[dts] [PATCH V3 0/2] test_plans/packet_capture: upload test plan

[dts] [PATCH V3 0/2] test_plans/packet_capture: upload test plan

[yufengmx]

v2: 
 -  fix typo issue 
 -  fix html format issue 

yufengmx (2):
  test_plans/packet_capture: upload test plan
  test_plans/index: add packet_capture_test_plan label

 test_plans/index.rst                    |   1 +
 test_plans/packet_capture_test_plan.rst | 542 ++++++++++++++++++++++++++++++++
 2 files changed, 543 insertions(+)
 create mode 100644 test_plans/packet_capture_test_plan.rst

-- 
1.9.3

[dts] [PATCH V3 1/2] test_plans/packet_capture: upload test plan

[yufengmx]

Packet capture framework feature support packet capturing on dpdk ethernet devices.
DPDK provides dpdk-pdump tool under app/pdump directory for packet capturing on dpdk.

The  tool is a Data Plane Development Kit (DPDK) tool that runs as
a DPDK secondary process and is capable of enabling packet capture on dpdk ports.

The  tool depends on libpcap based PMD which is disabled by default in
the build configuration files, owing to an external dependency on the libpcap development
files which must be installed on the board. Once the libpcap development files are installed,
the libpcap based PMD can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling
the DPDK.

Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
 test_plans/packet_capture_test_plan.rst | 542 ++++++++++++++++++++++++++++++++
 1 file changed, 542 insertions(+)
 create mode 100644 test_plans/packet_capture_test_plan.rst

diff --git a/test_plans/packet_capture_test_plan.rst b/test_plans/packet_capture_test_plan.rst
new file mode 100644
index 0000000..05629d0
--- /dev/null
+++ b/test_plans/packet_capture_test_plan.rst
@@ -0,0 +1,542 @@
+.. Copyright (c) <2010-2019> Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==============
+packet capture
+==============
+
+Packet capture framework feature support packet capturing on dpdk ethernet
+devices. DPDK provides dpdk-pdump tool under app/pdump directory for packet
+capturing on dpdk.
+
+The dpdk-pdump application will act as the secondary process. The EAL thread
+polls for packet capture fd. If fd polled matches packet capture fd, it will
+initiate packet capture processing.
+
+The testpmd application will act as the primary process. The primary process
+create socket for packet capture connection with the secondary process and
+registers socket with packet capture epoll event. Packet capture event will
+be polled as part of interrupt thread.
+
+The primary process creates mempool and two rte_rings for packets duplication
+and sharing packet info with the secondary process respectively.
+
+Upon receiving packet capture event, the primary process receive either
+register RX/TX callbacks or remove RX/TX callbacks message from the secondary
+process on socket.If packet matches, reference count of packet will be
+incremented and enqueued to second rte_ring for the secondary process to use.
+
+DPDK technical doc refer to::
+
+   dpdk/doc/guides/tools/pdump.rst
+
+Prerequisites
+=============
+
+2x NICs (2 full duplex ports per NIC) plugged into the available slots on a
+platform, another two nic ports are linked with cables.
+
+Connections ports between TESTER and DUT::
+
+       TESTER                                DUT
+                    physical link
+     .--------.                          .--------.
+     | portA0 | <----------------------> | portB0 |
+     |        |                          |        |
+     | portA1 | <----------------------> | portB1 |
+     '--------'                          |        |
+                                 ------> | portB2 |
+                                |        |        |
+                                 ------> | portB3 |
+                                         '--------'
+
+note: portB0/portB1 are the binded ports.
+      portB2/portB3 keep link up status and don't bind to dpdk driver.
+      Except portB0/portB1, DUT should have other two ports on link up status
+
+Test cases
+==========
+
+The testpmd application act as server process with port-topology chained mode,
+the dpdk-pdump act as client process to dump capture packet with different
+options setting. Select one port of tester as tx port, another port of tester
+as rx port, send different type packets from two ports, check pcap file
+content dumped by scapy and tcpdump to confirm testpmd working correctly,
+check pcap file content dumped by tcpdump and dpdk-pdump to confirm
+dpdk-pdump working correctly.
+
+dpdk-pdump command format
+-------------------------
+
+#. packet capture framework tool dpdk-pdump command format, parameters inside
+the parenthesis represents the mandatory parameters, parameters inside the
+square brackets represents optional
+
+parameters::
+
+    ./app/dpdk-pdump -- --pdump=
+    '(port = <port_id> |device_id = <pci address>),
+    (queue=<queue number>),
+    (rx-dev=<iface/path to pcap file> | tx-dev=<iface/path to pcap file>),
+    [ring-size=<size>],
+    [mbuf-size=<size>],
+    [total-num-mbufs=<size>]'
+
+transmission packet format
+--------------------------
+
+#. IP_RAW::
+
+    [Ether()/IP()/Raw('\0'*60)]
+
+#. TCP::
+
+    [Ether()/IP()/TCP()/Raw('\0'*60)]
+
+#. UDP::
+
+    [Ether()/IP()/UDP()/Raw('\0'*60)]
+
+#. SCTP::
+
+    [Ether()/IP()/SCTP()/Raw('\0'*40)]
+
+#. IPv6_TCP::
+
+    [Ether()/IPv6()/TCP()/Raw('\0'*60)]
+
+#. IPv6_UDP::
+
+    [Ether()/IPv6()/UDP()/Raw('\0'*60)]
+
+#. IPv6_SCTP::
+
+    [Ether()/IP()/IPv6()/SCTP()/Raw('\0'*40)]
+
+#. VLAN_UDP::
+
+    [Ether()/Dot1Q()/IP()/UDP()/Raw('\0'*40)]
+
+#. TIMESYNC::
+
+    [Ether(dst='FF:FF:FF:FF:FF:FF',type=0x88f7)/"\\x00\\x02"]
+
+#. ARP::
+
+    [Ether(dst='FF:FF:FF:FF:FF:FF')/ARP()]
+
+#. LLDP(LLDP()/LLDPManagementAddress() method are in dts/dep/lldp.py)::
+
+    [Ether()/LLDP()/LLDPManagementAddress()]
+
+port configuration
+------------------
+
+#. confirm two NICs physical link on a platform::
+
+    dut port 0 <---> tester port 0
+    dut port 1 <---> tester port 1
+
+#. Bind two port on DUT::
+
+    ./usertools/dpdk_nic_bind.py --bind=igb_uio <dut port 0 pci address> <dut port 1 pci address>
+
+#. On dut, use port 0 as rx/tx port. If dut port 0 rx dump is set, scapy send
+   packet from tester port 0 and tcpdump dumps tester port 1's packet. If dut
+   port 0 tx dump is set, scapy send packet from tester port 1 and tcpdump dumps
+   tester port 0's packet.
+
+#. If using interfaces as dpdk-pdump vdev, prepare two ports on DUT, which
+   haven't been binded to dpdk and have been in linked status
+
+Test Case: test pdump port
+==========================
+
+Test different port type definition options::
+
+    port=<dut port id>
+    device_id=<dut pci address>
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump::
+
+    ./app/dpdk-pdump -- --pdump  '<port option>,queue=*,\
+    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+file dumped by dpdk-pdump with pcap files dumped by tcpdump.
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+file dumped by dpdk-pdump with pcap files dumped by tcpdump::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
+
+
+Test Case: test pdump queue
+===========================
+
+Capture first queue traffic.
+
+test different queue options::
+
+    first queue 'queue=0'
+    all queue 'queue=*'
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump::
+
+    ./app/dpdk-pdump -- --pdump  'port=0,<queue option>,\
+    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
+
+
+Test Case: test pdump dev pcap
+==============================
+
+Dump rx/tx transmission packets into a specified pcap files.
+
+test different dump options::
+
+    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap
+    rx-dev=/tmp/pdump-rx.pcap
+    tx-dev=/tmp/pdump-tx.pcap
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan(other packet ignore this step)::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump with pdump options::
+
+    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,<dump object>'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore when only
+   set tx-dev).
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore when only
+   set rx-dev)::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
+
+
+Test Case: test pdump dev iface
+===============================
+
+Dump rx/tx transmission packets to a specified port, which is on link status.
+
+test different dump options::
+
+    tx-dev=<dut tx port name>,rx-dev=<dut rx port name>
+    rx-dev=<dut rx port name>
+    tx-dev=<dut tx port name>
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan(other packet ignore this step)::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump with pdump options::
+
+    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,<dump object>'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Set up linux's tcpdump to receiver packet of dpdk-pdump on Dut::
+
+    when rx-dev is set, use 'tcpdump -i <dut rx port name> -w /tmp/pdump-rx.pcap'
+    when tx-dev is set, use 'tcpdump -i <dut tx port name> -w /tmp/pdump-tx.pcap'
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore when only
+   set tx-dev).
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore when only
+   set rx-dev)::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
+
+
+Test Case: test pdump ring size
+===============================
+
+Test ring size option, set value within 2^[1~27].
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump with pdump options::
+
+    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
+    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,ring-size=1024'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
+
+
+Test Case: test pdump mbuf size
+===============================
+
+Test mbuf size option, set value within [252~50000]. min value is decided by
+single packet size, max value is decided by test platform memory size.
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump with pdump options::
+
+    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
+    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,mbuf-size=2048'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
+
+
+Test Case: test pdump total num mbufs
+=====================================
+
+Test total-num-mbufs option, set value within [1025~65535]
+
+steps:
+
+#. Boot up dpdk's testpmd with chained option::
+
+    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
+    testpmd> set fwd io
+    testpmd> start
+
+#. When test VLAN_UDP type packet transmission, set vlan::
+
+    testpmd> vlan set filter off 1
+    testpmd> start
+
+#. Boot up dpdk-pdump with pdump options::
+
+    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
+    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,total-num-mbufs=8191'
+
+#. Set up linux's tcpdump to receiver packet on tester::
+
+    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
+    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
+
+#. Send packet on tester by port 0::
+
+    sendp(<packet format>, iface=<port 0 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
+
+#. Send packet on tester by port 1::
+
+    sendp(<packet format>, iface=<port 1 name>)
+
+#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare pcap
+   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
+
+    pkt=rdpcap('xxxx1.pcap')
+    pkt[0].show2()
+    pkt=rdpcap('xxxx2.pcap')
+    pkt[0].show2()
\ No newline at end of file
-- 
1.9.3

[dts] [PATCH V3 2/2] test_plans/index: add packet_capture_test_plan label

[yufengmx]

add packet_capture_test_plan label

Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
 test_plans/index.rst | 1 +
 1 file changed, 1 insertion(+)

diff --git a/test_plans/index.rst b/test_plans/index.rst
index 52d4e55..b49c5eb 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -217,3 +217,4 @@ The following are the test plans for the DPDK DTS automated test system.
     efd_test_plan
     example_build_test_plan
     flow_classify_test_plan
+    packet_capture_test_plan
-- 
1.9.3

Re: [dts] [PATCH V3 1/2] test_plans/packet_capture: upload test plan

[Wang, Yinan]

Acked-by: Wang, Yinan <yinan.wang@intel.com>

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx
> Sent: 2019年7月10日 11:10
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts] [PATCH V3 1/2] test_plans/packet_capture: upload test plan
> 
> 
> Packet capture framework feature support packet capturing on dpdk ethernet
> devices.
> DPDK provides dpdk-pdump tool under app/pdump directory for packet
> capturing on dpdk.
> 
> The  tool is a Data Plane Development Kit (DPDK) tool that runs as a DPDK
> secondary process and is capable of enabling packet capture on dpdk ports.
> 
> The  tool depends on libpcap based PMD which is disabled by default in the
> build configuration files, owing to an external dependency on the libpcap
> development files which must be installed on the board. Once the libpcap
> development files are installed, the libpcap based PMD can be enabled by
> setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK.
> 
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
>  test_plans/packet_capture_test_plan.rst | 542
> ++++++++++++++++++++++++++++++++
>  1 file changed, 542 insertions(+)
>  create mode 100644 test_plans/packet_capture_test_plan.rst
> 
> diff --git a/test_plans/packet_capture_test_plan.rst
> b/test_plans/packet_capture_test_plan.rst
> new file mode 100644
> index 0000000..05629d0
> --- /dev/null
> +++ b/test_plans/packet_capture_test_plan.rst
> @@ -0,0 +1,542 @@
> +.. Copyright (c) <2010-2019> Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==============
> +packet capture
> +==============
> +
> +Packet capture framework feature support packet capturing on dpdk
> +ethernet devices. DPDK provides dpdk-pdump tool under app/pdump
> +directory for packet capturing on dpdk.
> +
> +The dpdk-pdump application will act as the secondary process. The EAL
> +thread polls for packet capture fd. If fd polled matches packet capture
> +fd, it will initiate packet capture processing.
> +
> +The testpmd application will act as the primary process. The primary
> +process create socket for packet capture connection with the secondary
> +process and registers socket with packet capture epoll event. Packet
> +capture event will be polled as part of interrupt thread.
> +
> +The primary process creates mempool and two rte_rings for packets
> +duplication and sharing packet info with the secondary process respectively.
> +
> +Upon receiving packet capture event, the primary process receive either
> +register RX/TX callbacks or remove RX/TX callbacks message from the
> +secondary process on socket.If packet matches, reference count of
> +packet will be incremented and enqueued to second rte_ring for the
> secondary process to use.
> +
> +DPDK technical doc refer to::
> +
> +   dpdk/doc/guides/tools/pdump.rst
> +
> +Prerequisites
> +=============
> +
> +2x NICs (2 full duplex ports per NIC) plugged into the available slots
> +on a platform, another two nic ports are linked with cables.
> +
> +Connections ports between TESTER and DUT::
> +
> +       TESTER                                DUT
> +                    physical link
> +     .--------.                          .--------.
> +     | portA0 | <----------------------> | portB0 |
> +     |        |                          |        |
> +     | portA1 | <----------------------> | portB1 |
> +     '--------'                          |        |
> +                                 ------> | portB2 |
> +                                |        |        |
> +                                 ------> | portB3 |
> +                                         '--------'
> +
> +note: portB0/portB1 are the binded ports.
> +      portB2/portB3 keep link up status and don't bind to dpdk driver.
> +      Except portB0/portB1, DUT should have other two ports on link up
> +status
> +
> +Test cases
> +==========
> +
> +The testpmd application act as server process with port-topology
> +chained mode, the dpdk-pdump act as client process to dump capture
> +packet with different options setting. Select one port of tester as tx
> +port, another port of tester as rx port, send different type packets
> +from two ports, check pcap file content dumped by scapy and tcpdump to
> +confirm testpmd working correctly, check pcap file content dumped by
> +tcpdump and dpdk-pdump to confirm dpdk-pdump working correctly.
> +
> +dpdk-pdump command format
> +-------------------------
> +
> +#. packet capture framework tool dpdk-pdump command format, parameters
> +inside the parenthesis represents the mandatory parameters, parameters
> +inside the square brackets represents optional
> +
> +parameters::
> +
> +    ./app/dpdk-pdump -- --pdump=
> +    '(port = <port_id> |device_id = <pci address>),
> +    (queue=<queue number>),
> +    (rx-dev=<iface/path to pcap file> | tx-dev=<iface/path to pcap file>),
> +    [ring-size=<size>],
> +    [mbuf-size=<size>],
> +    [total-num-mbufs=<size>]'
> +
> +transmission packet format
> +--------------------------
> +
> +#. IP_RAW::
> +
> +    [Ether()/IP()/Raw('\0'*60)]
> +
> +#. TCP::
> +
> +    [Ether()/IP()/TCP()/Raw('\0'*60)]
> +
> +#. UDP::
> +
> +    [Ether()/IP()/UDP()/Raw('\0'*60)]
> +
> +#. SCTP::
> +
> +    [Ether()/IP()/SCTP()/Raw('\0'*40)]
> +
> +#. IPv6_TCP::
> +
> +    [Ether()/IPv6()/TCP()/Raw('\0'*60)]
> +
> +#. IPv6_UDP::
> +
> +    [Ether()/IPv6()/UDP()/Raw('\0'*60)]
> +
> +#. IPv6_SCTP::
> +
> +    [Ether()/IP()/IPv6()/SCTP()/Raw('\0'*40)]
> +
> +#. VLAN_UDP::
> +
> +    [Ether()/Dot1Q()/IP()/UDP()/Raw('\0'*40)]
> +
> +#. TIMESYNC::
> +
> +    [Ether(dst='FF:FF:FF:FF:FF:FF',type=0x88f7)/"\\x00\\x02"]
> +
> +#. ARP::
> +
> +    [Ether(dst='FF:FF:FF:FF:FF:FF')/ARP()]
> +
> +#. LLDP(LLDP()/LLDPManagementAddress() method are in dts/dep/lldp.py)::
> +
> +    [Ether()/LLDP()/LLDPManagementAddress()]
> +
> +port configuration
> +------------------
> +
> +#. confirm two NICs physical link on a platform::
> +
> +    dut port 0 <---> tester port 0
> +    dut port 1 <---> tester port 1
> +
> +#. Bind two port on DUT::
> +
> +    ./usertools/dpdk_nic_bind.py --bind=igb_uio <dut port 0 pci
> + address> <dut port 1 pci address>
> +
> +#. On dut, use port 0 as rx/tx port. If dut port 0 rx dump is set, scapy send
> +   packet from tester port 0 and tcpdump dumps tester port 1's packet. If dut
> +   port 0 tx dump is set, scapy send packet from tester port 1 and tcpdump
> dumps
> +   tester port 0's packet.
> +
> +#. If using interfaces as dpdk-pdump vdev, prepare two ports on DUT, which
> +   haven't been binded to dpdk and have been in linked status
> +
> +Test Case: test pdump port
> +==========================
> +
> +Test different port type definition options::
> +
> +    port=<dut port id>
> +    device_id=<dut pci address>
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump::
> +
> +    ./app/dpdk-pdump -- --pdump  '<port option>,queue=*,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> +Compare pcap file dumped by dpdk-pdump with pcap files dumped by
> tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> +Compare pcap file dumped by dpdk-pdump with pcap files dumped by
> tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump queue
> +===========================
> +
> +Capture first queue traffic.
> +
> +test different queue options::
> +
> +    first queue 'queue=0'
> +    all queue 'queue=*'
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,<queue option>,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump dev pcap
> +==============================
> +
> +Dump rx/tx transmission packets into a specified pcap files.
> +
> +test different dump options::
> +
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap
> +    rx-dev=/tmp/pdump-rx.pcap
> +    tx-dev=/tmp/pdump-tx.pcap
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan(other packet
> ignore this step)::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,<dump object>'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set tx-dev).
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set rx-dev)::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump dev iface
> +===============================
> +
> +Dump rx/tx transmission packets to a specified port, which is on link status.
> +
> +test different dump options::
> +
> +    tx-dev=<dut tx port name>,rx-dev=<dut rx port name>
> +    rx-dev=<dut rx port name>
> +    tx-dev=<dut tx port name>
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan(other packet
> ignore this step)::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,<dump object>'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Set up linux's tcpdump to receiver packet of dpdk-pdump on Dut::
> +
> +    when rx-dev is set, use 'tcpdump -i <dut rx port name> -w
> /tmp/pdump-rx.pcap'
> +    when tx-dev is set, use 'tcpdump -i <dut tx port name> -w
> /tmp/pdump-tx.pcap'
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set tx-dev).
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set rx-dev)::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump ring size
> +===============================
> +
> +Test ring size option, set value within 2^[1~27].
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
> +
> tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,ring-size=1024'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump mbuf size
> +===============================
> +
> +Test mbuf size option, set value within [252~50000]. min value is
> +decided by single packet size, max value is decided by test platform memory
> size.
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
> +
> tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,mbuf-size=2048'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump total num mbufs
> +=====================================
> +
> +Test total-num-mbufs option, set value within [1025~65535]
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
> +
> tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,total-num-mbufs=81
> 91'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump. Compare
> pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> \ No newline at end of file
> --
> 1.9.3

Re: [dts] [PATCH V3 0/2] test_plans/packet_capture: upload test plan

[Wang, Yinan]

Acked-by: Wang, Yinan <yinan.wang@intel.com>

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx
> Sent: 2019年7月10日 11:10
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts] [PATCH V3 0/2] test_plans/packet_capture: upload test plan
> 
> 
> v2:
>  -  fix typo issue
>  -  fix html format issue
> 
> yufengmx (2):
>   test_plans/packet_capture: upload test plan
>   test_plans/index: add packet_capture_test_plan label
> 
>  test_plans/index.rst                    |   1 +
>  test_plans/packet_capture_test_plan.rst | 542
> ++++++++++++++++++++++++++++++++
>  2 files changed, 543 insertions(+)
>  create mode 100644 test_plans/packet_capture_test_plan.rst
> 
> --
> 1.9.3

Re: [dts] [PATCH V3 2/2] test_plans/index: add packet_capture_test_plan label

[Wang, Yinan]

Acked-by: Wang, Yinan <yinan.wang@intel.com>

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx
> Sent: 2019年7月10日 11:10
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts] [PATCH V3 2/2] test_plans/index: add packet_capture_test_plan
> label
> 
> 
> add packet_capture_test_plan label
> 
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
>  test_plans/index.rst | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/test_plans/index.rst b/test_plans/index.rst index 52d4e55..b49c5eb
> 100644
> --- a/test_plans/index.rst
> +++ b/test_plans/index.rst
> @@ -217,3 +217,4 @@ The following are the test plans for the DPDK DTS
> automated test system.
>      efd_test_plan
>      example_build_test_plan
>      flow_classify_test_plan
> +    packet_capture_test_plan
> --
> 1.9.3

Re: [dts] [PATCH V3 2/2] test_plans/index: add packet_capture_test_plan label

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx
> Sent: Wednesday, July 10, 2019 11:10 AM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts] [PATCH V3 2/2] test_plans/index: add
> packet_capture_test_plan label
> 
> 
> add packet_capture_test_plan label
> 
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
>  test_plans/index.rst | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/test_plans/index.rst b/test_plans/index.rst index
> 52d4e55..b49c5eb 100644
> --- a/test_plans/index.rst
> +++ b/test_plans/index.rst
> @@ -217,3 +217,4 @@ The following are the test plans for the DPDK DTS
> automated test system.
>      efd_test_plan
>      example_build_test_plan
>      flow_classify_test_plan
> +    packet_capture_test_plan
> --
> 1.9.3

Re: [dts] [PATCH V3 1/2] test_plans/packet_capture: upload test plan

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yufengmx
> Sent: Wednesday, July 10, 2019 11:10 AM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts] [PATCH V3 1/2] test_plans/packet_capture: upload test plan
> 
> 
> Packet capture framework feature support packet capturing on dpdk
> ethernet devices.
> DPDK provides dpdk-pdump tool under app/pdump directory for packet
> capturing on dpdk.
> 
> The  tool is a Data Plane Development Kit (DPDK) tool that runs as a DPDK
> secondary process and is capable of enabling packet capture on dpdk ports.
> 
> The  tool depends on libpcap based PMD which is disabled by default in the
> build configuration files, owing to an external dependency on the libpcap
> development files which must be installed on the board. Once the libpcap
> development files are installed, the libpcap based PMD can be enabled by
> setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK.
> 
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
>  test_plans/packet_capture_test_plan.rst | 542
> ++++++++++++++++++++++++++++++++
>  1 file changed, 542 insertions(+)
>  create mode 100644 test_plans/packet_capture_test_plan.rst
> 
> diff --git a/test_plans/packet_capture_test_plan.rst
> b/test_plans/packet_capture_test_plan.rst
> new file mode 100644
> index 0000000..05629d0
> --- /dev/null
> +++ b/test_plans/packet_capture_test_plan.rst
> @@ -0,0 +1,542 @@
> +.. Copyright (c) <2010-2019> Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==============
> +packet capture
> +==============
> +
> +Packet capture framework feature support packet capturing on dpdk
> +ethernet devices. DPDK provides dpdk-pdump tool under app/pdump
> +directory for packet capturing on dpdk.
> +
> +The dpdk-pdump application will act as the secondary process. The EAL
> +thread polls for packet capture fd. If fd polled matches packet capture
> +fd, it will initiate packet capture processing.
> +
> +The testpmd application will act as the primary process. The primary
> +process create socket for packet capture connection with the secondary
> +process and registers socket with packet capture epoll event. Packet
> +capture event will be polled as part of interrupt thread.
> +
> +The primary process creates mempool and two rte_rings for packets
> +duplication and sharing packet info with the secondary process respectively.
> +
> +Upon receiving packet capture event, the primary process receive either
> +register RX/TX callbacks or remove RX/TX callbacks message from the
> +secondary process on socket.If packet matches, reference count of
> +packet will be incremented and enqueued to second rte_ring for the
> secondary process to use.
> +
> +DPDK technical doc refer to::
> +
> +   dpdk/doc/guides/tools/pdump.rst
> +
> +Prerequisites
> +=============
> +
> +2x NICs (2 full duplex ports per NIC) plugged into the available slots
> +on a platform, another two nic ports are linked with cables.
> +
> +Connections ports between TESTER and DUT::
> +
> +       TESTER                                DUT
> +                    physical link
> +     .--------.                          .--------.
> +     | portA0 | <----------------------> | portB0 |
> +     |        |                          |        |
> +     | portA1 | <----------------------> | portB1 |
> +     '--------'                          |        |
> +                                 ------> | portB2 |
> +                                |        |        |
> +                                 ------> | portB3 |
> +                                         '--------'
> +
> +note: portB0/portB1 are the binded ports.
> +      portB2/portB3 keep link up status and don't bind to dpdk driver.
> +      Except portB0/portB1, DUT should have other two ports on link up
> +status
> +
> +Test cases
> +==========
> +
> +The testpmd application act as server process with port-topology
> +chained mode, the dpdk-pdump act as client process to dump capture
> +packet with different options setting. Select one port of tester as tx
> +port, another port of tester as rx port, send different type packets
> +from two ports, check pcap file content dumped by scapy and tcpdump to
> +confirm testpmd working correctly, check pcap file content dumped by
> +tcpdump and dpdk-pdump to confirm dpdk-pdump working correctly.
> +
> +dpdk-pdump command format
> +-------------------------
> +
> +#. packet capture framework tool dpdk-pdump command format,
> parameters
> +inside the parenthesis represents the mandatory parameters, parameters
> +inside the square brackets represents optional
> +
> +parameters::
> +
> +    ./app/dpdk-pdump -- --pdump=
> +    '(port = <port_id> |device_id = <pci address>),
> +    (queue=<queue number>),
> +    (rx-dev=<iface/path to pcap file> | tx-dev=<iface/path to pcap file>),
> +    [ring-size=<size>],
> +    [mbuf-size=<size>],
> +    [total-num-mbufs=<size>]'
> +
> +transmission packet format
> +--------------------------
> +
> +#. IP_RAW::
> +
> +    [Ether()/IP()/Raw('\0'*60)]
> +
> +#. TCP::
> +
> +    [Ether()/IP()/TCP()/Raw('\0'*60)]
> +
> +#. UDP::
> +
> +    [Ether()/IP()/UDP()/Raw('\0'*60)]
> +
> +#. SCTP::
> +
> +    [Ether()/IP()/SCTP()/Raw('\0'*40)]
> +
> +#. IPv6_TCP::
> +
> +    [Ether()/IPv6()/TCP()/Raw('\0'*60)]
> +
> +#. IPv6_UDP::
> +
> +    [Ether()/IPv6()/UDP()/Raw('\0'*60)]
> +
> +#. IPv6_SCTP::
> +
> +    [Ether()/IP()/IPv6()/SCTP()/Raw('\0'*40)]
> +
> +#. VLAN_UDP::
> +
> +    [Ether()/Dot1Q()/IP()/UDP()/Raw('\0'*40)]
> +
> +#. TIMESYNC::
> +
> +    [Ether(dst='FF:FF:FF:FF:FF:FF',type=0x88f7)/"\\x00\\x02"]
> +
> +#. ARP::
> +
> +    [Ether(dst='FF:FF:FF:FF:FF:FF')/ARP()]
> +
> +#. LLDP(LLDP()/LLDPManagementAddress() method are in dts/dep/lldp.py)::
> +
> +    [Ether()/LLDP()/LLDPManagementAddress()]
> +
> +port configuration
> +------------------
> +
> +#. confirm two NICs physical link on a platform::
> +
> +    dut port 0 <---> tester port 0
> +    dut port 1 <---> tester port 1
> +
> +#. Bind two port on DUT::
> +
> +    ./usertools/dpdk_nic_bind.py --bind=igb_uio <dut port 0 pci
> + address> <dut port 1 pci address>
> +
> +#. On dut, use port 0 as rx/tx port. If dut port 0 rx dump is set, scapy send
> +   packet from tester port 0 and tcpdump dumps tester port 1's packet. If
> dut
> +   port 0 tx dump is set, scapy send packet from tester port 1 and tcpdump
> dumps
> +   tester port 0's packet.
> +
> +#. If using interfaces as dpdk-pdump vdev, prepare two ports on DUT, which
> +   haven't been binded to dpdk and have been in linked status
> +
> +Test Case: test pdump port
> +==========================
> +
> +Test different port type definition options::
> +
> +    port=<dut port id>
> +    device_id=<dut pci address>
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump::
> +
> +    ./app/dpdk-pdump -- --pdump  '<port option>,queue=*,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> +Compare pcap file dumped by dpdk-pdump with pcap files dumped by
> tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> +Compare pcap file dumped by dpdk-pdump with pcap files dumped by
> tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump queue
> +===========================
> +
> +Capture first queue traffic.
> +
> +test different queue options::
> +
> +    first queue 'queue=0'
> +    all queue 'queue=*'
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,<queue option>,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump dev pcap
> +==============================
> +
> +Dump rx/tx transmission packets into a specified pcap files.
> +
> +test different dump options::
> +
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap
> +    rx-dev=/tmp/pdump-rx.pcap
> +    tx-dev=/tmp/pdump-tx.pcap
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan(other packet
> ignore this step)::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,<dump object>'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set tx-dev).
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set rx-dev)::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump dev iface
> +===============================
> +
> +Dump rx/tx transmission packets to a specified port, which is on link status.
> +
> +test different dump options::
> +
> +    tx-dev=<dut tx port name>,rx-dev=<dut rx port name>
> +    rx-dev=<dut rx port name>
> +    tx-dev=<dut tx port name>
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan(other packet
> ignore this step)::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,<dump object>'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Set up linux's tcpdump to receiver packet of dpdk-pdump on Dut::
> +
> +    when rx-dev is set, use 'tcpdump -i <dut rx port name> -w /tmp/pdump-
> rx.pcap'
> +    when tx-dev is set, use 'tcpdump -i <dut tx port name> -w /tmp/pdump-
> tx.pcap'
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set tx-dev).
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump(ignore
> when only
> +   set rx-dev)::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump ring size
> +===============================
> +
> +Test ring size option, set value within 2^[1~27].
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,ring-size=1024'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump mbuf size
> +===============================
> +
> +Test mbuf size option, set value within [252~50000]. min value is
> +decided by single packet size, max value is decided by test platform
> memory size.
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,mbuf-
> size=2048'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> +
> +
> +Test Case: test pdump total num mbufs
> +=====================================
> +
> +Test total-num-mbufs option, set value within [1025~65535]
> +
> +steps:
> +
> +#. Boot up dpdk's testpmd with chained option::
> +
> +    ./app/testpmd -c 0x6 -n 4 -- -i --port-topology=chained
> +    testpmd> set fwd io
> +    testpmd> start
> +
> +#. When test VLAN_UDP type packet transmission, set vlan::
> +
> +    testpmd> vlan set filter off 1
> +    testpmd> start
> +
> +#. Boot up dpdk-pdump with pdump options::
> +
> +    ./app/dpdk-pdump -- --pdump  'port=0,queue=*,\
> +    tx-dev=/tmp/pdump-tx.pcap,rx-dev=/tmp/pdump-rx.pcap,total-num-
> mbufs=8191'
> +
> +#. Set up linux's tcpdump to receiver packet on tester::
> +
> +    tcpdump -i <rx port name> -w /tmp/sniff-<rx port name>.pcap
> +    tcpdump -i <tx port name> -w /tmp/sniff-<tx port name>.pcap
> +
> +#. Send packet on tester by port 0::
> +
> +    sendp(<packet format>, iface=<port 0 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump.
> +
> +#. Send packet on tester by port 1::
> +
> +    sendp(<packet format>, iface=<port 1 name>)
> +
> +#. Compare pcap file of scapy with the pcap file dumped by tcpdump.
> Compare pcap
> +   file dumped by dpdk-pdump with pcap files dumped by tcpdump::
> +
> +    pkt=rdpcap('xxxx1.pcap')
> +    pkt[0].show2()
> +    pkt=rdpcap('xxxx2.pcap')
> +    pkt[0].show2()
> \ No newline at end of file
> --
> 1.9.3