.pcap", [Ether(dst="%s")/IP()/TCP()/("X"*%d)])' %
> + (self.dst_mac, payload_size))
> + tgen_input.append((tx_port, rx_port, "vhost.pcap"))
> +
> + self.tester.scapy_execute()
> + self.tester.pktgen.clear_streams()
> + streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100,
> + None, self.tester.pktgen)
> + _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
> + Mpps = pps / 1000000.0
> + self.verify(Mpps > 0, "%s can not receive packets" %
> (self.running_case))
> + throughput = Mpps * 100 / \
> + float(self.wirespeed(self.nic, 64, 1))
> +
> + results_row = [frame_size]
> + results_row.append("2M Hugepages")
> + results_row.append(Mpps)
> + results_row.append("1")
> + results_row.append(throughput)
> + self.result_table_add(results_row)
> +
> + def start_testpmd_as_vhost(self):
> + """
> + start testpmd on vhost
> + """
> + command_line_client = "%s/app/testpmd -c %s -n %d " + \
> + "--socket-mem 1024,1024 --file-prefix=vhost " + \
> + "--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i"
> + command_line_client = command_line_client % (self.target,
> + self.core_mask_vhost_user, self.mem_channels)
> + self.vhost_user.send_expect(command_line_client, "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + def start_testpmd_as_virtio(self):
> + """
> + start testpmd on virtio
> + """
> + command_line_user = "./%s/app/testpmd -n %d -c %s " + \
> + "--no-pci --socket-mem 1024,1024 " + \
> + "--file-prefix=virtio-user --single-file-segments " + \
> + "--
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1 -- -
> i"
> + command_line_user = command_line_user % (self.target,
> + self.mem_channels, self.core_mask_virtio_user)
> + self.virtio_user.send_expect(command_line_user, "testpmd> ", 120)
> + self.virtio_user.send_expect("start", "testpmd> ", 120)
> +
> + def close_all_apps(self):
> + """
> + close testpmd and vhost-switch
> + """
> + self.virtio_user.send_expect("quit", "# ", 60)
> + self.vhost_user.send_expect("quit", "# ", 60)
> + self.dut.close_session(self.vhost_user)
> + self.dut.close_session(self.virtio_user)
> +
> + def test_perf_pvp_virtio_user_with_2M_hugepages(self):
> + """
> + Basic test for virtio-user 2M hugepage
> + """
> + self.start_testpmd_as_vhost()
> + self.start_testpmd_as_virtio()
> + self.send_and_verify()
> + self.result_table_print()
> + self.close_all_apps()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> --
> 2.7.4
prev parent reply other threads:[~2019-07-10 6:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 23:34 lihong
2019-06-27 8:24 ` Wang, Yinan
2019-07-02 7:30 ` Ma, LihongX
2019-07-10 6:31 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BADEBF7@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=lihongx.ma@intel.com \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).