[dts] [PATCH V1] test_plans/vf_interrupt_pmd_test_plan:add a test case

[dts] [PATCH V1] test_plans/vf_interrupt_pmd_test_plan:add a test case

[zhang,yan]

1. add a test case.
2. Fix some problems.

Signed-off-by: zhang,yan <yanx.a.zhang@intel.com>
---
 test_plans/vf_interrupt_pmd_test_plan.rst | 57 +++++++++++++++++++++--
 1 file changed, 54 insertions(+), 3 deletions(-)

diff --git a/test_plans/vf_interrupt_pmd_test_plan.rst b/test_plans/vf_interrupt_pmd_test_plan.rst
index 6464ebc..8f91b14 100644
--- a/test_plans/vf_interrupt_pmd_test_plan.rst
+++ b/test_plans/vf_interrupt_pmd_test_plan.rst
@@ -71,11 +71,11 @@ in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
 Test Case1: Check Interrupt for PF with vfio driver on ixgbe and i40e
 =====================================================================
 
-1. Bind NIC PF to igb_uio drvier::
+1. Bind NIC PF to vfio-pci drvier::
 
     modprobe vfio-pci;
 
-    usertools/dpdk-devbind.py --bind=igb-uio 0000:04:00.0
+    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
 
 2. start l3fwd-power with PF::
 
@@ -99,7 +99,7 @@ Test Case2: Check Interrupt for PF with igb_uio driver on ixgbe and i40e
     modprobe uio;
     insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko;
 
-    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
+    usertools/dpdk-devbind.py --bind=igb_uio 0000:04:00.0
 
 2. start l3fwd-power with PF::
 
@@ -140,3 +140,54 @@ Test Case3: Check Interrupt for VF with vfio driver on ixgbe and i40e
 4. Check if threads on core 2 have returned to sleep mode::
 
     L3FWD_POWER: lcore 2 sleeps until interrupt triggers
+
+Test Case4: VF interrupt pmd in VM with vfio-pci
+================================================
+
+1. Generate NIC VF, then bind it to vfio drvier::
+
+    echo 1 > /sys/bus/pci/devices/0000\:04\:00.0/sriov_numvfs
+
+    modprobe vfio-pci
+    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:10.0(vf_pci)
+
+2. passthrough VF 0 to VM0 and start VM0::
+
+    taskset -c 4,5,6,7 qemu-system-x86_64 \
+    -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
+    -device e1000,netdev=nttsip1  -netdev user,id=nttsip1,hostfwd=tcp:10.240.176.207:6000-:22 \
+    -device vfio-pci,host=0000:04:02.0,id=pt_0 -cpu host -smp 4 -m 10240 \
+    -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :11 \
+    -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
+
+3. Modify the DPDK-l3fwd-power source code and recompile the l3fwd-power::
+
+    sed -i -e '/DEV_RX_OFFLOAD_CHECKSUM,/d' ./examples/l3fwd-power/main.c
+
+    export RTE_TARGET=x86_64-native-linuxapp-gcc
+    export RTE_SDK=`/root/DPDK`
+    make -C examples/l3fwd-power
+
+4. Bind VF 0 to the vfio-pci driver::
+
+    modprobe -r vfio_iommu_type1
+    modprobe -r vfio
+    modprobe vfio enable_unsafe_noiommu_mode=1
+    modprobe vfio-pci
+
+    usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0
+
+5. start l3fwd-power in VM::
+
+    examples/l3fwd-power/build/l3fwd-power -l 1-3 -n 4 -- -P -p 0x01  --config '(0,0,2)'
+
+6. Send packet with packet generator to the VM, check that thread core2 waked up::
+
+    sendp([Ether(dst='vf_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX')], iface="tester_intf")
+
+    L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 0
+
+7. Check if threads on core 2 have returned to sleep mode::
+
+    L3FWD_POWER: lcore 2 sleeps until interrupt triggers
\ No newline at end of file
-- 
2.17.2

Re: [dts] [PATCH V1] test_plans/vf_interrupt_pmd_test_plan:add a test case

[Zhang, Yuwei1]

Asked-by: Yuwei Zhang<yuwei1.zhang@intel.com>


> 在 2019年8月14日，下午5:23，Zhang, YanX A <yanx.a.zhang@intel.com> 写道：
> 
> 1. add a test case.
> 2. Fix some problems.
> 
> Signed-off-by: zhang,yan <yanx.a.zhang@intel.com>
> ---
> test_plans/vf_interrupt_pmd_test_plan.rst | 57 +++++++++++++++++++++--
> 1 file changed, 54 insertions(+), 3 deletions(-)
> 
> diff --git a/test_plans/vf_interrupt_pmd_test_plan.rst b/test_plans/vf_interrupt_pmd_test_plan.rst
> index 6464ebc..8f91b14 100644
> --- a/test_plans/vf_interrupt_pmd_test_plan.rst
> +++ b/test_plans/vf_interrupt_pmd_test_plan.rst
> @@ -71,11 +71,11 @@ in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
> Test Case1: Check Interrupt for PF with vfio driver on ixgbe and i40e
> =====================================================================
> 
> -1. Bind NIC PF to igb_uio drvier::
> +1. Bind NIC PF to vfio-pci drvier::
> 
>     modprobe vfio-pci;
> 
> -    usertools/dpdk-devbind.py --bind=igb-uio 0000:04:00.0
> +    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
> 
> 2. start l3fwd-power with PF::
> 
> @@ -99,7 +99,7 @@ Test Case2: Check Interrupt for PF with igb_uio driver on ixgbe and i40e
>     modprobe uio;
>     insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko;
> 
> -    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
> +    usertools/dpdk-devbind.py --bind=igb_uio 0000:04:00.0
> 
> 2. start l3fwd-power with PF::
> 
> @@ -140,3 +140,54 @@ Test Case3: Check Interrupt for VF with vfio driver on ixgbe and i40e
> 4. Check if threads on core 2 have returned to sleep mode::
> 
>     L3FWD_POWER: lcore 2 sleeps until interrupt triggers
> +
> +Test Case4: VF interrupt pmd in VM with vfio-pci
> +================================================
> +
> +1. Generate NIC VF, then bind it to vfio drvier::
> +
> +    echo 1 > /sys/bus/pci/devices/0000\:04\:00.0/sriov_numvfs
> +
> +    modprobe vfio-pci
> +    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:10.0(vf_pci)
> +
> +2. passthrough VF 0 to VM0 and start VM0::
> +
> +    taskset -c 4,5,6,7 qemu-system-x86_64 \
> +    -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
> +    -device e1000,netdev=nttsip1  -netdev user,id=nttsip1,hostfwd=tcp:10.240.176.207:6000-:22 \
> +    -device vfio-pci,host=0000:04:02.0,id=pt_0 -cpu host -smp 4 -m 10240 \
> +    -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
> +    -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :11 \
> +    -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
> +
> +3. Modify the DPDK-l3fwd-power source code and recompile the l3fwd-power::
> +
> +    sed -i -e '/DEV_RX_OFFLOAD_CHECKSUM,/d' ./examples/l3fwd-power/main.c
> +
> +    export RTE_TARGET=x86_64-native-linuxapp-gcc
> +    export RTE_SDK=`/root/DPDK`
> +    make -C examples/l3fwd-power
> +
> +4. Bind VF 0 to the vfio-pci driver::
> +
> +    modprobe -r vfio_iommu_type1
> +    modprobe -r vfio
> +    modprobe vfio enable_unsafe_noiommu_mode=1
> +    modprobe vfio-pci
> +
> +    usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0
> +
> +5. start l3fwd-power in VM::
> +
> +    examples/l3fwd-power/build/l3fwd-power -l 1-3 -n 4 -- -P -p 0x01  --config '(0,0,2)'
> +
> +6. Send packet with packet generator to the VM, check that thread core2 waked up::
> +
> +    sendp([Ether(dst='vf_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX')], iface="tester_intf")
> +
> +    L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue 0
> +
> +7. Check if threads on core 2 have returned to sleep mode::
> +
> +    L3FWD_POWER: lcore 2 sleeps until interrupt triggers
> \ No newline at end of file
> -- 
> 2.17.2
> 

Re: [dts] [PATCH V1] test_plans/vf_interrupt_pmd_test_plan:add a test case

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhang,yan
> Sent: Wednesday, August 14, 2019 5:28 PM
> To: dts@dpdk.org
> Cc: Zhang, Yuwei1 <yuwei1.zhang@intel.com>; Zhang, YanX A
> <yanx.a.zhang@intel.com>
> Subject: [dts] [PATCH V1] test_plans/vf_interrupt_pmd_test_plan:add a test
> case
> 
> 1. add a test case.
> 2. Fix some problems.
> 
> Signed-off-by: zhang,yan <yanx.a.zhang@intel.com>
> ---
>  test_plans/vf_interrupt_pmd_test_plan.rst | 57 +++++++++++++++++++++--
>  1 file changed, 54 insertions(+), 3 deletions(-)
> 
> diff --git a/test_plans/vf_interrupt_pmd_test_plan.rst
> b/test_plans/vf_interrupt_pmd_test_plan.rst
> index 6464ebc..8f91b14 100644
> --- a/test_plans/vf_interrupt_pmd_test_plan.rst
> +++ b/test_plans/vf_interrupt_pmd_test_plan.rst
> @@ -71,11 +71,11 @@ in bios. When used vfio, requested to insmod two
> drivers vfio and vfio-pci.
>  Test Case1: Check Interrupt for PF with vfio driver on ixgbe and i40e
> ================================================================
> =====
> 
> -1. Bind NIC PF to igb_uio drvier::
> +1. Bind NIC PF to vfio-pci drvier::
> 
>      modprobe vfio-pci;
> 
> -    usertools/dpdk-devbind.py --bind=igb-uio 0000:04:00.0
> +    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
> 
>  2. start l3fwd-power with PF::
> 
> @@ -99,7 +99,7 @@ Test Case2: Check Interrupt for PF with igb_uio driver
> on ixgbe and i40e
>      modprobe uio;
>      insmod x86_64-native-linuxapp-gcc/kmod/igb_uio.ko;
> 
> -    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:00.0
> +    usertools/dpdk-devbind.py --bind=igb_uio 0000:04:00.0
> 
>  2. start l3fwd-power with PF::
> 
> @@ -140,3 +140,54 @@ Test Case3: Check Interrupt for VF with vfio driver
> on ixgbe and i40e  4. Check if threads on core 2 have returned to sleep
> mode::
> 
>      L3FWD_POWER: lcore 2 sleeps until interrupt triggers
> +
> +Test Case4: VF interrupt pmd in VM with vfio-pci
> +================================================
> +
> +1. Generate NIC VF, then bind it to vfio drvier::
> +
> +    echo 1 > /sys/bus/pci/devices/0000\:04\:00.0/sriov_numvfs
> +
> +    modprobe vfio-pci
> +    usertools/dpdk-devbind.py --bind=vfio-pci 0000:04:10.0(vf_pci)
> +
> +2. passthrough VF 0 to VM0 and start VM0::
> +
> +    taskset -c 4,5,6,7 qemu-system-x86_64 \
> +    -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid -daemonize -monitor
> unix:/tmp/vm0_monitor.sock,server,nowait \
> +    -device e1000,netdev=nttsip1  -netdev
> user,id=nttsip1,hostfwd=tcp:10.240.176.207:6000-:22 \
> +    -device vfio-pci,host=0000:04:02.0,id=pt_0 -cpu host -smp 4 -m 10240 \
> +    -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -
> device virtio-serial \
> +    -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -
> vnc :11 \
> +    -drive
> + file=/home/image/ubuntu16-
> 0.img,format=qcow2,if=virtio,index=0,media=d
> + isk
> +
> +3. Modify the DPDK-l3fwd-power source code and recompile the l3fwd-
> power::
> +
> +    sed -i -e '/DEV_RX_OFFLOAD_CHECKSUM,/d'
> + ./examples/l3fwd-power/main.c
> +
> +    export RTE_TARGET=x86_64-native-linuxapp-gcc
> +    export RTE_SDK=`/root/DPDK`
> +    make -C examples/l3fwd-power
> +
> +4. Bind VF 0 to the vfio-pci driver::
> +
> +    modprobe -r vfio_iommu_type1
> +    modprobe -r vfio
> +    modprobe vfio enable_unsafe_noiommu_mode=1
> +    modprobe vfio-pci
> +
> +    usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0
> +
> +5. start l3fwd-power in VM::
> +
> +    examples/l3fwd-power/build/l3fwd-power -l 1-3 -n 4 -- -P -p 0x01  --config
> '(0,0,2)'
> +
> +6. Send packet with packet generator to the VM, check that thread core2
> waked up::
> +
> +
> + sendp([Ether(dst='vf_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX')],
> + iface="tester_intf")
> +
> +    L3FWD_POWER: lcore 2 is waked up from rx interrupt on port 0 queue
> + 0
> +
> +7. Check if threads on core 2 have returned to sleep mode::
> +
> +    L3FWD_POWER: lcore 2 sleeps until interrupt triggers
> \ No newline at end of file
> --
> 2.17.2