* [dts] [PATCH] TestSuite_vlan_ethertype_config.py: only tpid 0x8100 is supported for cavium_a064
@ 2019-08-12 8:05 nareddy
2019-08-21 9:29 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: nareddy @ 2019-08-12 8:05 UTC (permalink / raw)
To: dts; +Cc: fmasood, avijay, Praneeth Reddy
From: Praneeth Reddy <nareddy@marvell.com>
Only tpid 0x8100 is supported for cavium_a064
Signed-off-by: Praneeth Reddy <nareddy@marvell.com>
---
tests/TestSuite_vlan_ethertype_config.py | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py
index 1cb1083..16063a4 100644
--- a/tests/TestSuite_vlan_ethertype_config.py
+++ b/tests/TestSuite_vlan_ethertype_config.py
@@ -199,7 +199,7 @@ class TestVlanEthertypeConfig(TestCase):
dutRxPortId, "testpmd> ", 20)
rx_vlans = [1, random_vlan, MAX_VLAN]
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic == "cavium_a063":
+ if (self.nic in ["cavium_a063", "cavium_a064"]):
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
@@ -231,7 +231,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("start", "testpmd> ")
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic == "cavium_a063":
+ if (self.nic in ["cavium_a063", "cavium_a064"]):
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
@@ -263,7 +263,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("start", "testpmd> ", 20)
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic == "cavium_a063":
+ if (self.nic in ["cavium_a063", "cavium_a064"]):
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
@@ -292,7 +292,7 @@ class TestVlanEthertypeConfig(TestCase):
self.dut.send_expect("start", "testpmd> ")
# caium_a063 card support only default '0x8100' tpid in rx mode
- if self.nic == "cavium_a063":
+ if (self.nic in ["cavium_a063", "cavium_a064"]):
tpids = [0x8100]
else:
tpids = [0x8100, 0xA100]
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH] TestSuite_vlan_ethertype_config.py: only tpid 0x8100 is supported for cavium_a064
2019-08-12 8:05 [dts] [PATCH] TestSuite_vlan_ethertype_config.py: only tpid 0x8100 is supported for cavium_a064 nareddy
@ 2019-08-21 9:29 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-08-21 9:29 UTC (permalink / raw)
To: nareddy, dts; +Cc: fmasood, avijay
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of
> nareddy@marvell.com
> Sent: Monday, August 12, 2019 4:05 PM
> To: dts@dpdk.org
> Cc: fmasood@marvell.com; avijay@marvell.com; Praneeth Reddy
> <nareddy@marvell.com>
> Subject: [dts] [PATCH] TestSuite_vlan_ethertype_config.py: only tpid 0x8100
> is supported for cavium_a064
>
> From: Praneeth Reddy <nareddy@marvell.com>
>
> Only tpid 0x8100 is supported for cavium_a064
>
> Signed-off-by: Praneeth Reddy <nareddy@marvell.com>
> ---
> tests/TestSuite_vlan_ethertype_config.py | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/tests/TestSuite_vlan_ethertype_config.py
> b/tests/TestSuite_vlan_ethertype_config.py
> index 1cb1083..16063a4 100644
> --- a/tests/TestSuite_vlan_ethertype_config.py
> +++ b/tests/TestSuite_vlan_ethertype_config.py
> @@ -199,7 +199,7 @@ class TestVlanEthertypeConfig(TestCase):
> dutRxPortId, "testpmd> ", 20)
> rx_vlans = [1, random_vlan, MAX_VLAN]
> # caium_a063 card support only default '0x8100' tpid in rx mode
> - if self.nic == "cavium_a063":
> + if (self.nic in ["cavium_a063", "cavium_a064"]):
> tpids = [0x8100]
> else:
> tpids = [0x8100, 0xA100]
> @@ -231,7 +231,7 @@ class TestVlanEthertypeConfig(TestCase):
> self.dut.send_expect("start", "testpmd> ")
>
> # caium_a063 card support only default '0x8100' tpid in rx mode
> - if self.nic == "cavium_a063":
> + if (self.nic in ["cavium_a063", "cavium_a064"]):
> tpids = [0x8100]
> else:
> tpids = [0x8100, 0xA100]
> @@ -263,7 +263,7 @@ class TestVlanEthertypeConfig(TestCase):
> self.dut.send_expect("start", "testpmd> ", 20)
>
> # caium_a063 card support only default '0x8100' tpid in rx mode
> - if self.nic == "cavium_a063":
> + if (self.nic in ["cavium_a063", "cavium_a064"]):
> tpids = [0x8100]
> else:
> tpids = [0x8100, 0xA100]
> @@ -292,7 +292,7 @@ class TestVlanEthertypeConfig(TestCase):
> self.dut.send_expect("start", "testpmd> ")
>
> # caium_a063 card support only default '0x8100' tpid in rx mode
> - if self.nic == "cavium_a063":
> + if (self.nic in ["cavium_a063", "cavium_a064"]):
> tpids = [0x8100]
> else:
> tpids = [0x8100, 0xA100]
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-21 9:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-12 8:05 [dts] [PATCH] TestSuite_vlan_ethertype_config.py: only tpid 0x8100 is supported for cavium_a064 nareddy
2019-08-21 9:29 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).