* [dts] [PATCH v1] Update cryptodev test plan for latency test and verify test
@ 2019-08-12 6:25 Chen, Zhaoyan
2019-08-12 7:08 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Chen, Zhaoyan @ 2019-08-12 6:25 UTC (permalink / raw)
To: dts; +Cc: Chen, Zhaoyan
Update cryptodev test plan for latency test and verify test
by crypto-perf application.
---
.../crypto_perf_cryptodev_perf_test_plan.rst | 74 +++++++++++++++----
1 file changed, 61 insertions(+), 13 deletions(-)
diff --git a/test_plans/crypto_perf_cryptodev_perf_test_plan.rst b/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
index 00b4cd7..4975934 100644
--- a/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
+++ b/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
@@ -273,41 +273,89 @@ The test commands of test_crypto_perf is below::
./build/app/dpdk-test-crypto-perf -c COREMASK --vdev (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) -w (PCI:DEVICE:FUNCTION) -w (PCI:DEVICE:FUNCTION) -- --ptest (throughput|latency) --devtype (crypto_aesni_mb|crypto_qat|crypto_aes_gcm|crypto_openssl|crypto_snow3g|crypto_kasumi|crypto_zuc|crypto_null) --optype (aead|cipher-only|auth-only|cipher-then-auth|auth-then-cipher) --cipher-algo (ALGO) --cipher-op (encrypt|decrypt) --cipher-key-sz (key_size) --cipher-iv-sz (iv_size) --auth-algo (ALGO) --auth-op (generate|verify) --auth-key-sz (key_size) --auth-aad-sz (aad_size) --auth-digest-sz (digest_size) --total-ops (ops_number) --burst-sz (burst_size) --buffer-sz (buffer_size)
+Common::
+ --vdev (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) this value can be set as : crypto_aesni_mb_pmd, crypto_aes_gcm_pmd, crypto_openssl_pmd, crypto_snow3g_pmd, crypto_kasumi_pmd, crypto_zuc_pmd or crypto_null_pmd. If pmd is QAT this parameter should not be set.
-Test case: Cryptodev performance test
-=====================================
+ -w (PCI:DEVICE:FUNCTION) whitelist, specify the network interfaces or/and QAT devices that will be used by test application.
-common::
+ --optype (aead|cipher-only|auth-only|cipher-then-auth|auth-then-cipher): if cipher-algo is aes-gcm or gmac this value must be set to aead. Otherwise, it will be set to others. Notice, null algorithm only support cipher-only test.
- --vdev (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) this value can be set as : crypto_aesni_mb_pmd, crypto_aes_gcm_pmd, crypto_openssl_pmd, crypto_snow3g_pmd, crypto_kasumi_pmd, crypto_zuc_pmd or crypto_null_pmd . if pmd is QAT this parameter should not be set
+ --ptest (throughput/latency/verify) set test type.
- -w (PCI:DEVICE:FUNCTION) this value is the port whitelist or QAT device whitelist . if vdev is set and devtype is not crypto_qat , the QAT device whitelist is not needed , but you also can set it on the cmd line .
+Other parameters please reference above table's parameter.
- --optype (aead|cipher-only|auth-only|cipher-then-auth|auth-then-cipher): if cipher-algo is aes-gcm or gmac this value must be set to aead . otherwise it will be set to others. please notice , null algorithm only support cipher-only test.
-other parameters please reference above table's parameter .
+Test Case 01: Cryptodev Thoughput Performance Test
+==================================================
-QAT PMD Command line Eg::
+QAT PMD command line::
./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf -w 0000:1a:01.0 -- --ptest throughput --devtype crypto_qat --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
-AESNI_MB PMD Command line Eg::
+AESNI_MB PMD command line::
./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_mb_pmd -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
-AESNI_GCM PMD Command line Eg::
+AESNI_GCM PMD command line::
./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_gcm_pmd -- --ptest throughput --devtype crypto_aesni_gcm --optype aead --cipher-algo aes-gcm --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 12 --auth-algo aes-gcm --auth-op generate --auth-key-sz 16 --auth-aad-sz 4 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
-KASUMI PMD Command line Eg::
+KASUMI PMD command line::
./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev crypto_kasumi_pmd -- --ptest throughput --devtype crypto_kasumi --optype cipher-then-auth --cipher-algo kasumi-f8 --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 8 --auth-algo kasumi-f9 --auth-op generate --auth-key-sz 16 --auth-aad-sz 8 --auth-digest-sz 4 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
-SNOW3G PMD Command line Eg::
+SNOW3G PMD command line::
./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev crypto_snow3g_pmd -- --ptest throughput --devtype crypto_snow3g --optype cipher-then-auth --cipher-algo snow3g-uea2 --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo snow3g-uia2 --auth-op generate --auth-key-sz 16 --auth-aad-sz 16 --auth-digest-sz 4 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
-ZUC PMD Command line Eg::
+ZUC PMD command line::
./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev crypto_zuc_pmd -- --ptest throughput --devtype crypto_zuc_mb --optype cipher-then-auth --cipher-algo zuc-eea3 --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo zuc-eia3 --auth-op generate --auth-key-sz 16 --auth-aad-sz 16 --auth-digest-sz 4 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
+
+
+Test Case 02: Cryptodev Latency Performance Test
+================================================
+
+AESNI_MB PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4 --vdev crypto_aesni_mb1 --vdev crypto_aesni_mb2 -w 0000:1a:01.0 -- --devtype crypto_aesni_mb --cipher-algo aes-cbc --cipher-key-sz 16 --cipher-iv-sz 16 --cipher-op encrypt --optype cipher-only --silent --ptest latency --total-ops 10
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4 --vdev crypto_aesni_mb1 --vdev crypto_aesni_mb2 -w 0000:1a:01.0 -- --ptest latency --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64
+
+
+AESNI_GCM PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 10,11 -n 4 --vdev crypto_aesni_gcm_pmd_1 -- --aead-key-sz 16 --buffer-sz 64 --optype aead --ptest latency --aead-aad-sz 16 --devtype crypto_aesni_gcm --aead-op encrypt --burst-sz 32 --total-ops 10000000 --silent --digest-sz 16 --aead-algo aes-gcm --aead-iv-sz 12
+
+
+QAT PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4 -w 0000:1a:01.0 -w 0000:1a:01.1 -w 0000:1a:01.2 -- --devtype crypto_qat --cipher-algo aes-cbc --cipher-key-sz 16 --cipher-iv-sz 16 --cipher-op encrypt --optype cipher-only --silent --ptest latency --total-ops 10
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4 -w 0000:1a:01.0 -w 0000:1a:01.1 -w 0000:1a:01.2 -- --ptest latency --devtype crypto_qat --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 10,11 -n 4 -w 0000:1a:01.0 -- --aead-key-sz 16 --buffer-sz 64 --optype aead --ptest latency --aead-aad-sz 16 --devtype crypto_qat --aead-op encrypt --burst-sz 32 --total-ops 10000000 --silent --digest-sz 16 --aead-algo aes-gcm --aead-iv-sz 12
+
+
+Test Case 03: Cryptodev Verify Performance Test
+===============================================
+
+For verify operation, you need to specify a vector file by --test-file option. Please check details at http://doc.dpdk.org/guides/tools/cryptoperf.html
+
+AESNI_MB PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf --vdev crypto_aesni_mb_pmd_1 -l 9,10 -n 6 -- --buffer-sz 32 --optype cipher-then-auth --ptest verify --auth-key-sz 64 --cipher-key-sz 32 --devtype crypto_aesni_mb --cipher-iv-sz 16 --auth-op generate --burst-sz 32 --total-ops 10000000 --silent --digest-sz 12 --auth-algo sha1-hmac --cipher-algo aes-cbc --cipher-op encrypt --test-name sha1_hmac_buff_32 --test-file test_aes_cbc.data
+
+QAT PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -w 0000:1a:01.0 -l 9,10 -n 6 -- --buffer-sz 32 --optype cipher-then-auth --ptest verify --auth-key-sz 64 --cipher-key-sz 32 --devtype crypto_qat --cipher-iv-sz 16 --auth-op generate --burst-sz 32 --total-ops 30000000 --silent --digest-sz 20 --auth-algo sha1-hmac --cipher-algo aes-cbc --cipher-op encrypt --test-name sha1_hmac_buff_32 --test-file test_aes_cbc.data
+
+OPENSSL PMD and QAT PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4 --vdev crypto_openssl -w 0000:1a:01.0 -- --devtype crypto_openssl --aead-algo aes-gcm --aead-key-sz 16 --aead-iv-sz 12 --aead-op encrypt --aead-aad-sz 16 --digest-sz 16 --optype aead --silent --ptest verify --burst-sz 32 --buffer-sz 32 --total-ops 10 --test-name aes_gcm_buff_32 --test-file test_aes_gcm.data
+
+OPENSSL PMD command line::
+
+ ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4 --vdev crypto_openssl -- --devtype crypto_openssl --aead-algo aes-gcm --aead-key-sz 16 --aead-iv-sz 12 --aead-op encrypt --aead-aad-sz 16 --digest-sz 16 --optype aead --silent --ptest verify --burst-sz 32 --buffer-sz 32 --total-ops 10 --test-name aes_gcm_buff_32 --test-file test_aes_gcm.data
+
--
2.22.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] Update cryptodev test plan for latency test and verify test
2019-08-12 6:25 [dts] [PATCH v1] Update cryptodev test plan for latency test and verify test Chen, Zhaoyan
@ 2019-08-12 7:08 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-08-12 7:08 UTC (permalink / raw)
To: Chen, Zhaoyan, dts; +Cc: Chen, Zhaoyan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Chen, Zhaoyan
> Sent: Monday, August 12, 2019 2:25 PM
> To: dts@dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>
> Subject: [dts] [PATCH v1] Update cryptodev test plan for latency test and
> verify test
>
> Update cryptodev test plan for latency test and verify test by crypto-perf
> application.
>
> ---
> .../crypto_perf_cryptodev_perf_test_plan.rst | 74 +++++++++++++++----
> 1 file changed, 61 insertions(+), 13 deletions(-)
>
> diff --git a/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
> b/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
> index 00b4cd7..4975934 100644
> --- a/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
> +++ b/test_plans/crypto_perf_cryptodev_perf_test_plan.rst
> @@ -273,41 +273,89 @@ The test commands of test_crypto_perf is below::
>
> ./build/app/dpdk-test-crypto-perf -c COREMASK --vdev
> (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) -w
> (PCI:DEVICE:FUNCTION) -w (PCI:DEVICE:FUNCTION) -- --ptest
> (throughput|latency) --devtype
> (crypto_aesni_mb|crypto_qat|crypto_aes_gcm|crypto_openssl|crypto_snow
> 3g|crypto_kasumi|crypto_zuc|crypto_null) --optype (aead|cipher-only|auth-
> only|cipher-then-auth|auth-then-cipher) --cipher-algo (ALGO) --cipher-op
> (encrypt|decrypt) --cipher-key-sz (key_size) --cipher-iv-sz (iv_size) --auth-algo
> (ALGO) --auth-op (generate|verify) --auth-key-sz (key_size) --auth-aad-sz
> (aad_size) --auth-digest-sz (digest_size) --total-ops (ops_number) --burst-sz
> (burst_size) --buffer-sz (buffer_size)
>
> +Common::
>
> + --vdev
> (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) this
> value can be set as : crypto_aesni_mb_pmd, crypto_aes_gcm_pmd,
> crypto_openssl_pmd, crypto_snow3g_pmd, crypto_kasumi_pmd,
> crypto_zuc_pmd or crypto_null_pmd. If pmd is QAT this parameter should
> not be set.
>
> -Test case: Cryptodev performance test
> -=====================================
> + -w (PCI:DEVICE:FUNCTION) whitelist, specify the network interfaces
> or/and QAT devices that will be used by test application.
>
> -common::
> + --optype (aead|cipher-only|auth-only|cipher-then-auth|auth-then-
> cipher): if cipher-algo is aes-gcm or gmac this value must be set to aead.
> Otherwise, it will be set to others. Notice, null algorithm only support cipher-
> only test.
>
> - --vdev
> (AESNI_MB|QAT|AESNI_GCM|OPENSSL|SNOW3G|KASUMI|ZUC|NULL) this
> value can be set as : crypto_aesni_mb_pmd, crypto_aes_gcm_pmd,
> crypto_openssl_pmd, crypto_snow3g_pmd, crypto_kasumi_pmd,
> crypto_zuc_pmd or crypto_null_pmd . if pmd is QAT this parameter should
> not be set
> + --ptest (throughput/latency/verify) set test type.
>
> - -w (PCI:DEVICE:FUNCTION) this value is the port whitelist or QAT device
> whitelist . if vdev is set and devtype is not crypto_qat , the QAT device
> whitelist is not needed , but you also can set it on the cmd line .
> +Other parameters please reference above table's parameter.
>
> - --optype (aead|cipher-only|auth-only|cipher-then-auth|auth-then-
> cipher): if cipher-algo is aes-gcm or gmac this value must be set to aead .
> otherwise it will be set to others. please notice , null algorithm only support
> cipher-only test.
>
> -other parameters please reference above table's parameter .
> +Test Case 01: Cryptodev Thoughput Performance Test
> +==================================================
>
> -QAT PMD Command line Eg::
> +QAT PMD command line::
>
> ./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf -w 0000:1a:01.0 -
> - --ptest throughput --devtype crypto_qat --optype cipher-then-auth --
> cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --
> auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-aad-sz 0 --
> auth-digest-sz 20 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
>
> -AESNI_MB PMD Command line Eg::
> +AESNI_MB PMD command line::
>
> ./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev
> crypto_aesni_mb_pmd -- --ptest throughput --devtype crypto_aesni_mb --
> optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-
> key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-
> key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --burst-sz
> 32 --buffer-sz 1024
>
> -AESNI_GCM PMD Command line Eg::
> +AESNI_GCM PMD command line::
>
> ./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev
> crypto_aesni_gcm_pmd -- --ptest throughput --devtype crypto_aesni_gcm --
> optype aead --cipher-algo aes-gcm --cipher-op encrypt --cipher-key-sz 16 --
> cipher-iv-sz 12 --auth-algo aes-gcm --auth-op generate --auth-key-sz 16 --
> auth-aad-sz 4 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-
> sz 1024
>
> -KASUMI PMD Command line Eg::
> +KASUMI PMD command line::
>
> ./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev
> crypto_kasumi_pmd -- --ptest throughput --devtype crypto_kasumi --optype
> cipher-then-auth --cipher-algo kasumi-f8 --cipher-op encrypt --cipher-key-sz
> 16 --cipher-iv-sz 8 --auth-algo kasumi-f9 --auth-op generate --auth-key-sz 16 --
> auth-aad-sz 8 --auth-digest-sz 4 --total-ops 10000000 --burst-sz 32 --buffer-sz
> 1024
>
> -SNOW3G PMD Command line Eg::
> +SNOW3G PMD command line::
>
> ./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev
> crypto_snow3g_pmd -- --ptest throughput --devtype crypto_snow3g --
> optype cipher-then-auth --cipher-algo snow3g-uea2 --cipher-op encrypt --
> cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo snow3g-uia2 --auth-op generate
> --auth-key-sz 16 --auth-aad-sz 16 --auth-digest-sz 4 --total-ops 10000000 --
> burst-sz 32 --buffer-sz 1024
>
> -ZUC PMD Command line Eg::
> +ZUC PMD command line::
>
> ./build/app/test-crypto-perf/dpdk-test-crypto-perf -c 0xf --vdev
> crypto_zuc_pmd -- --ptest throughput --devtype crypto_zuc_mb --optype
> cipher-then-auth --cipher-algo zuc-eea3 --cipher-op encrypt --cipher-key-sz
> 16 --cipher-iv-sz 16 --auth-algo zuc-eia3 --auth-op generate --auth-key-sz 16 -
> -auth-aad-sz 16 --auth-digest-sz 4 --total-ops 10000000 --burst-sz 32 --buffer-
> sz 1024
> +
> +
> +Test Case 02: Cryptodev Latency Performance Test
> +================================================
> +
> +AESNI_MB PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4
> + --vdev crypto_aesni_mb1 --vdev crypto_aesni_mb2 -w 0000:1a:01.0 --
> + --devtype crypto_aesni_mb --cipher-algo aes-cbc --cipher-key-sz 16
> + --cipher-iv-sz 16 --cipher-op encrypt --optype cipher-only --silent
> + --ptest latency --total-ops 10
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4
> + --vdev crypto_aesni_mb1 --vdev crypto_aesni_mb2 -w 0000:1a:01.0 --
> + --ptest latency --devtype crypto_aesni_mb --optype cipher-then-auth
> + --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16
> + --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --digest-sz
> + 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64
> +
> +
> +AESNI_GCM PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 10,11 -n 4
> + --vdev crypto_aesni_gcm_pmd_1 -- --aead-key-sz 16 --buffer-sz 64
> + --optype aead --ptest latency --aead-aad-sz 16 --devtype
> + crypto_aesni_gcm --aead-op encrypt --burst-sz 32 --total-ops 10000000
> + --silent --digest-sz 16 --aead-algo aes-gcm --aead-iv-sz 12
> +
> +
> +QAT PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4
> + -w 0000:1a:01.0 -w 0000:1a:01.1 -w 0000:1a:01.2 -- --devtype
> + crypto_qat --cipher-algo aes-cbc --cipher-key-sz 16 --cipher-iv-sz 16
> + --cipher-op encrypt --optype cipher-only --silent --ptest latency
> + --total-ops 10
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4
> +-w 0000:1a:01.0 -w 0000:1a:01.1 -w 0000:1a:01.2 -- --ptest latency
> +--devtype crypto_qat --optype cipher-then-auth --cipher-algo aes-cbc
> +--cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op
> +generate --auth-key-sz 64 --digest-sz 12 --total-ops 10000000
> +--burst-sz 32 --buffer-sz 64
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 10,11 -n 4 -w
> +0000:1a:01.0 -- --aead-key-sz 16 --buffer-sz 64 --optype aead --ptest
> +latency --aead-aad-sz 16 --devtype crypto_qat --aead-op encrypt
> +--burst-sz 32 --total-ops 10000000 --silent --digest-sz 16 --aead-algo
> +aes-gcm --aead-iv-sz 12
> +
> +
> +Test Case 03: Cryptodev Verify Performance Test
> +===============================================
> +
> +For verify operation, you need to specify a vector file by --test-file
> +option. Please check details at
> +http://doc.dpdk.org/guides/tools/cryptoperf.html
> +
> +AESNI_MB PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf --vdev
> + crypto_aesni_mb_pmd_1 -l 9,10 -n 6 -- --buffer-sz 32 --optype
> + cipher-then-auth --ptest verify --auth-key-sz 64 --cipher-key-sz 32
> + --devtype crypto_aesni_mb --cipher-iv-sz 16 --auth-op generate
> + --burst-sz 32 --total-ops 10000000 --silent --digest-sz 12
> + --auth-algo sha1-hmac --cipher-algo aes-cbc --cipher-op encrypt
> + --test-name sha1_hmac_buff_32 --test-file test_aes_cbc.data
> +
> +QAT PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -w 0000:1a:01.0 -l
> +9,10 -n 6 -- --buffer-sz 32 --optype cipher-then-auth --ptest verify
> +--auth-key-sz 64 --cipher-key-sz 32 --devtype crypto_qat --cipher-iv-sz
> +16 --auth-op generate --burst-sz 32 --total-ops 30000000 --silent
> +--digest-sz 20 --auth-algo sha1-hmac --cipher-algo aes-cbc --cipher-op
> +encrypt --test-name sha1_hmac_buff_32 --test-file test_aes_cbc.data
> +
> +OPENSSL PMD and QAT PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4
> + --vdev crypto_openssl -w 0000:1a:01.0 -- --devtype crypto_openssl
> + --aead-algo aes-gcm --aead-key-sz 16 --aead-iv-sz 12 --aead-op encrypt
> + --aead-aad-sz 16 --digest-sz 16 --optype aead --silent --ptest verify
> + --burst-sz 32 --buffer-sz 32 --total-ops 10 --test-name
> + aes_gcm_buff_32 --test-file test_aes_gcm.data
> +
> +OPENSSL PMD command line::
> +
> + ./build/app/test-crypto-perf/dpdk-test-crypto-perf -l 9,10,11,12 -n 4
> + --vdev crypto_openssl -- --devtype crypto_openssl --aead-algo aes-gcm
> + --aead-key-sz 16 --aead-iv-sz 12 --aead-op encrypt --aead-aad-sz 16
> + --digest-sz 16 --optype aead --silent --ptest verify --burst-sz 32
> + --buffer-sz 32 --total-ops 10 --test-name aes_gcm_buff_32 --test-file
> + test_aes_gcm.data
> +
> --
> 2.22.0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-12 7:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-12 6:25 [dts] [PATCH v1] Update cryptodev test plan for latency test and verify test Chen, Zhaoyan
2019-08-12 7:08 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).