From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Zhang, YanX A" <yanx.a.zhang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Yao, Lei A" <lei.a.yao@intel.com>,
"Zhang, YanX A" <yanx.a.zhang@intel.com>
Subject: Re: [dts] [PATCH V1] tests:add new test suite mdd
Date: Fri, 20 Sep 2019 06:31:12 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BB24C67@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1568626042-4315-1-git-send-email-yanx.a.zhang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhang,yan
> Sent: Monday, September 16, 2019 5:27 PM
> To: dts@dpdk.org
> Cc: Yao, Lei A <lei.a.yao@intel.com>; Zhang, YanX A
> <yanx.a.zhang@intel.com>
> Subject: [dts] [PATCH V1] tests:add new test suite mdd
>
> add new test suite mdd.
>
> Signed-off-by: zhang,yan <yanx.a.zhang@intel.com>
> ---
> tests/TestSuite_mdd.py | 206
> +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 206 insertions(+)
> create mode 100644 tests/TestSuite_mdd.py
>
> diff --git a/tests/TestSuite_mdd.py b/tests/TestSuite_mdd.py new file mode
> 100644 index 0000000..7baea2c
> --- /dev/null
> +++ b/tests/TestSuite_mdd.py
> @@ -0,0 +1,206 @@
> +# <COPYRIGHT_TAG>
> +
> +import re
> +import time
> +from packet import Packet
> +from virt_common import VM
> +from test_case import TestCase
> +from pmd_output import PmdOutput
> +
> +VM_CORES_MASK = 'all'
> +send_pks_num = 2000
> +
> +class TestMDD(TestCase):
> +
> + supported_vf_driver = ['pci-stub', 'vfio-pci']
> +
> + def set_up_all(self):
> +
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) > 1, "Insufficient ports")
> + self.vm0 = None
> +
> + # set vf assign method and vf driver
> + self.vf_driver = self.get_suite_cfg()['vf_driver']
> + if self.vf_driver is None:
> + self.vf_driver = 'pci-stub'
> + self.verify(self.vf_driver in self.supported_vf_driver, "Unspported vf
> driver")
> + if self.vf_driver == 'pci-stub':
> + self.vf_assign_method = 'pci-assign'
> + else:
> + self.vf_assign_method = 'vfio-pci'
> + self.dut.send_expect('modprobe vfio-pci', '#')
> + self.dut.send_expect('dmesg -c', '#')
> +
> + self.port_id_0 = 0
> + self.port_id_1 = 1
> +
> + self.tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.rx_port = self.tester.get_local_port(self.dut_ports[1])
> +
> + def set_up(self):
> + pass
> +
> + def setup_2pf_2vf_1vm_env(self):
> + self.used_dut_port_0 = self.dut_ports[0]
> + self.dut.generate_sriov_vfs_by_port(self.used_dut_port_0, 1,
> driver='ixgbe')
> + self.sriov_vfs_port_0 =
> self.dut.ports_info[self.used_dut_port_0]['vfs_port']
> + self.used_dut_port_1 = self.dut_ports[1]
> + self.dut.generate_sriov_vfs_by_port(self.used_dut_port_1, 1,
> driver='ixgbe')
> + self.sriov_vfs_port_1 =
> + self.dut.ports_info[self.used_dut_port_1]['vfs_port']
> +
> + try:
> +
> + for port in self.sriov_vfs_port_0:
> + port.bind_driver(self.vf_driver)
> +
> + for port in self.sriov_vfs_port_1:
> + port.bind_driver(self.vf_driver)
> +
> + time.sleep(1)
> + vf0_prop = {'opt_host': self.sriov_vfs_port_0[0].pci}
> + vf1_prop = {'opt_host': self.sriov_vfs_port_1[0].pci}
> + # not support driver=igb_uio,because driver is kernel driver
> + # set up VM0 ENV
> + self.vm0 = VM(self.dut, 'vm0', 'mdd')
> + self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
> + self.vm0.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
> + self.vm_dut_0 = self.vm0.start()
> + if self.vm_dut_0 is None:
> + raise Exception("Set up VM0 ENV failed!")
> +
> + except Exception as e:
> + self.destroy_2pf_2vf_1vm_env()
> + raise Exception(e)
> +
> + def destroy_2pf_2vf_1vm_env(self):
> + if getattr(self, 'vm0', None):
> + # destroy testpmd in vm0
> + if getattr(self, 'vm0_testpmd', None):
> + self.vm0_testpmd.execute_cmd('stop')
> + self.vm0_testpmd.execute_cmd('quit', '# ')
> + self.vm0_testpmd = None
> +
> + self.vm0_dut_ports = None
> + # destroy vm0
> + self.vm0.stop()
> + self.vm0 = None
> +
> + self.dut.virt_exit()
> +
> + if getattr(self, 'used_dut_port_0', None) != None:
> + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_0)
> + port = self.dut.ports_info[self.used_dut_port_0]['port']
> + port.bind_driver()
> + self.used_dut_port_0 = None
> +
> + if getattr(self, 'used_dut_port_1', None) != None:
> + self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_1)
> + port = self.dut.ports_info[self.used_dut_port_1]['port']
> + port.bind_driver()
> + self.used_dut_port_1 = None
> +
> + for port_id in self.dut_ports:
> + port = self.dut.ports_info[port_id]['port']
> + port.bind_driver()
> +
> + def start_testpmd_in_vm(self, txoffload=''):
> + self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
> + self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> +
> + self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=0x3 --
> tx-offloads=%s" % txoffload)
> + self.vm0_testpmd.execute_cmd('set fwd mac')
> + self.vm0_testpmd.execute_cmd('set promisc all off')
> + self.vm0_testpmd.execute_cmd('start')
> +
> + def send_packets(self):
> +
> + tgen_ports = []
> + self.tester_intf = self.tester.get_interface(self.tx_port)
> + tgen_ports.append((self.tx_port, self.rx_port))
> + self.pmd_vf0_mac =
> + self.vm0_testpmd.get_port_mac(self.port_id_0)
> +
> + dst_mac = self.pmd_vf0_mac
> + src_mac = self.tester.get_mac(self.tx_port)
> +
> + pkt = Packet(pkt_type='UDP', pkt_len=64)
> + pkt.config_layer('ether', {'dst': dst_mac, 'src': src_mac})
> + time.sleep(2)
> + self.vm0_testpmd.execute_cmd('clear port stats all')
> + self.vm0_testpmd.execute_cmd('show port stats all')
> + pkt.send_pkt(tx_port=self.tester_intf, count=send_pks_num)
> + time.sleep(2)
> +
> + def result_verify(self, pkt_fwd=True):
> + pmd0_vf0_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
> + pmd0_vf1_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_1)
> + time.sleep(2)
> +
> + vf0_rx_cnt = pmd0_vf0_stats['RX-packets']
> + self.verify(vf0_rx_cnt >= send_pks_num, "no packet was received
> + by vm0_VF0")
> +
> + vf0_rx_err = pmd0_vf0_stats['RX-errors']
> + self.verify(vf0_rx_err == 0, "vm0_VF0 rx-errors")
> +
> + vf1_tx_cnt = pmd0_vf1_stats['TX-packets']
> + if pkt_fwd:
> + self.verify(vf1_tx_cnt == send_pks_num, "Packet forwarding failed")
> + else:
> + self.verify(vf1_tx_cnt == 0, "Packet is forwarded")
> +
> + def config_mdd(self, value):
> + self.dut.restore_interfaces()
> + self.dut.send_expect("rmmod ixgbe", "# ", 10)
> + time.sleep(2)
> + count = self.dut.send_expect("./usertools/dpdk-devbind.py -s | grep
> ixgbe | wc -l", "#")
> + m = [value for i in range(int(count))]
> + mdd = "MDD=" + str(m).replace("[", "").replace("]", "").replace(" ", "")
> + self.dut.send_expect("modprobe ixgbe %s" % mdd, "# ", 10)
> + time.sleep(5)
> + for port_info in self.dut.ports_info:
> + port = port_info['port']
> + intf = port.get_interface_name()
> + self.dut.send_expect("ifconfig %s up" % intf, "# ", 10)
> + time.sleep(2)
> +
> + def test_1enable_mdd_dpdk_disable(self):
> + self.config_mdd(1)
> + self.setup_2pf_2vf_1vm_env()
> + self.start_testpmd_in_vm(txoffload='0x1')
> + self.send_packets()
> + self.result_verify(False)
> + dmesg = self.dut.send_expect("dmesg -c |grep 'event'", "# ", 10)
> + self.verify("Malicious event" in dmesg,"mdd error")
> +
> + def test_2enable_mdd_dpdk_enable(self):
> + self.config_mdd(1)
> + self.setup_2pf_2vf_1vm_env()
> + self.start_testpmd_in_vm(txoffload='0x0')
> + self.send_packets()
> + self.result_verify(False)
> + dmesg = self.dut.send_expect("dmesg -c |grep 'event'", "# ", 10)
> + self.verify("Malicious event" in dmesg,"mdd error")
> +
> + def test_3disable_mdd_dpdk_disable(self):
> + self.config_mdd(0)
> + self.setup_2pf_2vf_1vm_env()
> + self.start_testpmd_in_vm(txoffload='0x1')
> + self.send_packets()
> + self.result_verify(True)
> + dmesg = self.dut.send_expect("dmesg -c |grep 'event'", "# ", 10)
> + self.verify("Malicious event" not in dmesg,"mdd error")
> +
> + def test_4disable_mdd_dpdk_enable(self):
> + self.config_mdd(0)
> + self.setup_2pf_2vf_1vm_env()
> + self.start_testpmd_in_vm(txoffload='0x0')
> + self.send_packets()
> + self.result_verify(True)
> + dmesg = self.dut.send_expect("dmesg -c |grep 'event'", "# ", 10)
> + self.verify("Malicious event" not in dmesg,"mdd error")
> +
> + def tear_down(self):
> + self.destroy_2pf_2vf_1vm_env()
> +
> + def tear_down_all(self):
> + pass
> --
> 2.17.2
prev parent reply other threads:[~2019-09-20 6:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-16 9:27 zhang,yan
2019-09-17 1:18 ` Yao, Lei A
2019-09-20 6:31 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BB24C67@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=lei.a.yao@intel.com \
--cc=yanx.a.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).