From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Zhu, ShuaiX" <shuaix.zhu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>,
"Zhu, ShuaiX" <shuaix.zhu@intel.com>
Subject: Re: [dts] [PATCH V1] tests/dpdk_hugetlbfs_mount_size: add new testsuite dpdk_hugetlbfs_mount_size
Date: Wed, 4 Sep 2019 05:07:51 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BB1BEAF@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1566888644-70444-1-git-send-email-shuaix.zhu@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhu,shuai
> Sent: Tuesday, August 27, 2019 2:51 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Zhu, ShuaiX
> <shuaix.zhu@intel.com>
> Subject: [dts] [PATCH V1] tests/dpdk_hugetlbfs_mount_size: add new
> testsuite dpdk_hugetlbfs_mount_size
>
> add new testsuite dpdk_hugetlbfs_mount_size.
>
> Signed-off-by: zhu,shuai <shuaix.zhu@intel.com>
> ---
> tests/TestSuite_dpdk_hugetlbfs_mount_size.py | 273 +++++++++++++++++++
> 1 file changed, 273 insertions(+)
> create mode 100644 tests/TestSuite_dpdk_hugetlbfs_mount_size.py
>
> diff --git a/tests/TestSuite_dpdk_hugetlbfs_mount_size.py
> b/tests/TestSuite_dpdk_hugetlbfs_mount_size.py
> new file mode 100644
> index 0000000..8ce94b2
> --- /dev/null
> +++ b/tests/TestSuite_dpdk_hugetlbfs_mount_size.py
> @@ -0,0 +1,273 @@
> +#.. Copyright (c) <2019>, Intel Corporation
> +# All rights reserved.
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +
> +# - Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +
> +# - Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +
> +# - Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> +# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +# OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +This feature is to limit DPDK to use the exact size which is the mounted
> hugepage size.
> +"""
> +
> +import re
> +import utils
> +import time
> +from test_case import TestCase
> +
> +DEFAULT_MNT = '/mnt/huge'
> +MNT_PATH = ["/mnt/huge1", "/mnt/huge2", "/mnt/huge3"] vhost_name =
> +["vhost1", "vhost2", "vhost3"]
> +
> +
> +class DpdkHugetlbfsMountSize(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.packet_num = 100
> + self.mem_channels = self.dut.get_memory_channels()
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 2, "Insufficient ports for testing")
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + cores = self.dut.get_core_list("1S/6C/1T", socket=self.ports_socket)
> + self.verify(len(cores) >= 6, "Insufficient cores for speed testing")
> + self.core_list1 = ','.join(str(i) for i in cores[0:2])
> + self.core_list2 = ','.join(str(i) for i in cores[2:4])
> + self.core_list3 = ','.join(str(i) for i in cores[4:6])
> + self.pci_info_0 = self.dut.ports_info[0]['pci']
> + self.pci_info_1 = self.dut.ports_info[1]['pci']
> + self.numa_id = self.dut.get_numa_id(self.dut_ports[0])
> + self.create_folder([MNT_PATH[0], MNT_PATH[1], MNT_PATH[2]])
> + if self.numa_id == 0:
> + self.socket_mem = "1024,0"
> + self.socket_mem2 = "2048,0"
> + else:
> + self.socket_mem = "0,1024"
> + self.socket_mem2 = "0,2048"
> + self.umount_huge([DEFAULT_MNT])
> +
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def close_session(self):
> + self.dut.close_session(self.session_first)
> + self.dut.close_session(self.session_secondary)
> +
> + def send_pkg(self, port_id):
> + tx_interface =
> self.tester.get_interface(self.tester.get_local_port(self.dut_ports[port_id]))
> + mac = self.dut.get_mac_address(self.dut_ports[port_id])
> + cmd = 'sendp([Ether(dst="%s")/IP()/("X"*64)], iface="%s", count=%d)'
> + excute_cmd = cmd % (mac, tx_interface, self.packet_num)
> + self.tester.scapy_append(excute_cmd)
> + self.tester.scapy_execute()
> +
> + def verify_result(self, session):
> + out = session.send_expect("show port stats all", "testpmd> ", 120)
> + self.result_first = re.findall(r'RX-packets: (\w+)', out)
> + self.result_secondary = re.findall(r'TX-packets: (\w+)', out)
> + self.verify(int(self.result_first[0]) == self.packet_num and
> + int(self.result_secondary[0]) == self.packet_num, "forward packets no
> + correctly")
> +
> + def create_folder(self, huges=[]):
> + for huge in huges:
> + cmd = ('mkdir -p %s' % huge)
> + self.dut.send_expect(cmd, "#", 15)
> +
> + def del_folder(self, huges=[]):
> + for huge in huges:
> + cmd = ('rm -rf %s' % huge)
> + self.dut.send_expect(cmd, "#", 15)
> +
> + def umount_huge(self, huges=[]):
> + for huge in huges:
> + cmd = ('umount %s' % huge)
> + self.dut.send_expect(cmd, "#", 15)
> +
> + def test_default_hugepage_size(self):
> + # Bind one nic port to igb_uio driver, launch testpmd
> + self.dut.send_expect("mount -t hugetlbfs hugetlbfs %s" %
> MNT_PATH[0], "#", 15)
> + self.logger.info("test default hugepage size start testpmd without
> numa")
> + ttd = './%s/app/testpmd -l %s -n %d --huge-dir %s --file-prefix=%s -w %s
> -- -i'
> + launch_ttd = ttd % (self.target, self.core_list1, self.mem_channels,
> MNT_PATH[0], vhost_name[0], self.pci_info_0)
> + self.dut.send_expect(launch_ttd, "testpmd> ", 120)
> + self.dut.send_expect("set promisc all off", "testpmd> ", 120)
> + self.dut.send_expect("start", "testpmd> ", 120)
> + self.dut.send_expect("clear port stats all", "testpmd> ", 120)
> + self.send_pkg(0)
> + self.verify_result(self.dut)
> + self.dut.send_expect("quit", "#", 15)
> +
> + # resart testpmd with numa support
> + self.logger.info("test default hugepage size start testpmd with numa")
> + ttd_secondary = './%s/app/testpmd -l %s -n %d --huge-dir %s --file-
> prefix=%s -w %s -- -i --numa'
> + launch_ttd_secondary = ttd_secondary % (self.target, self.core_list1,
> self.mem_channels, MNT_PATH[0], vhost_name[0], self.pci_info_0)
> + self.dut.send_expect(launch_ttd_secondary, "testpmd> ", 120)
> + self.dut.send_expect("set promisc all off", "testpmd> ", 120)
> + self.dut.send_expect("start", "testpmd> ", 120)
> + self.dut.send_expect("clear port stats all", "testpmd> ", 120)
> + self.send_pkg(0)
> + self.verify_result(self.dut)
> + self.dut.send_expect("quit", "#", 15)
> + self.umount_huge([MNT_PATH[0]])
> +
> + def
> test_mount_size_exactly_match_hugepage_size_two_mount_points(self):
> + # Bind two nic ports to igb_uio driver, launch testpmd with numactl
> + self.session_first = self.dut.new_session(suite="session_first")
> + self.session_secondary =
> self.dut.new_session(suite="session_secondary")
> + self.dut.send_expect("mount -t hugetlbfs -o size=4G hugetlbfs %s" %
> MNT_PATH[0], "#", 15)
> + self.dut.send_expect("mount -t hugetlbfs -o size=4G hugetlbfs
> + %s" % MNT_PATH[1], "#", 15)
> +
> + self.logger.info("start first testpmd")
> + ttd = 'numactl --membind=%d ./%s/app/testpmd -l %s -n %d --legacy-
> mem --socket-mem %s' \
> + ' --huge-dir %s --file-prefix=%s -w %s -- -i --socket-num=%d --no-
> numa'
> + launch_ttd = ttd % (self.numa_id, self.target, self.core_list1,
> self.mem_channels, self.socket_mem2, MNT_PATH[0], vhost_name[0],
> self.pci_info_0, self.numa_id)
> + self.session_first.send_expect(launch_ttd, "testpmd> ", 120)
> + self.session_first.send_expect("set promisc all off", "testpmd> ", 120)
> + self.session_first.send_expect("start", "testpmd> ", 120)
> + self.session_first.send_expect("clear port stats all",
> + "testpmd> ", 120)
> +
> + self.logger.info("start secondary testpmd")
> + ttd_secondary = 'numactl --membind=%d ./%s/app/testpmd -l %s -
> n %d --legacy-mem --socket-mem %s' \
> + ' --huge-dir %s --file-prefix=%s -w %s -- -i --socket-num=%d -
> -no-numa'
> + launch_ttd_secondary = ttd_secondary % (self.numa_id, self.target,
> self.core_list2, self.mem_channels, self.socket_mem2, MNT_PATH[1],
> vhost_name[1], self.pci_info_1, self.numa_id)
> + self.session_secondary.send_expect(launch_ttd_secondary, "testpmd>
> ", 120)
> + self.session_secondary.send_expect("set promisc all off", "testpmd> ",
> 120)
> + self.session_secondary.send_expect("start", "testpmd> ", 120)
> + self.session_secondary.send_expect("clear port stats all", "testpmd> ",
> 120)
> + self.send_pkg(0)
> + self.send_pkg(1)
> + self.verify_result(self.session_first)
> + self.verify_result(self.session_secondary)
> + self.session_first.send_expect("quit", "#", 15)
> + self.session_secondary.send_expect("quit", "#", 15)
> + self.close_session()
> + self.umount_huge([MNT_PATH[0], MNT_PATH[1]])
> +
> + def
> test_mount_size_greater_than_hugepage_size_single_mount_point(self):
> + # Bind one nic port to igb_uio driver
> + self.dut.send_expect("mount -t hugetlbfs -o size=9G hugetlbfs %s" %
> MNT_PATH[0], "#", 15)
> + ttd = './%s/app/testpmd -l %s -n %d --legacy-mem --huge-dir %s --file-
> prefix=%s -w %s -- -i'
> + launch_ttd = ttd % (self.target, self.core_list1, self.mem_channels,
> MNT_PATH[0], vhost_name[0], self.pci_info_0)
> + self.dut.send_expect(launch_ttd, "testpmd> ", 120)
> + self.dut.send_expect("set promisc all off", "testpmd> ", 120)
> + self.dut.send_expect("start", "testpmd> ", 120)
> + self.dut.send_expect("clear port stats all", "testpmd> ", 120)
> + self.send_pkg(0)
> + self.verify_result(self.dut)
> + self.dut.send_expect("quit", "#", 15)
> + self.umount_huge([MNT_PATH[0]])
> +
> + def
> test_mount_size_greater_than_hugepage_size_multiple_mount_points(self):
> + # Bind one nic port to igb_uio driver, launch testpmd
> + self.session_first = self.dut.new_session(suite="session_first")
> + self.session_secondary =
> self.dut.new_session(suite="session_secondary")
> + self.dut.send_expect("mount -t hugetlbfs -o size=4G hugetlbfs %s" %
> MNT_PATH[0], "#", 15)
> + self.dut.send_expect("mount -t hugetlbfs -o size=4G hugetlbfs %s" %
> MNT_PATH[1], "#", 15)
> + self.dut.send_expect("mount -t hugetlbfs -o size=1G hugetlbfs %s" %
> MNT_PATH[2], "#", 15)
> + # launch first testpmd
> + self.logger.info("launch first testpmd")
> + ttd = 'numactl --membind=%d ./%s/app/testpmd -l %s -n %d --legacy-
> mem --socket-mem %s --huge-dir %s' \
> + ' --file-prefix=%s -w %s -- -i --socket-num=%d --no-numa'
> + launch_ttd = ttd % (self.numa_id, self.target, self.core_list1,
> self.mem_channels, self.socket_mem2, MNT_PATH[0], vhost_name[0],
> self.pci_info_0, self.numa_id)
> + self.session_first.send_expect(launch_ttd, "testpmd> ", 120)
> + self.session_first.send_expect("set promisc all off", "testpmd> ", 120)
> + self.session_first.send_expect("start", "testpmd> ", 120)
> + self.session_first.send_expect("start", "testpmd> ", 120)
> +
> + # launch secondary testpmd
> + self.logger.info("launch secondary testpmd")
> + ttd_secondary = 'numactl --membind=%d ./%s/app/testpmd -l %s -
> n %d --legacy-mem --socket-mem %s --huge-dir' \
> + ' %s --file-prefix=%s -w %s -- -i --socket-num=%d --no-numa'
> + launch_ttd_secondary = ttd_secondary % (self.numa_id, self.target,
> self.core_list2, self.mem_channels, self.socket_mem2, MNT_PATH[1],
> vhost_name[1], self.pci_info_0, self.numa_id)
> + self.session_secondary.send_expect(launch_ttd_secondary, "testpmd>
> ", 120)
> + self.session_secondary.send_expect("set promisc all off", "testpmd> ",
> 120)
> + self.session_secondary.send_expect("start", "testpmd> ", 120)
> + self.session_secondary.send_expect("start", "testpmd> ", 120)
> +
> + # launch third testpmd
> + self.logger.info("launch third testpmd")
> + ttd_third = 'numactl --membind=%d ./%s/app/testpmd -l %s -n %d --
> legacy-mem --socket-mem %s --huge-dir' \
> + ' %s --file-prefix=%s -w %s -- -i --socket-num=%d --no-numa'
> + launch_ttd_third = ttd_third % (self.numa_id, self.target, self.core_list3,
> self.mem_channels, self.socket_mem, MNT_PATH[2], vhost_name[2],
> self.pci_info_0, self.numa_id)
> + expect_str = 'Not enough memory available on socket'
> + self.dut.get_session_output(timeout=2)
> + try:
> + self.dut.send_expect(launch_ttd_third, expect_str, 120)
> + except Exception as e:
> + print(e)
> + self.dut.send_expect("quit", "#", 15)
> + self.session_first.send_expect("quit", "#", 15)
> + self.session_secondary.send_expect("quit", "#", 15)
> + self.umount_huge([MNT_PATH[0], MNT_PATH[1], MNT_PATH[2]])
> + self.verify(0, 'the expect str: %s ,not in output info' % expect_str)
> + self.logger.info('the third testpmd start failed as expect : %s' %
> expect_str)
> + result = self.dut.get_session_output(timeout=2)
> + print result
> +
> + # start send packet and verify the session can receive the packet.
> + self.send_pkg(0)
> + self.verify_result(self.session_first)
> + self.verify_result(self.session_secondary)
> + self.session_first.send_expect("quit", "#", 15)
> + self.session_secondary.send_expect("quit", "#", 15)
> + self.close_session()
> + self.umount_huge([MNT_PATH[0], MNT_PATH[1], MNT_PATH[2]])
> +
> + def test_run_dpdk_app_limited_hugepages_controlled_by_cgroup(self):
> + # Bind one nic port to igb_uio driver, launch testpmd in limited
> hugepages
> + self.dut.send_expect("mount -t hugetlbfs nodev %s" % MNT_PATH[0],
> "#", 15)
> + self.dut.send_expect("cgcreate -g hugetlb:/test-subgroup", "# ", 15)
> + self.dut.send_expect("cgset -r hugetlb.1GB.limit_in_bytes=2147483648
> test-subgroup", "#", 15)
> + ttd = 'cgexec -g hugetlb:test-subgroup numactl -
> m %d ./%s/app/testpmd -l %s -n %d -w %s -- -i --socket-num=%d --no-numa'
> + launch_ttd = ttd % (self.numa_id, self.target, self.core_list1,
> self.mem_channels, self.pci_info_0, self.numa_id)
> + self.dut.send_expect(launch_ttd, "testpmd> ", 120)
> + self.dut.send_expect("set promisc all off", "testpmd> ", 120)
> + self.dut.send_expect("start", "testpmd> ", 120)
> + self.dut.send_expect("clear port stats all", "testpmd> ", 120)
> + self.send_pkg(0)
> + self.verify_result(self.dut)
> + self.dut.send_expect("quit", "#", 15)
> + self.umount_huge([MNT_PATH[0]])
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.kill_all()
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + self.umount_huge([MNT_PATH[0], MNT_PATH[1], MNT_PATH[2]])
> + self.del_folder([MNT_PATH[0], MNT_PATH[1], MNT_PATH[2]])
> + self.dut.send_expect("mount -t hugetlbfs nodev %s" %
> + DEFAULT_MNT, "#", 15)
> --
> 2.17.2
prev parent reply other threads:[~2019-09-04 5:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-27 6:50 zhu,shuai
2019-08-27 8:35 ` Wang, Yinan
2019-09-04 5:07 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BB1BEAF@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=shuaix.zhu@intel.com \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).