From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Ma, LihongX" <lihongx.ma@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>,
"Ma, LihongX" <lihongx.ma@intel.com>
Subject: Re: [dts] [PATCH V2 2/2][virtio container] tests: add testsuite virtio user for container
Date: Wed, 10 Jul 2019 07:19:05 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BADECEE@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1561592326-2619-2-git-send-email-lihongx.ma@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Thursday, June 27, 2019 7:39 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts] [PATCH V2 2/2][virtio container] tests: add testsuite virtio user
> for container
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> ...stSuite_virtio_user_for_container_networking.py | 210
> +++++++++++++++++++++
> 1 file changed, 210 insertions(+)
> create mode 100644
> tests/TestSuite_virtio_user_for_container_networking.py
>
> diff --git a/tests/TestSuite_virtio_user_for_container_networking.py
> b/tests/TestSuite_virtio_user_for_container_networking.py
> new file mode 100644
> index 0000000..c914a88
> --- /dev/null
> +++ b/tests/TestSuite_virtio_user_for_container_networking.py
> @@ -0,0 +1,210 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +Virtio user for container networking
> +"""
> +
> +import utils
> +import time
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from pktgen import PacketGeneratorHelper
> +
> +
> +class TestVirtioUserForContainer(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.frame_sizes = [64, 128, 256, 512, 1024, 1518]
> + self.queue_number = 1
> + self.nb_cores = 1
> + self.dut_ports = self.dut.get_ports()
> + self.mem_channels = self.dut.get_memory_channels()
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cores_num = len([n for n in self.dut.cores if int(n['socket']) ==
> + self.ports_socket])
> + self.verify(len(self.dut_ports) >= 1, 'Insufficient ports for testing')
> + self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] +
> + HEADER_SIZE['udp']
> +
> + self.verify('docker_image' in self.get_suite_cfg(),
> + 'Pls config docker image in the conf %s' % self.suite_name)
> + self.docker_image = self.get_suite_cfg()['docker_image']
> + self.container_base_dir = self.dut.base_dir
> + self.container_base_dir = self.container_base_dir.replace('~', '/root')
> + self.logger.info("You can config packet_size in file %s.cfg," %
> self.suite_name + \
> + " in region 'suite' like packet_sizes=[64, 128, 256]")
> + if 'packet_sizes' in self.get_suite_cfg():
> + self.frame_sizes = self.get_suite_cfg()['packet_sizes']
> + # create an instance to set stream field setting
> + self.pktgen_helper = PacketGeneratorHelper()
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + self.dut.send_expect('rm -rf ./vhost-net*', '# ')
> + self.dut.send_expect('killall -s INT testpmd', '# ')
> + self.vhost_user = self.dut.new_session(suite='vhost-user')
> + self.virtio_user = self.dut.new_session(suite='virtio-user')
> + # Prepare the result table
> + self.virtio_mac = '00:11:22:33:44:10'
> + self.table_header = ['Frame']
> + self.table_header.append('Mode')
> + self.table_header.append('Mpps')
> + self.table_header.append('Queue Num')
> + self.table_header.append('% linerate')
> + self.result_table_create(self.table_header)
> +
> + def get_core_mask(self):
> + core_config = '1S/%dC/1T' % (self.nb_cores*2 + 2)
> + self.verify(self.cores_num >= (self.nb_cores*2 + 2),
> + 'There has not enought cores to test this case %s' %
> + self.running_case)
> + core_list = self.dut.get_core_list(
> + core_config, socket=self.ports_socket)
> + core_list_vhost_user = core_list[0:self.nb_cores+1]
> + core_list_virtio_user = core_list[self.nb_cores+1:self.nb_cores*2+2]
> + self.core_mask_vhost_user = utils.create_mask(core_list_vhost_user)
> + self.core_mask_virtio_user =
> + utils.create_mask(core_list_virtio_user)
> +
> + def send_and_verify(self):
> + """
> + Send packet with packet generator and verify
> + """
> + for frame_size in self.frame_sizes:
> + payload_size = frame_size - self.headers_size
> + tgen_input = []
> + rx_port = self.tester.get_local_port(self.dut_ports[0])
> + tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.tester.scapy_append(
> + 'wrpcap("vhost.pcap", [Ether(dst="%s")/IP()/UDP()/("X"*%d)])' %
> + (self.virtio_mac, payload_size))
> + tgen_input.append((tx_port, rx_port, "vhost.pcap"))
> +
> + self.tester.scapy_execute()
> + self.tester.pktgen.clear_streams()
> + streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100,
> + None, self.tester.pktgen)
> + _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
> + Mpps = pps / 1000000.0
> + self.verify(Mpps > 0, '%s can not receive packets of frame size %d' %
> (self.running_case, frame_size))
> + throughput = Mpps * 100 / \
> + float(self.wirespeed(self.nic, frame_size, 1))
> +
> + results_row = [frame_size]
> + results_row.append('virtio in container')
> + results_row.append(Mpps)
> + results_row.append(self.queue_number)
> + results_row.append(throughput)
> + self.result_table_add(results_row)
> +
> + def launch_testpmd_as_vhost(self):
> + """
> + start testpmd as vhost
> + """
> + command_line_client = self.dut.target + '/app/testpmd ' + \
> + '-c %s -n %d --socket-mem 1024,1024 --file-prefix=vhost ' +
> \
> + '--vdev "net_vhost0,iface=vhost-net,queues=%d,client=0" '
> + \
> + '-- -i --nb-cores=%d'
> + command_line_client = command_line_client %
> (self.core_mask_vhost_user,
> + self.mem_channels, self.queue_number,
> + self.nb_cores)
> + self.vhost_user.send_expect(command_line_client, 'testpmd> ', 30)
> + self.vhost_user.send_expect('start', 'testpmd> ', 30)
> +
> + def launch_testpmd_as_virtio_in_container(self):
> + """
> + start testpmd as virtio
> + """
> + command_line_user = 'docker run -i -t --privileged -v %s/vhost-
> net:/tmp/vhost-net ' + \
> + '-v /mnt/huge:/dev/hugepages ' + \
> + '-v %s:%s %s .%s/%s/app/testpmd -c %s -n %d ' + \
> + '-m 1024 --no-pci --file-prefix=container ' + \
> + '--
> vdev=virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=%d '
> + \
> + '-- -i --rxq=%d --txq=%d --nb-cores=%d'
> + command_line_user = command_line_user % (self.container_base_dir,
> + self.container_base_dir, self.container_base_dir, self.docker_image,
> + self.container_base_dir, self.dut.target, self.core_mask_virtio_user,
> + self.mem_channels, self.queue_number, self.queue_number,
> + self.queue_number, self.nb_cores)
> + self.virtio_user.send_expect(command_line_user, 'testpmd> ', 120)
> + self.virtio_user.send_expect('start', 'testpmd> ', 120)
> +
> + def close_all_apps(self):
> + """
> + close testpmd and vhost-switch
> + """
> + self.virtio_user.send_expect('quit', '# ', 60)
> + self.vhost_user.send_expect('quit', '# ', 60)
> + self.dut.close_session(self.vhost_user)
> + self.dut.close_session(self.virtio_user)
> +
> + def test_perf_packet_fwd_for_container(self):
> + """
> + packet forward test for container networking
> + """
> + self.queue_number = 1
> + self.nb_cores = 1
> + self.get_core_mask()
> + self.launch_testpmd_as_vhost()
> + self.launch_testpmd_as_virtio_in_container()
> + self.send_and_verify()
> + self.result_table_print()
> + self.close_all_apps()
> +
> + def test_perf_packet_fwd_with_multi_queues_for_container(self):
> + """
> + packet forward with multi-queues for container networking
> + """
> + self.queue_number = 2
> + self.nb_cores = 2
> + self.get_core_mask()
> + self.launch_testpmd_as_vhost()
> + self.launch_testpmd_as_virtio_in_container()
> + self.send_and_verify()
> + self.result_table_print()
> + self.close_all_apps()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.send_expect('killall -s INT testpmd', '# ')
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> --
> 2.7.4
next prev parent reply other threads:[~2019-07-10 7:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 23:38 [dts] [dts[[PATCH V2 1/2][virtio container] conf: add conf file for virtio container lihong
2019-06-26 23:38 ` [dts] [PATCH V2 2/2][virtio container] tests: add testsuite virtio user for container lihong
2019-06-27 8:24 ` Wang, Yinan
2019-07-02 7:32 ` Ma, LihongX
2019-07-10 7:19 ` Tu, Lijuan [this message]
2019-06-28 0:46 ` [dts] [dts[[PATCH V2 1/2][virtio container] conf: add conf file for virtio container Wang, Yinan
2019-07-02 7:28 ` Ma, LihongX
2019-07-10 6:24 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BADECEE@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=lihongx.ma@intel.com \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).