From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Ma, LihongX" <lihongx.ma@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>,
"Ma, LihongX" <lihongx.ma@intel.com>
Subject: Re: [dts] [PATCH V1] tests: add testsuite pvp vhost user reconnect
Date: Wed, 7 Aug 2019 03:44:10 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BAFECE4@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1563239473-21171-1-git-send-email-lihongx.ma@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Tuesday, July 16, 2019 9:11 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts] [PATCH V1] tests: add testsuite pvp vhost user reconnect
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> tests/TestSuite_pvp_vhost_user_reconnect.py | 407
> ++++++++++++++++++++++++++++
> 1 file changed, 407 insertions(+)
> create mode 100644 tests/TestSuite_pvp_vhost_user_reconnect.py
>
> diff --git a/tests/TestSuite_pvp_vhost_user_reconnect.py
> b/tests/TestSuite_pvp_vhost_user_reconnect.py
> new file mode 100644
> index 0000000..5568376
> --- /dev/null
> +++ b/tests/TestSuite_pvp_vhost_user_reconnect.py
> @@ -0,0 +1,407 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Vhost reconnect two VM test suite.
> +Becase this suite will use the reconnet feature, the VM will start as
> +server mode, so the qemu version should greater than 2.7 """
> +import re
> +import utils
> +import time
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from virt_common import VM
> +from pktgen import PacketGeneratorHelper
> +
> +
> +class TestPVPVhostUserReconnect(TestCase):
> +
> + def set_up_all(self):
> +
> + # Get and verify the ports
> + self.dut_ports = self.dut.get_ports()
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for
> + testing")
> +
> + # Get the port's socket
> + self.pf = self.dut_ports[0]
> + netdev = self.dut.ports_info[self.pf]['port']
> + self.socket = netdev.get_nic_socket()
> + self.cores = self.dut.get_core_list("1S/2C/1T", socket=self.socket)
> + self.coremask = utils.create_mask(self.cores)
> + self.memory_channel = self.dut.get_memory_channels()
> + self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
> + # set diff arg about mem_socket base on socket number
> + if len(set([int(core['socket']) for core in self.dut.cores])) == 1:
> + self.socket_mem = '1024'
> + else:
> + self.socket_mem = '1024,1024'
> +
> + self.reconnect_times = 5
> + self.vm_num = 1
> + self.frame_sizes = [64, 1518]
> + self.virtio_ip = ["1.1.1.2", "1.1.1.3"]
> + self.virtio_mac = ["52:54:00:00:00:01",
> + "52:54:00:00:00:02"]
> + self.src1 = "192.168.4.1"
> + self.dst1 = "192.168.3.1"
> + self.checked_vm = False
> + self.header_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] +
> + HEADER_SIZE['udp']
> +
> + # create an instance to set stream field setting
> + self.pktgen_helper = PacketGeneratorHelper()
> +
> + def set_up(self):
> + """
> + run before each test case.
> + clear the execution ENV
> + """
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "# ")
> + self.dut.send_expect("rm -rf ./vhost-net*", "# ")
> + self.vhost_user = self.dut.new_session(suite="vhost-user")
> +
> + def launch_testpmd_as_vhost_user(self):
> + """
> + launch the testpmd as vhost user
> + """
> + vdev_info = ""
> + for i in range(self.vm_num):
> + vdev_info += "--vdev 'net_vhost%d,iface=vhost-
> net%d,client=1,queues=1' " % (i, i)
> + self.vhostapp_testcmd = self.dut.base_dir + \
> + "/%s/app/testpmd -c %s -n %d --socket-mem %s --legacy-mem"
> + \
> + " --file-prefix=vhost %s" + \
> + " -- -i --port-topology=chained --nb-cores=1" + \
> + " --txd=1024 --rxd=1024"
> + self.vhostapp_testcmd = self.vhostapp_testcmd % (self.target,
> + self.coremask, self.memory_channel,
> + self.socket_mem, vdev_info)
> + self.vhost_user.send_expect(self.vhostapp_testcmd, "testpmd> ", 40)
> + self.vhost_user.send_expect("set fwd mac", "testpmd> ", 40)
> + self.vhost_user.send_expect("start", "testpmd> ", 40)
> +
> + def launch_testpmd_as_vhost_user_with_no_pci(self):
> + """
> + launch the testpmd as vhost user
> + """
> + vdev_info = ""
> + for i in range(self.vm_num):
> + vdev_info += "--vdev 'net_vhost%d,iface=vhost-
> net%d,client=1,queues=1' " % (i, i)
> + self.vhostapp_testcmd = self.dut.base_dir + \
> + "/%s/app/testpmd -c %s -n %d --socket-mem %s --legacy-mem"
> + \
> + " --no-pci --file-prefix=vhost %s" + \
> + " -- -i --nb-cores=1 --txd=1024 --rxd=1024"
> + self.vhostapp_testcmd = self.vhostapp_testcmd % (self.target,
> + self.coremask, self.memory_channel,
> + self.socket_mem, vdev_info)
> + self.vhost_user.send_expect(self.vhostapp_testcmd, "testpmd> ", 40)
> + self.vhost_user.send_expect("start", "testpmd> ", 40)
> +
> + def check_link_status_after_testpmd_start(self, dut_info):
> + """
> + check the link status is up after testpmd start
> + """
> + loop = 1
> + while(loop <= 5):
> + out = dut_info.send_expect("show port info all", "testpmd> ", 120)
> + port_status = re.findall("Link\s*status:\s*([a-z]*)", out)
> + if("down" not in port_status):
> + break
> + time.sleep(3)
> + loop = loop + 1
> +
> + self.verify("down" not in port_status, "port can not up after
> + restart")
> +
> + def check_qemu_version(self, vm_config):
> + """
> + in this suite, the qemu version should greater 2.7
> + """
> + if self.checked_vm:
> + return
> +
> + self.vm_qemu_version = vm_config.qemu_emulator
> + params_number = len(vm_config.params)
> + for i in range(params_number):
> + if vm_config.params[i].keys()[0] == 'qemu':
> + self.vm_qemu_version =
> + vm_config.params[i]['qemu'][0]['path']
> +
> + out = self.dut.send_expect("%s --version" % self.vm_qemu_version, "#")
> + result = re.search("QEMU\s*emulator\s*version\s*(\d*.\d*)", out)
> + self.verify(result is not None,
> + 'the qemu path may be not right: %s' % self.vm_qemu_version)
> + version = result.group(1)
> + index = version.find('.')
> + self.verify(int(version[:index]) > 2 or
> + (int(version[:index]) == 2 and int(version[index+1:]) >= 7),
> + 'This qemu version should greater than 2.7 ' + \
> + 'in this suite, please config it in vhost_sample.cfg file')
> + self.checked_vm = True
> +
> + def start_vms(self):
> + """
> + start two VM
> + """
> + self.vm_dut = []
> + self.vm = []
> + for i in range(self.vm_num):
> + vm_info = VM(self.dut, 'vm%d' % i, 'vhost_sample')
> + vm_params = {}
> + vm_params['driver'] = 'vhost-user'
> + vm_params['opt_path'] = './vhost-net%d' % (i)
> + vm_params['opt_mac'] = '52:54:00:00:00:0%d' % (i+1)
> + vm_params['opt_server'] = 'server'
> + vm_params['opt_settings'] =
> 'mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024'
> + vm_info.set_vm_device(**vm_params)
> + self.check_qemu_version(vm_info)
> +
> + try:
> + vm_dut = None
> + vm_dut = vm_info.start()
> + if vm_dut is None:
> + raise Exception("Set up VM ENV failed")
> + except Exception as e:
> + print utils.RED("Failure for %s" % str(e))
> + self.verify(vm_dut is not None, "start vm failed")
> + self.vm_dut.append(vm_dut)
> + self.vm.append(vm_info)
> +
> + def vm_testpmd_start(self):
> + """
> + start testpmd in vm
> + """
> + vm_testpmd = self.dut.target + "/app/testpmd -c 0x3 -n 4 " + \
> + "-- -i --port-topology=chained --txd=1024 --rxd=1024 "
> + for i in range(len(self.vm_dut)):
> + self.vm_dut[i].send_expect(vm_testpmd, "testpmd> ", 20)
> + self.vm_dut[i].send_expect("set fwd mac", "testpmd> ")
> + self.vm_dut[i].send_expect("start", "testpmd> ")
> +
> + self.check_link_status_after_testpmd_start(self.vhost_user)
> +
> + def stop_all_apps(self):
> + """
> + quit the testpmd in vm and stop all apps
> + """
> + for i in range(len(self.vm_dut)):
> + self.vm_dut[i].send_expect("stop", "testpmd> ", 20)
> + self.vm_dut[i].send_expect("quit", "# ", 20)
> + self.vm[i].stop()
> + self.vhost_user.send_expect("quit", "# ", 20)
> +
> + def config_vm_intf(self):
> + """
> + restore vm interfaces and config intf arp
> + """
> + for i in range(len(self.vm_dut)):
> + self.vm_dut[i].restore_interfaces()
> + time.sleep(5)
> + vm_intf = self.vm_dut[i].ports_info[0]['intf']
> + self.vm_dut[i].send_expect("ifconfig %s %s" %
> + (vm_intf, self.virtio_ip[i]), "#", 10)
> + self.vm_dut[i].send_expect("ifconfig %s up" % vm_intf, "#",
> + 10)
> +
> + self.vm_dut[0].send_expect('arp -s %s %s' %
> + (self.virtio_ip[1], self.virtio_mac[1]), '#', 10)
> + self.vm_dut[1].send_expect('arp -s %s %s' %
> + (self.virtio_ip[0],
> + self.virtio_mac[0]), '#', 10)
> +
> + def start_iperf(self):
> + """
> + start iperf
> + """
> + self.vm_dut[0].send_expect(
> + 'iperf -s -p 12345 -i 1 > iperf_server.log &', '', 10)
> + self.vm_dut[1].send_expect(
> + 'iperf -c %s -p 12345 -i 1 -t 5 > iperf_client.log &' %
> + self.virtio_ip[0], '', 60)
> + time.sleep(20)
> +
> + def iperf_result_verify(self, cycle, tinfo):
> + """
> + verify the Iperf test result
> + """
> + # copy iperf_client file from vm1
> + self.vm_dut[1].session.copy_file_from("%s/iperf_client.log" %
> + self.dut.base_dir)
> + fp = open("./iperf_client.log")
> + fmsg = fp.read()
> + fp.close()
> + iperfdata = re.compile('\S*\s*[M|G]bits/sec').findall(fmsg)
> + self.verify(len(iperfdata) != 0, "The iperf data between to vms is 0")
> + if cycle == 0:
> + cinfo = "Before reconnet"
> + else:
> + cinfo = tinfo
> + self.result_table_add(["vm2vm iperf", iperfdata[-1], cinfo])
> +
> + def send_and_verify(self, cycle=0, tinfo=""):
> + for frame_size in self.frame_sizes:
> + payload = frame_size - self.header_size
> + flow = '[Ether(dst="%s")/IP(src="%s",dst="%s")/UDP()/("X"*%d)]' % (
> + self.dst_mac, self.src1, self.dst1, payload)
> + self.tester.scapy_append('wrpcap("reconnect.pcap", %s)' % flow)
> + self.tester.scapy_execute()
> +
> + tgenInput = []
> + port = self.tester.get_local_port(self.pf)
> + tgenInput.append((port, port, "reconnect.pcap"))
> +
> + self.tester.pktgen.clear_streams()
> + streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100,
> + None, self.tester.pktgen)
> + traffic_opt = {'delay': 30, }
> + _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams,
> options=traffic_opt)
> + Mpps = pps / 1000000.0
> + self.verify(Mpps > 0, "can not receive packets of frame size %d" %
> (frame_size))
> + pct = Mpps * 100 / \
> + float(self.wirespeed(self.nic, frame_size, 1))
> + if cycle == 0:
> + data_row = [tinfo, frame_size, str(Mpps), str(pct),
> + "Before relaunch", "1"]
> + elif cycle == 1:
> + data_row = [tinfo, frame_size, str(Mpps), str(pct),
> + "After relaunch", "1"]
> + self.result_table_add(data_row)
> +
> + def test_perf_vhost_user_reconnet_one_vm(self):
> + """
> + test reconnect stability test of one vm
> + """
> + self.header_row = ["Mode", "FrameSize(B)", "Throughput(Mpps)",
> + "LineRate(%)", "Cycle", "Queue Number"]
> + self.result_table_create(self.header_row)
> + vm_cycle = 0
> + self.vm_num = 1
> + self.launch_testpmd_as_vhost_user()
> + self.start_vms()
> + self.vm_testpmd_start()
> + self.send_and_verify(vm_cycle, "reconnet one vm")
> +
> + vm_cycle = 1
> + # reconnet from vhost
> + self.logger.info('now reconnect from vhost')
> + for i in range(self.reconnect_times):
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.launch_testpmd_as_vhost_user()
> + self.send_and_verify(vm_cycle, "reconnet from vhost")
> +
> + # reconnet from qemu
> + self.logger.info('now reconnect from vm')
> + for i in range(self.reconnect_times):
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "# ")
> + self.start_vms()
> + self.vm_testpmd_start()
> + self.send_and_verify(vm_cycle, "reconnet from VM")
> + self.result_table_print()
> + self.stop_all_apps()
> +
> + def test_perf_vhost_user_reconnet_two_vms(self):
> + """
> + test reconnect stability test of two vms
> + """
> + self.header_row = ["Mode", "FrameSize(B)", "Throughput(Mpps)",
> + "LineRate(%)", "Cycle", "Queue Number"]
> + self.result_table_create(self.header_row)
> + vm_cycle = 0
> + self.vm_num = 2
> + self.launch_testpmd_as_vhost_user()
> + self.start_vms()
> + self.vm_testpmd_start()
> + self.send_and_verify(vm_cycle, "reconnet two vm")
> +
> + vm_cycle = 1
> + # reconnet from vhost
> + self.logger.info('now reconnect from vhost')
> + for i in range(self.reconnect_times):
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.launch_testpmd_as_vhost_user()
> + self.send_and_verify(vm_cycle, "reconnet from vhost")
> +
> + # reconnet from qemu
> + self.logger.info('now reconnect from vm')
> + for i in range(self.reconnect_times):
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "# ")
> + self.start_vms()
> + self.vm_testpmd_start()
> + self.send_and_verify(vm_cycle, "reconnet from VM")
> + self.result_table_print()
> + self.stop_all_apps()
> +
> + def test_perf_vhost_vm2vm_virtio_net_reconnet_two_vms(self):
> + """
> + test the iperf traffice can resume after reconnet
> + """
> + self.header_row = ["Mode", "[M|G]bits/sec", "Cycle"]
> + self.result_table_create(self.header_row)
> + self.vm_num = 2
> + vm_cycle = 0
> + self.launch_testpmd_as_vhost_user_with_no_pci()
> + self.start_vms()
> + self.config_vm_intf()
> + self.start_iperf()
> + self.iperf_result_verify(vm_cycle, 'before reconnet')
> +
> + vm_cycle = 1
> + # reconnet from vhost
> + self.logger.info('now reconnect from vhost')
> + for i in range(self.reconnect_times):
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.launch_testpmd_as_vhost_user_with_no_pci()
> + self.start_iperf()
> + self.iperf_result_verify(vm_cycle, 'reconnet from vhost')
> +
> + # reconnet from VM
> + self.logger.info('now reconnect from vm')
> + for i in range(self.reconnect_times):
> + self.vm_dut[0].send_expect('rm iperf_server.log', '# ', 10)
> + self.vm_dut[1].send_expect('rm iperf_client.log', '# ', 10)
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "# ")
> + self.start_vms()
> + self.config_vm_intf()
> + self.start_iperf()
> + self.iperf_result_verify(vm_cycle, 'reconnet from vm')
> + self.result_table_print()
> +
> + def tear_down(self):
> + #
> + # Run after each test case.
> + #
> + self.dut.send_expect("killall -s INT testpmd", "# ")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "# ")
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> --
> 2.7.4
prev parent reply other threads:[~2019-08-07 3:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-16 1:11 lihong
2019-07-17 6:18 ` Wang, Yinan
2019-07-17 6:22 ` Ma, LihongX
2019-08-07 3:44 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BAFECE4@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=lihongx.ma@intel.com \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).