* [dts] [PATCH V4] tests/TestSuite_nvgre: Enable CVL25Gand100gNIC and change no vec model configuration
@ 2019-08-29 7:44 zhiwei.he
2019-08-30 3:05 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: zhiwei.he @ 2019-08-29 7:44 UTC (permalink / raw)
To: dts; +Cc: zhiwei.he
From: "zhiwei.he" <zhiwei.he@intel.com>
Signed-off-by: zhiwei.he <zhiwei.he@intel.com>
---
tests/TestSuite_nvgre.py | 86 ++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 73 insertions(+), 13 deletions(-)
diff --git a/tests/TestSuite_nvgre.py b/tests/TestSuite_nvgre.py
index b0500cc..58335f9 100644
--- a/tests/TestSuite_nvgre.py
+++ b/tests/TestSuite_nvgre.py
@@ -365,6 +365,8 @@ class TestNvgre(TestCase):
self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
elif self.nic in ["sageville", "sagepond"]:
self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
+ elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
else:
self.verify(False, "%s not support NVGRE case" % self.nic)
# Based on h/w type, choose how many ports to use
@@ -616,19 +618,73 @@ class TestNvgre(TestCase):
# verify saved pcap checksum same to expected checksum
for key in chksums_default:
self.verify(chksums[key] == chksums_default[key], "%s not matched to %s" % (key, chksums_default[key]))
-
+ def test_nvgre_ipv6(self):
+ """
+ verify nvgre packet with ipv6
+ """
+ # check no nvgre packet
+ self.nvgre_detect(outer_l3_type = "IPv6", outer_ip_proto=0xFF)
+ # check nvgre + IPv6 inner packet
+ self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6", inner_l4_type='None')
+ # check nvgre + TCP inner packet
+ self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6", inner_l4_type='TCP')
+ # check nvgre + SCTP inner packet
+ self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6", inner_l4_type='SCTP')
+ # check nvgre + UDP inner packet
+ self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6", inner_l4_type='UDP')
+ # check nvgre + vlan outer packet
+ self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6", outer_vlan=1)
+ # check vlan nvgre + vlan inner and outer packet
+ self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6", outer_vlan=1, inner_vlan=1)
+
+ def test_nvgre_ipv6_checksum_offload(self):
+ # check nvgre packet + inner IPv6 + inner L4 invalid
+ self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1)
+ # check nvgre packet + outer IPv6 + inner L4 invalid
+ self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1)
+ # check nvgre packet + inner + outer ipv6 + inner L4 invalid
+ self.nvgre_checksum(outer_l3_type = "IPv6", inner_l3_type= "IPv6", inner_l4_invalid=1)
+ # check nvgre packet + inner IPv6 + tcp checksum invalid
+ self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1, inner_l4_type='TCP')
+ #check nvgre packet + inner IPv6 + sctp checksum invalid
+ self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1, inner_l4_type='SCTP')
+ #check nvgre packet + inner IPv6 + UDP checksum invalid
+ self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1, inner_l4_type='UDP')
+ # check nvgre packet + outer IPv6 + inner tcp checksum invalid
+ self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1, inner_l4_type='TCP')
+ #check nvgre packet + outer IPv6 + inner sctp checksum invalid
+ self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1, inner_l4_type='SCTP')
+ #check nvgre packet + outer IPv6 + inner UDP checksum invalid
+ self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1, inner_l4_type='UDP')
+ # check vlan nvgre packet + inner vlan + inner udp checksum invalid
+ self.nvgre_checksum(inner_l3_type="IPv6", inner_vlan=1, inner_l4_invalid=1, inner_l4_type='UDP')
+ # check vlan nvgre packet + outer vlan + inner udp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6", outer_vlan=1, inner_l4_invalid=1, inner_l4_type='UDP')
+ # check vlan nvgre packet + outer vlan + inner tcp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6", outer_vlan=1, inner_l4_invalid=1, inner_l4_type='TCP')
+ # check vlan nvgre packet + inner vlan + inner tcp checksum invalid
+ self.nvgre_checksum(inner_l3_type="IPv6", inner_vlan=1, inner_l4_invalid=1, inner_l4_type='TCP')
+ # check vlan nvgre packet + inner vlan + inner sctp checksum invalid
+ self.nvgre_checksum(inner_l3_type="IPv6", inner_vlan=1, inner_l4_invalid=1, inner_l4_type='SCTP')
+ # check vlan nvgre packet + outer vlan + inner sctp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6", outer_vlan=1, inner_l4_invalid=1, inner_l4_type='SCTP')
+
def test_nvgre_ipv4(self):
"""
verify nvgre packet with ipv4
"""
# packet type detect must used without VECTOR pmd
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model == 'y':
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model == 'y':
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
# check no nvgre packet
self.nvgre_detect(outer_ip_proto=0xFF)
@@ -642,13 +698,17 @@ class TestNvgre(TestCase):
self.nvgre_detect(outer_vlan=1)
# check vlan nvgre + vlan inner packet
self.nvgre_detect(outer_vlan=1, inner_vlan=1)
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model != dst_vec_model:
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model != dst_vec_model:
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
def test_tunnel_filter(self):
# verify tunnel filter feature
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH V4] tests/TestSuite_nvgre: Enable CVL25Gand100gNIC and change no vec model configuration
2019-08-29 7:44 [dts] [PATCH V4] tests/TestSuite_nvgre: Enable CVL25Gand100gNIC and change no vec model configuration zhiwei.he
@ 2019-08-30 3:05 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-08-30 3:05 UTC (permalink / raw)
To: He, Zhiwei, dts; +Cc: He, Zhiwei
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhiwei.he
> Sent: Thursday, August 29, 2019 3:44 PM
> To: dts@dpdk.org
> Cc: He, Zhiwei <zhiwei.he@intel.com>
> Subject: [dts] [PATCH V4] tests/TestSuite_nvgre: Enable CVL25Gand100gNIC
> and change no vec model configuration
>
> From: "zhiwei.he" <zhiwei.he@intel.com>
>
> Signed-off-by: zhiwei.he <zhiwei.he@intel.com>
> ---
> tests/TestSuite_nvgre.py | 86
> ++++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 73 insertions(+), 13 deletions(-)
>
> diff --git a/tests/TestSuite_nvgre.py b/tests/TestSuite_nvgre.py index
> b0500cc..58335f9 100644
> --- a/tests/TestSuite_nvgre.py
> +++ b/tests/TestSuite_nvgre.py
> @@ -365,6 +365,8 @@ class TestNvgre(TestCase):
> self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
> elif self.nic in ["sageville", "sagepond"]:
> self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
> + elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> else:
> self.verify(False, "%s not support NVGRE case" % self.nic)
> # Based on h/w type, choose how many ports to use @@ -616,19
> +618,73 @@ class TestNvgre(TestCase):
> # verify saved pcap checksum same to expected checksum
> for key in chksums_default:
> self.verify(chksums[key] == chksums_default[key], "%s not matched
> to %s" % (key, chksums_default[key]))
> -
> + def test_nvgre_ipv6(self):
> + """
> + verify nvgre packet with ipv6
> + """
> + # check no nvgre packet
> + self.nvgre_detect(outer_l3_type = "IPv6", outer_ip_proto=0xFF)
> + # check nvgre + IPv6 inner packet
> + self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6",
> inner_l4_type='None')
> + # check nvgre + TCP inner packet
> + self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6",
> inner_l4_type='TCP')
> + # check nvgre + SCTP inner packet
> + self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6",
> inner_l4_type='SCTP')
> + # check nvgre + UDP inner packet
> + self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6",
> inner_l4_type='UDP')
> + # check nvgre + vlan outer packet
> + self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6",
> outer_vlan=1)
> + # check vlan nvgre + vlan inner and outer packet
> + self.nvgre_detect(outer_l3_type = "IPv6", inner_l3_type="IPv6",
> + outer_vlan=1, inner_vlan=1)
> +
> + def test_nvgre_ipv6_checksum_offload(self):
> + # check nvgre packet + inner IPv6 + inner L4 invalid
> + self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1)
> + # check nvgre packet + outer IPv6 + inner L4 invalid
> + self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1)
> + # check nvgre packet + inner + outer ipv6 + inner L4 invalid
> + self.nvgre_checksum(outer_l3_type = "IPv6", inner_l3_type= "IPv6",
> inner_l4_invalid=1)
> + # check nvgre packet + inner IPv6 + tcp checksum invalid
> + self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1,
> inner_l4_type='TCP')
> + #check nvgre packet + inner IPv6 + sctp checksum invalid
> + self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1,
> inner_l4_type='SCTP')
> + #check nvgre packet + inner IPv6 + UDP checksum invalid
> + self.nvgre_checksum(inner_l3_type = "IPv6", inner_l4_invalid=1,
> inner_l4_type='UDP')
> + # check nvgre packet + outer IPv6 + inner tcp checksum invalid
> + self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1,
> inner_l4_type='TCP')
> + #check nvgre packet + outer IPv6 + inner sctp checksum invalid
> + self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1,
> inner_l4_type='SCTP')
> + #check nvgre packet + outer IPv6 + inner UDP checksum invalid
> + self.nvgre_checksum(outer_l3_type = "IPv6", inner_l4_invalid=1,
> inner_l4_type='UDP')
> + # check vlan nvgre packet + inner vlan + inner udp checksum invalid
> + self.nvgre_checksum(inner_l3_type="IPv6", inner_vlan=1,
> inner_l4_invalid=1, inner_l4_type='UDP')
> + # check vlan nvgre packet + outer vlan + inner udp checksum invalid
> + self.nvgre_checksum(outer_l3_type="IPv6", outer_vlan=1,
> inner_l4_invalid=1, inner_l4_type='UDP')
> + # check vlan nvgre packet + outer vlan + inner tcp checksum invalid
> + self.nvgre_checksum(outer_l3_type="IPv6", outer_vlan=1,
> inner_l4_invalid=1, inner_l4_type='TCP')
> + # check vlan nvgre packet + inner vlan + inner tcp checksum invalid
> + self.nvgre_checksum(inner_l3_type="IPv6", inner_vlan=1,
> inner_l4_invalid=1, inner_l4_type='TCP')
> + # check vlan nvgre packet + inner vlan + inner sctp checksum invalid
> + self.nvgre_checksum(inner_l3_type="IPv6", inner_vlan=1,
> inner_l4_invalid=1, inner_l4_type='SCTP')
> + # check vlan nvgre packet + outer vlan + inner sctp checksum invalid
> + self.nvgre_checksum(outer_l3_type="IPv6", outer_vlan=1,
> + inner_l4_invalid=1, inner_l4_type='SCTP')
> +
> def test_nvgre_ipv4(self):
> """
> verify nvgre packet with ipv4
> """
> # packet type detect must used without VECTOR pmd
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model == 'y':
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model == 'y':
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" %
> + self.compile_switch
> + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> # check no nvgre packet
> self.nvgre_detect(outer_ip_proto=0xFF)
> @@ -642,13 +698,17 @@ class TestNvgre(TestCase):
> self.nvgre_detect(outer_vlan=1)
> # check vlan nvgre + vlan inner packet
> self.nvgre_detect(outer_vlan=1, inner_vlan=1)
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model != dst_vec_model:
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model != dst_vec_model:
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" %
> + self.compile_switch
> + "%s=%s/' config/common_base" % (self.compile_switch,
> src_vec_model), "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
> def test_tunnel_filter(self):
>
> # verify tunnel filter feature
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-30 3:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-29 7:44 [dts] [PATCH V4] tests/TestSuite_nvgre: Enable CVL25Gand100gNIC and change no vec model configuration zhiwei.he
2019-08-30 3:05 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).