* Re: [dts] [PATCH V1] tests/vxlan:add timeout
2019-10-18 7:18 [dts] [PATCH V1] tests/vxlan:add timeout zhu,shuai
@ 2019-10-18 7:18 ` Zhu, WenhuiX
2019-10-23 9:39 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Zhu, WenhuiX @ 2019-10-18 7:18 UTC (permalink / raw)
To: Zhu, ShuaiX, dts; +Cc: Zhu, ShuaiX
[-- Attachment #1: Type: text/plain, Size: 1126 bytes --]
Tested-by: Zhu, WenhuiX <wenhuix.zhu@intel.com>
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhu,shuai
Sent: Friday, October 18, 2019 3:19 PM
To: dts@dpdk.org
Cc: Zhu, ShuaiX <shuaix.zhu@intel.com>
Subject: [dts] [PATCH V1] tests/vxlan:add timeout
add time
Signed-off-by: zhu,shuai <shuaix.zhu@intel.com>
---
tests/TestSuite_vxlan.py | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/tests/TestSuite_vxlan.py b/tests/TestSuite_vxlan.py index 591ba8c..e29e4a9 100644
--- a/tests/TestSuite_vxlan.py
+++ b/tests/TestSuite_vxlan.py
@@ -444,8 +444,7 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
# save the capture packet into pcap format
inst = self.tester.tcpdump_sniff_packets(self.recv_iface)
config.send_pcap(self.tester_iface)
- pkt = self.tester.load_tcpdump_sniff_packets(inst)
- time.sleep(5)
+ pkt = self.tester.load_tcpdump_sniff_packets(inst, timeout=3)
# extract the checksum offload from saved pcap file
chksums = config.get_chksums(pkt=pkt)
--
2.17.2
[-- Attachment #2: TestVxlan.log --]
[-- Type: application/octet-stream, Size: 2504644 bytes --]
17/10/2019 05:10:00 dts:
TEST SUITE : TestVxlan
17/10/2019 05:10:00 dts: NIC : fortville_eagle
17/10/2019 05:10:00 dut.10.240.176.196:
17/10/2019 05:10:00 tester:
17/10/2019 05:10:01 TestVxlan: Test Case test_tunnel_filter Begin
17/10/2019 05:10:01 dut.10.240.176.196:
17/10/2019 05:10:01 tester:
17/10/2019 05:10:01 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 05:10:16 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:10:16 dut.10.240.176.196: set fwd rxonly
17/10/2019 05:10:16 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 05:10:16 dut.10.240.176.196: set verbose 1
17/10/2019 05:10:16 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 05:10:16 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:10:16 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:10:16 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:10:17 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:10:17 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 05:10:17 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 05:10:17 dut.10.240.176.196: start
17/10/2019 05:10:17 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 05:10:17 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260217.26 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:18 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260217.26 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:20 tester: python /tmp/tester/scapy_ens160f0.cmd1571260217.26
17/10/2019 05:10:20 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:10:22 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 05:10:22 dut.10.240.176.196: stop
17/10/2019 05:10:22 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:10:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 05:10:23 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 05:10:23 dut.10.240.176.196: start
17/10/2019 05:10:23 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 05:10:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260223.21 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260223.21 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:25 tester: python /tmp/tester/scapy_ens160f0.cmd1571260223.21
17/10/2019 05:10:26 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:10:28 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 05:10:28 dut.10.240.176.196: stop
17/10/2019 05:10:28 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:10:28 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 05:10:28 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 05:10:28 dut.10.240.176.196: start
17/10/2019 05:10:29 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 05:10:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260229.06 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:30 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260229.06 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:31 tester: python /tmp/tester/scapy_ens160f0.cmd1571260229.06
17/10/2019 05:10:32 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:10:34 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 05:10:34 dut.10.240.176.196: stop
17/10/2019 05:10:34 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:10:34 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 05:10:34 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 05:10:34 dut.10.240.176.196: start
17/10/2019 05:10:34 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 05:10:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260234.92 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260234.92 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:37 tester: python /tmp/tester/scapy_ens160f0.cmd1571260234.92
17/10/2019 05:10:38 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:10:40 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 05:10:40 dut.10.240.176.196: stop
17/10/2019 05:10:40 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:10:40 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 05:10:40 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 05:10:40 dut.10.240.176.196: start
17/10/2019 05:10:40 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 05:10:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260240.78 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260240.78 root@10.240.176.173:/tmp/tester/
17/10/2019 05:10:43 tester: python /tmp/tester/scapy_ens160f0.cmd1571260240.78
17/10/2019 05:10:44 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:10:46 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 05:10:46 dut.10.240.176.196: stop
17/10/2019 05:10:46 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:10:46 dut.10.240.176.196: quit
17/10/2019 05:10:49 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 05:10:49 TestVxlan: Test Case test_tunnel_filter Result PASSED:
17/10/2019 05:10:49 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:10:53 TestVxlan: Test Case test_tunnel_filter_invalid Begin
17/10/2019 05:10:53 dut.10.240.176.196:
17/10/2019 05:10:53 tester:
17/10/2019 05:10:53 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 05:11:05 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:05 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:11:05 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:11:05 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:11:05 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:11:05 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 05:11:05 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 05:11:05 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
17/10/2019 05:11:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 05:11:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
17/10/2019 05:11:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 05:11:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
17/10/2019 05:11:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 05:11:06 dut.10.240.176.196: stop
17/10/2019 05:11:06 dut.10.240.176.196: stop
Packet forwarding not started
17/10/2019 05:11:06 dut.10.240.176.196: quit
17/10/2019 05:11:09 dut.10.240.176.196:
Port 1: link state change event
quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 05:11:09 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
17/10/2019 05:11:09 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:11:13 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 05:11:13 dut.10.240.176.196:
17/10/2019 05:11:13 tester:
17/10/2019 05:11:13 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 05:11:25 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:25 dut.10.240.176.196: vlan set filter off 0
17/10/2019 05:11:25 dut.10.240.176.196: vlan set filter off 0
17/10/2019 05:11:25 dut.10.240.176.196: set fwd csum
17/10/2019 05:11:25 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 05:11:25 dut.10.240.176.196: port stop all
17/10/2019 05:11:26 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:11:26 dut.10.240.176.196: port stop all
17/10/2019 05:11:26 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 05:11:26 dut.10.240.176.196: csum set ip hw 1
17/10/2019 05:11:26 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:11:26 dut.10.240.176.196: port start all
17/10/2019 05:11:26 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:26 dut.10.240.176.196: port stop all
17/10/2019 05:11:26 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:11:26 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 05:11:26 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:11:26 dut.10.240.176.196: port start all
17/10/2019 05:11:27 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:27 dut.10.240.176.196: port stop all
17/10/2019 05:11:27 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:11:27 dut.10.240.176.196: csum set udp hw 1
17/10/2019 05:11:27 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:11:27 dut.10.240.176.196: port start all
17/10/2019 05:11:27 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:27 dut.10.240.176.196: port stop all
17/10/2019 05:11:28 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:11:28 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 05:11:28 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:11:28 dut.10.240.176.196: port start all
17/10/2019 05:11:28 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:28 dut.10.240.176.196: port stop all
17/10/2019 05:11:28 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:11:28 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 05:11:28 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:11:28 dut.10.240.176.196: port start all
17/10/2019 05:11:29 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:11:29 dut.10.240.176.196: port start all
17/10/2019 05:11:29 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 05:11:29 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 05:11:29 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:11:29 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:11:29 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:11:29 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:11:29 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:11:34 TestVxlan: chksums_ref{}
17/10/2019 05:11:34 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 05:11:34 dut.10.240.176.196: start
17/10/2019 05:11:34 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 05:11:34 tester: ls -d /tmp/tester/
17/10/2019 05:11:35 tester: /tmp/tester/
17/10/2019 05:11:35 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:11:35 tester:
17/10/2019 05:11:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260300.33 root@10.240.176.173:/tmp/tester/
17/10/2019 05:11:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260300.33 root@10.240.176.173:/tmp/tester/
17/10/2019 05:11:43 tester: python /tmp/tester/scapy_ens160f0.cmd1571260300.33
17/10/2019 05:11:43 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 05:11:57 TestVxlan: chksums{}
17/10/2019 05:11:57 dut.10.240.176.196: stop
17/10/2019 05:11:57 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:12:02 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:12:02 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 05:12:02 dut.10.240.176.196: start
17/10/2019 05:12:02 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 05:12:02 tester: ls -d /tmp/tester/
17/10/2019 05:12:03 tester: /tmp/tester/
17/10/2019 05:12:03 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:12:03 tester:
17/10/2019 05:12:08 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260328.3 root@10.240.176.173:/tmp/tester/
17/10/2019 05:12:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260328.3 root@10.240.176.173:/tmp/tester/
17/10/2019 05:12:11 tester: python /tmp/tester/scapy_ens160f0.cmd1571260328.3
17/10/2019 05:12:11 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:12:25 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:12:25 dut.10.240.176.196: stop
17/10/2019 05:12:25 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:12:30 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:12:30 TestVxlan: vxlan packet [outer_ip_invalid = 1]
17/10/2019 05:12:30 dut.10.240.176.196: start
17/10/2019 05:12:30 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 05:12:30 tester: ls -d /tmp/tester/
17/10/2019 05:12:31 tester: /tmp/tester/
17/10/2019 05:12:31 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:12:31 tester:
17/10/2019 05:12:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260356.24 root@10.240.176.173:/tmp/tester/
17/10/2019 05:12:37 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260356.24 root@10.240.176.173:/tmp/tester/
17/10/2019 05:12:39 tester: python /tmp/tester/scapy_ens160f0.cmd1571260356.24
17/10/2019 05:12:39 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:12:53 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 663, in test_vxlan_ipv4_checksum_offload
self.send_and_check(outer_ip_invalid=1)
File "tests/TestSuite_vxlan.py", line 451, in send_and_check
chksums = config.get_chksums(pkt=pkt)
File "tests/TestSuite_vxlan.py", line 203, in get_chksums
if pkt[0].guess_payload_class(pkt[0]).name == "802.1Q":
TypeError: 'NoneType' object has no attribute '__getitem__'
17/10/2019 05:12:53 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:12:58 dut.10.240.176.196:
17/10/2019 05:12:58 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 05:12:59 dut.10.240.176.196:
17/10/2019 05:12:59 tester:
17/10/2019 05:12:59 dut.10.240.176.196: cat config/common_base
17/10/2019 05:12:59 dut.10.240.176.196: Killed
17/10/2019 05:12:59 TestVxlan: Test Case test_vxlan_ipv4_detect Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 526, in test_vxlan_ipv4_detect
src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
AttributeError: 'NoneType' object has no attribute 'group'
17/10/2019 05:12:59 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:13:02 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Begin
17/10/2019 05:13:02 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
[PEXPECT]#
17/10/2019 05:13:02 tester:
17/10/2019 05:13:02 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 05:13:14 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:14 dut.10.240.176.196: vlan set filter off 0
17/10/2019 05:13:14 dut.10.240.176.196: vlan set filter off 0
17/10/2019 05:13:14 dut.10.240.176.196: set fwd csum
17/10/2019 05:13:15 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 05:13:15 dut.10.240.176.196: port stop all
17/10/2019 05:13:15 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:13:15 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 05:13:15 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:13:15 dut.10.240.176.196: port start all
17/10/2019 05:13:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:15 dut.10.240.176.196: port stop all
17/10/2019 05:13:15 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:13:15 dut.10.240.176.196: csum set udp hw 1
17/10/2019 05:13:15 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:13:15 dut.10.240.176.196: port start all
17/10/2019 05:13:16 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:16 dut.10.240.176.196: port stop all
17/10/2019 05:13:16 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:13:16 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 05:13:16 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:13:16 dut.10.240.176.196: port start all
17/10/2019 05:13:16 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:16 dut.10.240.176.196: port stop all
17/10/2019 05:13:17 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:13:17 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 05:13:17 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:13:17 dut.10.240.176.196: port start all
17/10/2019 05:13:17 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:17 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 05:13:17 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 05:13:17 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:13:17 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 05:13:17 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:13:17 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 05:13:17 dut.10.240.176.196: port stop all
17/10/2019 05:13:18 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:13:18 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:13:18 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:13:18 dut.10.240.176.196: port start all
17/10/2019 05:13:18 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:18 dut.10.240.176.196: port stop all
17/10/2019 05:13:18 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:13:18 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:13:18 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:13:18 dut.10.240.176.196: port start all
17/10/2019 05:13:19 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:24 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:13:24 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 05:13:24 dut.10.240.176.196: start
17/10/2019 05:13:24 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:13:24 tester: ls -d /tmp/tester/
17/10/2019 05:13:24 tester: /tmp/tester/
17/10/2019 05:13:24 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:13:24 tester:
17/10/2019 05:13:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260409.68 root@10.240.176.173:/tmp/tester/
17/10/2019 05:13:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260409.68 root@10.240.176.173:/tmp/tester/
17/10/2019 05:13:32 tester: python /tmp/tester/scapy_ens160f0.cmd1571260409.68
17/10/2019 05:13:33 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:13:46 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:13:46 dut.10.240.176.196: stop
17/10/2019 05:13:47 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:13:47 dut.10.240.176.196: port stop all
17/10/2019 05:13:47 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:13:47 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:13:47 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:13:47 dut.10.240.176.196: port start all
17/10/2019 05:13:47 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:47 dut.10.240.176.196: port stop all
17/10/2019 05:13:47 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:13:47 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:13:48 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:13:48 dut.10.240.176.196: port start all
17/10/2019 05:13:48 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:13:53 TestVxlan: chksums_ref{}
17/10/2019 05:13:53 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 05:13:53 dut.10.240.176.196: start
17/10/2019 05:13:53 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:13:53 tester: ls -d /tmp/tester/
17/10/2019 05:13:53 tester: /tmp/tester/
17/10/2019 05:13:53 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:13:53 tester:
17/10/2019 05:13:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260438.91 root@10.240.176.173:/tmp/tester/
17/10/2019 05:14:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260438.91 root@10.240.176.173:/tmp/tester/
17/10/2019 05:14:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571260438.91
17/10/2019 05:14:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 05:14:16 TestVxlan: chksums{}
17/10/2019 05:14:16 dut.10.240.176.196: stop
17/10/2019 05:14:16 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:14:16 dut.10.240.176.196: port stop all
17/10/2019 05:14:16 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:14:16 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:14:16 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:14:16 dut.10.240.176.196: port start all
17/10/2019 05:14:16 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:14:16 dut.10.240.176.196: port stop all
17/10/2019 05:14:17 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:14:17 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:14:17 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:14:17 dut.10.240.176.196: port start all
17/10/2019 05:14:17 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:14:22 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:14:22 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_ip_invalid = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 05:14:22 dut.10.240.176.196: start
17/10/2019 05:14:22 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:14:22 tester: ls -d /tmp/tester/
17/10/2019 05:14:22 tester: /tmp/tester/
17/10/2019 05:14:22 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:14:23 tester:
17/10/2019 05:14:28 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260468.11 root@10.240.176.173:/tmp/tester/
17/10/2019 05:14:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260468.11 root@10.240.176.173:/tmp/tester/
17/10/2019 05:14:30 tester: python /tmp/tester/scapy_ens160f0.cmd1571260468.11
17/10/2019 05:14:31 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=6473)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:14:45 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:14:45 dut.10.240.176.196: stop
17/10/2019 05:14:45 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:14:45 dut.10.240.176.196: port stop all
17/10/2019 05:14:45 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:14:45 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:14:45 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:14:45 dut.10.240.176.196: port start all
17/10/2019 05:14:46 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:14:46 dut.10.240.176.196: port stop all
17/10/2019 05:14:46 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:14:46 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:14:46 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:14:46 dut.10.240.176.196: port start all
17/10/2019 05:14:46 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:14:51 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:14:51 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 05:14:51 dut.10.240.176.196: start
17/10/2019 05:14:51 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:14:51 tester: ls -d /tmp/tester/
17/10/2019 05:14:52 tester: /tmp/tester/
17/10/2019 05:14:52 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:14:52 tester:
17/10/2019 05:14:57 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260497.23 root@10.240.176.173:/tmp/tester/
17/10/2019 05:14:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260497.23 root@10.240.176.173:/tmp/tester/
17/10/2019 05:15:00 tester: python /tmp/tester/scapy_ens160f0.cmd1571260497.23
17/10/2019 05:15:00 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:15:14 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:15:14 dut.10.240.176.196: stop
17/10/2019 05:15:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:15:14 dut.10.240.176.196: port stop all
17/10/2019 05:15:14 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:15:14 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:15:14 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:15:14 dut.10.240.176.196: port start all
17/10/2019 05:15:15 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:15:15 dut.10.240.176.196: port stop all
17/10/2019 05:15:15 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:15:15 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:15:15 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:15:15 dut.10.240.176.196: port start all
17/10/2019 05:15:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:15:20 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:15:20 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 05:15:20 dut.10.240.176.196: start
17/10/2019 05:15:20 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:15:20 tester: ls -d /tmp/tester/
17/10/2019 05:15:21 tester: /tmp/tester/
17/10/2019 05:15:21 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:15:21 tester:
17/10/2019 05:15:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260526.35 root@10.240.176.173:/tmp/tester/
17/10/2019 05:15:27 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260526.35 root@10.240.176.173:/tmp/tester/
17/10/2019 05:15:29 tester: python /tmp/tester/scapy_ens160f0.cmd1571260526.35
17/10/2019 05:15:29 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:15:43 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:15:43 dut.10.240.176.196: stop
17/10/2019 05:15:43 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:15:43 dut.10.240.176.196: port stop all
17/10/2019 05:15:43 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:15:43 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:15:44 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:15:44 dut.10.240.176.196: port start all
17/10/2019 05:15:44 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:15:44 dut.10.240.176.196: port stop all
17/10/2019 05:15:44 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:15:44 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:15:44 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:15:44 dut.10.240.176.196: port start all
17/10/2019 05:15:44 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:15:49 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 05:15:49 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 05:15:49 dut.10.240.176.196: start
17/10/2019 05:15:50 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:15:50 tester: ls -d /tmp/tester/
17/10/2019 05:15:50 tester: /tmp/tester/
17/10/2019 05:15:50 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:15:50 tester:
17/10/2019 05:15:55 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260555.51 root@10.240.176.173:/tmp/tester/
17/10/2019 05:15:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260555.51 root@10.240.176.173:/tmp/tester/
17/10/2019 05:15:58 tester: python /tmp/tester/scapy_ens160f0.cmd1571260555.51
17/10/2019 05:15:59 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 05:16:12 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 05:16:12 dut.10.240.176.196: stop
17/10/2019 05:16:12 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:16:12 dut.10.240.176.196: port stop all
17/10/2019 05:16:13 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:16:13 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:16:13 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:16:13 dut.10.240.176.196: port start all
17/10/2019 05:16:13 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:16:13 dut.10.240.176.196: port stop all
17/10/2019 05:16:13 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:16:13 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:16:13 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:16:13 dut.10.240.176.196: port start all
17/10/2019 05:16:14 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:16:19 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:16:19 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 05:16:19 dut.10.240.176.196: start
17/10/2019 05:16:19 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:16:19 tester: ls -d /tmp/tester/
17/10/2019 05:16:19 tester: /tmp/tester/
17/10/2019 05:16:19 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:16:19 tester:
17/10/2019 05:16:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260584.67 root@10.240.176.173:/tmp/tester/
17/10/2019 05:16:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260584.67 root@10.240.176.173:/tmp/tester/
17/10/2019 05:16:27 tester: python /tmp/tester/scapy_ens160f0.cmd1571260584.67
17/10/2019 05:16:28 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 05:16:41 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 05:16:41 dut.10.240.176.196: stop
17/10/2019 05:16:41 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 05:16:41 dut.10.240.176.196: port stop all
17/10/2019 05:16:42 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 05:16:42 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 05:16:42 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:16:42 dut.10.240.176.196: port start all
17/10/2019 05:16:42 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:16:42 dut.10.240.176.196: port stop all
17/10/2019 05:16:42 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 05:16:42 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 05:16:43 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 05:16:43 dut.10.240.176.196: port start all
17/10/2019 05:16:43 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 05:16:48 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 05:16:48 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 05:16:48 dut.10.240.176.196: start
17/10/2019 05:16:48 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 05:16:48 tester: ls -d /tmp/tester/
17/10/2019 05:16:48 tester: /tmp/tester/
17/10/2019 05:16:48 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 05:16:48 tester:
17/10/2019 05:16:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571260613.9 root@10.240.176.173:/tmp/tester/
17/10/2019 05:16:55 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571260613.9 root@10.240.176.173:/tmp/tester/
17/10/2019 05:16:56 tester: python /tmp/tester/scapy_ens160f0.cmd1571260613.9
17/10/2019 05:16:57 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 05:17:11 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 761, in test_vxlan_ipv6_checksum_offload
outer_vlan=1)
File "tests/TestSuite_vxlan.py", line 451, in send_and_check
chksums = config.get_chksums(pkt=pkt)
File "tests/TestSuite_vxlan.py", line 203, in get_chksums
if pkt[0].guess_payload_class(pkt[0]).name == "802.1Q":
TypeError: 'NoneType' object has no attribute '__getitem__'
17/10/2019 05:17:11 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:17:16 dut.10.240.176.196:
17/10/2019 05:17:16 TestVxlan: Test Case test_vxlan_ipv6_detect Begin
17/10/2019 05:17:16 dut.10.240.176.196:
17/10/2019 05:17:16 tester:
17/10/2019 05:17:16 dut.10.240.176.196: cat config/common_base
17/10/2019 05:17:17 dut.10.240.176.196: Killed
17/10/2019 05:17:17 TestVxlan: Test Case test_vxlan_ipv6_detect Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 577, in test_vxlan_ipv6_detect
src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
AttributeError: 'NoneType' object has no attribute 'group'
17/10/2019 05:17:17 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:17:20 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 05:17:23 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 06:15:34 dts:
TEST SUITE : TestVxlan
17/10/2019 06:15:34 dts: NIC : fortville_eagle
17/10/2019 06:15:34 dut.10.240.176.196:
17/10/2019 06:15:34 tester:
17/10/2019 06:15:34 TestVxlan: Test Case test_tunnel_filter Begin
17/10/2019 06:15:34 dut.10.240.176.196:
17/10/2019 06:15:34 tester:
17/10/2019 06:15:34 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 06:15:50 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:15:50 dut.10.240.176.196: set fwd rxonly
17/10/2019 06:15:50 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 06:15:50 dut.10.240.176.196: set verbose 1
17/10/2019 06:15:50 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 06:15:50 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:15:50 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:15:50 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:15:50 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:15:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 06:15:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 06:15:50 dut.10.240.176.196: start
17/10/2019 06:15:50 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:15:50 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264150.83 root@10.240.176.173:/tmp/tester/
17/10/2019 06:15:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264150.83 root@10.240.176.173:/tmp/tester/
17/10/2019 06:15:53 tester: python /tmp/tester/scapy_ens160f0.cmd1571264150.83
17/10/2019 06:15:54 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:15:56 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:15:56 dut.10.240.176.196: stop
17/10/2019 06:15:56 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:15:56 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 06:15:56 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 06:15:56 dut.10.240.176.196: start
17/10/2019 06:15:56 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:15:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264156.76 root@10.240.176.173:/tmp/tester/
17/10/2019 06:15:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264156.76 root@10.240.176.173:/tmp/tester/
17/10/2019 06:15:59 tester: python /tmp/tester/scapy_ens160f0.cmd1571264156.76
17/10/2019 06:16:00 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:16:02 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:16:02 dut.10.240.176.196: stop
17/10/2019 06:16:02 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:16:02 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 06:16:02 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 06:16:02 dut.10.240.176.196: start
17/10/2019 06:16:02 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:16:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264162.62 root@10.240.176.173:/tmp/tester/
17/10/2019 06:16:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264162.62 root@10.240.176.173:/tmp/tester/
17/10/2019 06:16:05 tester: python /tmp/tester/scapy_ens160f0.cmd1571264162.62
17/10/2019 06:16:06 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:16:08 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:16:08 dut.10.240.176.196: stop
17/10/2019 06:16:08 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:16:08 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 06:16:08 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 06:16:08 dut.10.240.176.196: start
17/10/2019 06:16:08 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:16:08 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264168.44 root@10.240.176.173:/tmp/tester/
17/10/2019 06:16:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264168.44 root@10.240.176.173:/tmp/tester/
17/10/2019 06:16:11 tester: python /tmp/tester/scapy_ens160f0.cmd1571264168.44
17/10/2019 06:16:11 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:16:13 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:16:13 dut.10.240.176.196: stop
17/10/2019 06:16:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:16:14 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:16:14 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:16:14 dut.10.240.176.196: start
17/10/2019 06:16:14 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:16:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264174.27 root@10.240.176.173:/tmp/tester/
17/10/2019 06:16:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264174.27 root@10.240.176.173:/tmp/tester/
17/10/2019 06:16:16 tester: python /tmp/tester/scapy_ens160f0.cmd1571264174.27
17/10/2019 06:16:17 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:16:19 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:16:19 dut.10.240.176.196: stop
17/10/2019 06:16:19 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:16:19 dut.10.240.176.196: quit
17/10/2019 06:16:23 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 06:16:23 TestVxlan: Test Case test_tunnel_filter Result PASSED:
17/10/2019 06:16:23 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:16:26 TestVxlan: Test Case test_tunnel_filter_invalid Begin
17/10/2019 06:16:26 dut.10.240.176.196:
17/10/2019 06:16:26 tester:
17/10/2019 06:16:26 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 06:16:39 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:16:39 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:16:39 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:16:39 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:16:39 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
17/10/2019 06:16:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 06:16:39 dut.10.240.176.196: stop
17/10/2019 06:16:39 dut.10.240.176.196: stop
Packet forwarding not started
17/10/2019 06:16:39 dut.10.240.176.196: quit
17/10/2019 06:16:43 dut.10.240.176.196:
Port 0: link state change event
quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 06:16:43 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
17/10/2019 06:16:43 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:16:46 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 06:16:46 dut.10.240.176.196:
17/10/2019 06:16:46 tester:
17/10/2019 06:16:46 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 06:16:59 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:16:59 dut.10.240.176.196: vlan set filter off 0
17/10/2019 06:16:59 dut.10.240.176.196: vlan set filter off 0
17/10/2019 06:16:59 dut.10.240.176.196: set fwd csum
17/10/2019 06:16:59 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 06:16:59 dut.10.240.176.196: port stop all
17/10/2019 06:16:59 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:16:59 dut.10.240.176.196: port stop all
17/10/2019 06:16:59 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 06:16:59 dut.10.240.176.196: csum set ip hw 1
17/10/2019 06:16:59 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:16:59 dut.10.240.176.196: port start all
17/10/2019 06:17:00 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:17:00 dut.10.240.176.196: port stop all
17/10/2019 06:17:00 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:17:00 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 06:17:00 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:17:00 dut.10.240.176.196: port start all
17/10/2019 06:17:00 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:17:00 dut.10.240.176.196: port stop all
17/10/2019 06:17:00 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:17:00 dut.10.240.176.196: csum set udp hw 1
17/10/2019 06:17:01 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:17:01 dut.10.240.176.196: port start all
17/10/2019 06:17:01 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:17:01 dut.10.240.176.196: port stop all
17/10/2019 06:17:01 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:17:01 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 06:17:01 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:17:01 dut.10.240.176.196: port start all
17/10/2019 06:17:01 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:17:01 dut.10.240.176.196: port stop all
17/10/2019 06:17:02 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:17:02 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 06:17:02 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:17:02 dut.10.240.176.196: port start all
17/10/2019 06:17:02 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:17:02 dut.10.240.176.196: port start all
17/10/2019 06:17:02 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 06:17:02 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 06:17:02 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:17:02 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:17:02 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:17:02 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:17:03 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:17:08 TestVxlan: chksums_ref{}
17/10/2019 06:17:08 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 06:17:08 dut.10.240.176.196: start
17/10/2019 06:17:08 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:17:08 tester: ls -d /tmp/tester/
17/10/2019 06:17:08 tester: /tmp/tester/
17/10/2019 06:17:08 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:17:08 tester:
17/10/2019 06:17:13 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264233.63 root@10.240.176.173:/tmp/tester/
17/10/2019 06:17:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264233.63 root@10.240.176.173:/tmp/tester/
17/10/2019 06:17:16 tester: python /tmp/tester/scapy_ens160f0.cmd1571264233.63
17/10/2019 06:17:17 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:17:30 TestVxlan: chksums{}
17/10/2019 06:17:30 dut.10.240.176.196: stop
17/10/2019 06:17:30 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:17:35 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:17:35 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 06:17:35 dut.10.240.176.196: start
17/10/2019 06:17:36 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:17:36 tester: ls -d /tmp/tester/
17/10/2019 06:17:36 tester: /tmp/tester/
17/10/2019 06:17:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:17:36 tester:
17/10/2019 06:17:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264261.47 root@10.240.176.173:/tmp/tester/
17/10/2019 06:17:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264261.47 root@10.240.176.173:/tmp/tester/
17/10/2019 06:17:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571264261.47
17/10/2019 06:17:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:17:58 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 664, in test_vxlan_ipv4_checksum_offload
self.send_and_check(inner_ip_invalid=1)
File "tests/TestSuite_vxlan.py", line 452, in send_and_check
chksums = config.get_chksums(pkt=pkt)
File "tests/TestSuite_vxlan.py", line 203, in get_chksums
if pkt[0].guess_payload_class(pkt[0]).name == "802.1Q":
TypeError: 'NoneType' object has no attribute '__getitem__'
17/10/2019 06:17:58 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:18:03 dut.10.240.176.196:
17/10/2019 06:18:04 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 06:18:04 dut.10.240.176.196:
17/10/2019 06:18:04 tester:
17/10/2019 06:18:04 dut.10.240.176.196: cat config/common_base
17/10/2019 06:18:04 dut.10.240.176.196: Killed
17/10/2019 06:18:04 TestVxlan: Test Case test_vxlan_ipv4_detect Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 527, in test_vxlan_ipv4_detect
src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
AttributeError: 'NoneType' object has no attribute 'group'
17/10/2019 06:18:04 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:18:07 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Begin
17/10/2019 06:18:07 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
[PEXPECT]#
17/10/2019 06:18:07 tester:
17/10/2019 06:18:07 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 06:18:19 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:19 dut.10.240.176.196: vlan set filter off 0
17/10/2019 06:18:20 dut.10.240.176.196: vlan set filter off 0
17/10/2019 06:18:20 dut.10.240.176.196: set fwd csum
17/10/2019 06:18:20 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 06:18:20 dut.10.240.176.196: port stop all
17/10/2019 06:18:20 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:18:20 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 06:18:20 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:18:20 dut.10.240.176.196: port start all
17/10/2019 06:18:20 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:20 dut.10.240.176.196: port stop all
17/10/2019 06:18:21 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:18:21 dut.10.240.176.196: csum set udp hw 1
17/10/2019 06:18:21 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:18:21 dut.10.240.176.196: port start all
17/10/2019 06:18:21 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:21 dut.10.240.176.196: port stop all
17/10/2019 06:18:21 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:18:21 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 06:18:21 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:18:21 dut.10.240.176.196: port start all
17/10/2019 06:18:22 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:22 dut.10.240.176.196: port stop all
17/10/2019 06:18:22 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:18:22 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 06:18:22 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:18:22 dut.10.240.176.196: port start all
17/10/2019 06:18:22 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:22 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 06:18:22 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:18:22 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:18:22 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:18:22 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:18:23 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:18:23 dut.10.240.176.196: port stop all
17/10/2019 06:18:23 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:18:23 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:18:23 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:18:23 dut.10.240.176.196: port start all
17/10/2019 06:18:23 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:23 dut.10.240.176.196: port stop all
17/10/2019 06:18:23 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:18:23 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:18:24 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:18:24 dut.10.240.176.196: port start all
17/10/2019 06:18:24 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:29 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:18:29 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 06:18:29 dut.10.240.176.196: start
17/10/2019 06:18:29 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:18:29 tester: ls -d /tmp/tester/
17/10/2019 06:18:29 tester: /tmp/tester/
17/10/2019 06:18:29 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:18:29 tester:
17/10/2019 06:18:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264314.86 root@10.240.176.173:/tmp/tester/
17/10/2019 06:18:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264314.86 root@10.240.176.173:/tmp/tester/
17/10/2019 06:18:37 tester: python /tmp/tester/scapy_ens160f0.cmd1571264314.86
17/10/2019 06:18:38 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:18:52 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:18:52 dut.10.240.176.196: stop
17/10/2019 06:18:52 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:18:52 dut.10.240.176.196: port stop all
17/10/2019 06:18:52 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:18:52 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:18:52 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:18:52 dut.10.240.176.196: port start all
17/10/2019 06:18:52 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:52 dut.10.240.176.196: port stop all
17/10/2019 06:18:53 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:18:53 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:18:53 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:18:53 dut.10.240.176.196: port start all
17/10/2019 06:18:53 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:18:58 TestVxlan: chksums_ref{}
17/10/2019 06:18:58 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 06:18:58 dut.10.240.176.196: start
17/10/2019 06:18:58 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:18:58 tester: ls -d /tmp/tester/
17/10/2019 06:18:58 tester: /tmp/tester/
17/10/2019 06:18:58 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:18:58 tester:
17/10/2019 06:19:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264344.03 root@10.240.176.173:/tmp/tester/
17/10/2019 06:19:05 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264344.03 root@10.240.176.173:/tmp/tester/
17/10/2019 06:19:06 tester: python /tmp/tester/scapy_ens160f0.cmd1571264344.03
17/10/2019 06:19:07 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:19:21 TestVxlan: chksums{}
17/10/2019 06:19:21 dut.10.240.176.196: stop
17/10/2019 06:19:21 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:19:21 dut.10.240.176.196: port stop all
17/10/2019 06:19:21 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:19:21 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:19:21 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:19:21 dut.10.240.176.196: port start all
17/10/2019 06:19:21 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:19:21 dut.10.240.176.196: port stop all
17/10/2019 06:19:22 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:19:22 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:19:22 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:19:22 dut.10.240.176.196: port start all
17/10/2019 06:19:22 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:19:27 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:19:27 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_ip_invalid = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 06:19:27 dut.10.240.176.196: start
17/10/2019 06:19:27 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:19:27 tester: ls -d /tmp/tester/
17/10/2019 06:19:27 tester: /tmp/tester/
17/10/2019 06:19:27 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:19:28 tester:
17/10/2019 06:19:33 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264373.15 root@10.240.176.173:/tmp/tester/
17/10/2019 06:19:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264373.15 root@10.240.176.173:/tmp/tester/
17/10/2019 06:19:35 tester: python /tmp/tester/scapy_ens160f0.cmd1571264373.15
17/10/2019 06:19:36 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=6473)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:19:50 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:19:50 dut.10.240.176.196: stop
17/10/2019 06:19:50 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:19:50 dut.10.240.176.196: port stop all
17/10/2019 06:19:50 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:19:50 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:19:50 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:19:50 dut.10.240.176.196: port start all
17/10/2019 06:19:51 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:19:51 dut.10.240.176.196: port stop all
17/10/2019 06:19:51 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:19:51 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:19:51 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:19:51 dut.10.240.176.196: port start all
17/10/2019 06:19:51 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:19:56 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:19:56 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 06:19:56 dut.10.240.176.196: start
17/10/2019 06:19:56 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:19:56 tester: ls -d /tmp/tester/
17/10/2019 06:19:57 tester: /tmp/tester/
17/10/2019 06:19:57 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:19:57 tester:
17/10/2019 06:20:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264402.29 root@10.240.176.173:/tmp/tester/
17/10/2019 06:20:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264402.29 root@10.240.176.173:/tmp/tester/
17/10/2019 06:20:05 tester: python /tmp/tester/scapy_ens160f0.cmd1571264402.29
17/10/2019 06:20:05 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:20:19 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:20:19 dut.10.240.176.196: stop
17/10/2019 06:20:19 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:20:19 dut.10.240.176.196: port stop all
17/10/2019 06:20:19 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:20:19 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:20:19 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:20:19 dut.10.240.176.196: port start all
17/10/2019 06:20:20 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:20:20 dut.10.240.176.196: port stop all
17/10/2019 06:20:20 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:20:20 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:20:20 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:20:20 dut.10.240.176.196: port start all
17/10/2019 06:20:20 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:20:25 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:20:25 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 06:20:25 dut.10.240.176.196: start
17/10/2019 06:20:26 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:20:26 tester: ls -d /tmp/tester/
17/10/2019 06:20:26 tester: /tmp/tester/
17/10/2019 06:20:26 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:20:26 tester:
17/10/2019 06:20:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264431.48 root@10.240.176.173:/tmp/tester/
17/10/2019 06:20:32 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264431.48 root@10.240.176.173:/tmp/tester/
17/10/2019 06:20:34 tester: python /tmp/tester/scapy_ens160f0.cmd1571264431.48
17/10/2019 06:20:35 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:20:48 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:20:48 dut.10.240.176.196: stop
17/10/2019 06:20:48 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:20:48 dut.10.240.176.196: port stop all
17/10/2019 06:20:49 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:20:49 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:20:49 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:20:49 dut.10.240.176.196: port start all
17/10/2019 06:20:49 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:20:49 dut.10.240.176.196: port stop all
17/10/2019 06:20:49 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:20:49 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:20:49 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:20:49 dut.10.240.176.196: port start all
17/10/2019 06:20:50 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:20:55 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:20:55 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 06:20:55 dut.10.240.176.196: start
17/10/2019 06:20:55 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:20:55 tester: ls -d /tmp/tester/
17/10/2019 06:20:55 tester: /tmp/tester/
17/10/2019 06:20:55 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:20:55 tester:
17/10/2019 06:21:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264460.64 root@10.240.176.173:/tmp/tester/
17/10/2019 06:21:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264460.64 root@10.240.176.173:/tmp/tester/
17/10/2019 06:21:03 tester: python /tmp/tester/scapy_ens160f0.cmd1571264460.64
17/10/2019 06:21:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:21:17 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:21:17 dut.10.240.176.196: stop
17/10/2019 06:21:17 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:21:17 dut.10.240.176.196: port stop all
17/10/2019 06:21:18 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:21:18 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:21:18 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:21:18 dut.10.240.176.196: port start all
17/10/2019 06:21:18 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:21:18 dut.10.240.176.196: port stop all
17/10/2019 06:21:18 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:21:18 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:21:18 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:21:18 dut.10.240.176.196: port start all
17/10/2019 06:21:19 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:21:24 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:21:24 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 06:21:24 dut.10.240.176.196: start
17/10/2019 06:21:24 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:21:24 tester: ls -d /tmp/tester/
17/10/2019 06:21:24 tester: /tmp/tester/
17/10/2019 06:21:24 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:21:24 tester:
17/10/2019 06:21:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264489.82 root@10.240.176.173:/tmp/tester/
17/10/2019 06:21:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264489.82 root@10.240.176.173:/tmp/tester/
17/10/2019 06:21:32 tester: python /tmp/tester/scapy_ens160f0.cmd1571264489.82
17/10/2019 06:21:33 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:21:47 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:21:47 dut.10.240.176.196: stop
17/10/2019 06:21:47 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:21:47 dut.10.240.176.196: port stop all
17/10/2019 06:21:47 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:21:47 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:21:47 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:21:47 dut.10.240.176.196: port start all
17/10/2019 06:21:47 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:21:47 dut.10.240.176.196: port stop all
17/10/2019 06:21:48 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:21:48 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:21:48 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:21:48 dut.10.240.176.196: port start all
17/10/2019 06:21:48 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:21:53 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:21:53 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 06:21:53 dut.10.240.176.196: start
17/10/2019 06:21:53 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:21:53 tester: ls -d /tmp/tester/
17/10/2019 06:21:53 tester: /tmp/tester/
17/10/2019 06:21:53 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:21:53 tester:
17/10/2019 06:21:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264518.99 root@10.240.176.173:/tmp/tester/
17/10/2019 06:22:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264518.99 root@10.240.176.173:/tmp/tester/
17/10/2019 06:22:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571264518.99
17/10/2019 06:22:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:22:16 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:22:16 dut.10.240.176.196: stop
17/10/2019 06:22:16 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:22:16 dut.10.240.176.196: port stop all
17/10/2019 06:22:16 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:22:16 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:22:16 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:22:16 dut.10.240.176.196: port start all
17/10/2019 06:22:16 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:22:16 dut.10.240.176.196: port stop all
17/10/2019 06:22:17 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:22:17 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:22:17 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:22:17 dut.10.240.176.196: port start all
17/10/2019 06:22:17 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:22:22 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:22:22 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
17/10/2019 06:22:22 dut.10.240.176.196: start
17/10/2019 06:22:22 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:22:22 tester: ls -d /tmp/tester/
17/10/2019 06:22:23 tester: /tmp/tester/
17/10/2019 06:22:23 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:22:23 tester:
17/10/2019 06:22:28 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264548.17 root@10.240.176.173:/tmp/tester/
17/10/2019 06:22:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264548.17 root@10.240.176.173:/tmp/tester/
17/10/2019 06:22:30 tester: python /tmp/tester/scapy_ens160f0.cmd1571264548.17
17/10/2019 06:22:31 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=80, fl=0, tc=0)/UDP(dport=4789, sport=63, len=80, chksum=437)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:22:45 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:22:45 dut.10.240.176.196: stop
17/10/2019 06:22:45 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:22:45 dut.10.240.176.196: port stop all
17/10/2019 06:22:45 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 06:22:45 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 06:22:45 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:22:45 dut.10.240.176.196: port start all
17/10/2019 06:22:46 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:22:46 dut.10.240.176.196: port stop all
17/10/2019 06:22:46 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:22:46 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 06:22:46 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:22:46 dut.10.240.176.196: port start all
17/10/2019 06:22:46 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:22:51 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:22:51 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
17/10/2019 06:22:51 dut.10.240.176.196: start
17/10/2019 06:22:51 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 06:22:51 tester: ls -d /tmp/tester/
17/10/2019 06:22:52 tester: /tmp/tester/
17/10/2019 06:22:52 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:22:52 tester:
17/10/2019 06:22:57 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264577.34 root@10.240.176.173:/tmp/tester/
17/10/2019 06:22:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264577.34 root@10.240.176.173:/tmp/tester/
17/10/2019 06:23:00 tester: python /tmp/tester/scapy_ens160f0.cmd1571264577.34
17/10/2019 06:23:00 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=92, fl=0, tc=0)/UDP(dport=4789, sport=63, len=92, chksum=37306)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:23:14 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:23:14 dut.10.240.176.196: stop
17/10/2019 06:23:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:23:14 dut.10.240.176.196: quit
17/10/2019 06:23:19 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 06:23:19 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Result PASSED:
17/10/2019 06:23:19 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:23:22 TestVxlan: Test Case test_vxlan_ipv6_detect Begin
17/10/2019 06:23:22 dut.10.240.176.196:
17/10/2019 06:23:22 tester:
17/10/2019 06:23:22 dut.10.240.176.196: cat config/common_base
17/10/2019 06:23:22 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 06:23:28 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 06:23:28 dut.10.240.176.196:
17/10/2019 06:23:28 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 06:23:29 dut.10.240.176.196:
17/10/2019 06:23:29 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 06:23:29 dut.10.240.176.196:
17/10/2019 06:23:29 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 06:23:29 dut.10.240.176.196:
17/10/2019 06:23:29 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 06:23:29 dut.10.240.176.196:
17/10/2019 06:23:29 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 06:23:29 dut.10.240.176.196:
17/10/2019 06:23:29 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 06:23:29 dut.10.240.176.196:
17/10/2019 06:23:29 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 06:25:33 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_vfio.o
CC eal_log.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_lcore.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_cfgfile.o
CC rte_ring.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_pci.h
CC rte_meter.o
CC rte_timer.o
CC rte_pci.o
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
CC rte_metrics.o
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_stack.o
CC rte_stack_std.o
CC rte_rcu_qsbr.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_metrics.a
AR librte_meter.a
INSTALL-LIB librte_metrics.a
INSTALL-LIB librte_meter.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_member
== Build lib/librte_lpm
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
CC ethdev_private.o
CC rte_ethdev.o
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
CC rte_class_eth.o
SYMLINK-FILE include/cmdline_vt100.h
CC rte_flow.o
CC rte_tm.o
SYMLINK-FILE include/cmdline_socket.h
CC rte_mtr.o
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC ethdev_profile.o
CC cmdline.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
AR librte_reorder.a
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
INSTALL-LIB librte_reorder.a
CC rte_lpm.o
CC rte_lpm6.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_eventdev
== Build lib/librte_security
== Build lib/librte_rawdev
== Build lib/librte_ip_frag
== Build lib/librte_vhost
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_kni.o
CC rte_security.o
SYMLINK-FILE include/rte_gro.h
CC rte_gro.o
SYMLINK-FILE include/rte_distributor.h
CC gro_tcp4.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/bpf_def.h
CC rte_distributor_v20.o
SYMLINK-FILE include/rte_ip_frag.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_bpf.h
CC rte_distributor.o
CC rte_latencystats.o
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_bitrate.o
CC rte_ipv4_fragmentation.o
CC rte_distributor_match_sse.o
CC rte_ipv6_fragmentation.o
CC bpf.o
CC rte_ipv4_reassembly.o
CC rte_rawdev.o
SYMLINK-FILE include/rte_gso.h
CC bpf_exec.o
CC rte_ipv6_reassembly.o
CC bpf_load.o
CC rte_ip_frag_common.o
SYMLINK-FILE include/rte_pdump.h
CC rte_gso.o
CC ip_frag_internal.o
CC rte_pdump.o
CC bpf_pkt.o
CC bpf_validate.o
SYMLINK-FILE include/rte_vhost.h
CC bpf_jit_x86.o
SYMLINK-FILE include/rte_vdpa.h
CC gso_common.o
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC gso_tcp4.o
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC fd_man.o
SYMLINK-FILE include/rte_event_ring.h
CC gso_udp4.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC iotlb.o
SYMLINK-FILE include/rte_event_timer_adapter.h
CC socket.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC vhost.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC vhost_user.o
CC virtio_net.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC vdpa.o
CC vhost_crypto.o
CC rte_eventdev.o
CC rte_event_ring.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_pipeline
== Build lib/librte_flow_classify
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
SYMLINK-FILE include/rte_flow_classify.h
CC rte_pipeline.o
CC rte_flow_classify.o
CC rte_port_in_action.o
CC rte_flow_classify_parse.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC octeontx_mbox.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
Building modules, stage 2.
SYMLINK-FILE include/rte_bus_pci.h
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
CC linux/pci.o
CC linux/pci_uio.o
CC linux/pci_vfio.o
CC pci_params.o
CC pci_common.o
CC pci_common_uio.o
CC dpaa_bus.o
SYMLINK-FILE include/rte_bus_vdev.h
CC base/fman/fman.o
SYMLINK-FILE include/rte_bus_vmbus.h
CC base/fman/fman_hw.o
CC vdev.o
SYMLINK-FILE include/rte_vmbus_reg.h
CC vdev_params.o
CC base/fman/of.o
CC base/fman/netcfg_layer.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC linux/vmbus_bus.o
CC base/qbman/process.o
CC vmbus_common.o
CC base/qbman/bman_driver.o
CC mc/dpmng.o
CC vmbus_channel.o
CC base/qbman/bman.o
CC mc/dpbp.o
CC base/qbman/qman.o
CC linux/vmbus_uio.o
CC mc/dpio.o
CC base/qbman/qman_driver.o
CC vmbus_bufring.o
CC mc/mc_sys.o
CC vmbus_common_uio.o
CC mc/dpcon.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
MODPOST 1 modules
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD portal/dpaa2_hw_dpci.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx2
== Build drivers/mempool/octeontx
CC rte_mempool_bucket.o
CC dpaa_mempool.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC rte_mempool_ring.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC rte_mempool_stack.o
CC dpaa2_hw_mempool.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/compress
== Build drivers/common/qat
== Build drivers/crypto/octeontx
== Build drivers/crypto/scheduler
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/crypto/nitrox
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/bonding
== Build drivers/net/axgbe
== Build drivers/net/cxgbe
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/dpaa
== Build drivers/net/enetc
== Build drivers/net/ena
CC qat_comp.o
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
CC qat_comp_pmd.o
== Build drivers/net/hinic
CC qat_device.o
== Build drivers/net/i40e
== Build drivers/net/hns3
CC qat_common.o
CC qat_logs.o
CC qat_qp.o
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/compress/octeontx
== Build drivers/baseband/null
== Build drivers/net/liquidio
CC atl_rxtx.o
SYMLINK-FILE include/rte_eth_bond.h
SYMLINK-FILE include/rte_avp_common.h
CC rte_eth_af_packet.o
CC null_crypto_pmd.o
CC caam_jr.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC nitrox_device.o
SYMLINK-FILE include/rte_avp_fifo.h
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC otx_cryptodev.o
CC virtqueue.o
CC otx_zip_pmd.o
CC ark_ddm.o
CC ena_ethdev.o
CC failsafe.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC dpaa_sec.o
CC axgbe_ethdev.o
CC enetc_ethdev.o
CC iavf_adminq.o
CC hinic_pmd_api_cmd.o
CC rte_eth_bond_api.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC avp_ethdev.o
CC dpaa_ethdev.o
CC hns3_ethdev.o
CC base/dpaa2_hw_dpni.o
CC ipn3ke_ethdev.o
CC bbdev_null.o
CC cxgbe_ethdev.o
CC enic_ethdev.o
CC dpaa2_sec_dpseci.o
CC scheduler_pmd.o
CC fm10k_ethdev.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_i40e.h
SYMLINK-FILE include/rte_pmd_ice.h
CC i40e_adminq.o
CC ice_controlq.o
CC lio_ethdev.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC e1000_82540.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC cxgbevf_ethdev.o
CC cxgbe_main.o
CC cxgbevf_main.o
CC e1000_82541.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD otx_cryptodev.o
CC e1000_82542.o
LD nitrox_device.o
CC otx_cryptodev_capabilities.o
CC nitrox_hal.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC nitrox_logs.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
CC hinic_pmd_cfg.o
CC dpaa2_rxtx.o
LD axgbe_ethdev.o
CC dpaa2_ethdev.o
CC axgbe_dev.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC virtio_pci.o
CC scheduler_pmd_ops.o
CC failsafe_args.o
CC nitrox_sym.o
CC failsafe_eal.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC null_crypto_pmd_ops.o
LD bbdev_null.o
CC e1000_82543.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
== Build drivers/baseband/turbo_sw
LD ipn3ke_ethdev.o
CC ipn3ke_representor.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
LD otx_zip_pmd.o
CC e1000_82571.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC otx_zip.o
LD enic_ethdev.o
LD ark_ethdev.o
CC enic_main.o
CC rte_eth_bond_pmd.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
CC ark_ethdev_rx.o
PMDINFO dpaa_ethdev.o.pmd.c
LD cxgbevf_ethdev.o
CC dpaa_ethdev.o.pmd.o
LD dpaa_ethdev.o
CC virtio_rxtx.o
CC otx_cryptodev_hw_access.o
CC dpaa_rxtx.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC bbdev_turbo_software.o
LD enetc_ethdev.o
CC enetc_rxtx.o
CC hinic_pmd_cmdq.o
CC hinic_pmd_eqs.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC lio_rxtx.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
CC rte_cryptodev_scheduler.o
CC hinic_pmd_hwdev.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_hwif.o
CC e1000_82575.o
CC atl_ethdev.o
CC failsafe_ops.o
CC e1000_i210.o
CC ixgbe_82598.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC dpaa2_flow.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC dpaa2_mux.o
LD cxgbe_ethdev.o
CC ena_com.o
CC sge.o
CC otx_cryptodev_mbox.o
CC nitrox_sym_capabilities.o
CC nitrox_sym_reqmgr.o
CC axgbe_mdio.o
CC iavf_common.o
CC iavf_ethdev.o
CC axgbe_phy_impl.o
CC ixgbe_82599.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC ixgbe_x540.o
CC i40e_common.o
LD dpaa2_ethdev.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC i40e_diag.o
CC fm10k_rxtx.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC fm10k_pf.o
CC hns3_ethdev_vf.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC ice_common.o
LD bbdev_turbo_software.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC ice_sched.o
== Build drivers/baseband/fpga_lte_fec
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
CC otx_cryptodev_ops.o
CC ipn3ke_tm.o
CC e1000_api.o
CC hinic_pmd_mgmt.o
LD dpaa2_mux.o
CC e1000_ich8lan.o
CC virtio_cryptodev.o
CC e1000_logs.o
CC ark_ethdev_tx.o
CC hinic_pmd_niccfg.o
SYMLINK-FILE include/fpga_lte_fec.h
CC fpga_lte_fec.o
CC hinic_pmd_nicio.o
CC nitrox_qp.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC ena_eth_com.o
CC e1000_mac.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC ixgbe_x550.o
CC lio_23xx_vf.o
CC lio_mbox.o
CC atl_hw_regs.o
CC enic_rxtx.o
CC enic_clsf.o
CC enic_res.o
CC hw_atl_utils.o
CC axgbe_i2c.o
CC hinic_pmd_wq.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC caam_jr_capabilities.o
CC scheduler_roundrobin.o
CC dpaa2_sparser.o
CC mc/dpni.o
CC mc/dpkg.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC mc/dpdmux.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC scheduler_pkt_size_distr.o
CC hns3_cmd.o
CC e1000_manage.o
CC e1000_mbx.o
CC e1000_nvm.o
CC hinic_pmd_ethdev.o
CC hinic_pmd_rx.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC ipn3ke_flow.o
CC rte_eth_bond_args.o
CC axgbe_rxtx.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC axgbe_rxtx_vec_sse.o
CC e1000_osdep.o
CC e1000_phy.o
CC ark_mpu.o
CC hinic_pmd_tx.o
CC ark_pktchkr.o
CC caam_jr_hw.o
CC rte_eth_bond_8023ad.o
CC rte_eth_bond_alb.o
CC enic_flow.o
CC e1000_vf.o
CC igb_ethdev.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC igb_rxtx.o
LD fpga_lte_fec.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC i40e_hmc.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC ark_pktdir.o
CC hns3_mbx.o
CC ark_pktgen.o
CC hw_atl_llh.o
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
AR librte_pmd_dpaa.a
CC hw_atl_utils_fw2x.o
INSTALL-LIB librte_pmd_dpaa.a
CC hw_atl_b0.o
CC ixgbe_phy.o
CC igb_pf.o
CC scheduler_failover.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
CC rte_eth_bond_flow.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC rte_pmd_atlantic.o
CC fm10k_tlv.o
CC mc/dpseci.o
CC caam_jr_uio.o
CC fm10k_common.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
CC igb_flow.o
CC em_ethdev.o
CC iavf_vchnl.o
CC em_rxtx.o
CC fm10k_mbx.o
CC ark_rqp.o
CC fm10k_vf.o
CC fm10k_api.o
CC iavf_rxtx.o
CC iavf_rxtx_vec_sse.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC ark_udm.o
CC i40e_lan_hmc.o
LD hinic_pmd_ethdev.o
CC i40e_nvm.o
CC hns3_rxtx.o
CC hns3_rss.o
AR librte_pmd_ipn3ke.a
CC i40e_dcb.o
CC hns3_flow.o
INSTALL-LIB librte_pmd_ipn3ke.a
CC fm10k_rxtx_vec.o
CC ixgbe_api.o
CC hns3_fdir.o
CC ixgbe_vf.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC ixgbe_hv_vf.o
CC i40e_ethdev.o
CC i40e_rxtx.o
CC base/vnic_cq.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC base/vnic_wq.o
== Build drivers/net/memif
CC i40e_ethdev_vf.o
CC ixgbe_dcb.o
CC scheduler_multicore.o
CC ice_switch.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC ixgbe_dcb_82599.o
CC cxgbe_filter.o
CC rte_eth_memif.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC cxgbe_flow.o
== Build drivers/net/netvsc
CC t4_hw.o
CC clip_tbl.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC mps_tcam.o
CC l2t.o
CC ixgbe_dcb_82598.o
CC hn_ethdev.o
CC base/vnic_dev.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC base/vnic_intr.o
LD dpaa_sec.o
CC ixgbe_mbx.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC memif_socket.o
CC base/vnic_rq.o
CC enic_rxtx_vec_avx2.o
CC ixgbe_rxtx.o
CC i40e_pf.o
CC i40e_fdir.o
CC i40e_flow.o
CC rte_pmd_i40e.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC ice_nvm.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
LD dpaa2_sec_dpseci.o
== Build drivers/net/nfp
AR librte_pmd_dpaa2_sec.a
== Build drivers/net/bnxt
INSTALL-LIB librte_pmd_dpaa2_sec.a
== Build drivers/net/null
== Build drivers/net/octeontx
CC t4vf_hw.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
LD igb_ethdev.o
CC hns3_intr.o
CC i40e_tm.o
CC ixgbe_ethdev.o
== Build drivers/net/octeontx2
== Build drivers/net/qede
AR librte_pmd_e1000.a
CC hns3_stats.o
CC nfp_cppcore.o
INSTALL-LIB librte_pmd_e1000.a
CC rte_eth_null.o
CC nfp_cpp_pcie_ops.o
== Build drivers/net/ring
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC octeontx_rxtx.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC ice_flex_pipe.o
CC hn_rxtx.o
CC ice_flow.o
CC otx2_rx.o
CC ecore_dev.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
SYMLINK-FILE include/rte_eth_ring.h
CC ecore_hw.o
LD i40e_ethdev_vf.o
CC rte_eth_ring.o
CC otx2_tx.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC otx2_tm.o
CC otx2_rss.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC otx2_mac.o
CC ice_dcb.o
CC otx2_ptp.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC ice_fdir.o
CC bnxt_ethdev.o
CC octeontx_pkovf.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC octeontx_pkivf.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC octeontx_bgx.o
CC octeontx_ethdev.o
CC bnxt_filter.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC bnxt_flow.o
PMDINFO octeontx_pkovf.o.pmd.c
LD octeontx_pkivf.o
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC bnxt_hwrm.o
CC bnxt_ring.o
CC bnxt_rxq.o
CC bnxt_rxr.o
CC hns3_regs.o
CC hns3_dcb.o
CC nfp_mutex.o
CC hns3_mp.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_enic.a
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_enic.a
INSTALL-LIB librte_pmd_ring.a
CC otx2_flow.o
CC nfp_resource.o
CC nfp_crc.o
CC hn_rndis.o
CC hn_nvs.o
CC hn_vf.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC nfp_mip.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC i40e_vf_representor.o
CC nfp_nffw.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
== Build drivers/net/sfc
CC otx2_link.o
CC failsafe_rxtx.o
CC otx2_vlan.o
CC otx2_stats.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
CC nfp_nsp.o
CC nfp_nsp_cmds.o
CC bnxt_stats.o
CC sfc_ethdev.o
CC nfp_nsp_eth.o
CC sfc_kvargs.o
CC sfc.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
CC nfp_net.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC ecore_cxt.o
CC ixgbe_fdir.o
CC ixgbe_pf.o
CC ice_ethdev.o
CC ice_rxtx.o
CC ixgbe_flow.o
CC ecore_l2.o
CC ecore_sp_commands.o
CC ecore_init_fw_funcs.o
CC ice_rxtx_vec_sse.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC ice_switch_filter.o
CC failsafe_ether.o
CC failsafe_flow.o
CC failsafe_intr.o
CC otx2_lookup.o
CC ixgbe_rxtx_vec_sse.o
CC bnxt_txq.o
CC bnxt_txr.o
CC otx2_ethdev.o
CC sfc_mcdi.o
CC ecore_spq.o
CC otx2_flow_ctrl.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
== Build drivers/net/tap
CC ecore_init_ops.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
LD bnxt_ethdev.o
CC ecore_mcp.o
CC sfc_intr.o
CC sfc_ev.o
CC sfc_port.o
CC sfc_rx.o
CC ecore_int.o
CC bnxt_vnic.o
CC otx2_flow_parse.o
CC otx2_flow_utils.o
CC rte_eth_tap.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC tap_flow.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
CC tap_netlink.o
CC tap_tcmsgs.o
LD ixgbe_ethdev.o
== Build drivers/net/thunderx
CC sfc_tx.o
CC sfc_tso.o
CC otx2_ethdev_irq.o
CC ecore_dcbx.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC tap_bpf_api.o
CC bcm_osal.o
CC tap_intr.o
CC ecore_sriov.o
CC ice_rxtx_vec_avx2.o
CC nicvf_rxtx.o
CC otx2_ethdev_ops.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
LD nfp_net.o
CC ecore_vf.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC sfc_filter.o
CC nicvf_hw.o
CC sfc_flow.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC sfc_dp.o
LD i40e_ethdev.o
CC sfc_ef10_rx.o
CC sfc_ef10_essb_rx.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC sfc_ef10_tx.o
== Build drivers/net/vdev_netvsc
CC efx_bootcfg.o
CC nicvf_mbox.o
CC nicvf_ethdev.o
CC vdev_netvsc.o
CC nicvf_bsvf.o
PMDINFO otx2_ethdev.o.pmd.c
CC nicvf_svf.o
CC otx2_ethdev.o.pmd.o
CC efx_crc32.o
CC efx_ev.o
LD otx2_ethdev.o
CC efx_evb.o
CC efx_filter.o
CC efx_hash.o
== Build drivers/net/virtio
CC efx_intr.o
CC ice_generic_flow.o
CC ixgbe_ipsec.o
CC rte_pmd_ixgbe.o
CC ixgbe_tm.o
CC efx_lic.o
CC efx_mac.o
CC qede_ethdev.o
CC efx_mcdi.o
CC virtqueue.o
CC efx_mon.o
CC efx_nic.o
CC virtio_pci.o
CC efx_nvram.o
CC bnxt_irq.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
== Build drivers/net/vmxnet3
== Build drivers/net/kni
== Build drivers/net/softnic
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC efx_phy.o
LD ice_ethdev.o
CC ixgbe_vf_representor.o
CC bnxt_rxtx_vec_sse.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC vmxnet3_rxtx.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
CC rte_eth_kni.o
SYMLINK-FILE include/rte_eth_softnic.h
AR librte_pmd_vdev_netvsc.a
CC rte_eth_softnic.o
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC vmxnet3_ethdev.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC virtio_rxtx.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
CC qede_main.o
CC qede_rxtx.o
CC qede_filter.o
CC mcdi_mon.o
CC virtio_ethdev.o
CC siena_mac.o
CC siena_mcdi.o
CC virtio_rxtx_simple.o
CC virtio_rxtx_simple_sse.o
CC siena_nic.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
AR librte_pmd_ixgbe.a
LD nicvf_ethdev.o
INSTALL-LIB librte_pmd_ixgbe.a
CC rte_eth_softnic_link.o
CC siena_nvram.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC rte_eth_softnic_tm.o
== Build drivers/net/vhost
CC siena_phy.o
CC siena_sram.o
CC virtio_user/vhost_user.o
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
CC siena_vpd.o
CC ef10_ev.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC ef10_evb.o
LD rte_eth_kni.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC ef10_filter.o
CC ef10_intr.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic_tap.o
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC rte_eth_softnic_action.o
CC ef10_image.o
CC ef10_mac.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
CC ef10_mcdi.o
== Build drivers/net/ifc
CC rte_eth_softnic_pipeline.o
CC rte_eth_softnic_thread.o
CC rte_eth_softnic_cli.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC rte_eth_softnic_flow.o
CC vmxnet3_ethdev.o.pmd.o
LD vmxnet3_ethdev.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC virtio_user/virtio_user_dev.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC rte_eth_softnic_meter.o
CC ifcvf_vdpa.o
CC ifcvf.o
CC rte_eth_softnic_cryptodev.o
CC virtio_user_ethdev.o
CC parser.o
CC conn.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
LD virtio_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
LD rte_eth_vhost.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC skeleton_eventdev.o
CC dsw_evdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dsw_event.o
CC dsw_xstats.o
CC dpaa_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC sw_evdev_scheduler.o
CC opdl_evdev_xstats.o
CC sw_evdev_xstats.o
CC opdl_test.o
CC sw_evdev_selftest.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD ssovf_probe.o
LD sw_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC ntb.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
SYMLINK-FILE include/rte_ioat_rawdev.h
CC skeleton_rawdev.o
SYMLINK-FILE include/rte_ioat_spec.h
CC otx2_dpi_rawdev.o
CC skeleton_rawdev_test.o
CC otx2_dpi_msg.o
CC ioat_rawdev.o
CC otx2_dpi_test.o
CC ioat_rawdev_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
LD ifpga_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/pdump
== Build app/test-acl
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-compress-perf
== Build app/test-bbdev
== Build app/test-eventdev
== Build app/test-crypto-perf
CC main.o
CC main.o
CC cperf_ops.o
CC main.o
CC evt_main.o
CC test_bbdev.o
CC evt_options.o
CC cperf_options_parsing.o
CC evt_test.o
CC cperf_test_vectors.o
CC main.o
CC cperf_test_throughput.o
CC parser.o
CC comp_perf_options_parse.o
CC test_bbdev_perf.o
CC test_order_common.o
CC test_bbdev_vector.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
CC comp_perf_test_verify.o
CC test_order_queue.o
CC comp_perf_test_benchmark.o
CC main.o
CC test_order_atq.o
CC cperf_test_verify.o
CC cperf_test_vector_parsing.o
CC config.o
CC test_perf_common.o
CC init.o
CC test_perf_queue.o
CC main.o
CC main.o
CC comp_perf_test_common.o
CC cmdline_test.o
CC cperf_test_common.o
CC commands.o
CC testpmd.o
CC parameters.o
LD cmdline_test
CC cmdline.o
CC commands.o
CC test.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
LD testacl
CC test_pipeline_atq.o
CC runtime.o
CC pipeline_stub.o
CC pipeline_hash.o
LD dpdk-procinfo
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC pipeline_acl.o
CC resource.o
CC cmdline_flow.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC config.o
CC test_resource.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_prefetch.o
CC test_byteorder.o
CC test_per_lcore.o
LD dpdk-pdump
CC iofwd.o
CC test_atomic.o
CC macfwd.o
CC macswap.o
CC flowgen.o
CC rxonly.o
CC test_barrier.o
CC txonly.o
CC test_malloc.o
CC csumonly.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC icmpecho.o
CC noisy_vnf.o
CC bpf_cmd.o
CC util.o
CC softnicfwd.o
CC test_cycles.o
CC test_mcslock.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
LD dpdk-test-eventdev
CC test_reciprocal_division.o
LD testpipeline
CC test_reciprocal_division_perf.o
CC test_fbarray.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
INSTALL-APP testpipeline
CC test_efd_perf.o
CC test_hash.o
INSTALL-MAP testpipeline.map
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
LD dpdk-test-crypto-perf
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_common.o
CC test_power_kvm_vm.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
LD dpdk-test-compress-perf
MKRES test_resource_c.res.o
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 06:25:33 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 06:25:45 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:25:45 dut.10.240.176.196: set fwd rxonly
17/10/2019 06:25:45 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 06:25:45 dut.10.240.176.196: set verbose 1
17/10/2019 06:25:46 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 06:25:46 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:25:46 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:25:46 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:25:46 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:25:46 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 06:25:46 dut.10.240.176.196: start
17/10/2019 06:25:46 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:25:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264746.4 root@10.240.176.173:/tmp/tester/
17/10/2019 06:25:47 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264746.4 root@10.240.176.173:/tmp/tester/
17/10/2019 06:25:49 tester: python /tmp/tester/scapy_ens160f0.cmd1571264746.4
17/10/2019 06:25:49 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:25:51 dut.10.240.176.196:
Port 0: link state change event
Port 1: link state change event
port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=80 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:25:51 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP]
17/10/2019 06:25:51 dut.10.240.176.196: start
17/10/2019 06:25:52 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 06:25:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264752.01 root@10.240.176.173:/tmp/tester/
17/10/2019 06:25:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264752.01 root@10.240.176.173:/tmp/tester/
17/10/2019 06:25:54 tester: python /tmp/tester/scapy_ens160f0.cmd1571264752.01
17/10/2019 06:25:55 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:25:57 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=130 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:25:57 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP]
17/10/2019 06:25:57 dut.10.240.176.196: start
17/10/2019 06:25:57 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 06:25:57 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264757.62 root@10.240.176.173:/tmp/tester/
17/10/2019 06:25:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264757.62 root@10.240.176.173:/tmp/tester/
17/10/2019 06:26:00 tester: python /tmp/tester/scapy_ens160f0.cmd1571264757.62
17/10/2019 06:26:01 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=9159)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:26:03 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:26:03 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = SCTP]
17/10/2019 06:26:03 dut.10.240.176.196: start
17/10/2019 06:26:03 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 06:26:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571264763.23 root@10.240.176.173:/tmp/tester/
17/10/2019 06:26:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571264763.23 root@10.240.176.173:/tmp/tester/
17/10/2019 06:26:05 tester: python /tmp/tester/scapy_ens160f0.cmd1571264763.23
17/10/2019 06:26:06 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=94, fl=0, tc=0)/UDP(dport=4789, sport=63, len=94, chksum=38949)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 06:26:08 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=148 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:26:08 dut.10.240.176.196: stop
17/10/2019 06:26:08 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 4 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:26:08 dut.10.240.176.196: quit
17/10/2019 06:26:12 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 06:26:12 dut.10.240.176.196: cat config/common_base
17/10/2019 06:26:12 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 06:26:12 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 06:26:12 dut.10.240.176.196:
17/10/2019 06:26:12 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 06:26:12 dut.10.240.176.196:
17/10/2019 06:26:12 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 06:26:12 dut.10.240.176.196:
17/10/2019 06:26:12 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 06:26:13 dut.10.240.176.196:
17/10/2019 06:26:13 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 06:26:13 dut.10.240.176.196:
17/10/2019 06:26:13 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 06:26:13 dut.10.240.176.196:
17/10/2019 06:26:13 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 06:26:13 dut.10.240.176.196:
17/10/2019 06:26:13 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 06:28:15 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio_mp_sync.o
CC eal_vfio.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_lcore.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_jobstats
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
CC rte_ring.o
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_cfgfile.o
CC rte_timer.o
CC rte_metrics.o
SYMLINK-FILE include/rte_pci.h
CC rte_pci.o
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_stack.o
CC rte_meter.o
CC rte_jobstats.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
CC rte_mempool.o
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
CC rte_mempool_ops.o
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_mempool_ops_default.o
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
AR librte_acl.a
INSTALL-LIB librte_power.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_crypto_asym.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_compressdev_internal.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_compressdev.o
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
CC rte_net.o
CC rte_compressdev_pmd.o
CC rte_comp.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
CC rte_red.o
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/rte_ethdev.h
CC rte_approx.o
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/cmdline_parse_portlist.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
CC cmdline.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC ethdev_private.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC rte_ethdev.o
CC rte_class_eth.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC rte_flow.o
CC rte_tm.o
CC rte_mtr.o
CC cmdline_socket.o
CC ethdev_profile.o
CC cmdline_parse_portlist.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
SYMLINK-FILE include/rte_efd.h
CC rte_lpm6.o
CC rte_efd.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_bitratestats
== Build lib/librte_gro
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_security.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_security_driver.h
CC rte_security.o
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_latencystats.h
CC rte_pdump.o
CC rte_latencystats.o
SYMLINK-FILE include/rte_kni.h
CC rte_kni.o
SYMLINK-FILE include/rte_gso.h
CC rte_gso.o
SYMLINK-FILE include/bpf_def.h
CC gso_common.o
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_ip_frag.h
CC gso_tunnel_tcp4.o
CC rte_gro.o
SYMLINK-FILE include/rte_distributor.h
CC gro_tcp4.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC rte_ipv4_fragmentation.o
CC gso_udp4.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_vdpa.h
CC rte_distributor_v20.o
CC gro_vxlan_tcp4.o
CC bpf.o
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_bitrate.h
CC bpf_exec.o
CC rte_ipv6_fragmentation.o
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_ipv4_reassembly.o
CC rte_bitrate.o
CC rte_distributor.o
CC rte_ipv6_reassembly.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
CC fd_man.o
CC bpf_load.o
CC iotlb.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC rte_ip_frag_common.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC ip_frag_internal.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC bpf_pkt.o
CC socket.o
CC vhost.o
CC rte_eventdev.o
CC vhost_user.o
CC virtio_net.o
CC rte_event_ring.o
CC vdpa.o
CC rte_event_eth_rx_adapter.o
CC vhost_crypto.o
CC rte_event_timer_adapter.o
CC bpf_validate.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
CC bpf_jit_x86.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx2
== Build drivers/common/octeontx
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC octeontx_mbox.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/fslmc
== Build drivers/bus/dpaa
== Build drivers/bus/pci
== Build drivers/bus/ifpga
== Build drivers/bus/vmbus
== Build drivers/bus/vdev
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
SYMLINK-FILE include/rte_bus_pci.h
CC linux/pci.o
CC linux/pci_vfio.o
CC linux/pci_uio.o
CC pci_params.o
CC pci_common.o
CC pci_common_uio.o
SYMLINK-FILE include/rte_bus_vdev.h
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
CC vdev.o
CC vdev_params.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/dpbp.o
CC mc/dpio.o
SYMLINK-FILE include/rte_bus_vmbus.h
CC mc/mc_sys.o
CC mc/dpcon.o
SYMLINK-FILE include/rte_vmbus_reg.h
CC mc/dpci.o
CC mc/dpdmai.o
CC linux/vmbus_bus.o
CC dpaa_bus.o
CC portal/dpaa2_hw_dpio.o
CC linux/vmbus_uio.o
CC vmbus_common.o
CC portal/dpaa2_hw_dpbp.o
CC base/fman/fman.o
CC base/fman/of.o
CC base/fman/fman_hw.o
CC base/fman/netcfg_layer.o
CC fslmc_vfio.o
CC portal/dpaa2_hw_dpci.o
CC vmbus_channel.o
CC fslmc_bus.o
CC base/qbman/process.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vmbus.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
INSTALL-LIB librte_bus_vmbus.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
Building modules, stage 2.
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpci.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
MODPOST 1 modules
MODPOST 1 modules
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/ring
== Build drivers/mempool/dpaa2
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_ring.o
CC rte_mempool_stack.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC rte_mempool_bucket.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC dpaa_mempool.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/compress/octeontx
== Build drivers/crypto/octeontx
== Build drivers/crypto/scheduler
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
== Build drivers/baseband/null
== Build drivers/net/af_packet
== Build drivers/net/atlantic
== Build drivers/net/ark
== Build drivers/net/axgbe
== Build drivers/net/avp
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
CC qat_comp.o
CC qat_comp_pmd.o
== Build drivers/net/e1000
CC qat_device.o
CC qat_common.o
== Build drivers/net/ena
CC qat_logs.o
== Build drivers/net/enetc
CC qat_qp.o
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/iavf
== Build drivers/net/i40e
== Build drivers/net/ice
== Build drivers/net/ipn3ke
CC virtqueue.o
CC bbdev_turbo_software.o
SYMLINK-FILE include/fpga_lte_fec.h
CC otx_zip_pmd.o
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC otx_cryptodev.o
CC nitrox_device.o
CC fpga_lte_fec.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC bbdev_null.o
CC dpaa_sec.o
CC rte_eth_af_packet.o
CC dpaa2_sec_dpseci.o
SYMLINK-FILE include/rte_avp_common.h
SYMLINK-FILE include/rte_eth_bond.h
CC caam_jr.o
CC enetc_ethdev.o
CC ark_ddm.o
CC failsafe.o
SYMLINK-FILE include/rte_pmd_dpaa.h
SYMLINK-FILE include/rte_avp_fifo.h
CC scheduler_pmd.o
CC axgbe_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC atl_rxtx.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC ena_ethdev.o
CC iavf_adminq.o
CC hns3_ethdev.o
CC enic_ethdev.o
CC avp_ethdev.o
CC dpaa_ethdev.o
CC base/dpaa2_hw_dpni.o
CC rte_eth_bond_api.o
CC cxgbe_ethdev.o
CC hinic_pmd_api_cmd.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_ice.h
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC ice_controlq.o
CC i40e_adminq.o
CC ipn3ke_ethdev.o
CC ark_ethdev.o
CC hinic_pmd_cfg.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC hinic_pmd_cmdq.o
CC hinic_pmd_eqs.o
CC e1000_82540.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
CC e1000_82541.o
LD otx_cryptodev.o
LD nitrox_device.o
CC otx_cryptodev_capabilities.o
CC nitrox_hal.o
CC nitrox_logs.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC nitrox_sym.o
CC otx_cryptodev_hw_access.o
CC otx_cryptodev_mbox.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC scheduler_pmd_ops.o
CC dpaa2_rxtx.o
LD failsafe.o
CC dpaa2_ethdev.o
CC failsafe_args.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC caam_jr_capabilities.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
PMDINFO axgbe_ethdev.o.pmd.c
LD bbdev_null.o
CC axgbe_ethdev.o.pmd.o
LD ipn3ke_ethdev.o
LD axgbe_ethdev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC ipn3ke_representor.o
CC caam_jr_hw.o
CC axgbe_dev.o
CC virtio_pci.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC e1000_82542.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
LD otx_zip_pmd.o
CC otx_zip.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD enic_ethdev.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC e1000_82543.o
CC enic_main.o
LD ark_ethdev.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC rte_eth_bond_pmd.o
CC ark_ethdev_rx.o
CC ark_ethdev_tx.o
LD bbdev_turbo_software.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC dpaa2_flow.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa2_mux.o
CC dpaa_ethdev.o.pmd.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
LD dpaa_ethdev.o
LD enetc_ethdev.o
CC hinic_pmd_hwdev.o
CC dpaa_rxtx.o
CC enetc_rxtx.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD fpga_lte_fec.o
CC mc/dpseci.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC e1000_82571.o
CC nitrox_sym_capabilities.o
CC otx_cryptodev_ops.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
CC rte_cryptodev_scheduler.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC scheduler_roundrobin.o
CC scheduler_pkt_size_distr.o
CC atl_ethdev.o
CC atl_hw_regs.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
CC hw_atl_utils.o
CC failsafe_eal.o
AR librte_pmd_octeontx_zip.a
CC virtio_rxtx.o
LD dpaa2_mux.o
INSTALL-LIB librte_pmd_octeontx_zip.a
CC virtio_cryptodev.o
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
CC nitrox_sym_reqmgr.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC nitrox_qp.o
CC e1000_82575.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC e1000_i210.o
CC cxgbevf_ethdev.o
CC lio_ethdev.o
CC iavf_common.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC axgbe_mdio.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
LD hns3_ethdev.o
CC i40e_common.o
AR librte_pmd_enetc.a
LD fm10k_ethdev.o
INSTALL-LIB librte_pmd_enetc.a
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC hw_atl_llh.o
CC hw_atl_utils_fw2x.o
LD dpaa2_ethdev.o
CC fm10k_rxtx.o
CC scheduler_failover.o
CC hinic_pmd_hwif.o
CC scheduler_multicore.o
CC dpaa2_sparser.o
CC mc/dpni.o
CC failsafe_ops.o
CC ipn3ke_tm.o
CC ice_common.o
CC cxgbe_main.o
CC ice_sched.o
CC ark_mpu.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC ark_pktchkr.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
CC ark_pktdir.o
CC ark_pktgen.o
LD ena_ethdev.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC hw_atl_b0.o
CC ena_com.o
CC rte_pmd_atlantic.o
CC e1000_api.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
CC e1000_ich8lan.o
CC enic_rxtx.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC enic_clsf.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
CC hinic_pmd_wq.o
CC axgbe_phy_impl.o
AR librte_pmd_virtio_crypto.a
CC axgbe_i2c.o
INSTALL-LIB librte_pmd_virtio_crypto.a
CC axgbe_rxtx.o
CC mc/dpkg.o
CC iavf_ethdev.o
CC hinic_pmd_ethdev.o
CC e1000_logs.o
CC mc/dpdmux.o
CC cxgbevf_main.o
CC ena_eth_com.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC lio_rxtx.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC rte_eth_bond_args.o
CC rte_eth_bond_8023ad.o
CC hinic_pmd_rx.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC enic_res.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC enic_flow.o
CC base/vnic_cq.o
CC base/vnic_wq.o
CC ark_rqp.o
CC ark_udm.o
CC sge.o
CC ipn3ke_flow.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC hinic_pmd_tx.o
CC iavf_vchnl.o
CC iavf_rxtx.o
CC axgbe_rxtx_vec_sse.o
CC base/vnic_dev.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC cxgbe_filter.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
== Build drivers/net/memif
CC iavf_rxtx_vec_sse.o
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC base/vnic_intr.o
== Build drivers/net/netvsc
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC ixgbe_82598.o
CC hns3_ethdev_vf.o
CC hns3_cmd.o
CC hns3_mbx.o
CC hns3_rxtx.o
CC base/vnic_rq.o
CC enic_rxtx_vec_avx2.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
CC cxgbe_flow.o
CC t4_hw.o
CC rte_eth_memif.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
CC hn_ethdev.o
LD caam_jr.o
CC e1000_mac.o
CC caam_jr_uio.o
CC lio_23xx_vf.o
CC fm10k_pf.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
CC fm10k_tlv.o
CC ixgbe_82599.o
CC ixgbe_x540.o
CC ixgbe_x550.o
CC ixgbe_phy.o
CC ixgbe_api.o
CC hns3_rss.o
CC hns3_flow.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC hns3_fdir.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
== Build drivers/net/nfp
CC e1000_manage.o
CC i40e_diag.o
CC i40e_hmc.o
CC e1000_mbx.o
== Build drivers/net/bnxt
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
== Build drivers/net/null
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
== Build drivers/net/octeontx
CC nfp_cppcore.o
== Build drivers/net/octeontx2
== Build drivers/net/qede
LD hns3_ethdev_vf.o
== Build drivers/net/ring
CC e1000_nvm.o
CC fm10k_common.o
CC e1000_osdep.o
CC ice_switch.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC ice_nvm.o
CC hn_rxtx.o
CC ice_flex_pipe.o
CC lio_mbox.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
CC fm10k_mbx.o
CC ice_flow.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
AR librte_pmd_dpaa_sec.a
CC rte_eth_null.o
INSTALL-LIB librte_pmd_dpaa_sec.a
CC ice_dcb.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC otx2_rx.o
SYMLINK-FILE include/rte_eth_ring.h
CC octeontx_rxtx.o
LD dpaa2_sec_dpseci.o
CC rte_eth_ring.o
CC otx2_tx.o
== Build drivers/net/sfc
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
== Build drivers/net/tap
CC ecore_dev.o
CC ecore_hw.o
CC ecore_cxt.o
CC e1000_phy.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
CC hns3_intr.o
LD rte_eth_memif.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC rte_eth_bond_alb.o
CC memif_socket.o
LD iavf_ethdev.o
CC e1000_vf.o
CC i40e_lan_hmc.o
CC sfc_ethdev.o
CC ixgbe_vf.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC rte_eth_bond_flow.o
== Build drivers/net/thunderx
CC bnxt_ethdev.o
CC rte_eth_tap.o
CC fm10k_vf.o
CC fm10k_api.o
CC fm10k_rxtx_vec.o
CC ixgbe_hv_vf.o
CC octeontx_pkovf.o
CC octeontx_pkivf.o
CC octeontx_bgx.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
== Build drivers/net/vdev_netvsc
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC nfp_cpp_pcie_ops.o
CC sfc_kvargs.o
CC nicvf_rxtx.o
LD octeontx_pkivf.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC sfc.o
CC ixgbe_dcb.o
CC sfc_mcdi.o
CC sfc_intr.o
CC hns3_stats.o
CC octeontx_ethdev.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
CC hns3_regs.o
INSTALL-LIB librte_pmd_ring.a
CC ice_fdir.o
CC ice_ethdev.o
CC vdev_netvsc.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC ice_rxtx.o
AR librte_pmd_hinic.a
CC igb_ethdev.o
INSTALL-LIB librte_pmd_hinic.a
CC igb_rxtx.o
CC igb_pf.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC tap_flow.o
CC tap_netlink.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC hn_rndis.o
CC hn_nvs.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC i40e_nvm.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
CC ixgbe_dcb_82599.o
INSTALL-LIB librte_pmd_octeontx.a
CC ixgbe_dcb_82598.o
CC ixgbe_mbx.o
CC hns3_dcb.o
CC bnxt_filter.o
CC bnxt_flow.o
CC hns3_mp.o
CC bnxt_hwrm.o
CC ixgbe_rxtx.o
CC ixgbe_ethdev.o
CC tap_tcmsgs.o
CC nfp_mutex.o
== Build drivers/net/virtio
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
CC ecore_l2.o
CC ixgbe_fdir.o
== Build drivers/net/vmxnet3
CC virtqueue.o
LD rte_eth_null.o
AR librte_pmd_vdev_netvsc.a
CC igb_flow.o
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC ixgbe_pf.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC ixgbe_flow.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC vmxnet3_rxtx.o
LD sfc_ethdev.o
CC hn_vf.o
CC nicvf_hw.o
CC em_ethdev.o
CC tap_bpf_api.o
CC sfc_ev.o
CC sfc_port.o
CC nfp_resource.o
CC ecore_sp_commands.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
LD bnxt_ethdev.o
CC ecore_init_fw_funcs.o
CC ice_rxtx_vec_sse.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
== Build drivers/net/kni
== Build drivers/net/softnic
AR librte_pmd_hns3.a
CC ice_switch_filter.o
INSTALL-LIB librte_pmd_hns3.a
CC bnxt_ring.o
CC rte_eth_kni.o
CC clip_tbl.o
CC nicvf_mbox.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC nicvf_ethdev.o
CC nfp_crc.o
CC failsafe_rxtx.o
CC rte_eth_softnic_mempool.o
CC ice_rxtx_vec_avx2.o
CC nfp_mip.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC failsafe_ether.o
CC sfc_rx.o
CC nfp_nffw.o
CC virtio_pci.o
CC i40e_dcb.o
PMDINFO em_ethdev.o.pmd.c
PMDINFO igb_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
CC igb_ethdev.o.pmd.o
CC sfc_tx.o
LD igb_ethdev.o
LD em_ethdev.o
CC sfc_tso.o
CC ecore_spq.o
CC em_rxtx.o
CC rte_eth_softnic_swq.o
== Build drivers/net/vhost
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
== Build drivers/net/ifc
LD rte_eth_kni.o
CC nicvf_bsvf.o
CC mps_tcam.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC l2t.o
CC ixgbe_rxtx_vec_sse.o
CC i40e_ethdev.o
CC i40e_rxtx.o
CC ecore_init_ops.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC t4vf_hw.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC ifcvf_vdpa.o
LD ice_ethdev.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
CC bnxt_rxq.o
CC ecore_mcp.o
CC i40e_rxtx_vec_sse.o
CC failsafe_flow.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
LD rte_eth_softnic.o
CC ifcvf.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC ice_generic_flow.o
CC rte_eth_softnic_link.o
PMDINFO rte_eth_tap.o.pmd.c
CC virtio_rxtx.o
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
CC virtio_ethdev.o
CC tap_intr.o
CC virtio_rxtx_simple.o
CC virtio_rxtx_simple_sse.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
CC virtio_user/vhost_user.o
LD nicvf_ethdev.o
CC nicvf_svf.o
AR librte_pmd_thunderx_nicvf.a
CC virtio_user/vhost_kernel.o
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC failsafe_intr.o
CC virtio_user_ethdev.o
CC rte_eth_softnic_tm.o
CC rte_eth_softnic_tap.o
CC nfp_nsp.o
CC rte_eth_softnic_action.o
CC ecore_int.o
CC otx2_tm.o
CC otx2_rss.o
CC otx2_mac.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC otx2_ptp.o
CC ecore_dcbx.o
CC bcm_osal.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
CC sfc_filter.o
AR librte_pmd_ifc.a
AR librte_pmd_cxgbe.a
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_ifc.a
INSTALL-LIB librte_pmd_cxgbe.a
CC sfc_flow.o
CC sfc_dp.o
CC sfc_ef10_rx.o
LD ixgbe_ethdev.o
CC ixgbe_ipsec.o
CC rte_pmd_ixgbe.o
CC otx2_flow.o
CC otx2_link.o
CC bnxt_rxr.o
CC bnxt_stats.o
CC vmxnet3_ethdev.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
AR librte_pmd_failsafe.a
CC bnxt_txq.o
LD rte_eth_vhost.o
INSTALL-LIB librte_pmd_failsafe.a
CC bnxt_txr.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC bnxt_vnic.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC bnxt_irq.o
CC nfp_nsp_cmds.o
CC bnxt_util.o
LD virtio_user_ethdev.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC nfp_nsp_eth.o
CC nfp_net.o
CC otx2_vlan.o
CC otx2_stats.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
CC efx_bootcfg.o
LD virtio_ethdev.o
CC efx_crc32.o
CC i40e_ethdev_vf.o
CC otx2_flow_parse.o
CC ixgbe_tm.o
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
CC ixgbe_vf_representor.o
CC efx_ev.o
CC ecore_sriov.o
CC ecore_vf.o
CC qede_ethdev.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
LD vmxnet3_ethdev.o
CC qede_main.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC qede_rxtx.o
CC qede_filter.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
CC efx_evb.o
CC rte_eth_softnic_pipeline.o
CC efx_filter.o
CC rte_eth_softnic_thread.o
CC efx_hash.o
CC efx_intr.o
CC efx_lic.o
CC rte_eth_softnic_cli.o
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC efx_mac.o
CC conn.o
CC i40e_pf.o
CC i40e_fdir.o
CC efx_mcdi.o
CC i40e_flow.o
CC efx_mon.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC rte_pmd_i40e.o
CC i40e_tm.o
CC i40e_vf_representor.o
CC i40e_rxtx_vec_avx2.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
CC siena_phy.o
PMDINFO nfp_net.o.pmd.c
LD otx2_ethdev.o
CC nfp_net.o.pmd.o
CC siena_sram.o
LD nfp_net.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
CC siena_vpd.o
AR librte_pmd_nfp.a
CC ef10_ev.o
INSTALL-LIB librte_pmd_nfp.a
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
AR librte_pmd_softnic.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_softnic.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dsw_evdev.o
CC dsw_event.o
CC skeleton_eventdev.o
CC dsw_xstats.o
CC dpaa_eventdev.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC dpaa2_hw_dpcon.o
CC otx2_evdev.o
CC dpaa2_eventdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC sw_evdev.o
CC opdl_evdev_xstats.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC opdl_test.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD timvf_probe.o
LD dpaa2_hw_dpcon.o
LD opdl_evdev.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD sw_evdev.o
LD ssovf_evdev.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa2_eventdev.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC ioat_rawdev.o
CC dpaa2_cmdif.o
CC ioat_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC ntb.o
CC ntb_hw_intel.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_fme.o
CC ifpga_feature_dev.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
LD skeleton_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
== Build app
== Build app/test
== Build app/proc-info
== Build app/test-pmd
== Build app/pdump
== Build app/test-cmdline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-acl
== Build app/test-pipeline
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC main.o
CC main.o
CC config.o
CC main.o
CC test_bbdev.o
CC comp_perf_options_parse.o
CC init.o
CC comp_perf_test_verify.o
CC runtime.o
CC pipeline_stub.o
CC pipeline_hash.o
CC test_bbdev_perf.o
CC test_bbdev_vector.o
CC pipeline_lpm.o
CC main.o
CC cperf_ops.o
CC main.o
CC commands.o
CC cmdline_test.o
CC comp_perf_test_benchmark.o
CC cperf_options_parsing.o
CC cperf_test_vectors.o
CC testpmd.o
CC comp_perf_test_common.o
CC pipeline_lpm_ipv6.o
CC parameters.o
CC cperf_test_throughput.o
CC pipeline_acl.o
CC cperf_test_latency.o
CC cmdline.o
CC cperf_test_pmd_cyclecount.o
CC cperf_test_verify.o
CC cmdline_flow.o
CC cmdline_mtr.o
CC evt_main.o
CC evt_options.o
LD cmdline_test
CC commands.o
CC cmdline_tm.o
CC config.o
CC cperf_test_vector_parsing.o
LD testacl
CC iofwd.o
CC macfwd.o
LD dpdk-procinfo
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC test.o
CC csumonly.o
CC icmpecho.o
CC evt_test.o
CC parser.o
CC test_order_common.o
CC test_order_queue.o
CC resource.o
CC test_order_atq.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_perf_common.o
CC test_perf_queue.o
CC noisy_vnf.o
LD dpdk-pdump
CC test_resource.o
CC bpf_cmd.o
LD testpipeline
CC util.o
CC test_prefetch.o
CC test_byteorder.o
CC test_per_lcore.o
CC softnicfwd.o
CC test_atomic.o
CC test_barrier.o
CC test_malloc.o
CC test_cycles.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_mcslock.o
CC test_spinlock.o
INSTALL-APP dpdk-procinfo
CC test_ticketlock.o
INSTALL-MAP dpdk-procinfo.map
CC test_memory.o
CC cperf_test_common.o
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
INSTALL-APP dpdk-pdump
CC test_pmd_perf.o
CC test_table.o
INSTALL-MAP dpdk-pdump.map
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
LD dpdk-test-crypto-perf
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
LD dpdk-test-eventdev
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
INSTALL-APP dpdk-test-crypto-perf
CC test_link_bonding.o
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD testpmd
LD dpdk-test-compress-perf
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 06:28:15 TestVxlan: Test Case test_vxlan_ipv6_detect Result PASSED:
17/10/2019 06:28:15 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:28:19 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:28:22 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 06:45:45 dts:
TEST SUITE : TestVxlan
17/10/2019 06:45:45 dts: NIC : fortville_eagle
17/10/2019 06:45:45 dut.10.240.176.196:
17/10/2019 06:45:45 tester:
17/10/2019 06:45:45 TestVxlan: Test Case test_tunnel_filter Begin
17/10/2019 06:45:45 dut.10.240.176.196:
17/10/2019 06:45:45 tester:
17/10/2019 06:45:45 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 06:46:00 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:46:00 dut.10.240.176.196: set fwd rxonly
17/10/2019 06:46:01 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 06:46:01 dut.10.240.176.196: set verbose 1
17/10/2019 06:46:01 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 06:46:01 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:46:01 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:46:01 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:46:01 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:46:01 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 06:46:01 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 06:46:01 dut.10.240.176.196: start
17/10/2019 06:46:01 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:46:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571265961.67 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571265961.67 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:04 tester: python /tmp/tester/scapy_ens160f0.cmd1571265961.67
17/10/2019 06:46:05 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:46:07 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:46:07 dut.10.240.176.196: stop
17/10/2019 06:46:07 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:46:07 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 06:46:07 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 06:46:07 dut.10.240.176.196: start
17/10/2019 06:46:07 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:46:07 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571265967.61 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:08 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571265967.61 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:10 tester: python /tmp/tester/scapy_ens160f0.cmd1571265967.61
17/10/2019 06:46:11 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:46:13 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:46:13 dut.10.240.176.196: stop
17/10/2019 06:46:13 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:46:13 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 06:46:13 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 06:46:13 dut.10.240.176.196: start
17/10/2019 06:46:13 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:46:13 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571265973.44 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571265973.44 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:16 tester: python /tmp/tester/scapy_ens160f0.cmd1571265973.44
17/10/2019 06:46:16 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:46:18 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:46:18 dut.10.240.176.196: stop
17/10/2019 06:46:19 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:46:19 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 06:46:19 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 06:46:19 dut.10.240.176.196: start
17/10/2019 06:46:19 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:46:19 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571265979.27 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571265979.27 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:21 tester: python /tmp/tester/scapy_ens160f0.cmd1571265979.27
17/10/2019 06:46:22 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:46:24 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:46:24 dut.10.240.176.196: stop
17/10/2019 06:46:24 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:46:24 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:46:24 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:46:24 dut.10.240.176.196: start
17/10/2019 06:46:25 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 06:46:25 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571265985.11 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571265985.11 root@10.240.176.173:/tmp/tester/
17/10/2019 06:46:27 tester: python /tmp/tester/scapy_ens160f0.cmd1571265985.11
17/10/2019 06:46:28 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:46:30 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 06:46:30 dut.10.240.176.196: stop
17/10/2019 06:46:30 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:46:30 dut.10.240.176.196: quit
17/10/2019 06:46:34 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 06:46:34 TestVxlan: Test Case test_tunnel_filter Result PASSED:
17/10/2019 06:46:34 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:46:37 TestVxlan: Test Case test_tunnel_filter_invalid Begin
17/10/2019 06:46:37 dut.10.240.176.196:
17/10/2019 06:46:37 tester:
17/10/2019 06:46:37 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 06:46:50 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:46:50 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:46:50 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:46:50 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:46:50 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
17/10/2019 06:46:50 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
Port 0: link state change event
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 06:46:50 dut.10.240.176.196: stop
17/10/2019 06:46:50 dut.10.240.176.196: stop
Packet forwarding not started
17/10/2019 06:46:50 dut.10.240.176.196: quit
17/10/2019 06:46:54 dut.10.240.176.196:
Port 1: link state change event
quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 06:46:54 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
17/10/2019 06:46:54 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:46:57 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 06:46:57 dut.10.240.176.196:
17/10/2019 06:46:57 tester:
17/10/2019 06:46:57 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 06:47:10 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:47:10 dut.10.240.176.196: vlan set filter off 0
17/10/2019 06:47:10 dut.10.240.176.196: vlan set filter off 0
17/10/2019 06:47:10 dut.10.240.176.196: set fwd csum
17/10/2019 06:47:10 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 06:47:10 dut.10.240.176.196: port stop all
17/10/2019 06:47:10 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:47:10 dut.10.240.176.196: port stop all
17/10/2019 06:47:10 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 06:47:10 dut.10.240.176.196: csum set ip hw 1
17/10/2019 06:47:10 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 06:47:10 dut.10.240.176.196: port start all
17/10/2019 06:47:11 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:47:11 dut.10.240.176.196: port stop all
17/10/2019 06:47:11 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:47:11 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 06:47:11 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:47:11 dut.10.240.176.196: port start all
17/10/2019 06:47:11 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:47:11 dut.10.240.176.196: port stop all
17/10/2019 06:47:12 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:47:12 dut.10.240.176.196: csum set udp hw 1
17/10/2019 06:47:12 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:47:12 dut.10.240.176.196: port start all
17/10/2019 06:47:12 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:47:12 dut.10.240.176.196: port stop all
17/10/2019 06:47:12 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:47:12 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 06:47:12 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:47:12 dut.10.240.176.196: port start all
17/10/2019 06:47:13 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:47:13 dut.10.240.176.196: port stop all
17/10/2019 06:47:13 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 06:47:13 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 06:47:13 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:47:13 dut.10.240.176.196: port start all
17/10/2019 06:47:13 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 06:47:13 dut.10.240.176.196: port start all
17/10/2019 06:47:13 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 06:47:13 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 06:47:13 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 06:47:13 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:47:14 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 06:47:14 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:47:14 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 06:47:24 TestVxlan: chksums_ref{}
17/10/2019 06:47:24 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 06:47:24 dut.10.240.176.196: start
17/10/2019 06:47:24 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:47:24 tester: ls -d /tmp/tester/
17/10/2019 06:47:24 tester: /tmp/tester/
17/10/2019 06:47:24 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:47:24 tester:
17/10/2019 06:47:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266049.79 root@10.240.176.173:/tmp/tester/
17/10/2019 06:47:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266049.79 root@10.240.176.173:/tmp/tester/
17/10/2019 06:47:32 tester: python /tmp/tester/scapy_ens160f0.cmd1571266049.79
17/10/2019 06:47:33 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:47:51 TestVxlan: chksums{}
17/10/2019 06:47:51 dut.10.240.176.196: stop
17/10/2019 06:47:52 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:48:02 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:48:02 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 06:48:02 dut.10.240.176.196: start
17/10/2019 06:48:02 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:48:02 tester: ls -d /tmp/tester/
17/10/2019 06:48:02 tester: /tmp/tester/
17/10/2019 06:48:02 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:48:02 tester:
17/10/2019 06:48:07 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266087.65 root@10.240.176.173:/tmp/tester/
17/10/2019 06:48:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266087.65 root@10.240.176.173:/tmp/tester/
17/10/2019 06:48:10 tester: python /tmp/tester/scapy_ens160f0.cmd1571266087.65
17/10/2019 06:48:11 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:48:29 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:48:29 dut.10.240.176.196: stop
17/10/2019 06:48:29 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:48:40 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:48:40 TestVxlan: vxlan packet [outer_ip_invalid = 1]
17/10/2019 06:48:40 dut.10.240.176.196: start
17/10/2019 06:48:40 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:48:40 tester: ls -d /tmp/tester/
17/10/2019 06:48:40 tester: /tmp/tester/
17/10/2019 06:48:40 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:48:40 tester:
17/10/2019 06:48:45 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266125.55 root@10.240.176.173:/tmp/tester/
17/10/2019 06:48:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266125.55 root@10.240.176.173:/tmp/tester/
17/10/2019 06:48:48 tester: python /tmp/tester/scapy_ens160f0.cmd1571266125.55
17/10/2019 06:48:49 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:49:07 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:49:07 dut.10.240.176.196: stop
17/10/2019 06:49:07 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:49:17 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:49:17 TestVxlan: vxlan packet [inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 06:49:17 dut.10.240.176.196: start
17/10/2019 06:49:18 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:49:18 tester: ls -d /tmp/tester/
17/10/2019 06:49:18 tester: /tmp/tester/
17/10/2019 06:49:18 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:49:18 tester:
17/10/2019 06:49:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266163.43 root@10.240.176.173:/tmp/tester/
17/10/2019 06:49:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266163.43 root@10.240.176.173:/tmp/tester/
17/10/2019 06:49:26 tester: python /tmp/tester/scapy_ens160f0.cmd1571266163.43
17/10/2019 06:49:26 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:49:45 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:49:45 dut.10.240.176.196: stop
17/10/2019 06:49:45 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:49:55 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:49:55 TestVxlan: vxlan packet [inner_l4_invalid = 1]
17/10/2019 06:49:55 dut.10.240.176.196: start
17/10/2019 06:49:55 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:49:55 tester: ls -d /tmp/tester/
17/10/2019 06:49:56 tester: /tmp/tester/
17/10/2019 06:49:56 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:49:56 tester:
17/10/2019 06:50:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266201.31 root@10.240.176.173:/tmp/tester/
17/10/2019 06:50:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266201.31 root@10.240.176.173:/tmp/tester/
17/10/2019 06:50:04 tester: python /tmp/tester/scapy_ens160f0.cmd1571266201.31
17/10/2019 06:50:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:50:23 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:50:23 dut.10.240.176.196: stop
17/10/2019 06:50:23 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:50:33 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:50:33 TestVxlan: vxlan packet [inner_l4_type = TCP][inner_l4_invalid = 1]
17/10/2019 06:50:33 dut.10.240.176.196: start
17/10/2019 06:50:33 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:50:33 tester: ls -d /tmp/tester/
17/10/2019 06:50:34 tester: /tmp/tester/
17/10/2019 06:50:34 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:50:34 tester:
17/10/2019 06:50:39 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266239.27 root@10.240.176.173:/tmp/tester/
17/10/2019 06:50:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266239.27 root@10.240.176.173:/tmp/tester/
17/10/2019 06:50:42 tester: python /tmp/tester/scapy_ens160f0.cmd1571266239.27
17/10/2019 06:50:42 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 06:51:01 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 06:51:01 dut.10.240.176.196: stop
17/10/2019 06:51:01 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:51:11 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 06:51:11 TestVxlan: vxlan packet [inner_l4_type = SCTP][inner_l4_invalid = 1]
17/10/2019 06:51:11 dut.10.240.176.196: start
17/10/2019 06:51:11 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:51:11 tester: ls -d /tmp/tester/
17/10/2019 06:51:12 tester: /tmp/tester/
17/10/2019 06:51:12 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:51:12 tester:
17/10/2019 06:51:17 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266277.21 root@10.240.176.173:/tmp/tester/
17/10/2019 06:51:18 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266277.21 root@10.240.176.173:/tmp/tester/
17/10/2019 06:51:20 tester: python /tmp/tester/scapy_ens160f0.cmd1571266277.21
17/10/2019 06:51:20 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 06:51:39 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 06:51:39 dut.10.240.176.196: stop
17/10/2019 06:51:39 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:51:49 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:51:49 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip_invalid = 1]
17/10/2019 06:51:49 dut.10.240.176.196: start
17/10/2019 06:51:49 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:51:49 tester: ls -d /tmp/tester/
17/10/2019 06:51:49 tester: /tmp/tester/
17/10/2019 06:51:49 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:51:50 tester:
17/10/2019 06:51:55 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266315.14 root@10.240.176.173:/tmp/tester/
17/10/2019 06:51:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266315.14 root@10.240.176.173:/tmp/tester/
17/10/2019 06:51:57 tester: python /tmp/tester/scapy_ens160f0.cmd1571266315.14
17/10/2019 06:51:58 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:52:17 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:52:17 dut.10.240.176.196: stop
17/10/2019 06:52:17 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:52:27 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:52:27 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1]
17/10/2019 06:52:27 dut.10.240.176.196: start
17/10/2019 06:52:27 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:52:27 tester: ls -d /tmp/tester/
17/10/2019 06:52:27 tester: /tmp/tester/
17/10/2019 06:52:27 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:52:28 tester:
17/10/2019 06:52:33 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266353.1 root@10.240.176.173:/tmp/tester/
17/10/2019 06:52:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266353.1 root@10.240.176.173:/tmp/tester/
17/10/2019 06:52:35 tester: python /tmp/tester/scapy_ens160f0.cmd1571266353.1
17/10/2019 06:52:36 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:52:55 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:52:55 dut.10.240.176.196: stop
17/10/2019 06:52:55 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 06:53:05 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 06:53:05 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 06:53:05 dut.10.240.176.196: start
17/10/2019 06:53:05 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 06:53:05 tester: ls -d /tmp/tester/
17/10/2019 06:53:05 tester: /tmp/tester/
17/10/2019 06:53:05 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 06:53:05 tester:
17/10/2019 06:53:11 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266391.05 root@10.240.176.173:/tmp/tester/
17/10/2019 06:53:12 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266391.05 root@10.240.176.173:/tmp/tester/
17/10/2019 06:53:13 tester: python /tmp/tester/scapy_ens160f0.cmd1571266391.05
17/10/2019 06:53:14 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 06:53:33 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 682, in test_vxlan_ipv4_checksum_offload
outer_vlan=1, outer_ip_invalid=1, inner_ip_invalid=1)
File "tests/TestSuite_vxlan.py", line 452, in send_and_check
chksums = config.get_chksums(pkt=pkt)
File "tests/TestSuite_vxlan.py", line 203, in get_chksums
if pkt[0].guess_payload_class(pkt[0]).name == "802.1Q":
TypeError: 'NoneType' object has no attribute '__getitem__'
17/10/2019 06:53:33 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:53:38 dut.10.240.176.196:
17/10/2019 06:53:39 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 06:53:39 dut.10.240.176.196:
17/10/2019 06:53:39 tester:
17/10/2019 06:53:39 dut.10.240.176.196: cat config/common_base
17/10/2019 06:53:40 dut.10.240.176.196: Killed
17/10/2019 06:53:50 TestVxlan: Test Case test_vxlan_ipv4_detect Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 528, in test_vxlan_ipv4_detect
src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
AttributeError: 'NoneType' object has no attribute 'group'
17/10/2019 06:53:50 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:53:53 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 06:53:56 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 07:00:07 dts:
TEST SUITE : TestVxlan
17/10/2019 07:00:07 dts: NIC : fortville_eagle
17/10/2019 07:00:07 dut.10.240.176.196:
17/10/2019 07:00:07 tester:
17/10/2019 07:00:07 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 07:00:07 dut.10.240.176.196:
17/10/2019 07:00:07 tester:
17/10/2019 07:00:07 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 07:00:23 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:00:23 dut.10.240.176.196: vlan set filter off 0
17/10/2019 07:00:23 dut.10.240.176.196: vlan set filter off 0
17/10/2019 07:00:23 dut.10.240.176.196: set fwd csum
17/10/2019 07:00:23 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 07:00:23 dut.10.240.176.196: port stop all
17/10/2019 07:00:23 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 07:00:23 dut.10.240.176.196: port stop all
17/10/2019 07:00:23 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 07:00:23 dut.10.240.176.196: csum set ip hw 1
17/10/2019 07:00:23 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 07:00:23 dut.10.240.176.196: port start all
17/10/2019 07:00:24 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:00:24 dut.10.240.176.196: port stop all
17/10/2019 07:00:24 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:00:24 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 07:00:24 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:00:24 dut.10.240.176.196: port start all
17/10/2019 07:00:24 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:00:24 dut.10.240.176.196: port stop all
17/10/2019 07:00:25 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:00:25 dut.10.240.176.196: csum set udp hw 1
17/10/2019 07:00:25 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:00:25 dut.10.240.176.196: port start all
17/10/2019 07:00:25 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:00:25 dut.10.240.176.196: port stop all
17/10/2019 07:00:25 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:00:25 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 07:00:25 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:00:25 dut.10.240.176.196: port start all
17/10/2019 07:00:26 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:00:26 dut.10.240.176.196: port stop all
17/10/2019 07:00:26 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:00:26 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 07:00:26 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:00:26 dut.10.240.176.196: port start all
17/10/2019 07:00:26 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:00:26 dut.10.240.176.196: port start all
17/10/2019 07:00:26 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 07:00:26 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 07:00:26 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:00:26 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:00:27 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:00:27 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:00:27 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:00:37 TestVxlan: chksums_ref{}
17/10/2019 07:00:37 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 07:00:37 dut.10.240.176.196: start
17/10/2019 07:00:37 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:00:37 tester: ls -d /tmp/tester/
17/10/2019 07:00:37 tester: /tmp/tester/
17/10/2019 07:00:37 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:00:37 tester:
17/10/2019 07:00:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266842.86 root@10.240.176.173:/tmp/tester/
17/10/2019 07:00:44 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266842.86 root@10.240.176.173:/tmp/tester/
17/10/2019 07:00:45 tester: python /tmp/tester/scapy_ens160f0.cmd1571266842.86
17/10/2019 07:00:46 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:01:05 TestVxlan: chksums{}
17/10/2019 07:01:05 dut.10.240.176.196: stop
17/10/2019 07:01:05 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:01:15 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:01:15 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 07:01:15 dut.10.240.176.196: start
17/10/2019 07:01:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:01:15 tester: ls -d /tmp/tester/
17/10/2019 07:01:15 tester: /tmp/tester/
17/10/2019 07:01:15 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:01:15 tester:
17/10/2019 07:01:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266880.76 root@10.240.176.173:/tmp/tester/
17/10/2019 07:01:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266880.76 root@10.240.176.173:/tmp/tester/
17/10/2019 07:01:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571266880.76
17/10/2019 07:01:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:01:42 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:01:42 dut.10.240.176.196: stop
17/10/2019 07:01:43 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:01:53 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:01:53 TestVxlan: vxlan packet [outer_ip_invalid = 1]
17/10/2019 07:01:53 dut.10.240.176.196: start
17/10/2019 07:01:53 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:01:53 tester: ls -d /tmp/tester/
17/10/2019 07:01:53 tester: /tmp/tester/
17/10/2019 07:01:53 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:01:53 tester:
17/10/2019 07:01:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266918.66 root@10.240.176.173:/tmp/tester/
17/10/2019 07:02:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266918.66 root@10.240.176.173:/tmp/tester/
17/10/2019 07:02:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571266918.66
17/10/2019 07:02:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:02:20 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:02:20 dut.10.240.176.196: stop
17/10/2019 07:02:20 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:02:30 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:02:30 TestVxlan: vxlan packet [inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 07:02:30 dut.10.240.176.196: start
17/10/2019 07:02:31 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:02:31 tester: ls -d /tmp/tester/
17/10/2019 07:02:31 tester: /tmp/tester/
17/10/2019 07:02:31 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:02:31 tester:
17/10/2019 07:02:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266956.54 root@10.240.176.173:/tmp/tester/
17/10/2019 07:02:37 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266956.54 root@10.240.176.173:/tmp/tester/
17/10/2019 07:02:39 tester: python /tmp/tester/scapy_ens160f0.cmd1571266956.54
17/10/2019 07:02:40 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:02:58 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:02:58 dut.10.240.176.196: stop
17/10/2019 07:02:58 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:03:08 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:03:08 TestVxlan: vxlan packet [inner_l4_invalid = 1]
17/10/2019 07:03:08 dut.10.240.176.196: start
17/10/2019 07:03:09 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:03:09 tester: ls -d /tmp/tester/
17/10/2019 07:03:09 tester: /tmp/tester/
17/10/2019 07:03:09 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:03:09 tester:
17/10/2019 07:03:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571266994.43 root@10.240.176.173:/tmp/tester/
17/10/2019 07:03:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571266994.43 root@10.240.176.173:/tmp/tester/
17/10/2019 07:03:17 tester: python /tmp/tester/scapy_ens160f0.cmd1571266994.43
17/10/2019 07:03:17 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:03:36 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:03:36 dut.10.240.176.196: stop
17/10/2019 07:03:36 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:03:46 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 07:03:46 TestVxlan: vxlan packet [inner_l4_type = TCP][inner_l4_invalid = 1]
17/10/2019 07:03:46 dut.10.240.176.196: start
17/10/2019 07:03:46 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:03:46 tester: ls -d /tmp/tester/
17/10/2019 07:03:47 tester: /tmp/tester/
17/10/2019 07:03:47 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:03:47 tester:
17/10/2019 07:03:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267032.32 root@10.240.176.173:/tmp/tester/
17/10/2019 07:03:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267032.32 root@10.240.176.173:/tmp/tester/
17/10/2019 07:03:55 tester: python /tmp/tester/scapy_ens160f0.cmd1571267032.32
17/10/2019 07:03:55 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:04:14 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 07:04:14 dut.10.240.176.196: stop
17/10/2019 07:04:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:04:24 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 07:04:24 TestVxlan: vxlan packet [inner_l4_type = SCTP][inner_l4_invalid = 1]
17/10/2019 07:04:24 dut.10.240.176.196: start
17/10/2019 07:04:24 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:04:24 tester: ls -d /tmp/tester/
17/10/2019 07:04:25 tester: /tmp/tester/
17/10/2019 07:04:25 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:04:25 tester:
17/10/2019 07:04:30 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267070.2 root@10.240.176.173:/tmp/tester/
17/10/2019 07:04:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267070.2 root@10.240.176.173:/tmp/tester/
17/10/2019 07:04:32 tester: python /tmp/tester/scapy_ens160f0.cmd1571267070.2
17/10/2019 07:04:33 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 07:04:52 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 675, in test_vxlan_ipv4_checksum_offload
self.send_and_check(inner_l4_invalid=1, inner_l4_type='SCTP')
File "tests/TestSuite_vxlan.py", line 452, in send_and_check
chksums = config.get_chksums(pkt=pkt)
File "tests/TestSuite_vxlan.py", line 203, in get_chksums
if pkt[0].guess_payload_class(pkt[0]).name == "802.1Q":
TypeError: 'NoneType' object has no attribute '__getitem__'
17/10/2019 07:04:52 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:04:57 dut.10.240.176.196:
17/10/2019 07:04:57 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:05:01 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 07:09:00 dts:
TEST SUITE : TestVxlan
17/10/2019 07:09:00 dts: NIC : fortville_eagle
17/10/2019 07:09:00 dut.10.240.176.196:
17/10/2019 07:09:00 tester:
17/10/2019 07:09:00 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 07:09:00 dut.10.240.176.196:
17/10/2019 07:09:00 tester:
17/10/2019 07:09:00 dut.10.240.176.196: cat config/common_base
17/10/2019 07:09:00 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 07:09:20 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 07:09:20 dut.10.240.176.196:
17/10/2019 07:09:20 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 07:09:20 dut.10.240.176.196:
17/10/2019 07:09:20 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 07:09:21 dut.10.240.176.196:
17/10/2019 07:09:21 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 07:09:21 dut.10.240.176.196:
17/10/2019 07:09:21 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 07:09:21 dut.10.240.176.196:
17/10/2019 07:09:21 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 07:09:21 dut.10.240.176.196:
17/10/2019 07:09:21 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 07:09:21 dut.10.240.176.196:
17/10/2019 07:09:21 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 07:11:24 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_interrupts.o
CC eal_timer.o
CC eal_alarm.o
CC eal_common_lcore.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_jobstats
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_ring.h
CC rte_pci.o
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_cfgfile.h
CC rte_ring.o
CC rte_cfgfile.o
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_meter.h
CC rte_timer.o
CC rte_meter.o
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_stack.h
CC rte_metrics.o
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_stack.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_jobstats.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_metrics.a
AR librte_rcu.a
INSTALL-LIB librte_metrics.a
INSTALL-LIB librte_rcu.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_lpm
== Build lib/librte_efd
== Build lib/librte_member
AR librte_net.a
INSTALL-LIB librte_net.a
SYMLINK-FILE include/rte_efd.h
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
CC rte_efd.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_member.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_member.o
CC rte_member_ht.o
CC rte_lpm.o
CC rte_member_vbf.o
CC rte_lpm6.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
SYMLINK-FILE include/rte_ethdev.h
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline.h
CC ethdev_private.o
SYMLINK-FILE include/cmdline_parse.h
CC rte_ethdev.o
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
CC rte_class_eth.o
SYMLINK-FILE include/cmdline_parse_string.h
CC rte_flow.o
CC rte_tm.o
SYMLINK-FILE include/cmdline_rdline.h
CC rte_mtr.o
CC ethdev_profile.o
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC cmdline.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_latencystats.h
CC rte_gso.o
CC rte_pdump.o
CC gso_common.o
CC rte_latencystats.o
SYMLINK-FILE include/rte_distributor.h
CC gso_tcp4.o
CC gso_tunnel_tcp4.o
CC gso_udp4.o
CC rte_distributor_v20.o
CC rte_distributor.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_vhost.h
CC rte_gro.o
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_ip_frag.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC gro_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_kni.h
CC gro_vxlan_tcp4.o
CC fd_man.o
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_security.h
CC rte_bitrate.o
CC rte_ipv4_fragmentation.o
CC rte_security.o
CC bpf.o
CC rte_kni.o
CC bpf_exec.o
CC iotlb.o
CC socket.o
CC rte_ipv6_fragmentation.o
CC bpf_load.o
CC bpf_pkt.o
CC rte_ipv4_reassembly.o
CC rte_ipv6_reassembly.o
SYMLINK-FILE include/rte_event_ring.h
CC bpf_validate.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC bpf_jit_x86.o
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC rte_ip_frag_common.o
CC vhost.o
CC vhost_user.o
CC virtio_net.o
CC ip_frag_internal.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC vdpa.o
CC vhost_crypto.o
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
AR librte_gro.a
== Build lib/librte_ipsec
INSTALL-LIB librte_gro.a
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC ses.o
CC sa.o
AR librte_kni.a
AR librte_bpf.a
INSTALL-LIB librte_kni.a
INSTALL-LIB librte_bpf.a
== Build lib/librte_port
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_acl.o
CC rte_table_lpm_ipv6.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
HOSTCC pmdinfogen.o
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
SYMLINK-FILE include/dpaax_iova_table.h
CC otx2_irq.o
CC otx2_mbox.o
CC dpaax_iova_table.o
CC otx2_common.o
CC octeontx_mbox.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/vdev
== Build drivers/bus/pci
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_bus_ifpga.h
SYMLINK-FILE include/rte_vmbus_reg.h
SYMLINK-FILE include/rte_bus_vdev.h
CC ifpga_bus.o
CC vdev.o
CC ifpga_common.o
CC vdev_params.o
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC vmbus_common.o
CC vmbus_channel.o
SYMLINK-FILE include/rte_bus_pci.h
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC pci_params.o
CC linux/pci.o
CC linux/pci_uio.o
CC pci_common.o
CC linux/pci_vfio.o
CC pci_common_uio.o
CC dpaa_bus.o
CC base/fman/fman_hw.o
CC base/fman/fman.o
CC qbman/qbman_portal.o
CC base/fman/netcfg_layer.o
CC base/fman/of.o
CC qbman/qbman_debug.o
CC base/qbman/process.o
CC mc/dpmng.o
CC mc/dpio.o
CC base/qbman/bman.o
CC mc/mc_sys.o
CC mc/dpbp.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC mc/dpcon.o
CC mc/dpci.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC base/qbman/dpaa_sys.o
CC portal/dpaa2_hw_dpbp.o
Building modules, stage 2.
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
MODPOST 1 modules
Building modules, stage 2.
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
MODPOST 1 modules
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpci.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/stack
== Build drivers/mempool/ring
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC dpaa_mempool.o
CC rte_mempool_bucket.o
CC rte_mempool_stack.o
CC rte_mempool_ring.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/af_packet
== Build drivers/net/axgbe
== Build drivers/net/cxgbe
== Build drivers/net/bonding
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/baseband/null
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
== Build drivers/compress/octeontx
== Build drivers/net/enetc
== Build drivers/net/failsafe
== Build drivers/net/enic
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/crypto/scheduler
== Build drivers/crypto/octeontx
== Build drivers/crypto/null
== Build drivers/net/i40e
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
CC qat_comp.o
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
== Build drivers/net/memif
CC qat_comp_pmd.o
SYMLINK-FILE include/rte_eth_bond.h
CC atl_rxtx.o
CC iavf_adminq.o
CC axgbe_ethdev.o
SYMLINK-FILE include/rte_avp_common.h
SYMLINK-FILE include/rte_pmd_dpaa.h
CC bbdev_turbo_software.o
CC bbdev_null.o
CC ark_ddm.o
CC otx_zip_pmd.o
CC hinic_pmd_api_cmd.o
CC ena_ethdev.o
SYMLINK-FILE include/fpga_lte_fec.h
CC enetc_ethdev.o
CC failsafe.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC caam_jr.o
SYMLINK-FILE include/rte_avp_fifo.h
CC nitrox_device.o
CC lio_ethdev.o
CC hns3_ethdev.o
CC null_crypto_pmd.o
CC otx_cryptodev.o
CC cxgbe_ethdev.o
CC dpaa_sec.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC dpaa_ethdev.o
CC rte_eth_af_packet.o
CC fpga_lte_fec.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC rte_eth_bond_api.o
CC avp_ethdev.o
CC virtqueue.o
CC dpaa2_sec_dpseci.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC rte_eth_memif.o
CC ipn3ke_ethdev.o
CC base/dpaa2_hw_dpni.o
CC enic_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC scheduler_pmd.o
SYMLINK-FILE include/rte_pmd_ice.h
CC e1000_80003es2lan.o
CC i40e_adminq.o
CC fm10k_ethdev.o
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC iavf_common.o
CC e1000_82540.o
CC dpaa2_rxtx.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD nitrox_device.o
LD otx_cryptodev.o
CC nitrox_hal.o
CC otx_cryptodev_capabilities.o
CC qat_device.o
CC e1000_82541.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC hinic_pmd_cfg.o
CC scheduler_pmd_ops.o
CC nitrox_logs.o
CC failsafe_args.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
LD axgbe_ethdev.o
LD bbdev_null.o
CC axgbe_dev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC nitrox_sym.o
CC rte_cryptodev_scheduler.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD ipn3ke_ethdev.o
CC ipn3ke_representor.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC virtio_pci.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
PMDINFO otx_zip_pmd.o.pmd.c
PMDINFO ark_ethdev.o.pmd.c
CC otx_zip_pmd.o.pmd.o
CC ark_ethdev.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD otx_zip_pmd.o
LD ark_ethdev.o
LD enic_ethdev.o
CC otx_zip.o
CC ark_ethdev_rx.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC enic_main.o
LD bbdev_turbo_software.o
CC rte_eth_bond_pmd.o
CC e1000_82542.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC qat_common.o
LD dpaa_ethdev.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC dpaa_rxtx.o
LD enetc_ethdev.o
CC otx_cryptodev_hw_access.o
CC enetc_rxtx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC lio_rxtx.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC e1000_82543.o
CC e1000_82571.o
LD fpga_lte_fec.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC hinic_pmd_cmdq.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC hinic_pmd_eqs.o
CC lio_23xx_vf.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC cxgbevf_ethdev.o
CC cxgbe_main.o
CC atl_ethdev.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC virtio_rxtx.o
CC memif_socket.o
CC lio_mbox.o
CC ixgbe_82598.o
CC failsafe_eal.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC failsafe_ops.o
CC qat_logs.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC qat_qp.o
CC e1000_82575.o
CC e1000_i210.o
CC e1000_api.o
CC nitrox_sym_capabilities.o
CC otx_cryptodev_mbox.o
CC otx_cryptodev_ops.o
CC iavf_ethdev.o
CC axgbe_mdio.o
CC hinic_pmd_hwdev.o
CC ixgbe_82599.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC hns3_ethdev_vf.o
LD fm10k_ethdev.o
CC virtio_cryptodev.o
CC nitrox_sym_reqmgr.o
CC dpaa2_ethdev.o
CC fm10k_rxtx.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC iavf_vchnl.o
CC i40e_common.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC i40e_diag.o
CC ice_common.o
CC ice_sched.o
CC scheduler_roundrobin.o
CC ipn3ke_tm.o
CC ark_ethdev_tx.o
CC ark_mpu.o
CC ark_pktchkr.o
CC enic_rxtx.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC atl_hw_regs.o
CC e1000_ich8lan.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD atl_ethdev.o
LD ena_ethdev.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC e1000_logs.o
CC ena_com.o
CC ena_eth_com.o
CC hw_atl_utils.o
CC ark_pktdir.o
CC ixgbe_x540.o
CC ixgbe_x550.o
CC cxgbevf_main.o
CC ixgbe_phy.o
CC nitrox_qp.o
CC ixgbe_api.o
CC axgbe_phy_impl.o
CC ixgbe_vf.o
CC ixgbe_hv_vf.o
CC hinic_pmd_hwif.o
CC scheduler_pkt_size_distr.o
CC scheduler_failover.o
CC scheduler_multicore.o
CC ixgbe_dcb.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
LD hns3_ethdev_vf.o
CC ixgbe_dcb_82599.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC hns3_cmd.o
CC hns3_mbx.o
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC ixgbe_dcb_82598.o
CC enic_clsf.o
CC enic_res.o
CC iavf_rxtx.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC iavf_rxtx_vec_sse.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC sge.o
CC ark_pktgen.o
CC dpaa2_flow.o
CC ipn3ke_flow.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC ixgbe_mbx.o
CC ixgbe_rxtx.o
CC hw_atl_llh.o
CC ixgbe_ethdev.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
CC hinic_pmd_mgmt.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC dpaa2_mux.o
CC mc/dpseci.o
CC dpaa2_sparser.o
CC ixgbe_fdir.o
CC caam_jr_capabilities.o
CC caam_jr_hw.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC hinic_pmd_wq.o
CC e1000_mac.o
CC ixgbe_pf.o
CC ixgbe_flow.o
CC axgbe_i2c.o
CC hns3_rxtx.o
CC ixgbe_rxtx_vec_sse.o
CC hw_atl_utils_fw2x.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD caam_jr.o
LD rte_eth_bond_pmd.o
CC hw_atl_b0.o
CC rte_eth_bond_args.o
CC caam_jr_uio.o
CC fm10k_pf.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC fm10k_tlv.o
LD dpaa2_mux.o
CC ark_rqp.o
CC ark_udm.o
== Build drivers/net/netvsc
CC rte_eth_bond_8023ad.o
CC rte_eth_bond_alb.o
CC e1000_manage.o
CC hns3_rss.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC axgbe_rxtx.o
LD iavf_ethdev.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
== Build drivers/net/nfp
== Build drivers/net/bnxt
CC hinic_pmd_ethdev.o
CC fm10k_common.o
CC enic_flow.o
CC hn_ethdev.o
== Build drivers/net/null
CC base/vnic_cq.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC base/vnic_wq.o
CC hn_rxtx.o
CC e1000_mbx.o
CC hn_rndis.o
CC i40e_hmc.o
CC i40e_lan_hmc.o
CC fm10k_mbx.o
CC nfp_cppcore.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC rte_pmd_atlantic.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC hns3_flow.o
CC rte_eth_null.o
CC mc/dpni.o
CC mc/dpkg.o
CC mc/dpdmux.o
CC fm10k_vf.o
CC e1000_nvm.o
CC e1000_osdep.o
CC e1000_phy.o
CC i40e_nvm.o
CC i40e_dcb.o
CC i40e_ethdev.o
CC fm10k_api.o
CC fm10k_rxtx_vec.o
CC base/vnic_dev.o
CC base/vnic_intr.o
CC base/vnic_rq.o
CC enic_rxtx_vec_avx2.o
CC i40e_rxtx.o
CC i40e_ethdev_vf.o
CC ixgbe_ipsec.o
CC rte_pmd_ixgbe.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC ixgbe_tm.o
CC bnxt_ethdev.o
AR librte_pmd_atlantic.a
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
INSTALL-LIB librte_pmd_atlantic.a
CC ixgbe_vf_representor.o
LD dpaa_sec.o
CC hn_nvs.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC hns3_fdir.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC hns3_intr.o
== Build drivers/net/qede
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
CC nfp_cpp_pcie_ops.o
== Build drivers/net/ring
CC hinic_pmd_rx.o
CC hinic_pmd_tx.o
CC e1000_vf.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC otx2_rx.o
CC octeontx_rxtx.o
CC igb_ethdev.o
CC ice_switch.o
CC ice_nvm.o
CC ecore_dev.o
CC ecore_hw.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_bond_flow.o
CC rte_eth_ring.o
CC octeontx_pkovf.o
CC axgbe_rxtx_vec_sse.o
CC octeontx_pkivf.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC octeontx_bgx.o
CC octeontx_ethdev.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
LD octeontx_pkivf.o
CC hn_vf.o
== Build drivers/net/sfc
CC i40e_pf.o
CC hns3_stats.o
CC i40e_fdir.o
CC i40e_flow.o
CC rte_pmd_i40e.o
CC i40e_tm.o
CC i40e_vf_representor.o
CC nfp_mutex.o
CC nfp_resource.o
CC nfp_crc.o
CC sfc_ethdev.o
CC hns3_regs.o
CC hns3_dcb.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC hns3_mp.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC nfp_mip.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
PMDINFO rte_eth_ring.o.pmd.c
LD ixgbe_ethdev.o
CC rte_eth_ring.o.pmd.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_ring.o
LD rte_eth_null.o
AR librte_pmd_ring.a
CC nfp_nffw.o
CC igb_rxtx.o
AR librte_pmd_null.a
PMDINFO i40e_ethdev_vf.o.pmd.c
INSTALL-LIB librte_pmd_ring.a
CC i40e_ethdev_vf.o.pmd.o
INSTALL-LIB librte_pmd_null.a
CC nfp_hwinfo.o
CC nfp_rtsym.o
LD i40e_ethdev_vf.o
AR librte_pmd_axgbe.a
CC nfp_nsp.o
INSTALL-LIB librte_pmd_axgbe.a
CC nfp_nsp_cmds.o
CC igb_pf.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC igb_flow.o
== Build drivers/net/tap
== Build drivers/net/thunderx
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC nfp_nsp_eth.o
CC nfp_net.o
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
CC bnxt_filter.o
CC bnxt_flow.o
CC bnxt_hwrm.o
CC nicvf_rxtx.o
CC nicvf_hw.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC failsafe_rxtx.o
CC vdev_netvsc.o
CC virtqueue.o
CC virtio_pci.o
CC virtio_rxtx.o
CC virtio_ethdev.o
CC ecore_cxt.o
CC ecore_l2.o
CC rte_eth_tap.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
LD bnxt_ethdev.o
CC tap_flow.o
CC tap_netlink.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC tap_tcmsgs.o
CC bnxt_ring.o
CC bnxt_rxq.o
CC bnxt_rxr.o
CC bnxt_stats.o
CC tap_bpf_api.o
CC tap_intr.o
CC ecore_sp_commands.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC nicvf_mbox.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC failsafe_ether.o
CC virtio_rxtx_simple.o
CC cxgbe_filter.o
CC cxgbe_flow.o
CC virtio_rxtx_simple_sse.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
CC em_ethdev.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC em_rxtx.o
CC virtio_user/vhost_user.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC sfc_kvargs.o
CC t4_hw.o
CC clip_tbl.o
CC mps_tcam.o
CC l2t.o
CC t4vf_hw.o
CC failsafe_flow.o
CC failsafe_intr.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC ecore_init_ops.o
CC ecore_mcp.o
CC sfc.o
CC ecore_int.o
CC bnxt_txq.o
AR librte_pmd_hinic.a
== Build drivers/net/vmxnet3
INSTALL-LIB librte_pmd_hinic.a
CC virtio_user/vhost_kernel.o
CC nicvf_ethdev.o
CC nicvf_bsvf.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC sfc_mcdi.o
CC virtio_user_ethdev.o
== Build drivers/net/kni
CC vmxnet3_rxtx.o
== Build drivers/net/softnic
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD virtio_ethdev.o
LD em_ethdev.o
== Build drivers/net/vhost
CC nicvf_svf.o
== Build drivers/net/ifc
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC otx2_tx.o
CC bnxt_txr.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC otx2_tm.o
CC otx2_rss.o
CC ice_flex_pipe.o
CC rte_eth_kni.o
CC otx2_mac.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC otx2_ptp.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC ice_flow.o
CC ice_dcb.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC ice_fdir.o
CC otx2_flow.o
CC ifcvf_vdpa.o
CC ecore_dcbx.o
CC bcm_osal.o
CC ecore_sriov.o
CC ifcvf.o
CC otx2_link.o
CC otx2_vlan.o
CC sfc_intr.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
CC ice_ethdev.o
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
LD rte_eth_kni.o
AR librte_pmd_kni.a
CC rte_eth_softnic_link.o
INSTALL-LIB librte_pmd_kni.a
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
AR librte_pmd_e1000.a
LD rte_eth_softnic.o
INSTALL-LIB librte_pmd_e1000.a
CC rte_eth_softnic_tm.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC bnxt_vnic.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC bnxt_irq.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
CC sfc_ev.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC bnxt_rxtx_vec_sse.o
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
CC rte_eth_softnic_pipeline.o
CC sfc_port.o
CC sfc_rx.o
CC sfc_tx.o
CC sfc_tso.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC sfc_filter.o
CC sfc_flow.o
CC qede_rxtx.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
LD rte_eth_vhost.o
AR librte_pmd_cxgbe.a
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
INSTALL-LIB librte_pmd_cxgbe.a
CC qede_filter.o
CC sfc_dp.o
CC vmxnet3_ethdev.o
CC rte_eth_softnic_thread.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
CC otx2_stats.o
INSTALL-LIB librte_pmd_tap.a
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC sfc_ef10_rx.o
CC rte_eth_softnic_cli.o
CC rte_eth_softnic_flow.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC efx_crc32.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC efx_ev.o
CC efx_evb.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
CC conn.o
CC efx_filter.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC efx_hash.o
LD vmxnet3_ethdev.o
CC efx_intr.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
AR librte_pmd_bnxt.a
CC mcdi_mon.o
INSTALL-LIB librte_pmd_bnxt.a
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
CC ef10_phy.o
LD otx2_ethdev.o
CC ef10_proxy.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/octeontx2
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC skeleton_eventdev.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC dpaa_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC sw_evdev.o
CC opdl_ring.o
CC sw_evdev_worker.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC otx2_tim_worker.o
CC sw_evdev_scheduler.o
CC otx2_evdev.o
CC opdl_evdev_xstats.o
CC sw_evdev_xstats.o
CC opdl_test.o
CC sw_evdev_selftest.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD timvf_probe.o
LD sw_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD dpaa2_hw_dpcon.o
LD ssovf_probe.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_octeontx_ssovf.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
INSTALL-LIB librte_pmd_octeontx_ssovf.a
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
CC ntb.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/pdump
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-acl
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC test_bbdev.o
CC test_bbdev_perf.o
CC main.o
CC main.o
CC test_bbdev_vector.o
CC config.o
CC init.o
CC runtime.o
CC pipeline_stub.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC cmdline_test.o
CC commands.o
CC evt_main.o
CC main.o
CC cperf_ops.o
CC evt_options.o
CC main.o
CC cperf_options_parsing.o
CC comp_perf_options_parse.o
CC evt_test.o
CC comp_perf_test_verify.o
CC parser.o
CC test_order_common.o
CC comp_perf_test_benchmark.o
CC cperf_test_vectors.o
CC main.o
CC cperf_test_throughput.o
CC test_order_queue.o
CC cperf_test_latency.o
CC pipeline_lpm_ipv6.o
CC comp_perf_test_common.o
CC pipeline_acl.o
CC test_order_atq.o
CC testpmd.o
CC test_perf_common.o
LD cmdline_test
CC parameters.o
CC commands.o
CC test.o
CC resource.o
CC test_perf_queue.o
CC test_perf_atq.o
CC test_resource.o
CC test_prefetch.o
CC test_pipeline_common.o
LD testacl
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
CC test_barrier.o
LD dpdk-procinfo
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC cperf_test_pmd_cyclecount.o
CC cperf_test_verify.o
CC cperf_test_vector_parsing.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC cmdline.o
CC cmdline_flow.o
CC test_spinlock.o
CC cperf_test_common.o
CC test_ticketlock.o
CC test_memory.o
CC test_memzone.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_bitmap.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC cmdline_mtr.o
CC test_fbarray.o
LD dpdk-pdump
LD testpipeline
CC cmdline_tm.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC config.o
CC iofwd.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC macfwd.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_table_acl.o
CC test_flow_classify.o
CC macswap.o
CC test_rwlock.o
CC test_stack.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
LD dpdk-test-eventdev
CC test_mempool.o
CC flowgen.o
INSTALL-APP dpdk-pdump
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
INSTALL-MAP dpdk-pdump.map
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC rxonly.o
CC txonly.o
CC csumonly.o
CC icmpecho.o
CC noisy_vnf.o
CC bpf_cmd.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC util.o
CC softnicfwd.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
LD dpdk-test-crypto-perf
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 07:11:24 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:11:36 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:11:36 dut.10.240.176.196: set fwd rxonly
17/10/2019 07:11:36 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 07:11:36 dut.10.240.176.196: set verbose 1
17/10/2019 07:11:36 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 07:11:36 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:11:36 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:11:36 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:11:36 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:11:36 TestVxlan: send vxlan pkts [outer_udp_dst = 1234]
17/10/2019 07:11:36 dut.10.240.176.196: start
17/10/2019 07:11:36 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:11:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267496.71 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:38 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267496.71 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:39 tester: python /tmp/tester/scapy_ens160f0.cmd1571267496.71
17/10/2019 07:11:40 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63338, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:11:42 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:11:42 TestVxlan: send vxlan pkts [inner_l4_type = UDP]
17/10/2019 07:11:42 dut.10.240.176.196: start
17/10/2019 07:11:42 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:11:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267502.41 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267502.41 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:45 tester: python /tmp/tester/scapy_ens160f0.cmd1571267502.41
17/10/2019 07:11:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:11:47 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:11:47 TestVxlan: send vxlan pkts [inner_l4_type = TCP]
17/10/2019 07:11:47 dut.10.240.176.196: start
17/10/2019 07:11:48 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:11:48 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267508.02 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:49 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267508.02 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:50 tester: python /tmp/tester/scapy_ens160f0.cmd1571267508.02
17/10/2019 07:11:51 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=40309)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:11:53 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:11:53 TestVxlan: send vxlan pkts [inner_l4_type = SCTP]
17/10/2019 07:11:53 dut.10.240.176.196: start
17/10/2019 07:11:53 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:11:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267513.61 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:54 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267513.61 root@10.240.176.173:/tmp/tester/
17/10/2019 07:11:56 tester: python /tmp/tester/scapy_ens160f0.cmd1571267513.61
17/10/2019 07:11:57 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=4564)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 07:11:59 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=128 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:11:59 TestVxlan: send vxlan pkts [outer_vlan = 1]
17/10/2019 07:11:59 dut.10.240.176.196: start
17/10/2019 07:11:59 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:11:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267519.2 root@10.240.176.173:/tmp/tester/
17/10/2019 07:12:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267519.2 root@10.240.176.173:/tmp/tester/
17/10/2019 07:12:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571267519.2
17/10/2019 07:12:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:12:04 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:12:04 TestVxlan: send vxlan pkts [outer_vlan = 1][inner_vlan = 1]
17/10/2019 07:12:04 dut.10.240.176.196: start
17/10/2019 07:12:04 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:12:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267524.8 root@10.240.176.173:/tmp/tester/
17/10/2019 07:12:06 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267524.8 root@10.240.176.173:/tmp/tester/
17/10/2019 07:12:07 tester: python /tmp/tester/scapy_ens160f0.cmd1571267524.8
17/10/2019 07:12:08 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:12:10 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=118 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:12:10 dut.10.240.176.196: stop
17/10/2019 07:12:10 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 6 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:12:10 dut.10.240.176.196: quit
17/10/2019 07:12:13 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:12:13 dut.10.240.176.196: cat config/common_base
17/10/2019 07:12:14 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 07:12:14 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 07:12:14 dut.10.240.176.196:
17/10/2019 07:12:14 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 07:12:14 dut.10.240.176.196:
17/10/2019 07:12:14 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 07:12:14 dut.10.240.176.196:
17/10/2019 07:12:14 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 07:12:14 dut.10.240.176.196:
17/10/2019 07:12:14 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 07:12:14 dut.10.240.176.196:
17/10/2019 07:12:14 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 07:12:15 dut.10.240.176.196:
17/10/2019 07:12:15 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 07:12:15 dut.10.240.176.196:
17/10/2019 07:12:15 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 07:14:17 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio_mp_sync.o
CC eal_vfio.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_interrupts.o
CC eal_timer.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_memalloc.o
CC eal_common_mcfg.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_meter.h
CC rte_meter.o
SYMLINK-FILE include/rte_pci.h
CC rte_pci.o
SYMLINK-FILE include/rte_cfgfile.h
CC rte_cfgfile.o
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_metrics.h
CC rte_timer.o
CC rte_metrics.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_jobstats.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_jobstats.o
SYMLINK-FILE include/rte_ring.h
CC rte_stack.o
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
CC rte_stack_std.o
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_stack_lf.o
CC rte_ring.o
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
SYMLINK-FILE include/rte_ip.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_member
== Build lib/librte_lpm
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/cmdline_parse_portlist.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
CC cmdline.o
SYMLINK-FILE include/rte_tm_driver.h
CC cmdline_cirbuf.o
CC cmdline_parse.o
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC ethdev_private.o
CC cmdline_parse_string.o
CC rte_ethdev.o
CC cmdline_rdline.o
CC rte_class_eth.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC rte_flow.o
CC rte_tm.o
CC cmdline_parse_portlist.o
CC rte_mtr.o
CC ethdev_profile.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_member.h
SYMLINK-FILE include/rte_efd.h
CC rte_member.o
CC rte_member_ht.o
CC rte_efd.o
CC rte_member_vbf.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_eventdev
== Build lib/librte_security
== Build lib/librte_rawdev
== Build lib/librte_ip_frag
== Build lib/librte_vhost
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_kni
== Build lib/librte_latencystats
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_gro.h
CC rte_gro.o
CC gro_tcp4.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_distributor.h
CC rte_distributor_v20.o
CC rte_distributor.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_security.o
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_kni.o
SYMLINK-FILE include/rte_latencystats.h
CC rte_bitrate.o
CC rte_rawdev.o
CC fd_man.o
CC rte_latencystats.o
CC bpf.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC iotlb.o
CC socket.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC vhost.o
CC bpf_exec.o
CC bpf_load.o
CC vhost_user.o
CC virtio_net.o
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_pdump.h
CC bpf_pkt.o
CC rte_pdump.o
SYMLINK-FILE include/rte_ip_frag.h
CC bpf_validate.o
CC rte_gso.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC gso_common.o
CC vdpa.o
SYMLINK-FILE include/rte_event_ring.h
CC rte_ipv4_fragmentation.o
CC vhost_crypto.o
CC bpf_jit_x86.o
CC rte_ipv6_fragmentation.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_event_timer_adapter.h
CC rte_ipv4_reassembly.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC rte_ipv6_reassembly.o
CC rte_ip_frag_common.o
CC gso_tunnel_tcp4.o
CC gso_udp4.o
CC ip_frag_internal.o
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC octeontx_mbox.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/ifpga
== Build drivers/bus/fslmc
== Build drivers/bus/pci
== Build drivers/bus/vmbus
== Build drivers/bus/vdev
SYMLINK-FILE include/rte_bus_pci.h
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vdev_params.o
CC linux/pci_vfio.o
CC linux/pci.o
CC pci_params.o
CC linux/pci_uio.o
CC pci_common.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC pci_common_uio.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
CC vmbus_common.o
CC dpaa_bus.o
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC vmbus_channel.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC vmbus_bufring.o
CC base/fman/netcfg_layer.o
CC base/fman/of.o
CC vmbus_common_uio.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC base/qbman/qman.o
CC mc/dpmng.o
CC mc/dpbp.o
CC base/qbman/qman_driver.o
CC mc/dpio.o
CC mc/mc_sys.o
CC base/qbman/dpaa_alloc.o
CC mc/dpcon.o
CC base/qbman/dpaa_sys.o
Building modules, stage 2.
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpci.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_stack.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC otx2_mempool_ops.o
CC rte_mempool_ring.o
CC otx2_mempool.o
CC dpaa2_hw_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC dpaa_mempool.o
CC rte_mempool_bucket.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/baseband/null
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/compress/octeontx
== Build drivers/net/bonding
== Build drivers/net/dpaa
== Build drivers/net/cxgbe
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hns3
== Build drivers/net/hinic
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/crypto/octeontx
== Build drivers/crypto/scheduler
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/net/liquidio
CC qat_comp.o
== Build drivers/net/netvsc
== Build drivers/net/nfp
== Build drivers/net/memif
CC bbdev_null.o
SYMLINK-FILE include/fpga_lte_fec.h
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC failsafe.o
SYMLINK-FILE include/rte_avp_common.h
CC bbdev_turbo_software.o
CC fpga_lte_fec.o
CC atl_rxtx.o
CC rte_eth_af_packet.o
CC dpaa_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC lio_ethdev.o
SYMLINK-FILE include/rte_avp_fifo.h
CC caam_jr.o
CC ark_ddm.o
CC axgbe_ethdev.o
CC rte_eth_memif.o
CC ena_ethdev.o
SYMLINK-FILE include/rte_eth_bond.h
CC ipn3ke_ethdev.o
CC enetc_ethdev.o
CC hn_ethdev.o
CC virtqueue.o
CC iavf_adminq.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC hinic_pmd_api_cmd.o
CC enic_ethdev.o
CC nfp_cppcore.o
CC avp_ethdev.o
CC null_crypto_pmd.o
CC cxgbe_ethdev.o
CC hns3_ethdev.o
CC base/dpaa2_hw_dpni.o
CC dpaa2_sec_dpseci.o
CC dpaa_sec.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC otx_cryptodev.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC rte_eth_bond_api.o
CC scheduler_pmd.o
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC e1000_80003es2lan.o
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ice.h
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC e1000_82540.o
CC dpaa2_rxtx.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD otx_cryptodev.o
CC otx_cryptodev_capabilities.o
CC qat_comp_pmd.o
CC e1000_82541.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC failsafe_args.o
CC scheduler_pmd_ops.o
CC hinic_pmd_cfg.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
LD bbdev_null.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC ice_common.o
LD axgbe_ethdev.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
CC axgbe_dev.o
LD ipn3ke_ethdev.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
CC virtio_pci.o
CC ipn3ke_representor.o
LD hn_ethdev.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC hn_rxtx.o
LD null_crypto_pmd.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
CC null_crypto_pmd_ops.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD otx_zip_pmd.o
LD enic_ethdev.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC nfp_cpp_pcie_ops.o
LD ark_ethdev.o
CC otx_zip.o
CC enic_main.o
CC e1000_82542.o
CC ark_ethdev_rx.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC rte_eth_bond_pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD bbdev_turbo_software.o
LD dpaa_ethdev.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC rte_cryptodev_scheduler.o
CC dpaa_rxtx.o
LD enetc_ethdev.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD fpga_lte_fec.o
CC enetc_rxtx.o
LD lio_ethdev.o
CC otx_cryptodev_hw_access.o
CC lio_rxtx.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC nfp_mutex.o
CC e1000_82543.o
CC qat_device.o
CC hinic_pmd_cmdq.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC ixgbe_82598.o
CC hinic_pmd_eqs.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
CC atl_ethdev.o
LD rte_eth_memif.o
== Build drivers/net/bnxt
CC virtio_rxtx.o
CC memif_socket.o
CC failsafe_eal.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC virtio_cryptodev.o
CC e1000_82571.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC ixgbe_82599.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC cxgbevf_ethdev.o
CC bnxt_cpr.o
CC otx_cryptodev_mbox.o
CC otx_cryptodev_ops.o
CC ipn3ke_tm.o
CC i40e_common.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC i40e_diag.o
LD fm10k_ethdev.o
CC fm10k_rxtx.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC qat_common.o
CC iavf_common.o
CC axgbe_mdio.o
CC nfp_resource.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC nfp_crc.o
CC e1000_82575.o
CC failsafe_ops.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
CC hinic_pmd_hwdev.o
LD hns3_ethdev.o
CC hinic_pmd_hwif.o
CC hns3_ethdev_vf.o
CC hns3_cmd.o
CC hns3_mbx.o
CC ark_ethdev_tx.o
CC ark_mpu.o
CC bnxt_ethdev.o
CC qat_logs.o
CC ixgbe_x540.o
CC ark_pktchkr.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC qat_qp.o
CC cxgbe_main.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC ark_pktdir.o
CC cxgbevf_main.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
CC ena_com.o
LD atl_ethdev.o
CC nfp_mip.o
CC dpaa2_ethdev.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC atl_hw_regs.o
CC failsafe_rxtx.o
LD virtio_cryptodev.o
CC dpaa2_flow.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC dpaa2_mux.o
CC ixgbe_x550.o
CC enic_rxtx.o
CC axgbe_phy_impl.o
CC hw_atl_utils.o
CC scheduler_roundrobin.o
CC e1000_i210.o
== Build drivers/net/null
CC e1000_api.o
CC iavf_ethdev.o
CC ipn3ke_flow.o
CC iavf_vchnl.o
CC lio_23xx_vf.o
CC nfp_nffw.o
CC caam_jr_capabilities.o
CC rte_eth_null.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC ark_pktgen.o
CC hns3_rxtx.o
CC e1000_ich8lan.o
AR librte_pmd_qat.a
CC e1000_logs.o
INSTALL-LIB librte_pmd_qat.a
CC e1000_mac.o
CC ice_sched.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC scheduler_pkt_size_distr.o
CC e1000_manage.o
CC dpaa2_sparser.o
CC ena_eth_com.o
CC hn_rndis.o
CC ark_rqp.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
CC hn_nvs.o
CC hn_vf.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
CC hw_atl_llh.o
LD avp_ethdev.o
CC sge.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC cxgbe_filter.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC caam_jr_hw.o
CC lio_mbox.o
CC ixgbe_phy.o
CC ixgbe_api.o
CC axgbe_i2c.o
AR librte_pmd_ena.a
CC caam_jr_uio.o
INSTALL-LIB librte_pmd_ena.a
CC hinic_pmd_nicio.o
CC fm10k_pf.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD rte_eth_bond_pmd.o
LD dpaa2_ethdev.o
CC rte_eth_bond_args.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
== Build drivers/net/octeontx
LD caam_jr.o
CC e1000_mbx.o
CC mc/dpni.o
CC ark_udm.o
AR librte_pmd_ipn3ke.a
CC hw_atl_utils_fw2x.o
INSTALL-LIB librte_pmd_ipn3ke.a
CC i40e_hmc.o
CC hinic_pmd_wq.o
CC hinic_pmd_ethdev.o
CC mc/dpkg.o
CC scheduler_failover.o
CC mc/dpseci.o
CC nfp_nsp.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC axgbe_rxtx.o
CC octeontx_rxtx.o
CC octeontx_pkovf.o
CC failsafe_ether.o
== Build drivers/net/octeontx2
== Build drivers/net/qede
CC ice_switch.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC ice_nvm.o
CC hinic_pmd_rx.o
CC hinic_pmd_tx.o
CC octeontx_pkivf.o
AR librte_pmd_lio.a
CC octeontx_bgx.o
INSTALL-LIB librte_pmd_lio.a
CC octeontx_ethdev.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC e1000_nvm.o
CC ixgbe_vf.o
AR librte_pmd_caam_jr.a
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
INSTALL-LIB librte_pmd_caam_jr.a
LD bnxt_ethdev.o
CC nfp_nsp_cmds.o
CC otx2_rx.o
LD octeontx_pkivf.o
CC bnxt_filter.o
CC nfp_nsp_eth.o
CC rte_eth_bond_8023ad.o
CC fm10k_tlv.o
CC nfp_net.o
CC hns3_rss.o
CC ecore_dev.o
CC ecore_hw.o
CC ecore_cxt.o
CC mc/dpdmux.o
CC bnxt_flow.o
CC i40e_lan_hmc.o
CC ixgbe_hv_vf.o
CC fm10k_common.o
CC e1000_osdep.o
CC e1000_phy.o
CC scheduler_multicore.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC i40e_nvm.o
CC i40e_dcb.o
CC hw_atl_b0.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC ixgbe_dcb.o
LD dpaa_sec.o
CC ixgbe_dcb_82599.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC ixgbe_dcb_82598.o
CC ixgbe_mbx.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC fm10k_mbx.o
CC fm10k_vf.o
CC fm10k_api.o
CC enic_clsf.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC enic_res.o
LD rte_eth_null.o
LD iavf_ethdev.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC iavf_rxtx.o
CC axgbe_rxtx_vec_sse.o
CC rte_pmd_atlantic.o
CC ecore_l2.o
CC ecore_sp_commands.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC failsafe_flow.o
LD hinic_pmd_ethdev.o
CC failsafe_intr.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC ecore_init_ops.o
CC ecore_mcp.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC hns3_flow.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC hns3_fdir.o
CC ixgbe_rxtx.o
CC fm10k_rxtx_vec.o
CC i40e_ethdev.o
CC otx2_tx.o
CC i40e_rxtx.o
CC ixgbe_ethdev.o
CC ecore_int.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC ecore_dcbx.o
CC ixgbe_fdir.o
CC enic_flow.o
CC e1000_vf.o
CC base/vnic_cq.o
AR librte_pmd_axgbe.a
CC bcm_osal.o
CC bnxt_hwrm.o
CC ixgbe_pf.o
CC base/vnic_wq.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
== Build drivers/net/ring
== Build drivers/net/sfc
== Build drivers/crypto/nitrox
CC i40e_rxtx_vec_sse.o
CC igb_ethdev.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC sfc_ethdev.o
CC nitrox_device.o
CC nitrox_hal.o
CC nitrox_logs.o
CC bnxt_ring.o
CC hns3_intr.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC rte_eth_bond_alb.o
LD nfp_net.o
CC ice_flex_pipe.o
CC bnxt_rxq.o
CC ecore_sriov.o
CC nitrox_sym.o
CC ecore_vf.o
AR librte_pmd_nfp.a
CC qede_ethdev.o
INSTALL-LIB librte_pmd_nfp.a
CC qede_main.o
== Build drivers/net/tap
CC base/vnic_dev.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
CC i40e_ethdev_vf.o
LD nitrox_device.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_hinic.a
CC nitrox_sym_capabilities.o
CC i40e_pf.o
CC iavf_rxtx_vec_sse.o
INSTALL-LIB librte_pmd_hinic.a
CC i40e_fdir.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC i40e_flow.o
CC rte_eth_bond_flow.o
CC bnxt_rxr.o
CC bnxt_stats.o
CC rte_eth_tap.o
CC tap_flow.o
CC hns3_stats.o
CC hns3_regs.o
CC nitrox_sym_reqmgr.o
CC nitrox_qp.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC bnxt_txq.o
CC bnxt_txr.o
CC bnxt_vnic.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC bnxt_irq.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC bnxt_util.o
CC tap_netlink.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC sfc_kvargs.o
CC cxgbe_flow.o
CC tap_tcmsgs.o
CC t4_hw.o
CC tap_bpf_api.o
CC hns3_dcb.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
AR librte_pmd_nitrox.a
CC hns3_mp.o
INSTALL-LIB librte_pmd_nitrox.a
LD igb_ethdev.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC igb_rxtx.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC igb_pf.o
CC igb_flow.o
CC em_ethdev.o
CC ixgbe_flow.o
== Build drivers/net/thunderx
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
== Build drivers/net/vdev_netvsc
LD i40e_ethdev_vf.o
CC otx2_tm.o
CC sfc.o
CC ixgbe_rxtx_vec_sse.o
CC otx2_rss.o
CC tap_intr.o
CC rte_pmd_i40e.o
CC otx2_mac.o
CC sfc_mcdi.o
CC nicvf_rxtx.o
CC vdev_netvsc.o
CC i40e_tm.o
CC nicvf_hw.o
CC nicvf_mbox.o
CC nicvf_ethdev.o
CC base/vnic_intr.o
CC base/vnic_rq.o
CC enic_rxtx_vec_avx2.o
CC clip_tbl.o
CC nicvf_bsvf.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC nicvf_svf.o
CC ixgbe_ipsec.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
== Build drivers/net/virtio
== Build drivers/net/vmxnet3
== Build drivers/net/kni
== Build drivers/net/softnic
CC sfc_intr.o
CC rte_pmd_ixgbe.o
CC ixgbe_tm.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
CC otx2_ptp.o
LD em_ethdev.o
CC em_rxtx.o
CC ixgbe_vf_representor.o
AR librte_pmd_hns3.a
CC sfc_ev.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_hns3.a
INSTALL-LIB librte_pmd_iavf.a
CC sfc_port.o
CC ice_flow.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
CC qede_rxtx.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
== Build drivers/net/vhost
== Build drivers/net/ifc
CC virtqueue.o
CC virtio_pci.o
CC sfc_rx.o
CC vmxnet3_rxtx.o
CC rte_eth_kni.o
CC sfc_tx.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC vmxnet3_ethdev.o
CC otx2_flow.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC ifcvf_vdpa.o
CC ifcvf.o
CC otx2_link.o
CC otx2_vlan.o
CC otx2_stats.o
CC sfc_tso.o
CC sfc_filter.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC sfc_flow.o
CC otx2_lookup.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC otx2_ethdev.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC sfc_dp.o
CC ice_dcb.o
CC ice_fdir.o
CC ice_ethdev.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC ice_rxtx.o
LD rte_eth_kni.o
LD rte_eth_softnic.o
CC ice_rxtx_vec_sse.o
CC sfc_ef10_rx.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC rte_eth_softnic_mempool.o
CC mps_tcam.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC qede_filter.o
CC i40e_vf_representor.o
CC i40e_rxtx_vec_avx2.o
CC ice_switch_filter.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC sfc_ef10_essb_rx.o
CC virtio_rxtx.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD rte_eth_tap.o
PMDINFO vmxnet3_ethdev.o.pmd.c
LD ifcvf_vdpa.o
CC vmxnet3_ethdev.o.pmd.o
CC virtio_ethdev.o
LD vmxnet3_ethdev.o
AR librte_pmd_ifc.a
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_ifc.a
INSTALL-LIB librte_pmd_tap.a
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC rte_eth_softnic_swq.o
LD i40e_ethdev.o
CC l2t.o
CC t4vf_hw.o
CC otx2_ethdev_devargs.o
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
CC efx_crc32.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC efx_ev.o
CC efx_evb.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC efx_filter.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC efx_hash.o
LD rte_eth_vhost.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC efx_intr.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC rte_eth_softnic_pipeline.o
CC rte_eth_softnic_thread.o
CC efx_phy.o
CC rte_eth_softnic_cli.o
CC virtio_rxtx_simple.o
CC efx_port.o
CC virtio_rxtx_simple_sse.o
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC efx_proxy.o
CC virtio_user/vhost_user.o
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
CC virtio_user_ethdev.o
CC parser.o
LD otx2_ethdev.o
CC efx_rx.o
CC efx_sram.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
CC efx_tunnel.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC conn.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
CC ef10_image.o
CC ef10_mac.o
LD virtio_ethdev.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC medford2_nic.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dsw_evdev.o
CC dsw_event.o
CC dpaa_eventdev.o
CC skeleton_eventdev.o
CC dsw_xstats.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC ssovf_worker.o
CC otx2_evdev_irq.o
CC ssovf_evdev.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC timvf_worker.o
CC sw_evdev_selftest.o
CC timvf_evdev.o
CC timvf_probe.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC opdl_test.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD dsw_evdev.o
LD opdl_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_octeontx_ssovf.a
PMDINFO dpaa2_eventdev.o.pmd.c
INSTALL-LIB librte_pmd_octeontx_ssovf.a
CC dpaa2_eventdev.o.pmd.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC dpaa2_qdma.o
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC ntb.o
CC skeleton_rawdev.o
CC ntb_hw_intel.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/pdump
== Build app/proc-info
== Build app/test-acl
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC main.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC main.o
CC cperf_ops.o
CC comp_perf_test_common.o
CC cperf_options_parsing.o
CC cperf_test_vectors.o
CC cperf_test_throughput.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
CC cperf_test_verify.o
CC cmdline_test.o
CC evt_main.o
CC commands.o
CC evt_options.o
CC evt_test.o
CC main.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
CC parser.o
CC test_bbdev.o
CC test_bbdev_perf.o
CC test_order_common.o
CC test_order_queue.o
CC test_order_atq.o
CC test_perf_common.o
CC main.o
CC config.o
CC test_perf_queue.o
CC test_bbdev_vector.o
CC init.o
CC testpmd.o
CC parameters.o
LD cmdline_test
CC runtime.o
CC commands.o
CC test.o
CC resource.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
LD testacl
CC test_resource.o
CC test_pipeline_atq.o
LD dpdk-procinfo
CC cmdline.o
CC pipeline_stub.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC pipeline_acl.o
CC test_prefetch.o
CC cmdline_flow.o
CC test_byteorder.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC config.o
CC iofwd.o
INSTALL-APP cmdline_test
CC test_per_lcore.o
LD dpdk-pdump
INSTALL-MAP cmdline_test.map
CC test_atomic.o
CC test_barrier.o
CC macfwd.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC csumonly.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC icmpecho.o
INSTALL-APP testacl
CC noisy_vnf.o
CC test_ticketlock.o
CC test_memory.o
INSTALL-MAP testacl.map
CC test_memzone.o
CC test_bitmap.o
CC bpf_cmd.o
CC util.o
LD testpipeline
CC softnicfwd.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
LD dpdk-test-eventdev
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
INSTALL-APP dpdk-test-eventdev
CC test_thash.o
INSTALL-MAP dpdk-test-eventdev.map
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
LD dpdk-test-crypto-perf
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testpmd
LD testbbdev
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 07:14:17 TestVxlan: Test Case test_vxlan_ipv4_detect Result PASSED:
17/10/2019 07:14:17 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:14:21 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:14:25 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 07:16:47 dts:
TEST SUITE : TestVxlan
17/10/2019 07:16:47 dts: NIC : fortville_eagle
17/10/2019 07:16:47 dut.10.240.176.196:
17/10/2019 07:16:47 tester:
17/10/2019 07:16:47 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 07:16:47 dut.10.240.176.196:
17/10/2019 07:16:47 tester:
17/10/2019 07:16:47 dut.10.240.176.196: cat config/common_base
17/10/2019 07:16:48 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 07:17:08 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 07:17:08 dut.10.240.176.196:
17/10/2019 07:17:08 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 07:19:09 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_vfio.o
CC eal_log.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_mcfg.o
CC eal_common_launch.o
CC eal_common_memory.o
CC eal_common_memalloc.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_meter.h
CC rte_cfgfile.o
CC rte_meter.o
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_stack.h
CC rte_metrics.o
CC rte_timer.o
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_pci.o
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_rcu_qsbr.o
CC rte_stack.o
CC rte_ring.o
CC rte_jobstats.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
CC rte_mempool.o
SYMLINK-FILE include/rte_thash.h
CC rte_mempool_ops.o
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_mempool_ops_default.o
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
CC ethdev_private.o
SYMLINK-FILE include/cmdline_parse_string.h
CC rte_ethdev.o
SYMLINK-FILE include/cmdline_rdline.h
CC rte_class_eth.o
SYMLINK-FILE include/cmdline_vt100.h
CC rte_flow.o
SYMLINK-FILE include/cmdline_socket.h
CC rte_tm.o
CC rte_mtr.o
SYMLINK-FILE include/cmdline_cirbuf.h
CC ethdev_profile.o
AR librte_reorder.a
SYMLINK-FILE include/cmdline_parse_portlist.h
CC cmdline.o
INSTALL-LIB librte_reorder.a
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
SYMLINK-FILE include/rte_member.h
CC rte_lpm6.o
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_vhost
== Build lib/librte_rawdev
== Build lib/librte_gro
== Build lib/librte_ip_frag
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_bitrate.o
CC fd_man.o
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_bpf_ethdev.h
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC iotlb.o
CC rte_distributor_v20.o
CC socket.o
CC rte_pdump.o
CC rte_distributor.o
CC vhost.o
CC rte_rawdev.o
CC bpf.o
SYMLINK-FILE include/rte_security.h
CC bpf_exec.o
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_kni.h
CC vhost_user.o
CC rte_distributor_match_sse.o
CC virtio_net.o
SYMLINK-FILE include/rte_gso.h
CC vdpa.o
CC rte_kni.o
SYMLINK-FILE include/rte_eventdev.h
CC bpf_load.o
SYMLINK-FILE include/rte_latencystats.h
CC rte_security.o
SYMLINK-FILE include/rte_gro.h
CC bpf_pkt.o
SYMLINK-FILE include/rte_ip_frag.h
CC rte_latencystats.o
CC rte_gso.o
CC gso_common.o
CC vhost_crypto.o
CC rte_gro.o
CC rte_ipv4_fragmentation.o
CC bpf_validate.o
CC bpf_jit_x86.o
CC rte_ipv6_fragmentation.o
CC gro_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd.h
CC rte_ipv4_reassembly.o
CC gso_tcp4.o
CC gso_tunnel_tcp4.o
CC rte_ipv6_reassembly.o
CC gso_udp4.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC rte_ip_frag_common.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_event_ring.h
CC ip_frag_internal.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_latencystats.a
INSTALL-LIB librte_gro.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC octeontx_mbox.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/vdev
== Build drivers/bus/pci
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vmbus_common.o
CC vdev_params.o
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC dpaa_bus.o
CC vmbus_common_uio.o
CC base/fman/fman.o
CC base/fman/netcfg_layer.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
SYMLINK-FILE include/rte_bus_pci.h
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC linux/pci_vfio.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
CC linux/pci.o
CC linux/pci_uio.o
CC pci_params.o
CC qbman/qbman_portal.o
CC pci_common_uio.o
CC pci_common.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/dpbp.o
CC mc/dpio.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
Building modules, stage 2.
AR librte_bus_vmbus.a
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_vmbus.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpci.o
LD portal/dpaa2_hw_dpbp.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
INSTALL-MODULE igb_uio.ko
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_bucket.o
CC dpaa_mempool.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC rte_mempool_stack.o
CC dpaa2_hw_mempool.o
CC rte_mempool_ring.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_dpaa.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/axgbe
== Build drivers/net/avp
== Build drivers/net/cxgbe
== Build drivers/net/atlantic
== Build drivers/net/bonding
== Build drivers/net/e1000
== Build drivers/net/dpaa
== Build drivers/net/ena
== Build drivers/net/dpaa2
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/null
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/baseband/fpga_lte_fec
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/ice
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
CC qat_comp.o
CC qat_comp_pmd.o
== Build drivers/net/liquidio
CC qat_device.o
== Build drivers/net/memif
== Build drivers/net/netvsc
== Build drivers/net/nfp
== Build drivers/net/bnxt
== Build drivers/net/null
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
== Build drivers/crypto/octeontx
== Build drivers/compress/octeontx
SYMLINK-FILE include/rte_avp_common.h
CC rte_eth_af_packet.o
CC bbdev_null.o
CC axgbe_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa.h
SYMLINK-FILE include/rte_eth_bond.h
CC failsafe.o
CC atl_rxtx.o
CC ark_ddm.o
SYMLINK-FILE include/rte_avp_fifo.h
CC bbdev_turbo_software.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC ena_ethdev.o
SYMLINK-FILE include/fpga_lte_fec.h
CC ipn3ke_ethdev.o
CC enetc_ethdev.o
CC iavf_adminq.o
CC cxgbe_ethdev.o
CC rte_eth_memif.o
CC hinic_pmd_api_cmd.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC dpaa_ethdev.o
CC hns3_ethdev.o
CC nfp_cppcore.o
CC hn_ethdev.o
CC enic_ethdev.o
CC fpga_lte_fec.o
CC avp_ethdev.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC base/dpaa2_hw_dpni.o
CC octeontx_rxtx.o
CC rte_eth_bond_api.o
CC otx_zip_pmd.o
CC rte_eth_null.o
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC bnxt_cpr.o
CC lio_ethdev.o
CC otx_cryptodev.o
SYMLINK-FILE include/rte_pmd_ice.h
CC otx2_rx.o
CC i40e_adminq.o
CC ice_controlq.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC ark_ethdev_rx.o
CC e1000_82540.o
CC ark_ethdev_tx.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD otx_cryptodev.o
CC e1000_82541.o
CC otx_cryptodev_capabilities.o
CC qat_common.o
CC octeontx_pkovf.o
CC bnxt_ethdev.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC dpaa2_rxtx.o
CC failsafe_args.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
CC hinic_pmd_cfg.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
LD octeontx_pkovf.o
LD axgbe_ethdev.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC octeontx_pkivf.o
LD bbdev_null.o
CC axgbe_dev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC axgbe_mdio.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD ipn3ke_ethdev.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
CC ipn3ke_representor.o
LD hn_ethdev.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD octeontx_pkivf.o
CC hn_rxtx.o
CC e1000_82542.o
LD enic_ethdev.o
CC octeontx_bgx.o
CC enic_main.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD otx_zip_pmd.o
CC nfp_cpp_pcie_ops.o
CC octeontx_ethdev.o
LD ark_ethdev.o
CC otx_zip.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC ark_mpu.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
CC rte_eth_bond_pmd.o
LD bbdev_turbo_software.o
LD enetc_ethdev.o
LD dpaa_ethdev.o
AR librte_pmd_bbdev_turbo_sw.a
CC enetc_rxtx.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC dpaa_rxtx.o
CC rte_eth_bond_args.o
CC qat_logs.o
CC e1000_82543.o
CC otx_cryptodev_hw_access.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC ark_pktchkr.o
CC qat_qp.o
PMDINFO lio_ethdev.o.pmd.c
CC memif_socket.o
CC lio_ethdev.o.pmd.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD lio_ethdev.o
LD fpga_lte_fec.o
CC lio_rxtx.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC ark_pktdir.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
CC hinic_pmd_cmdq.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_eqs.o
CC atl_ethdev.o
CC e1000_82571.o
CC hinic_pmd_hwdev.o
CC failsafe_eal.o
CC failsafe_ops.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC ixgbe_82598.o
AR librte_pmd_octeontx_zip.a
LD octeontx_ethdev.o
INSTALL-LIB librte_pmd_octeontx_zip.a
CC axgbe_phy_impl.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC axgbe_i2c.o
CC i40e_common.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
CC axgbe_rxtx.o
LD cxgbe_ethdev.o
CC axgbe_rxtx_vec_sse.o
CC cxgbevf_ethdev.o
CC otx_cryptodev_mbox.o
CC otx_cryptodev_ops.o
CC iavf_common.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC cxgbe_main.o
CC e1000_82575.o
AR librte_pmd_enetc.a
CC ark_pktgen.o
INSTALL-LIB librte_pmd_enetc.a
CC ipn3ke_tm.o
PMDINFO fm10k_ethdev.o.pmd.c
CC ixgbe_82599.o
CC fm10k_ethdev.o.pmd.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD fm10k_ethdev.o
LD rte_eth_null.o
CC ixgbe_x540.o
CC nfp_mutex.o
CC ixgbe_x550.o
CC fm10k_rxtx.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC fm10k_pf.o
CC nfp_resource.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
CC hns3_ethdev_vf.o
CC ice_common.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC hinic_pmd_hwif.o
CC nfp_crc.o
CC nfp_mip.o
CC nfp_nffw.o
CC ixgbe_phy.o
CC ipn3ke_flow.o
CC ixgbe_api.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC cxgbevf_main.o
CC sge.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC cxgbe_filter.o
CC ena_com.o
CC cxgbe_flow.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC ixgbe_vf.o
CC enic_rxtx.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC enic_clsf.o
CC e1000_i210.o
CC e1000_api.o
LD bnxt_ethdev.o
CC atl_hw_regs.o
CC bnxt_filter.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
CC hinic_pmd_wq.o
CC ark_rqp.o
CC iavf_ethdev.o
CC hw_atl_utils.o
CC nfp_hwinfo.o
CC ark_udm.o
CC nfp_rtsym.o
CC lio_23xx_vf.o
CC dpaa2_ethdev.o
CC dpaa2_flow.o
CC dpaa2_mux.o
CC e1000_ich8lan.o
CC e1000_logs.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC dpaa2_sparser.o
CC hw_atl_llh.o
CC mc/dpni.o
CC mc/dpkg.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC ixgbe_hv_vf.o
CC t4_hw.o
LD hns3_ethdev_vf.o
CC hns3_cmd.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC clip_tbl.o
CC hn_rndis.o
CC ena_eth_com.o
CC iavf_vchnl.o
CC ixgbe_dcb.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC ixgbe_dcb_82599.o
CC bnxt_flow.o
CC enic_res.o
CC enic_flow.o
CC base/vnic_cq.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC base/vnic_wq.o
CC hn_nvs.o
CC hn_vf.o
CC hinic_pmd_ethdev.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
CC hinic_pmd_rx.o
CC nfp_nsp.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC nfp_nsp_cmds.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC nfp_nsp_eth.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
CC hw_atl_utils_fw2x.o
AR librte_pmd_ena.a
LD rte_eth_bond_pmd.o
INSTALL-LIB librte_pmd_ena.a
CC nfp_net.o
CC lio_mbox.o
CC mc/dpdmux.o
CC rte_eth_bond_8023ad.o
CC rte_eth_bond_alb.o
CC rte_eth_bond_flow.o
CC ixgbe_dcb_82598.o
CC hns3_mbx.o
CC hns3_rxtx.o
CC hns3_rss.o
CC hinic_pmd_tx.o
CC hw_atl_b0.o
CC rte_pmd_atlantic.o
CC ice_sched.o
CC ice_switch.o
CC ixgbe_mbx.o
CC i40e_diag.o
CC i40e_hmc.o
CC fm10k_tlv.o
CC otx2_tx.o
CC otx2_tm.o
CC otx2_rss.o
CC otx2_mac.o
CC e1000_mac.o
CC e1000_manage.o
CC hns3_flow.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
LD dpaa2_ethdev.o
CC e1000_mbx.o
AR librte_pmd_dpaa2.a
CC ixgbe_rxtx.o
INSTALL-LIB librte_pmd_dpaa2.a
CC e1000_nvm.o
CC i40e_lan_hmc.o
CC ixgbe_ethdev.o
CC fm10k_common.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
== Build drivers/net/qede
== Build drivers/net/ring
== Build drivers/net/sfc
== Build drivers/net/tap
== Build drivers/net/thunderx
CC fm10k_mbx.o
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC hns3_fdir.o
LD hinic_pmd_ethdev.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC hns3_intr.o
CC bnxt_hwrm.o
== Build drivers/net/vmxnet3
== Build drivers/net/kni
CC bnxt_ring.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC otx2_ptp.o
CC otx2_flow.o
CC ecore_dev.o
CC e1000_osdep.o
CC nicvf_rxtx.o
CC sfc_ethdev.o
CC vdev_netvsc.o
CC virtqueue.o
CC e1000_phy.o
CC base/vnic_dev.o
CC rte_eth_tap.o
CC tap_flow.o
CC bnxt_rxq.o
CC rte_eth_kni.o
CC vmxnet3_rxtx.o
== Build drivers/net/softnic
CC fm10k_vf.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
CC iavf_rxtx.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC sfc_kvargs.o
CC sfc.o
CC fm10k_api.o
CC i40e_nvm.o
CC fm10k_rxtx_vec.o
CC i40e_dcb.o
CC i40e_ethdev.o
CC iavf_rxtx_vec_sse.o
CC sfc_mcdi.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
CC hns3_stats.o
CC hns3_regs.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
== Build drivers/net/vhost
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
LD rte_eth_kni.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC bnxt_rxr.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
LD nfp_net.o
CC i40e_rxtx.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC mps_tcam.o
== Build drivers/net/ifc
CC e1000_vf.o
SYMLINK-FILE include/rte_eth_vhost.h
AR librte_pmd_bond.a
CC rte_eth_vhost.o
INSTALL-LIB librte_pmd_bond.a
CC vmxnet3_ethdev.o
CC bnxt_stats.o
CC bnxt_txq.o
CC virtio_pci.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC igb_ethdev.o
CC ifcvf_vdpa.o
CC ifcvf.o
CC rte_eth_softnic_mempool.o
CC sfc_intr.o
CC sfc_ev.o
CC sfc_port.o
CC i40e_ethdev_vf.o
CC sfc_rx.o
CC sfc_tx.o
CC hns3_dcb.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC nicvf_hw.o
CC nicvf_mbox.o
CC l2t.o
CC virtio_rxtx.o
CC rte_eth_softnic_swq.o
CC rte_eth_softnic_link.o
CC bnxt_txr.o
CC bnxt_vnic.o
CC t4vf_hw.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
CC base/vnic_intr.o
AR librte_pmd_ifc.a
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_ifc.a
CC virtio_ethdev.o
LD vmxnet3_ethdev.o
CC virtio_rxtx_simple.o
CC virtio_rxtx_simple_sse.o
AR librte_pmd_hinic.a
CC virtio_user/vhost_user.o
CC base/vnic_rq.o
INSTALL-LIB librte_pmd_hinic.a
CC otx2_link.o
CC otx2_vlan.o
CC nicvf_ethdev.o
CC enic_rxtx_vec_avx2.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
LD rte_eth_vhost.o
CC rte_eth_softnic_tm.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
CC otx2_stats.o
CC otx2_lookup.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC sfc_tso.o
CC sfc_filter.o
CC failsafe_rxtx.o
CC virtio_user/vhost_kernel.o
CC bnxt_irq.o
CC bnxt_util.o
CC hns3_mp.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC otx2_ethdev.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC rte_eth_softnic_pipeline.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC i40e_pf.o
CC rte_eth_softnic_thread.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC rte_eth_softnic_cli.o
CC i40e_fdir.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
AR librte_pmd_iavf.a
CC i40e_flow.o
INSTALL-LIB librte_pmd_iavf.a
CC rte_pmd_i40e.o
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC virtio_user_ethdev.o
CC failsafe_ether.o
CC ice_nvm.o
CC ice_flex_pipe.o
== Build drivers/crypto/scheduler
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC igb_rxtx.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC ecore_hw.o
CC otx2_flow_utils.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
CC otx2_ethdev_irq.o
CC nicvf_bsvf.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC scheduler_pmd.o
CC sfc_flow.o
CC sfc_dp.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
CC nicvf_svf.o
CC tap_netlink.o
CC ecore_cxt.o
CC ecore_l2.o
CC ixgbe_fdir.o
CC ecore_sp_commands.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC ecore_init_fw_funcs.o
CC parser.o
CC tap_tcmsgs.o
CC tap_bpf_api.o
CC tap_intr.o
CC i40e_tm.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
CC otx2_ethdev_ops.o
CC ecore_spq.o
CC otx2_ethdev_debug.o
CC ixgbe_pf.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC otx2_ethdev_devargs.o
CC failsafe_flow.o
CC failsafe_intr.o
CC i40e_vf_representor.o
CC ixgbe_flow.o
CC scheduler_pmd_ops.o
CC rte_cryptodev_scheduler.o
CC sfc_ef10_rx.o
CC ixgbe_rxtx_vec_sse.o
CC scheduler_roundrobin.o
CC ixgbe_ipsec.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC rte_pmd_ixgbe.o
CC scheduler_pkt_size_distr.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
CC scheduler_failover.o
CC ecore_init_ops.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC ecore_mcp.o
CC ecore_int.o
CC conn.o
CC ecore_dcbx.o
CC bcm_osal.o
CC ecore_sriov.o
CC ecore_vf.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
CC ixgbe_tm.o
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
CC qede_ethdev.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
CC scheduler_multicore.o
CC sfc_ef10_essb_rx.o
CC igb_pf.o
CC ixgbe_vf_representor.o
CC dpaa_sec.o
CC null_crypto_pmd.o
CC dpaa2_sec_dpseci.o
CC ice_flow.o
CC caam_jr.o
AR librte_pmd_bnxt.a
CC caam_jr_capabilities.o
INSTALL-LIB librte_pmd_bnxt.a
CC caam_jr_hw.o
CC caam_jr_uio.o
CC virtqueue.o
CC virtio_pci.o
CC virtio_rxtx.o
CC nitrox_device.o
CC nitrox_hal.o
CC nitrox_logs.o
CC nitrox_sym.o
CC nitrox_sym_capabilities.o
CC null_crypto_pmd_ops.o
CC nitrox_sym_reqmgr.o
CC nitrox_qp.o
AR librte_pmd_softnic.a
CC sfc_ef10_tx.o
CC mc/dpseci.o
INSTALL-LIB librte_pmd_softnic.a
CC efx_bootcfg.o
CC efx_crc32.o
CC efx_ev.o
CC efx_evb.o
CC efx_filter.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
CC efx_hash.o
LD nitrox_device.o
CC efx_intr.o
CC igb_flow.o
CC efx_lic.o
CC virtio_cryptodev.o
CC efx_mac.o
CC em_ethdev.o
CC em_rxtx.o
CC ice_dcb.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
CC ice_fdir.o
CC ice_ethdev.o
CC efx_mcdi.o
CC efx_mon.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC efx_nic.o
CC efx_nvram.o
CC qede_main.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
CC ice_rxtx.o
INSTALL-LIB librte_pmd_i40e.a
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC qede_rxtx.o
CC qede_filter.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC ice_rxtx_vec_avx2.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC ice_generic_flow.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
CC siena_mcdi.o
LD em_ethdev.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
AR librte_pmd_virtio.a
AR librte_pmd_ixgbe.a
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_ixgbe.a
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
LD ice_ethdev.o
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/octeontx
== Build drivers/event/dsw
== Build drivers/event/octeontx2
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dpaa_eventdev.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC skeleton_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC opdl_ring.o
CC opdl_evdev.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC opdl_evdev_init.o
CC ssovf_worker.o
CC otx2_evdev_adptr.o
CC opdl_evdev_xstats.o
CC ssovf_evdev.o
CC opdl_test.o
CC otx2_tim_evdev.o
CC sw_evdev.o
CC otx2_evdev_selftest.o
CC sw_evdev_worker.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC otx2_evdev_irq.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC timvf_worker.o
CC sw_evdev_selftest.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO dpaa_sec.o.pmd.c
PMDINFO ssovf_evdev.o.pmd.c
CC dpaa_sec.o.pmd.o
CC ssovf_evdev.o.pmd.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD dpaa_sec.o
LD sw_evdev.o
LD ssovf_evdev.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_octeontx_ssovf.a
PMDINFO dpaa2_eventdev.o.pmd.c
INSTALL-LIB librte_pmd_octeontx_ssovf.a
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC skeleton_rawdev.o
CC dpaa2_qdma.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC ntb.o
CC ntb_hw_intel.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/pdump
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-crypto-perf
== Build app/test-compress-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC comp_perf_test_verify.o
CC testpmd.o
CC comp_perf_test_benchmark.o
CC comp_perf_test_common.o
CC main.o
CC parameters.o
CC cmdline.o
CC cmdline_test.o
CC commands.o
CC cmdline_flow.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC config.o
CC iofwd.o
CC macfwd.o
CC macswap.o
CC flowgen.o
CC evt_main.o
CC rxonly.o
CC evt_options.o
CC main.o
CC evt_test.o
CC txonly.o
CC config.o
CC parser.o
CC test_order_common.o
CC csumonly.o
CC icmpecho.o
CC main.o
CC init.o
CC test_bbdev.o
CC test_bbdev_perf.o
CC main.o
CC cperf_ops.o
LD cmdline_test
CC test_order_queue.o
CC commands.o
CC test.o
CC noisy_vnf.o
CC resource.o
CC runtime.o
LD testacl
CC pipeline_stub.o
CC test_order_atq.o
CC bpf_cmd.o
LD dpdk-procinfo
CC test_bbdev_vector.o
CC test_perf_common.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_resource.o
CC test_perf_queue.o
CC test_perf_atq.o
CC test_prefetch.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
LD dpdk-pdump
CC test_pipeline_common.o
CC test_barrier.o
CC test_malloc.o
CC cperf_options_parsing.o
CC cperf_test_vectors.o
CC util.o
CC softnicfwd.o
CC cperf_test_throughput.o
CC cperf_test_latency.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC test_pipeline_queue.o
CC test_memzone.o
CC test_pipeline_atq.o
CC pipeline_lpm_ipv6.o
INSTALL-APP testacl
CC test_bitmap.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP testacl.map
INSTALL-MAP dpdk-procinfo.map
CC test_reciprocal_division.o
CC cperf_test_pmd_cyclecount.o
CC cperf_test_verify.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC pipeline_acl.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
LD dpdk-test-eventdev
LD testpipeline
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
INSTALL-APP testpipeline
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
INSTALL-MAP testpipeline.map
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
LD dpdk-test-crypto-perf
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
LD testpmd
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 07:19:09 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:19:21 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:19:21 dut.10.240.176.196: set fwd rxonly
17/10/2019 07:19:21 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 07:19:21 dut.10.240.176.196: set verbose 1
17/10/2019 07:19:21 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 07:19:21 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:19:21 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:19:26 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:19:27 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:19:32 TestVxlan: send vxlan pkts [outer_udp_dst = 1234]
17/10/2019 07:19:32 dut.10.240.176.196: start
17/10/2019 07:19:32 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:19:32 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267972.25 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:33 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267972.25 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:35 tester: python /tmp/tester/scapy_ens160f0.cmd1571267972.25
17/10/2019 07:19:35 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63338, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:19:37 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:19:37 TestVxlan: send vxlan pkts [inner_l4_type = UDP]
17/10/2019 07:19:37 dut.10.240.176.196: start
17/10/2019 07:19:37 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:19:37 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267977.97 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:39 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267977.97 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:40 tester: python /tmp/tester/scapy_ens160f0.cmd1571267977.97
17/10/2019 07:19:41 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:19:43 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:19:43 TestVxlan: send vxlan pkts [inner_l4_type = TCP]
17/10/2019 07:19:43 dut.10.240.176.196: start
17/10/2019 07:19:43 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:19:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267983.57 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:44 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267983.57 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:46 tester: python /tmp/tester/scapy_ens160f0.cmd1571267983.57
17/10/2019 07:19:47 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=40309)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:19:49 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:19:49 TestVxlan: send vxlan pkts [inner_l4_type = SCTP]
17/10/2019 07:19:49 dut.10.240.176.196: start
17/10/2019 07:19:49 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:19:49 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267989.15 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:50 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267989.15 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:51 tester: python /tmp/tester/scapy_ens160f0.cmd1571267989.15
17/10/2019 07:19:52 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=4564)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 07:19:54 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=128 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:19:54 TestVxlan: send vxlan pkts [outer_vlan = 1]
17/10/2019 07:19:54 dut.10.240.176.196: start
17/10/2019 07:19:54 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:19:54 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571267994.74 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571267994.74 root@10.240.176.173:/tmp/tester/
17/10/2019 07:19:57 tester: python /tmp/tester/scapy_ens160f0.cmd1571267994.74
17/10/2019 07:19:58 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:20:00 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:20:00 TestVxlan: send vxlan pkts [outer_vlan = 1][inner_vlan = 1]
17/10/2019 07:20:00 dut.10.240.176.196: start
17/10/2019 07:20:00 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:20:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268000.33 root@10.240.176.173:/tmp/tester/
17/10/2019 07:20:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268000.33 root@10.240.176.173:/tmp/tester/
17/10/2019 07:20:03 tester: python /tmp/tester/scapy_ens160f0.cmd1571268000.33
17/10/2019 07:20:03 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:20:05 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=118 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:20:05 dut.10.240.176.196: stop
17/10/2019 07:20:05 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 6 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:20:05 dut.10.240.176.196: quit
17/10/2019 07:20:09 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:20:09 dut.10.240.176.196: cat config/common_base
17/10/2019 07:20:09 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 07:20:09 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 07:20:09 dut.10.240.176.196:
17/10/2019 07:20:09 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 07:20:09 dut.10.240.176.196:
17/10/2019 07:20:09 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 07:20:09 dut.10.240.176.196:
17/10/2019 07:20:09 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 07:20:10 dut.10.240.176.196:
17/10/2019 07:20:10 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 07:20:10 dut.10.240.176.196:
17/10/2019 07:20:10 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 07:20:10 dut.10.240.176.196:
17/10/2019 07:20:10 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 07:20:10 dut.10.240.176.196:
17/10/2019 07:20:10 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 07:22:13 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_cfgfile
== Build lib/librte_timer
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
CC rte_metrics.o
CC rte_cfgfile.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_ring.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_meter.h
CC rte_meter.o
SYMLINK-FILE include/rte_timer.h
CC rte_timer.o
SYMLINK-FILE include/rte_pci.h
CC rte_pci.o
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_stack.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
AR librte_pci.a
INSTALL-LIB librte_ring.a
INSTALL-LIB librte_pci.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
SYMLINK-FILE include/rte_mempool.h
CC rte_cuckoo_hash.o
CC rte_mempool.o
CC rte_fbk_hash.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_lpm
== Build lib/librte_efd
== Build lib/librte_member
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC ethdev_private.o
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC cmdline.o
CC rte_tm.o
CC cmdline_cirbuf.o
CC rte_mtr.o
CC ethdev_profile.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm_sse.h
SYMLINK-FILE include/rte_lpm6.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_kni.h
CC rte_kni.o
SYMLINK-FILE include/rte_bitrate.h
CC rte_bitrate.o
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_gso.h
CC rte_latencystats.o
CC rte_gso.o
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_pdump.h
CC gso_common.o
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_security.h
CC rte_pdump.o
SYMLINK-FILE include/rte_security_driver.h
CC gso_tunnel_tcp4.o
CC rte_rawdev.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_event_ring.h
CC gso_udp4.o
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_bpf_ethdev.h
SYMLINK-FILE include/rte_distributor.h
CC fd_man.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_ip_frag.h
CC rte_security.o
CC iotlb.o
CC socket.o
CC rte_distributor_v20.o
CC rte_ipv4_fragmentation.o
CC rte_gro.o
CC rte_distributor.o
SYMLINK-FILE include/rte_event_timer_adapter.h
CC rte_ipv6_fragmentation.o
CC gro_tcp4.o
CC bpf.o
CC vhost.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC gro_vxlan_tcp4.o
CC rte_distributor_match_sse.o
CC bpf_exec.o
CC vhost_user.o
CC rte_ipv4_reassembly.o
CC rte_ipv6_reassembly.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC bpf_load.o
CC virtio_net.o
CC rte_ip_frag_common.o
CC bpf_pkt.o
CC vdpa.o
CC ip_frag_internal.o
CC vhost_crypto.o
CC bpf_validate.o
CC rte_eventdev.o
CC bpf_jit_x86.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_gro.a
INSTALL-LIB librte_gro.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
AR librte_gso.a
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
INSTALL-LIB librte_gso.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC octeontx_mbox.o
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
Building modules, stage 2.
SYMLINK-FILE include/rte_bus_pci.h
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/dpbp.o
CC mc/dpio.o
CC linux/pci.o
CC mc/mc_sys.o
CC pci_params.o
CC pci_common.o
CC linux/pci_uio.o
CC mc/dpcon.o
CC linux/pci_vfio.o
CC mc/dpci.o
CC pci_common_uio.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
SYMLINK-FILE include/rte_bus_vdev.h
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_bus_ifpga.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC vdev.o
CC vdev_params.o
CC ifpga_bus.o
CC ifpga_common.o
CC linux/vmbus_bus.o
CC vmbus_common.o
CC linux/vmbus_uio.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC dpaa_bus.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC base/fman/netcfg_layer.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
MODPOST 1 modules
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
LD portal/dpaa2_hw_dpci.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
MODPOST 1 modules
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/stack
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC rte_mempool_bucket.o
CC rte_mempool_stack.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa_mempool.o
CC dpaa2_hw_mempool.o
CC rte_mempool_ring.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/crypto/octeontx
== Build drivers/net/af_packet
== Build drivers/crypto/null
== Build drivers/crypto/scheduler
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/virtio
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/crypto/nitrox
== Build drivers/net/dpaa2
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/net/enetc
== Build drivers/net/enic
CC qat_comp.o
== Build drivers/net/failsafe
CC qat_comp_pmd.o
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/compress/octeontx
CC qat_device.o
CC qat_common.o
== Build drivers/net/ipn3ke
CC qat_logs.o
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/null
== Build drivers/baseband/fpga_lte_fec
== Build drivers/net/ixgbe
SYMLINK-FILE include/rte_eth_bond.h
CC ark_ddm.o
CC enetc_ethdev.o
CC caam_jr.o
SYMLINK-FILE include/rte_pmd_dpaa.h
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC rte_eth_af_packet.o
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_avp_common.h
CC bbdev_turbo_software.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC iavf_adminq.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC axgbe_ethdev.o
SYMLINK-FILE include/fpga_lte_fec.h
CC dpaa_ethdev.o
CC bbdev_null.o
CC dpaa_sec.o
CC ena_ethdev.o
CC otx_zip_pmd.o
CC base/dpaa2_hw_dpni.o
CC hinic_pmd_api_cmd.o
SYMLINK-FILE include/rte_avp_fifo.h
CC ipn3ke_ethdev.o
CC nitrox_device.o
CC atl_rxtx.o
CC failsafe.o
CC virtqueue.o
CC rte_eth_bond_api.o
CC cxgbe_ethdev.o
CC otx_cryptodev.o
CC fpga_lte_fec.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC dpaa2_sec_dpseci.o
CC scheduler_pmd.o
CC enic_ethdev.o
CC avp_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC hns3_ethdev.o
CC fm10k_ethdev.o
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ice.h
CC e1000_80003es2lan.o
CC ice_controlq.o
CC ark_ethdev.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC ixgbe_82598.o
CC ark_ethdev_rx.o
CC iavf_common.o
CC e1000_82540.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD nitrox_device.o
LD otx_cryptodev.o
CC e1000_82541.o
CC nitrox_hal.o
CC otx_cryptodev_capabilities.o
CC qat_qp.o
CC scheduler_pmd_ops.o
CC nitrox_logs.o
CC dpaa2_rxtx.o
CC dpaa2_ethdev.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC hinic_pmd_cfg.o
LD failsafe.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC failsafe_args.o
LD bbdev_null.o
CC nitrox_sym.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
CC nitrox_sym_capabilities.o
LD axgbe_ethdev.o
CC virtio_pci.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
CC axgbe_dev.o
LD ipn3ke_ethdev.o
CC ipn3ke_representor.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC e1000_82542.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD ark_ethdev.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
LD otx_zip_pmd.o
LD enic_ethdev.o
CC e1000_82543.o
CC rte_eth_bond_pmd.o
CC enic_main.o
CC otx_zip.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD bbdev_turbo_software.o
LD dpaa_ethdev.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC enic_rxtx.o
CC dpaa_rxtx.o
LD enetc_ethdev.o
CC enic_clsf.o
CC enetc_rxtx.o
CC otx_cryptodev_hw_access.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD fpga_lte_fec.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC otx_cryptodev_mbox.o
CC hinic_pmd_cmdq.o
CC hinic_pmd_eqs.o
CC rte_cryptodev_scheduler.o
CC scheduler_roundrobin.o
CC e1000_82571.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
AR librte_pmd_qat.a
CC enic_res.o
INSTALL-LIB librte_pmd_qat.a
CC atl_ethdev.o
CC enic_flow.o
CC virtio_rxtx.o
CC failsafe_eal.o
AR librte_pmd_octeontx_zip.a
CC ark_ethdev_tx.o
INSTALL-LIB librte_pmd_octeontx_zip.a
CC ipn3ke_tm.o
CC ixgbe_82599.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC nitrox_sym_reqmgr.o
CC cxgbevf_ethdev.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC cxgbe_main.o
CC cxgbevf_main.o
CC otx_cryptodev_ops.o
CC e1000_82575.o
CC iavf_ethdev.o
CC base/vnic_cq.o
CC axgbe_mdio.o
CC hinic_pmd_hwdev.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC hinic_pmd_hwif.o
LD dpaa2_ethdev.o
CC hinic_pmd_mgmt.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC scheduler_pkt_size_distr.o
LD fm10k_ethdev.o
CC dpaa2_flow.o
CC fm10k_rxtx.o
CC i40e_common.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
CC i40e_diag.o
CC failsafe_ops.o
CC hns3_ethdev_vf.o
CC ice_common.o
CC ipn3ke_flow.o
CC ixgbe_x540.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC nitrox_qp.o
CC fm10k_pf.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
CC ixgbe_x550.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC ena_com.o
CC base/vnic_wq.o
CC hinic_pmd_wq.o
PMDINFO atl_ethdev.o.pmd.c
CC ark_mpu.o
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC e1000_i210.o
CC ixgbe_phy.o
CC virtio_cryptodev.o
CC e1000_api.o
== Build drivers/net/liquidio
CC atl_hw_regs.o
CC caam_jr_capabilities.o
CC axgbe_phy_impl.o
CC ark_pktchkr.o
CC caam_jr_hw.o
CC hw_atl_utils.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC hw_atl_llh.o
CC caam_jr_uio.o
CC lio_ethdev.o
CC sge.o
CC i40e_hmc.o
CC cxgbe_filter.o
CC e1000_ich8lan.o
CC e1000_logs.o
CC scheduler_failover.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC hinic_pmd_ethdev.o
CC scheduler_multicore.o
LD hns3_ethdev_vf.o
CC e1000_mac.o
CC hns3_cmd.o
CC e1000_manage.o
CC e1000_mbx.o
CC ena_eth_com.o
CC e1000_nvm.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC base/vnic_dev.o
CC base/vnic_intr.o
CC mc/dpseci.o
CC ixgbe_api.o
CC ixgbe_vf.o
CC e1000_osdep.o
CC dpaa2_mux.o
CC dpaa2_sparser.o
CC cxgbe_flow.o
CC ark_pktdir.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC axgbe_i2c.o
CC axgbe_rxtx.o
CC axgbe_rxtx_vec_sse.o
AR librte_pmd_ena.a
CC e1000_phy.o
INSTALL-LIB librte_pmd_ena.a
CC i40e_lan_hmc.o
== Build drivers/net/memif
== Build drivers/net/netvsc
CC lio_rxtx.o
CC hw_atl_utils_fw2x.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC lio_23xx_vf.o
CC lio_mbox.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
== Build drivers/net/nfp
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD virtio_cryptodev.o
== Build drivers/net/bnxt
LD rte_eth_bond_pmd.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC ixgbe_hv_vf.o
CC rte_eth_bond_args.o
== Build drivers/net/null
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
CC hns3_mbx.o
LD caam_jr.o
CC base/vnic_rq.o
CC rte_eth_memif.o
CC fm10k_tlv.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC fm10k_common.o
CC hn_ethdev.o
CC ixgbe_dcb.o
CC nfp_cppcore.o
CC ark_pktgen.o
SYMLINK-FILE include/rte_pmd_bnxt.h
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC bnxt_cpr.o
LD iavf_ethdev.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
CC bnxt_ethdev.o
CC iavf_vchnl.o
CC iavf_rxtx.o
LD lio_ethdev.o
PMDINFO dpaa2_mux.o.pmd.c
CC rte_eth_null.o
CC dpaa2_mux.o.pmd.o
CC iavf_rxtx_vec_sse.o
CC bnxt_filter.o
LD dpaa2_mux.o
CC bnxt_flow.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC mc/dpni.o
CC fm10k_mbx.o
LD hinic_pmd_ethdev.o
CC hinic_pmd_rx.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC mc/dpkg.o
CC mc/dpdmux.o
CC hinic_pmd_tx.o
CC bnxt_hwrm.o
CC ice_sched.o
CC e1000_vf.o
CC hn_rxtx.o
CC rte_eth_bond_8023ad.o
CC rte_eth_bond_alb.o
CC rte_eth_bond_flow.o
CC bnxt_ring.o
CC ice_switch.o
CC hw_atl_b0.o
CC ice_nvm.o
CC hns3_rxtx.o
CC ixgbe_dcb_82599.o
CC i40e_nvm.o
CC fm10k_vf.o
CC igb_ethdev.o
CC rte_pmd_atlantic.o
CC ice_flex_pipe.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
CC ice_flow.o
LD hn_ethdev.o
CC fm10k_api.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC hn_rndis.o
CC ark_rqp.o
CC t4_hw.o
CC ixgbe_dcb_82598.o
CC nfp_cpp_pcie_ops.o
CC fm10k_rxtx_vec.o
CC ark_udm.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC nfp_mutex.o
CC failsafe_rxtx.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
AR librte_pmd_ark.a
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_ark.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC i40e_dcb.o
CC failsafe_ether.o
CC bnxt_rxq.o
CC ixgbe_mbx.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC bnxt_rxr.o
CC ice_dcb.o
CC igb_rxtx.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC enic_rxtx_vec_avx2.o
CC memif_socket.o
CC igb_pf.o
CC bnxt_stats.o
CC ixgbe_rxtx.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC ixgbe_ethdev.o
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC ixgbe_fdir.o
CC ixgbe_pf.o
CC nfp_resource.o
CC nfp_crc.o
CC nfp_mip.o
CC nfp_nffw.o
CC i40e_ethdev.o
CC nfp_hwinfo.o
CC failsafe_flow.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
CC hns3_rss.o
CC bnxt_txq.o
CC hns3_flow.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC failsafe_intr.o
CC bnxt_txr.o
CC ice_fdir.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC ice_ethdev.o
LD bnxt_ethdev.o
CC ice_rxtx.o
AR librte_pmd_memif.a
CC i40e_rxtx.o
CC ice_rxtx_vec_sse.o
CC nfp_rtsym.o
CC igb_flow.o
INSTALL-LIB librte_pmd_memif.a
CC em_ethdev.o
CC ixgbe_flow.o
AR librte_pmd_iavf.a
CC em_rxtx.o
CC i40e_rxtx_vec_sse.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_iavf.a
INSTALL-LIB librte_pmd_enic.a
CC i40e_ethdev_vf.o
CC i40e_pf.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC i40e_fdir.o
LD igb_ethdev.o
CC i40e_flow.o
CC ixgbe_rxtx_vec_sse.o
AR librte_pmd_fm10k.a
CC ixgbe_ipsec.o
CC rte_pmd_i40e.o
INSTALL-LIB librte_pmd_fm10k.a
CC rte_pmd_ixgbe.o
CC hn_nvs.o
CC ixgbe_tm.o
CC nfp_nsp.o
CC bnxt_vnic.o
AR librte_pmd_hinic.a
CC hns3_fdir.o
INSTALL-LIB librte_pmd_hinic.a
CC hns3_intr.o
CC hns3_stats.o
CC clip_tbl.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC mps_tcam.o
CC bnxt_irq.o
CC bnxt_util.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC rte_pmd_bnxt.o
CC hn_vf.o
CC nfp_nsp_cmds.o
CC nfp_nsp_eth.o
CC nfp_net.o
CC i40e_tm.o
CC i40e_vf_representor.o
CC ixgbe_vf_representor.o
CC i40e_rxtx_vec_avx2.o
CC bnxt_rxtx_vec_sse.o
CC ice_switch_filter.o
CC l2t.o
CC t4vf_hw.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC hns3_regs.o
CC hns3_dcb.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC hns3_mp.o
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
== Build drivers/net/qede
== Build drivers/net/ring
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
== Build drivers/net/sfc
== Build drivers/net/tap
AR librte_pmd_netvsc.a
== Build drivers/net/thunderx
INSTALL-LIB librte_pmd_netvsc.a
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
== Build drivers/net/vmxnet3
== Build drivers/net/kni
CC octeontx_rxtx.o
== Build drivers/net/softnic
CC otx2_rx.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC ecore_dev.o
CC ecore_hw.o
== Build drivers/net/vhost
CC ecore_cxt.o
CC nicvf_rxtx.o
CC virtqueue.o
CC sfc_ethdev.o
CC vdev_netvsc.o
CC nicvf_hw.o
CC vmxnet3_rxtx.o
CC rte_eth_kni.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
LD ixgbe_ethdev.o
CC rte_eth_softnic_mempool.o
== Build drivers/net/ifc
CC rte_eth_tap.o
CC rte_eth_softnic_swq.o
SYMLINK-FILE include/rte_eth_vhost.h
CC octeontx_pkovf.o
CC rte_eth_vhost.o
CC octeontx_pkivf.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC octeontx_bgx.o
CC octeontx_ethdev.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC ifcvf_vdpa.o
PMDINFO octeontx_pkovf.o.pmd.c
LD octeontx_pkivf.o
CC octeontx_pkovf.o.pmd.o
CC ifcvf.o
LD octeontx_pkovf.o
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
CC tap_flow.o
CC tap_netlink.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC sfc_kvargs.o
LD ice_ethdev.o
CC ecore_l2.o
CC ecore_sp_commands.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC nicvf_mbox.o
CC rte_eth_softnic_tap.o
CC sfc.o
CC sfc_mcdi.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
AR librte_pmd_ixgbe.a
PMDINFO rte_eth_kni.o.pmd.c
LD rte_eth_ring.o
CC rte_eth_kni.o.pmd.o
INSTALL-LIB librte_pmd_ixgbe.a
CC vmxnet3_ethdev.o
CC ecore_init_ops.o
LD rte_eth_kni.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC ecore_mcp.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC ecore_int.o
CC virtio_pci.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC rte_eth_softnic_action.o
LD nfp_net.o
AR librte_pmd_nfp.a
CC rte_eth_softnic_pipeline.o
INSTALL-LIB librte_pmd_nfp.a
CC rte_eth_softnic_thread.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD vdev_netvsc.o
LD octeontx_ethdev.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC rte_eth_softnic_cli.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC rte_eth_softnic_flow.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC rte_eth_softnic_meter.o
CC tap_tcmsgs.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC tap_bpf_api.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC conn.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
CC nicvf_ethdev.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC nicvf_bsvf.o
CC sfc_intr.o
CC sfc_ev.o
CC ecore_dcbx.o
CC sfc_port.o
CC sfc_rx.o
CC sfc_tx.o
CC sfc_tso.o
CC virtio_rxtx.o
CC virtio_ethdev.o
CC virtio_rxtx_simple.o
CC tap_intr.o
CC virtio_rxtx_simple_sse.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC virtio_user/vhost_user.o
LD rte_eth_vhost.o
CC nicvf_svf.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC bcm_osal.o
CC ecore_sriov.o
CC ecore_vf.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD vmxnet3_ethdev.o
LD sfc_ethdev.o
CC qede_ethdev.o
CC sfc_filter.o
CC virtio_user/vhost_kernel.o
CC qede_main.o
CC qede_rxtx.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC qede_filter.o
CC virtio_user_ethdev.o
CC sfc_flow.o
CC otx2_tx.o
CC sfc_dp.o
CC sfc_ef10_rx.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
CC otx2_tm.o
CC otx2_rss.o
CC otx2_mac.o
CC otx2_ptp.o
CC otx2_flow.o
CC otx2_link.o
CC efx_bootcfg.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
CC efx_crc32.o
CC efx_ev.o
CC otx2_vlan.o
CC efx_evb.o
CC otx2_stats.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC otx2_lookup.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD nicvf_ethdev.o
LD i40e_ethdev.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC otx2_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC efx_filter.o
CC efx_hash.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
CC efx_intr.o
CC otx2_flow_utils.o
CC efx_lic.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC efx_mac.o
CC efx_mcdi.o
CC otx2_ethdev_devargs.o
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC efx_port.o
CC efx_proxy.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
CC efx_rx.o
LD qede_ethdev.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC ef10_mac.o
CC ef10_mcdi.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa2
== Build drivers/event/dpaa
== Build drivers/event/opdl
CC skeleton_eventdev.o
CC dpaa_eventdev.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC opdl_ring.o
CC sw_evdev_xstats.o
CC opdl_evdev.o
CC sw_evdev_selftest.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC opdl_test.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC otx2_dpi_rawdev.o
CC ioat_rawdev_test.o
CC otx2_dpi_msg.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
CC otx2_dpi_test.o
CC dpaa2_qdma.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC ntb.o
CC ntb_hw_intel.o
CC dpaa2_cmdif.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
AR librte_rawdev_ifpga.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
INSTALL-LIB librte_rawdev_ifpga.a
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD dpaa2_qdma.o
LD ntb.o
AR librte_rawdev_dpaa2_qdma.a
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/pdump
== Build app/test-acl
== Build app/proc-info
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC cmdline_test.o
CC commands.o
CC main.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC comp_perf_test_common.o
CC main.o
CC test_bbdev.o
CC main.o
CC cperf_ops.o
CC main.o
CC test_bbdev_perf.o
CC config.o
CC test_bbdev_vector.o
CC cperf_options_parsing.o
CC evt_main.o
CC evt_options.o
CC testpmd.o
CC parameters.o
CC init.o
CC evt_test.o
CC runtime.o
CC parser.o
CC cmdline.o
CC pipeline_stub.o
CC cperf_test_vectors.o
CC pipeline_hash.o
CC test_order_common.o
CC cperf_test_throughput.o
CC pipeline_lpm.o
CC cmdline_flow.o
CC test_order_queue.o
CC cmdline_mtr.o
CC cmdline_tm.o
LD cmdline_test
CC config.o
CC commands.o
CC test.o
CC test_order_atq.o
CC resource.o
CC test_resource.o
LD testacl
CC pipeline_lpm_ipv6.o
CC test_prefetch.o
CC pipeline_acl.o
CC cperf_test_latency.o
LD dpdk-procinfo
CC cperf_test_pmd_cyclecount.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_perf_common.o
CC test_perf_queue.o
CC test_perf_atq.o
CC cperf_test_verify.o
CC iofwd.o
CC macfwd.o
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC test_atomic.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_barrier.o
LD dpdk-pdump
CC cperf_test_vector_parsing.o
CC csumonly.o
CC icmpecho.o
CC noisy_vnf.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_pipeline_atq.o
LD testpipeline
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_ticketlock.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC bpf_cmd.o
CC util.o
CC softnicfwd.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC cperf_test_common.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack_perf.o
CC test_stack.o
INSTALL-APP testpipeline
CC test_timer.o
INSTALL-MAP testpipeline.map
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
LD dpdk-test-eventdev
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
LD dpdk-test-crypto-perf
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
LD dpdk-test-compress-perf
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 07:22:13 TestVxlan: Test Case test_vxlan_ipv4_detect Result PASSED:
17/10/2019 07:22:13 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:22:16 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:22:20 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 07:31:28 dts:
TEST SUITE : TestVxlan
17/10/2019 07:31:28 dts: NIC : fortville_eagle
17/10/2019 07:31:28 dut.10.240.176.196:
17/10/2019 07:31:28 tester:
17/10/2019 07:31:28 TestVxlan: Test Case test_tunnel_filter Begin
17/10/2019 07:31:28 dut.10.240.176.196:
17/10/2019 07:31:29 tester:
17/10/2019 07:31:29 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:31:44 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:31:44 dut.10.240.176.196: set fwd rxonly
17/10/2019 07:31:44 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 07:31:44 dut.10.240.176.196: set verbose 1
17/10/2019 07:31:44 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 07:31:44 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:31:44 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:31:49 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:31:49 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:31:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 07:31:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 07:31:54 dut.10.240.176.196: start
17/10/2019 07:31:55 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:31:55 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268715.13 root@10.240.176.173:/tmp/tester/
17/10/2019 07:31:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268715.13 root@10.240.176.173:/tmp/tester/
17/10/2019 07:31:57 tester: python /tmp/tester/scapy_ens160f0.cmd1571268715.13
17/10/2019 07:31:58 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:32:00 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:32:00 dut.10.240.176.196: stop
17/10/2019 07:32:00 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:32:00 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 07:32:00 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 07:32:00 dut.10.240.176.196: start
17/10/2019 07:32:01 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:32:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268721.01 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268721.01 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:03 tester: python /tmp/tester/scapy_ens160f0.cmd1571268721.01
17/10/2019 07:32:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:32:06 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:32:06 dut.10.240.176.196: stop
17/10/2019 07:32:06 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:32:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 07:32:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 07:32:06 dut.10.240.176.196: start
17/10/2019 07:32:06 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:32:06 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268726.89 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:08 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268726.89 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:09 tester: python /tmp/tester/scapy_ens160f0.cmd1571268726.89
17/10/2019 07:32:10 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:32:12 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:32:12 dut.10.240.176.196: stop
17/10/2019 07:32:12 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:32:12 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 07:32:12 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 07:32:12 dut.10.240.176.196: start
17/10/2019 07:32:12 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:32:12 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268732.76 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268732.76 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:15 tester: python /tmp/tester/scapy_ens160f0.cmd1571268732.76
17/10/2019 07:32:16 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:32:18 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:32:18 dut.10.240.176.196: stop
17/10/2019 07:32:18 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:32:18 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:32:18 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:32:18 dut.10.240.176.196: start
17/10/2019 07:32:18 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:32:18 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268738.58 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:19 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268738.58 root@10.240.176.173:/tmp/tester/
17/10/2019 07:32:21 tester: python /tmp/tester/scapy_ens160f0.cmd1571268738.58
17/10/2019 07:32:22 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:32:24 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:32:24 dut.10.240.176.196: stop
17/10/2019 07:32:24 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:32:24 dut.10.240.176.196: quit
17/10/2019 07:32:27 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:32:27 TestVxlan: Test Case test_tunnel_filter Result PASSED:
17/10/2019 07:32:27 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:32:31 TestVxlan: Test Case test_tunnel_filter_invalid Begin
17/10/2019 07:32:31 dut.10.240.176.196:
17/10/2019 07:32:31 tester:
17/10/2019 07:32:31 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:32:43 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:32:43 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:32:43 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:32:48 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:32:48 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:32:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:32:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 07:32:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:32:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 07:32:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
17/10/2019 07:32:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 07:32:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
17/10/2019 07:32:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 07:32:54 dut.10.240.176.196: stop
17/10/2019 07:32:54 dut.10.240.176.196: stop
Packet forwarding not started
17/10/2019 07:32:54 dut.10.240.176.196: quit
17/10/2019 07:32:57 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:32:57 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
17/10/2019 07:32:57 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:33:01 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 07:33:01 dut.10.240.176.196:
17/10/2019 07:33:01 tester:
17/10/2019 07:33:01 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 07:33:13 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:33:13 dut.10.240.176.196: vlan set filter off 0
17/10/2019 07:33:13 dut.10.240.176.196: vlan set filter off 0
17/10/2019 07:33:13 dut.10.240.176.196: set fwd csum
17/10/2019 07:33:13 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 07:33:13 dut.10.240.176.196: port stop all
17/10/2019 07:33:13 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:33:13 dut.10.240.176.196: port stop all
17/10/2019 07:33:14 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 07:33:14 dut.10.240.176.196: csum set ip hw 1
17/10/2019 07:33:14 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 07:33:14 dut.10.240.176.196: port start all
17/10/2019 07:33:14 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:33:14 dut.10.240.176.196: port stop all
17/10/2019 07:33:14 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:33:14 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 07:33:14 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:33:14 dut.10.240.176.196: port start all
17/10/2019 07:33:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:33:15 dut.10.240.176.196: port stop all
17/10/2019 07:33:15 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:33:15 dut.10.240.176.196: csum set udp hw 1
17/10/2019 07:33:15 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:33:15 dut.10.240.176.196: port start all
17/10/2019 07:33:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:33:15 dut.10.240.176.196: port stop all
17/10/2019 07:33:15 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:33:15 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 07:33:16 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:33:16 dut.10.240.176.196: port start all
17/10/2019 07:33:16 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:33:16 dut.10.240.176.196: port stop all
17/10/2019 07:33:16 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:33:16 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 07:33:16 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:33:16 dut.10.240.176.196: port start all
17/10/2019 07:33:16 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:33:16 dut.10.240.176.196: port start all
17/10/2019 07:33:17 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 07:33:17 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 07:33:17 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:33:17 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:33:17 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:33:22 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:33:22 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:33:37 TestVxlan: chksums_ref{}
17/10/2019 07:33:37 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 07:33:37 dut.10.240.176.196: start
17/10/2019 07:33:37 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:33:37 tester: ls -d /tmp/tester/
17/10/2019 07:33:37 tester: /tmp/tester/
17/10/2019 07:33:37 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:33:37 tester:
17/10/2019 07:33:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268822.97 root@10.240.176.173:/tmp/tester/
17/10/2019 07:33:44 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268822.97 root@10.240.176.173:/tmp/tester/
17/10/2019 07:33:45 tester: python /tmp/tester/scapy_ens160f0.cmd1571268822.97
17/10/2019 07:33:46 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:34:05 TestVxlan: chksums{}
17/10/2019 07:34:05 dut.10.240.176.196: stop
17/10/2019 07:34:05 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:34:15 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:34:15 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 07:34:15 dut.10.240.176.196: start
17/10/2019 07:34:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:34:15 tester: ls -d /tmp/tester/
17/10/2019 07:34:15 tester: /tmp/tester/
17/10/2019 07:34:15 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:34:15 tester:
17/10/2019 07:34:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268860.86 root@10.240.176.173:/tmp/tester/
17/10/2019 07:34:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268860.86 root@10.240.176.173:/tmp/tester/
17/10/2019 07:34:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571268860.86
17/10/2019 07:34:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:34:43 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:34:43 dut.10.240.176.196: stop
17/10/2019 07:34:43 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:34:53 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:34:53 TestVxlan: vxlan packet [outer_ip_invalid = 1]
17/10/2019 07:34:53 dut.10.240.176.196: start
17/10/2019 07:34:53 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:34:53 tester: ls -d /tmp/tester/
17/10/2019 07:34:53 tester: /tmp/tester/
17/10/2019 07:34:53 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:34:53 tester:
17/10/2019 07:34:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268898.79 root@10.240.176.173:/tmp/tester/
17/10/2019 07:35:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268898.79 root@10.240.176.173:/tmp/tester/
17/10/2019 07:35:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571268898.79
17/10/2019 07:35:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:35:21 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:35:21 dut.10.240.176.196: stop
17/10/2019 07:35:21 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:35:31 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:35:31 TestVxlan: vxlan packet [inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 07:35:31 dut.10.240.176.196: start
17/10/2019 07:35:31 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:35:31 tester: ls -d /tmp/tester/
17/10/2019 07:35:31 tester: /tmp/tester/
17/10/2019 07:35:31 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:35:31 tester:
17/10/2019 07:35:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268936.76 root@10.240.176.173:/tmp/tester/
17/10/2019 07:35:38 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268936.76 root@10.240.176.173:/tmp/tester/
17/10/2019 07:35:39 tester: python /tmp/tester/scapy_ens160f0.cmd1571268936.76
17/10/2019 07:35:40 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:35:58 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:35:58 dut.10.240.176.196: stop
17/10/2019 07:35:59 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:36:09 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:36:09 TestVxlan: vxlan packet [inner_l4_invalid = 1]
17/10/2019 07:36:09 dut.10.240.176.196: start
17/10/2019 07:36:09 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:36:09 tester: ls -d /tmp/tester/
17/10/2019 07:36:09 tester: /tmp/tester/
17/10/2019 07:36:09 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:36:09 tester:
17/10/2019 07:36:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571268974.69 root@10.240.176.173:/tmp/tester/
17/10/2019 07:36:16 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571268974.69 root@10.240.176.173:/tmp/tester/
17/10/2019 07:36:17 tester: python /tmp/tester/scapy_ens160f0.cmd1571268974.69
17/10/2019 07:36:18 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:36:36 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:36:36 dut.10.240.176.196: stop
17/10/2019 07:36:37 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:36:47 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 07:36:47 TestVxlan: vxlan packet [inner_l4_type = TCP][inner_l4_invalid = 1]
17/10/2019 07:36:47 dut.10.240.176.196: start
17/10/2019 07:36:47 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:36:47 tester: ls -d /tmp/tester/
17/10/2019 07:36:47 tester: /tmp/tester/
17/10/2019 07:36:47 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:36:47 tester:
17/10/2019 07:36:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269012.6 root@10.240.176.173:/tmp/tester/
17/10/2019 07:36:54 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269012.6 root@10.240.176.173:/tmp/tester/
17/10/2019 07:36:55 tester: python /tmp/tester/scapy_ens160f0.cmd1571269012.6
17/10/2019 07:36:56 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:37:14 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 07:37:14 dut.10.240.176.196: stop
17/10/2019 07:37:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:37:24 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 07:37:24 TestVxlan: vxlan packet [inner_l4_type = SCTP][inner_l4_invalid = 1]
17/10/2019 07:37:24 dut.10.240.176.196: start
17/10/2019 07:37:25 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:37:25 tester: ls -d /tmp/tester/
17/10/2019 07:37:25 tester: /tmp/tester/
17/10/2019 07:37:25 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:37:25 tester:
17/10/2019 07:37:30 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269050.52 root@10.240.176.173:/tmp/tester/
17/10/2019 07:37:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269050.52 root@10.240.176.173:/tmp/tester/
17/10/2019 07:37:33 tester: python /tmp/tester/scapy_ens160f0.cmd1571269050.52
17/10/2019 07:37:34 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 07:37:52 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 07:37:52 dut.10.240.176.196: stop
17/10/2019 07:37:52 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:38:02 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:38:02 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip_invalid = 1]
17/10/2019 07:38:02 dut.10.240.176.196: start
17/10/2019 07:38:03 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:38:03 tester: ls -d /tmp/tester/
17/10/2019 07:38:03 tester: /tmp/tester/
17/10/2019 07:38:03 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:38:03 tester:
17/10/2019 07:38:08 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269088.44 root@10.240.176.173:/tmp/tester/
17/10/2019 07:38:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269088.44 root@10.240.176.173:/tmp/tester/
17/10/2019 07:38:11 tester: python /tmp/tester/scapy_ens160f0.cmd1571269088.44
17/10/2019 07:38:12 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:38:30 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:38:30 dut.10.240.176.196: stop
17/10/2019 07:38:30 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:38:40 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:38:40 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1]
17/10/2019 07:38:40 dut.10.240.176.196: start
17/10/2019 07:38:40 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:38:40 tester: ls -d /tmp/tester/
17/10/2019 07:38:41 tester: /tmp/tester/
17/10/2019 07:38:41 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:38:41 tester:
17/10/2019 07:38:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269126.35 root@10.240.176.173:/tmp/tester/
17/10/2019 07:38:47 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269126.35 root@10.240.176.173:/tmp/tester/
17/10/2019 07:38:49 tester: python /tmp/tester/scapy_ens160f0.cmd1571269126.35
17/10/2019 07:38:49 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:39:08 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:39:08 dut.10.240.176.196: stop
17/10/2019 07:39:08 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:39:18 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:39:18 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 07:39:18 dut.10.240.176.196: start
17/10/2019 07:39:18 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:39:18 tester: ls -d /tmp/tester/
17/10/2019 07:39:19 tester: /tmp/tester/
17/10/2019 07:39:19 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:39:19 tester:
17/10/2019 07:39:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269164.23 root@10.240.176.173:/tmp/tester/
17/10/2019 07:39:25 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269164.23 root@10.240.176.173:/tmp/tester/
17/10/2019 07:39:27 tester: python /tmp/tester/scapy_ens160f0.cmd1571269164.23
17/10/2019 07:39:27 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:39:46 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:39:46 dut.10.240.176.196: stop
17/10/2019 07:39:46 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:39:56 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:39:56 TestVxlan: vxlan packet [outer_vlan = 1][inner_vlan = 1][outer_ip_invalid = 1]
17/10/2019 07:39:56 dut.10.240.176.196: start
17/10/2019 07:39:56 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:39:56 tester: ls -d /tmp/tester/
17/10/2019 07:39:56 tester: /tmp/tester/
17/10/2019 07:39:56 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:39:57 tester:
17/10/2019 07:40:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269202.13 root@10.240.176.173:/tmp/tester/
17/10/2019 07:40:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269202.13 root@10.240.176.173:/tmp/tester/
17/10/2019 07:40:04 tester: python /tmp/tester/scapy_ens160f0.cmd1571269202.13
17/10/2019 07:40:05 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:40:24 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:40:24 dut.10.240.176.196: stop
17/10/2019 07:40:24 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:40:34 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:40:34 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][inner_vlan = 1]
17/10/2019 07:40:34 dut.10.240.176.196: start
17/10/2019 07:40:34 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:40:34 tester: ls -d /tmp/tester/
17/10/2019 07:40:34 tester: /tmp/tester/
17/10/2019 07:40:34 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:40:34 tester:
17/10/2019 07:40:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269240.02 root@10.240.176.173:/tmp/tester/
17/10/2019 07:40:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269240.02 root@10.240.176.173:/tmp/tester/
17/10/2019 07:40:42 tester: python /tmp/tester/scapy_ens160f0.cmd1571269240.02
17/10/2019 07:40:43 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=4590)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:41:02 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:41:02 dut.10.240.176.196: stop
17/10/2019 07:41:02 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:41:12 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:41:12 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][inner_vlan = 1][outer_ip_invalid = 1]
17/10/2019 07:41:12 dut.10.240.176.196: start
17/10/2019 07:41:12 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:41:12 tester: ls -d /tmp/tester/
17/10/2019 07:41:12 tester: /tmp/tester/
17/10/2019 07:41:12 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:41:12 tester:
17/10/2019 07:41:17 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269277.92 root@10.240.176.173:/tmp/tester/
17/10/2019 07:41:19 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269277.92 root@10.240.176.173:/tmp/tester/
17/10/2019 07:41:20 tester: python /tmp/tester/scapy_ens160f0.cmd1571269277.92
17/10/2019 07:41:21 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=4590)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:41:40 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:41:40 dut.10.240.176.196: stop
17/10/2019 07:41:40 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:41:50 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:41:50 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = UDP][inner_l4_invalid = 1]
17/10/2019 07:41:50 dut.10.240.176.196: start
17/10/2019 07:41:50 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:41:50 tester: ls -d /tmp/tester/
17/10/2019 07:41:50 tester: /tmp/tester/
17/10/2019 07:41:50 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:41:50 tester:
17/10/2019 07:41:55 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269315.81 root@10.240.176.173:/tmp/tester/
17/10/2019 07:41:57 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269315.81 root@10.240.176.173:/tmp/tester/
17/10/2019 07:41:58 tester: python /tmp/tester/scapy_ens160f0.cmd1571269315.81
17/10/2019 07:41:59 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:42:18 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:42:18 dut.10.240.176.196: stop
17/10/2019 07:42:18 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:42:28 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 07:42:28 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = TCP][inner_l4_invalid = 1]
17/10/2019 07:42:28 dut.10.240.176.196: start
17/10/2019 07:42:28 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:42:28 tester: ls -d /tmp/tester/
17/10/2019 07:42:28 tester: /tmp/tester/
17/10/2019 07:42:28 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:42:28 tester:
17/10/2019 07:42:33 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269353.73 root@10.240.176.173:/tmp/tester/
17/10/2019 07:42:35 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269353.73 root@10.240.176.173:/tmp/tester/
17/10/2019 07:42:36 tester: python /tmp/tester/scapy_ens160f0.cmd1571269353.73
17/10/2019 07:42:37 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:42:55 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 07:42:55 dut.10.240.176.196: stop
17/10/2019 07:42:56 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:43:06 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 07:43:06 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = SCTP][inner_l4_invalid = 1]
17/10/2019 07:43:06 dut.10.240.176.196: start
17/10/2019 07:43:06 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:43:06 tester: ls -d /tmp/tester/
17/10/2019 07:43:06 tester: /tmp/tester/
17/10/2019 07:43:06 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:43:06 tester:
17/10/2019 07:43:11 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269391.62 root@10.240.176.173:/tmp/tester/
17/10/2019 07:43:13 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269391.62 root@10.240.176.173:/tmp/tester/
17/10/2019 07:43:14 tester: python /tmp/tester/scapy_ens160f0.cmd1571269391.62
17/10/2019 07:43:15 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 07:43:33 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 07:43:33 dut.10.240.176.196: stop
17/10/2019 07:43:33 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:43:33 dut.10.240.176.196: quit
17/10/2019 07:43:38 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:43:38 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result PASSED:
17/10/2019 07:43:38 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:43:42 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 07:43:42 dut.10.240.176.196:
17/10/2019 07:43:42 tester:
17/10/2019 07:43:42 dut.10.240.176.196: cat config/common_base
17/10/2019 07:43:42 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 07:44:02 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 07:44:02 dut.10.240.176.196:
17/10/2019 07:44:02 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 07:44:02 dut.10.240.176.196:
17/10/2019 07:44:02 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 07:44:02 dut.10.240.176.196:
17/10/2019 07:44:02 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 07:44:02 dut.10.240.176.196:
17/10/2019 07:44:02 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 07:44:03 dut.10.240.176.196:
17/10/2019 07:44:03 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 07:44:03 dut.10.240.176.196:
17/10/2019 07:44:03 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 07:44:03 dut.10.240.176.196:
17/10/2019 07:44:03 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 07:46:06 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_debug.o
CC eal_memalloc.o
CC eal_lcore.o
CC eal_timer.o
CC eal_alarm.o
CC eal_interrupts.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_lcore.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_cfgfile
== Build lib/librte_timer
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_jobstats
== Build lib/librte_rcu
SYMLINK-FILE include/rte_cfgfile.h
CC rte_cfgfile.o
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_jobstats.h
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_stack.h
CC rte_metrics.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_stack_lf_generic.h
CC rte_pci.o
CC rte_meter.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_stack_lf_c11.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_timer.h
CC rte_stack.o
CC rte_rcu_qsbr.o
CC rte_ring.o
CC rte_timer.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
== Build lib/librte_hash
== Build lib/librte_mempool
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
SYMLINK-FILE include/rte_crypto.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_reorder.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_reorder.o
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/cmdline_parse_string.h
CC rte_sched.o
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
CC rte_red.o
CC rte_approx.o
CC ethdev_private.o
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC cmdline.o
CC rte_tm.o
CC rte_mtr.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC ethdev_profile.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_gro
== Build lib/librte_ip_frag
== Build lib/librte_latencystats
== Build lib/librte_bitratestats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_security.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_distributor.h
CC rte_gro.o
SYMLINK-FILE include/rte_bitrate.h
CC rte_kni.o
CC rte_pdump.o
CC rte_distributor_v20.o
CC rte_distributor.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_ip_frag.h
SYMLINK-FILE include/rte_latencystats.h
CC gro_tcp4.o
CC gro_vxlan_tcp4.o
CC rte_bitrate.o
CC rte_ipv4_fragmentation.o
CC rte_latencystats.o
SYMLINK-FILE include/bpf_def.h
CC rte_ipv6_fragmentation.o
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_ipv4_reassembly.o
SYMLINK-FILE include/rte_rawdev_pmd.h
CC rte_ipv6_reassembly.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_gso.h
CC rte_ip_frag_common.o
CC rte_rawdev.o
CC ip_frag_internal.o
CC bpf.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_vdpa.h
CC bpf_exec.o
CC rte_gso.o
CC bpf_load.o
CC gso_common.o
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC bpf_pkt.o
CC fd_man.o
CC iotlb.o
CC bpf_validate.o
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC bpf_jit_x86.o
CC socket.o
CC vhost.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC gso_udp4.o
CC vhost_user.o
CC virtio_net.o
CC vdpa.o
CC rte_eventdev.o
CC vhost_crypto.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_rawdev.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_flow_classify.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC octeontx_mbox.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/ifpga
== Build drivers/bus/fslmc
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_pci.h
CC pci_params.o
SYMLINK-FILE include/rte_bus_vmbus.h
CC linux/pci.o
SYMLINK-FILE include/rte_vmbus_reg.h
CC linux/pci_uio.o
CC linux/pci_vfio.o
CC pci_common.o
CC pci_common_uio.o
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC vmbus_common.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vdev_params.o
CC dpaa_bus.o
CC base/fman/netcfg_layer.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/dpbp.o
CC mc/dpio.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
Building modules, stage 2.
CC fslmc_vfio.o
CC fslmc_bus.o
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
LD portal/dpaa2_hw_dpci.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC dpaa_mempool.o
CC rte_mempool_bucket.o
CC rte_mempool_ring.o
CC rte_mempool_stack.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
AR librte_mempool_dpaa.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/crypto/scheduler
== Build drivers/net/dpaa
== Build drivers/crypto/null
== Build drivers/net/dpaa2
== Build drivers/crypto/octeontx
== Build drivers/crypto/caam_jr
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/nitrox
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/virtio
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/compress/octeontx
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
CC qat_comp.o
CC qat_comp_pmd.o
CC qat_device.o
== Build drivers/net/memif
== Build drivers/net/netvsc
== Build drivers/baseband/null
CC rte_eth_af_packet.o
CC ark_ddm.o
CC ena_ethdev.o
CC dpaa_sec.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC nitrox_device.o
SYMLINK-FILE include/rte_eth_bond.h
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC axgbe_ethdev.o
CC caam_jr.o
CC virtqueue.o
CC atl_rxtx.o
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_avp_common.h
CC lio_ethdev.o
CC cxgbe_ethdev.o
CC rte_eth_memif.o
CC dpaa_ethdev.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC failsafe.o
CC enetc_ethdev.o
CC otx_cryptodev.o
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
SYMLINK-FILE include/rte_avp_fifo.h
CC base/dpaa2_hw_dpni.o
CC iavf_adminq.o
CC hns3_ethdev.o
CC hinic_pmd_api_cmd.o
CC ipn3ke_ethdev.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC enic_ethdev.o
CC rte_eth_bond_api.o
CC dpaa2_sec_dpseci.o
CC hn_ethdev.o
CC avp_ethdev.o
CC bbdev_null.o
CC scheduler_pmd.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC i40e_adminq.o
CC fm10k_ethdev.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_ice.h
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
CC e1000_82540.o
LD qat_device.o
CC ice_common.o
CC ice_sched.o
CC e1000_82541.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD nitrox_device.o
LD otx_cryptodev.o
CC nitrox_hal.o
CC otx_cryptodev_capabilities.o
CC hinic_pmd_cfg.o
CC qat_common.o
CC dpaa2_rxtx.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC scheduler_pmd_ops.o
CC failsafe_args.o
CC nitrox_logs.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
LD axgbe_ethdev.o
LD hn_ethdev.o
LD bbdev_null.o
CC nitrox_sym.o
CC virtio_pci.o
CC axgbe_dev.o
CC hn_rxtx.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
CC e1000_82542.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
LD ipn3ke_ethdev.o
== Build drivers/baseband/turbo_sw
CC ipn3ke_representor.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC null_crypto_pmd_ops.o
LD ark_ethdev.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
CC rte_eth_bond_pmd.o
LD enic_ethdev.o
CC ark_ethdev_rx.o
LD otx_zip_pmd.o
CC otx_zip.o
CC enic_main.o
CC e1000_82543.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD dpaa_ethdev.o
CC otx_cryptodev_hw_access.o
CC dpaa_rxtx.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC bbdev_turbo_software.o
LD enetc_ethdev.o
CC enetc_rxtx.o
CC hinic_pmd_cmdq.o
CC qat_logs.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC lio_rxtx.o
CC qat_qp.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
CC atl_ethdev.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
PMDINFO rte_eth_memif.o.pmd.c
== Build drivers/net/nfp
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC memif_socket.o
CC e1000_82571.o
CC virtio_rxtx.o
CC rte_cryptodev_scheduler.o
CC ixgbe_82598.o
CC failsafe_eal.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC scheduler_roundrobin.o
CC nfp_cppcore.o
CC otx_cryptodev_mbox.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC lio_23xx_vf.o
CC nitrox_sym_capabilities.o
CC hinic_pmd_eqs.o
CC ixgbe_82599.o
CC e1000_82575.o
CC iavf_common.o
CC axgbe_mdio.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC axgbe_phy_impl.o
LD fm10k_ethdev.o
CC i40e_common.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC fm10k_rxtx.o
LD hns3_ethdev.o
LD bbdev_turbo_software.o
CC hns3_ethdev_vf.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
== Build drivers/baseband/fpga_lte_fec
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
== Build drivers/net/bnxt
CC failsafe_ops.o
CC otx_cryptodev_ops.o
CC ice_switch.o
CC ark_ethdev_tx.o
CC nitrox_sym_reqmgr.o
CC ipn3ke_tm.o
CC ipn3ke_flow.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC cxgbe_main.o
AR librte_pmd_memif.a
SYMLINK-FILE include/fpga_lte_fec.h
INSTALL-LIB librte_pmd_memif.a
CC fpga_lte_fec.o
== Build drivers/net/null
CC nfp_cpp_pcie_ops.o
CC hinic_pmd_hwdev.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC i40e_diag.o
LD ena_ethdev.o
CC ena_com.o
CC ixgbe_x540.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC virtio_cryptodev.o
CC atl_hw_regs.o
CC rte_eth_null.o
CC e1000_i210.o
CC enic_rxtx.o
CC hw_atl_utils.o
CC ixgbe_x550.o
CC ixgbe_phy.o
CC dpaa2_ethdev.o
CC dpaa2_flow.o
CC iavf_ethdev.o
CC nitrox_qp.o
CC bnxt_ethdev.o
CC i40e_hmc.o
CC e1000_api.o
CC lio_mbox.o
CC axgbe_i2c.o
CC scheduler_pkt_size_distr.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC hns3_cmd.o
CC e1000_ich8lan.o
CC ena_eth_com.o
CC hn_rndis.o
CC nfp_mutex.o
CC hn_nvs.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC dpaa2_mux.o
CC ark_mpu.o
CC hinic_pmd_hwif.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
AR librte_pmd_nitrox.a
CC iavf_vchnl.o
INSTALL-LIB librte_pmd_nitrox.a
CC hinic_pmd_mgmt.o
CC ixgbe_api.o
CC ark_pktchkr.o
CC hw_atl_llh.o
CC cxgbevf_main.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC sge.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC cxgbe_filter.o
CC cxgbe_flow.o
LD fpga_lte_fec.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
LD avp_ethdev.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
CC t4_hw.o
LD rte_eth_bond_pmd.o
AR librte_pmd_avp.a
CC axgbe_rxtx.o
INSTALL-LIB librte_pmd_avp.a
CC axgbe_rxtx_vec_sse.o
CC rte_eth_bond_args.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC dpaa2_sparser.o
CC hns3_mbx.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC caam_jr_capabilities.o
CC scheduler_failover.o
CC scheduler_multicore.o
CC ice_nvm.o
CC nfp_resource.o
CC ice_flex_pipe.o
CC ixgbe_vf.o
CC hw_atl_utils_fw2x.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC hw_atl_b0.o
CC fm10k_pf.o
CC mc/dpni.o
CC hn_vf.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC mc/dpkg.o
CC hinic_pmd_niccfg.o
CC ixgbe_hv_vf.o
CC ixgbe_dcb.o
CC ixgbe_dcb_82599.o
CC ixgbe_dcb_82598.o
CC ark_pktdir.o
CC ark_pktgen.o
CC rte_eth_bond_8023ad.o
CC rte_eth_bond_alb.o
CC ixgbe_mbx.o
CC caam_jr_hw.o
CC caam_jr_uio.o
CC hns3_rxtx.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
CC rte_pmd_atlantic.o
CC i40e_lan_hmc.o
CC nfp_crc.o
AR librte_pmd_null.a
CC nfp_mip.o
INSTALL-LIB librte_pmd_null.a
CC e1000_logs.o
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
== Build drivers/net/qede
CC e1000_mac.o
CC failsafe_rxtx.o
CC failsafe_ether.o
CC ice_flow.o
CC mc/dpdmux.o
CC ixgbe_rxtx.o
CC fm10k_tlv.o
CC e1000_manage.o
CC failsafe_flow.o
CC otx2_rx.o
AR librte_pmd_netvsc.a
CC octeontx_rxtx.o
INSTALL-LIB librte_pmd_netvsc.a
CC octeontx_pkovf.o
CC clip_tbl.o
CC enic_clsf.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC mps_tcam.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
CC enic_res.o
LD dpaa_sec.o
CC ecore_dev.o
LD octeontx_pkovf.o
AR librte_pmd_dpaa_sec.a
CC enic_flow.o
INSTALL-LIB librte_pmd_dpaa_sec.a
CC fm10k_common.o
CC i40e_nvm.o
CC bnxt_filter.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC bnxt_flow.o
CC bnxt_hwrm.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
== Build drivers/net/ring
CC rte_eth_bond_flow.o
CC e1000_mbx.o
AR librte_pmd_caam_jr.a
CC nfp_nffw.o
INSTALL-LIB librte_pmd_caam_jr.a
CC e1000_nvm.o
CC hinic_pmd_nicio.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC ark_rqp.o
LD bnxt_ethdev.o
== Build drivers/net/sfc
CC fm10k_mbx.o
CC ark_udm.o
CC hinic_pmd_wq.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC hinic_pmd_ethdev.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC failsafe_intr.o
LD iavf_ethdev.o
SYMLINK-FILE include/rte_eth_ring.h
CC iavf_rxtx.o
CC rte_eth_ring.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
CC octeontx_pkivf.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC octeontx_bgx.o
CC mc/dpseci.o
== Build drivers/net/tap
== Build drivers/net/thunderx
CC sfc_ethdev.o
== Build drivers/net/vdev_netvsc
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
LD octeontx_pkivf.o
CC i40e_dcb.o
CC octeontx_ethdev.o
CC e1000_osdep.o
CC sfc_kvargs.o
CC e1000_phy.o
CC e1000_vf.o
CC igb_ethdev.o
CC bnxt_ring.o
CC igb_rxtx.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC iavf_rxtx_vec_sse.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
CC nicvf_rxtx.o
CC vdev_netvsc.o
CC fm10k_vf.o
CC nicvf_hw.o
CC nicvf_mbox.o
CC igb_pf.o
CC base/vnic_cq.o
CC rte_eth_tap.o
CC igb_flow.o
CC fm10k_api.o
CC fm10k_rxtx_vec.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC hns3_rss.o
CC base/vnic_wq.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC base/vnic_dev.o
CC tap_flow.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC tap_netlink.o
CC tap_tcmsgs.o
CC tap_bpf_api.o
CC tap_intr.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
CC em_ethdev.o
CC hinic_pmd_rx.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC hinic_pmd_tx.o
== Build drivers/net/virtio
CC nfp_nsp.o
CC em_rxtx.o
CC nicvf_ethdev.o
CC ice_dcb.o
CC ice_fdir.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
CC bnxt_rxq.o
LD vdev_netvsc.o
AR librte_pmd_vdev_netvsc.a
CC virtqueue.o
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC nfp_nsp_cmds.o
CC nfp_nsp_eth.o
CC nfp_net.o
CC hns3_flow.o
CC hns3_fdir.o
CC i40e_ethdev.o
CC i40e_rxtx.o
CC i40e_ethdev_vf.o
CC ice_ethdev.o
CC i40e_pf.o
CC l2t.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC sfc.o
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC hns3_intr.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC hns3_stats.o
CC hns3_regs.o
CC base/vnic_intr.o
CC base/vnic_rq.o
CC ice_switch_filter.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC bnxt_rxr.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
CC virtio_pci.o
CC virtio_rxtx.o
LD nicvf_ethdev.o
CC otx2_tx.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC nicvf_bsvf.o
CC hns3_dcb.o
CC hns3_mp.o
CC t4vf_hw.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC nicvf_svf.o
== Build drivers/net/vmxnet3
== Build drivers/net/kni
== Build drivers/net/softnic
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
== Build drivers/net/vhost
== Build drivers/net/ifc
AR librte_pmd_e1000.a
CC enic_rxtx_vec_avx2.o
INSTALL-LIB librte_pmd_e1000.a
CC virtio_ethdev.o
CC virtio_rxtx_simple.o
CC virtio_rxtx_simple_sse.o
CC sfc_mcdi.o
CC vmxnet3_rxtx.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC sfc_intr.o
CC sfc_ev.o
CC rte_eth_kni.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
SYMLINK-FILE include/rte_eth_vhost.h
AR librte_pmd_thunderx_nicvf.a
CC rte_eth_vhost.o
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC i40e_fdir.o
CC i40e_flow.o
CC ifcvf_vdpa.o
CC vmxnet3_ethdev.o
CC virtio_user/vhost_user.o
CC ecore_hw.o
CC sfc_port.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC sfc_rx.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC sfc_tx.o
CC sfc_tso.o
CC bnxt_stats.o
CC virtio_user/vhost_kernel.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
LD rte_eth_kni.o
CC ixgbe_ethdev.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC virtio_user_ethdev.o
CC bnxt_txq.o
CC bnxt_txr.o
CC bnxt_vnic.o
CC otx2_tm.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC bnxt_irq.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC otx2_rss.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
CC ifcvf.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
CC rte_eth_softnic_pipeline.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC rte_eth_softnic_thread.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
LD rte_eth_tap.o
LD vmxnet3_ethdev.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC rte_eth_softnic_cli.o
CC rte_eth_softnic_flow.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC rte_eth_softnic_meter.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
CC bnxt_util.o
CC rte_eth_softnic_cryptodev.o
CC rte_pmd_bnxt.o
CC sfc_filter.o
CC sfc_flow.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC sfc_dp.o
CC sfc_ef10_rx.o
LD rte_eth_vhost.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
CC bnxt_rxtx_vec_sse.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC efx_bootcfg.o
CC rte_pmd_i40e.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC ecore_cxt.o
CC ecore_l2.o
CC ixgbe_fdir.o
CC efx_crc32.o
CC efx_ev.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC parser.o
CC efx_evb.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC efx_filter.o
LD ice_ethdev.o
CC efx_hash.o
CC efx_intr.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
CC efx_mon.o
CC efx_nic.o
CC conn.o
CC efx_nvram.o
CC efx_phy.o
CC otx2_mac.o
CC otx2_ptp.o
CC otx2_flow.o
CC otx2_link.o
CC otx2_vlan.o
CC efx_port.o
CC efx_proxy.o
CC otx2_stats.o
CC i40e_tm.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
CC i40e_vf_representor.o
CC otx2_lookup.o
CC efx_rx.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC otx2_flow_utils.o
CC mcdi_mon.o
CC ixgbe_pf.o
CC ixgbe_flow.o
CC siena_mac.o
CC siena_mcdi.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC ixgbe_rxtx_vec_sse.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
CC ixgbe_ipsec.o
CC rte_pmd_ixgbe.o
CC ixgbe_tm.o
CC ixgbe_vf_representor.o
CC siena_nic.o
CC siena_nvram.o
CC ecore_sp_commands.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC ecore_init_ops.o
CC ecore_mcp.o
CC ecore_int.o
CC ecore_dcbx.o
CC bcm_osal.o
CC ecore_sriov.o
CC ef10_ev.o
AR librte_pmd_bnxt.a
CC ef10_evb.o
INSTALL-LIB librte_pmd_bnxt.a
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
CC qede_rxtx.o
CC qede_filter.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
CC hunt_nic.o
CC medford_nic.o
LD ixgbe_ethdev.o
CC medford2_nic.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/opdl
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
CC skeleton_eventdev.o
CC dsw_evdev.o
CC dsw_event.o
CC dpaa_eventdev.o
CC dsw_xstats.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
CC opdl_ring.o
CC opdl_evdev.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC ssovf_evdev_selftest.o
CC opdl_test.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO timvf_probe.o.pmd.c
PMDINFO ssovf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
CC ssovf_probe.o.pmd.o
LD timvf_probe.o
LD ssovf_probe.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD sw_evdev.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ioat
== Build drivers/raw/ifpga
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ntb.o
CC ntb_hw_intel.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD otx2_dpi_rawdev.o
LD dpaa2_qdma.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/pdump
== Build app/test-cmdline
== Build app/proc-info
== Build app/test-bbdev
== Build app/test-crypto-perf
== Build app/test-acl
== Build app/test-eventdev
== Build app/test-pipeline
== Build app/test-compress-perf
CC cmdline_test.o
CC commands.o
CC main.o
CC test_bbdev.o
CC main.o
CC test_bbdev_perf.o
CC main.o
CC test_bbdev_vector.o
CC main.o
CC cperf_ops.o
CC cperf_options_parsing.o
CC evt_main.o
CC cperf_test_vectors.o
CC cperf_test_throughput.o
CC evt_options.o
CC evt_test.o
CC main.o
CC config.o
CC testpmd.o
CC cperf_test_latency.o
CC parameters.o
CC cmdline.o
CC init.o
CC cmdline_flow.o
CC runtime.o
CC cmdline_mtr.o
CC main.o
CC parser.o
CC cperf_test_pmd_cyclecount.o
CC main.o
CC cmdline_tm.o
CC cperf_test_verify.o
CC pipeline_stub.o
CC test_order_common.o
CC comp_perf_options_parse.o
CC pipeline_hash.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
LD cmdline_test
CC config.o
CC commands.o
CC test.o
CC resource.o
CC iofwd.o
CC macfwd.o
CC macswap.o
LD testacl
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC comp_perf_test_verify.o
LD dpdk-procinfo
CC pipeline_acl.o
CC test_order_queue.o
CC test_order_atq.o
CC test_resource.o
CC test_prefetch.o
CC test_byteorder.o
CC comp_perf_test_benchmark.o
CC test_per_lcore.o
CC flowgen.o
CC test_atomic.o
CC test_barrier.o
CC test_perf_common.o
CC test_malloc.o
CC test_perf_queue.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_perf_atq.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_cycles.o
CC test_pipeline_atq.o
LD dpdk-pdump
CC test_mcslock.o
CC rxonly.o
CC txonly.o
CC test_spinlock.o
CC csumonly.o
CC icmpecho.o
CC test_ticketlock.o
CC noisy_vnf.o
LD testpipeline
CC bpf_cmd.o
CC util.o
CC test_memory.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_memzone.o
CC softnicfwd.o
CC test_bitmap.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC comp_perf_test_common.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
INSTALL-APP testpipeline
CC test_memcpy_perf.o
CC test_member.o
INSTALL-MAP testpipeline.map
CC test_member_perf.o
LD dpdk-test-eventdev
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
LD dpdk-test-crypto-perf
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD testpmd
LD dpdk-test-compress-perf
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 07:46:06 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:46:18 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:46:18 dut.10.240.176.196: set fwd rxonly
17/10/2019 07:46:19 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 07:46:19 dut.10.240.176.196: set verbose 1
17/10/2019 07:46:19 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 07:46:19 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:46:19 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:46:24 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:46:24 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:46:29 TestVxlan: send vxlan pkts [outer_udp_dst = 1234]
17/10/2019 07:46:29 dut.10.240.176.196: start
17/10/2019 07:46:29 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:46:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269589.6 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269589.6 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:32 tester: python /tmp/tester/scapy_ens160f0.cmd1571269589.6
17/10/2019 07:46:33 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63338, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:46:35 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:46:35 TestVxlan: send vxlan pkts [inner_l4_type = UDP]
17/10/2019 07:46:35 dut.10.240.176.196: start
17/10/2019 07:46:35 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:46:35 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269595.31 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269595.31 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:37 tester: python /tmp/tester/scapy_ens160f0.cmd1571269595.31
17/10/2019 07:46:38 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:46:40 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:46:40 TestVxlan: send vxlan pkts [inner_l4_type = TCP]
17/10/2019 07:46:40 dut.10.240.176.196: start
17/10/2019 07:46:40 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:46:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269600.88 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269600.88 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:43 tester: python /tmp/tester/scapy_ens160f0.cmd1571269600.88
17/10/2019 07:46:44 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=40309)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:46:46 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:46:46 TestVxlan: send vxlan pkts [inner_l4_type = SCTP]
17/10/2019 07:46:46 dut.10.240.176.196: start
17/10/2019 07:46:46 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:46:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269606.48 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:47 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269606.48 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:49 tester: python /tmp/tester/scapy_ens160f0.cmd1571269606.48
17/10/2019 07:46:49 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=4564)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 07:46:51 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=128 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:46:51 TestVxlan: send vxlan pkts [outer_vlan = 1]
17/10/2019 07:46:51 dut.10.240.176.196: start
17/10/2019 07:46:52 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:46:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269612.06 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269612.06 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:54 tester: python /tmp/tester/scapy_ens160f0.cmd1571269612.06
17/10/2019 07:46:55 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:46:57 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:46:57 TestVxlan: send vxlan pkts [outer_vlan = 1][inner_vlan = 1]
17/10/2019 07:46:57 dut.10.240.176.196: start
17/10/2019 07:46:57 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 07:46:57 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571269617.65 root@10.240.176.173:/tmp/tester/
17/10/2019 07:46:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571269617.65 root@10.240.176.173:/tmp/tester/
17/10/2019 07:47:00 tester: python /tmp/tester/scapy_ens160f0.cmd1571269617.65
17/10/2019 07:47:01 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:47:03 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=118 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:47:03 dut.10.240.176.196: stop
17/10/2019 07:47:03 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 6 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:47:03 dut.10.240.176.196: quit
17/10/2019 07:47:06 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:47:06 dut.10.240.176.196: cat config/common_base
17/10/2019 07:47:06 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 07:47:06 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 07:47:07 dut.10.240.176.196:
17/10/2019 07:47:07 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 07:49:10 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_memalloc.o
CC eal_vfio_mp_sync.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_meter
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_cfgfile.h
CC rte_cfgfile.o
CC rte_metrics.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_jobstats.o
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_ring.h
CC rte_pci.o
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_stack_lf_c11.h
SYMLINK-FILE include/rte_meter.h
CC rte_timer.o
CC rte_ring.o
CC rte_meter.o
CC rte_stack.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_mempool.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_bbdev.o
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
AR librte_net.a
AR librte_hash.a
INSTALL-LIB librte_net.a
INSTALL-LIB librte_hash.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
CC rte_member_vbf.o
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_approx.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
CC rte_sched.o
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
CC rte_red.o
SYMLINK-FILE include/cmdline_cirbuf.h
CC rte_approx.o
SYMLINK-FILE include/cmdline_parse_portlist.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
CC cmdline.o
SYMLINK-FILE include/rte_mtr.h
CC cmdline_cirbuf.o
SYMLINK-FILE include/rte_mtr_driver.h
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC ethdev_private.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC rte_ethdev.o
CC cmdline_rdline.o
CC rte_class_eth.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
CC rte_flow.o
CC rte_tm.o
CC rte_mtr.o
CC ethdev_profile.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_pdump.h
CC rte_pdump.o
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_bpf_ethdev.h
SYMLINK-FILE include/rte_latencystats.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_kni.h
CC rte_distributor_v20.o
CC rte_gso.o
SYMLINK-FILE include/rte_ip_frag.h
CC rte_bitrate.o
CC rte_distributor.o
CC gso_common.o
CC rte_kni.o
CC rte_gro.o
CC rte_latencystats.o
CC rte_distributor_match_sse.o
CC gro_tcp4.o
CC bpf.o
SYMLINK-FILE include/rte_security.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_security_driver.h
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_eventdev.h
CC rte_ipv4_fragmentation.o
CC gro_vxlan_tcp4.o
CC bpf_exec.o
CC gso_udp4.o
CC rte_ipv6_fragmentation.o
CC rte_security.o
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC fd_man.o
CC bpf_load.o
CC bpf_pkt.o
SYMLINK-FILE include/rte_event_ring.h
CC rte_ipv4_reassembly.o
CC iotlb.o
CC rte_ipv6_reassembly.o
CC bpf_validate.o
CC rte_ip_frag_common.o
CC socket.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC bpf_jit_x86.o
SYMLINK-FILE include/rte_event_timer_adapter.h
CC vhost.o
CC vhost_user.o
CC ip_frag_internal.o
CC virtio_net.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC vdpa.o
CC vhost_crypto.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
INSTALL-LIB librte_rawdev.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC octeontx_mbox.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/vdev
== Build drivers/bus/pci
== Build drivers/bus/vmbus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
CC dpaa_bus.o
CC base/fman/fman.o
CC base/fman/of.o
CC base/fman/fman_hw.o
CC base/fman/netcfg_layer.o
CC base/qbman/process.o
CC base/qbman/bman_driver.o
CC base/qbman/bman.o
CC base/qbman/qman.o
SYMLINK-FILE include/rte_bus_pci.h
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC linux/pci.o
SYMLINK-FILE include/rte_bus_vdev.h
CC linux/pci_uio.o
CC linux/pci_vfio.o
CC pci_params.o
CC qbman/qbman_portal.o
CC vdev.o
CC linux/vmbus_bus.o
CC qbman/qbman_debug.o
CC mc/dpio.o
CC vmbus_common.o
CC pci_common.o
CC vdev_params.o
CC linux/vmbus_uio.o
CC mc/dpmng.o
CC mc/dpbp.o
CC pci_common_uio.o
CC vmbus_channel.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC vmbus_bufring.o
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC vmbus_common_uio.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
Building modules, stage 2.
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
LD portal/dpaa2_hw_dpci.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
CC portal/dpaa2_hw_dpio.o.pmd.o
INSTALL-MODULE igb_uio.ko
LD portal/dpaa2_hw_dpio.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
MODPOST 1 modules
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_dpaa.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-LIB librte_bus_dpaa.a
INSTALL-MODULE rte_kni.ko
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_bucket.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC rte_mempool_stack.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC rte_mempool_ring.o
CC dpaa_mempool.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/avp
== Build drivers/net/atlantic
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa2
== Build drivers/net/dpaa
== Build drivers/net/ena
== Build drivers/net/e1000
== Build drivers/net/enic
== Build drivers/compress/octeontx
== Build drivers/net/enetc
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hns3
== Build drivers/net/hinic
== Build drivers/net/i40e
== Build drivers/crypto/octeontx
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/crypto/scheduler
== Build drivers/crypto/dpaa2_sec
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
== Build drivers/crypto/null
== Build drivers/net/memif
== Build drivers/crypto/dpaa_sec
== Build drivers/net/netvsc
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/baseband/null
== Build drivers/baseband/fpga_lte_fec
== Build drivers/baseband/turbo_sw
CC qat_comp.o
SYMLINK-FILE include/rte_eth_bond.h
SYMLINK-FILE include/rte_avp_common.h
CC rte_eth_af_packet.o
CC otx_zip_pmd.o
CC nitrox_device.o
SYMLINK-FILE include/rte_pmd_dpaa.h
SYMLINK-FILE include/rte_eth_bond_8023ad.h
SYMLINK-FILE include/rte_avp_fifo.h
CC ena_ethdev.o
CC atl_rxtx.o
CC otx_cryptodev.o
CC ark_ddm.o
SYMLINK-FILE include/fpga_lte_fec.h
CC dpaa_sec.o
CC caam_jr.o
CC lio_ethdev.o
CC axgbe_ethdev.o
CC bbdev_null.o
CC cxgbe_ethdev.o
CC enetc_ethdev.o
CC dpaa_ethdev.o
CC hinic_pmd_api_cmd.o
CC hn_ethdev.o
CC rte_eth_bond_api.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC iavf_adminq.o
CC virtqueue.o
CC hns3_ethdev.o
CC rte_eth_memif.o
CC bbdev_turbo_software.o
CC avp_ethdev.o
CC failsafe.o
CC fpga_lte_fec.o
CC null_crypto_pmd.o
CC ipn3ke_ethdev.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC base/dpaa2_hw_dpni.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC dpaa2_sec_dpseci.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC enic_ethdev.o
CC i40e_adminq.o
CC fm10k_ethdev.o
CC scheduler_pmd.o
SYMLINK-FILE include/rte_pmd_ice.h
CC e1000_80003es2lan.o
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC e1000_82540.o
CC e1000_82541.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD nitrox_device.o
LD otx_cryptodev.o
CC nitrox_hal.o
CC otx_cryptodev_capabilities.o
CC qat_comp_pmd.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC dpaa2_rxtx.o
LD failsafe.o
CC hinic_pmd_cfg.o
CC failsafe_args.o
CC nitrox_logs.o
CC scheduler_pmd_ops.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD axgbe_ethdev.o
LD bbdev_null.o
LD ipn3ke_ethdev.o
CC nitrox_sym.o
CC e1000_82542.o
CC axgbe_dev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC ipn3ke_representor.o
CC axgbe_mdio.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC virtio_pci.o
CC hn_rxtx.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD otx_zip_pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
LD ark_ethdev.o
LD enic_ethdev.o
CC otx_zip.o
LD bbdev_turbo_software.o
CC enic_main.o
CC ark_ethdev_rx.o
AR librte_pmd_bbdev_turbo_sw.a
CC rte_eth_bond_pmd.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC e1000_82543.o
CC e1000_82571.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD dpaa_ethdev.o
CC otx_cryptodev_hw_access.o
CC dpaa_rxtx.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
LD enetc_ethdev.o
CC enetc_rxtx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD lio_ethdev.o
LD fpga_lte_fec.o
CC lio_rxtx.o
CC qat_device.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC hns3_ethdev_vf.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hns3_cmd.o
CC hinic_pmd_cmdq.o
CC rte_cryptodev_scheduler.o
CC scheduler_roundrobin.o
PMDINFO rte_eth_memif.o.pmd.c
CC atl_ethdev.o
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC failsafe_eal.o
CC ixgbe_82598.o
CC e1000_82575.o
CC memif_socket.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC virtio_rxtx.o
CC cxgbevf_ethdev.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC rte_eth_bond_args.o
CC iavf_common.o
CC scheduler_pkt_size_distr.o
CC otx_cryptodev_mbox.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC otx_cryptodev_ops.o
CC nitrox_sym_capabilities.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC qat_common.o
CC ixgbe_82599.o
CC axgbe_phy_impl.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC hinic_pmd_eqs.o
CC axgbe_i2c.o
CC fm10k_rxtx.o
CC fm10k_pf.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC ice_common.o
CC ice_sched.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
CC i40e_common.o
LD hns3_ethdev.o
CC axgbe_rxtx.o
CC failsafe_ops.o
CC ipn3ke_tm.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC hns3_mbx.o
LD cxgbevf_ethdev.o
LD hns3_ethdev_vf.o
CC cxgbe_main.o
CC cxgbevf_main.o
CC e1000_i210.o
CC ark_ethdev_tx.o
CC nitrox_sym_reqmgr.o
CC axgbe_rxtx_vec_sse.o
CC qat_logs.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC qat_qp.o
CC sge.o
CC cxgbe_filter.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC ena_com.o
CC iavf_ethdev.o
CC ixgbe_x540.o
CC e1000_api.o
CC e1000_ich8lan.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC hinic_pmd_hwdev.o
CC dpaa2_ethdev.o
CC atl_hw_regs.o
CC hw_atl_utils.o
CC enic_rxtx.o
CC fm10k_tlv.o
CC virtio_cryptodev.o
CC fm10k_common.o
CC fm10k_mbx.o
CC scheduler_failover.o
CC hns3_rxtx.o
CC hns3_rss.o
CC ixgbe_x550.o
CC ixgbe_phy.o
CC lio_23xx_vf.o
CC nitrox_qp.o
CC lio_mbox.o
CC fm10k_vf.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC ena_eth_com.o
CC caam_jr_capabilities.o
CC ipn3ke_flow.o
CC fm10k_api.o
CC caam_jr_hw.o
CC hn_rndis.o
CC ark_mpu.o
CC ark_pktchkr.o
CC scheduler_multicore.o
CC ixgbe_api.o
AR librte_pmd_nitrox.a
CC ixgbe_vf.o
INSTALL-LIB librte_pmd_nitrox.a
CC hns3_flow.o
CC e1000_logs.o
CC hw_atl_llh.o
CC ixgbe_hv_vf.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC ixgbe_dcb.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC hw_atl_utils_fw2x.o
CC hw_atl_b0.o
CC hn_nvs.o
CC hinic_pmd_hwif.o
AR librte_pmd_axgbe.a
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_ena.a
CC hinic_pmd_mgmt.o
CC rte_eth_bond_8023ad.o
CC fm10k_rxtx_vec.o
CC failsafe_rxtx.o
CC failsafe_ether.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC iavf_vchnl.o
CC iavf_rxtx.o
LD virtio_cryptodev.o
CC iavf_rxtx_vec_sse.o
AR librte_pmd_virtio_crypto.a
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_lio.a
CC ixgbe_dcb_82599.o
CC ixgbe_dcb_82598.o
CC e1000_mac.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC e1000_manage.o
CC dpaa2_flow.o
CC hn_vf.o
CC ixgbe_mbx.o
CC ixgbe_rxtx.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC ixgbe_ethdev.o
CC caam_jr_uio.o
CC ixgbe_fdir.o
CC rte_pmd_atlantic.o
CC e1000_mbx.o
CC e1000_nvm.o
CC dpaa2_mux.o
CC ixgbe_pf.o
CC ark_pktdir.o
CC ark_pktgen.o
CC ark_rqp.o
CC ark_udm.o
AR librte_pmd_ipn3ke.a
CC i40e_diag.o
INSTALL-LIB librte_pmd_ipn3ke.a
CC failsafe_flow.o
== Build drivers/net/nfp
== Build drivers/net/bnxt
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
CC mc/dpseci.o
CC hinic_pmd_wq.o
CC hinic_pmd_ethdev.o
CC e1000_osdep.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC ice_switch.o
CC e1000_phy.o
CC hns3_fdir.o
CC hns3_intr.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC ice_nvm.o
CC nfp_cppcore.o
CC bnxt_cpr.o
CC failsafe_intr.o
AR librte_pmd_netvsc.a
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_atlantic.a
CC nfp_cpp_pcie_ops.o
CC bnxt_ethdev.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
AR librte_pmd_caam_jr.a
LD dpaa2_mux.o
INSTALL-LIB librte_pmd_caam_jr.a
CC bnxt_filter.o
CC bnxt_flow.o
CC bnxt_hwrm.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
CC i40e_hmc.o
CC bnxt_ring.o
CC enic_clsf.o
CC enic_res.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC enic_flow.o
CC base/vnic_cq.o
CC base/vnic_wq.o
CC bnxt_rxq.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
CC bnxt_rxr.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC bnxt_stats.o
CC dpaa2_sparser.o
CC ice_flex_pipe.o
CC bnxt_txq.o
CC bnxt_txr.o
CC bnxt_vnic.o
CC ice_flow.o
CC bnxt_irq.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
CC e1000_vf.o
CC hns3_stats.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC i40e_lan_hmc.o
LD dpaa2_sec_dpseci.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC rte_eth_bond_alb.o
LD hinic_pmd_ethdev.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC nfp_mutex.o
CC nfp_resource.o
CC hinic_pmd_rx.o
CC hinic_pmd_tx.o
CC base/vnic_dev.o
CC nfp_crc.o
CC nfp_mip.o
CC igb_ethdev.o
CC igb_rxtx.o
CC nfp_nffw.o
CC bnxt_rxtx_vec_sse.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC nfp_hwinfo.o
CC mc/dpni.o
CC mc/dpkg.o
CC rte_eth_bond_flow.o
CC mc/dpdmux.o
CC base/vnic_intr.o
CC base/vnic_rq.o
CC i40e_nvm.o
CC i40e_dcb.o
CC i40e_ethdev.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC i40e_rxtx.o
CC igb_pf.o
CC i40e_rxtx_vec_sse.o
CC nfp_rtsym.o
CC nfp_nsp.o
CC enic_rxtx_vec_avx2.o
CC nfp_nsp_cmds.o
CC i40e_ethdev_vf.o
CC i40e_pf.o
CC nfp_nsp_eth.o
CC nfp_net.o
CC hns3_regs.o
CC hns3_dcb.o
CC i40e_fdir.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC i40e_flow.o
CC ice_dcb.o
CC ice_fdir.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC ice_ethdev.o
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
== Build drivers/net/null
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC ice_rxtx_vec_avx2.o
LD bnxt_ethdev.o
CC ice_generic_flow.o
CC rte_pmd_i40e.o
CC igb_flow.o
CC em_ethdev.o
CC cxgbe_flow.o
CC t4_hw.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC rte_eth_null.o
CC clip_tbl.o
CC mps_tcam.o
CC i40e_tm.o
CC l2t.o
CC t4vf_hw.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC i40e_vf_representor.o
CC hns3_mp.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC i40e_rxtx_vec_avx2.o
CC em_rxtx.o
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
== Build drivers/net/qede
== Build drivers/net/ring
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC ixgbe_flow.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
== Build drivers/net/sfc
== Build drivers/net/tap
== Build drivers/net/thunderx
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
== Build drivers/net/vdev_netvsc
CC ixgbe_rxtx_vec_sse.o
== Build drivers/net/virtio
== Build drivers/net/vmxnet3
CC otx2_rx.o
CC octeontx_rxtx.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC octeontx_pkovf.o
CC ecore_dev.o
CC ecore_hw.o
CC nicvf_rxtx.o
CC ixgbe_ipsec.o
CC sfc_ethdev.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC sfc_kvargs.o
== Build drivers/net/kni
== Build drivers/net/softnic
CC vdev_netvsc.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC virtqueue.o
CC virtio_pci.o
CC vmxnet3_rxtx.o
CC rte_eth_tap.o
CC nicvf_hw.o
CC rte_eth_kni.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
CC octeontx_pkivf.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC tap_flow.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC tap_netlink.o
CC tap_tcmsgs.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
LD octeontx_pkivf.o
CC octeontx_bgx.o
CC rte_pmd_ixgbe.o
CC octeontx_ethdev.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
CC tap_bpf_api.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC tap_intr.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC ixgbe_tm.o
== Build drivers/net/vhost
== Build drivers/net/ifc
CC virtio_rxtx.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC ixgbe_vf_representor.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
CC virtio_ethdev.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC virtio_rxtx_simple.o
CC ecore_cxt.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC ecore_l2.o
LD rte_eth_kni.o
CC ecore_sp_commands.o
SYMLINK-FILE include/rte_eth_vhost.h
AR librte_pmd_octeontx_crypto.a
CC rte_eth_vhost.o
INSTALL-LIB librte_pmd_octeontx_crypto.a
AR librte_pmd_kni.a
CC sfc.o
CC vmxnet3_ethdev.o
INSTALL-LIB librte_pmd_kni.a
CC ecore_init_fw_funcs.o
CC nicvf_mbox.o
CC ecore_spq.o
CC ifcvf_vdpa.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC virtio_rxtx_simple_sse.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC virtio_user/vhost_user.o
LD octeontx_ethdev.o
CC ifcvf.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
CC otx2_tx.o
CC nicvf_ethdev.o
CC otx2_tm.o
CC otx2_rss.o
CC nicvf_bsvf.o
CC nicvf_svf.o
CC otx2_mac.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
CC otx2_ptp.o
CC otx2_flow.o
CC ecore_init_ops.o
CC otx2_link.o
CC ecore_mcp.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC ecore_int.o
LD sfc_ethdev.o
CC ecore_dcbx.o
CC sfc_mcdi.o
CC otx2_vlan.o
CC otx2_stats.o
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
CC sfc_intr.o
LD ifcvf_vdpa.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC rte_eth_softnic_tap.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC sfc_ev.o
LD vmxnet3_ethdev.o
CC bcm_osal.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
CC sfc_port.o
CC sfc_rx.o
CC sfc_tx.o
CC sfc_tso.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC otx2_flow_utils.o
CC sfc_filter.o
CC sfc_flow.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC ecore_sriov.o
CC ecore_vf.o
LD rte_eth_vhost.o
CC qede_ethdev.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC sfc_dp.o
CC sfc_ef10_rx.o
CC qede_main.o
CC sfc_ef10_essb_rx.o
PMDINFO virtio_ethdev.o.pmd.c
CC otx2_ethdev_irq.o
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC qede_rxtx.o
CC otx2_ethdev_ops.o
CC rte_eth_softnic_action.o
CC rte_eth_softnic_pipeline.o
CC rte_eth_softnic_thread.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
CC efx_crc32.o
CC efx_ev.o
CC efx_evb.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
CC efx_filter.o
LD nicvf_ethdev.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC otx2_ethdev_debug.o
CC rte_eth_softnic_cli.o
CC efx_hash.o
CC efx_intr.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC qede_filter.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC efx_lic.o
CC conn.o
CC otx2_ethdev_devargs.o
CC efx_mac.o
CC efx_mcdi.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
CC efx_mon.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC efx_tunnel.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC efx_tx.o
CC efx_vpd.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
CC mcdi_mon.o
CC siena_mac.o
LD otx2_ethdev.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/octeontx2
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dsw_evdev.o
CC skeleton_eventdev.o
CC dsw_event.o
CC dpaa_eventdev.o
CC dsw_xstats.o
CC dpaa2_hw_dpcon.o
CC otx2_worker_dual.o
CC dpaa2_eventdev.o
CC otx2_worker.o
CC dpaa2_eventdev_selftest.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC sw_evdev.o
CC otx2_evdev_selftest.o
CC sw_evdev_worker.o
CC otx2_evdev_irq.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC sw_evdev_scheduler.o
CC opdl_ring.o
CC sw_evdev_xstats.o
CC opdl_evdev.o
CC ssovf_evdev_selftest.o
CC sw_evdev_selftest.o
CC ssovf_probe.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC timvf_worker.o
CC opdl_test.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_ioat_rawdev.h
CC skeleton_rawdev.o
SYMLINK-FILE include/rte_ioat_spec.h
CC skeleton_rawdev_test.o
CC ioat_rawdev.o
CC ioat_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_cmdif.o
CC otx2_dpi_test.o
CC dpaa2_qdma.o
CC ntb.o
CC ntb_hw_intel.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/pdump
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC test_bbdev.o
CC test_bbdev_perf.o
CC main.o
CC main.o
CC config.o
CC test_bbdev_vector.o
CC init.o
CC runtime.o
CC pipeline_stub.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC cmdline_test.o
CC commands.o
CC testpmd.o
CC pipeline_lpm_ipv6.o
CC evt_main.o
CC evt_options.o
CC parameters.o
CC pipeline_acl.o
CC main.o
CC cperf_ops.o
CC cmdline.o
CC evt_test.o
CC cmdline_flow.o
CC main.o
CC parser.o
CC cperf_options_parsing.o
CC test_order_common.o
CC cmdline_mtr.o
CC cperf_test_vectors.o
CC test_order_queue.o
CC cmdline_tm.o
CC cperf_test_throughput.o
CC test_order_atq.o
CC main.o
CC cperf_test_latency.o
LD cmdline_test
CC cperf_test_pmd_cyclecount.o
CC commands.o
CC test.o
CC comp_perf_options_parse.o
CC resource.o
CC test_resource.o
CC cperf_test_verify.o
LD testacl
CC config.o
CC iofwd.o
CC macfwd.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
LD dpdk-procinfo
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC csumonly.o
CC icmpecho.o
CC test_prefetch.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_barrier.o
CC noisy_vnf.o
CC test_perf_common.o
CC bpf_cmd.o
LD dpdk-pdump
CC util.o
CC softnicfwd.o
LD testpipeline
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_reciprocal_division_perf.o
CC test_perf_queue.o
INSTALL-APP dpdk-procinfo
CC test_perf_atq.o
CC test_pipeline_common.o
INSTALL-MAP dpdk-procinfo.map
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC comp_perf_test_common.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
INSTALL-APP dpdk-pdump
CC test_table.o
INSTALL-MAP dpdk-pdump.map
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
LD dpdk-test-eventdev
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
LD dpdk-test-crypto-perf
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD testpmd
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD dpdk-test-compress-perf
LD testbbdev
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 07:49:10 TestVxlan: Test Case test_vxlan_ipv4_detect Result PASSED:
17/10/2019 07:49:10 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:49:14 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:49:17 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 07:57:28 dts:
TEST SUITE : TestVxlan
17/10/2019 07:57:28 dts: NIC : fortville_eagle
17/10/2019 07:57:28 dut.10.240.176.196:
17/10/2019 07:57:28 tester:
17/10/2019 07:57:28 TestVxlan: Test Case test_tunnel_filter Begin
17/10/2019 07:57:28 dut.10.240.176.196:
17/10/2019 07:57:28 tester:
17/10/2019 07:57:28 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:57:43 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:57:43 dut.10.240.176.196: set fwd rxonly
17/10/2019 07:57:43 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 07:57:43 dut.10.240.176.196: set verbose 1
17/10/2019 07:57:44 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 07:57:44 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:57:44 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:57:49 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:57:49 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:57:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 07:57:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 07:57:54 dut.10.240.176.196: start
17/10/2019 07:57:54 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:57:54 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270274.56 root@10.240.176.173:/tmp/tester/
17/10/2019 07:57:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270274.56 root@10.240.176.173:/tmp/tester/
17/10/2019 07:57:57 tester: python /tmp/tester/scapy_ens160f0.cmd1571270274.56
17/10/2019 07:57:58 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:58:00 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:58:00 dut.10.240.176.196: stop
17/10/2019 07:58:00 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:58:00 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 07:58:00 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 07:58:00 dut.10.240.176.196: start
17/10/2019 07:58:00 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:58:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270280.57 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270280.57 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:03 tester: python /tmp/tester/scapy_ens160f0.cmd1571270280.57
17/10/2019 07:58:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:58:06 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:58:06 dut.10.240.176.196: stop
17/10/2019 07:58:06 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:58:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 07:58:06 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 07:58:06 dut.10.240.176.196: start
17/10/2019 07:58:06 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:58:06 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270286.45 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:07 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270286.45 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:09 tester: python /tmp/tester/scapy_ens160f0.cmd1571270286.45
17/10/2019 07:58:09 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:58:11 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:58:11 dut.10.240.176.196: stop
17/10/2019 07:58:12 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:58:12 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 07:58:12 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 07:58:12 dut.10.240.176.196: start
17/10/2019 07:58:12 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:58:12 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270292.33 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:13 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270292.33 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:15 tester: python /tmp/tester/scapy_ens160f0.cmd1571270292.33
17/10/2019 07:58:15 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:58:17 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:58:17 dut.10.240.176.196: stop
17/10/2019 07:58:17 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:58:17 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:58:18 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:58:18 dut.10.240.176.196: start
17/10/2019 07:58:18 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 07:58:18 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270298.21 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:19 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270298.21 root@10.240.176.173:/tmp/tester/
17/10/2019 07:58:20 tester: python /tmp/tester/scapy_ens160f0.cmd1571270298.21
17/10/2019 07:58:21 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 07:58:23 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 07:58:23 dut.10.240.176.196: stop
17/10/2019 07:58:23 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:58:23 dut.10.240.176.196: quit
17/10/2019 07:58:27 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:58:27 TestVxlan: Test Case test_tunnel_filter Result PASSED:
17/10/2019 07:58:27 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:58:31 TestVxlan: Test Case test_tunnel_filter_invalid Begin
17/10/2019 07:58:31 dut.10.240.176.196:
17/10/2019 07:58:31 tester:
17/10/2019 07:58:31 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 07:58:43 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:58:43 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:58:43 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:58:48 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:58:48 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:58:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:58:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 07:58:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
17/10/2019 07:58:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 07:58:53 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
17/10/2019 07:58:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 07:58:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
17/10/2019 07:58:54 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 07:58:54 dut.10.240.176.196: stop
17/10/2019 07:58:54 dut.10.240.176.196: stop
Packet forwarding not started
17/10/2019 07:58:54 dut.10.240.176.196: quit
17/10/2019 07:58:57 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 07:58:57 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
17/10/2019 07:58:57 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 07:59:01 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 07:59:01 dut.10.240.176.196:
17/10/2019 07:59:01 tester:
17/10/2019 07:59:01 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 07:59:13 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:59:13 dut.10.240.176.196: vlan set filter off 0
17/10/2019 07:59:13 dut.10.240.176.196: vlan set filter off 0
17/10/2019 07:59:13 dut.10.240.176.196: set fwd csum
17/10/2019 07:59:13 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 07:59:13 dut.10.240.176.196: port stop all
17/10/2019 07:59:14 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:59:14 dut.10.240.176.196: port stop all
17/10/2019 07:59:14 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 07:59:14 dut.10.240.176.196: csum set ip hw 1
17/10/2019 07:59:14 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 07:59:14 dut.10.240.176.196: port start all
17/10/2019 07:59:14 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:59:14 dut.10.240.176.196: port stop all
17/10/2019 07:59:14 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:59:14 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 07:59:14 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:59:14 dut.10.240.176.196: port start all
17/10/2019 07:59:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:59:15 dut.10.240.176.196: port stop all
17/10/2019 07:59:15 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:59:15 dut.10.240.176.196: csum set udp hw 1
17/10/2019 07:59:15 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:59:15 dut.10.240.176.196: port start all
17/10/2019 07:59:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:59:15 dut.10.240.176.196: port stop all
17/10/2019 07:59:16 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:59:16 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 07:59:16 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:59:16 dut.10.240.176.196: port start all
17/10/2019 07:59:16 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:59:16 dut.10.240.176.196: port stop all
17/10/2019 07:59:16 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 07:59:16 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 07:59:16 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:59:16 dut.10.240.176.196: port start all
17/10/2019 07:59:17 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 07:59:17 dut.10.240.176.196: port start all
17/10/2019 07:59:17 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 07:59:17 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 07:59:17 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 07:59:17 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:59:17 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 07:59:22 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:59:22 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 07:59:28 TestVxlan: chksums_ref{}
17/10/2019 07:59:28 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 07:59:28 dut.10.240.176.196: start
17/10/2019 07:59:28 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:59:28 tester: ls -d /tmp/tester/
17/10/2019 07:59:28 tester: /tmp/tester/
17/10/2019 07:59:28 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:59:28 tester:
17/10/2019 07:59:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270374.05 root@10.240.176.173:/tmp/tester/
17/10/2019 07:59:35 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270374.05 root@10.240.176.173:/tmp/tester/
17/10/2019 07:59:36 tester: python /tmp/tester/scapy_ens160f0.cmd1571270374.05
17/10/2019 07:59:37 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 07:59:47 TestVxlan: chksums{}
17/10/2019 07:59:47 dut.10.240.176.196: stop
17/10/2019 07:59:47 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 07:59:48 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 07:59:48 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 07:59:48 dut.10.240.176.196: start
17/10/2019 07:59:48 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 07:59:48 tester: ls -d /tmp/tester/
17/10/2019 07:59:48 tester: /tmp/tester/
17/10/2019 07:59:48 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 07:59:48 tester:
17/10/2019 07:59:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270393.91 root@10.240.176.173:/tmp/tester/
17/10/2019 07:59:55 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270393.91 root@10.240.176.173:/tmp/tester/
17/10/2019 07:59:56 tester: python /tmp/tester/scapy_ens160f0.cmd1571270393.91
17/10/2019 07:59:57 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:00:07 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 662, in test_vxlan_ipv4_checksum_offload
self.send_and_check(inner_ip_invalid=1)
File "tests/TestSuite_vxlan.py", line 451, in send_and_check
chksums = config.get_chksums(pkt=pkt)
File "tests/TestSuite_vxlan.py", line 203, in get_chksums
if pkt[0].guess_payload_class(pkt[0]).name == "802.1Q":
TypeError: 'NoneType' object has no attribute '__getitem__'
17/10/2019 08:00:07 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:00:12 dut.10.240.176.196:
17/10/2019 08:00:12 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 08:00:12 dut.10.240.176.196:
17/10/2019 08:00:12 tester:
17/10/2019 08:00:12 dut.10.240.176.196: cat config/common_base
17/10/2019 08:00:13 dut.10.240.176.196: Killed
17/10/2019 08:00:23 TestVxlan: Test Case test_vxlan_ipv4_detect Result ERROR: Traceback (most recent call last):
File "/home/autoregression/zhushaui/framework/test_case.py", line 316, in _execute_test_case
case_obj()
File "tests/TestSuite_vxlan.py", line 527, in test_vxlan_ipv4_detect
src_vec_model = re.search("%s=." % self.compile_switch, out).group()[-1]
AttributeError: 'NoneType' object has no attribute 'group'
17/10/2019 08:00:23 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:00:26 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Begin
17/10/2019 08:00:26 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
[PEXPECT]#
17/10/2019 08:00:26 tester:
17/10/2019 08:00:26 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 08:00:38 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:38 dut.10.240.176.196: vlan set filter off 0
17/10/2019 08:00:38 dut.10.240.176.196: vlan set filter off 0
17/10/2019 08:00:38 dut.10.240.176.196: set fwd csum
17/10/2019 08:00:38 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 08:00:38 dut.10.240.176.196: port stop all
17/10/2019 08:00:38 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:00:38 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 08:00:39 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:00:39 dut.10.240.176.196: port start all
17/10/2019 08:00:39 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:39 dut.10.240.176.196: port stop all
17/10/2019 08:00:39 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:00:39 dut.10.240.176.196: csum set udp hw 1
17/10/2019 08:00:39 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:00:39 dut.10.240.176.196: port start all
17/10/2019 08:00:39 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:39 dut.10.240.176.196: port stop all
17/10/2019 08:00:40 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:00:40 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 08:00:40 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:00:40 dut.10.240.176.196: port start all
17/10/2019 08:00:40 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:40 dut.10.240.176.196: port stop all
17/10/2019 08:00:40 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:00:40 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 08:00:40 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:00:40 dut.10.240.176.196: port start all
17/10/2019 08:00:41 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:41 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 08:00:41 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:00:41 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:00:41 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:00:46 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:00:46 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:00:51 dut.10.240.176.196: port stop all
17/10/2019 08:00:51 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:00:51 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:00:51 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:00:51 dut.10.240.176.196: port start all
17/10/2019 08:00:52 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:52 dut.10.240.176.196: port stop all
17/10/2019 08:00:52 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:00:52 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:00:52 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:00:52 dut.10.240.176.196: port start all
17/10/2019 08:00:52 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:00:53 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:00:53 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:00:53 dut.10.240.176.196: start
17/10/2019 08:00:54 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:00:54 tester: ls -d /tmp/tester/
17/10/2019 08:00:54 tester: /tmp/tester/
17/10/2019 08:00:54 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:00:54 tester:
17/10/2019 08:00:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270459.41 root@10.240.176.173:/tmp/tester/
17/10/2019 08:01:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270459.41 root@10.240.176.173:/tmp/tester/
17/10/2019 08:01:02 tester: python /tmp/tester/scapy_ens160f0.cmd1571270459.41
17/10/2019 08:01:03 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:01:12 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:01:12 dut.10.240.176.196: stop
17/10/2019 08:01:12 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:01:12 dut.10.240.176.196: port stop all
17/10/2019 08:01:13 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:01:13 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:01:13 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:01:13 dut.10.240.176.196: port start all
17/10/2019 08:01:13 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:01:13 dut.10.240.176.196: port stop all
17/10/2019 08:01:13 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:01:13 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:01:13 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:01:13 dut.10.240.176.196: port start all
17/10/2019 08:01:14 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:01:15 TestVxlan: chksums_ref{}
17/10/2019 08:01:15 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:01:15 dut.10.240.176.196: start
17/10/2019 08:01:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:01:15 tester: ls -d /tmp/tester/
17/10/2019 08:01:15 tester: /tmp/tester/
17/10/2019 08:01:15 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:01:15 tester:
17/10/2019 08:01:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270480.59 root@10.240.176.173:/tmp/tester/
17/10/2019 08:01:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270480.59 root@10.240.176.173:/tmp/tester/
17/10/2019 08:01:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571270480.59
17/10/2019 08:01:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:01:33 TestVxlan: chksums{}
17/10/2019 08:01:33 dut.10.240.176.196: stop
17/10/2019 08:01:33 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:01:33 dut.10.240.176.196: port stop all
17/10/2019 08:01:34 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:01:34 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:01:34 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:01:34 dut.10.240.176.196: port start all
17/10/2019 08:01:34 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:01:34 dut.10.240.176.196: port stop all
17/10/2019 08:01:34 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:01:34 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:01:34 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:01:34 dut.10.240.176.196: port start all
17/10/2019 08:01:35 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:01:36 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:01:36 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_ip_invalid = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:01:36 dut.10.240.176.196: start
17/10/2019 08:01:36 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:01:36 tester: ls -d /tmp/tester/
17/10/2019 08:01:36 tester: /tmp/tester/
17/10/2019 08:01:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:01:36 tester:
17/10/2019 08:01:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270501.75 root@10.240.176.173:/tmp/tester/
17/10/2019 08:01:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270501.75 root@10.240.176.173:/tmp/tester/
17/10/2019 08:01:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571270501.75
17/10/2019 08:01:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=6473)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:01:54 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:01:54 dut.10.240.176.196: stop
17/10/2019 08:01:55 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:01:55 dut.10.240.176.196: port stop all
17/10/2019 08:01:55 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:01:55 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:01:55 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:01:55 dut.10.240.176.196: port start all
17/10/2019 08:01:55 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:01:55 dut.10.240.176.196: port stop all
17/10/2019 08:01:55 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:01:55 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:01:56 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:01:56 dut.10.240.176.196: port start all
17/10/2019 08:01:56 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:01:57 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:01:57 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:01:57 dut.10.240.176.196: start
17/10/2019 08:01:57 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:01:57 tester: ls -d /tmp/tester/
17/10/2019 08:01:57 tester: /tmp/tester/
17/10/2019 08:01:57 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:01:57 tester:
17/10/2019 08:02:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270522.91 root@10.240.176.173:/tmp/tester/
17/10/2019 08:02:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270522.91 root@10.240.176.173:/tmp/tester/
17/10/2019 08:02:05 tester: python /tmp/tester/scapy_ens160f0.cmd1571270522.91
17/10/2019 08:02:06 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:02:16 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:02:16 dut.10.240.176.196: stop
17/10/2019 08:02:16 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:02:16 dut.10.240.176.196: port stop all
17/10/2019 08:02:16 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:02:16 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:02:16 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:02:16 dut.10.240.176.196: port start all
17/10/2019 08:02:16 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:02:16 dut.10.240.176.196: port stop all
17/10/2019 08:02:17 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:02:17 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:02:17 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:02:17 dut.10.240.176.196: port start all
17/10/2019 08:02:17 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:02:18 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:02:18 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:02:18 dut.10.240.176.196: start
17/10/2019 08:02:18 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:02:18 tester: ls -d /tmp/tester/
17/10/2019 08:02:18 tester: /tmp/tester/
17/10/2019 08:02:18 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:02:18 tester:
17/10/2019 08:02:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270544.03 root@10.240.176.173:/tmp/tester/
17/10/2019 08:02:25 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270544.03 root@10.240.176.173:/tmp/tester/
17/10/2019 08:02:26 tester: python /tmp/tester/scapy_ens160f0.cmd1571270544.03
17/10/2019 08:02:27 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:02:37 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:02:37 dut.10.240.176.196: stop
17/10/2019 08:02:37 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:02:37 dut.10.240.176.196: port stop all
17/10/2019 08:02:37 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:02:37 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:02:37 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:02:37 dut.10.240.176.196: port start all
17/10/2019 08:02:37 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:02:37 dut.10.240.176.196: port stop all
17/10/2019 08:02:38 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:02:38 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:02:38 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:02:38 dut.10.240.176.196: port start all
17/10/2019 08:02:38 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:02:39 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:02:39 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:02:39 dut.10.240.176.196: start
17/10/2019 08:02:39 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:02:39 tester: ls -d /tmp/tester/
17/10/2019 08:02:40 tester: /tmp/tester/
17/10/2019 08:02:40 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:02:40 tester:
17/10/2019 08:02:45 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270565.18 root@10.240.176.173:/tmp/tester/
17/10/2019 08:02:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270565.18 root@10.240.176.173:/tmp/tester/
17/10/2019 08:02:47 tester: python /tmp/tester/scapy_ens160f0.cmd1571270565.18
17/10/2019 08:02:48 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:02:58 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:02:58 dut.10.240.176.196: stop
17/10/2019 08:02:58 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:02:58 dut.10.240.176.196: port stop all
17/10/2019 08:02:58 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:02:58 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:02:58 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:02:58 dut.10.240.176.196: port start all
17/10/2019 08:02:59 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:02:59 dut.10.240.176.196: port stop all
17/10/2019 08:02:59 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:02:59 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:02:59 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:02:59 dut.10.240.176.196: port start all
17/10/2019 08:02:59 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:03:00 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:03:00 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:03:00 dut.10.240.176.196: start
17/10/2019 08:03:00 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:03:00 tester: ls -d /tmp/tester/
17/10/2019 08:03:01 tester: /tmp/tester/
17/10/2019 08:03:01 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:03:01 tester:
17/10/2019 08:03:06 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270586.29 root@10.240.176.173:/tmp/tester/
17/10/2019 08:03:07 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270586.29 root@10.240.176.173:/tmp/tester/
17/10/2019 08:03:09 tester: python /tmp/tester/scapy_ens160f0.cmd1571270586.29
17/10/2019 08:03:09 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:03:19 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:03:19 dut.10.240.176.196: stop
17/10/2019 08:03:19 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:03:19 dut.10.240.176.196: port stop all
17/10/2019 08:03:19 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:03:19 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:03:19 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:03:19 dut.10.240.176.196: port start all
17/10/2019 08:03:20 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:03:20 dut.10.240.176.196: port stop all
17/10/2019 08:03:20 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:03:20 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:03:20 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:03:20 dut.10.240.176.196: port start all
17/10/2019 08:03:20 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:03:21 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:03:21 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:03:21 dut.10.240.176.196: start
17/10/2019 08:03:22 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:03:22 tester: ls -d /tmp/tester/
17/10/2019 08:03:22 tester: /tmp/tester/
17/10/2019 08:03:22 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:03:22 tester:
17/10/2019 08:03:27 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270607.43 root@10.240.176.173:/tmp/tester/
17/10/2019 08:03:28 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270607.43 root@10.240.176.173:/tmp/tester/
17/10/2019 08:03:30 tester: python /tmp/tester/scapy_ens160f0.cmd1571270607.43
17/10/2019 08:03:31 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:03:40 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:03:40 dut.10.240.176.196: stop
17/10/2019 08:03:40 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:03:40 dut.10.240.176.196: port stop all
17/10/2019 08:03:41 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:03:41 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:03:41 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:03:41 dut.10.240.176.196: port start all
17/10/2019 08:03:41 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:03:41 dut.10.240.176.196: port stop all
17/10/2019 08:03:41 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:03:41 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:03:41 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:03:41 dut.10.240.176.196: port start all
17/10/2019 08:03:42 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:03:43 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:03:43 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
17/10/2019 08:03:43 dut.10.240.176.196: start
17/10/2019 08:03:43 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:03:43 tester: ls -d /tmp/tester/
17/10/2019 08:03:43 tester: /tmp/tester/
17/10/2019 08:03:43 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:03:43 tester:
17/10/2019 08:03:48 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270628.57 root@10.240.176.173:/tmp/tester/
17/10/2019 08:03:50 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270628.57 root@10.240.176.173:/tmp/tester/
17/10/2019 08:03:51 tester: python /tmp/tester/scapy_ens160f0.cmd1571270628.57
17/10/2019 08:03:52 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=80, fl=0, tc=0)/UDP(dport=4789, sport=63, len=80, chksum=437)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:04:01 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:04:01 dut.10.240.176.196: stop
17/10/2019 08:04:01 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:04:01 dut.10.240.176.196: port stop all
17/10/2019 08:04:02 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:04:02 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:04:02 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:04:02 dut.10.240.176.196: port start all
17/10/2019 08:04:02 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:04:02 dut.10.240.176.196: port stop all
17/10/2019 08:04:02 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:04:02 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:04:02 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:04:02 dut.10.240.176.196: port start all
17/10/2019 08:04:03 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:04:04 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:04:04 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
17/10/2019 08:04:04 dut.10.240.176.196: start
17/10/2019 08:04:04 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:04:04 tester: ls -d /tmp/tester/
17/10/2019 08:04:04 tester: /tmp/tester/
17/10/2019 08:04:04 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:04:04 tester:
17/10/2019 08:04:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270649.71 root@10.240.176.173:/tmp/tester/
17/10/2019 08:04:11 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270649.71 root@10.240.176.173:/tmp/tester/
17/10/2019 08:04:12 tester: python /tmp/tester/scapy_ens160f0.cmd1571270649.71
17/10/2019 08:04:13 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=92, fl=0, tc=0)/UDP(dport=4789, sport=63, len=92, chksum=37306)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:04:22 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:04:22 dut.10.240.176.196: stop
17/10/2019 08:04:23 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:04:23 dut.10.240.176.196: quit
17/10/2019 08:04:27 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:04:27 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Result PASSED:
17/10/2019 08:04:27 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:04:31 TestVxlan: Test Case test_vxlan_ipv6_detect Begin
17/10/2019 08:04:31 dut.10.240.176.196:
17/10/2019 08:04:31 tester:
17/10/2019 08:04:31 dut.10.240.176.196: cat config/common_base
17/10/2019 08:04:31 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 08:04:31 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 08:04:31 dut.10.240.176.196:
17/10/2019 08:04:31 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 08:04:31 dut.10.240.176.196:
17/10/2019 08:04:31 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 08:04:31 dut.10.240.176.196:
17/10/2019 08:04:31 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 08:04:32 dut.10.240.176.196:
17/10/2019 08:04:32 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 08:04:32 dut.10.240.176.196:
17/10/2019 08:04:32 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 08:04:32 dut.10.240.176.196:
17/10/2019 08:04:32 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 08:04:32 dut.10.240.176.196:
17/10/2019 08:04:32 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 08:06:34 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_launch.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_ring_c11_mem.h
CC rte_pci.o
CC rte_cfgfile.o
CC rte_ring.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_timer.o
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_stack.o
SYMLINK-FILE include/rte_metrics.h
CC rte_stack_std.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_meter.h
CC rte_stack_lf.o
CC rte_metrics.o
CC rte_meter.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_net.o
CC rte_compressdev.o
CC rte_net_crc.o
SYMLINK-FILE include/rte_crypto.h
CC rte_ether.o
CC rte_compressdev_pmd.o
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
CC rte_comp.o
CC rte_arp.o
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_lpm
== Build lib/librte_efd
== Build lib/librte_member
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/rte_approx.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/cmdline_parse_portlist.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
CC rte_sched.o
SYMLINK-FILE include/rte_eth_ctrl.h
CC cmdline.o
CC rte_red.o
SYMLINK-FILE include/rte_dev_info.h
CC rte_approx.o
SYMLINK-FILE include/rte_flow.h
CC cmdline_parse.o
CC cmdline_cirbuf.o
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
CC cmdline_parse_string.o
CC cmdline_rdline.o
SYMLINK-FILE include/rte_mtr_driver.h
CC cmdline_vt100.o
CC cmdline_socket.o
CC ethdev_private.o
CC cmdline_parse_portlist.o
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC rte_tm.o
CC rte_mtr.o
AR librte_reorder.a
CC ethdev_profile.o
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/rte_member.h
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_member.o
CC rte_member_ht.o
SYMLINK-FILE include/rte_efd.h
CC rte_member_vbf.o
CC rte_lpm.o
CC rte_efd.o
CC rte_lpm6.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_latencystats.h
CC rte_latencystats.o
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC rte_bitrate.o
CC rte_gro.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
SYMLINK-FILE include/rte_gso.h
CC rte_security.o
CC gro_tcp4.o
SYMLINK-FILE include/rte_ip_frag.h
CC rte_pdump.o
SYMLINK-FILE include/rte_kni.h
CC rte_gso.o
CC gro_vxlan_tcp4.o
CC gso_common.o
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_kni.o
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/rte_vhost.h
CC gso_tcp4.o
CC rte_ipv4_fragmentation.o
CC gso_tunnel_tcp4.o
CC rte_ipv6_fragmentation.o
SYMLINK-FILE include/rte_vdpa.h
CC rte_ipv4_reassembly.o
CC rte_event_eth_rx_adapter.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_ipv6_reassembly.o
CC rte_ip_frag_common.o
CC rte_event_timer_adapter.o
SYMLINK-FILE include/rte_bpf.h
CC rte_distributor_v20.o
CC ip_frag_internal.o
CC fd_man.o
CC rte_distributor.o
CC gso_udp4.o
CC iotlb.o
CC rte_distributor_match_sse.o
CC socket.o
CC vhost.o
CC rte_event_crypto_adapter.o
SYMLINK-FILE include/rte_bpf_ethdev.h
CC vhost_user.o
CC rte_event_eth_tx_adapter.o
CC virtio_net.o
CC vdpa.o
CC bpf.o
CC bpf_exec.o
CC bpf_load.o
CC bpf_pkt.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
CC bpf_validate.o
CC bpf_jit_x86.o
CC vhost_crypto.o
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_rawdev.a
AR librte_gro.a
INSTALL-LIB librte_rawdev.a
INSTALL-LIB librte_gro.a
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_eventdev.a
AR librte_bpf.a
INSTALL-LIB librte_eventdev.a
INSTALL-LIB librte_bpf.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC octeontx_mbox.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC cpt_pmd_ops_helper.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_pci.h
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
SYMLINK-FILE include/rte_bus_vdev.h
CC linux/pci_vfio.o
CC linux/pci.o
CC pci_params.o
CC qbman/qbman_portal.o
CC linux/pci_uio.o
CC qbman/qbman_debug.o
CC vdev.o
CC mc/dpmng.o
CC vdev_params.o
CC mc/dpbp.o
CC mc/dpio.o
CC linux/vmbus_bus.o
CC pci_common.o
CC mc/mc_sys.o
CC vmbus_common.o
CC dpaa_bus.o
CC vmbus_channel.o
CC linux/vmbus_uio.o
CC pci_common_uio.o
CC mc/dpcon.o
CC vmbus_bufring.o
CC mc/dpci.o
CC base/fman/fman.o
CC mc/dpdmai.o
CC vmbus_common_uio.o
CC base/fman/of.o
CC base/fman/fman_hw.o
CC base/fman/netcfg_layer.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC base/qbman/process.o
CC portal/dpaa2_hw_dpci.o
CC base/qbman/bman.o
CC fslmc_vfio.o
CC fslmc_bus.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
Building modules, stage 2.
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
MODPOST 1 modules
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpci.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_stack.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC rte_mempool_bucket.o
CC dpaa_mempool.o
CC dpaa2_hw_mempool.o
CC rte_mempool_ring.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_octeontx2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/compress/octeontx
== Build drivers/baseband/null
== Build drivers/crypto/octeontx
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
== Build drivers/crypto/scheduler
== Build drivers/crypto/null
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/axgbe
== Build drivers/net/avp
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
CC qat_comp.o
== Build drivers/net/ena
== Build drivers/net/enic
CC qat_comp_pmd.o
== Build drivers/net/enetc
== Build drivers/net/failsafe
CC qat_device.o
== Build drivers/net/fm10k
== Build drivers/net/hinic
CC qat_common.o
== Build drivers/net/hns3
== Build drivers/net/i40e
CC qat_logs.o
CC qat_qp.o
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
CC otx_zip_pmd.o
SYMLINK-FILE include/fpga_lte_fec.h
CC bbdev_null.o
CC bbdev_turbo_software.o
CC virtqueue.o
CC otx_cryptodev.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC fpga_lte_fec.o
CC dpaa2_sec_dpseci.o
CC dpaa_sec.o
CC null_crypto_pmd.o
CC caam_jr.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC nitrox_device.o
CC atl_rxtx.o
CC rte_eth_af_packet.o
CC scheduler_pmd.o
SYMLINK-FILE include/rte_eth_bond.h
SYMLINK-FILE include/rte_avp_common.h
CC hinic_pmd_api_cmd.o
CC ark_ddm.o
CC axgbe_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa.h
SYMLINK-FILE include/rte_avp_fifo.h
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC hns3_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC failsafe.o
CC dpaa_ethdev.o
CC iavf_adminq.o
CC avp_ethdev.o
CC enetc_ethdev.o
CC ena_ethdev.o
CC rte_eth_bond_api.o
CC cxgbe_ethdev.o
CC base/dpaa2_hw_dpni.o
CC enic_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC fm10k_ethdev.o
CC e1000_80003es2lan.o
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ice.h
CC ice_controlq.o
CC ipn3ke_ethdev.o
CC ark_ethdev.o
CC fm10k_rxtx.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
PMDINFO otx_cryptodev.o.pmd.c
CC caam_jr_capabilities.o
CC otx_cryptodev.o.pmd.o
LD otx_cryptodev.o
CC otx_cryptodev_capabilities.o
CC otx_cryptodev_hw_access.o
CC e1000_82540.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD nitrox_device.o
CC nitrox_hal.o
CC e1000_82541.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC nitrox_logs.o
CC otx_cryptodev_mbox.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
CC scheduler_pmd_ops.o
CC rte_cryptodev_scheduler.o
LD axgbe_ethdev.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC dpaa2_rxtx.o
LD failsafe.o
CC axgbe_dev.o
CC nitrox_sym.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC hinic_pmd_cfg.o
CC failsafe_args.o
LD bbdev_null.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC failsafe_eal.o
CC virtio_pci.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
CC virtio_rxtx.o
CC e1000_82542.o
LD otx_zip_pmd.o
CC e1000_82543.o
LD ipn3ke_ethdev.o
CC otx_zip.o
CC ipn3ke_representor.o
CC ipn3ke_tm.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD bbdev_turbo_software.o
LD enic_ethdev.o
LD ark_ethdev.o
AR librte_pmd_bbdev_turbo_sw.a
CC rte_eth_bond_pmd.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
PMDINFO dpaa_ethdev.o.pmd.c
CC enic_main.o
CC dpaa_ethdev.o.pmd.o
CC rte_eth_bond_args.o
LD dpaa_ethdev.o
CC ark_ethdev_rx.o
CC dpaa_rxtx.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
LD enetc_ethdev.o
CC enetc_rxtx.o
CC axgbe_mdio.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD fpga_lte_fec.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC dpaa2_ethdev.o
CC atl_ethdev.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
CC otx_cryptodev_ops.o
CC hinic_pmd_cmdq.o
CC e1000_82571.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC scheduler_roundrobin.o
CC scheduler_pkt_size_distr.o
CC scheduler_failover.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC scheduler_multicore.o
CC hinic_pmd_eqs.o
CC failsafe_ops.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
== Build drivers/net/ixgbe
LD cxgbe_ethdev.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC nitrox_sym_capabilities.o
== Build drivers/net/liquidio
CC cxgbevf_ethdev.o
CC e1000_82575.o
CC e1000_i210.o
CC iavf_common.o
CC hinic_pmd_hwdev.o
CC axgbe_phy_impl.o
CC lio_ethdev.o
CC lio_rxtx.o
CC i40e_common.o
AR librte_pmd_enetc.a
SYMLINK-FILE include/rte_pmd_ixgbe.h
INSTALL-LIB librte_pmd_enetc.a
CC ixgbe_common.o
CC i40e_diag.o
CC ipn3ke_flow.o
CC hinic_pmd_hwif.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC rte_eth_bond_8023ad.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD fm10k_ethdev.o
LD hns3_ethdev.o
CC rte_eth_bond_alb.o
CC nitrox_sym_reqmgr.o
CC hns3_ethdev_vf.o
CC fm10k_pf.o
CC virtio_cryptodev.o
CC atl_hw_regs.o
CC e1000_api.o
CC ice_common.o
CC ark_ethdev_tx.o
CC ark_mpu.o
CC ark_pktchkr.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
CC ark_pktdir.o
CC cxgbe_main.o
LD atl_ethdev.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC hw_atl_utils.o
CC hw_atl_llh.o
CC hw_atl_utils_fw2x.o
CC hw_atl_b0.o
CC ena_com.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC e1000_ich8lan.o
CC e1000_logs.o
CC e1000_mac.o
CC dpaa2_flow.o
CC dpaa2_mux.o
CC enic_rxtx.o
CC ixgbe_82598.o
CC ixgbe_82599.o
CC nitrox_qp.o
CC iavf_ethdev.o
CC fm10k_tlv.o
CC rte_pmd_atlantic.o
CC hinic_pmd_mgmt.o
CC axgbe_i2c.o
CC axgbe_rxtx.o
CC dpaa2_sparser.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC hns3_cmd.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC hns3_mbx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
LD lio_ethdev.o
CC hinic_pmd_wq.o
CC hinic_pmd_ethdev.o
CC fm10k_common.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC fm10k_mbx.o
CC ena_eth_com.o
CC fm10k_vf.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
CC fm10k_api.o
LD dpaa2_mux.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC fm10k_rxtx_vec.o
CC hinic_pmd_rx.o
CC hinic_pmd_tx.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC ark_pktgen.o
CC ark_rqp.o
CC ixgbe_x540.o
CC enic_clsf.o
CC mc/dpni.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
CC axgbe_rxtx_vec_sse.o
LD avp_ethdev.o
CC mc/dpkg.o
CC mc/dpdmux.o
AR librte_pmd_avp.a
== Build drivers/net/memif
CC ice_sched.o
INSTALL-LIB librte_pmd_avp.a
CC ark_udm.o
CC cxgbevf_main.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC sge.o
CC cxgbe_filter.o
AR librte_pmd_ena.a
CC ixgbe_x550.o
INSTALL-LIB librte_pmd_ena.a
== Build drivers/net/netvsc
CC hns3_rxtx.o
CC hns3_rss.o
CC cxgbe_flow.o
CC t4_hw.o
CC e1000_manage.o
CC ice_switch.o
CC lio_23xx_vf.o
CC rte_eth_bond_flow.o
CC rte_eth_memif.o
CC memif_socket.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD rte_eth_bond_pmd.o
LD caam_jr.o
CC caam_jr_hw.o
CC failsafe_rxtx.o
CC hn_ethdev.o
CC caam_jr_uio.o
CC e1000_mbx.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
== Build drivers/net/nfp
== Build drivers/net/bnxt
== Build drivers/net/null
CC hn_rxtx.o
== Build drivers/net/octeontx
CC e1000_nvm.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC hn_rndis.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
CC hn_nvs.o
CC nfp_cppcore.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC enic_res.o
CC rte_eth_null.o
CC i40e_hmc.o
CC enic_flow.o
CC clip_tbl.o
CC octeontx_rxtx.o
CC lio_mbox.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC octeontx_pkovf.o
CC iavf_vchnl.o
CC i40e_lan_hmc.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC iavf_rxtx.o
CC e1000_osdep.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC e1000_phy.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
CC iavf_rxtx_vec_sse.o
CC e1000_vf.o
LD octeontx_pkovf.o
CC igb_ethdev.o
CC octeontx_pkivf.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC igb_rxtx.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC ixgbe_phy.o
LD octeontx_pkivf.o
CC ixgbe_api.o
CC ixgbe_vf.o
CC ixgbe_hv_vf.o
CC ixgbe_dcb.o
CC ixgbe_dcb_82599.o
CC base/vnic_cq.o
CC bnxt_ethdev.o
CC ixgbe_dcb_82598.o
CC bnxt_filter.o
CC ice_nvm.o
CC octeontx_bgx.o
CC ice_flex_pipe.o
CC ice_flow.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
CC ice_dcb.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC ice_fdir.o
CC octeontx_ethdev.o
CC ice_ethdev.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC ice_rxtx.o
LD iavf_ethdev.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
CC ixgbe_mbx.o
CC ice_rxtx_vec_avx2.o
CC bnxt_flow.o
CC nfp_cpp_pcie_ops.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
CC mc/dpseci.o
CC hns3_flow.o
CC base/vnic_wq.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC base/vnic_dev.o
CC base/vnic_intr.o
CC base/vnic_rq.o
CC ixgbe_rxtx.o
CC ixgbe_ethdev.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC i40e_nvm.o
CC i40e_dcb.o
CC i40e_ethdev.o
CC i40e_rxtx.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
CC igb_pf.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC igb_flow.o
CC i40e_ethdev_vf.o
CC i40e_pf.o
CC i40e_fdir.o
CC i40e_flow.o
CC failsafe_ether.o
CC failsafe_flow.o
CC nfp_mutex.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
== Build drivers/net/octeontx2
== Build drivers/net/qede
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC mps_tcam.o
CC hns3_fdir.o
CC hns3_intr.o
CC bnxt_hwrm.o
CC otx2_rx.o
CC hn_vf.o
CC bnxt_ring.o
CC otx2_tx.o
CC ecore_dev.o
CC ecore_hw.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
AR librte_pmd_iavf.a
CC failsafe_intr.o
LD igb_ethdev.o
INSTALL-LIB librte_pmd_iavf.a
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC nfp_resource.o
CC nfp_crc.o
LD bnxt_ethdev.o
CC nfp_mip.o
CC nfp_nffw.o
CC nfp_hwinfo.o
CC em_ethdev.o
CC nfp_rtsym.o
CC em_rxtx.o
CC nfp_nsp.o
CC nfp_nsp_cmds.o
CC nfp_nsp_eth.o
CC enic_rxtx_vec_avx2.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
== Build drivers/net/ring
== Build drivers/net/sfc
== Build drivers/net/tap
CC hns3_stats.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC bnxt_rxq.o
CC bnxt_rxr.o
AR librte_pmd_failsafe.a
CC bnxt_stats.o
CC nfp_net.o
CC rte_pmd_i40e.o
INSTALL-LIB librte_pmd_failsafe.a
CC hns3_regs.o
CC hns3_dcb.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC hns3_mp.o
CC bnxt_txq.o
CC sfc_ethdev.o
CC sfc_kvargs.o
CC bnxt_txr.o
CC rte_eth_tap.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
CC tap_flow.o
LD em_ethdev.o
CC i40e_tm.o
CC tap_netlink.o
CC l2t.o
CC t4vf_hw.o
CC ixgbe_fdir.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
CC ixgbe_pf.o
CC ixgbe_flow.o
CC ixgbe_rxtx_vec_sse.o
CC ice_generic_flow.o
CC ixgbe_ipsec.o
CC tap_tcmsgs.o
CC bnxt_vnic.o
== Build drivers/net/thunderx
== Build drivers/net/vdev_netvsc
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC tap_bpf_api.o
CC tap_intr.o
== Build drivers/net/virtio
CC bnxt_irq.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_ring.a
INSTALL-LIB librte_pmd_e1000.a
CC nicvf_rxtx.o
== Build drivers/net/vmxnet3
CC sfc.o
CC rte_pmd_ixgbe.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC ixgbe_tm.o
CC i40e_vf_representor.o
CC vdev_netvsc.o
CC ecore_cxt.o
CC ecore_l2.o
CC ecore_sp_commands.o
CC virtqueue.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC virtio_pci.o
CC vmxnet3_rxtx.o
CC ixgbe_vf_representor.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC sfc_mcdi.o
CC ecore_init_fw_funcs.o
CC nicvf_hw.o
CC nicvf_mbox.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC nicvf_ethdev.o
CC nicvf_bsvf.o
CC nicvf_svf.o
== Build drivers/net/kni
== Build drivers/net/softnic
== Build drivers/net/vhost
== Build drivers/net/ifc
CC virtio_rxtx.o
CC sfc_intr.o
CC rte_eth_kni.o
SYMLINK-FILE include/rte_eth_softnic.h
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_softnic.o
CC rte_eth_vhost.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC rte_eth_softnic_mempool.o
CC ifcvf_vdpa.o
LD sfc_ethdev.o
CC ecore_spq.o
CC sfc_ev.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC virtio_ethdev.o
CC virtio_rxtx_simple.o
CC virtio_rxtx_simple_sse.o
CC ecore_init_ops.o
LD nfp_net.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
AR librte_pmd_ice.a
AR librte_pmd_nfp.a
CC sfc_port.o
INSTALL-LIB librte_pmd_nfp.a
INSTALL-LIB librte_pmd_ice.a
CC sfc_rx.o
LD vdev_netvsc.o
CC sfc_tx.o
CC ifcvf.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC virtio_user/vhost_user.o
CC ecore_mcp.o
CC otx2_tm.o
CC otx2_rss.o
CC otx2_mac.o
CC otx2_ptp.o
CC otx2_flow.o
CC sfc_tso.o
CC sfc_filter.o
CC sfc_flow.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC otx2_link.o
LD rte_eth_kni.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC bnxt_rxtx_vec_sse.o
CC vmxnet3_ethdev.o
CC rte_eth_softnic_swq.o
CC virtio_user/vhost_kernel.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
CC ecore_int.o
CC rte_eth_softnic_tap.o
CC ecore_dcbx.o
CC sfc_dp.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
AR librte_pmd_thunderx_nicvf.a
CC rte_eth_softnic_action.o
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC rte_eth_softnic_pipeline.o
CC sfc_ef10_rx.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
CC bcm_osal.o
LD ifcvf_vdpa.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC rte_eth_softnic_thread.o
CC otx2_vlan.o
CC otx2_stats.o
CC otx2_lookup.o
CC ecore_sriov.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC efx_bootcfg.o
LD rte_eth_vhost.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC rte_eth_softnic_cli.o
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
CC qede_rxtx.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC efx_crc32.o
CC efx_ev.o
CC efx_evb.o
CC efx_filter.o
CC efx_hash.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC efx_intr.o
CC efx_lic.o
CC qede_filter.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC efx_mac.o
PMDINFO i40e_ethdev.o.pmd.c
LD vmxnet3_ethdev.o
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
CC efx_mcdi.o
CC efx_mon.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
CC efx_nic.o
LD virtio_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC efx_nvram.o
CC efx_phy.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
CC otx2_flow_parse.o
INSTALL-LIB librte_pmd_tap.a
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC efx_port.o
CC efx_proxy.o
CC otx2_ethdev_debug.o
CC efx_rx.o
CC otx2_ethdev_devargs.o
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC efx_sram.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC parser.o
CC conn.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC siena_phy.o
CC siena_sram.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC siena_vpd.o
LD virtio_user_ethdev.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
CC medford2_nic.o
LD qede_ethdev.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx2
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dpaa_eventdev.o
CC skeleton_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC sw_evdev_selftest.o
CC otx2_tim_worker.o
CC opdl_ring.o
CC otx2_evdev.o
CC opdl_evdev.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC opdl_evdev_init.o
CC otx2_evdev_irq.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
CC opdl_evdev_xstats.o
CC opdl_test.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD dpaa2_hw_dpcon.o
LD ssovf_evdev.o
LD timvf_probe.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC skeleton_rawdev.o
CC ioat_rawdev_test.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ntb.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
PMDINFO skeleton_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
LD ifpga_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/pdump
== Build app/test-cmdline
== Build app/test-acl
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC cperf_ops.o
CC main.o
CC main.o
CC test_bbdev.o
CC test_bbdev_perf.o
CC main.o
CC comp_perf_options_parse.o
CC cperf_options_parsing.o
CC cperf_test_vectors.o
CC comp_perf_test_verify.o
CC cperf_test_throughput.o
CC cmdline_test.o
CC commands.o
CC cperf_test_latency.o
CC main.o
CC config.o
CC init.o
CC test_bbdev_vector.o
CC cperf_test_pmd_cyclecount.o
CC evt_main.o
CC runtime.o
CC evt_options.o
CC comp_perf_test_benchmark.o
CC pipeline_stub.o
CC cperf_test_verify.o
CC main.o
CC comp_perf_test_common.o
CC evt_test.o
CC parser.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC test_order_common.o
CC cperf_test_vector_parsing.o
CC testpmd.o
CC cperf_test_common.o
CC parameters.o
CC cmdline.o
LD cmdline_test
CC commands.o
CC test.o
CC resource.o
CC test_order_queue.o
CC test_order_atq.o
LD testacl
CC pipeline_lpm_ipv6.o
CC test_perf_common.o
CC pipeline_acl.o
CC test_perf_queue.o
CC cmdline_flow.o
CC test_resource.o
CC cmdline_mtr.o
LD dpdk-procinfo
CC test_prefetch.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
CC test_barrier.o
CC cmdline_tm.o
CC config.o
CC iofwd.o
CC macfwd.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
LD dpdk-pdump
CC csumonly.o
CC icmpecho.o
LD testpipeline
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC noisy_vnf.o
CC test_malloc.o
CC test_cycles.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC bpf_cmd.o
CC util.o
CC softnicfwd.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
LD dpdk-test-eventdev
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
LD dpdk-test-crypto-perf
CC test_lpm6_perf.o
INSTALL-APP dpdk-test-eventdev
CC test_debug.o
CC test_errno.o
INSTALL-MAP dpdk-test-eventdev.map
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
LD dpdk-test-compress-perf
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 08:06:34 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 08:06:47 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:06:47 dut.10.240.176.196: set fwd rxonly
17/10/2019 08:06:47 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 08:06:47 dut.10.240.176.196: set verbose 1
17/10/2019 08:06:47 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 08:06:47 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:06:47 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:06:52 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:06:52 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:06:57 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:06:57 dut.10.240.176.196: start
17/10/2019 08:06:57 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:06:57 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270817.8 root@10.240.176.173:/tmp/tester/
17/10/2019 08:06:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270817.8 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:00 tester: python /tmp/tester/scapy_ens160f0.cmd1571270817.8
17/10/2019 08:07:01 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:07:03 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=80 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:07:03 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP]
17/10/2019 08:07:03 dut.10.240.176.196: start
17/10/2019 08:07:03 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:07:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270823.51 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270823.51 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:06 tester: python /tmp/tester/scapy_ens160f0.cmd1571270823.51
17/10/2019 08:07:06 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:07:08 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=130 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:07:08 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP]
17/10/2019 08:07:08 dut.10.240.176.196: start
17/10/2019 08:07:09 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:07:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270829.08 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:10 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270829.08 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:11 tester: python /tmp/tester/scapy_ens160f0.cmd1571270829.08
17/10/2019 08:07:12 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=9159)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:07:14 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:07:14 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = SCTP]
17/10/2019 08:07:14 dut.10.240.176.196: start
17/10/2019 08:07:14 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:07:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571270834.68 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:16 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571270834.68 root@10.240.176.173:/tmp/tester/
17/10/2019 08:07:17 tester: python /tmp/tester/scapy_ens160f0.cmd1571270834.68
17/10/2019 08:07:18 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=94, fl=0, tc=0)/UDP(dport=4789, sport=63, len=94, chksum=38949)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 08:07:20 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=148 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:07:20 dut.10.240.176.196: stop
17/10/2019 08:07:20 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 4 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:07:20 dut.10.240.176.196: quit
17/10/2019 08:07:23 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:07:23 dut.10.240.176.196: cat config/common_base
17/10/2019 08:07:23 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 08:07:23 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 08:07:24 dut.10.240.176.196:
17/10/2019 08:07:24 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 08:09:26 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_log.o
CC eal_thread.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_vfio.o
CC eal_lcore.o
CC eal_debug.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_lcore.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_cfgfile
== Build lib/librte_timer
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_pci.h
CC rte_stack.o
CC rte_stack_std.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
CC rte_pci.o
CC rte_cfgfile.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_metrics.h
CC rte_timer.o
CC rte_metrics.o
CC rte_ring.o
SYMLINK-FILE include/rte_meter.h
CC rte_meter.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_jobstats.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_hash
== Build lib/librte_mempool
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
CC rte_mempool_ops_default.o
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_approx.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
CC rte_sched.o
SYMLINK-FILE include/rte_dev_info.h
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
CC ethdev_private.o
SYMLINK-FILE include/cmdline_parse_string.h
CC rte_ethdev.o
CC rte_class_eth.o
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
CC rte_flow.o
SYMLINK-FILE include/cmdline_socket.h
CC rte_tm.o
CC rte_mtr.o
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC ethdev_profile.o
CC cmdline.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_pdump.h
CC rte_security.o
CC rte_pdump.o
SYMLINK-FILE include/rte_bitrate.h
CC rte_bitrate.o
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
CC rte_gso.o
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_rawdev.o
CC gso_common.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC gso_tunnel_tcp4.o
CC rte_gro.o
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_ip_frag.h
CC gro_tcp4.o
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_latencystats.h
CC gro_vxlan_tcp4.o
CC rte_ipv4_fragmentation.o
SYMLINK-FILE include/rte_kni.h
CC gso_udp4.o
CC rte_distributor_v20.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_event_timer_adapter.h
CC rte_distributor.o
CC rte_latencystats.o
CC rte_kni.o
CC rte_ipv6_fragmentation.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC fd_man.o
CC iotlb.o
CC rte_ipv4_reassembly.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC socket.o
CC rte_ipv6_reassembly.o
CC vhost.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC vhost_user.o
CC virtio_net.o
CC bpf.o
CC rte_ip_frag_common.o
CC ip_frag_internal.o
CC vdpa.o
CC rte_eventdev.o
CC vhost_crypto.o
CC rte_event_ring.o
CC bpf_exec.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC bpf_load.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
CC bpf_pkt.o
CC bpf_validate.o
CC bpf_jit_x86.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC octeontx_mbox.o
SYMLINK-FILE include/dpaax_iova_table.h
CC otx2_dev.o
CC otx2_irq.o
CC cpt_pmd_ops_helper.o
CC dpaax_iova_table.o
CC otx2_mbox.o
CC otx2_common.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_ifpga.h
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_bus_vdev.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC vdev.o
CC ifpga_bus.o
CC ifpga_common.o
CC vdev_params.o
SYMLINK-FILE include/rte_bus_pci.h
CC linux/vmbus_bus.o
CC vmbus_common.o
CC linux/vmbus_uio.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC linux/pci.o
CC vmbus_common_uio.o
CC linux/pci_uio.o
CC linux/pci_vfio.o
CC pci_params.o
CC pci_common.o
CC dpaa_bus.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC pci_common_uio.o
CC base/fman/of.o
CC base/fman/netcfg_layer.o
CC base/qbman/process.o
CC qbman/qbman_portal.o
CC base/qbman/bman.o
CC qbman/qbman_debug.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC mc/dpmng.o
CC base/qbman/qman_driver.o
CC mc/dpio.o
CC mc/dpbp.o
CC mc/mc_sys.o
CC base/qbman/dpaa_alloc.o
CC mc/dpcon.o
CC base/qbman/dpaa_sys.o
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
Building modules, stage 2.
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vdev.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
LD portal/dpaa2_hw_dpbp.o
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpci.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC rte_mempool_stack.o
CC rte_mempool_ring.o
CC dpaa_mempool.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC rte_mempool_bucket.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/crypto/octeontx
== Build drivers/crypto/scheduler
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/cxgbe
== Build drivers/net/bonding
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/ena
CC qat_comp.o
== Build drivers/compress/octeontx
CC qat_comp_pmd.o
CC qat_device.o
== Build drivers/baseband/null
== Build drivers/baseband/turbo_sw
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/baseband/fpga_lte_fec
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hns3
== Build drivers/net/hinic
CC qat_common.o
CC qat_logs.o
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC dpaa_sec.o
CC virtqueue.o
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_eth_bond.h
CC enetc_ethdev.o
CC caam_jr.o
CC failsafe.o
CC nitrox_device.o
CC rte_eth_af_packet.o
CC axgbe_ethdev.o
CC atl_rxtx.o
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_avp_common.h
CC ark_ddm.o
CC bbdev_turbo_software.o
SYMLINK-FILE include/fpga_lte_fec.h
SYMLINK-FILE include/rte_pmd_dpaa.h
CC hinic_pmd_api_cmd.o
CC otx_cryptodev.o
CC bbdev_null.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC ena_ethdev.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC hns3_ethdev.o
CC iavf_adminq.o
CC fpga_lte_fec.o
CC dpaa_ethdev.o
CC dpaa2_sec_dpseci.o
CC scheduler_pmd.o
CC ipn3ke_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC rte_eth_bond_api.o
SYMLINK-FILE include/rte_avp_fifo.h
CC enic_ethdev.o
CC avp_ethdev.o
CC base/dpaa2_hw_dpni.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_ice.h
CC cxgbe_ethdev.o
CC i40e_adminq.o
CC ice_controlq.o
CC e1000_80003es2lan.o
CC ark_ethdev.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ixgbe_82598.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC ixgbe_82599.o
CC ixgbe_x540.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD otx_cryptodev.o
CC otx_cryptodev_capabilities.o
CC e1000_82540.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD nitrox_device.o
CC nitrox_hal.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC qat_qp.o
LD failsafe.o
CC failsafe_args.o
CC scheduler_pmd_ops.o
CC caam_jr_capabilities.o
CC e1000_82541.o
CC hinic_pmd_cfg.o
CC dpaa2_rxtx.o
CC nitrox_logs.o
CC ark_ethdev_rx.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD null_crypto_pmd.o
LD axgbe_ethdev.o
LD ark_ethdev.o
PMDINFO bbdev_null.o.pmd.c
CC null_crypto_pmd_ops.o
CC bbdev_null.o.pmd.o
CC axgbe_dev.o
CC axgbe_mdio.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD bbdev_null.o
LD ipn3ke_ethdev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC caam_jr_hw.o
CC virtio_pci.o
CC ipn3ke_representor.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
CC otx_cryptodev_hw_access.o
PMDINFO enic_ethdev.o.pmd.c
LD otx_zip_pmd.o
CC enic_ethdev.o.pmd.o
LD enic_ethdev.o
CC otx_zip.o
CC e1000_82542.o
CC rte_eth_bond_pmd.o
CC enic_main.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
LD bbdev_turbo_software.o
CC rte_eth_bond_args.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
AR librte_pmd_bbdev_turbo_sw.a
LD dpaa_ethdev.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC ixgbe_x550.o
CC dpaa_rxtx.o
LD enetc_ethdev.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC enetc_rxtx.o
LD fpga_lte_fec.o
CC ixgbe_phy.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC failsafe_eal.o
CC e1000_82543.o
AR librte_pmd_qat.a
CC hinic_pmd_cmdq.o
INSTALL-LIB librte_pmd_qat.a
CC rte_cryptodev_scheduler.o
CC hinic_pmd_eqs.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
CC atl_ethdev.o
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_hwdev.o
CC hinic_pmd_hwif.o
CC virtio_rxtx.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC iavf_common.o
CC failsafe_ops.o
CC atl_hw_regs.o
CC otx_cryptodev_mbox.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC i40e_common.o
CC e1000_82571.o
CC hw_atl_utils.o
CC hw_atl_llh.o
CC axgbe_phy_impl.o
CC axgbe_i2c.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
CC iavf_ethdev.o
CC ark_ethdev_tx.o
CC e1000_82575.o
CC ice_common.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC ice_sched.o
CC failsafe_rxtx.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC failsafe_ether.o
LD hns3_ethdev.o
CC hinic_pmd_wq.o
CC fm10k_rxtx.o
CC hns3_ethdev_vf.o
CC hw_atl_utils_fw2x.o
CC otx_cryptodev_ops.o
CC ipn3ke_tm.o
CC ixgbe_api.o
CC ixgbe_vf.o
CC hw_atl_b0.o
CC rte_pmd_atlantic.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC hinic_pmd_ethdev.o
CC cxgbe_main.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
CC hinic_pmd_rx.o
LD ena_ethdev.o
CC virtio_cryptodev.o
CC ena_com.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC hinic_pmd_tx.o
CC cxgbevf_main.o
CC iavf_vchnl.o
CC iavf_rxtx.o
CC ena_eth_com.o
CC iavf_rxtx_vec_sse.o
CC ixgbe_hv_vf.o
CC ipn3ke_flow.o
CC axgbe_rxtx.o
CC enic_rxtx.o
CC e1000_i210.o
CC ixgbe_dcb.o
CC ark_mpu.o
CC axgbe_rxtx_vec_sse.o
CC hns3_cmd.o
AR librte_pmd_atlantic.a
CC dpaa2_ethdev.o
INSTALL-LIB librte_pmd_atlantic.a
CC ark_pktchkr.o
CC ark_pktdir.o
CC dpaa2_flow.o
CC scheduler_roundrobin.o
CC e1000_api.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC e1000_ich8lan.o
CC e1000_logs.o
CC sge.o
== Build drivers/net/liquidio
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC dpaa2_mux.o
== Build drivers/net/memif
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
CC ixgbe_dcb_82599.o
CC ixgbe_dcb_82598.o
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC scheduler_pkt_size_distr.o
CC lio_ethdev.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC scheduler_failover.o
CC scheduler_multicore.o
CC rte_eth_bond_8023ad.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC ice_switch.o
LD hinic_pmd_ethdev.o
CC ice_nvm.o
CC hns3_mbx.o
CC rte_eth_memif.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC memif_socket.o
CC failsafe_flow.o
CC caam_jr_uio.o
CC failsafe_intr.o
CC ixgbe_mbx.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC ark_pktgen.o
CC ark_rqp.o
CC ark_udm.o
CC i40e_diag.o
== Build drivers/net/netvsc
CC ixgbe_rxtx.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC i40e_hmc.o
CC i40e_lan_hmc.o
CC fm10k_pf.o
CC fm10k_tlv.o
CC hn_ethdev.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
CC fm10k_common.o
CC hn_rxtx.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC hn_rndis.o
CC lio_rxtx.o
CC hn_nvs.o
AR librte_pmd_axgbe.a
CC hns3_rxtx.o
INSTALL-LIB librte_pmd_axgbe.a
CC hns3_rss.o
== Build drivers/net/nfp
CC hns3_flow.o
CC hn_vf.o
CC ixgbe_ethdev.o
CC fm10k_mbx.o
CC e1000_mac.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC e1000_manage.o
CC e1000_mbx.o
CC dpaa2_sparser.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC mc/dpni.o
CC nfp_cppcore.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
== Build drivers/net/bnxt
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
LD lio_ethdev.o
CC mc/dpkg.o
== Build drivers/net/null
CC rte_eth_bond_alb.o
CC i40e_nvm.o
CC i40e_dcb.o
CC lio_23xx_vf.o
CC i40e_ethdev.o
CC i40e_rxtx.o
CC fm10k_vf.o
CC enic_clsf.o
CC fm10k_api.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC rte_eth_null.o
CC e1000_nvm.o
AR librte_pmd_iavf.a
PMDINFO hn_ethdev.o.pmd.c
INSTALL-LIB librte_pmd_iavf.a
CC hn_ethdev.o.pmd.o
CC fm10k_rxtx_vec.o
== Build drivers/net/octeontx
LD hn_ethdev.o
== Build drivers/net/octeontx2
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
CC hns3_fdir.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
AR librte_pmd_dpaa_sec.a
== Build drivers/net/qede
INSTALL-LIB librte_pmd_dpaa_sec.a
CC hns3_intr.o
CC mc/dpdmux.o
CC nitrox_sym.o
== Build drivers/net/ring
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC e1000_osdep.o
CC hns3_stats.o
CC rte_eth_bond_flow.o
CC cxgbe_filter.o
CC nitrox_sym_capabilities.o
CC nitrox_sym_reqmgr.o
CC octeontx_rxtx.o
CC nitrox_qp.o
CC otx2_rx.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC hns3_regs.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC ice_flex_pipe.o
SYMLINK-FILE include/rte_eth_ring.h
AR librte_pmd_dpaa2.a
LD dpaa2_sec_dpseci.o
CC rte_eth_ring.o
INSTALL-LIB librte_pmd_dpaa2.a
CC otx2_tx.o
CC e1000_phy.o
CC mc/dpseci.o
CC ecore_dev.o
CC e1000_vf.o
CC igb_ethdev.o
CC bnxt_ethdev.o
CC nfp_cpp_pcie_ops.o
AR librte_pmd_dpaa2_sec.a
CC enic_res.o
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC enic_flow.o
CC base/vnic_cq.o
CC ecore_hw.o
CC ecore_cxt.o
CC nfp_mutex.o
AR librte_pmd_bond.a
CC octeontx_pkovf.o
INSTALL-LIB librte_pmd_bond.a
CC bnxt_filter.o
CC bnxt_flow.o
CC bnxt_hwrm.o
CC bnxt_ring.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC octeontx_pkivf.o
CC octeontx_bgx.o
CC ecore_l2.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
AR librte_pmd_nitrox.a
CC lio_mbox.o
INSTALL-LIB librte_pmd_nitrox.a
CC ecore_sp_commands.o
LD octeontx_pkivf.o
CC otx2_tm.o
CC hns3_dcb.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
CC octeontx_ethdev.o
LD rte_eth_ring.o
CC bnxt_rxq.o
CC igb_rxtx.o
CC base/vnic_wq.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC base/vnic_dev.o
CC cxgbe_flow.o
CC base/vnic_intr.o
== Build drivers/net/sfc
== Build drivers/net/tap
CC nfp_resource.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC nfp_crc.o
CC t4_hw.o
CC sfc_ethdev.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
AR librte_pmd_lio.a
CC base/vnic_rq.o
CC sfc_kvargs.o
CC nfp_mip.o
INSTALL-LIB librte_pmd_lio.a
CC enic_rxtx_vec_avx2.o
LD octeontx_ethdev.o
CC clip_tbl.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC bnxt_rxr.o
== Build drivers/net/thunderx
AR librte_pmd_null.a
CC ice_flow.o
INSTALL-LIB librte_pmd_null.a
CC ice_dcb.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC ice_fdir.o
CC nicvf_rxtx.o
CC mps_tcam.o
CC rte_eth_tap.o
CC ecore_init_fw_funcs.o
AR librte_pmd_failsafe.a
PMDINFO igb_ethdev.o.pmd.c
INSTALL-LIB librte_pmd_failsafe.a
CC igb_ethdev.o.pmd.o
CC ecore_spq.o
LD igb_ethdev.o
CC ecore_init_ops.o
CC tap_flow.o
CC igb_pf.o
CC tap_netlink.o
CC nfp_nffw.o
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
CC i40e_rxtx_vec_sse.o
PMDINFO bnxt_ethdev.o.pmd.c
CC sfc.o
CC ecore_mcp.o
CC l2t.o
CC bnxt_ethdev.o.pmd.o
CC i40e_ethdev_vf.o
CC vdev_netvsc.o
LD bnxt_ethdev.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC i40e_pf.o
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC igb_flow.o
CC virtqueue.o
CC ixgbe_fdir.o
CC em_ethdev.o
CC ixgbe_pf.o
CC ixgbe_flow.o
CC ixgbe_rxtx_vec_sse.o
CC hns3_mp.o
CC i40e_fdir.o
CC nfp_hwinfo.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC ecore_int.o
CC em_rxtx.o
LD sfc_ethdev.o
CC tap_tcmsgs.o
CC nicvf_hw.o
CC tap_bpf_api.o
CC tap_intr.o
CC sfc_mcdi.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
== Build drivers/net/vmxnet3
== Build drivers/net/kni
== Build drivers/net/softnic
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
CC sfc_intr.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC nfp_rtsym.o
CC vmxnet3_rxtx.o
CC nfp_nsp.o
CC rte_eth_kni.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC ecore_dcbx.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
== Build drivers/net/vhost
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
== Build drivers/net/ifc
LD em_ethdev.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
CC vmxnet3_ethdev.o
CC nfp_nsp_cmds.o
CC nfp_nsp_eth.o
CC nicvf_mbox.o
CC nicvf_ethdev.o
CC ixgbe_ipsec.o
CC nicvf_bsvf.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC nicvf_svf.o
CC rte_pmd_ixgbe.o
CC t4vf_hw.o
CC ice_ethdev.o
CC virtio_pci.o
CC virtio_rxtx.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC virtio_ethdev.o
CC ifcvf_vdpa.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC virtio_rxtx_simple.o
CC ice_rxtx.o
CC rte_eth_softnic_link.o
CC sfc_ev.o
CC rte_eth_softnic_tm.o
CC rte_eth_softnic_tap.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
LD rte_eth_kni.o
CC nfp_net.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC rte_eth_softnic_action.o
CC rte_eth_softnic_pipeline.o
CC virtio_rxtx_simple_sse.o
CC otx2_rss.o
CC otx2_mac.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC sfc_port.o
CC bnxt_stats.o
CC bnxt_txq.o
CC bnxt_txr.o
CC bcm_osal.o
CC ecore_sriov.o
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
AR librte_pmd_e1000.a
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_e1000.a
CC rte_eth_softnic_thread.o
LD vmxnet3_ethdev.o
CC rte_eth_softnic_cli.o
CC ixgbe_tm.o
CC ixgbe_vf_representor.o
CC sfc_rx.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC qede_rxtx.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
CC virtio_user/vhost_user.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC ifcvf.o
LD i40e_ethdev.o
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
CC i40e_flow.o
CC virtio_user/virtio_user_dev.o
CC rte_pmd_i40e.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
CC sfc_tx.o
AR librte_pmd_thunderx_nicvf.a
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC sfc_tso.o
INSTALL-LIB librte_pmd_ifc.a
CC sfc_filter.o
CC sfc_flow.o
CC sfc_dp.o
CC rte_eth_softnic_flow.o
CC qede_filter.o
CC rte_eth_softnic_meter.o
CC i40e_tm.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC i40e_vf_representor.o
LD rte_eth_vhost.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC bnxt_vnic.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC bnxt_irq.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC otx2_ptp.o
CC virtio_user_ethdev.o
CC otx2_flow.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC otx2_link.o
AR librte_pmd_ixgbe.a
CC rte_eth_softnic_cryptodev.o
INSTALL-LIB librte_pmd_ixgbe.a
CC parser.o
CC conn.o
CC otx2_vlan.o
CC otx2_stats.o
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
PMDINFO nfp_net.o.pmd.c
CC sfc_ef10_rx.o
CC nfp_net.o.pmd.o
CC sfc_ef10_essb_rx.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC i40e_rxtx_vec_avx2.o
CC sfc_ef10_tx.o
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC efx_bootcfg.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC efx_crc32.o
CC efx_ev.o
LD virtio_user_ethdev.o
CC otx2_ethdev_devargs.o
CC ice_rxtx_vec_sse.o
CC efx_evb.o
CC efx_filter.o
CC efx_hash.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC efx_intr.o
CC ice_switch_filter.o
CC efx_lic.o
CC efx_mac.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC efx_mcdi.o
CC efx_mon.o
CC efx_nic.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
AR librte_pmd_softnic.a
CC ef10_proxy.o
CC ef10_rx.o
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_bnxt.a
CC ef10_tx.o
CC ef10_vpd.o
INSTALL-LIB librte_pmd_bnxt.a
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC dpaa2_hw_dpcon.o
CC otx2_evdev_selftest.o
CC dpaa2_eventdev.o
CC otx2_evdev_irq.o
CC dpaa2_eventdev_selftest.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC skeleton_eventdev.o
CC dpaa_eventdev.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC opdl_ring.o
CC timvf_worker.o
CC opdl_evdev.o
CC timvf_evdev.o
CC opdl_evdev_init.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC opdl_evdev_xstats.o
CC sw_evdev_scheduler.o
CC timvf_probe.o
CC opdl_test.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD timvf_probe.o
LD ssovf_probe.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/octeontx2_dma
== Build drivers/raw/ntb
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC otx2_dpi_test.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC dpaa2_cmdif.o
CC ntb.o
CC ioat_rawdev.o
CC ntb_hw_intel.o
CC ioat_rawdev_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC opae_hw_api.o
CC ifpga_port_error.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/pdump
== Build app/proc-info
== Build app/test-acl
== Build app/test-cmdline
== Build app/test-bbdev
== Build app/test-pipeline
== Build app/test-crypto-perf
== Build app/test-compress-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC main.o
CC test_bbdev.o
CC cmdline_test.o
CC main.o
CC commands.o
CC test_bbdev_perf.o
CC test_bbdev_vector.o
CC evt_main.o
CC evt_options.o
CC main.o
CC config.o
CC evt_test.o
CC init.o
CC parser.o
CC runtime.o
CC test_order_common.o
CC pipeline_stub.o
CC test_order_queue.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC main.o
CC test_order_atq.o
CC test_perf_common.o
CC pipeline_acl.o
CC test_perf_queue.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC cperf_ops.o
CC test_pipeline_queue.o
CC main.o
CC test_pipeline_atq.o
CC cperf_options_parsing.o
CC cperf_test_vectors.o
CC testpmd.o
CC cperf_test_throughput.o
LD cmdline_test
CC cperf_test_latency.o
CC commands.o
CC test.o
CC resource.o
CC test_resource.o
CC cperf_test_pmd_cyclecount.o
CC cperf_test_verify.o
CC cperf_test_vector_parsing.o
LD testacl
CC test_prefetch.o
CC cperf_test_common.o
CC parameters.o
CC cmdline.o
CC cmdline_flow.o
CC comp_perf_options_parse.o
LD dpdk-procinfo
CC cmdline_mtr.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC cmdline_tm.o
CC comp_perf_test_common.o
CC test_byteorder.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC config.o
CC iofwd.o
CC macfwd.o
CC macswap.o
CC test_per_lcore.o
LD dpdk-pdump
CC flowgen.o
CC rxonly.o
CC txonly.o
LD testpipeline
CC csumonly.o
CC icmpecho.o
CC test_atomic.o
CC test_barrier.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
LD dpdk-test-eventdev
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
INSTALL-APP testacl
CC test_memory.o
CC noisy_vnf.o
CC bpf_cmd.o
CC util.o
INSTALL-MAP testacl.map
CC test_memzone.o
CC softnicfwd.o
CC test_bitmap.o
INSTALL-APP dpdk-pdump
CC test_reciprocal_division.o
INSTALL-MAP dpdk-pdump.map
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
INSTALL-APP testpipeline
CC test_rwlock.o
INSTALL-MAP testpipeline.map
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
INSTALL-APP dpdk-test-eventdev
CC test_memcpy_perf.o
INSTALL-MAP dpdk-test-eventdev.map
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
LD dpdk-test-crypto-perf
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD testpmd
LD dpdk-test-compress-perf
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 08:09:26 TestVxlan: Test Case test_vxlan_ipv6_detect Result PASSED:
17/10/2019 08:09:26 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:09:30 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:09:33 dts:
TEST SUITE ENDED: TestVxlan
17/10/2019 08:13:55 dts:
TEST SUITE : TestVxlan
17/10/2019 08:13:55 dts: NIC : fortville_eagle
17/10/2019 08:13:55 dut.10.240.176.196:
17/10/2019 08:13:55 tester:
17/10/2019 08:13:55 TestVxlan: Test Case test_tunnel_filter Begin
17/10/2019 08:13:55 dut.10.240.176.196:
17/10/2019 08:13:55 tester:
17/10/2019 08:13:55 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 08:14:10 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:14:10 dut.10.240.176.196: set fwd rxonly
17/10/2019 08:14:10 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 08:14:10 dut.10.240.176.196: set verbose 1
17/10/2019 08:14:10 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 08:14:10 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:14:11 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:14:16 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:14:16 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:14:21 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 08:14:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
17/10/2019 08:14:22 dut.10.240.176.196: start
17/10/2019 08:14:22 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:14:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271262.2 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271262.2 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:25 tester: python /tmp/tester/scapy_ens160f0.cmd1571271262.2
17/10/2019 08:14:25 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:14:27 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:14:27 dut.10.240.176.196: stop
17/10/2019 08:14:28 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:14:28 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 08:14:28 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
17/10/2019 08:14:28 dut.10.240.176.196: start
17/10/2019 08:14:28 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:14:28 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271268.39 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271268.39 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:31 tester: python /tmp/tester/scapy_ens160f0.cmd1571271268.39
17/10/2019 08:14:31 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:14:33 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:14:33 dut.10.240.176.196: stop
17/10/2019 08:14:34 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:14:34 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 08:14:34 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
17/10/2019 08:14:34 dut.10.240.176.196: start
17/10/2019 08:14:34 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:14:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271274.28 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:35 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271274.28 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:36 tester: python /tmp/tester/scapy_ens160f0.cmd1571271274.28
17/10/2019 08:14:37 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:14:39 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:14:39 dut.10.240.176.196: stop
17/10/2019 08:14:39 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:14:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 08:14:39 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
17/10/2019 08:14:39 dut.10.240.176.196: start
17/10/2019 08:14:40 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:14:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271280.14 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271280.14 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:42 tester: python /tmp/tester/scapy_ens160f0.cmd1571271280.14
17/10/2019 08:14:43 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:14:45 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:14:45 dut.10.240.176.196: stop
17/10/2019 08:14:45 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:14:45 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 08:14:45 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 08:14:45 dut.10.240.176.196: start
17/10/2019 08:14:45 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:14:45 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271285.99 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:47 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271285.99 root@10.240.176.173:/tmp/tester/
17/10/2019 08:14:48 tester: python /tmp/tester/scapy_ens160f0.cmd1571271285.99
17/10/2019 08:14:49 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:14:51 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:14:51 dut.10.240.176.196: stop
17/10/2019 08:14:51 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:14:51 dut.10.240.176.196: quit
17/10/2019 08:14:55 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:14:55 TestVxlan: Test Case test_tunnel_filter Result PASSED:
17/10/2019 08:14:55 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:14:58 TestVxlan: Test Case test_tunnel_filter_invalid Begin
17/10/2019 08:14:59 dut.10.240.176.196:
17/10/2019 08:14:59 tester:
17/10/2019 08:14:59 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 08:15:11 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:11 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:15:11 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:15:16 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:15:16 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:15:21 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
17/10/2019 08:15:22 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
17/10/2019 08:15:22 dut.10.240.176.196: stop
17/10/2019 08:15:22 dut.10.240.176.196: stop
Packet forwarding not started
17/10/2019 08:15:22 dut.10.240.176.196: quit
17/10/2019 08:15:26 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:15:26 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
17/10/2019 08:15:26 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:15:29 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
17/10/2019 08:15:29 dut.10.240.176.196:
17/10/2019 08:15:29 tester:
17/10/2019 08:15:29 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 08:15:41 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:41 dut.10.240.176.196: vlan set filter off 0
17/10/2019 08:15:41 dut.10.240.176.196: vlan set filter off 0
17/10/2019 08:15:41 dut.10.240.176.196: set fwd csum
17/10/2019 08:15:41 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 08:15:41 dut.10.240.176.196: port stop all
17/10/2019 08:15:42 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:15:42 dut.10.240.176.196: port stop all
17/10/2019 08:15:42 dut.10.240.176.196: port stop all
Stopping ports...
Done
17/10/2019 08:15:42 dut.10.240.176.196: csum set ip hw 1
17/10/2019 08:15:42 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:15:42 dut.10.240.176.196: port start all
17/10/2019 08:15:42 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:42 dut.10.240.176.196: port stop all
17/10/2019 08:15:42 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:15:42 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 08:15:43 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:15:43 dut.10.240.176.196: port start all
17/10/2019 08:15:43 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:43 dut.10.240.176.196: port stop all
17/10/2019 08:15:43 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:15:43 dut.10.240.176.196: csum set udp hw 1
17/10/2019 08:15:43 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:15:43 dut.10.240.176.196: port start all
17/10/2019 08:15:43 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:43 dut.10.240.176.196: port stop all
17/10/2019 08:15:44 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:15:44 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 08:15:44 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:15:44 dut.10.240.176.196: port start all
17/10/2019 08:15:44 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:44 dut.10.240.176.196: port stop all
17/10/2019 08:15:44 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:15:44 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 08:15:44 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:15:44 dut.10.240.176.196: port start all
17/10/2019 08:15:45 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:15:45 dut.10.240.176.196: port start all
17/10/2019 08:15:45 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
17/10/2019 08:15:45 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 08:15:45 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:15:45 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:15:45 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:15:50 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:15:50 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:15:56 TestVxlan: chksums_ref{}
17/10/2019 08:15:56 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
17/10/2019 08:15:56 dut.10.240.176.196: start
17/10/2019 08:15:56 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:15:56 tester: ls -d /tmp/tester/
17/10/2019 08:15:57 tester: /tmp/tester/
17/10/2019 08:15:57 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:15:57 tester:
17/10/2019 08:16:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271362.21 root@10.240.176.173:/tmp/tester/
17/10/2019 08:16:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271362.21 root@10.240.176.173:/tmp/tester/
17/10/2019 08:16:05 tester: python /tmp/tester/scapy_ens160f0.cmd1571271362.21
17/10/2019 08:16:05 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:16:15 TestVxlan: chksums{}
17/10/2019 08:16:15 dut.10.240.176.196: stop
17/10/2019 08:16:15 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:16:16 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:16:16 TestVxlan: vxlan packet [inner_ip_invalid = 1]
17/10/2019 08:16:16 dut.10.240.176.196: start
17/10/2019 08:16:16 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:16:16 tester: ls -d /tmp/tester/
17/10/2019 08:16:16 tester: /tmp/tester/
17/10/2019 08:16:16 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:16:17 tester:
17/10/2019 08:16:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271382.09 root@10.240.176.173:/tmp/tester/
17/10/2019 08:16:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271382.09 root@10.240.176.173:/tmp/tester/
17/10/2019 08:16:24 tester: python /tmp/tester/scapy_ens160f0.cmd1571271382.09
17/10/2019 08:16:25 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:16:35 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:16:35 dut.10.240.176.196: stop
17/10/2019 08:16:35 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:16:36 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:16:36 TestVxlan: vxlan packet [outer_ip_invalid = 1]
17/10/2019 08:16:36 dut.10.240.176.196: start
17/10/2019 08:16:36 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:16:36 tester: ls -d /tmp/tester/
17/10/2019 08:16:36 tester: /tmp/tester/
17/10/2019 08:16:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:16:36 tester:
17/10/2019 08:16:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271401.96 root@10.240.176.173:/tmp/tester/
17/10/2019 08:16:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271401.96 root@10.240.176.173:/tmp/tester/
17/10/2019 08:16:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571271401.96
17/10/2019 08:16:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:16:55 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:16:55 dut.10.240.176.196: stop
17/10/2019 08:16:55 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:16:56 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:16:56 TestVxlan: vxlan packet [inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 08:16:56 dut.10.240.176.196: start
17/10/2019 08:16:56 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:16:56 tester: ls -d /tmp/tester/
17/10/2019 08:16:56 tester: /tmp/tester/
17/10/2019 08:16:56 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:16:56 tester:
17/10/2019 08:17:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271421.83 root@10.240.176.173:/tmp/tester/
17/10/2019 08:17:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271421.83 root@10.240.176.173:/tmp/tester/
17/10/2019 08:17:04 tester: python /tmp/tester/scapy_ens160f0.cmd1571271421.83
17/10/2019 08:17:05 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:17:15 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:17:15 dut.10.240.176.196: stop
17/10/2019 08:17:15 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:17:16 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:17:16 TestVxlan: vxlan packet [inner_l4_invalid = 1]
17/10/2019 08:17:16 dut.10.240.176.196: start
17/10/2019 08:17:16 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:17:16 tester: ls -d /tmp/tester/
17/10/2019 08:17:16 tester: /tmp/tester/
17/10/2019 08:17:16 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:17:16 tester:
17/10/2019 08:17:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271441.72 root@10.240.176.173:/tmp/tester/
17/10/2019 08:17:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271441.72 root@10.240.176.173:/tmp/tester/
17/10/2019 08:17:24 tester: python /tmp/tester/scapy_ens160f0.cmd1571271441.72
17/10/2019 08:17:25 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:17:34 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:17:34 dut.10.240.176.196: stop
17/10/2019 08:17:35 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:17:36 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:17:36 TestVxlan: vxlan packet [inner_l4_type = TCP][inner_l4_invalid = 1]
17/10/2019 08:17:36 dut.10.240.176.196: start
17/10/2019 08:17:36 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:17:36 tester: ls -d /tmp/tester/
17/10/2019 08:17:36 tester: /tmp/tester/
17/10/2019 08:17:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:17:36 tester:
17/10/2019 08:17:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271461.58 root@10.240.176.173:/tmp/tester/
17/10/2019 08:17:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271461.58 root@10.240.176.173:/tmp/tester/
17/10/2019 08:17:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571271461.58
17/10/2019 08:17:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:17:54 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:17:54 dut.10.240.176.196: stop
17/10/2019 08:17:54 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:17:55 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 08:17:55 TestVxlan: vxlan packet [inner_l4_type = SCTP][inner_l4_invalid = 1]
17/10/2019 08:17:55 dut.10.240.176.196: start
17/10/2019 08:17:56 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:17:56 tester: ls -d /tmp/tester/
17/10/2019 08:17:56 tester: /tmp/tester/
17/10/2019 08:17:56 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:17:56 tester:
17/10/2019 08:18:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271481.45 root@10.240.176.173:/tmp/tester/
17/10/2019 08:18:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271481.45 root@10.240.176.173:/tmp/tester/
17/10/2019 08:18:04 tester: python /tmp/tester/scapy_ens160f0.cmd1571271481.45
17/10/2019 08:18:05 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 08:18:14 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 08:18:14 dut.10.240.176.196: stop
17/10/2019 08:18:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:18:15 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:18:15 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip_invalid = 1]
17/10/2019 08:18:15 dut.10.240.176.196: start
17/10/2019 08:18:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:18:15 tester: ls -d /tmp/tester/
17/10/2019 08:18:16 tester: /tmp/tester/
17/10/2019 08:18:16 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:18:16 tester:
17/10/2019 08:18:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271501.32 root@10.240.176.173:/tmp/tester/
17/10/2019 08:18:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271501.32 root@10.240.176.173:/tmp/tester/
17/10/2019 08:18:24 tester: python /tmp/tester/scapy_ens160f0.cmd1571271501.32
17/10/2019 08:18:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:18:34 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:18:34 dut.10.240.176.196: stop
17/10/2019 08:18:34 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:18:35 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:18:35 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1]
17/10/2019 08:18:35 dut.10.240.176.196: start
17/10/2019 08:18:35 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:18:35 tester: ls -d /tmp/tester/
17/10/2019 08:18:36 tester: /tmp/tester/
17/10/2019 08:18:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:18:36 tester:
17/10/2019 08:18:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271521.19 root@10.240.176.173:/tmp/tester/
17/10/2019 08:18:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271521.19 root@10.240.176.173:/tmp/tester/
17/10/2019 08:18:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571271521.19
17/10/2019 08:18:44 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:18:54 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:18:54 dut.10.240.176.196: stop
17/10/2019 08:18:54 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:18:55 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:18:55 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][outer_ip_invalid = 1]
17/10/2019 08:18:55 dut.10.240.176.196: start
17/10/2019 08:18:55 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:18:55 tester: ls -d /tmp/tester/
17/10/2019 08:18:55 tester: /tmp/tester/
17/10/2019 08:18:55 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:18:56 tester:
17/10/2019 08:19:01 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271541.2 root@10.240.176.173:/tmp/tester/
17/10/2019 08:19:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271541.2 root@10.240.176.173:/tmp/tester/
17/10/2019 08:19:04 tester: python /tmp/tester/scapy_ens160f0.cmd1571271541.2
17/10/2019 08:19:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:19:14 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:19:14 dut.10.240.176.196: stop
17/10/2019 08:19:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:19:15 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:19:15 TestVxlan: vxlan packet [outer_vlan = 1][inner_vlan = 1][outer_ip_invalid = 1]
17/10/2019 08:19:15 dut.10.240.176.196: start
17/10/2019 08:19:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:19:15 tester: ls -d /tmp/tester/
17/10/2019 08:19:15 tester: /tmp/tester/
17/10/2019 08:19:15 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:19:16 tester:
17/10/2019 08:19:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271561.12 root@10.240.176.173:/tmp/tester/
17/10/2019 08:19:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271561.12 root@10.240.176.173:/tmp/tester/
17/10/2019 08:19:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571271561.12
17/10/2019 08:19:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:19:34 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:19:34 dut.10.240.176.196: stop
17/10/2019 08:19:34 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:19:35 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:19:35 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][inner_vlan = 1]
17/10/2019 08:19:35 dut.10.240.176.196: start
17/10/2019 08:19:35 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:19:35 tester: ls -d /tmp/tester/
17/10/2019 08:19:35 tester: /tmp/tester/
17/10/2019 08:19:35 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:19:35 tester:
17/10/2019 08:19:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271581.03 root@10.240.176.173:/tmp/tester/
17/10/2019 08:19:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271581.03 root@10.240.176.173:/tmp/tester/
17/10/2019 08:19:43 tester: python /tmp/tester/scapy_ens160f0.cmd1571271581.03
17/10/2019 08:19:44 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=4590)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:19:54 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:19:54 dut.10.240.176.196: stop
17/10/2019 08:19:54 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:19:55 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:19:55 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][inner_vlan = 1][outer_ip_invalid = 1]
17/10/2019 08:19:55 dut.10.240.176.196: start
17/10/2019 08:19:55 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:19:55 tester: ls -d /tmp/tester/
17/10/2019 08:19:55 tester: /tmp/tester/
17/10/2019 08:19:55 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:19:55 tester:
17/10/2019 08:20:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271600.94 root@10.240.176.173:/tmp/tester/
17/10/2019 08:20:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271600.94 root@10.240.176.173:/tmp/tester/
17/10/2019 08:20:03 tester: python /tmp/tester/scapy_ens160f0.cmd1571271600.94
17/10/2019 08:20:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=4590)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:20:14 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:20:14 dut.10.240.176.196: stop
17/10/2019 08:20:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:20:15 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:20:15 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = UDP][inner_l4_invalid = 1]
17/10/2019 08:20:15 dut.10.240.176.196: start
17/10/2019 08:20:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:20:15 tester: ls -d /tmp/tester/
17/10/2019 08:20:15 tester: /tmp/tester/
17/10/2019 08:20:15 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:20:15 tester:
17/10/2019 08:20:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271620.86 root@10.240.176.173:/tmp/tester/
17/10/2019 08:20:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271620.86 root@10.240.176.173:/tmp/tester/
17/10/2019 08:20:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571271620.86
17/10/2019 08:20:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:20:34 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:20:34 dut.10.240.176.196: stop
17/10/2019 08:20:34 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:20:35 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:20:35 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = TCP][inner_l4_invalid = 1]
17/10/2019 08:20:35 dut.10.240.176.196: start
17/10/2019 08:20:35 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:20:35 tester: ls -d /tmp/tester/
17/10/2019 08:20:35 tester: /tmp/tester/
17/10/2019 08:20:35 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:20:35 tester:
17/10/2019 08:20:40 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271640.78 root@10.240.176.173:/tmp/tester/
17/10/2019 08:20:42 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271640.78 root@10.240.176.173:/tmp/tester/
17/10/2019 08:20:43 tester: python /tmp/tester/scapy_ens160f0.cmd1571271640.78
17/10/2019 08:20:44 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:20:53 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:20:53 dut.10.240.176.196: stop
17/10/2019 08:20:54 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:20:55 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 08:20:55 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = SCTP][inner_l4_invalid = 1]
17/10/2019 08:20:55 dut.10.240.176.196: start
17/10/2019 08:20:55 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
17/10/2019 08:20:55 tester: ls -d /tmp/tester/
17/10/2019 08:20:55 tester: /tmp/tester/
17/10/2019 08:20:55 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:20:55 tester:
17/10/2019 08:21:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271660.69 root@10.240.176.173:/tmp/tester/
17/10/2019 08:21:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271660.69 root@10.240.176.173:/tmp/tester/
17/10/2019 08:21:03 tester: python /tmp/tester/scapy_ens160f0.cmd1571271660.69
17/10/2019 08:21:04 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 08:21:13 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
17/10/2019 08:21:13 dut.10.240.176.196: stop
17/10/2019 08:21:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:21:14 dut.10.240.176.196: quit
17/10/2019 08:21:17 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:21:17 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result PASSED:
17/10/2019 08:21:17 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:21:20 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
17/10/2019 08:21:21 dut.10.240.176.196:
17/10/2019 08:21:21 tester:
17/10/2019 08:21:21 dut.10.240.176.196: cat config/common_base
17/10/2019 08:21:21 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 08:21:31 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 08:21:31 dut.10.240.176.196:
17/10/2019 08:21:31 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 08:21:31 dut.10.240.176.196:
17/10/2019 08:21:31 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 08:21:31 dut.10.240.176.196:
17/10/2019 08:21:31 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 08:21:31 dut.10.240.176.196:
17/10/2019 08:21:31 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 08:21:31 dut.10.240.176.196:
17/10/2019 08:21:31 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 08:21:32 dut.10.240.176.196:
17/10/2019 08:21:32 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 08:21:32 dut.10.240.176.196:
17/10/2019 08:21:32 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 08:23:35 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_interrupts.o
CC eal_timer.o
CC eal_dev.o
CC eal_alarm.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_timer
== Build lib/librte_stack
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_metrics.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_cfgfile.h
CC rte_pci.o
SYMLINK-FILE include/rte_ring.h
CC rte_cfgfile.o
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_ring_c11_mem.h
CC rte_rcu_qsbr.o
CC rte_ring.o
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_meter.h
CC rte_timer.o
CC rte_meter.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_stack.o
CC rte_stack_std.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_crypto_asym.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_sched
== Build lib/librte_cmdline
== Build lib/librte_ethdev
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
CC rte_sched.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
CC rte_red.o
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
CC rte_approx.o
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC cmdline.o
CC ethdev_private.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC rte_ethdev.o
CC rte_class_eth.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC rte_flow.o
CC cmdline_parse_num.o
CC rte_tm.o
CC cmdline_parse_string.o
CC rte_mtr.o
CC ethdev_profile.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_pdump
== Build lib/librte_distributor
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_ip_frag.h
CC rte_security.o
SYMLINK-FILE include/rte_gso.h
CC rte_ipv4_fragmentation.o
CC rte_latencystats.o
CC rte_gso.o
CC rte_ipv6_fragmentation.o
CC gso_common.o
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_pdump.o
CC rte_ipv4_reassembly.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC rte_ipv6_reassembly.o
CC gso_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_distributor.h
CC rte_gro.o
CC gro_tcp4.o
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_vhost.h
CC rte_ip_frag_common.o
CC rte_distributor_v20.o
CC gso_udp4.o
SYMLINK-FILE include/rte_vdpa.h
CC ip_frag_internal.o
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_event_ring.h
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_bitrate.h
CC rte_distributor.o
CC rte_distributor_match_sse.o
CC rte_kni.o
CC rte_bitrate.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC bpf.o
CC fd_man.o
CC iotlb.o
CC bpf_exec.o
CC bpf_load.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC socket.o
CC vhost.o
CC bpf_pkt.o
CC rte_eventdev.o
CC rte_event_ring.o
CC vhost_user.o
CC bpf_validate.o
CC bpf_jit_x86.o
CC virtio_net.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
CC vdpa.o
CC vhost_crypto.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
SYMLINK-FILE include/rte_flow_classify.h
CC rte_pipeline.o
CC rte_flow_classify.o
CC rte_port_in_action.o
CC rte_flow_classify_parse.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC octeontx_mbox.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vdev_params.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/mc_sys.o
CC mc/dpbp.o
CC mc/dpio.o
CC dpaa_bus.o
CC mc/dpcon.o
CC mc/dpci.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
SYMLINK-FILE include/rte_bus_vmbus.h
CC base/fman/netcfg_layer.o
SYMLINK-FILE include/rte_vmbus_reg.h
CC fslmc_vfio.o
SYMLINK-FILE include/rte_bus_pci.h
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_bus.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
CC linux/vmbus_bus.o
CC linux/pci.o
CC linux/vmbus_uio.o
CC linux/pci_uio.o
CC linux/pci_vfio.o
CC pci_params.o
CC vmbus_common.o
CC vmbus_channel.o
CC pci_common.o
CC pci_common_uio.o
CC base/qbman/qman.o
CC vmbus_bufring.o
Building modules, stage 2.
CC vmbus_common_uio.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
MODPOST 1 modules
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpci.o
MODPOST 1 modules
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC dpaa_mempool.o
CC rte_mempool_stack.o
CC rte_mempool_ring.o
CC rte_mempool_bucket.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_ring.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/crypto/octeontx
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/scheduler
== Build drivers/crypto/caam_jr
== Build drivers/crypto/nitrox
== Build drivers/crypto/virtio
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/af_packet
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/e1000
== Build drivers/net/enetc
== Build drivers/net/ena
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/baseband/null
== Build drivers/baseband/fpga_lte_fec
== Build drivers/baseband/turbo_sw
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/net/memif
== Build drivers/net/liquidio
== Build drivers/net/netvsc
CC qat_comp.o
== Build drivers/compress/octeontx
CC rte_eth_af_packet.o
CC virtqueue.o
CC dpaa_sec.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC otx_cryptodev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC iavf_adminq.o
SYMLINK-FILE include/rte_eth_bond.h
CC enetc_ethdev.o
CC axgbe_ethdev.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC bbdev_turbo_software.o
SYMLINK-FILE include/rte_avp_common.h
CC caam_jr.o
CC ark_ddm.o
CC ipn3ke_ethdev.o
CC nitrox_device.o
CC dpaa_ethdev.o
CC failsafe.o
CC hns3_ethdev.o
CC base/dpaa2_hw_dpni.o
CC atl_rxtx.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC ena_ethdev.o
SYMLINK-FILE include/fpga_lte_fec.h
CC dpaa2_sec_dpseci.o
SYMLINK-FILE include/rte_avp_fifo.h
CC bbdev_null.o
CC scheduler_pmd.o
CC hinic_pmd_api_cmd.o
CC rte_eth_memif.o
CC cxgbe_ethdev.o
CC hn_ethdev.o
CC enic_ethdev.o
CC lio_ethdev.o
CC fpga_lte_fec.o
CC rte_eth_bond_api.o
CC avp_ethdev.o
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_pmd_ice.h
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC e1000_80003es2lan.o
CC ice_controlq.o
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC e1000_82540.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD otx_cryptodev.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
CC otx_cryptodev_capabilities.o
LD nitrox_device.o
CC nitrox_hal.o
CC qat_comp_pmd.o
CC dpaa2_rxtx.o
CC e1000_82541.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC scheduler_pmd_ops.o
LD failsafe.o
CC failsafe_args.o
CC hinic_pmd_cfg.o
CC nitrox_logs.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
LD bbdev_null.o
LD axgbe_ethdev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC nitrox_sym.o
CC axgbe_dev.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
CC rte_cryptodev_scheduler.o
LD ipn3ke_ethdev.o
CC virtio_pci.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
CC ipn3ke_representor.o
LD hn_ethdev.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC hn_rxtx.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD null_crypto_pmd.o
LD fpga_lte_fec.o
CC null_crypto_pmd_ops.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
AR librte_pmd_bbdev_fpga_lte_fec.a
CC enic_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC hn_rndis.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD otx_zip_pmd.o
LD enic_ethdev.o
LD ark_ethdev.o
CC otx_zip.o
CC e1000_82542.o
CC enic_main.o
CC rte_eth_bond_pmd.o
CC ark_ethdev_rx.o
PMDINFO dpaa_ethdev.o.pmd.c
PMDINFO bbdev_turbo_software.o.pmd.c
CC dpaa_ethdev.o.pmd.o
CC bbdev_turbo_software.o.pmd.o
LD bbdev_turbo_software.o
LD dpaa_ethdev.o
PMDINFO enetc_ethdev.o.pmd.c
AR librte_pmd_bbdev_turbo_sw.a
CC enetc_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC dpaa_rxtx.o
CC ipn3ke_tm.o
LD enetc_ethdev.o
CC otx_cryptodev_hw_access.o
CC enetc_rxtx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC e1000_82543.o
CC lio_rxtx.o
CC hinic_pmd_cmdq.o
CC qat_device.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC qat_common.o
CC qat_logs.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC atl_ethdev.o
CC memif_socket.o
CC atl_hw_regs.o
CC failsafe_eal.o
CC virtio_rxtx.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC virtio_cryptodev.o
CC ixgbe_82598.o
CC e1000_82571.o
CC e1000_82575.o
CC otx_cryptodev_mbox.o
CC nitrox_sym_capabilities.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
AR librte_pmd_null_crypto.a
CC nitrox_sym_reqmgr.o
INSTALL-LIB librte_pmd_null_crypto.a
CC nitrox_qp.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
CC axgbe_mdio.o
CC iavf_common.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
CC axgbe_phy_impl.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
LD qat_device.o
CC e1000_i210.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC hinic_pmd_eqs.o
CC hinic_pmd_hwdev.o
LD fm10k_ethdev.o
CC qat_qp.o
CC fm10k_rxtx.o
CC ixgbe_82599.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
CC i40e_common.o
LD hns3_ethdev.o
CC hns3_ethdev_vf.o
CC failsafe_ops.o
CC failsafe_rxtx.o
CC failsafe_ether.o
CC ice_common.o
CC ipn3ke_flow.o
CC hns3_cmd.o
CC otx_cryptodev_ops.o
CC ark_ethdev_tx.o
CC ark_mpu.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
== Build drivers/net/nfp
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
CC e1000_api.o
LD cxgbevf_ethdev.o
CC e1000_ich8lan.o
CC cxgbe_main.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC cxgbevf_main.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC enic_rxtx.o
CC ena_com.o
CC scheduler_roundrobin.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD virtio_cryptodev.o
LD atl_ethdev.o
CC scheduler_pkt_size_distr.o
CC ixgbe_x540.o
CC hinic_pmd_hwif.o
CC nfp_cppcore.o
CC hw_atl_utils.o
CC hw_atl_llh.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC enic_clsf.o
CC enic_res.o
CC ixgbe_x550.o
AR librte_pmd_qat.a
CC ixgbe_phy.o
INSTALL-LIB librte_pmd_qat.a
CC failsafe_flow.o
CC iavf_ethdev.o
CC lio_23xx_vf.o
CC axgbe_i2c.o
CC axgbe_rxtx.o
CC iavf_vchnl.o
CC dpaa2_ethdev.o
CC dpaa2_flow.o
CC dpaa2_mux.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC dpaa2_sparser.o
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC hns3_mbx.o
CC hns3_rxtx.o
CC hinic_pmd_mgmt.o
CC ena_eth_com.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC i40e_diag.o
CC hn_nvs.o
CC scheduler_failover.o
CC ark_pktchkr.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
CC enic_flow.o
CC rte_eth_bond_args.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC rte_eth_bond_8023ad.o
CC sge.o
CC hw_atl_utils_fw2x.o
CC hw_atl_b0.o
CC hinic_pmd_niccfg.o
== Build drivers/net/bnxt
CC nfp_cpp_pcie_ops.o
CC lio_mbox.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC hn_vf.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC rte_pmd_atlantic.o
== Build drivers/net/null
CC base/vnic_cq.o
CC e1000_logs.o
CC hinic_pmd_nicio.o
CC hinic_pmd_wq.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC e1000_mac.o
CC bnxt_cpr.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
CC bnxt_ethdev.o
CC bnxt_filter.o
CC bnxt_flow.o
CC ixgbe_api.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC fm10k_pf.o
CC rte_eth_null.o
CC caam_jr_capabilities.o
CC hinic_pmd_ethdev.o
CC scheduler_multicore.o
CC cxgbe_filter.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC ark_pktdir.o
LD dpaa2_ethdev.o
CC cxgbe_flow.o
CC i40e_hmc.o
CC base/vnic_wq.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC base/vnic_dev.o
CC ixgbe_vf.o
AR librte_pmd_netvsc.a
AR librte_pmd_lio.a
CC e1000_manage.o
CC ixgbe_hv_vf.o
CC mc/dpni.o
CC hinic_pmd_rx.o
CC ixgbe_dcb.o
CC base/vnic_intr.o
INSTALL-LIB librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_lio.a
CC base/vnic_rq.o
CC bnxt_hwrm.o
CC axgbe_rxtx_vec_sse.o
CC caam_jr_hw.o
CC bnxt_ring.o
CC ice_sched.o
CC hns3_rss.o
CC ice_switch.o
CC nfp_mutex.o
CC enic_rxtx_vec_avx2.o
CC caam_jr_uio.o
CC fm10k_tlv.o
CC bnxt_rxq.o
CC e1000_mbx.o
CC bnxt_rxr.o
CC ark_pktgen.o
PMDINFO dpaa_sec.o.pmd.c
CC bnxt_stats.o
CC dpaa_sec.o.pmd.o
CC ixgbe_dcb_82599.o
LD dpaa_sec.o
CC ixgbe_dcb_82598.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC bnxt_txq.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
AR librte_pmd_dpaa_sec.a
CC i40e_lan_hmc.o
CC fm10k_common.o
INSTALL-LIB librte_pmd_dpaa_sec.a
CC e1000_nvm.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
LD iavf_ethdev.o
CC ixgbe_mbx.o
CC mc/dpkg.o
CC e1000_osdep.o
CC mc/dpdmux.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC e1000_phy.o
CC ark_rqp.o
CC ixgbe_rxtx.o
CC hinic_pmd_tx.o
CC iavf_rxtx.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_axgbe.a
CC ark_udm.o
CC hns3_flow.o
CC e1000_vf.o
CC fm10k_mbx.o
INSTALL-LIB librte_pmd_axgbe.a
CC hns3_fdir.o
CC fm10k_vf.o
CC rte_eth_bond_alb.o
CC nfp_resource.o
CC iavf_rxtx_vec_sse.o
AR librte_pmd_dpaa2.a
CC mc/dpseci.o
INSTALL-LIB librte_pmd_dpaa2.a
CC ixgbe_ethdev.o
== Build drivers/net/octeontx
AR librte_pmd_caam_jr.a
CC i40e_nvm.o
== Build drivers/net/octeontx2
INSTALL-LIB librte_pmd_caam_jr.a
== Build drivers/net/qede
CC octeontx_rxtx.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
AR librte_pmd_ark.a
CC i40e_dcb.o
CC igb_ethdev.o
CC octeontx_pkovf.o
CC rte_eth_bond_flow.o
CC nfp_crc.o
CC fm10k_api.o
== Build drivers/net/ring
CC fm10k_rxtx_vec.o
CC igb_rxtx.o
INSTALL-LIB librte_pmd_ark.a
CC nfp_mip.o
CC otx2_rx.o
LD bnxt_ethdev.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
CC ecore_dev.o
LD rte_eth_null.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
AR librte_pmd_enic.a
AR librte_pmd_dpaa2_sec.a
CC otx2_tx.o
CC otx2_tm.o
CC octeontx_pkivf.o
INSTALL-LIB librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_enic.a
CC octeontx_bgx.o
CC otx2_rss.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
LD octeontx_pkovf.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
AR librte_pmd_null.a
CC otx2_mac.o
CC octeontx_ethdev.o
CC nfp_nffw.o
INSTALL-LIB librte_pmd_null.a
CC otx2_ptp.o
LD octeontx_pkivf.o
CC ice_nvm.o
CC otx2_flow.o
== Build drivers/net/sfc
CC ice_flex_pipe.o
CC i40e_ethdev.o
CC i40e_rxtx.o
CC ecore_hw.o
CC ixgbe_fdir.o
CC bnxt_txr.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC ixgbe_pf.o
CC ixgbe_flow.o
CC hns3_intr.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
CC sfc_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC sfc_kvargs.o
CC sfc.o
CC sfc_mcdi.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
CC otx2_link.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC otx2_vlan.o
CC ice_flow.o
== Build drivers/net/tap
CC failsafe_intr.o
CC ixgbe_rxtx_vec_sse.o
CC sfc_intr.o
CC i40e_ethdev_vf.o
CC sfc_ev.o
CC hns3_stats.o
CC hns3_regs.o
CC hns3_dcb.o
CC nfp_nsp.o
CC nfp_nsp_cmds.o
CC ixgbe_ipsec.o
CC rte_pmd_ixgbe.o
CC t4_hw.o
CC rte_eth_tap.o
CC tap_flow.o
CC ice_dcb.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC ice_fdir.o
CC igb_pf.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC ice_ethdev.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
== Build drivers/net/thunderx
CC bnxt_vnic.o
CC nfp_nsp_eth.o
CC bnxt_irq.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC bnxt_util.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC nicvf_rxtx.o
CC otx2_stats.o
CC nfp_net.o
CC otx2_lookup.o
CC ecore_cxt.o
CC ecore_l2.o
CC ecore_sp_commands.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC hns3_mp.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC sfc_port.o
CC sfc_rx.o
CC sfc_tx.o
CC ecore_init_fw_funcs.o
CC ixgbe_tm.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC igb_flow.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
CC ixgbe_vf_representor.o
LD ixgbe_ethdev.o
CC ice_rxtx.o
CC em_ethdev.o
CC em_rxtx.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC tap_netlink.o
CC i40e_pf.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC otx2_flow_parse.o
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
== Build drivers/net/vmxnet3
== Build drivers/net/kni
== Build drivers/net/softnic
CC i40e_fdir.o
CC vdev_netvsc.o
CC virtqueue.o
CC nicvf_hw.o
CC vmxnet3_rxtx.o
CC i40e_flow.o
CC vmxnet3_ethdev.o
CC rte_eth_kni.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
CC rte_pmd_i40e.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC i40e_tm.o
CC sfc_tso.o
== Build drivers/net/vhost
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
== Build drivers/net/ifc
CC ecore_spq.o
CC sfc_filter.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC clip_tbl.o
CC mps_tcam.o
CC l2t.o
CC t4vf_hw.o
CC sfc_flow.o
CC nicvf_mbox.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC i40e_vf_representor.o
CC ifcvf_vdpa.o
CC otx2_flow_utils.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC nicvf_ethdev.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD rte_eth_kni.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
LD vdev_netvsc.o
AR librte_pmd_kni.a
LD nfp_net.o
INSTALL-LIB librte_pmd_kni.a
AR librte_pmd_vdev_netvsc.a
CC nicvf_bsvf.o
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC nicvf_svf.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC ifcvf.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
CC sfc_dp.o
CC sfc_ef10_rx.o
LD rte_eth_softnic.o
CC sfc_ef10_essb_rx.o
CC rte_eth_softnic_mempool.o
CC ecore_init_ops.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
LD vmxnet3_ethdev.o
CC tap_tcmsgs.o
CC tap_bpf_api.o
CC ecore_mcp.o
CC ecore_int.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC efx_crc32.o
CC virtio_pci.o
CC efx_ev.o
CC tap_intr.o
CC efx_evb.o
CC efx_filter.o
CC efx_hash.o
CC efx_intr.o
CC efx_lic.o
CC otx2_ethdev_irq.o
CC rte_eth_softnic_swq.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
LD ifcvf_vdpa.o
AR librte_pmd_cxgbe.a
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
INSTALL-LIB librte_pmd_cxgbe.a
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
CC rte_eth_softnic_tap.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
CC rte_eth_softnic_action.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
CC rte_eth_softnic_pipeline.o
CC virtio_rxtx.o
CC virtio_ethdev.o
CC efx_mac.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC efx_mcdi.o
LD rte_eth_tap.o
CC ecore_dcbx.o
AR librte_pmd_tap.a
CC efx_mon.o
CC efx_nic.o
INSTALL-LIB librte_pmd_tap.a
CC efx_nvram.o
CC efx_phy.o
CC bcm_osal.o
CC ecore_sriov.o
CC ecore_vf.o
CC qede_ethdev.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC qede_main.o
LD rte_eth_vhost.o
CC efx_port.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC efx_proxy.o
CC efx_rx.o
CC qede_rxtx.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC qede_filter.o
CC efx_sram.o
CC efx_tunnel.o
CC rte_eth_softnic_thread.o
CC rte_eth_softnic_cli.o
CC rte_eth_softnic_flow.o
CC efx_tx.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC efx_vpd.o
CC mcdi_mon.o
LD i40e_ethdev.o
CC rte_eth_softnic_meter.o
CC virtio_rxtx_simple.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC virtio_rxtx_simple_sse.o
CC virtio_user/vhost_user.o
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC siena_nvram.o
CC rte_eth_softnic_cryptodev.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
CC siena_phy.o
CC parser.o
CC conn.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
AR librte_pmd_vmxnet3_uio.a
CC ef10_image.o
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx2
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC skeleton_eventdev.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC ssovf_worker.o
CC otx2_tim_worker.o
CC ssovf_evdev.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC ssovf_evdev_selftest.o
CC dpaa_eventdev.o
CC ssovf_probe.o
CC timvf_worker.o
CC otx2_tim_evdev.o
CC timvf_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC timvf_probe.o
CC dpaa2_hw_dpcon.o
CC opdl_ring.o
CC opdl_evdev.o
CC sw_evdev.o
CC opdl_evdev_init.o
CC sw_evdev_worker.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC sw_evdev_scheduler.o
CC opdl_evdev_xstats.o
CC sw_evdev_xstats.o
CC opdl_test.o
CC sw_evdev_selftest.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
LD timvf_probe.o
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_evdev.o
LD ssovf_probe.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC ntb.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC skeleton_rawdev.o
CC dpaa2_cmdif.o
CC skeleton_rawdev_test.o
CC dpaa2_qdma.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD dpaa2_qdma.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/pdump
== Build app/test-acl
== Build app/test-pipeline
== Build app/test-compress-perf
== Build app/test-cmdline
== Build app/test-bbdev
== Build app/test-eventdev
== Build app/test-crypto-perf
CC main.o
CC cmdline_test.o
CC commands.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC comp_perf_test_verify.o
CC testpmd.o
CC parameters.o
CC comp_perf_test_benchmark.o
CC comp_perf_test_common.o
CC cmdline.o
CC cmdline_flow.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC config.o
CC main.o
CC iofwd.o
CC macfwd.o
CC main.o
CC test_bbdev.o
CC macswap.o
CC flowgen.o
CC evt_main.o
CC evt_options.o
CC rxonly.o
CC txonly.o
CC evt_test.o
CC parser.o
CC csumonly.o
CC test_bbdev_perf.o
CC icmpecho.o
CC test_order_common.o
CC main.o
CC test_bbdev_vector.o
CC config.o
CC main.o
CC cperf_ops.o
LD cmdline_test
CC cperf_options_parsing.o
CC commands.o
CC test.o
CC test_order_queue.o
CC test_order_atq.o
CC test_perf_common.o
LD testacl
LD dpdk-procinfo
CC init.o
CC resource.o
CC test_resource.o
CC test_perf_queue.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_prefetch.o
CC test_byteorder.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_per_lcore.o
CC test_pipeline_atq.o
CC noisy_vnf.o
CC test_atomic.o
CC test_barrier.o
CC test_malloc.o
CC bpf_cmd.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
LD dpdk-pdump
CC cperf_test_vectors.o
CC test_memory.o
CC util.o
CC cperf_test_throughput.o
CC softnicfwd.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
CC cperf_test_verify.o
INSTALL-APP testacl
CC cperf_test_vector_parsing.o
CC runtime.o
INSTALL-MAP testacl.map
CC test_memzone.o
CC test_bitmap.o
CC pipeline_stub.o
CC test_reciprocal_division.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC cperf_test_common.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC pipeline_hash.o
CC test_table_ports.o
CC pipeline_lpm.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC pipeline_lpm_ipv6.o
CC pipeline_acl.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
LD dpdk-test-eventdev
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
LD testpipeline
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
INSTALL-APP testpipeline
CC test_power.o
INSTALL-MAP testpipeline.map
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
LD dpdk-test-crypto-perf
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
LD testpmd
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 08:23:35 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 08:23:48 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:23:48 dut.10.240.176.196: set fwd rxonly
17/10/2019 08:23:48 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 08:23:48 dut.10.240.176.196: set verbose 1
17/10/2019 08:23:48 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 08:23:48 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:23:48 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:23:53 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:23:53 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:23:58 TestVxlan: send vxlan pkts [outer_udp_dst = 1234]
17/10/2019 08:23:58 dut.10.240.176.196: start
17/10/2019 08:23:58 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:23:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271838.9 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271838.9 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571271838.9
17/10/2019 08:24:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63338, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:24:04 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:24:04 TestVxlan: send vxlan pkts [inner_l4_type = UDP]
17/10/2019 08:24:04 dut.10.240.176.196: start
17/10/2019 08:24:04 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:24:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271844.61 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:05 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271844.61 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:07 tester: python /tmp/tester/scapy_ens160f0.cmd1571271844.61
17/10/2019 08:24:08 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:24:10 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:24:10 TestVxlan: send vxlan pkts [inner_l4_type = TCP]
17/10/2019 08:24:10 dut.10.240.176.196: start
17/10/2019 08:24:10 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:24:10 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271850.18 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:11 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271850.18 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:12 tester: python /tmp/tester/scapy_ens160f0.cmd1571271850.18
17/10/2019 08:24:13 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=40309)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:24:15 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:24:15 TestVxlan: send vxlan pkts [inner_l4_type = SCTP]
17/10/2019 08:24:15 dut.10.240.176.196: start
17/10/2019 08:24:15 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:24:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271855.76 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:17 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271855.76 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:18 tester: python /tmp/tester/scapy_ens160f0.cmd1571271855.76
17/10/2019 08:24:19 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=4564)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 08:24:21 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=128 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:24:21 TestVxlan: send vxlan pkts [outer_vlan = 1]
17/10/2019 08:24:21 dut.10.240.176.196: start
17/10/2019 08:24:21 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:24:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271861.34 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271861.34 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:24 tester: python /tmp/tester/scapy_ens160f0.cmd1571271861.34
17/10/2019 08:24:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:24:26 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:24:26 TestVxlan: send vxlan pkts [outer_vlan = 1][inner_vlan = 1]
17/10/2019 08:24:26 dut.10.240.176.196: start
17/10/2019 08:24:26 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:24:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571271866.94 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:28 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571271866.94 root@10.240.176.173:/tmp/tester/
17/10/2019 08:24:29 tester: python /tmp/tester/scapy_ens160f0.cmd1571271866.94
17/10/2019 08:24:30 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:24:32 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=118 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:24:32 dut.10.240.176.196: stop
17/10/2019 08:24:32 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 6 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:24:32 dut.10.240.176.196: quit
17/10/2019 08:24:36 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:24:36 dut.10.240.176.196: cat config/common_base
17/10/2019 08:24:36 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 08:24:36 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 08:24:36 dut.10.240.176.196:
17/10/2019 08:24:36 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 08:24:36 dut.10.240.176.196:
17/10/2019 08:24:36 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 08:24:36 dut.10.240.176.196:
17/10/2019 08:24:36 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 08:24:36 dut.10.240.176.196:
17/10/2019 08:24:36 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 08:24:36 dut.10.240.176.196:
17/10/2019 08:24:36 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 08:24:37 dut.10.240.176.196:
17/10/2019 08:24:37 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 08:24:37 dut.10.240.176.196:
17/10/2019 08:24:37 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 08:26:39 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_lcore.o
CC eal_debug.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_jobstats
== Build lib/librte_rcu
SYMLINK-FILE include/rte_pci.h
CC rte_pci.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_timer.h
SYMLINK-FILE include/rte_ring_c11_mem.h
CC rte_timer.o
CC rte_ring.o
SYMLINK-FILE include/rte_metrics.h
CC rte_metrics.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_jobstats.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_meter.o
CC rte_rcu_qsbr.o
CC rte_stack.o
CC rte_stack_std.o
SYMLINK-FILE include/rte_cfgfile.h
CC rte_stack_lf.o
CC rte_cfgfile.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_timer.a
INSTALL-LIB librte_timer.a
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_member
== Build lib/librte_lpm
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
CC ethdev_private.o
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC cmdline.o
CC rte_tm.o
CC rte_mtr.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC ethdev_profile.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
SYMLINK-FILE include/rte_efd.h
CC rte_lpm.o
CC rte_efd.o
CC rte_lpm6.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_ip_frag
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_bitratestats
== Build lib/librte_gro
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_bpf
== Build lib/librte_gso
SYMLINK-FILE include/rte_pdump.h
CC rte_pdump.o
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_security.o
SYMLINK-FILE include/rte_bitrate.h
CC rte_kni.o
CC fd_man.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC rte_bitrate.o
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC iotlb.o
SYMLINK-FILE include/rte_latencystats.h
CC socket.o
CC rte_gro.o
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/rte_ip_frag.h
CC gro_tcp4.o
CC rte_gso.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC rte_latencystats.o
CC gso_common.o
CC gro_vxlan_tcp4.o
CC rte_distributor_v20.o
CC rte_ipv4_fragmentation.o
CC vhost.o
CC virtio_net.o
CC gso_tcp4.o
CC vhost_user.o
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_event_ring.h
CC vdpa.o
CC gso_udp4.o
CC rte_ipv6_fragmentation.o
SYMLINK-FILE include/bpf_def.h
CC rte_ipv4_reassembly.o
CC vhost_crypto.o
CC rte_ipv6_reassembly.o
SYMLINK-FILE include/rte_bpf.h
CC rte_distributor.o
SYMLINK-FILE include/rte_bpf_ethdev.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC rte_ip_frag_common.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC ip_frag_internal.o
CC bpf.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC bpf_exec.o
CC bpf_load.o
CC bpf_pkt.o
CC bpf_validate.o
CC bpf_jit_x86.o
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
SYMLINK-FILE include/rte_flow_classify.h
CC rte_port_in_action.o
CC rte_table_action.o
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx2
== Build drivers/common/octeontx
== Build drivers/common/dpaax
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC cpt_pmd_ops_helper.o
CC octeontx_mbox.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/ifpga
== Build drivers/bus/vmbus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_pci.h
CC dpaa_bus.o
CC base/fman/fman.o
CC base/fman/netcfg_layer.o
CC linux/pci_vfio.o
CC base/fman/fman_hw.o
CC linux/pci.o
CC base/fman/of.o
SYMLINK-FILE include/rte_bus_vdev.h
CC linux/pci_uio.o
CC pci_params.o
CC base/qbman/bman.o
CC pci_common.o
CC base/qbman/process.o
CC base/qbman/bman_driver.o
CC qbman/qbman_debug.o
CC vdev.o
CC qbman/qbman_portal.o
CC pci_common_uio.o
CC vdev_params.o
CC mc/dpmng.o
SYMLINK-FILE include/rte_bus_vmbus.h
CC base/qbman/qman.o
CC mc/dpbp.o
SYMLINK-FILE include/rte_vmbus_reg.h
CC base/qbman/qman_driver.o
CC mc/mc_sys.o
CC mc/dpio.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
CC mc/dpcon.o
CC mc/dpci.o
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC mc/dpdmai.o
CC vmbus_common.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
Building modules, stage 2.
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vdev.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD portal/dpaa2_hw_dpci.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
MODPOST 1 modules
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC dpaa_mempool.o
CC rte_mempool_ring.o
CC rte_mempool_stack.o
CC rte_mempool_bucket.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_stack.a
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_stack.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_ring.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/baseband/null
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
CC qat_comp.o
CC qat_comp_pmd.o
== Build drivers/compress/octeontx
CC qat_device.o
CC qat_common.o
CC qat_logs.o
CC qat_qp.o
== Build drivers/crypto/octeontx
== Build drivers/crypto/scheduler
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/caam_jr
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/crypto/null
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/bonding
== Build drivers/net/axgbe
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/ena
== Build drivers/net/e1000
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
CC bbdev_turbo_software.o
CC bbdev_null.o
SYMLINK-FILE include/fpga_lte_fec.h
CC otx_zip_pmd.o
CC rte_eth_af_packet.o
CC fpga_lte_fec.o
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC dpaa_sec.o
CC otx_cryptodev.o
CC caam_jr.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC ark_ddm.o
CC enetc_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC hinic_pmd_api_cmd.o
SYMLINK-FILE include/rte_avp_common.h
CC failsafe.o
CC atl_rxtx.o
CC dpaa2_sec_dpseci.o
CC virtqueue.o
CC scheduler_pmd.o
CC ena_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
SYMLINK-FILE include/rte_eth_bond.h
CC nitrox_device.o
CC dpaa_ethdev.o
CC axgbe_ethdev.o
CC iavf_adminq.o
SYMLINK-FILE include/rte_avp_fifo.h
CC hns3_ethdev.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC base/dpaa2_hw_dpni.o
CC avp_ethdev.o
CC cxgbe_ethdev.o
CC rte_eth_bond_api.o
CC enic_ethdev.o
CC ipn3ke_ethdev.o
SYMLINK-FILE include/rte_pmd_ice.h
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC e1000_80003es2lan.o
CC ice_controlq.o
CC i40e_adminq.o
CC ark_ethdev.o
CC iavf_common.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC null_crypto_pmd_ops.o
CC caam_jr_capabilities.o
CC e1000_82540.o
== Build drivers/net/ixgbe
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
PMDINFO nitrox_device.o.pmd.c
LD otx_cryptodev.o
CC nitrox_device.o.pmd.o
LD nitrox_device.o
CC otx_cryptodev_capabilities.o
CC nitrox_hal.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC caam_jr_hw.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
LD bbdev_null.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC dpaa2_rxtx.o
AR librte_pmd_bbdev_null.a
CC e1000_82541.o
INSTALL-LIB librte_pmd_bbdev_null.a
CC scheduler_pmd_ops.o
CC hinic_pmd_cfg.o
LD failsafe.o
CC hinic_pmd_cmdq.o
CC failsafe_args.o
CC nitrox_logs.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
CC nitrox_sym.o
LD axgbe_ethdev.o
CC axgbe_dev.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
LD null_crypto_pmd.o
CC ixgbe_common.o
CC virtio_pci.o
LD ipn3ke_ethdev.o
CC virtio_rxtx.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC ipn3ke_representor.o
LD bbdev_turbo_software.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
AR librte_pmd_bbdev_turbo_sw.a
LD otx_zip_pmd.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC ipn3ke_tm.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC otx_zip.o
LD ark_ethdev.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
CC mc/dpseci.o
CC ark_ethdev_rx.o
LD enic_ethdev.o
CC enic_main.o
CC otx_cryptodev_hw_access.o
CC e1000_82542.o
CC rte_eth_bond_pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD dpaa_ethdev.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC dpaa_rxtx.o
LD enetc_ethdev.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC enetc_rxtx.o
LD fpga_lte_fec.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
AR librte_pmd_null_crypto.a
CC nitrox_sym_capabilities.o
CC nitrox_sym_reqmgr.o
INSTALL-LIB librte_pmd_null_crypto.a
CC nitrox_qp.o
CC e1000_82543.o
CC e1000_82571.o
CC otx_cryptodev_mbox.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
CC otx_cryptodev_ops.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_eqs.o
CC rte_eth_bond_args.o
CC rte_cryptodev_scheduler.o
CC atl_ethdev.o
CC failsafe_eal.o
CC failsafe_ops.o
AR librte_pmd_octeontx_zip.a
CC virtio_cryptodev.o
INSTALL-LIB librte_pmd_octeontx_zip.a
CC failsafe_rxtx.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
CC e1000_82575.o
CC e1000_i210.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
CC rte_eth_bond_8023ad.o
CC caam_jr_uio.o
CC hns3_ethdev_vf.o
CC rte_eth_bond_alb.o
CC rte_eth_bond_flow.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC hns3_cmd.o
CC iavf_ethdev.o
CC iavf_vchnl.o
CC axgbe_mdio.o
CC hinic_pmd_hwdev.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC atl_hw_regs.o
CC hw_atl_utils.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC hw_atl_llh.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC i40e_common.o
LD hns3_ethdev.o
CC fm10k_rxtx.o
CC ena_com.o
CC ipn3ke_flow.o
CC ice_common.o
CC ice_sched.o
CC ice_switch.o
CC ixgbe_82598.o
CC ixgbe_82599.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC ark_ethdev_tx.o
CC cxgbe_main.o
CC cxgbevf_main.o
CC e1000_api.o
CC sge.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
CC cxgbe_filter.o
LD ena_ethdev.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
CC cxgbe_flow.o
LD atl_ethdev.o
CC t4_hw.o
CC clip_tbl.o
CC mps_tcam.o
CC l2t.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC t4vf_hw.o
CC e1000_ich8lan.o
CC hw_atl_utils_fw2x.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC enic_rxtx.o
CC axgbe_phy_impl.o
LD hns3_ethdev_vf.o
CC hns3_mbx.o
CC ena_eth_com.o
CC ixgbe_x540.o
CC ixgbe_x550.o
CC hinic_pmd_hwif.o
CC dpaa2_ethdev.o
CC scheduler_roundrobin.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC e1000_logs.o
AR librte_pmd_ena.a
CC e1000_mac.o
INSTALL-LIB librte_pmd_ena.a
CC e1000_manage.o
== Build drivers/net/liquidio
== Build drivers/net/memif
CC e1000_mbx.o
CC e1000_nvm.o
CC hns3_rxtx.o
CC ark_mpu.o
CC ark_pktchkr.o
CC lio_ethdev.o
CC lio_rxtx.o
CC rte_eth_memif.o
CC ark_pktdir.o
CC hw_atl_b0.o
== Build drivers/net/netvsc
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC ark_pktgen.o
CC ark_rqp.o
CC memif_socket.o
CC ark_udm.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
== Build drivers/net/nfp
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC ixgbe_phy.o
CC rte_pmd_atlantic.o
CC scheduler_pkt_size_distr.o
CC hn_ethdev.o
== Build drivers/net/bnxt
CC enic_clsf.o
CC enic_res.o
CC enic_flow.o
CC axgbe_i2c.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC axgbe_rxtx.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC nfp_cppcore.o
CC e1000_osdep.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC e1000_phy.o
CC axgbe_rxtx_vec_sse.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC fm10k_pf.o
CC bnxt_ethdev.o
CC e1000_vf.o
CC igb_ethdev.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC iavf_rxtx.o
LD dpaa2_ethdev.o
CC hinic_pmd_nicio.o
AR librte_pmd_ark.a
AR librte_pmd_atlantic.a
CC dpaa2_flow.o
CC base/vnic_cq.o
INSTALL-LIB librte_pmd_ark.a
INSTALL-LIB librte_pmd_atlantic.a
CC dpaa2_mux.o
CC base/vnic_wq.o
CC iavf_rxtx_vec_sse.o
CC ixgbe_api.o
CC ixgbe_vf.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC ixgbe_hv_vf.o
CC base/vnic_dev.o
CC scheduler_failover.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC base/vnic_intr.o
CC ice_nvm.o
LD dpaa_sec.o
CC i40e_diag.o
AR librte_pmd_dpaa_sec.a
PMDINFO hn_ethdev.o.pmd.c
INSTALL-LIB librte_pmd_dpaa_sec.a
CC hn_ethdev.o.pmd.o
CC i40e_hmc.o
LD hn_ethdev.o
CC i40e_lan_hmc.o
CC hn_rxtx.o
CC nfp_cpp_pcie_ops.o
CC nfp_mutex.o
CC nfp_resource.o
CC nfp_crc.o
CC igb_rxtx.o
CC fm10k_tlv.o
CC igb_pf.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC igb_flow.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC em_ethdev.o
CC ixgbe_dcb.o
CC ixgbe_dcb_82599.o
CC ice_flex_pipe.o
CC nfp_mip.o
CC em_rxtx.o
CC nfp_nffw.o
CC hinic_pmd_wq.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC hns3_rss.o
CC hns3_flow.o
CC fm10k_common.o
CC hn_rndis.o
CC lio_23xx_vf.o
CC lio_mbox.o
CC ice_flow.o
CC hn_nvs.o
CC fm10k_mbx.o
CC ixgbe_dcb_82598.o
CC scheduler_multicore.o
CC i40e_nvm.o
CC dpaa2_sparser.o
CC mc/dpni.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
CC ice_dcb.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC ice_fdir.o
CC ice_ethdev.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC ice_rxtx.o
CC ixgbe_mbx.o
CC ixgbe_rxtx.o
CC hinic_pmd_ethdev.o
CC ixgbe_ethdev.o
CC i40e_dcb.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC nfp_nsp.o
CC fm10k_vf.o
CC hns3_fdir.o
CC hn_vf.o
CC ixgbe_fdir.o
CC hns3_intr.o
CC hns3_stats.o
CC mc/dpkg.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC mc/dpdmux.o
CC fm10k_api.o
== Build drivers/net/null
CC fm10k_rxtx_vec.o
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
== Build drivers/net/qede
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
== Build drivers/net/ring
LD bnxt_ethdev.o
CC nfp_nsp_cmds.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC i40e_ethdev.o
CC bnxt_filter.o
CC rte_eth_null.o
CC i40e_rxtx.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC octeontx_rxtx.o
CC nfp_nsp_eth.o
== Build drivers/net/sfc
CC otx2_rx.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC ice_rxtx_vec_avx2.o
CC base/vnic_rq.o
CC ecore_dev.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC ecore_hw.o
LD hinic_pmd_ethdev.o
CC hns3_regs.o
CC hinic_pmd_rx.o
CC sfc_ethdev.o
CC hinic_pmd_tx.o
CC sfc_kvargs.o
CC hns3_dcb.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC hns3_mp.o
CC ecore_cxt.o
CC bnxt_flow.o
AR librte_pmd_e1000.a
== Build drivers/net/tap
INSTALL-LIB librte_pmd_e1000.a
CC ixgbe_pf.o
CC octeontx_pkovf.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC ixgbe_flow.o
CC ixgbe_rxtx_vec_sse.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC nfp_net.o
CC octeontx_pkivf.o
CC enic_rxtx_vec_avx2.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC octeontx_bgx.o
CC octeontx_ethdev.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
LD octeontx_pkivf.o
== Build drivers/net/thunderx
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
CC rte_eth_tap.o
CC tap_flow.o
LD rte_eth_ring.o
CC tap_netlink.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC tap_tcmsgs.o
== Build drivers/net/vmxnet3
== Build drivers/net/kni
CC vdev_netvsc.o
CC nicvf_rxtx.o
CC nicvf_hw.o
CC tap_bpf_api.o
CC virtqueue.o
CC failsafe_ether.o
CC vmxnet3_rxtx.o
CC rte_eth_kni.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC tap_intr.o
== Build drivers/net/softnic
== Build drivers/net/vhost
CC vmxnet3_ethdev.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC ixgbe_ipsec.o
SYMLINK-FILE include/rte_eth_vhost.h
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_vhost.o
CC rte_eth_softnic.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
CC bnxt_hwrm.o
CC nicvf_mbox.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC nicvf_ethdev.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
== Build drivers/net/ifc
CC nicvf_bsvf.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
CC rte_eth_softnic_link.o
CC rte_eth_softnic_tm.o
AR librte_pmd_null.a
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
INSTALL-LIB librte_pmd_null.a
CC rte_eth_softnic_tap.o
LD vdev_netvsc.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
AR librte_pmd_vdev_netvsc.a
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC nicvf_svf.o
LD rte_eth_kni.o
LD sfc_ethdev.o
AR librte_pmd_kni.a
CC sfc.o
INSTALL-LIB librte_pmd_kni.a
CC sfc_mcdi.o
CC ifcvf_vdpa.o
CC ifcvf.o
CC ecore_l2.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC failsafe_flow.o
LD ice_ethdev.o
CC failsafe_intr.o
CC ice_generic_flow.o
CC ecore_sp_commands.o
CC ecore_init_fw_funcs.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC virtio_pci.o
CC virtio_rxtx.o
LD vmxnet3_ethdev.o
CC virtio_ethdev.o
CC ecore_spq.o
CC sfc_intr.o
CC sfc_ev.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD rte_eth_softnic.o
LD ixgbe_ethdev.o
CC sfc_port.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC ecore_init_ops.o
CC rte_eth_softnic_action.o
CC bnxt_ring.o
CC bnxt_rxq.o
CC rte_eth_softnic_pipeline.o
CC rte_eth_softnic_thread.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC rte_eth_softnic_cli.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC bnxt_rxr.o
CC bnxt_stats.o
CC bnxt_txq.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC ecore_mcp.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
CC sfc_rx.o
LD nicvf_ethdev.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC sfc_tx.o
CC bnxt_txr.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
CC sfc_tso.o
LD ifcvf_vdpa.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC virtio_rxtx_simple.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC ecore_int.o
LD rte_eth_vhost.o
CC ecore_dcbx.o
CC bcm_osal.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC conn.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC rte_pmd_ixgbe.o
CC ixgbe_tm.o
CC ixgbe_vf_representor.o
CC ecore_sriov.o
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
AR librte_pmd_ice.a
CC bnxt_vnic.o
INSTALL-LIB librte_pmd_ice.a
CC qede_rxtx.o
CC bnxt_irq.o
CC sfc_filter.o
CC bnxt_util.o
CC sfc_flow.o
CC sfc_dp.o
CC sfc_ef10_rx.o
CC sfc_ef10_essb_rx.o
CC qede_filter.o
CC sfc_ef10_tx.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC efx_bootcfg.o
CC otx2_tx.o
CC otx2_tm.o
CC otx2_rss.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC otx2_mac.o
CC otx2_ptp.o
CC i40e_rxtx_vec_sse.o
CC efx_crc32.o
CC i40e_ethdev_vf.o
CC virtio_rxtx_simple_sse.o
CC i40e_pf.o
AR librte_pmd_ixgbe.a
AR librte_pmd_vmxnet3_uio.a
CC efx_ev.o
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC otx2_flow.o
INSTALL-LIB librte_pmd_ixgbe.a
CC otx2_link.o
CC otx2_vlan.o
CC otx2_stats.o
CC otx2_lookup.o
CC efx_evb.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC otx2_ethdev.o
LD rte_eth_tap.o
CC otx2_flow_ctrl.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC otx2_flow_parse.o
CC i40e_fdir.o
CC i40e_flow.o
CC rte_pmd_i40e.o
CC i40e_tm.o
CC i40e_vf_representor.o
CC i40e_rxtx_vec_avx2.o
CC otx2_flow_utils.o
CC virtio_user/vhost_user.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
CC efx_filter.o
CC efx_hash.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
CC efx_intr.o
CC efx_lic.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC efx_mac.o
CC efx_mcdi.o
LD i40e_ethdev.o
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
LD virtio_user_ethdev.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx2
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC skeleton_eventdev.o
CC dpaa_eventdev.o
CC dpaa2_hw_dpcon.o
CC dsw_evdev.o
CC dsw_event.o
CC dpaa2_eventdev.o
CC dsw_xstats.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC sw_evdev.o
CC otx2_evdev_adptr.o
CC sw_evdev_worker.o
CC otx2_tim_evdev.o
CC sw_evdev_scheduler.o
CC otx2_evdev_selftest.o
CC sw_evdev_xstats.o
CC otx2_evdev_irq.o
CC sw_evdev_selftest.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC opdl_test.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD opdl_evdev.o
LD dpaa2_hw_dpcon.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
AR librte_pmd_octeontx_ssovf.a
LD dpaa2_eventdev.o
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC skeleton_rawdev.o
CC dpaa2_qdma.o
CC skeleton_rawdev_test.o
CC ntb.o
CC ntb_hw_intel.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/pdump
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC evt_main.o
CC main.o
CC evt_options.o
CC evt_test.o
CC main.o
CC cperf_ops.o
CC parser.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC cperf_options_parsing.o
CC test_order_common.o
CC main.o
CC test_bbdev.o
CC config.o
CC comp_perf_test_verify.o
CC test_order_queue.o
CC cmdline_test.o
CC cperf_test_vectors.o
CC commands.o
CC test_order_atq.o
CC init.o
CC test_perf_common.o
CC cperf_test_throughput.o
CC main.o
CC runtime.o
CC cperf_test_latency.o
CC pipeline_stub.o
CC test_perf_queue.o
CC cperf_test_pmd_cyclecount.o
CC comp_perf_test_benchmark.o
CC test_bbdev_perf.o
CC test_bbdev_vector.o
CC comp_perf_test_common.o
CC cperf_test_verify.o
CC main.o
CC testpmd.o
CC test_perf_atq.o
LD cmdline_test
CC pipeline_hash.o
CC commands.o
CC test.o
CC resource.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_resource.o
CC cperf_test_vector_parsing.o
LD testacl
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC test_prefetch.o
CC cperf_test_common.o
LD dpdk-procinfo
CC test_pipeline_atq.o
CC pipeline_acl.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
CC test_barrier.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
LD dpdk-pdump
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC parameters.o
CC cmdline.o
CC cmdline_flow.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC test_external_mem.o
CC config.o
CC iofwd.o
CC macfwd.o
CC test_rand_perf.o
CC test_ring.o
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC csumonly.o
CC icmpecho.o
CC noisy_vnf.o
CC bpf_cmd.o
CC util.o
CC softnicfwd.o
CC test_ring_perf.o
LD testpipeline
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_table_tables.o
CC test_table_ports.o
LD dpdk-test-eventdev
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
LD dpdk-test-crypto-perf
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_common.o
CC test_power_kvm_vm.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
INSTALL-APP dpdk-test-crypto-perf
CC test_pmd_ring.o
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testpmd
LD testbbdev
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 08:26:39 TestVxlan: Test Case test_vxlan_ipv4_detect Result PASSED:
17/10/2019 08:26:39 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:26:43 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Begin
17/10/2019 08:26:43 dut.10.240.176.196:
17/10/2019 08:26:43 tester:
17/10/2019 08:26:43 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
17/10/2019 08:26:55 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:26:55 dut.10.240.176.196: vlan set filter off 0
17/10/2019 08:26:55 dut.10.240.176.196: vlan set filter off 0
17/10/2019 08:26:55 dut.10.240.176.196: set fwd csum
17/10/2019 08:26:55 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
17/10/2019 08:26:55 dut.10.240.176.196: port stop all
17/10/2019 08:26:55 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:26:55 dut.10.240.176.196: csum set outer-ip hw 1
17/10/2019 08:26:56 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:26:56 dut.10.240.176.196: port start all
17/10/2019 08:26:56 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:26:56 dut.10.240.176.196: port stop all
17/10/2019 08:26:56 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:26:56 dut.10.240.176.196: csum set udp hw 1
17/10/2019 08:26:56 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:26:56 dut.10.240.176.196: port start all
17/10/2019 08:26:56 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:26:56 dut.10.240.176.196: port stop all
17/10/2019 08:26:57 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:26:57 dut.10.240.176.196: csum set tcp hw 1
17/10/2019 08:26:57 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:26:57 dut.10.240.176.196: port start all
17/10/2019 08:26:57 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:26:57 dut.10.240.176.196: port stop all
17/10/2019 08:26:57 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:26:57 dut.10.240.176.196: csum set sctp hw 1
17/10/2019 08:26:57 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:26:57 dut.10.240.176.196: port start all
17/10/2019 08:26:58 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:26:58 dut.10.240.176.196: csum parse-tunnel on 1
17/10/2019 08:26:58 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
17/10/2019 08:26:58 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:26:58 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:27:03 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:27:03 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:27:08 dut.10.240.176.196: port stop all
17/10/2019 08:27:08 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:27:08 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:27:08 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:27:08 dut.10.240.176.196: port start all
17/10/2019 08:27:09 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:27:09 dut.10.240.176.196: port stop all
17/10/2019 08:27:09 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:27:09 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:27:09 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:27:09 dut.10.240.176.196: port start all
17/10/2019 08:27:09 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:27:10 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:27:10 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:27:10 dut.10.240.176.196: start
17/10/2019 08:27:11 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:27:11 tester: ls -d /tmp/tester/
17/10/2019 08:27:11 tester: /tmp/tester/
17/10/2019 08:27:11 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:27:11 tester:
17/10/2019 08:27:16 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272036.53 root@10.240.176.173:/tmp/tester/
17/10/2019 08:27:18 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272036.53 root@10.240.176.173:/tmp/tester/
17/10/2019 08:27:19 tester: python /tmp/tester/scapy_ens160f0.cmd1571272036.53
17/10/2019 08:27:20 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:27:29 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:27:29 dut.10.240.176.196: stop
17/10/2019 08:27:29 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:27:29 dut.10.240.176.196: port stop all
17/10/2019 08:27:30 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:27:30 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:27:30 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:27:30 dut.10.240.176.196: port start all
17/10/2019 08:27:30 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:27:30 dut.10.240.176.196: port stop all
17/10/2019 08:27:31 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:27:31 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:27:31 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:27:31 dut.10.240.176.196: port start all
17/10/2019 08:27:31 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:27:32 TestVxlan: chksums_ref{}
17/10/2019 08:27:32 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:27:32 dut.10.240.176.196: start
17/10/2019 08:27:32 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:27:32 tester: ls -d /tmp/tester/
17/10/2019 08:27:32 tester: /tmp/tester/
17/10/2019 08:27:32 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:27:33 tester:
17/10/2019 08:27:38 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272058.11 root@10.240.176.173:/tmp/tester/
17/10/2019 08:27:39 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272058.11 root@10.240.176.173:/tmp/tester/
17/10/2019 08:27:40 tester: python /tmp/tester/scapy_ens160f0.cmd1571272058.11
17/10/2019 08:27:41 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:27:51 TestVxlan: chksums{}
17/10/2019 08:27:51 dut.10.240.176.196: stop
17/10/2019 08:27:51 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:27:51 dut.10.240.176.196: port stop all
17/10/2019 08:27:51 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:27:51 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:27:51 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:27:51 dut.10.240.176.196: port start all
17/10/2019 08:27:52 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:27:52 dut.10.240.176.196: port stop all
17/10/2019 08:27:52 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:27:52 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:27:52 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:27:52 dut.10.240.176.196: port start all
17/10/2019 08:27:52 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:27:53 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:27:53 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_ip_invalid = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:27:53 dut.10.240.176.196: start
17/10/2019 08:27:53 dut.10.240.176.196: start
Port 1: link state change event
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:27:53 tester: ls -d /tmp/tester/
17/10/2019 08:27:54 tester: /tmp/tester/
17/10/2019 08:27:54 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:27:54 tester:
17/10/2019 08:27:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272079.3 root@10.240.176.173:/tmp/tester/
17/10/2019 08:28:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272079.3 root@10.240.176.173:/tmp/tester/
17/10/2019 08:28:02 tester: python /tmp/tester/scapy_ens160f0.cmd1571272079.3
17/10/2019 08:28:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=6473)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:28:12 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:28:12 dut.10.240.176.196: stop
17/10/2019 08:28:12 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:28:12 dut.10.240.176.196: port stop all
17/10/2019 08:28:12 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:28:12 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:28:12 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:28:12 dut.10.240.176.196: port start all
17/10/2019 08:28:13 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:28:13 dut.10.240.176.196: port stop all
17/10/2019 08:28:13 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:28:13 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:28:13 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:28:13 dut.10.240.176.196: port start all
17/10/2019 08:28:13 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:28:14 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:28:14 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:28:14 dut.10.240.176.196: start
17/10/2019 08:28:15 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:28:15 tester: ls -d /tmp/tester/
17/10/2019 08:28:15 tester: /tmp/tester/
17/10/2019 08:28:15 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:28:15 tester:
17/10/2019 08:28:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272100.48 root@10.240.176.173:/tmp/tester/
17/10/2019 08:28:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272100.48 root@10.240.176.173:/tmp/tester/
17/10/2019 08:28:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571272100.48
17/10/2019 08:28:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:28:33 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:28:33 dut.10.240.176.196: stop
17/10/2019 08:28:33 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:28:33 dut.10.240.176.196: port stop all
17/10/2019 08:28:34 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:28:34 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:28:34 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:28:34 dut.10.240.176.196: port start all
17/10/2019 08:28:34 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:28:34 dut.10.240.176.196: port stop all
17/10/2019 08:28:34 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:28:34 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:28:34 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:28:34 dut.10.240.176.196: port start all
17/10/2019 08:28:35 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:28:36 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:28:36 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:28:36 dut.10.240.176.196: start
17/10/2019 08:28:36 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:28:36 tester: ls -d /tmp/tester/
17/10/2019 08:28:36 tester: /tmp/tester/
17/10/2019 08:28:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:28:36 tester:
17/10/2019 08:28:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272121.61 root@10.240.176.173:/tmp/tester/
17/10/2019 08:28:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272121.61 root@10.240.176.173:/tmp/tester/
17/10/2019 08:28:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571272121.61
17/10/2019 08:28:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:28:54 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:28:54 dut.10.240.176.196: stop
17/10/2019 08:28:54 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:28:54 dut.10.240.176.196: port stop all
17/10/2019 08:28:55 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:28:55 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:28:55 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:28:55 dut.10.240.176.196: port start all
17/10/2019 08:28:55 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:28:55 dut.10.240.176.196: port stop all
17/10/2019 08:28:55 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:28:55 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:28:56 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:28:56 dut.10.240.176.196: port start all
17/10/2019 08:28:56 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:28:57 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:28:57 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:28:57 dut.10.240.176.196: start
17/10/2019 08:28:57 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:28:57 tester: ls -d /tmp/tester/
17/10/2019 08:28:57 tester: /tmp/tester/
17/10/2019 08:28:57 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:28:57 tester:
17/10/2019 08:29:02 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272142.84 root@10.240.176.173:/tmp/tester/
17/10/2019 08:29:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272142.84 root@10.240.176.173:/tmp/tester/
17/10/2019 08:29:05 tester: python /tmp/tester/scapy_ens160f0.cmd1571272142.84
17/10/2019 08:29:06 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:29:16 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:29:16 dut.10.240.176.196: stop
17/10/2019 08:29:16 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:29:16 dut.10.240.176.196: port stop all
17/10/2019 08:29:16 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:29:16 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:29:16 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:29:16 dut.10.240.176.196: port start all
17/10/2019 08:29:16 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:29:16 dut.10.240.176.196: port stop all
17/10/2019 08:29:17 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:29:17 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:29:17 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:29:17 dut.10.240.176.196: port start all
17/10/2019 08:29:17 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:29:18 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:29:18 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:29:18 dut.10.240.176.196: start
17/10/2019 08:29:18 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:29:18 tester: ls -d /tmp/tester/
17/10/2019 08:29:18 tester: /tmp/tester/
17/10/2019 08:29:18 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:29:18 tester:
17/10/2019 08:29:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272163.99 root@10.240.176.173:/tmp/tester/
17/10/2019 08:29:25 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272163.99 root@10.240.176.173:/tmp/tester/
17/10/2019 08:29:26 tester: python /tmp/tester/scapy_ens160f0.cmd1571272163.99
17/10/2019 08:29:27 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:29:37 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:29:37 dut.10.240.176.196: stop
17/10/2019 08:29:37 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:29:37 dut.10.240.176.196: port stop all
17/10/2019 08:29:37 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:29:37 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:29:37 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:29:37 dut.10.240.176.196: port start all
17/10/2019 08:29:37 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:29:37 dut.10.240.176.196: port stop all
17/10/2019 08:29:38 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:29:38 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:29:38 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:29:38 dut.10.240.176.196: port start all
17/10/2019 08:29:38 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:29:39 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:29:39 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
17/10/2019 08:29:39 dut.10.240.176.196: start
17/10/2019 08:29:39 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:29:39 tester: ls -d /tmp/tester/
17/10/2019 08:29:40 tester: /tmp/tester/
17/10/2019 08:29:40 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:29:40 tester:
17/10/2019 08:29:45 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272185.23 root@10.240.176.173:/tmp/tester/
17/10/2019 08:29:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272185.23 root@10.240.176.173:/tmp/tester/
17/10/2019 08:29:48 tester: python /tmp/tester/scapy_ens160f0.cmd1571272185.23
17/10/2019 08:29:48 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:29:58 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:29:58 dut.10.240.176.196: stop
17/10/2019 08:29:58 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:29:58 dut.10.240.176.196: port stop all
17/10/2019 08:29:58 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:29:58 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:29:58 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:29:58 dut.10.240.176.196: port start all
17/10/2019 08:29:59 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:29:59 dut.10.240.176.196: port stop all
17/10/2019 08:29:59 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:29:59 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:29:59 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:29:59 dut.10.240.176.196: port start all
17/10/2019 08:29:59 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:30:00 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:30:00 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
17/10/2019 08:30:00 dut.10.240.176.196: start
17/10/2019 08:30:00 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:30:00 tester: ls -d /tmp/tester/
17/10/2019 08:30:01 tester: /tmp/tester/
17/10/2019 08:30:01 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:30:01 tester:
17/10/2019 08:30:06 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272206.37 root@10.240.176.173:/tmp/tester/
17/10/2019 08:30:07 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272206.37 root@10.240.176.173:/tmp/tester/
17/10/2019 08:30:09 tester: python /tmp/tester/scapy_ens160f0.cmd1571272206.37
17/10/2019 08:30:09 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=80, fl=0, tc=0)/UDP(dport=4789, sport=63, len=80, chksum=437)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:30:19 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
17/10/2019 08:30:19 dut.10.240.176.196: stop
17/10/2019 08:30:19 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:30:19 dut.10.240.176.196: port stop all
17/10/2019 08:30:19 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
17/10/2019 08:30:19 dut.10.240.176.196: csum set outer-ip sw 0
17/10/2019 08:30:20 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:30:20 dut.10.240.176.196: port start all
17/10/2019 08:30:20 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:30:20 dut.10.240.176.196: port stop all
17/10/2019 08:30:20 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
17/10/2019 08:30:20 dut.10.240.176.196: csum set outer-ip sw 1
17/10/2019 08:30:20 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
17/10/2019 08:30:20 dut.10.240.176.196: port start all
17/10/2019 08:30:20 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:30:21 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:30:21 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
17/10/2019 08:30:21 dut.10.240.176.196: start
17/10/2019 08:30:22 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
17/10/2019 08:30:22 tester: ls -d /tmp/tester/
17/10/2019 08:30:22 tester: /tmp/tester/
17/10/2019 08:30:22 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
17/10/2019 08:30:22 tester:
17/10/2019 08:30:27 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272227.54 root@10.240.176.173:/tmp/tester/
17/10/2019 08:30:29 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272227.54 root@10.240.176.173:/tmp/tester/
17/10/2019 08:30:30 tester: python /tmp/tester/scapy_ens160f0.cmd1571272227.54
17/10/2019 08:30:31 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=92, fl=0, tc=0)/UDP(dport=4789, sport=63, len=92, chksum=37306)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:30:40 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
17/10/2019 08:30:40 dut.10.240.176.196: stop
17/10/2019 08:30:40 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:30:40 dut.10.240.176.196: quit
17/10/2019 08:30:44 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:30:44 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Result PASSED:
17/10/2019 08:30:44 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:30:47 TestVxlan: Test Case test_vxlan_ipv6_detect Begin
17/10/2019 08:30:47 dut.10.240.176.196:
17/10/2019 08:30:47 tester:
17/10/2019 08:30:47 dut.10.240.176.196: cat config/common_base
17/10/2019 08:30:48 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 08:30:48 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
17/10/2019 08:30:48 dut.10.240.176.196:
17/10/2019 08:30:48 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 08:30:48 dut.10.240.176.196:
17/10/2019 08:30:48 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 08:30:48 dut.10.240.176.196:
17/10/2019 08:30:48 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 08:30:48 dut.10.240.176.196:
17/10/2019 08:30:48 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 08:30:48 dut.10.240.176.196:
17/10/2019 08:30:48 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 08:30:48 dut.10.240.176.196:
17/10/2019 08:30:48 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 08:30:49 dut.10.240.176.196:
17/10/2019 08:30:49 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 08:32:52 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_log.o
CC eal_thread.o
CC eal_vfio.o
CC eal_memalloc.o
CC eal_vfio_mp_sync.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_dev.o
CC eal_alarm.o
CC eal_common_timer.o
CC eal_common_lcore.o
CC eal_common_log.o
CC eal_common_memzone.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_cfgfile
== Build lib/librte_timer
== Build lib/librte_meter
== Build lib/librte_jobstats
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_metrics.h
CC rte_metrics.o
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_stack_lf.h
CC rte_meter.o
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_jobstats.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_pci.o
CC rte_cfgfile.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
CC rte_stack.o
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_stack_std.o
CC rte_stack_lf.o
CC rte_rcu_qsbr.o
CC rte_ring.o
SYMLINK-FILE include/rte_timer.h
CC rte_timer.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_avx2.o
CC acl_run_sse.o
AR librte_stack.a
AR librte_pci.a
INSTALL-LIB librte_stack.a
INSTALL-LIB librte_pci.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_mempool.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_reorder
== Build lib/librte_compressdev
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_net.o
CC rte_comp.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_member
== Build lib/librte_lpm
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
AR librte_compressdev.a
SYMLINK-FILE include/cmdline.h
CC rte_sched.o
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
CC rte_red.o
CC rte_approx.o
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC cmdline.o
SYMLINK-FILE include/rte_ethdev.h
CC cmdline_cirbuf.o
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
CC cmdline_parse.o
SYMLINK-FILE include/rte_eth_ctrl.h
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
SYMLINK-FILE include/rte_dev_info.h
CC cmdline_parse_num.o
SYMLINK-FILE include/rte_flow.h
CC cmdline_parse_string.o
SYMLINK-FILE include/rte_flow_driver.h
CC cmdline_rdline.o
CC cmdline_vt100.o
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
CC cmdline_socket.o
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
CC cmdline_parse_portlist.o
CC ethdev_private.o
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC rte_tm.o
CC rte_mtr.o
CC ethdev_profile.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_vhost
== Build lib/librte_rawdev
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_latencystats
== Build lib/librte_bitratestats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_security.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC rte_gro.o
CC gro_tcp4.o
CC rte_rawdev.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC rte_pdump.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_gso.h
CC rte_kni.o
CC rte_latencystats.o
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_bitrate.o
CC rte_gso.o
CC gso_common.o
SYMLINK-FILE include/rte_ip_frag.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
CC rte_distributor_v20.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC gso_tcp4.o
CC fd_man.o
CC rte_ipv4_fragmentation.o
CC gso_tunnel_tcp4.o
CC rte_distributor.o
CC rte_ipv6_fragmentation.o
CC iotlb.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC socket.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC rte_ipv4_reassembly.o
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_ipv6_reassembly.o
CC bpf.o
CC rte_eventdev.o
CC vhost.o
CC rte_ip_frag_common.o
CC bpf_exec.o
CC ip_frag_internal.o
CC gso_udp4.o
CC bpf_load.o
CC vhost_user.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC virtio_net.o
CC bpf_pkt.o
CC vdpa.o
CC rte_event_timer_adapter.o
CC vhost_crypto.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
CC bpf_validate.o
CC bpf_jit_x86.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
SYMLINK-FILE include/rte_pipeline.h
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
CC otx2_dev.o
CC octeontx_mbox.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC cpt_pmd_ops_helper.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_pci.h
CC linux/pci.o
CC linux/pci_uio.o
CC linux/pci_vfio.o
CC pci_params.o
CC pci_common.o
CC pci_common_uio.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vdev_params.o
CC dpaa_bus.o
CC base/fman/of.o
CC base/fman/fman.o
CC base/fman/netcfg_layer.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC base/fman/fman_hw.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC qbman/qbman_portal.o
CC mc/dpmng.o
CC linux/vmbus_bus.o
CC mc/mc_sys.o
CC base/qbman/bman_driver.o
CC qbman/qbman_debug.o
CC linux/vmbus_uio.o
CC mc/dpbp.o
CC base/qbman/qman.o
CC mc/dpio.o
CC vmbus_common.o
CC base/qbman/qman_driver.o
CC vmbus_channel.o
CC base/qbman/dpaa_alloc.o
CC mc/dpcon.o
CC vmbus_bufring.o
CC base/qbman/dpaa_sys.o
CC mc/dpci.o
CC mc/dpdmai.o
Building modules, stage 2.
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC vmbus_common_uio.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
MODPOST 1 modules
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
LD portal/dpaa2_hw_dpci.o
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC dpaa_mempool.o
CC rte_mempool_bucket.o
CC rte_mempool_ring.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC rte_mempool_stack.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
LD otx2_mempool.o
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_octeontx2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/compress/octeontx
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/baseband/null
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/ena
== Build drivers/net/failsafe
CC qat_comp.o
== Build drivers/net/fm10k
== Build drivers/crypto/octeontx
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/crypto/scheduler
CC qat_comp_pmd.o
== Build drivers/crypto/null
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/net/liquidio
== Build drivers/net/memif
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
CC rte_eth_af_packet.o
CC rte_eth_memif.o
SYMLINK-FILE include/fpga_lte_fec.h
CC otx_zip_pmd.o
CC ark_ddm.o
CC bbdev_turbo_software.o
CC atl_rxtx.o
CC nitrox_device.o
SYMLINK-FILE include/rte_eth_bond.h
CC enetc_ethdev.o
CC bbdev_null.o
SYMLINK-FILE include/rte_avp_common.h
CC ena_ethdev.o
CC null_crypto_pmd.o
CC caam_jr.o
CC otx_cryptodev.o
CC hns3_ethdev.o
CC lio_ethdev.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC fpga_lte_fec.o
CC iavf_adminq.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC virtqueue.o
CC axgbe_ethdev.o
CC ipn3ke_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
SYMLINK-FILE include/rte_avp_fifo.h
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC failsafe.o
CC enic_ethdev.o
CC dpaa_sec.o
CC dpaa2_sec_dpseci.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC avp_ethdev.o
CC dpaa_ethdev.o
CC rte_eth_bond_api.o
CC hinic_pmd_api_cmd.o
CC base/dpaa2_hw_dpni.o
CC scheduler_pmd.o
CC fm10k_ethdev.o
CC cxgbe_ethdev.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ice.h
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ice_controlq.o
CC ixgbe_common.o
CC ark_ethdev.o
CC hinic_pmd_cfg.o
CC e1000_82540.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD otx_cryptodev.o
LD nitrox_device.o
CC qat_device.o
CC otx_cryptodev_capabilities.o
CC nitrox_hal.o
CC otx_cryptodev_hw_access.o
CC e1000_82541.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC nitrox_logs.o
CC dpaa2_rxtx.o
LD failsafe.o
CC scheduler_pmd_ops.o
CC failsafe_args.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC nitrox_sym.o
LD axgbe_ethdev.o
LD bbdev_null.o
CC axgbe_dev.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC axgbe_mdio.o
LD ipn3ke_ethdev.o
CC virtio_pci.o
CC ipn3ke_representor.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
CC rte_eth_bond_pmd.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD otx_zip_pmd.o
LD enic_ethdev.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC otx_zip.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC enic_main.o
CC e1000_82542.o
LD ark_ethdev.o
LD bbdev_turbo_software.o
CC hinic_pmd_cmdq.o
CC ark_ethdev_rx.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC ark_ethdev_tx.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
LD dpaa_ethdev.o
LD enetc_ethdev.o
CC ark_mpu.o
CC dpaa_rxtx.o
CC enetc_rxtx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC e1000_82543.o
CC lio_rxtx.o
LD qat_device.o
LD fpga_lte_fec.o
CC otx_cryptodev_mbox.o
CC qat_common.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC qat_logs.o
CC ark_pktchkr.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
CC ark_pktdir.o
LD rte_eth_af_packet.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC lio_23xx_vf.o
CC memif_socket.o
CC atl_ethdev.o
CC rte_cryptodev_scheduler.o
CC virtio_rxtx.o
CC failsafe_eal.o
CC ixgbe_82598.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC lio_mbox.o
CC e1000_82571.o
CC hinic_pmd_eqs.o
CC ipn3ke_tm.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC ipn3ke_flow.o
== Build drivers/net/netvsc
CC nitrox_sym_capabilities.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
CC qat_qp.o
CC otx_cryptodev_ops.o
CC axgbe_phy_impl.o
CC iavf_common.o
CC ixgbe_82599.o
CC i40e_common.o
CC i40e_diag.o
CC hn_ethdev.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
AR librte_pmd_enetc.a
CC e1000_82575.o
LD fm10k_ethdev.o
INSTALL-LIB librte_pmd_enetc.a
CC i40e_hmc.o
CC fm10k_rxtx.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
CC failsafe_ops.o
CC hns3_ethdev_vf.o
== Build drivers/net/nfp
CC ice_common.o
CC failsafe_rxtx.o
CC ark_pktgen.o
CC nitrox_sym_reqmgr.o
CC fm10k_pf.o
CC hns3_cmd.o
CC hinic_pmd_hwdev.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC hinic_pmd_hwif.o
CC nfp_cppcore.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
PMDINFO cxgbevf_ethdev.o.pmd.c
LD ena_ethdev.o
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC hinic_pmd_mgmt.o
CC ena_com.o
CC cxgbe_main.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC ixgbe_x540.o
CC atl_hw_regs.o
CC ena_eth_com.o
CC virtio_cryptodev.o
CC i40e_lan_hmc.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC i40e_nvm.o
CC enic_rxtx.o
AR librte_pmd_ipn3ke.a
CC enic_clsf.o
INSTALL-LIB librte_pmd_ipn3ke.a
CC enic_res.o
CC hw_atl_utils.o
CC e1000_i210.o
CC iavf_ethdev.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC axgbe_i2c.o
CC hn_rxtx.o
CC ixgbe_x550.o
CC ixgbe_phy.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC ark_rqp.o
CC ark_udm.o
CC failsafe_ether.o
CC nitrox_qp.o
CC failsafe_flow.o
CC dpaa2_ethdev.o
CC hn_rndis.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
CC e1000_api.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC e1000_ich8lan.o
CC e1000_logs.o
AR librte_pmd_ark.a
CC hn_nvs.o
INSTALL-LIB librte_pmd_ark.a
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC hn_vf.o
LD hns3_ethdev_vf.o
CC scheduler_roundrobin.o
CC hns3_mbx.o
CC rte_eth_bond_args.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC rte_eth_bond_8023ad.o
CC nfp_cpp_pcie_ops.o
CC hinic_pmd_niccfg.o
CC i40e_dcb.o
CC i40e_ethdev.o
CC axgbe_rxtx.o
CC axgbe_rxtx_vec_sse.o
CC hw_atl_llh.o
CC enic_flow.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC i40e_rxtx.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
CC base/vnic_cq.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD virtio_cryptodev.o
CC base/vnic_wq.o
LD caam_jr.o
CC cxgbevf_main.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC caam_jr_capabilities.o
CC sge.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC caam_jr_hw.o
== Build drivers/net/bnxt
== Build drivers/net/null
CC caam_jr_uio.o
== Build drivers/net/octeontx
CC hns3_rxtx.o
CC scheduler_pkt_size_distr.o
CC hw_atl_utils_fw2x.o
CC hw_atl_b0.o
CC hns3_rss.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC fm10k_tlv.o
CC rte_eth_null.o
CC ixgbe_api.o
CC octeontx_rxtx.o
CC scheduler_failover.o
CC bnxt_ethdev.o
CC hinic_pmd_nicio.o
CC base/vnic_dev.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC nfp_mutex.o
CC nfp_resource.o
CC iavf_vchnl.o
CC dpaa2_flow.o
CC hns3_flow.o
CC fm10k_common.o
CC hns3_fdir.o
CC e1000_mac.o
CC hns3_intr.o
CC ice_sched.o
CC e1000_manage.o
CC e1000_mbx.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC hns3_stats.o
CC ixgbe_vf.o
CC ixgbe_hv_vf.o
CC fm10k_mbx.o
CC fm10k_vf.o
CC fm10k_api.o
CC fm10k_rxtx_vec.o
CC hns3_regs.o
CC octeontx_pkovf.o
CC octeontx_pkivf.o
CC base/vnic_intr.o
CC rte_pmd_atlantic.o
CC hns3_dcb.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
LD octeontx_pkivf.o
CC iavf_rxtx.o
CC ixgbe_dcb.o
CC nfp_crc.o
CC octeontx_bgx.o
CC scheduler_multicore.o
CC octeontx_ethdev.o
CC e1000_nvm.o
CC e1000_osdep.o
CC hinic_pmd_wq.o
CC ixgbe_dcb_82599.o
CC nfp_mip.o
CC failsafe_intr.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC nfp_nffw.o
LD iavf_ethdev.o
CC nfp_hwinfo.o
CC i40e_ethdev_vf.o
CC i40e_pf.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC i40e_fdir.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
== Build drivers/net/octeontx2
== Build drivers/net/qede
== Build drivers/net/ring
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC iavf_rxtx_vec_sse.o
LD dpaa2_sec_dpseci.o
CC mc/dpseci.o
CC e1000_phy.o
== Build drivers/net/sfc
CC nfp_rtsym.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC hns3_mp.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC bnxt_filter.o
CC rte_eth_bond_alb.o
CC e1000_vf.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC ixgbe_dcb_82598.o
CC hinic_pmd_ethdev.o
LD octeontx_ethdev.o
CC otx2_rx.o
AR librte_pmd_octeontx.a
CC otx2_tx.o
INSTALL-LIB librte_pmd_octeontx.a
CC nfp_nsp.o
CC dpaa2_mux.o
CC igb_ethdev.o
SYMLINK-FILE include/rte_eth_ring.h
AR librte_pmd_dpaa2_sec.a
CC rte_eth_ring.o
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC igb_rxtx.o
CC base/vnic_rq.o
CC enic_rxtx_vec_avx2.o
CC ecore_dev.o
CC ecore_hw.o
CC sfc_ethdev.o
CC sfc_kvargs.o
CC ixgbe_mbx.o
CC nfp_nsp_cmds.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC sfc.o
CC ixgbe_rxtx.o
CC ixgbe_ethdev.o
AR librte_pmd_hns3.a
CC rte_eth_bond_flow.o
INSTALL-LIB librte_pmd_hns3.a
CC ixgbe_fdir.o
== Build drivers/net/tap
== Build drivers/net/thunderx
== Build drivers/net/vdev_netvsc
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD rte_eth_null.o
LD dpaa2_mux.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC otx2_tm.o
== Build drivers/net/virtio
CC dpaa2_sparser.o
CC igb_pf.o
CC hinic_pmd_rx.o
CC hinic_pmd_tx.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC igb_flow.o
LD bnxt_ethdev.o
CC bnxt_flow.o
CC nicvf_rxtx.o
CC vdev_netvsc.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC virtqueue.o
CC virtio_pci.o
CC rte_eth_tap.o
CC nfp_nsp_eth.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC i40e_flow.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
CC nfp_net.o
CC tap_flow.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
AR librte_pmd_bond.a
CC bnxt_hwrm.o
INSTALL-LIB librte_pmd_bond.a
CC rte_pmd_i40e.o
CC mc/dpni.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC mc/dpkg.o
CC virtio_rxtx.o
CC virtio_ethdev.o
CC i40e_tm.o
CC i40e_vf_representor.o
CC mc/dpdmux.o
CC em_ethdev.o
CC em_rxtx.o
CC ecore_cxt.o
CC ecore_l2.o
CC ixgbe_pf.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC ixgbe_flow.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC sfc_mcdi.o
CC tap_netlink.o
CC tap_tcmsgs.o
CC ice_switch.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
== Build drivers/net/vmxnet3
== Build drivers/net/kni
CC virtio_rxtx_simple.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC virtio_rxtx_simple_sse.o
CC virtio_user/vhost_user.o
CC tap_bpf_api.o
AR librte_pmd_iavf.a
CC virtio_user/vhost_kernel.o
INSTALL-LIB librte_pmd_iavf.a
CC virtio_user/vhost_kernel_tap.o
CC tap_intr.o
CC vmxnet3_rxtx.o
CC rte_eth_kni.o
CC bnxt_ring.o
CC bnxt_rxq.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC bnxt_rxr.o
CC bnxt_stats.o
CC nicvf_hw.o
CC sfc_intr.o
CC sfc_ev.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC nicvf_mbox.o
CC cxgbe_filter.o
CC cxgbe_flow.o
CC sfc_port.o
CC ixgbe_rxtx_vec_sse.o
CC sfc_rx.o
CC sfc_tx.o
== Build drivers/net/softnic
== Build drivers/net/vhost
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
LD rte_eth_kni.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC virtio_user/virtio_user_dev.o
CC nicvf_ethdev.o
CC virtio_user_ethdev.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC sfc_tso.o
CC sfc_filter.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC sfc_flow.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC ixgbe_ipsec.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC rte_pmd_ixgbe.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC sfc_dp.o
== Build drivers/net/ifc
CC sfc_ef10_rx.o
CC ixgbe_tm.o
CC ixgbe_vf_representor.o
CC bnxt_txq.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC t4_hw.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC clip_tbl.o
LD i40e_ethdev.o
CC sfc_ef10_essb_rx.o
CC ifcvf_vdpa.o
CC bnxt_txr.o
AR librte_pmd_i40e.a
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_i40e.a
INSTALL-LIB librte_pmd_hinic.a
CC ifcvf.o
CC sfc_ef10_tx.o
CC nicvf_bsvf.o
CC nicvf_svf.o
CC ecore_sp_commands.o
CC rte_eth_softnic_mempool.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC mps_tcam.o
CC ecore_init_fw_funcs.o
LD virtio_user_ethdev.o
CC ecore_spq.o
CC ecore_init_ops.o
CC ecore_mcp.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC ecore_int.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
CC rte_eth_softnic_swq.o
CC rte_eth_softnic_link.o
CC efx_bootcfg.o
CC efx_crc32.o
CC efx_ev.o
CC efx_evb.o
CC otx2_rss.o
CC ecore_dcbx.o
CC bnxt_vnic.o
CC bnxt_irq.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
CC bnxt_util.o
LD nicvf_ethdev.o
AR librte_pmd_thunderx_nicvf.a
CC otx2_mac.o
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC bcm_osal.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC otx2_ptp.o
CC otx2_flow.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
CC otx2_link.o
LD ifcvf_vdpa.o
AR librte_pmd_ifc.a
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
INSTALL-LIB librte_pmd_ifc.a
CC otx2_vlan.o
LD rte_eth_vhost.o
CC otx2_stats.o
CC l2t.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
CC efx_filter.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
LD rte_eth_tap.o
CC efx_hash.o
CC efx_intr.o
CC efx_lic.o
CC rte_eth_softnic_tm.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
CC rte_eth_softnic_pipeline.o
CC ecore_sriov.o
CC otx2_lookup.o
CC rte_eth_softnic_thread.o
CC rte_eth_softnic_cli.o
CC rte_eth_softnic_flow.o
CC efx_mac.o
CC efx_mcdi.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
CC otx2_flow_parse.o
CC efx_mon.o
CC otx2_flow_utils.o
CC rte_eth_softnic_meter.o
CC otx2_ethdev_irq.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC rte_eth_softnic_cryptodev.o
CC qede_rxtx.o
CC qede_filter.o
CC otx2_ethdev_ops.o
CC vmxnet3_ethdev.o
CC t4vf_hw.o
CC parser.o
CC conn.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
CC efx_nic.o
CC ice_nvm.o
CC ice_flex_pipe.o
CC ice_flow.o
CC ice_dcb.o
CC ice_fdir.o
CC ice_ethdev.o
CC efx_nvram.o
CC efx_phy.o
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC ice_switch_filter.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC efx_vpd.o
CC mcdi_mon.o
AR librte_pmd_bnxt.a
CC siena_mac.o
INSTALL-LIB librte_pmd_bnxt.a
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
LD vmxnet3_ethdev.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
AR librte_pmd_vmxnet3_uio.a
AR librte_pmd_virtio.a
CC ef10_ev.o
INSTALL-LIB librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_virtio.a
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
AR librte_pmd_octeontx2.a
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_octeontx2.a
CC hunt_nic.o
CC medford_nic.o
LD qede_ethdev.o
CC medford2_nic.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC skeleton_eventdev.o
CC dpaa_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC dsw_evdev.o
CC dsw_event.o
CC otx2_tim_worker.o
CC dsw_xstats.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC opdl_evdev_xstats.o
CC opdl_test.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa_eventdev.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
CC ntb.o
CC ntb_hw_intel.o
CC otx2_dpi_rawdev.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC otx2_dpi_msg.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC otx2_dpi_test.o
CC dpaa2_cmdif.o
CC dpaa2_qdma.o
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/pdump
== Build app/test-acl
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC cmdline_test.o
CC commands.o
CC comp_perf_test_verify.o
CC main.o
CC config.o
CC init.o
CC runtime.o
CC comp_perf_test_benchmark.o
CC pipeline_stub.o
CC comp_perf_test_common.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC main.o
CC test_bbdev.o
CC main.o
CC evt_main.o
CC evt_options.o
CC pipeline_lpm_ipv6.o
CC pipeline_acl.o
CC test_bbdev_perf.o
CC test_bbdev_vector.o
CC evt_test.o
CC parser.o
CC test_order_common.o
CC test_order_queue.o
CC test_order_atq.o
CC main.o
CC cperf_ops.o
CC test_perf_common.o
CC testpmd.o
CC parameters.o
CC test_perf_queue.o
CC cperf_options_parsing.o
CC cperf_test_vectors.o
LD cmdline_test
CC test_perf_atq.o
CC commands.o
CC test.o
CC resource.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
LD testacl
CC test_pipeline_atq.o
CC test_resource.o
CC cmdline.o
CC test_prefetch.o
CC test_byteorder.o
LD dpdk-procinfo
CC test_per_lcore.o
CC test_atomic.o
CC cmdline_flow.o
CC cperf_test_throughput.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC config.o
CC test_barrier.o
CC test_malloc.o
CC cperf_test_verify.o
CC iofwd.o
CC macfwd.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_cycles.o
CC test_mcslock.o
LD dpdk-pdump
CC macswap.o
LD testpipeline
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC csumonly.o
CC icmpecho.o
INSTALL-APP dpdk-procinfo
CC noisy_vnf.o
INSTALL-MAP dpdk-procinfo.map
CC bpf_cmd.o
CC util.o
CC softnicfwd.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
LD dpdk-test-eventdev
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_rwlock.o
CC test_stack.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
LD dpdk-test-crypto-perf
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 08:32:52 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
17/10/2019 08:33:04 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
17/10/2019 08:33:04 dut.10.240.176.196: set fwd rxonly
17/10/2019 08:33:04 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
17/10/2019 08:33:04 dut.10.240.176.196: set verbose 1
17/10/2019 08:33:04 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
17/10/2019 08:33:04 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:33:04 dut.10.240.176.196: rx_vxlan_port add 4789 0
17/10/2019 08:33:09 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:33:09 dut.10.240.176.196: rx_vxlan_port add 4789 1
17/10/2019 08:33:14 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
17/10/2019 08:33:14 dut.10.240.176.196: start
17/10/2019 08:33:15 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
17/10/2019 08:33:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272395.06 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:16 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272395.06 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:17 tester: python /tmp/tester/scapy_ens160f0.cmd1571272395.06
17/10/2019 08:33:18 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:33:20 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=80 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:33:20 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP]
17/10/2019 08:33:20 dut.10.240.176.196: start
17/10/2019 08:33:20 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:33:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272400.65 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272400.65 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571272400.65
17/10/2019 08:33:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
17/10/2019 08:33:26 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=130 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:33:26 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP]
17/10/2019 08:33:26 dut.10.240.176.196: start
17/10/2019 08:33:26 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:33:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272406.22 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:27 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272406.22 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:28 tester: python /tmp/tester/scapy_ens160f0.cmd1571272406.22
17/10/2019 08:33:29 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=9159)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
17/10/2019 08:33:31 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:33:31 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = SCTP]
17/10/2019 08:33:31 dut.10.240.176.196: start
17/10/2019 08:33:31 dut.10.240.176.196: start
Packet forwarding already started
17/10/2019 08:33:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571272411.8 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:33 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571272411.8 root@10.240.176.173:/tmp/tester/
17/10/2019 08:33:34 tester: python /tmp/tester/scapy_ens160f0.cmd1571272411.8
17/10/2019 08:33:35 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=94, fl=0, tc=0)/UDP(dport=4789, sport=63, len=94, chksum=38949)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
17/10/2019 08:33:37 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=148 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
17/10/2019 08:33:37 dut.10.240.176.196: stop
17/10/2019 08:33:37 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 4 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
17/10/2019 08:33:37 dut.10.240.176.196: quit
17/10/2019 08:33:40 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
17/10/2019 08:33:40 dut.10.240.176.196: cat config/common_base
17/10/2019 08:33:41 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
17/10/2019 08:33:41 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
17/10/2019 08:33:41 dut.10.240.176.196:
17/10/2019 08:33:41 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
17/10/2019 08:33:41 dut.10.240.176.196:
17/10/2019 08:33:41 dut.10.240.176.196: export RTE_SDK=`pwd`
17/10/2019 08:33:41 dut.10.240.176.196:
17/10/2019 08:33:41 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
17/10/2019 08:33:41 dut.10.240.176.196:
17/10/2019 08:33:41 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
17/10/2019 08:33:41 dut.10.240.176.196:
17/10/2019 08:33:41 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
17/10/2019 08:33:41 dut.10.240.176.196:
17/10/2019 08:33:41 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
17/10/2019 08:33:42 dut.10.240.176.196:
17/10/2019 08:33:42 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
17/10/2019 08:35:44 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio_mp_sync.o
CC eal_vfio.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_alarm.o
CC eal_interrupts.o
CC eal_common_lcore.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_cfgfile
== Build lib/librte_timer
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_timer.h
CC rte_ring.o
CC rte_timer.o
SYMLINK-FILE include/rte_meter.h
CC rte_meter.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_pci.o
CC rte_metrics.o
SYMLINK-FILE include/rte_stack_lf_c11.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_cfgfile.h
CC rte_jobstats.o
CC rte_stack.o
CC rte_stack_std.o
CC rte_stack_lf.o
CC rte_cfgfile.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
AR librte_stack.a
INSTALL-LIB librte_ring.a
INSTALL-LIB librte_stack.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
AR librte_hash.a
AR librte_net.a
INSTALL-LIB librte_hash.a
INSTALL-LIB librte_net.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
SYMLINK-FILE include/rte_efd.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
CC rte_efd.o
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_member.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/rte_approx.h
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/cmdline_parse_portlist.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_member.o
CC rte_member_ht.o
CC cmdline.o
CC rte_member_vbf.o
CC cmdline_cirbuf.o
CC rte_sched.o
CC rte_lpm.o
CC rte_red.o
CC rte_approx.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse.o
CC rte_lpm6.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
CC cmdline_parse_portlist.o
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
CC ethdev_private.o
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC rte_tm.o
CC rte_mtr.o
CC ethdev_profile.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_eventdev
== Build lib/librte_security
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_bitratestats
== Build lib/librte_gro
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_security.o
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_ip_frag.h
CC rte_kni.o
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_distributor.h
CC rte_ipv4_fragmentation.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC rte_distributor_v20.o
CC rte_ipv6_fragmentation.o
CC rte_distributor.o
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_pdump.h
CC rte_latencystats.o
SYMLINK-FILE include/rte_vhost_crypto.h
CC rte_ipv4_reassembly.o
SYMLINK-FILE include/rte_bitrate.h
CC rte_distributor_match_sse.o
CC rte_ipv6_reassembly.o
CC rte_ip_frag_common.o
CC rte_pdump.o
SYMLINK-FILE include/rte_gso.h
CC rte_eventdev.o
CC rte_bitrate.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/bpf_def.h
CC rte_event_ring.o
CC ip_frag_internal.o
SYMLINK-FILE include/rte_bpf.h
CC rte_gso.o
CC gso_common.o
CC rte_gro.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC gro_tcp4.o
CC gso_tcp4.o
SYMLINK-FILE include/rte_bpf_ethdev.h
CC fd_man.o
CC bpf.o
CC rte_event_crypto_adapter.o
CC bpf_exec.o
CC gso_tunnel_tcp4.o
CC rte_event_eth_tx_adapter.o
CC gso_udp4.o
CC iotlb.o
CC socket.o
CC gro_vxlan_tcp4.o
CC bpf_load.o
CC bpf_pkt.o
CC vhost.o
CC bpf_validate.o
CC bpf_jit_x86.o
CC vhost_user.o
CC virtio_net.o
CC vdpa.o
CC vhost_crypto.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_bpf.a
AR librte_distributor.a
INSTALL-LIB librte_bpf.a
INSTALL-LIB librte_distributor.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_gso.a
INSTALL-LIB librte_gso.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_flow_classify.h
SYMLINK-FILE include/rte_table_action.h
CC rte_flow_classify.o
CC rte_pipeline.o
CC rte_flow_classify_parse.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC octeontx_mbox.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC cpt_pmd_ops_helper.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
Building modules, stage 2.
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/dpbp.o
CC linux/vmbus_bus.o
CC vmbus_common.o
CC mc/mc_sys.o
CC linux/vmbus_uio.o
CC vmbus_channel.o
CC mc/dpio.o
CC vmbus_bufring.o
CC mc/dpcon.o
CC vmbus_common_uio.o
CC mc/dpci.o
CC mc/dpdmai.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC ifpga_common.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
SYMLINK-FILE include/rte_bus_vdev.h
CC fslmc_bus.o
CC dpaa_bus.o
CC vdev.o
CC vdev_params.o
CC base/fman/fman.o
CC base/fman/of.o
CC base/fman/netcfg_layer.o
CC base/fman/fman_hw.o
SYMLINK-FILE include/rte_bus_pci.h
CC base/qbman/bman_driver.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC linux/pci.o
CC linux/pci_uio.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
CC linux/pci_vfio.o
CC pci_params.o
CC pci_common.o
CC pci_common_uio.o
MODPOST 1 modules
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
AR librte_bus_ifpga.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
INSTALL-LIB librte_bus_ifpga.a
Building modules, stage 2.
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpci.o
LD portal/dpaa2_hw_dpio.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_bucket.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa_mempool.o
CC dpaa2_hw_mempool.o
CC rte_mempool_stack.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC rte_mempool_ring.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_octeontx2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/crypto/scheduler
== Build drivers/crypto/octeontx
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/null
== Build drivers/crypto/dpaa_sec
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/crypto/caam_jr
== Build drivers/crypto/virtio
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/crypto/nitrox
== Build drivers/net/atlantic
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/enetc
== Build drivers/net/ena
== Build drivers/net/enic
== Build drivers/net/e1000
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
CC qat_comp.o
CC qat_comp_pmd.o
== Build drivers/baseband/null
CC qat_device.o
== Build drivers/baseband/fpga_lte_fec
== Build drivers/baseband/turbo_sw
== Build drivers/net/iavf
CC qat_common.o
== Build drivers/compress/octeontx
== Build drivers/net/ixgbe
== Build drivers/net/ice
== Build drivers/net/ipn3ke
CC nitrox_device.o
CC otx_cryptodev.o
CC rte_eth_af_packet.o
SYMLINK-FILE include/rte_avp_common.h
CC dpaa_sec.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC axgbe_ethdev.o
CC null_crypto_pmd.o
SYMLINK-FILE include/rte_eth_bond.h
CC atl_rxtx.o
CC virtqueue.o
SYMLINK-FILE include/fpga_lte_fec.h
CC ark_ddm.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC caam_jr.o
CC enetc_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC hns3_ethdev.o
SYMLINK-FILE include/rte_avp_fifo.h
CC ena_ethdev.o
CC base/dpaa2_hw_dpni.o
CC dpaa2_sec_dpseci.o
CC ipn3ke_ethdev.o
CC failsafe.o
CC fpga_lte_fec.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC dpaa_ethdev.o
CC hinic_pmd_api_cmd.o
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC avp_ethdev.o
CC cxgbe_ethdev.o
CC bbdev_null.o
CC rte_eth_bond_api.o
CC iavf_adminq.o
CC bbdev_turbo_software.o
CC enic_ethdev.o
CC scheduler_pmd.o
CC fm10k_ethdev.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_ice.h
SYMLINK-FILE include/rte_pmd_i40e.h
CC ice_controlq.o
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC ark_ethdev_rx.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC ark_ethdev_tx.o
CC ark_mpu.o
CC e1000_82540.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD nitrox_device.o
LD otx_cryptodev.o
CC nitrox_hal.o
CC otx_cryptodev_capabilities.o
CC otx_cryptodev_hw_access.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD ipn3ke_ethdev.o
CC qat_logs.o
CC ipn3ke_representor.o
CC scheduler_pmd_ops.o
CC dpaa2_rxtx.o
CC e1000_82541.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC qat_qp.o
CC nitrox_logs.o
LD failsafe.o
CC hinic_pmd_cfg.o
CC failsafe_args.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
LD axgbe_ethdev.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
CC nitrox_sym.o
LD bbdev_null.o
CC axgbe_dev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
CC axgbe_mdio.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC virtio_pci.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
PMDINFO otx_zip_pmd.o.pmd.c
CC rte_eth_bond_pmd.o
CC otx_zip_pmd.o.pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD enic_ethdev.o
LD otx_zip_pmd.o
LD ark_ethdev.o
CC enic_main.o
CC enic_rxtx.o
CC otx_zip.o
CC e1000_82542.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
LD dpaa_ethdev.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
LD bbdev_turbo_software.o
CC dpaa_rxtx.o
CC atl_ethdev.o
LD enetc_ethdev.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC i40e_common.o
CC enetc_rxtx.o
CC otx_cryptodev_mbox.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC e1000_82543.o
LD fpga_lte_fec.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC ipn3ke_tm.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
CC ipn3ke_flow.o
CC rte_cryptodev_scheduler.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC scheduler_roundrobin.o
CC hinic_pmd_cmdq.o
CC failsafe_eal.o
CC failsafe_ops.o
CC ixgbe_82598.o
CC virtio_rxtx.o
CC ark_pktchkr.o
CC e1000_82571.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
AR librte_pmd_qat.a
CC e1000_82575.o
INSTALL-LIB librte_pmd_qat.a
CC e1000_i210.o
CC nitrox_sym_capabilities.o
CC nitrox_sym_reqmgr.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
AR librte_pmd_null_crypto.a
LD cxgbe_ethdev.o
INSTALL-LIB librte_pmd_null_crypto.a
CC scheduler_pkt_size_distr.o
CC cxgbevf_ethdev.o
CC otx_cryptodev_ops.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC cxgbe_main.o
CC iavf_common.o
CC axgbe_phy_impl.o
CC axgbe_i2c.o
CC atl_hw_regs.o
CC ixgbe_82599.o
CC ixgbe_x540.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC hinic_pmd_eqs.o
CC fm10k_rxtx.o
CC e1000_api.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
CC ice_common.o
CC hinic_pmd_hwdev.o
CC hns3_ethdev_vf.o
CC hw_atl_utils.o
CC ark_pktdir.o
CC failsafe_rxtx.o
CC hns3_cmd.o
CC hns3_mbx.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC scheduler_failover.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC scheduler_multicore.o
CC ark_pktgen.o
CC ark_rqp.o
CC nitrox_qp.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
CC e1000_ich8lan.o
LD cxgbevf_ethdev.o
CC e1000_logs.o
CC fm10k_pf.o
PMDINFO ena_ethdev.o.pmd.c
CC ark_udm.o
CC ena_ethdev.o.pmd.o
CC e1000_mac.o
LD ena_ethdev.o
CC ena_com.o
CC e1000_manage.o
CC ixgbe_x550.o
CC ixgbe_phy.o
CC cxgbevf_main.o
CC ixgbe_api.o
CC iavf_ethdev.o
CC ixgbe_vf.o
CC virtio_cryptodev.o
CC ena_eth_com.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC hinic_pmd_hwif.o
CC dpaa2_ethdev.o
CC dpaa2_flow.o
CC enic_clsf.o
CC e1000_mbx.o
CC hw_atl_llh.o
CC hw_atl_utils_fw2x.o
CC axgbe_rxtx.o
CC axgbe_rxtx_vec_sse.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
CC hinic_pmd_nicio.o
CC hinic_pmd_wq.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_rxtx.o
CC hns3_ethdev_vf.o.pmd.o
CC hns3_rss.o
LD hns3_ethdev_vf.o
CC hns3_flow.o
CC ixgbe_hv_vf.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC hns3_fdir.o
CC hns3_intr.o
CC dpaa2_mux.o
CC sge.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
== Build drivers/net/liquidio
CC cxgbe_filter.o
CC hw_atl_b0.o
CC rte_pmd_atlantic.o
CC ixgbe_dcb.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC failsafe_ether.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC failsafe_flow.o
CC i40e_diag.o
CC i40e_hmc.o
CC lio_ethdev.o
CC lio_rxtx.o
CC enic_res.o
CC enic_flow.o
CC base/vnic_cq.o
CC e1000_nvm.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC e1000_osdep.o
CC e1000_phy.o
CC e1000_vf.o
CC igb_ethdev.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
PMDINFO dpaa2_mux.o.pmd.c
LD rte_eth_bond_pmd.o
CC dpaa2_mux.o.pmd.o
LD caam_jr.o
LD dpaa2_mux.o
CC rte_eth_bond_args.o
CC caam_jr_capabilities.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC caam_jr_hw.o
CC caam_jr_uio.o
LD virtio_cryptodev.o
CC dpaa2_sparser.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC igb_rxtx.o
CC rte_eth_bond_8023ad.o
CC hinic_pmd_ethdev.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC hinic_pmd_rx.o
CC fm10k_tlv.o
CC i40e_lan_hmc.o
CC i40e_nvm.o
CC ixgbe_dcb_82599.o
CC i40e_dcb.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC i40e_ethdev.o
CC mc/dpni.o
LD dpaa2_ethdev.o
CC failsafe_intr.o
CC mc/dpkg.o
CC mc/dpdmux.o
CC fm10k_common.o
CC i40e_rxtx.o
CC hns3_stats.o
CC i40e_rxtx_vec_sse.o
CC i40e_ethdev_vf.o
CC ixgbe_dcb_82598.o
CC i40e_pf.o
CC i40e_fdir.o
CC i40e_flow.o
CC fm10k_mbx.o
CC rte_pmd_i40e.o
CC i40e_tm.o
CC ice_sched.o
CC ice_switch.o
CC base/vnic_wq.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC hinic_pmd_tx.o
AR librte_pmd_caam_jr.a
CC fm10k_vf.o
INSTALL-LIB librte_pmd_caam_jr.a
CC i40e_vf_representor.o
CC ixgbe_mbx.o
CC ixgbe_rxtx.o
CC ixgbe_ethdev.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC ixgbe_fdir.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC ixgbe_pf.o
CC ixgbe_flow.o
CC ixgbe_rxtx_vec_sse.o
CC ixgbe_ipsec.o
CC lio_23xx_vf.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
CC iavf_vchnl.o
CC iavf_rxtx.o
CC fm10k_api.o
CC base/vnic_dev.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC hns3_regs.o
LD dpaa_sec.o
AR librte_pmd_dpaa_sec.a
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_dpaa_sec.a
CC i40e_rxtx_vec_avx2.o
CC igb_pf.o
LD hinic_pmd_ethdev.o
CC fm10k_rxtx_vec.o
CC igb_flow.o
CC em_ethdev.o
CC hns3_dcb.o
CC hns3_mp.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
CC mc/dpseci.o
CC em_rxtx.o
CC lio_mbox.o
CC iavf_rxtx_vec_sse.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
== Build drivers/net/memif
CC rte_pmd_ixgbe.o
CC ixgbe_tm.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC base/vnic_intr.o
CC base/vnic_rq.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
CC enic_rxtx_vec_avx2.o
LD igb_ethdev.o
== Build drivers/net/netvsc
CC cxgbe_flow.o
CC ice_nvm.o
== Build drivers/net/nfp
== Build drivers/net/bnxt
CC rte_eth_memif.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
== Build drivers/net/null
CC rte_eth_bond_alb.o
== Build drivers/net/octeontx
CC hn_ethdev.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC nfp_cppcore.o
CC rte_eth_bond_flow.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC rte_eth_null.o
== Build drivers/net/octeontx2
CC octeontx_rxtx.o
CC octeontx_pkovf.o
CC octeontx_pkivf.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC octeontx_bgx.o
CC octeontx_ethdev.o
== Build drivers/net/qede
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
== Build drivers/net/ring
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
LD octeontx_pkovf.o
LD octeontx_pkivf.o
CC ixgbe_vf_representor.o
== Build drivers/net/sfc
== Build drivers/net/tap
CC otx2_rx.o
CC otx2_tx.o
== Build drivers/net/thunderx
== Build drivers/net/vdev_netvsc
== Build drivers/net/virtio
== Build drivers/net/vmxnet3
SYMLINK-FILE include/rte_eth_ring.h
CC nfp_cpp_pcie_ops.o
CC rte_eth_ring.o
CC ecore_dev.o
CC sfc_ethdev.o
CC bnxt_ethdev.o
AR librte_pmd_bond.a
CC nfp_mutex.o
INSTALL-LIB librte_pmd_bond.a
CC ecore_hw.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC ecore_cxt.o
CC nicvf_rxtx.o
CC vdev_netvsc.o
CC otx2_tm.o
CC virtqueue.o
CC otx2_rss.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
CC rte_eth_tap.o
LD hn_ethdev.o
CC vmxnet3_rxtx.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC hn_rxtx.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC virtio_pci.o
AR librte_pmd_e1000.a
CC virtio_rxtx.o
INSTALL-LIB librte_pmd_e1000.a
CC nicvf_hw.o
== Build drivers/net/kni
== Build drivers/net/softnic
CC nfp_resource.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC virtio_ethdev.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC t4_hw.o
CC memif_socket.o
CC rte_eth_kni.o
AR librte_pmd_hinic.a
SYMLINK-FILE include/rte_eth_softnic.h
INSTALL-LIB librte_pmd_hinic.a
CC tap_flow.o
CC rte_eth_softnic.o
CC tap_netlink.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC tap_tcmsgs.o
CC tap_bpf_api.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC ecore_l2.o
CC otx2_mac.o
CC tap_intr.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
CC nicvf_mbox.o
LD ixgbe_ethdev.o
== Build drivers/net/vhost
CC nfp_crc.o
CC otx2_ptp.o
CC nfp_mip.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
CC nicvf_ethdev.o
LD vdev_netvsc.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
== Build drivers/net/ifc
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC nicvf_bsvf.o
CC nfp_nffw.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC nfp_hwinfo.o
CC virtio_rxtx_simple.o
CC otx2_flow.o
CC ifcvf_vdpa.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC nfp_rtsym.o
LD rte_eth_kni.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
AR librte_pmd_kni.a
LD rte_eth_null.o
INSTALL-LIB librte_pmd_kni.a
CC ice_flex_pipe.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC ice_flow.o
CC ice_dcb.o
LD rte_eth_softnic.o
CC ice_fdir.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
CC rte_eth_softnic_link.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC nicvf_svf.o
CC nfp_nsp.o
CC bnxt_filter.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
LD sfc_ethdev.o
CC virtio_rxtx_simple_sse.o
CC sfc_kvargs.o
CC ecore_sp_commands.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC ecore_init_ops.o
CC sfc.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
CC sfc_mcdi.o
CC sfc_intr.o
CC nfp_nsp_cmds.o
CC nfp_nsp_eth.o
CC rte_eth_softnic_tm.o
CC rte_eth_softnic_tap.o
CC bnxt_flow.o
CC bnxt_hwrm.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
AR librte_pmd_thunderx_nicvf.a
CC bnxt_ring.o
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC bnxt_rxq.o
CC bnxt_rxr.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC ecore_mcp.o
LD bnxt_ethdev.o
CC ecore_int.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ecore_dcbx.o
CC ifcvf_vdpa.o.pmd.o
CC bcm_osal.o
LD ifcvf_vdpa.o
CC ecore_sriov.o
CC ifcvf.o
CC ecore_vf.o
CC qede_ethdev.o
CC hn_rndis.o
CC hn_nvs.o
CC hn_vf.o
CC qede_main.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC sfc_ev.o
CC ice_ethdev.o
CC nfp_net.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
LD rte_eth_vhost.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC ice_rxtx.o
LD i40e_ethdev.o
CC rte_eth_softnic_action.o
CC sfc_port.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC rte_eth_softnic_pipeline.o
CC rte_eth_softnic_thread.o
CC rte_eth_softnic_cli.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC rte_eth_softnic_flow.o
CC vmxnet3_ethdev.o
CC sfc_rx.o
CC clip_tbl.o
CC ice_rxtx_vec_sse.o
CC qede_rxtx.o
CC qede_filter.o
CC bnxt_stats.o
CC ice_switch_filter.o
CC mps_tcam.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC l2t.o
CC t4vf_hw.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC sfc_tx.o
CC conn.o
CC sfc_tso.o
CC sfc_filter.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
AR librte_pmd_tap.a
CC bnxt_txq.o
INSTALL-LIB librte_pmd_tap.a
CC bnxt_txr.o
CC sfc_flow.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
LD vmxnet3_ethdev.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC otx2_link.o
CC otx2_vlan.o
CC sfc_dp.o
CC sfc_ef10_rx.o
CC bnxt_vnic.o
CC bnxt_irq.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
CC bnxt_rxtx_vec_sse.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
CC virtio_user/vhost_user.o
CC virtio_user/vhost_kernel.o
CC efx_crc32.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC efx_ev.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC efx_evb.o
CC efx_filter.o
CC otx2_stats.o
CC efx_hash.o
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC efx_intr.o
CC otx2_flow_parse.o
CC otx2_flow_utils.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC efx_phy.o
CC efx_port.o
LD virtio_user_ethdev.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_softnic.a
CC siena_sram.o
INSTALL-LIB librte_pmd_softnic.a
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC ef10_intr.o
LD ice_ethdev.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx2
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/opdl
== Build drivers/event/dpaa2
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC dsw_evdev.o
CC dsw_event.o
CC dpaa_eventdev.o
CC dsw_xstats.o
CC skeleton_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC opdl_test.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD dsw_evdev.o
LD opdl_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD timvf_probe.o
LD ssovf_probe.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ioat
== Build drivers/raw/ifpga
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
CC ntb.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC dpaa2_qdma.o
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
LD ifpga_rawdev.o
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/pdump
== Build app/test-pipeline
== Build app/test-cmdline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC cmdline_test.o
CC commands.o
CC main.o
CC main.o
CC cperf_ops.o
CC cperf_options_parsing.o
CC test_bbdev.o
CC test_bbdev_perf.o
CC cperf_test_vectors.o
CC test_bbdev_vector.o
CC cperf_test_throughput.o
CC evt_main.o
CC cperf_test_latency.o
CC evt_options.o
CC evt_test.o
CC cperf_test_pmd_cyclecount.o
CC parser.o
CC test_order_common.o
CC main.o
CC cperf_test_verify.o
CC test_order_queue.o
CC test_order_atq.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
CC test_perf_common.o
CC test_perf_queue.o
CC test_perf_atq.o
CC test_pipeline_common.o
CC main.o
CC comp_perf_options_parse.o
CC main.o
CC config.o
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC testpmd.o
CC comp_perf_test_verify.o
LD cmdline_test
CC comp_perf_test_benchmark.o
CC commands.o
CC comp_perf_test_common.o
CC test.o
LD testacl
CC init.o
CC runtime.o
CC resource.o
CC parameters.o
LD dpdk-procinfo
CC cmdline.o
LD dpdk-pdump
CC cmdline_flow.o
CC cmdline_mtr.o
CC test_resource.o
CC cmdline_tm.o
CC pipeline_stub.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC pipeline_acl.o
INSTALL-APP cmdline_test
CC test_prefetch.o
INSTALL-MAP cmdline_test.map
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
CC test_barrier.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC config.o
CC iofwd.o
CC macfwd.o
CC macswap.o
CC flowgen.o
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
CC test_memzone.o
LD dpdk-test-eventdev
CC test_bitmap.o
CC rxonly.o
INSTALL-APP testacl
CC txonly.o
CC csumonly.o
CC icmpecho.o
INSTALL-MAP testacl.map
CC noisy_vnf.o
CC bpf_cmd.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
INSTALL-APP dpdk-pdump
CC util.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC softnicfwd.o
CC test_fbarray.o
INSTALL-MAP dpdk-pdump.map
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
LD testpipeline
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
INSTALL-APP dpdk-test-eventdev
CC test_timer_racecond.o
CC test_timer_secondary.o
INSTALL-MAP dpdk-test-eventdev.map
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
LD dpdk-test-crypto-perf
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
INSTALL-APP dpdk-test-crypto-perf
CC test_power.o
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
17/10/2019 08:35:44 TestVxlan: Test Case test_vxlan_ipv6_detect Result PASSED:
17/10/2019 08:35:44 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:35:48 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
17/10/2019 08:35:52 dts:
TEST SUITE ENDED: TestVxlan
18/10/2019 06:02:49 dts:
TEST SUITE : TestVxlan
18/10/2019 06:02:49 dts: NIC : fortville_eagle
18/10/2019 06:02:49 dut.10.240.176.196:
18/10/2019 06:02:49 tester:
18/10/2019 06:02:49 TestVxlan: Test Case test_tunnel_filter Begin
18/10/2019 06:02:49 dut.10.240.176.196:
18/10/2019 06:02:49 tester:
18/10/2019 06:02:49 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
18/10/2019 06:03:02 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:03:02 dut.10.240.176.196: set fwd rxonly
18/10/2019 06:03:02 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
18/10/2019 06:03:02 dut.10.240.176.196: set verbose 1
18/10/2019 06:03:02 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
18/10/2019 06:03:02 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:03:02 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:03:07 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:03:07 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:03:12 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
18/10/2019 06:03:12 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan 1 3
18/10/2019 06:03:12 dut.10.240.176.196: start
18/10/2019 06:03:12 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:03:12 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349792.75 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349792.75 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:15 tester: python /tmp/tester/scapy_ens160f0.cmd1571349792.75
18/10/2019 06:03:16 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:03:18 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:03:18 dut.10.240.176.196: stop
18/10/2019 06:03:18 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:03:18 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
18/10/2019 06:03:18 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-ivlan-tenid 1 3
18/10/2019 06:03:18 dut.10.240.176.196: start
18/10/2019 06:03:18 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:03:18 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349798.59 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:19 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349798.59 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:21 tester: python /tmp/tester/scapy_ens160f0.cmd1571349798.59
18/10/2019 06:03:22 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:03:24 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:03:24 dut.10.240.176.196: stop
18/10/2019 06:03:24 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:03:24 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
18/10/2019 06:03:24 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac-tenid 1 3
18/10/2019 06:03:24 dut.10.240.176.196: start
18/10/2019 06:03:24 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:03:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349804.4 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:25 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349804.4 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:27 tester: python /tmp/tester/scapy_ens160f0.cmd1571349804.4
18/10/2019 06:03:27 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:03:29 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:03:29 dut.10.240.176.196: stop
18/10/2019 06:03:29 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:03:29 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
18/10/2019 06:03:30 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan imac 1 3
18/10/2019 06:03:30 dut.10.240.176.196: start
18/10/2019 06:03:30 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:03:30 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349810.23 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349810.23 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:32 tester: python /tmp/tester/scapy_ens160f0.cmd1571349810.23
18/10/2019 06:03:33 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:03:35 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:03:35 dut.10.240.176.196: stop
18/10/2019 06:03:35 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:03:35 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
18/10/2019 06:03:35 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
18/10/2019 06:03:35 dut.10.240.176.196: start
18/10/2019 06:03:36 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:03:36 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349816.05 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:37 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349816.05 root@10.240.176.173:/tmp/tester/
18/10/2019 06:03:38 tester: python /tmp/tester/scapy_ens160f0.cmd1571349816.05
18/10/2019 06:03:39 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:03:41 dut.10.240.176.196: port 0/queue 3: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x3
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:03:41 dut.10.240.176.196: stop
18/10/2019 06:03:41 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
RX-packets: 1 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:03:41 dut.10.240.176.196: quit
18/10/2019 06:03:45 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Bye...
18/10/2019 06:03:45 TestVxlan: Test Case test_tunnel_filter Result PASSED:
18/10/2019 06:03:45 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:03:48 TestVxlan: Test Case test_tunnel_filter_invalid Begin
18/10/2019 06:03:48 dut.10.240.176.196:
18/10/2019 06:03:48 tester:
18/10/2019 06:03:48 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
18/10/2019 06:04:00 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:00 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:04:00 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:04:05 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:04:06 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 3
Bad arguments
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.1.256 1 vxlan omac-imac-tenid 1 3
Bad arguments
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 4097 vxlan omac-imac-tenid 1 3
i40e_tunnel_filter_param_check(): Invalid inner VLAN ID
cmd_tunnel_filter_parsed error: (Input/output error)
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
18/10/2019 06:04:11 dut.10.240.176.196: tunnel_filter add 0 68:05:ca:bb:bb:a1 00:00:20:00:00:01 192.168.2.2 1 vxlan omac-imac-tenid 1 64
i40e_tunnel_filter_param_check(): Invalid queue ID
cmd_tunnel_filter_parsed error: (Input/output error)
18/10/2019 06:04:11 dut.10.240.176.196: stop
18/10/2019 06:04:11 dut.10.240.176.196: stop
Packet forwarding not started
18/10/2019 06:04:11 dut.10.240.176.196: quit
18/10/2019 06:04:15 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
18/10/2019 06:04:15 TestVxlan: Test Case test_tunnel_filter_invalid Result PASSED:
18/10/2019 06:04:15 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:04:18 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Begin
18/10/2019 06:04:18 dut.10.240.176.196:
18/10/2019 06:04:18 tester:
18/10/2019 06:04:18 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
18/10/2019 06:04:30 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:30 dut.10.240.176.196: vlan set filter off 0
18/10/2019 06:04:30 dut.10.240.176.196: vlan set filter off 0
18/10/2019 06:04:30 dut.10.240.176.196: set fwd csum
18/10/2019 06:04:31 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
18/10/2019 06:04:31 dut.10.240.176.196: port stop all
18/10/2019 06:04:31 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:04:31 dut.10.240.176.196: port stop all
18/10/2019 06:04:31 dut.10.240.176.196: port stop all
Stopping ports...
Done
18/10/2019 06:04:31 dut.10.240.176.196: csum set ip hw 1
18/10/2019 06:04:31 dut.10.240.176.196: csum set ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:04:31 dut.10.240.176.196: port start all
18/10/2019 06:04:31 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:31 dut.10.240.176.196: port stop all
18/10/2019 06:04:32 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:04:32 dut.10.240.176.196: csum set outer-ip hw 1
18/10/2019 06:04:32 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:04:32 dut.10.240.176.196: port start all
18/10/2019 06:04:32 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:32 dut.10.240.176.196: port stop all
18/10/2019 06:04:32 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:04:32 dut.10.240.176.196: csum set udp hw 1
18/10/2019 06:04:32 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:04:32 dut.10.240.176.196: port start all
18/10/2019 06:04:33 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:33 dut.10.240.176.196: port stop all
18/10/2019 06:04:33 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:04:33 dut.10.240.176.196: csum set tcp hw 1
18/10/2019 06:04:33 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:04:33 dut.10.240.176.196: port start all
18/10/2019 06:04:33 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:33 dut.10.240.176.196: port stop all
18/10/2019 06:04:33 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:04:33 dut.10.240.176.196: csum set sctp hw 1
18/10/2019 06:04:34 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:04:34 dut.10.240.176.196: port start all
18/10/2019 06:04:34 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:04:34 dut.10.240.176.196: port start all
18/10/2019 06:04:34 dut.10.240.176.196: port start all
Port 0 is now not stopped
Port 1 is now not stopped
Please stop the ports first
Done
18/10/2019 06:04:34 dut.10.240.176.196: csum parse-tunnel on 1
18/10/2019 06:04:34 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is hw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:04:34 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:04:34 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:04:39 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:04:39 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:04:45 TestVxlan: chksums_ref{}
18/10/2019 06:04:45 TestVxlan: vxlan packet [outer_udp_dst = 1234][outer_ip_invalid = 1]
18/10/2019 06:04:45 dut.10.240.176.196: start
18/10/2019 06:04:45 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:04:45 tester: ls -d /tmp/tester/
18/10/2019 06:04:46 tester: /tmp/tester/
18/10/2019 06:04:46 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:04:46 tester:
18/10/2019 06:04:51 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349891.33 root@10.240.176.173:/tmp/tester/
18/10/2019 06:04:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349891.33 root@10.240.176.173:/tmp/tester/
18/10/2019 06:04:54 tester: python /tmp/tester/scapy_ens160f0.cmd1571349891.33
18/10/2019 06:04:54 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:05:01 TestVxlan: chksums{}
18/10/2019 06:05:01 dut.10.240.176.196: stop
18/10/2019 06:05:01 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:05:02 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:02 TestVxlan: vxlan packet [inner_ip_invalid = 1]
18/10/2019 06:05:02 dut.10.240.176.196: start
18/10/2019 06:05:02 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:05:02 tester: ls -d /tmp/tester/
18/10/2019 06:05:02 tester: /tmp/tester/
18/10/2019 06:05:02 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:05:03 tester:
18/10/2019 06:05:08 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349908.16 root@10.240.176.173:/tmp/tester/
18/10/2019 06:05:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349908.16 root@10.240.176.173:/tmp/tester/
18/10/2019 06:05:10 tester: python /tmp/tester/scapy_ens160f0.cmd1571349908.16
18/10/2019 06:05:11 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:05:18 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:18 dut.10.240.176.196: stop
18/10/2019 06:05:18 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:05:19 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:19 TestVxlan: vxlan packet [outer_ip_invalid = 1]
18/10/2019 06:05:19 dut.10.240.176.196: start
18/10/2019 06:05:19 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:05:19 tester: ls -d /tmp/tester/
18/10/2019 06:05:19 tester: /tmp/tester/
18/10/2019 06:05:19 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:05:19 tester:
18/10/2019 06:05:25 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349925.01 root@10.240.176.173:/tmp/tester/
18/10/2019 06:05:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349925.01 root@10.240.176.173:/tmp/tester/
18/10/2019 06:05:27 tester: python /tmp/tester/scapy_ens160f0.cmd1571349925.01
18/10/2019 06:05:28 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:05:35 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:35 dut.10.240.176.196: stop
18/10/2019 06:05:35 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:05:36 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:36 TestVxlan: vxlan packet [inner_ip_invalid = 1][outer_ip_invalid = 1]
18/10/2019 06:05:36 dut.10.240.176.196: start
18/10/2019 06:05:36 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:05:36 tester: ls -d /tmp/tester/
18/10/2019 06:05:36 tester: /tmp/tester/
18/10/2019 06:05:36 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:05:36 tester:
18/10/2019 06:05:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349941.88 root@10.240.176.173:/tmp/tester/
18/10/2019 06:05:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349941.88 root@10.240.176.173:/tmp/tester/
18/10/2019 06:05:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571349941.88
18/10/2019 06:05:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:05:52 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:52 dut.10.240.176.196: stop
18/10/2019 06:05:52 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:05:53 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:05:53 TestVxlan: vxlan packet [inner_l4_invalid = 1]
18/10/2019 06:05:53 dut.10.240.176.196: start
18/10/2019 06:05:53 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:05:53 tester: ls -d /tmp/tester/
18/10/2019 06:05:53 tester: /tmp/tester/
18/10/2019 06:05:53 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:05:53 tester:
18/10/2019 06:05:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349958.75 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:00 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349958.75 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571349958.75
18/10/2019 06:06:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:06:08 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:06:08 dut.10.240.176.196: stop
18/10/2019 06:06:09 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:06:10 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:06:10 TestVxlan: vxlan packet [inner_l4_type = TCP][inner_l4_invalid = 1]
18/10/2019 06:06:10 dut.10.240.176.196: start
18/10/2019 06:06:10 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:06:10 tester: ls -d /tmp/tester/
18/10/2019 06:06:10 tester: /tmp/tester/
18/10/2019 06:06:10 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:06:10 tester:
18/10/2019 06:06:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349975.59 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:17 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349975.59 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:18 tester: python /tmp/tester/scapy_ens160f0.cmd1571349975.59
18/10/2019 06:06:19 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:06:25 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:06:25 dut.10.240.176.196: stop
18/10/2019 06:06:25 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:06:26 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
18/10/2019 06:06:26 TestVxlan: vxlan packet [inner_l4_type = SCTP][inner_l4_invalid = 1]
18/10/2019 06:06:26 dut.10.240.176.196: start
18/10/2019 06:06:27 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:06:27 tester: ls -d /tmp/tester/
18/10/2019 06:06:27 tester: /tmp/tester/
18/10/2019 06:06:27 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:06:27 tester:
18/10/2019 06:06:32 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571349992.44 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:33 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571349992.44 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:35 tester: python /tmp/tester/scapy_ens160f0.cmd1571349992.44
18/10/2019 06:06:36 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
18/10/2019 06:06:42 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
18/10/2019 06:06:42 dut.10.240.176.196: stop
18/10/2019 06:06:42 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:06:43 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:06:43 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip_invalid = 1]
18/10/2019 06:06:43 dut.10.240.176.196: start
18/10/2019 06:06:43 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:06:43 tester: ls -d /tmp/tester/
18/10/2019 06:06:44 tester: /tmp/tester/
18/10/2019 06:06:44 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:06:44 tester:
18/10/2019 06:06:49 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350009.31 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:50 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350009.31 root@10.240.176.173:/tmp/tester/
18/10/2019 06:06:52 tester: python /tmp/tester/scapy_ens160f0.cmd1571350009.31
18/10/2019 06:06:52 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:06:59 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:06:59 dut.10.240.176.196: stop
18/10/2019 06:06:59 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:07:00 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:00 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1]
18/10/2019 06:07:00 dut.10.240.176.196: start
18/10/2019 06:07:00 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:07:00 tester: ls -d /tmp/tester/
18/10/2019 06:07:00 tester: /tmp/tester/
18/10/2019 06:07:00 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:07:01 tester:
18/10/2019 06:07:06 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350026.16 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:07 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350026.16 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:08 tester: python /tmp/tester/scapy_ens160f0.cmd1571350026.16
18/10/2019 06:07:09 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:07:16 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:16 dut.10.240.176.196: stop
18/10/2019 06:07:16 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:07:17 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:17 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][outer_ip_invalid = 1]
18/10/2019 06:07:17 dut.10.240.176.196: start
18/10/2019 06:07:17 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:07:17 tester: ls -d /tmp/tester/
18/10/2019 06:07:17 tester: /tmp/tester/
18/10/2019 06:07:17 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:07:17 tester:
18/10/2019 06:07:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350043.02 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:24 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350043.02 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:25 tester: python /tmp/tester/scapy_ens160f0.cmd1571350043.02
18/10/2019 06:07:26 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=37623)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:07:33 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:33 dut.10.240.176.196: stop
18/10/2019 06:07:33 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:07:34 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:34 TestVxlan: vxlan packet [outer_vlan = 1][inner_vlan = 1][outer_ip_invalid = 1]
18/10/2019 06:07:34 dut.10.240.176.196: start
18/10/2019 06:07:34 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:07:34 tester: ls -d /tmp/tester/
18/10/2019 06:07:34 tester: /tmp/tester/
18/10/2019 06:07:34 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:07:34 tester:
18/10/2019 06:07:39 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350059.9 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350059.9 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:42 tester: python /tmp/tester/scapy_ens160f0.cmd1571350059.9
18/10/2019 06:07:43 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:07:50 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:50 dut.10.240.176.196: stop
18/10/2019 06:07:50 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:07:51 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:07:51 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][inner_vlan = 1]
18/10/2019 06:07:51 dut.10.240.176.196: start
18/10/2019 06:07:51 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:07:51 tester: ls -d /tmp/tester/
18/10/2019 06:07:51 tester: /tmp/tester/
18/10/2019 06:07:51 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:07:51 tester:
18/10/2019 06:07:56 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350076.76 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350076.76 root@10.240.176.173:/tmp/tester/
18/10/2019 06:07:59 tester: python /tmp/tester/scapy_ens160f0.cmd1571350076.76
18/10/2019 06:08:00 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=4590)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:08:06 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:08:06 dut.10.240.176.196: stop
18/10/2019 06:08:07 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:08:08 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:08:08 TestVxlan: vxlan packet [outer_vlan = 1][inner_ip_invalid = 1][inner_vlan = 1][outer_ip_invalid = 1]
18/10/2019 06:08:08 dut.10.240.176.196: start
18/10/2019 06:08:08 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:08:08 tester: ls -d /tmp/tester/
18/10/2019 06:08:08 tester: /tmp/tester/
18/10/2019 06:08:08 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:08:08 tester:
18/10/2019 06:08:13 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350093.64 root@10.240.176.173:/tmp/tester/
18/10/2019 06:08:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350093.64 root@10.240.176.173:/tmp/tester/
18/10/2019 06:08:16 tester: python /tmp/tester/scapy_ens160f0.cmd1571350093.64
18/10/2019 06:08:17 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=0, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=4590)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:08:23 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:08:23 dut.10.240.176.196: stop
18/10/2019 06:08:23 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:08:24 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:08:24 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = UDP][inner_l4_invalid = 1]
18/10/2019 06:08:24 dut.10.240.176.196: start
18/10/2019 06:08:25 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:08:25 tester: ls -d /tmp/tester/
18/10/2019 06:08:25 tester: /tmp/tester/
18/10/2019 06:08:25 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:08:25 tester:
18/10/2019 06:08:30 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350110.5 root@10.240.176.173:/tmp/tester/
18/10/2019 06:08:31 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350110.5 root@10.240.176.173:/tmp/tester/
18/10/2019 06:08:33 tester: python /tmp/tester/scapy_ens160f0.cmd1571350110.5
18/10/2019 06:08:34 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=64620)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:08:40 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:08:40 dut.10.240.176.196: stop
18/10/2019 06:08:40 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:08:41 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:08:41 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = TCP][inner_l4_invalid = 1]
18/10/2019 06:08:41 dut.10.240.176.196: start
18/10/2019 06:08:41 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:08:41 tester: ls -d /tmp/tester/
18/10/2019 06:08:42 tester: /tmp/tester/
18/10/2019 06:08:42 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:08:42 tester:
18/10/2019 06:08:47 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350127.35 root@10.240.176.173:/tmp/tester/
18/10/2019 06:08:48 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350127.35 root@10.240.176.173:/tmp/tester/
18/10/2019 06:08:50 tester: python /tmp/tester/scapy_ens160f0.cmd1571350127.35
18/10/2019 06:08:50 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=35954)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:08:57 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:08:57 dut.10.240.176.196: stop
18/10/2019 06:08:57 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:08:58 TestVxlan: chksums_ref{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
18/10/2019 06:08:58 TestVxlan: vxlan packet [outer_vlan = 1][inner_l4_type = SCTP][inner_l4_invalid = 1]
18/10/2019 06:08:58 dut.10.240.176.196: start
18/10/2019 06:08:58 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1009e
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1009e - TX RS bit threshold=32
18/10/2019 06:08:58 tester: ls -d /tmp/tester/
18/10/2019 06:08:59 tester: /tmp/tester/
18/10/2019 06:08:59 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:08:59 tester:
18/10/2019 06:09:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350144.19 root@10.240.176.173:/tmp/tester/
18/10/2019 06:09:05 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350144.19 root@10.240.176.173:/tmp/tester/
18/10/2019 06:09:06 tester: python /tmp/tester/scapy_ens160f0.cmd1571350144.19
18/10/2019 06:09:07 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=21766)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=0)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
18/10/2019 06:09:14 TestVxlan: chksums{'inner_ip': '0xf4e5', 'inner_sctp': '0x73f0cf41'}
18/10/2019 06:09:14 dut.10.240.176.196: stop
18/10/2019 06:09:14 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:09:14 dut.10.240.176.196: quit
18/10/2019 06:09:18 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
18/10/2019 06:09:18 TestVxlan: Test Case test_vxlan_ipv4_checksum_offload Result PASSED:
18/10/2019 06:09:18 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:09:21 TestVxlan: Test Case test_vxlan_ipv4_detect Begin
18/10/2019 06:09:21 dut.10.240.176.196:
18/10/2019 06:09:21 tester:
18/10/2019 06:09:21 dut.10.240.176.196: cat config/common_base
18/10/2019 06:09:21 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
18/10/2019 06:09:31 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
18/10/2019 06:09:31 dut.10.240.176.196:
18/10/2019 06:09:31 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
18/10/2019 06:09:31 dut.10.240.176.196:
18/10/2019 06:09:31 dut.10.240.176.196: export RTE_SDK=`pwd`
18/10/2019 06:09:31 dut.10.240.176.196:
18/10/2019 06:09:31 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
18/10/2019 06:09:32 dut.10.240.176.196:
18/10/2019 06:09:32 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
18/10/2019 06:09:32 dut.10.240.176.196:
18/10/2019 06:09:32 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
18/10/2019 06:09:32 dut.10.240.176.196:
18/10/2019 06:09:32 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
18/10/2019 06:09:32 dut.10.240.176.196:
18/10/2019 06:09:32 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
18/10/2019 06:11:35 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_lcore.o
CC eal_debug.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_common_memzone.o
CC eal_dev.o
CC eal_common_timer.o
CC eal_common_lcore.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_ring
== Build lib/librte_pci
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_jobstats
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_timer.h
CC rte_timer.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_metrics.h
CC rte_rcu_qsbr.o
CC rte_ring.o
CC rte_cfgfile.o
CC rte_stack.o
CC rte_stack_std.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_metrics.o
SYMLINK-FILE include/rte_pci.h
CC rte_stack_lf.o
CC rte_jobstats.o
CC rte_pci.o
SYMLINK-FILE include/rte_meter.h
CC rte_meter.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
AR librte_metrics.a
INSTALL-LIB librte_meter.a
INSTALL-LIB librte_metrics.a
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC guest_channel.o
CC power_kvm_vm.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_reorder.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
CC rte_reorder.o
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_compressdev.o
CC rte_cryptodev.o
CC rte_compressdev_pmd.o
CC rte_cryptodev_pmd.o
CC rte_comp.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
CC rte_sched.o
SYMLINK-FILE include/rte_ethdev_vdev.h
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
CC ethdev_private.o
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC rte_tm.o
CC rte_mtr.o
CC cmdline.o
CC ethdev_profile.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_bitrate.h
CC rte_security.o
SYMLINK-FILE include/rte_pdump.h
CC rte_latencystats.o
CC rte_bitrate.o
SYMLINK-FILE include/rte_kni.h
CC rte_kni.o
SYMLINK-FILE include/rte_distributor.h
CC rte_pdump.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_gso.h
CC rte_distributor_v20.o
SYMLINK-FILE include/rte_bpf_ethdev.h
SYMLINK-FILE include/rte_ip_frag.h
CC rte_distributor.o
CC bpf.o
CC rte_distributor_match_sse.o
CC rte_gso.o
CC rte_ipv4_fragmentation.o
CC gso_common.o
CC rte_ipv6_fragmentation.o
SYMLINK-FILE include/rte_eventdev.h
CC bpf_exec.o
CC rte_ipv4_reassembly.o
CC bpf_load.o
CC bpf_pkt.o
CC gso_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
SYMLINK-FILE include/rte_vhost.h
CC rte_ipv6_reassembly.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC gso_tunnel_tcp4.o
CC rte_ip_frag_common.o
CC gso_udp4.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_vdpa.h
CC rte_gro.o
CC bpf_validate.o
CC ip_frag_internal.o
SYMLINK-FILE include/rte_event_ring.h
CC bpf_jit_x86.o
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC gro_tcp4.o
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC fd_man.o
CC iotlb.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC socket.o
CC rte_eventdev.o
CC vhost.o
CC vhost_user.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC virtio_net.o
CC vdpa.o
CC vhost_crypto.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_gso.a
INSTALL-LIB librte_gso.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build buildtools/pmdinfogen
== Build kernel/linux
HOSTCC pmdinfogen.o
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC octeontx_mbox.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
CC dpaa_bus.o
CC base/fman/fman.o
CC base/fman/netcfg_layer.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC base/fman/fman_hw.o
SYMLINK-FILE include/rte_bus_pci.h
CC base/fman/of.o
CC ifpga_bus.o
CC ifpga_common.o
CC base/qbman/process.o
CC linux/pci.o
CC base/qbman/bman_driver.o
SYMLINK-FILE include/rte_bus_vmbus.h
CC qbman/qbman_portal.o
CC base/qbman/qman.o
CC linux/pci_uio.o
SYMLINK-FILE include/rte_vmbus_reg.h
CC linux/pci_vfio.o
CC pci_params.o
CC mc/dpmng.o
CC base/qbman/bman.o
CC mc/dpbp.o
CC qbman/qbman_debug.o
CC base/qbman/qman_driver.o
CC mc/dpio.o
CC pci_common.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC base/qbman/dpaa_alloc.o
CC pci_common_uio.o
CC base/qbman/dpaa_sys.o
CC linux/vmbus_bus.o
CC mc/dpci.o
SYMLINK-FILE include/rte_bus_vdev.h
CC linux/vmbus_uio.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC vmbus_common.o
CC vdev.o
CC vdev_params.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC vmbus_common_uio.o
CC fslmc_bus.o
Building modules, stage 2.
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
AR librte_bus_pci.a
LD portal/dpaa2_hw_dpio.o
INSTALL-LIB librte_bus_pci.a
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
LD portal/dpaa2_hw_dpci.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
MODPOST 1 modules
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC rte_mempool_stack.o
CC dpaa2_hw_mempool.o
CC rte_mempool_bucket.o
CC rte_mempool_ring.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC dpaa_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
LD otx2_mempool.o
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/baseband/null
== Build drivers/baseband/turbo_sw
== Build drivers/baseband/fpga_lte_fec
== Build drivers/net/ark
== Build drivers/net/af_packet
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/atlantic
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa2
== Build drivers/net/dpaa
CC qat_comp.o
CC qat_comp_pmd.o
CC qat_device.o
== Build drivers/net/ena
== Build drivers/net/e1000
CC qat_common.o
== Build drivers/net/enic
CC qat_logs.o
== Build drivers/net/enetc
CC qat_qp.o
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/i40e
== Build drivers/net/hns3
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
== Build drivers/net/memif
== Build drivers/net/netvsc
== Build drivers/net/nfp
== Build drivers/net/bnxt
== Build drivers/crypto/octeontx
== Build drivers/compress/octeontx
== Build drivers/crypto/scheduler
CC rte_eth_af_packet.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC axgbe_ethdev.o
SYMLINK-FILE include/rte_eth_bond.h
CC bbdev_turbo_software.o
CC ena_ethdev.o
CC atl_rxtx.o
CC iavf_adminq.o
CC ipn3ke_ethdev.o
CC ark_ddm.o
SYMLINK-FILE include/fpga_lte_fec.h
CC enetc_ethdev.o
CC base/dpaa2_hw_dpni.o
SYMLINK-FILE include/rte_avp_common.h
CC lio_ethdev.o
CC hinic_pmd_api_cmd.o
CC bbdev_null.o
CC hns3_ethdev.o
CC failsafe.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
SYMLINK-FILE include/rte_pmd_dpaa.h
CC fpga_lte_fec.o
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_avp_fifo.h
CC rte_eth_bond_api.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC rte_eth_memif.o
CC cxgbe_ethdev.o
CC nfp_cppcore.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC hn_ethdev.o
CC enic_ethdev.o
CC dpaa_ethdev.o
CC avp_ethdev.o
CC bnxt_cpr.o
CC fm10k_ethdev.o
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ice.h
CC otx_cryptodev.o
CC e1000_80003es2lan.o
CC ice_controlq.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
SYMLINK-FILE include/rte_pmd_ixgbe.h
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC ixgbe_common.o
CC scheduler_pmd.o
CC ark_ethdev.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
CC scheduler_pmd_ops.o
LD qat_device.o
CC enetc_rxtx.o
CC nfp_cpp_pcie_ops.o
CC e1000_82540.o
CC nfp_mutex.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
LD otx_cryptodev.o
CC lio_rxtx.o
CC otx_cryptodev_capabilities.o
CC e1000_82541.o
CC bnxt_ethdev.o
CC dpaa2_rxtx.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC dpaa2_ethdev.o
CC hinic_pmd_cfg.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
LD axgbe_ethdev.o
CC axgbe_dev.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
LD bbdev_null.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
AR librte_pmd_bbdev_null.a
LD ipn3ke_ethdev.o
CC rte_cryptodev_scheduler.o
INSTALL-LIB librte_pmd_bbdev_null.a
CC scheduler_roundrobin.o
CC ipn3ke_representor.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD enic_ethdev.o
CC scheduler_pkt_size_distr.o
LD hn_ethdev.o
CC enic_main.o
CC hn_rxtx.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC rte_eth_bond_pmd.o
LD otx_zip_pmd.o
LD bbdev_turbo_software.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC otx_zip.o
LD ark_ethdev.o
AR librte_pmd_bbdev_turbo_sw.a
CC e1000_82542.o
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC ark_ethdev_rx.o
CC ark_ethdev_tx.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD enetc_ethdev.o
LD dpaa_ethdev.o
CC fm10k_rxtx.o
CC dpaa_rxtx.o
AR librte_pmd_enetc.a
CC fm10k_pf.o
INSTALL-LIB librte_pmd_enetc.a
CC fm10k_tlv.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
CC otx_cryptodev_hw_access.o
LD lio_ethdev.o
CC e1000_82543.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC e1000_82571.o
LD fpga_lte_fec.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC e1000_82575.o
CC hinic_pmd_cmdq.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
CC nfp_resource.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_eqs.o
CC atl_ethdev.o
CC atl_hw_regs.o
CC fm10k_common.o
CC fm10k_mbx.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC memif_socket.o
CC ixgbe_82598.o
CC ixgbe_82599.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC ixgbe_x540.o
CC ixgbe_x550.o
CC ixgbe_phy.o
CC ixgbe_api.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
CC otx_cryptodev_mbox.o
CC iavf_common.o
CC iavf_ethdev.o
CC nfp_crc.o
CC iavf_vchnl.o
CC ixgbe_vf.o
CC ixgbe_hv_vf.o
CC axgbe_mdio.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
CC ixgbe_dcb.o
LD hns3_ethdev.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
CC nfp_mip.o
CC hns3_ethdev_vf.o
LD fm10k_ethdev.o
CC i40e_common.o
CC i40e_diag.o
CC hinic_pmd_hwdev.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD dpaa2_ethdev.o
CC i40e_hmc.o
CC i40e_lan_hmc.o
CC e1000_i210.o
CC e1000_api.o
CC dpaa2_flow.o
CC ipn3ke_tm.o
CC ice_common.o
CC ice_sched.o
CC ipn3ke_flow.o
CC ark_mpu.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
CC lio_23xx_vf.o
CC axgbe_phy_impl.o
CC otx_cryptodev_ops.o
LD cxgbevf_ethdev.o
CC cxgbe_main.o
CC axgbe_i2c.o
CC e1000_ich8lan.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC hns3_cmd.o
CC ark_pktchkr.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC ena_com.o
CC nfp_nffw.o
CC nfp_hwinfo.o
CC scheduler_failover.o
CC iavf_rxtx.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
CC ixgbe_dcb_82599.o
LD atl_ethdev.o
CC enic_rxtx.o
CC hw_atl_utils.o
CC hw_atl_llh.o
CC hw_atl_utils_fw2x.o
CC iavf_rxtx_vec_sse.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
LD bnxt_ethdev.o
CC bnxt_filter.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC ixgbe_dcb_82598.o
LD hns3_ethdev_vf.o
CC e1000_logs.o
CC e1000_mac.o
CC hns3_mbx.o
CC hinic_pmd_hwif.o
CC lio_mbox.o
CC hinic_pmd_mgmt.o
CC hns3_rxtx.o
CC hns3_rss.o
CC axgbe_rxtx.o
CC fm10k_vf.o
CC fm10k_api.o
CC nfp_rtsym.o
CC ark_pktdir.o
CC ixgbe_mbx.o
CC ixgbe_rxtx.o
CC scheduler_multicore.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC ixgbe_ethdev.o
CC e1000_manage.o
CC fm10k_rxtx_vec.o
CC ena_eth_com.o
CC hns3_flow.o
CC dpaa2_mux.o
CC hn_rndis.o
CC bnxt_flow.o
CC hn_nvs.o
CC hn_vf.o
CC hns3_fdir.o
CC ixgbe_fdir.o
CC ixgbe_pf.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
CC cxgbevf_main.o
LD avp_ethdev.o
CC hw_atl_b0.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
AR librte_pmd_ena.a
CC rte_pmd_atlantic.o
INSTALL-LIB librte_pmd_ena.a
CC axgbe_rxtx_vec_sse.o
CC ice_switch.o
CC ice_nvm.o
CC hinic_pmd_niccfg.o
CC e1000_mbx.o
CC ark_pktgen.o
CC nfp_nsp.o
CC nfp_nsp_cmds.o
AR librte_pmd_dpaa.a
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_dpaa.a
PMDINFO rte_eth_bond_pmd.o.pmd.c
INSTALL-LIB librte_pmd_lio.a
CC rte_eth_bond_pmd.o.pmd.o
CC nfp_nsp_eth.o
CC nfp_net.o
LD rte_eth_bond_pmd.o
CC ice_flex_pipe.o
CC rte_eth_bond_args.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC dpaa2_sparser.o
CC e1000_nvm.o
CC i40e_nvm.o
CC sge.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC cxgbe_filter.o
CC ark_rqp.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
== Build drivers/net/null
== Build drivers/net/octeontx
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC ark_udm.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
CC i40e_dcb.o
CC i40e_ethdev.o
CC e1000_osdep.o
CC e1000_phy.o
CC rte_eth_bond_8023ad.o
AR librte_pmd_ark.a
CC rte_eth_bond_alb.o
INSTALL-LIB librte_pmd_ark.a
CC rte_eth_bond_flow.o
== Build drivers/net/octeontx2
CC rte_eth_null.o
== Build drivers/net/qede
CC e1000_vf.o
CC i40e_rxtx.o
CC octeontx_rxtx.o
CC igb_ethdev.o
CC ixgbe_flow.o
CC null_crypto_pmd.o
CC igb_rxtx.o
CC mc/dpni.o
CC dpaa2_sec_dpseci.o
CC enic_clsf.o
CC dpaa_sec.o
CC bnxt_hwrm.o
CC hns3_intr.o
CC hns3_stats.o
CC hinic_pmd_nicio.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC ixgbe_rxtx_vec_sse.o
CC ixgbe_ipsec.o
CC otx2_rx.o
CC ecore_dev.o
CC ecore_hw.o
CC octeontx_pkovf.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
== Build drivers/net/ring
CC hinic_pmd_wq.o
CC hinic_pmd_ethdev.o
CC hinic_pmd_rx.o
CC mc/dpkg.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC octeontx_pkivf.o
CC hinic_pmd_tx.o
CC igb_pf.o
CC mc/dpdmux.o
AR librte_pmd_fm10k.a
CC enic_res.o
INSTALL-LIB librte_pmd_fm10k.a
CC i40e_ethdev_vf.o
SYMLINK-FILE include/rte_eth_ring.h
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC rte_eth_ring.o
LD octeontx_pkivf.o
CC failsafe_args.o
CC failsafe_eal.o
CC octeontx_bgx.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
LD null_crypto_pmd.o
CC null_crypto_pmd_ops.o
CC octeontx_ethdev.o
CC hns3_regs.o
CC ecore_cxt.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC ecore_l2.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC ecore_sp_commands.o
== Build drivers/net/sfc
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC enic_flow.o
CC sfc_ethdev.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC base/vnic_cq.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC ecore_init_ops.o
CC base/vnic_wq.o
CC rte_pmd_ixgbe.o
CC failsafe_ops.o
CC hns3_dcb.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
AR librte_pmd_null_crypto.a
CC hns3_mp.o
INSTALL-LIB librte_pmd_null_crypto.a
== Build drivers/net/tap
== Build drivers/net/thunderx
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
== Build drivers/net/vdev_netvsc
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC cxgbe_flow.o
CC t4_hw.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
CC ixgbe_tm.o
CC nicvf_rxtx.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC vdev_netvsc.o
== Build drivers/crypto/caam_jr
CC ecore_mcp.o
CC ecore_int.o
CC igb_flow.o
CC rte_eth_tap.o
CC em_ethdev.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC tap_flow.o
CC ixgbe_vf_representor.o
CC ecore_dcbx.o
CC bcm_osal.o
CC caam_jr.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC nicvf_hw.o
CC nicvf_mbox.o
CC base/vnic_dev.o
CC ecore_sriov.o
CC ecore_vf.o
CC qede_ethdev.o
CC qede_main.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC qede_rxtx.o
CC qede_filter.o
== Build drivers/net/virtio
== Build drivers/net/vmxnet3
== Build drivers/net/kni
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
== Build drivers/crypto/virtio
LD vdev_netvsc.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
AR librte_pmd_vdev_netvsc.a
CC base/vnic_intr.o
CC base/vnic_rq.o
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC otx2_tx.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC otx2_tm.o
CC otx2_rss.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC otx2_mac.o
LD sfc_ethdev.o
CC sfc_kvargs.o
CC virtqueue.o
CC rte_eth_kni.o
CC vmxnet3_rxtx.o
CC virtio_pci.o
CC virtqueue.o
CC failsafe_rxtx.o
CC em_rxtx.o
CC failsafe_ether.o
CC failsafe_flow.o
CC nicvf_ethdev.o
CC caam_jr_capabilities.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC caam_jr_hw.o
CC sfc.o
CC sfc_mcdi.o
CC sfc_intr.o
CC sfc_ev.o
CC sfc_port.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC sfc_rx.o
LD rte_eth_kni.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC virtio_pci.o
CC ice_flow.o
CC vmxnet3_ethdev.o
CC bnxt_ring.o
CC bnxt_rxq.o
CC bnxt_rxr.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
CC sfc_tx.o
CC virtio_rxtx.o
CC caam_jr_uio.o
CC tap_netlink.o
CC enic_rxtx_vec_avx2.o
CC bnxt_stats.o
CC failsafe_intr.o
LD qede_ethdev.o
CC tap_tcmsgs.o
CC clip_tbl.o
CC sfc_tso.o
CC tap_bpf_api.o
CC mps_tcam.o
CC virtio_ethdev.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
CC virtio_rxtx_simple.o
CC tap_intr.o
CC virtio_rxtx.o
AR librte_pmd_dpaa_sec.a
CC sfc_filter.o
INSTALL-LIB librte_pmd_dpaa_sec.a
CC sfc_flow.o
CC sfc_dp.o
== Build drivers/crypto/nitrox
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
CC sfc_ef10_rx.o
LD nicvf_ethdev.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC sfc_ef10_essb_rx.o
CC nitrox_device.o
LD vmxnet3_ethdev.o
CC l2t.o
CC nitrox_hal.o
CC nicvf_bsvf.o
CC otx2_ptp.o
CC nitrox_logs.o
CC nitrox_sym.o
CC nitrox_sym_capabilities.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_e1000.a
CC nicvf_svf.o
CC bnxt_txq.o
CC nitrox_sym_reqmgr.o
CC i40e_pf.o
CC t4vf_hw.o
INSTALL-LIB librte_pmd_e1000.a
CC nitrox_qp.o
CC i40e_fdir.o
CC ice_dcb.o
CC sfc_ef10_tx.o
== Build drivers/net/softnic
== Build drivers/net/vhost
== Build drivers/net/ifc
CC otx2_flow.o
PMDINFO nitrox_device.o.pmd.c
PMDINFO dpaa2_sec_dpseci.o.pmd.c
PMDINFO rte_eth_tap.o.pmd.c
CC nitrox_device.o.pmd.o
CC dpaa2_sec_dpseci.o.pmd.o
CC rte_eth_tap.o.pmd.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC i40e_flow.o
CC ifcvf_vdpa.o
SYMLINK-FILE include/rte_eth_softnic.h
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_softnic.o
CC rte_eth_vhost.o
LD rte_eth_tap.o
LD dpaa2_sec_dpseci.o
LD nitrox_device.o
AR librte_pmd_thunderx_nicvf.a
AR librte_pmd_enic.a
CC rte_eth_softnic_mempool.o
CC bnxt_txr.o
CC ice_fdir.o
CC virtio_cryptodev.o
CC efx_bootcfg.o
INSTALL-LIB librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_enic.a
CC rte_eth_softnic_swq.o
CC rte_eth_softnic_link.o
AR librte_pmd_tap.a
CC bnxt_vnic.o
CC ice_ethdev.o
CC rte_eth_softnic_tm.o
CC mc/dpseci.o
INSTALL-LIB librte_pmd_tap.a
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC efx_crc32.o
CC otx2_link.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC ice_switch_filter.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
AR librte_pmd_caam_jr.a
AR librte_pmd_dpaa2_sec.a
CC rte_eth_softnic_tap.o
AR librte_pmd_vmxnet3_uio.a
CC bnxt_irq.o
INSTALL-LIB librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC rte_eth_softnic_action.o
CC bnxt_util.o
CC rte_eth_softnic_pipeline.o
CC virtio_rxtx_simple_sse.o
CC rte_pmd_bnxt.o
AR librte_pmd_nitrox.a
CC rte_eth_softnic_thread.o
CC virtio_user/vhost_user.o
INSTALL-LIB librte_pmd_nitrox.a
CC virtio_user/vhost_kernel.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
CC otx2_vlan.o
LD rte_eth_softnic.o
AR librte_pmd_cxgbe.a
AR librte_pmd_qede.a
CC otx2_stats.o
CC rte_eth_softnic_cli.o
INSTALL-LIB librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_qede.a
CC rte_pmd_i40e.o
CC i40e_tm.o
CC ice_rxtx_vec_avx2.o
CC ice_generic_flow.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
CC efx_ev.o
CC rte_eth_softnic_flow.o
CC bnxt_rxtx_vec_sse.o
LD ifcvf_vdpa.o
CC efx_evb.o
CC efx_filter.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC rte_eth_softnic_meter.o
CC ifcvf.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC rte_eth_softnic_cryptodev.o
LD virtio_cryptodev.o
CC parser.o
CC virtio_user_ethdev.o
AR librte_pmd_ifc.a
CC conn.o
AR librte_pmd_virtio_crypto.a
CC otx2_lookup.o
CC efx_hash.o
INSTALL-LIB librte_pmd_ifc.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC efx_intr.o
CC efx_lic.o
CC efx_mac.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
LD rte_eth_vhost.o
CC i40e_vf_representor.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC efx_mcdi.o
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC otx2_flow_utils.o
CC efx_proxy.o
CC efx_rx.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC efx_sram.o
CC efx_tunnel.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC otx2_ethdev_irq.o
LD virtio_user_ethdev.o
CC otx2_ethdev_ops.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
CC otx2_ethdev_debug.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC otx2_ethdev_devargs.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
AR librte_pmd_virtio.a
AR librte_pmd_softnic.a
LD otx2_ethdev.o
INSTALL-LIB librte_pmd_virtio.a
INSTALL-LIB librte_pmd_softnic.a
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx2
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dpaa_eventdev.o
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC otx2_evdev.o
CC dpaa2_eventdev_selftest.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC skeleton_eventdev.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC sw_evdev.o
CC timvf_probe.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC opdl_ring.o
CC opdl_evdev.o
CC sw_evdev_xstats.o
CC opdl_evdev_init.o
CC sw_evdev_selftest.o
CC opdl_evdev_xstats.o
CC opdl_test.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO ssovf_probe.o.pmd.c
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC ssovf_probe.o.pmd.o
CC dpaa2_hw_dpcon.o.pmd.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD ssovf_probe.o
LD dpaa2_hw_dpcon.o
LD timvf_probe.o
LD opdl_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/ioat
== Build drivers/raw/ifpga
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC ntb.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC dpaa2_cmdif.o
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC otx2_dpi_rawdev.o
CC ifpga_feature_dev.o
CC otx2_dpi_msg.o
CC ifpga_fme.o
CC otx2_dpi_test.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
LD ifpga_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/pdump
== Build app/test-pipeline
== Build app/test-cmdline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-eventdev
== Build app/test-crypto-perf
CC main.o
CC main.o
CC main.o
CC cmdline_test.o
CC commands.o
CC main.o
CC config.o
CC init.o
CC runtime.o
CC pipeline_stub.o
CC pipeline_hash.o
CC testpmd.o
CC pipeline_lpm.o
CC parameters.o
CC main.o
CC pipeline_lpm_ipv6.o
CC comp_perf_options_parse.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC pipeline_acl.o
CC comp_perf_test_common.o
CC main.o
CC main.o
CC evt_main.o
CC cperf_ops.o
CC test_bbdev.o
CC evt_options.o
CC cperf_options_parsing.o
CC cmdline.o
CC evt_test.o
CC parser.o
CC cperf_test_vectors.o
CC cperf_test_throughput.o
CC test_bbdev_perf.o
CC test_order_common.o
CC test_bbdev_vector.o
CC cmdline_flow.o
CC cmdline_mtr.o
LD cmdline_test
CC cmdline_tm.o
CC commands.o
CC config.o
CC test_order_queue.o
CC test_order_atq.o
LD testacl
LD dpdk-procinfo
CC test_perf_common.o
CC test_perf_queue.o
CC iofwd.o
CC cperf_test_latency.o
CC macfwd.o
CC macswap.o
CC flowgen.o
CC rxonly.o
CC txonly.o
CC test_perf_atq.o
CC csumonly.o
CC test.o
CC cperf_test_pmd_cyclecount.o
CC resource.o
CC test_resource.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC cperf_test_verify.o
CC icmpecho.o
LD dpdk-pdump
CC noisy_vnf.o
CC test_prefetch.o
LD testpipeline
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
CC test_barrier.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC bpf_cmd.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
CC test_spinlock.o
CC test_ticketlock.o
CC util.o
CC softnicfwd.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_stack.o
CC test_rwlock.o
CC test_stack_perf.o
LD dpdk-test-eventdev
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
LD dpdk-test-crypto-perf
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
LD testpmd
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
18/10/2019 06:11:35 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
18/10/2019 06:11:47 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:11:47 dut.10.240.176.196: set fwd rxonly
18/10/2019 06:11:47 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
18/10/2019 06:11:47 dut.10.240.176.196: set verbose 1
18/10/2019 06:11:48 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
18/10/2019 06:11:48 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:11:48 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:11:53 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:11:53 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:11:58 TestVxlan: send vxlan pkts [outer_udp_dst = 1234]
18/10/2019 06:11:58 dut.10.240.176.196: start
18/10/2019 06:11:58 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:11:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350318.43 root@10.240.176.173:/tmp/tester/
18/10/2019 06:11:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350318.43 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571350318.43
18/10/2019 06:12:01 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63338, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=1234, sport=63, len=26, chksum=23610)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:12:03 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:12:03 TestVxlan: send vxlan pkts [inner_l4_type = UDP]
18/10/2019 06:12:03 dut.10.240.176.196: start
18/10/2019 06:12:04 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:12:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350324.04 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:05 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350324.04 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:06 tester: python /tmp/tester/scapy_ens160f0.cmd1571350324.04
18/10/2019 06:12:07 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:12:09 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=110 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:12:09 TestVxlan: send vxlan pkts [inner_l4_type = TCP]
18/10/2019 06:12:09 dut.10.240.176.196: start
18/10/2019 06:12:09 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:12:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350329.62 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:10 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350329.62 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:12 tester: python /tmp/tester/scapy_ens160f0.cmd1571350329.62
18/10/2019 06:12:13 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63276, len=108, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=88, chksum=40309)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:12:15 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:12:15 TestVxlan: send vxlan pkts [inner_l4_type = SCTP]
18/10/2019 06:12:15 dut.10.240.176.196: start
18/10/2019 06:12:15 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:12:15 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350335.23 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:16 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350335.23 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:17 tester: python /tmp/tester/scapy_ens160f0.cmd1571350335.23
18/10/2019 06:12:18 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=2048)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63270, len=114, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=94, chksum=4564)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
18/10/2019 06:12:20 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x0800 - length=128 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - VXLAN packet: packet type =24721, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:12:20 TestVxlan: send vxlan pkts [outer_vlan = 1]
18/10/2019 06:12:20 dut.10.240.176.196: start
18/10/2019 06:12:20 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:12:20 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350340.83 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:22 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350340.83 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:23 tester: python /tmp/tester/scapy_ens160f0.cmd1571350340.83
18/10/2019 06:12:24 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63288, len=96, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=76, chksum=40332)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:12:26 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=114 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:12:26 TestVxlan: send vxlan pkts [outer_vlan = 1][inner_vlan = 1]
18/10/2019 06:12:26 dut.10.240.176.196: start
18/10/2019 06:12:26 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:12:26 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350346.43 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:27 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350346.43 root@10.240.176.173:/tmp/tester/
18/10/2019 06:12:29 tester: python /tmp/tester/scapy_ens160f0.cmd1571350346.43
18/10/2019 06:12:29 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.1.1', proto=17, tos=0, dst='192.168.1.2', chksum=63284, len=100, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=4789, sport=63, len=80, chksum=7299)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:12:31 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x8100 - length=118 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER_VLAN INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:12:31 dut.10.240.176.196: stop
18/10/2019 06:12:32 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 6 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 6 RX-dropped: 0 RX-total: 6
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:12:32 dut.10.240.176.196: quit
18/10/2019 06:12:35 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
18/10/2019 06:12:35 dut.10.240.176.196: cat config/common_base
18/10/2019 06:12:35 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
18/10/2019 06:12:35 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
18/10/2019 06:12:35 dut.10.240.176.196:
18/10/2019 06:12:35 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
18/10/2019 06:12:35 dut.10.240.176.196:
18/10/2019 06:12:35 dut.10.240.176.196: export RTE_SDK=`pwd`
18/10/2019 06:12:36 dut.10.240.176.196:
18/10/2019 06:12:36 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
18/10/2019 06:12:36 dut.10.240.176.196:
18/10/2019 06:12:36 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
18/10/2019 06:12:36 dut.10.240.176.196:
18/10/2019 06:12:36 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
18/10/2019 06:12:36 dut.10.240.176.196:
18/10/2019 06:12:36 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
18/10/2019 06:12:36 dut.10.240.176.196:
18/10/2019 06:12:36 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
18/10/2019 06:14:37 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_ring
== Build lib/librte_pci
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_stack.o
CC rte_stack_std.o
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_meter.o
CC rte_cfgfile.o
CC rte_stack_lf.o
CC rte_jobstats.o
SYMLINK-FILE include/rte_timer.h
CC rte_timer.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_rcu_qsbr.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_pci.h
SYMLINK-FILE include/rte_metrics.h
CC rte_rcu_qsbr.o
CC rte_pci.o
CC rte_ring.o
CC rte_metrics.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_cuckoo_hash.o
CC rte_mempool_ops.o
CC rte_fbk_hash.o
CC rte_mempool_ops_default.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_bbdev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_bbdev.o
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
CC rte_compressdev_pmd.o
SYMLINK-FILE include/rte_sctp.h
CC rte_comp.o
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_hash.a
INSTALL-LIB librte_hash.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/rte_tm_driver.h
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
CC ethdev_private.o
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
CC rte_ethdev.o
CC rte_class_eth.o
SYMLINK-FILE include/cmdline_parse_etheraddr.h
CC rte_flow.o
SYMLINK-FILE include/cmdline_parse_string.h
CC rte_tm.o
CC rte_mtr.o
SYMLINK-FILE include/cmdline_rdline.h
CC ethdev_profile.o
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC cmdline.o
AR librte_reorder.a
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
INSTALL-LIB librte_reorder.a
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
SYMLINK-FILE include/rte_member.h
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
CC rte_lpm6.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_gro.h
CC rte_gro.o
CC gro_tcp4.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
CC rte_security.o
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_ip_frag.h
CC rte_pdump.o
CC rte_gso.o
CC rte_ipv4_fragmentation.o
CC gso_common.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_ipv6_fragmentation.o
CC gso_tcp4.o
CC rte_ipv4_reassembly.o
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_distributor.h
CC rte_kni.o
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_rawdev_pmd.h
CC gso_udp4.o
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_eventdev_pmd.h
CC rte_distributor_v20.o
SYMLINK-FILE include/rte_bitrate.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC rte_ipv6_reassembly.o
CC rte_distributor.o
CC rte_bitrate.o
CC rte_ip_frag_common.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_latencystats.h
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC bpf.o
CC ip_frag_internal.o
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_event_ring.h
CC bpf_exec.o
CC rte_latencystats.o
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC bpf_load.o
CC bpf_pkt.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC bpf_validate.o
CC fd_man.o
CC bpf_jit_x86.o
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC iotlb.o
CC rte_eventdev.o
CC socket.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC vhost.o
CC vhost_user.o
CC virtio_net.o
CC vdpa.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
CC vhost_crypto.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_gro.a
INSTALL-LIB librte_gro.a
AR librte_security.a
INSTALL-LIB librte_security.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
AR librte_kni.a
INSTALL-LIB librte_ip_frag.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_gso.a
AR librte_distributor.a
INSTALL-LIB librte_gso.a
INSTALL-LIB librte_distributor.a
AR librte_bpf.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
INSTALL-LIB librte_bpf.a
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
SYMLINK-FILE include/rte_flow_classify.h
CC rte_pipeline.o
CC rte_flow_classify.o
CC rte_port_in_action.o
CC rte_flow_classify_parse.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC otx2_dev.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
SYMLINK-FILE include/dpaax_iova_table.h
CC octeontx_mbox.o
CC dpaax_iova_table.o
CC cpt_pmd_ops_helper.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
Building modules, stage 2.
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_pci.h
SYMLINK-FILE include/rte_bus_vdev.h
CC linux/pci.o
CC linux/pci_uio.o
CC vdev.o
CC linux/pci_vfio.o
CC pci_params.o
CC vdev_params.o
CC pci_common.o
CC pci_common_uio.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpbp.o
CC mc/dpmng.o
CC mc/dpio.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC mc/dpci.o
CC mc/dpdmai.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC portal/dpaa2_hw_dpio.o
CC linux/vmbus_bus.o
CC vmbus_common.o
CC linux/vmbus_uio.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC dpaa_bus.o
CC fslmc_bus.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC base/fman/netcfg_layer.o
CC base/fman/fman.o
CC base/qbman/process.o
CC base/qbman/bman.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
MODPOST 1 modules
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vmbus.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
INSTALL-LIB librte_bus_vmbus.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpbp.o
MODPOST 1 modules
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD portal/dpaa2_hw_dpci.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/dpaa
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC dpaa_mempool.o
CC rte_mempool_ring.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC rte_mempool_stack.o
CC otx2_mempool_debug.o
CC rte_mempool_bucket.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC rte_mempool_octeontx.o
CC octeontx_fpavf.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/compress/octeontx
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/dpaa2
== Build drivers/net/ena
== Build drivers/net/enetc
== Build drivers/net/e1000
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/crypto/octeontx
== Build drivers/crypto/scheduler
== Build drivers/crypto/null
== Build drivers/baseband/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/baseband/turbo_sw
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/net/ixgbe
== Build drivers/baseband/fpga_lte_fec
== Build drivers/crypto/virtio
== Build drivers/net/liquidio
== Build drivers/net/memif
== Build drivers/net/netvsc
== Build drivers/crypto/nitrox
CC qat_comp.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC rte_eth_af_packet.o
CC atl_rxtx.o
CC ark_ddm.o
CC otx_zip_pmd.o
CC enetc_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC dpaa_ethdev.o
CC axgbe_ethdev.o
CC ipn3ke_ethdev.o
CC ena_ethdev.o
CC failsafe.o
SYMLINK-FILE include/rte_eth_bond.h
CC otx_cryptodev.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC dpaa_sec.o
CC hns3_ethdev.o
CC bbdev_turbo_software.o
CC bbdev_null.o
CC virtqueue.o
CC lio_ethdev.o
CC cxgbe_ethdev.o
CC hn_ethdev.o
CC iavf_adminq.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
SYMLINK-FILE include/rte_avp_common.h
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC hinic_pmd_api_cmd.o
CC null_crypto_pmd.o
CC base/dpaa2_hw_dpni.o
SYMLINK-FILE include/fpga_lte_fec.h
CC caam_jr.o
CC nitrox_device.o
CC enic_ethdev.o
CC scheduler_pmd.o
CC fpga_lte_fec.o
SYMLINK-FILE include/rte_avp_fifo.h
CC rte_eth_bond_api.o
CC rte_eth_memif.o
CC dpaa2_sec_dpseci.o
CC avp_ethdev.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_ice.h
CC e1000_80003es2lan.o
CC i40e_adminq.o
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD nitrox_device.o
CC nitrox_hal.o
CC e1000_82540.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD otx_cryptodev.o
CC otx_cryptodev_capabilities.o
CC nitrox_logs.o
CC e1000_82541.o
CC qat_comp_pmd.o
CC dpaa2_rxtx.o
CC nitrox_sym.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
LD failsafe.o
CC failsafe_args.o
CC scheduler_pmd_ops.o
CC hinic_pmd_cfg.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
LD axgbe_ethdev.o
PMDINFO null_crypto_pmd.o.pmd.c
PMDINFO ipn3ke_ethdev.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC ipn3ke_ethdev.o.pmd.o
LD bbdev_null.o
CC axgbe_dev.o
LD null_crypto_pmd.o
LD ipn3ke_ethdev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
== Build drivers/net/nfp
CC null_crypto_pmd_ops.o
CC ipn3ke_representor.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
CC hn_rxtx.o
CC virtio_pci.o
CC e1000_82542.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
LD otx_zip_pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
LD enic_ethdev.o
CC otx_zip.o
LD ark_ethdev.o
CC enic_main.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC ark_ethdev_rx.o
LD bbdev_turbo_software.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
CC rte_eth_bond_pmd.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
LD dpaa_ethdev.o
CC rte_eth_bond_args.o
CC dpaa_rxtx.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC nfp_cppcore.o
LD enetc_ethdev.o
CC otx_cryptodev_hw_access.o
CC enetc_rxtx.o
CC e1000_82543.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD lio_ethdev.o
LD rte_eth_memif.o
CC lio_rxtx.o
CC memif_socket.o
CC qat_device.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
LD fpga_lte_fec.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC qat_common.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
CC hinic_pmd_cmdq.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_eqs.o
CC atl_ethdev.o
CC e1000_82571.o
CC rte_cryptodev_scheduler.o
CC ixgbe_82598.o
CC failsafe_eal.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC virtio_rxtx.o
== Build drivers/net/bnxt
AR librte_pmd_null_crypto.a
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_null_crypto.a
CC nitrox_sym_capabilities.o
CC nitrox_sym_reqmgr.o
LD cxgbe_ethdev.o
CC ixgbe_82599.o
CC cxgbevf_ethdev.o
CC otx_cryptodev_mbox.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC axgbe_mdio.o
CC axgbe_phy_impl.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC qat_logs.o
CC iavf_common.o
CC e1000_82575.o
CC qat_qp.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
CC iavf_ethdev.o
LD hns3_ethdev.o
CC hns3_ethdev_vf.o
CC ixgbe_x540.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
LD fm10k_ethdev.o
CC hinic_pmd_hwdev.o
CC hinic_pmd_hwif.o
CC nfp_cpp_pcie_ops.o
CC fm10k_rxtx.o
CC i40e_common.o
CC failsafe_ops.o
CC ice_common.o
AR librte_pmd_memif.a
CC ipn3ke_tm.o
CC ipn3ke_flow.o
INSTALL-LIB librte_pmd_memif.a
CC nitrox_qp.o
CC otx_cryptodev_ops.o
CC ark_ethdev_tx.o
CC hinic_pmd_mgmt.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
CC hinic_pmd_niccfg.o
LD cxgbevf_ethdev.o
CC ixgbe_x550.o
CC cxgbe_main.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC ena_com.o
CC bnxt_ethdev.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC hinic_pmd_nicio.o
CC hinic_pmd_wq.o
CC atl_hw_regs.o
CC hw_atl_utils.o
CC e1000_i210.o
CC enic_rxtx.o
CC enic_clsf.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC hw_atl_llh.o
CC virtio_cryptodev.o
CC axgbe_i2c.o
CC e1000_api.o
CC lio_23xx_vf.o
CC nfp_mutex.o
CC fm10k_pf.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
CC ark_mpu.o
CC dpaa2_ethdev.o
LD hns3_ethdev_vf.o
CC ark_pktchkr.o
CC hns3_cmd.o
CC ixgbe_phy.o
CC e1000_ich8lan.o
== Build drivers/net/null
CC hw_atl_utils_fw2x.o
CC scheduler_roundrobin.o
CC hw_atl_b0.o
CC enic_res.o
CC enic_flow.o
CC ena_eth_com.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC base/vnic_cq.o
CC hinic_pmd_ethdev.o
CC hn_rndis.o
CC rte_eth_null.o
CC hn_nvs.o
CC ice_sched.o
CC axgbe_rxtx.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
CC lio_mbox.o
CC ice_switch.o
CC bnxt_filter.o
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC bnxt_flow.o
CC cxgbevf_main.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
== Build drivers/net/octeontx
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
== Build drivers/net/octeontx2
CC nfp_resource.o
== Build drivers/net/qede
CC hns3_mbx.o
CC hns3_rxtx.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
CC ixgbe_api.o
CC ark_pktdir.o
CC ark_pktgen.o
LD rte_eth_bond_pmd.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC octeontx_rxtx.o
CC rte_eth_bond_8023ad.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD virtio_cryptodev.o
CC otx2_rx.o
LD caam_jr.o
CC scheduler_pkt_size_distr.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC caam_jr_capabilities.o
CC ark_rqp.o
CC rte_pmd_atlantic.o
CC ecore_dev.o
CC fm10k_tlv.o
CC fm10k_common.o
CC rte_eth_bond_alb.o
CC ecore_hw.o
CC hn_vf.o
CC sge.o
PMDINFO iavf_ethdev.o.pmd.c
CC base/vnic_wq.o
CC iavf_ethdev.o.pmd.o
LD iavf_ethdev.o
CC iavf_vchnl.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC nfp_crc.o
CC iavf_rxtx.o
CC e1000_logs.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC ixgbe_vf.o
LD dpaa2_ethdev.o
CC nfp_mip.o
CC dpaa2_flow.o
CC dpaa2_mux.o
CC fm10k_mbx.o
CC fm10k_vf.o
CC ark_udm.o
CC hns3_rss.o
CC octeontx_pkovf.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
CC caam_jr_hw.o
LD hinic_pmd_ethdev.o
CC e1000_mac.o
CC hinic_pmd_rx.o
CC i40e_diag.o
CC i40e_hmc.o
CC i40e_lan_hmc.o
CC ixgbe_hv_vf.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC scheduler_failover.o
CC octeontx_pkivf.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
AR librte_pmd_atlantic.a
LD bnxt_ethdev.o
INSTALL-LIB librte_pmd_atlantic.a
CC octeontx_bgx.o
CC hns3_flow.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC ecore_cxt.o
== Build drivers/net/ring
CC bnxt_hwrm.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
== Build drivers/net/sfc
LD octeontx_pkivf.o
CC ixgbe_dcb.o
== Build drivers/net/tap
CC octeontx_ethdev.o
AR librte_pmd_netvsc.a
CC nfp_nffw.o
INSTALL-LIB librte_pmd_netvsc.a
CC fm10k_api.o
CC ixgbe_dcb_82599.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
CC base/vnic_dev.o
LD dpaa2_mux.o
CC caam_jr_uio.o
CC e1000_manage.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC fm10k_rxtx_vec.o
CC sfc_ethdev.o
CC sfc_kvargs.o
LD dpaa_sec.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC sfc.o
CC sfc_mcdi.o
CC axgbe_rxtx_vec_sse.o
CC hns3_fdir.o
CC rte_eth_tap.o
CC sfc_intr.o
CC ixgbe_dcb_82598.o
CC e1000_mbx.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
== Build drivers/net/thunderx
== Build drivers/net/vdev_netvsc
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
CC scheduler_multicore.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
== Build drivers/net/virtio
CC nfp_hwinfo.o
CC ixgbe_mbx.o
AR librte_pmd_caam_jr.a
CC e1000_nvm.o
INSTALL-LIB librte_pmd_caam_jr.a
== Build drivers/net/vmxnet3
== Build drivers/net/kni
CC i40e_nvm.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC nicvf_rxtx.o
LD dpaa2_sec_dpseci.o
CC vdev_netvsc.o
CC mc/dpseci.o
CC nicvf_hw.o
CC virtqueue.o
CC rte_eth_bond_flow.o
CC hinic_pmd_tx.o
CC virtio_pci.o
CC virtio_rxtx.o
CC dpaa2_sparser.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
CC rte_eth_kni.o
CC ixgbe_rxtx.o
CC vmxnet3_rxtx.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC hns3_intr.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC hns3_stats.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC hns3_regs.o
CC hns3_dcb.o
CC ecore_l2.o
CC e1000_osdep.o
CC e1000_phy.o
CC e1000_vf.o
CC igb_ethdev.o
CC sfc_ev.o
CC nfp_rtsym.o
CC nfp_nsp.o
CC nfp_nsp_cmds.o
CC nfp_nsp_eth.o
CC iavf_rxtx_vec_sse.o
CC mc/dpni.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
AR librte_pmd_bond.a
CC nfp_net.o
INSTALL-LIB librte_pmd_bond.a
LD rte_eth_kni.o
CC mc/dpkg.o
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_kni.a
CC mc/dpdmux.o
CC virtio_ethdev.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC nicvf_mbox.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
CC failsafe_rxtx.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC failsafe_ether.o
CC failsafe_flow.o
CC failsafe_intr.o
CC hns3_mp.o
CC igb_rxtx.o
CC base/vnic_intr.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC base/vnic_rq.o
LD sfc_ethdev.o
CC enic_rxtx_vec_avx2.o
CC nicvf_ethdev.o
CC otx2_tx.o
CC vmxnet3_ethdev.o
CC sfc_port.o
CC i40e_dcb.o
CC otx2_tm.o
CC otx2_rss.o
CC otx2_mac.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC sfc_rx.o
CC sfc_tx.o
CC sfc_tso.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC sfc_filter.o
CC sfc_flow.o
AR librte_pmd_hns3.a
== Build drivers/net/softnic
INSTALL-LIB librte_pmd_hns3.a
== Build drivers/net/vhost
CC sfc_dp.o
CC ecore_sp_commands.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC ecore_init_ops.o
CC ecore_mcp.o
CC ecore_int.o
SYMLINK-FILE include/rte_eth_vhost.h
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_vhost.o
CC rte_eth_softnic.o
CC igb_pf.o
CC otx2_ptp.o
CC i40e_ethdev.o
CC i40e_rxtx.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
CC i40e_rxtx_vec_sse.o
CC i40e_ethdev_vf.o
LD vmxnet3_ethdev.o
CC ecore_dcbx.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC bcm_osal.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
CC nicvf_bsvf.o
CC nicvf_svf.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC ecore_sriov.o
CC ecore_vf.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
CC qede_ethdev.o
== Build drivers/net/ifc
CC otx2_flow.o
LD virtio_ethdev.o
CC virtio_rxtx_simple.o
CC igb_flow.o
CC em_ethdev.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
LD rte_eth_softnic.o
CC sfc_ef10_rx.o
LD nfp_net.o
CC sfc_ef10_essb_rx.o
CC rte_eth_softnic_mempool.o
CC ice_nvm.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC tap_flow.o
CC tap_netlink.o
CC sfc_ef10_tx.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC efx_bootcfg.o
CC ifcvf_vdpa.o
CC ifcvf.o
CC qede_main.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC bnxt_ring.o
CC bnxt_rxq.o
CC cxgbe_filter.o
CC tap_tcmsgs.o
CC ice_flex_pipe.o
AR librte_pmd_iavf.a
CC tap_bpf_api.o
INSTALL-LIB librte_pmd_iavf.a
CC tap_intr.o
CC em_rxtx.o
CC qede_rxtx.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC qede_filter.o
LD rte_eth_tap.o
CC ice_flow.o
CC ice_dcb.o
CC rte_eth_softnic_swq.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC rte_eth_softnic_link.o
LD rte_eth_vhost.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC rte_eth_softnic_tm.o
LD em_ethdev.o
CC rte_eth_softnic_tap.o
CC ice_fdir.o
CC ice_ethdev.o
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
CC ice_rxtx_vec_avx2.o
CC rte_eth_softnic_action.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
CC ice_generic_flow.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD ifcvf_vdpa.o
LD i40e_ethdev_vf.o
CC rte_eth_softnic_pipeline.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC rte_eth_softnic_thread.o
CC rte_eth_softnic_cli.o
CC i40e_pf.o
AR librte_pmd_tap.a
INSTALL-LIB librte_pmd_tap.a
CC i40e_fdir.o
CC i40e_flow.o
CC rte_pmd_i40e.o
CC i40e_tm.o
CC bnxt_rxr.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
CC efx_crc32.o
LD qede_ethdev.o
AR librte_pmd_octeontx_crypto.a
CC rte_eth_softnic_flow.o
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC ixgbe_ethdev.o
CC ixgbe_fdir.o
CC cxgbe_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC parser.o
CC conn.o
CC ixgbe_pf.o
CC ixgbe_flow.o
CC ixgbe_rxtx_vec_sse.o
CC i40e_vf_representor.o
CC i40e_rxtx_vec_avx2.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC t4_hw.o
CC ixgbe_ipsec.o
CC clip_tbl.o
CC otx2_link.o
CC bnxt_stats.o
CC virtio_rxtx_simple_sse.o
CC bnxt_txq.o
CC virtio_user/vhost_user.o
CC mps_tcam.o
CC l2t.o
CC virtio_user/vhost_kernel.o
CC rte_pmd_ixgbe.o
CC t4vf_hw.o
CC bnxt_txr.o
CC ixgbe_tm.o
CC bnxt_vnic.o
CC ixgbe_vf_representor.o
CC bnxt_irq.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
CC efx_ev.o
CC efx_evb.o
CC efx_filter.o
CC efx_hash.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
CC otx2_vlan.o
CC otx2_stats.o
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
CC otx2_flow_parse.o
CC bnxt_rxtx_vec_sse.o
CC efx_intr.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
CC efx_mon.o
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC otx2_ethdev_debug.o
CC efx_nic.o
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC otx2_ethdev_devargs.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
CC efx_tunnel.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC efx_tx.o
CC efx_vpd.o
LD virtio_user_ethdev.o
CC mcdi_mon.o
CC siena_mac.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
LD ice_ethdev.o
AR librte_pmd_virtio.a
CC siena_mcdi.o
INSTALL-LIB librte_pmd_virtio.a
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
AR librte_pmd_ice.a
CC ef10_vpd.o
INSTALL-LIB librte_pmd_ice.a
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_octeontx2.a
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
INSTALL-LIB librte_pmd_octeontx2.a
LD ixgbe_ethdev.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa2
== Build drivers/event/dpaa
== Build drivers/event/opdl
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC dpaa2_hw_dpcon.o
CC otx2_tim_evdev.o
CC dpaa2_eventdev.o
CC otx2_evdev_selftest.o
CC dpaa2_eventdev_selftest.o
CC otx2_evdev_irq.o
CC dpaa_eventdev.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC skeleton_eventdev.o
CC sw_evdev.o
CC opdl_ring.o
CC sw_evdev_worker.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC opdl_evdev_xstats.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC sw_evdev_selftest.o
CC opdl_test.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD timvf_probe.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD ssovf_evdev.o
LD sw_evdev.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
LD dpaa2_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC dpaa2_cmdif.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
CC ioat_rawdev.o
CC dpaa2_qdma.o
CC ioat_rawdev_test.o
CC ntb.o
CC ntb_hw_intel.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/test-acl
== Build app/proc-info
== Build app/pdump
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC comp_perf_test_common.o
CC main.o
CC cmdline_test.o
CC commands.o
CC main.o
CC testpmd.o
CC config.o
CC evt_main.o
CC parameters.o
CC init.o
CC runtime.o
CC evt_options.o
CC cmdline.o
CC cmdline_flow.o
CC pipeline_stub.o
CC evt_test.o
CC pipeline_hash.o
CC parser.o
CC main.o
CC pipeline_lpm.o
CC cmdline_mtr.o
CC cperf_ops.o
CC main.o
CC cperf_options_parsing.o
CC cmdline_tm.o
CC main.o
CC test_bbdev.o
CC test_order_common.o
CC cperf_test_vectors.o
CC config.o
CC pipeline_lpm_ipv6.o
CC pipeline_acl.o
CC test_order_queue.o
LD cmdline_test
CC commands.o
CC test_bbdev_perf.o
CC cperf_test_throughput.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
INSTALL-APP cmdline_test
LD testacl
INSTALL-MAP cmdline_test.map
CC cperf_test_verify.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
CC test.o
CC test_order_atq.o
CC test_perf_common.o
CC resource.o
LD dpdk-procinfo
CC test_resource.o
CC iofwd.o
CC macfwd.o
CC macswap.o
CC test_perf_queue.o
CC flowgen.o
CC rxonly.o
CC test_prefetch.o
CC txonly.o
CC test_perf_atq.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC test_atomic.o
CC test_barrier.o
LD dpdk-pdump
CC test_bbdev_vector.o
LD testpipeline
CC csumonly.o
CC icmpecho.o
CC noisy_vnf.o
CC bpf_cmd.o
CC util.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC softnicfwd.o
CC test_malloc.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
INSTALL-APP testpipeline
CC test_ring.o
INSTALL-MAP testpipeline.map
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
LD dpdk-test-eventdev
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
LD dpdk-test-crypto-perf
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD testpmd
LD dpdk-test-compress-perf
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
18/10/2019 06:14:37 TestVxlan: Test Case test_vxlan_ipv4_detect Result PASSED:
18/10/2019 06:14:37 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:14:41 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Begin
18/10/2019 06:14:41 dut.10.240.176.196:
18/10/2019 06:14:41 tester:
18/10/2019 06:14:41 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --portmask=0x3 --enable-rx-cksum
18/10/2019 06:14:53 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:14:53 dut.10.240.176.196: vlan set filter off 0
18/10/2019 06:14:53 dut.10.240.176.196: vlan set filter off 0
18/10/2019 06:14:53 dut.10.240.176.196: set fwd csum
18/10/2019 06:14:53 dut.10.240.176.196: set fwd csum
Set csum packet forwarding mode
18/10/2019 06:14:53 dut.10.240.176.196: port stop all
18/10/2019 06:14:54 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:14:54 dut.10.240.176.196: csum set outer-ip hw 1
18/10/2019 06:14:54 dut.10.240.176.196: csum set outer-ip hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:14:54 dut.10.240.176.196: port start all
18/10/2019 06:14:54 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:14:54 dut.10.240.176.196: port stop all
18/10/2019 06:14:54 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:14:54 dut.10.240.176.196: csum set udp hw 1
18/10/2019 06:14:54 dut.10.240.176.196: csum set udp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:14:54 dut.10.240.176.196: port start all
18/10/2019 06:14:55 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:14:55 dut.10.240.176.196: port stop all
18/10/2019 06:14:55 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:14:55 dut.10.240.176.196: csum set tcp hw 1
18/10/2019 06:14:55 dut.10.240.176.196: csum set tcp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is sw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:14:55 dut.10.240.176.196: port start all
18/10/2019 06:14:55 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:14:55 dut.10.240.176.196: port stop all
18/10/2019 06:14:56 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:14:56 dut.10.240.176.196: csum set sctp hw 1
18/10/2019 06:14:56 dut.10.240.176.196: csum set sctp hw 1
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:14:56 dut.10.240.176.196: port start all
18/10/2019 06:14:56 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:14:56 dut.10.240.176.196: csum parse-tunnel on 1
18/10/2019 06:14:56 dut.10.240.176.196: csum parse-tunnel on 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is hw
Outer-Udp checksum offload is sw
18/10/2019 06:14:56 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:14:56 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:15:01 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:15:01 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:15:06 dut.10.240.176.196: port stop all
18/10/2019 06:15:07 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:15:07 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:15:07 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:15:07 dut.10.240.176.196: port start all
18/10/2019 06:15:07 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:15:07 dut.10.240.176.196: port stop all
18/10/2019 06:15:07 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:15:07 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:15:07 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:15:07 dut.10.240.176.196: port start all
18/10/2019 06:15:08 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:15:09 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:15:09 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
18/10/2019 06:15:09 dut.10.240.176.196: start
18/10/2019 06:15:09 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:15:09 tester: ls -d /tmp/tester/
18/10/2019 06:15:09 tester: /tmp/tester/
18/10/2019 06:15:09 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:15:09 tester:
18/10/2019 06:15:14 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350514.63 root@10.240.176.173:/tmp/tester/
18/10/2019 06:15:16 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350514.63 root@10.240.176.173:/tmp/tester/
18/10/2019 06:15:17 tester: python /tmp/tester/scapy_ens160f0.cmd1571350514.63
18/10/2019 06:15:18 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:15:24 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:15:24 dut.10.240.176.196: stop
18/10/2019 06:15:24 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:15:24 dut.10.240.176.196: port stop all
18/10/2019 06:15:25 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:15:25 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:15:25 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:15:25 dut.10.240.176.196: port start all
18/10/2019 06:15:25 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:15:25 dut.10.240.176.196: port stop all
18/10/2019 06:15:25 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:15:25 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:15:25 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:15:25 dut.10.240.176.196: port start all
18/10/2019 06:15:26 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:15:27 TestVxlan: chksums_ref{}
18/10/2019 06:15:27 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
18/10/2019 06:15:27 dut.10.240.176.196: start
18/10/2019 06:15:27 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:15:27 tester: ls -d /tmp/tester/
18/10/2019 06:15:27 tester: /tmp/tester/
18/10/2019 06:15:27 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:15:27 tester:
18/10/2019 06:15:32 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350532.77 root@10.240.176.173:/tmp/tester/
18/10/2019 06:15:34 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350532.77 root@10.240.176.173:/tmp/tester/
18/10/2019 06:15:35 tester: python /tmp/tester/scapy_ens160f0.cmd1571350532.77
18/10/2019 06:15:36 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:15:42 TestVxlan: chksums{}
18/10/2019 06:15:42 dut.10.240.176.196: stop
18/10/2019 06:15:43 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:15:43 dut.10.240.176.196: port stop all
18/10/2019 06:15:43 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:15:43 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:15:43 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:15:43 dut.10.240.176.196: port start all
18/10/2019 06:15:43 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:15:43 dut.10.240.176.196: port stop all
18/10/2019 06:15:43 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:15:43 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:15:44 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:15:44 dut.10.240.176.196: port start all
18/10/2019 06:15:44 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:15:45 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:15:45 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_ip_invalid = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0]
18/10/2019 06:15:45 dut.10.240.176.196: start
18/10/2019 06:15:45 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:15:45 tester: ls -d /tmp/tester/
18/10/2019 06:15:45 tester: /tmp/tester/
18/10/2019 06:15:45 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:15:45 tester:
18/10/2019 06:15:50 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350550.88 root@10.240.176.173:/tmp/tester/
18/10/2019 06:15:52 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350550.88 root@10.240.176.173:/tmp/tester/
18/10/2019 06:15:53 tester: python /tmp/tester/scapy_ens160f0.cmd1571350550.88
18/10/2019 06:15:54 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=6473)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=0, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:16:01 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:16:01 dut.10.240.176.196: stop
18/10/2019 06:16:01 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 1 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:16:01 dut.10.240.176.196: port stop all
18/10/2019 06:16:01 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:16:01 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:16:01 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:01 dut.10.240.176.196: port start all
18/10/2019 06:16:01 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:01 dut.10.240.176.196: port stop all
18/10/2019 06:16:02 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:16:02 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:16:02 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:02 dut.10.240.176.196: port start all
18/10/2019 06:16:02 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:03 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:16:03 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
18/10/2019 06:16:03 dut.10.240.176.196: start
18/10/2019 06:16:03 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:16:03 tester: ls -d /tmp/tester/
18/10/2019 06:16:03 tester: /tmp/tester/
18/10/2019 06:16:03 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:16:03 tester:
18/10/2019 06:16:09 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350569.03 root@10.240.176.173:/tmp/tester/
18/10/2019 06:16:10 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350569.03 root@10.240.176.173:/tmp/tester/
18/10/2019 06:16:11 tester: python /tmp/tester/scapy_ens160f0.cmd1571350569.03
18/10/2019 06:16:12 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:16:19 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:16:19 dut.10.240.176.196: stop
18/10/2019 06:16:19 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:16:19 dut.10.240.176.196: port stop all
18/10/2019 06:16:19 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:16:19 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:16:19 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:19 dut.10.240.176.196: port start all
18/10/2019 06:16:20 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:20 dut.10.240.176.196: port stop all
18/10/2019 06:16:20 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:16:20 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:16:20 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:20 dut.10.240.176.196: port start all
18/10/2019 06:16:20 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:21 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:16:21 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
18/10/2019 06:16:21 dut.10.240.176.196: start
18/10/2019 06:16:21 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:16:21 tester: ls -d /tmp/tester/
18/10/2019 06:16:22 tester: /tmp/tester/
18/10/2019 06:16:22 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:16:22 tester:
18/10/2019 06:16:27 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350587.2 root@10.240.176.173:/tmp/tester/
18/10/2019 06:16:28 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350587.2 root@10.240.176.173:/tmp/tester/
18/10/2019 06:16:29 tester: python /tmp/tester/scapy_ens160f0.cmd1571350587.2
18/10/2019 06:16:30 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:16:37 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:16:37 dut.10.240.176.196: stop
18/10/2019 06:16:37 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:16:37 dut.10.240.176.196: port stop all
18/10/2019 06:16:37 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:16:37 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:16:37 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:37 dut.10.240.176.196: port start all
18/10/2019 06:16:38 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:38 dut.10.240.176.196: port stop all
18/10/2019 06:16:38 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:16:38 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:16:38 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:38 dut.10.240.176.196: port start all
18/10/2019 06:16:38 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:39 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:16:39 TestVxlan: vxlan packet [outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
18/10/2019 06:16:39 dut.10.240.176.196: start
18/10/2019 06:16:39 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:16:39 tester: ls -d /tmp/tester/
18/10/2019 06:16:40 tester: /tmp/tester/
18/10/2019 06:16:40 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:16:40 tester:
18/10/2019 06:16:45 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350605.39 root@10.240.176.173:/tmp/tester/
18/10/2019 06:16:46 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350605.39 root@10.240.176.173:/tmp/tester/
18/10/2019 06:16:48 tester: python /tmp/tester/scapy_ens160f0.cmd1571350605.39
18/10/2019 06:16:48 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:16:55 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:16:55 dut.10.240.176.196: stop
18/10/2019 06:16:55 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:16:55 dut.10.240.176.196: port stop all
18/10/2019 06:16:55 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:16:55 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:16:56 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:56 dut.10.240.176.196: port start all
18/10/2019 06:16:56 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:56 dut.10.240.176.196: port stop all
18/10/2019 06:16:56 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:16:56 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:16:56 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:16:56 dut.10.240.176.196: port start all
18/10/2019 06:16:56 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:16:57 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:16:57 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = UDP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
18/10/2019 06:16:57 dut.10.240.176.196: start
18/10/2019 06:16:58 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:16:58 tester: ls -d /tmp/tester/
18/10/2019 06:16:58 tester: /tmp/tester/
18/10/2019 06:16:58 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:16:58 tester:
18/10/2019 06:17:03 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350623.53 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:04 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350623.53 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:06 tester: python /tmp/tester/scapy_ens160f0.cmd1571350623.53
18/10/2019 06:17:07 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=33470)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:17:13 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:17:13 dut.10.240.176.196: stop
18/10/2019 06:17:13 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:17:13 dut.10.240.176.196: port stop all
18/10/2019 06:17:14 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:17:14 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:17:14 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:17:14 dut.10.240.176.196: port start all
18/10/2019 06:17:14 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:17:14 dut.10.240.176.196: port stop all
18/10/2019 06:17:14 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:17:14 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:17:14 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:17:14 dut.10.240.176.196: port start all
18/10/2019 06:17:15 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:17:16 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:17:16 TestVxlan: vxlan packet [outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_type = TCP][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_invalid = 1]
18/10/2019 06:17:16 dut.10.240.176.196: start
18/10/2019 06:17:16 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:17:16 tester: ls -d /tmp/tester/
18/10/2019 06:17:16 tester: /tmp/tester/
18/10/2019 06:17:16 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:17:16 tester:
18/10/2019 06:17:21 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350641.73 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:23 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350641.73 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:24 tester: python /tmp/tester/scapy_ens160f0.cmd1571350641.73
18/10/2019 06:17:25 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=4804)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:17:31 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:17:31 dut.10.240.176.196: stop
18/10/2019 06:17:32 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:17:32 dut.10.240.176.196: port stop all
18/10/2019 06:17:32 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:17:32 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:17:32 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:17:32 dut.10.240.176.196: port start all
18/10/2019 06:17:32 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:17:32 dut.10.240.176.196: port stop all
18/10/2019 06:17:32 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:17:32 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:17:33 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:17:33 dut.10.240.176.196: port start all
18/10/2019 06:17:33 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:17:34 TestVxlan: chksums_ref{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:17:34 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
18/10/2019 06:17:34 dut.10.240.176.196: start
18/10/2019 06:17:34 dut.10.240.176.196: start
Port 1: link state change event
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:17:34 tester: ls -d /tmp/tester/
18/10/2019 06:17:34 tester: /tmp/tester/
18/10/2019 06:17:34 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:17:34 tester:
18/10/2019 06:17:39 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350659.91 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350659.91 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:42 tester: python /tmp/tester/scapy_ens160f0.cmd1571350659.91
18/10/2019 06:17:43 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=80, fl=0, tc=0)/UDP(dport=4789, sport=63, len=80, chksum=437)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=1)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:17:50 TestVxlan: chksums{'inner_ip': '0xf56a', 'inner_udp': '0x5ee1'}
18/10/2019 06:17:50 dut.10.240.176.196: stop
18/10/2019 06:17:50 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:17:50 dut.10.240.176.196: port stop all
18/10/2019 06:17:50 dut.10.240.176.196: port stop all
Stopping ports...
Port 0: link state change event
Checking link statuses...
Port 1: link state change event
Done
18/10/2019 06:17:50 dut.10.240.176.196: csum set outer-ip sw 0
18/10/2019 06:17:50 dut.10.240.176.196: csum set outer-ip sw 0
Parse tunnel is off
IP checksum offload is sw
UDP checksum offload is sw
TCP checksum offload is sw
SCTP checksum offload is sw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:17:50 dut.10.240.176.196: port start all
18/10/2019 06:17:50 dut.10.240.176.196: port start all
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:17:50 dut.10.240.176.196: port stop all
18/10/2019 06:17:51 dut.10.240.176.196: port stop all
Stopping ports...
Checking link statuses...
Done
18/10/2019 06:17:51 dut.10.240.176.196: csum set outer-ip sw 1
18/10/2019 06:17:51 dut.10.240.176.196: csum set outer-ip sw 1
Parse tunnel is on
IP checksum offload is sw
UDP checksum offload is hw
TCP checksum offload is hw
SCTP checksum offload is hw
Outer-Ip checksum offload is sw
Outer-Udp checksum offload is sw
18/10/2019 06:17:51 dut.10.240.176.196: port start all
18/10/2019 06:17:51 dut.10.240.176.196: port start all
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:17:52 TestVxlan: chksums_ref{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:17:52 TestVxlan: vxlan packet [inner_vlan = 1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP][outer_vlan = 1][outer_ip6_dst = FE80:0:0:0:0:0:0:1][inner_l4_invalid = 1]
18/10/2019 06:17:52 dut.10.240.176.196: start
18/10/2019 06:17:52 dut.10.240.176.196: start
csum packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
csum packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0xe Tx offloads=0x1001c
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0xe
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x1001c - TX RS bit threshold=32
18/10/2019 06:17:52 tester: ls -d /tmp/tester/
18/10/2019 06:17:52 tester: /tmp/tester/
18/10/2019 06:17:52 tester: rm -rf /tmp/tester/sniff_ens160f1.pcap
18/10/2019 06:17:52 tester:
18/10/2019 06:17:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350678.06 root@10.240.176.173:/tmp/tester/
18/10/2019 06:17:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350678.06 root@10.240.176.173:/tmp/tester/
18/10/2019 06:18:00 tester: python /tmp/tester/scapy_ens160f0.cmd1571350678.06
18/10/2019 06:18:01 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=33024)/Dot1Q(vlan=1, type=34525, id=0, prio=0)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=92, fl=0, tc=0)/UDP(dport=4789, sport=63, len=92, chksum=37306)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=33024)/Dot1Q(vlan=1, type=2048, id=0, prio=0)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=1, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:18:08 TestVxlan: chksums{'inner_tcp': '0xeefd', 'inner_ip': '0xf569'}
18/10/2019 06:18:08 dut.10.240.176.196: stop
18/10/2019 06:18:08 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
Bad-ipcsum: 0 Bad-l4csum: 1 Bad-outer-l4csum: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
Bad-ipcsum: 0 Bad-l4csum: 0 Bad-outer-l4csum: 0
TX-packets: 1 TX-dropped: 0 TX-total: 1
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:18:08 dut.10.240.176.196: quit
18/10/2019 06:18:11 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
18/10/2019 06:18:11 TestVxlan: Test Case test_vxlan_ipv6_checksum_offload Result PASSED:
18/10/2019 06:18:11 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:18:15 TestVxlan: Test Case test_vxlan_ipv6_detect Begin
18/10/2019 06:18:15 dut.10.240.176.196:
18/10/2019 06:18:15 tester:
18/10/2019 06:18:15 dut.10.240.176.196: cat config/common_base
18/10/2019 06:18:15 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
18/10/2019 06:18:15 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n/' config/common_base
18/10/2019 06:18:15 dut.10.240.176.196:
18/10/2019 06:18:15 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
18/10/2019 06:18:15 dut.10.240.176.196:
18/10/2019 06:18:15 dut.10.240.176.196: export RTE_SDK=`pwd`
18/10/2019 06:18:15 dut.10.240.176.196:
18/10/2019 06:18:15 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
18/10/2019 06:18:16 dut.10.240.176.196:
18/10/2019 06:18:16 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
18/10/2019 06:18:16 dut.10.240.176.196:
18/10/2019 06:18:16 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
18/10/2019 06:18:16 dut.10.240.176.196:
18/10/2019 06:18:16 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
18/10/2019 06:18:16 dut.10.240.176.196:
18/10/2019 06:18:16 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
18/10/2019 06:20:19 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio.o
CC eal_vfio_mp_sync.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_lcore.o
CC eal_timer.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_acl
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_meter.h
CC rte_meter.o
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_metrics.h
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_cfgfile.o
SYMLINK-FILE include/rte_pci.h
CC rte_metrics.o
CC rte_rcu_qsbr.o
SYMLINK-FILE include/rte_jobstats.h
CC rte_pci.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
CC rte_jobstats.o
SYMLINK-FILE include/rte_timer.h
CC rte_ring.o
CC rte_timer.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_stack_std.o
CC rte_stack.o
CC rte_stack_lf.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC tb_mem.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_stack.a
INSTALL-LIB librte_stack.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
== Build lib/librte_mempool
== Build lib/librte_hash
AR librte_rcu.a
AR librte_metrics.a
INSTALL-LIB librte_rcu.a
INSTALL-LIB librte_metrics.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
AR librte_net.a
INSTALL-LIB librte_net.a
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_approx.h
CC rte_sched.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/cmdline_parse_num.h
AR librte_reorder.a
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/rte_flow.h
INSTALL-LIB librte_reorder.a
SYMLINK-FILE include/cmdline_socket.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
SYMLINK-FILE include/rte_tm_driver.h
AR librte_hash.a
SYMLINK-FILE include/rte_mtr.h
SYMLINK-FILE include/rte_mtr_driver.h
CC cmdline.o
CC cmdline_cirbuf.o
CC ethdev_private.o
CC cmdline_parse.o
CC cmdline_parse_etheraddr.o
CC rte_ethdev.o
INSTALL-LIB librte_hash.a
CC rte_class_eth.o
CC cmdline_parse_ipaddr.o
CC rte_flow.o
CC rte_tm.o
CC cmdline_parse_num.o
CC rte_mtr.o
CC cmdline_parse_string.o
CC ethdev_profile.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_lpm_sse.h
CC rte_lpm.o
SYMLINK-FILE include/rte_member.h
CC rte_lpm6.o
CC rte_member.o
CC rte_member_ht.o
CC rte_member_vbf.o
SYMLINK-FILE include/rte_efd.h
CC rte_efd.o
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_latencystats
== Build lib/librte_bitratestats
== Build lib/librte_kni
== Build lib/librte_distributor
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_gso.h
CC rte_bitrate.o
CC rte_gso.o
SYMLINK-FILE include/rte_gro.h
CC gso_common.o
CC gso_tcp4.o
CC rte_gro.o
CC gro_tcp4.o
CC gso_tunnel_tcp4.o
SYMLINK-FILE include/rte_latencystats.h
CC gso_udp4.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_kni.h
SYMLINK-FILE include/rte_pdump.h
CC rte_latencystats.o
CC rte_kni.o
SYMLINK-FILE include/rte_rawdev.h
CC rte_pdump.o
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC rte_rawdev.o
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_eventdev.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_distributor.h
CC rte_security.o
CC bpf.o
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC bpf_exec.o
CC rte_distributor_v20.o
SYMLINK-FILE include/rte_ip_frag.h
CC rte_distributor.o
CC fd_man.o
CC rte_ipv4_fragmentation.o
CC iotlb.o
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
CC socket.o
CC bpf_load.o
CC rte_ipv6_fragmentation.o
CC vhost.o
CC rte_ipv4_reassembly.o
CC bpf_pkt.o
CC bpf_validate.o
CC rte_ipv6_reassembly.o
CC rte_ip_frag_common.o
CC vhost_user.o
CC bpf_jit_x86.o
CC virtio_net.o
CC ip_frag_internal.o
CC vdpa.o
SYMLINK-FILE include/rte_event_timer_adapter.h
CC vhost_crypto.o
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
SYMLINK-FILE include/rte_event_crypto_adapter.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC rte_eventdev.o
CC rte_event_ring.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC rte_event_crypto_adapter.o
CC rte_event_eth_tx_adapter.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_security.a
AR librte_gro.a
INSTALL-LIB librte_security.a
INSTALL-LIB librte_gro.a
== Build lib/librte_ipsec
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_kni.a
INSTALL-LIB librte_kni.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_gso.a
INSTALL-LIB librte_gso.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_stub.h
SYMLINK-FILE include/rte_table_array.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key32.o
CC rte_table_hash_key16.o
CC rte_table_hash_ext.o
CC rte_table_array.o
CC rte_table_hash_lru.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC otx2_dev.o
SYMLINK-FILE include/dpaax_iova_table.h
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
CC dpaax_iova_table.o
CC cpt_pmd_ops_helper.o
CC octeontx_mbox.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
== Build drivers/bus
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vdev_params.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC vmbus_common.o
CC dpaa_bus.o
CC vmbus_channel.o
SYMLINK-FILE include/rte_bus_pci.h
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC base/fman/netcfg_layer.o
CC linux/pci.o
CC linux/pci_uio.o
CC pci_params.o
CC linux/pci_vfio.o
CC pci_common.o
CC base/qbman/process.o
CC pci_common_uio.o
CC base/qbman/bman_driver.o
CC base/qbman/bman.o
CC base/qbman/qman.o
CC qbman/qbman_portal.o
CC base/qbman/qman_driver.o
CC qbman/qbman_debug.o
CC base/qbman/dpaa_alloc.o
CC mc/dpmng.o
CC mc/dpbp.o
CC mc/dpio.o
CC base/qbman/dpaa_sys.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC mc/dpci.o
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
Building modules, stage 2.
AR librte_bus_ifpga.a
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_ifpga.a
INSTALL-LIB librte_bus_vdev.a
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
MODPOST 1 modules
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
LD portal/dpaa2_hw_dpci.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD portal/dpaa2_hw_dpio.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC dpaa_mempool.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC rte_mempool_ring.o
CC dpaa2_hw_mempool.o
CC rte_mempool_bucket.o
CC rte_mempool_stack.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/compress/octeontx
CC qat_comp.o
CC qat_comp_pmd.o
CC qat_common.o
CC qat_device.o
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/af_packet
== Build drivers/net/avp
== Build drivers/net/axgbe
CC qat_logs.o
CC qat_qp.o
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/hinic
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/crypto/octeontx
== Build drivers/net/ipn3ke
== Build drivers/crypto/scheduler
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
== Build drivers/net/memif
== Build drivers/crypto/null
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/caam_jr
== Build drivers/baseband/null
== Build drivers/net/netvsc
CC ark_ddm.o
SYMLINK-FILE include/rte_eth_bond.h
CC otx_zip_pmd.o
CC axgbe_ethdev.o
CC ena_ethdev.o
CC hns3_ethdev.o
SYMLINK-FILE include/rte_avp_common.h
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC atl_rxtx.o
CC dpaa_sec.o
CC enetc_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC iavf_adminq.o
CC rte_eth_af_packet.o
CC bbdev_null.o
CC rte_eth_memif.o
CC cxgbe_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC otx_cryptodev.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC hinic_pmd_api_cmd.o
CC ipn3ke_ethdev.o
CC caam_jr.o
SYMLINK-FILE include/rte_avp_fifo.h
CC enic_ethdev.o
CC lio_ethdev.o
CC dpaa_ethdev.o
CC null_crypto_pmd.o
CC dpaa2_sec_dpseci.o
CC failsafe.o
CC base/dpaa2_hw_dpni.o
CC avp_ethdev.o
CC rte_eth_bond_api.o
CC scheduler_pmd.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC fm10k_ethdev.o
CC i40e_adminq.o
CC e1000_80003es2lan.o
SYMLINK-FILE include/rte_pmd_ice.h
CC hn_ethdev.o
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC ark_ethdev_rx.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC ark_ethdev_tx.o
CC fm10k_rxtx.o
CC e1000_82540.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
CC e1000_82541.o
LD otx_cryptodev.o
CC ark_mpu.o
CC otx_cryptodev_capabilities.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC otx_cryptodev_hw_access.o
CC dpaa2_rxtx.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC scheduler_pmd_ops.o
CC rte_cryptodev_scheduler.o
LD failsafe.o
CC hinic_pmd_cfg.o
CC failsafe_args.o
PMDINFO bbdev_null.o.pmd.c
CC bbdev_null.o.pmd.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
LD bbdev_null.o
LD axgbe_ethdev.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
== Build drivers/baseband/turbo_sw
CC axgbe_dev.o
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD null_crypto_pmd.o
LD ipn3ke_ethdev.o
PMDINFO enic_ethdev.o.pmd.c
CC enic_ethdev.o.pmd.o
CC null_crypto_pmd_ops.o
LD enic_ethdev.o
CC ipn3ke_representor.o
CC e1000_82542.o
CC enic_main.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
LD hn_ethdev.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
CC hn_rxtx.o
LD otx_zip_pmd.o
PMDINFO ark_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC otx_cryptodev_mbox.o
CC otx_zip.o
LD ark_ethdev.o
CC otx_cryptodev_ops.o
CC rte_eth_bond_pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
CC bbdev_turbo_software.o
LD dpaa_ethdev.o
CC e1000_82543.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
CC dpaa_rxtx.o
LD enetc_ethdev.o
CC enetc_rxtx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
LD lio_ethdev.o
CC lio_rxtx.o
CC enic_rxtx.o
CC hinic_pmd_cmdq.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_eqs.o
CC atl_ethdev.o
CC e1000_82571.o
CC e1000_82575.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
LD rte_eth_memif.o
CC e1000_i210.o
CC memif_socket.o
CC ixgbe_82598.o
CC failsafe_eal.o
CC ark_pktchkr.o
CC ixgbe_82599.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
CC ixgbe_x540.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC ixgbe_x550.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
CC cxgbevf_ethdev.o
CC cxgbe_main.o
CC rte_eth_bond_args.o
CC iavf_common.o
CC iavf_ethdev.o
CC axgbe_mdio.o
CC axgbe_phy_impl.o
AR librte_pmd_enetc.a
INSTALL-LIB librte_pmd_enetc.a
CC ixgbe_phy.o
CC ice_common.o
CC ice_sched.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC hinic_pmd_hwdev.o
CC hinic_pmd_hwif.o
CC i40e_common.o
CC failsafe_ops.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
LD hns3_ethdev.o
LD bbdev_turbo_software.o
CC hns3_ethdev_vf.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
== Build drivers/baseband/fpga_lte_fec
CC ipn3ke_tm.o
CC ipn3ke_flow.o
CC e1000_api.o
CC ark_pktdir.o
SYMLINK-FILE include/fpga_lte_fec.h
CC fpga_lte_fec.o
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
LD cxgbevf_ethdev.o
CC fm10k_pf.o
CC e1000_ich8lan.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC e1000_logs.o
CC e1000_mac.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
LD ena_ethdev.o
CC scheduler_roundrobin.o
CC ena_com.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
CC ixgbe_api.o
LD atl_ethdev.o
CC ice_switch.o
== Build drivers/crypto/virtio
CC atl_hw_regs.o
== Build drivers/crypto/nitrox
CC ixgbe_vf.o
CC e1000_manage.o
CC hw_atl_utils.o
CC hw_atl_llh.o
CC iavf_vchnl.o
CC virtqueue.o
CC ark_pktgen.o
CC axgbe_i2c.o
CC nitrox_device.o
CC axgbe_rxtx.o
CC ixgbe_hv_vf.o
CC dpaa2_ethdev.o
CC i40e_diag.o
CC virtio_pci.o
CC fm10k_tlv.o
CC hinic_pmd_mgmt.o
CC cxgbevf_main.o
CC lio_23xx_vf.o
CC ixgbe_dcb.o
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
LD hns3_ethdev_vf.o
CC scheduler_pkt_size_distr.o
CC ixgbe_dcb_82599.o
CC hns3_cmd.o
CC scheduler_failover.o
CC ena_eth_com.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
== Build drivers/net/nfp
CC fm10k_common.o
CC hn_rndis.o
CC enic_clsf.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD nitrox_device.o
CC nitrox_hal.o
CC nitrox_logs.o
CC fm10k_mbx.o
CC fm10k_vf.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
LD avp_ethdev.o
CC nfp_cppcore.o
CC nfp_cpp_pcie_ops.o
CC nfp_mutex.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC nfp_resource.o
PMDINFO fpga_lte_fec.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC hw_atl_utils_fw2x.o
LD fpga_lte_fec.o
CC fm10k_api.o
CC sge.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
AR librte_pmd_ena.a
CC hw_atl_b0.o
INSTALL-LIB librte_pmd_ena.a
CC fm10k_rxtx_vec.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC hinic_pmd_niccfg.o
CC nitrox_sym.o
CC hn_nvs.o
CC ixgbe_dcb_82598.o
CC ark_rqp.o
CC ark_udm.o
CC virtio_rxtx.o
CC hns3_mbx.o
CC enic_res.o
CC e1000_mbx.o
CC lio_mbox.o
CC enic_flow.o
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC base/vnic_cq.o
CC base/vnic_wq.o
CC rte_eth_bond_8023ad.o
CC rte_eth_bond_alb.o
CC scheduler_multicore.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
CC ixgbe_mbx.o
LD caam_jr.o
CC caam_jr_capabilities.o
CC e1000_nvm.o
CC caam_jr_hw.o
CC base/vnic_dev.o
CC caam_jr_uio.o
CC hn_vf.o
CC virtio_cryptodev.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
CC ixgbe_rxtx.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
LD iavf_ethdev.o
LD dpaa2_ethdev.o
CC ixgbe_ethdev.o
CC ixgbe_fdir.o
CC rte_eth_bond_flow.o
CC dpaa2_flow.o
CC hns3_rxtx.o
CC ice_nvm.o
CC iavf_rxtx.o
CC dpaa2_mux.o
CC rte_pmd_atlantic.o
CC failsafe_rxtx.o
CC e1000_osdep.o
CC e1000_phy.o
CC hns3_rss.o
CC ixgbe_pf.o
CC nfp_crc.o
CC e1000_vf.o
CC i40e_hmc.o
AR librte_pmd_lio.a
CC nitrox_sym_capabilities.o
INSTALL-LIB librte_pmd_lio.a
CC hinic_pmd_nicio.o
CC hinic_pmd_wq.o
CC axgbe_rxtx_vec_sse.o
CC nfp_mip.o
CC nfp_nffw.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
CC hinic_pmd_ethdev.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
CC failsafe_ether.o
AR librte_pmd_netvsc.a
INSTALL-LIB librte_pmd_netvsc.a
CC nfp_nsp.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD dpaa2_mux.o
CC hinic_pmd_rx.o
CC hinic_pmd_tx.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC cxgbe_filter.o
CC cxgbe_flow.o
AR librte_pmd_crypto_scheduler.a
PMDINFO dpaa_sec.o.pmd.c
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC dpaa_sec.o.pmd.o
CC hns3_flow.o
LD dpaa_sec.o
CC nitrox_sym_reqmgr.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC nitrox_qp.o
CC hns3_fdir.o
CC failsafe_flow.o
CC ice_flex_pipe.o
CC ice_flow.o
CC i40e_lan_hmc.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
CC failsafe_intr.o
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
CC nfp_nsp_cmds.o
INSTALL-LIB librte_pmd_virtio_crypto.a
CC nfp_nsp_eth.o
CC ixgbe_flow.o
CC ixgbe_rxtx_vec_sse.o
CC ixgbe_ipsec.o
CC igb_ethdev.o
CC igb_rxtx.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
CC rte_pmd_ixgbe.o
CC mc/dpseci.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC ixgbe_tm.o
CC nfp_net.o
CC dpaa2_sparser.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC mc/dpni.o
CC mc/dpkg.o
CC mc/dpdmux.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
== Build drivers/net/bnxt
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
== Build drivers/net/null
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
== Build drivers/net/qede
LD hinic_pmd_ethdev.o
== Build drivers/net/ring
== Build drivers/net/sfc
== Build drivers/net/tap
CC i40e_nvm.o
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
SYMLINK-FILE include/rte_pmd_bnxt.h
CC i40e_dcb.o
== Build drivers/net/thunderx
CC bnxt_cpr.o
CC bnxt_ethdev.o
CC rte_eth_null.o
CC octeontx_rxtx.o
CC base/vnic_intr.o
CC otx2_rx.o
CC igb_pf.o
CC hns3_intr.o
CC octeontx_pkovf.o
CC octeontx_pkivf.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC igb_flow.o
CC sfc_ethdev.o
CC ecore_dev.o
CC base/vnic_rq.o
CC sfc_kvargs.o
PMDINFO octeontx_pkivf.o.pmd.c
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkivf.o
LD octeontx_pkovf.o
CC nicvf_rxtx.o
CC otx2_tx.o
CC sfc.o
AR librte_pmd_dpaa2.a
INSTALL-LIB librte_pmd_dpaa2.a
CC otx2_tm.o
CC otx2_rss.o
CC otx2_mac.o
CC rte_eth_tap.o
CC iavf_rxtx_vec_sse.o
CC tap_flow.o
CC octeontx_bgx.o
CC octeontx_ethdev.o
CC tap_netlink.o
CC bnxt_filter.o
CC enic_rxtx_vec_avx2.o
CC bnxt_flow.o
CC bnxt_hwrm.o
CC bnxt_ring.o
CC em_ethdev.o
CC hns3_stats.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
LD rte_eth_ring.o
CC otx2_ptp.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
== Build drivers/net/vdev_netvsc
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
CC otx2_flow.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
== Build drivers/net/virtio
CC sfc_mcdi.o
CC vdev_netvsc.o
CC sfc_intr.o
CC sfc_ev.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
CC virtqueue.o
LD ixgbe_ethdev.o
CC sfc_port.o
CC ixgbe_vf_representor.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
CC ice_dcb.o
LD igb_ethdev.o
CC ice_fdir.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC ice_ethdev.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC ice_rxtx.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC otx2_link.o
== Build drivers/net/vmxnet3
CC t4_hw.o
CC clip_tbl.o
CC mps_tcam.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
== Build drivers/net/kni
LD em_ethdev.o
LD sfc_ethdev.o
AR librte_pmd_enic.a
CC em_rxtx.o
INSTALL-LIB librte_pmd_enic.a
CC bnxt_rxq.o
CC l2t.o
CC i40e_ethdev.o
CC hns3_regs.o
AR librte_pmd_hinic.a
INSTALL-LIB librte_pmd_hinic.a
CC nicvf_hw.o
== Build drivers/net/softnic
CC vmxnet3_rxtx.o
CC vmxnet3_ethdev.o
CC ice_rxtx_vec_sse.o
CC ice_switch_filter.o
CC rte_eth_kni.o
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
LD rte_eth_null.o
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_null.a
CC ice_rxtx_vec_avx2.o
== Build drivers/net/vhost
CC ice_generic_flow.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
CC nicvf_mbox.o
LD bnxt_ethdev.o
CC i40e_rxtx.o
SYMLINK-FILE include/rte_eth_softnic.h
CC sfc_rx.o
CC rte_eth_softnic.o
PMDINFO vdev_netvsc.o.pmd.c
CC vdev_netvsc.o.pmd.o
LD vdev_netvsc.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
CC otx2_vlan.o
SYMLINK-FILE include/rte_eth_vhost.h
CC rte_eth_vhost.o
CC sfc_tx.o
AR librte_pmd_ixgbe.a
== Build drivers/net/ifc
INSTALL-LIB librte_pmd_ixgbe.a
CC i40e_ethdev_vf.o
CC i40e_pf.o
CC t4vf_hw.o
CC virtio_pci.o
CC hns3_dcb.o
CC hns3_mp.o
CC ifcvf_vdpa.o
CC nicvf_ethdev.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
LD rte_eth_kni.o
AR librte_pmd_iavf.a
INSTALL-LIB librte_pmd_iavf.a
CC nicvf_bsvf.o
AR librte_pmd_octeontx_crypto.a
AR librte_pmd_kni.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_kni.a
CC nicvf_svf.o
CC i40e_fdir.o
CC i40e_flow.o
CC rte_pmd_i40e.o
CC bnxt_rxr.o
CC bnxt_stats.o
CC rte_eth_softnic_link.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC bnxt_txq.o
LD vmxnet3_ethdev.o
CC rte_eth_softnic_tm.o
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
CC rte_eth_softnic_pipeline.o
CC rte_eth_softnic_thread.o
CC virtio_rxtx.o
CC virtio_ethdev.o
CC virtio_rxtx_simple.o
CC virtio_rxtx_simple_sse.o
CC virtio_user/vhost_user.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC virtio_user/vhost_kernel.o
CC virtio_user/vhost_kernel_tap.o
CC virtio_user/virtio_user_dev.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD ifcvf_vdpa.o
CC otx2_stats.o
LD nicvf_ethdev.o
CC rte_eth_softnic_cli.o
CC ifcvf.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC rte_eth_softnic_flow.o
CC otx2_lookup.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
CC otx2_ethdev.o
LD rte_eth_vhost.o
AR librte_pmd_vhost.a
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
INSTALL-LIB librte_pmd_vhost.a
CC otx2_flow_ctrl.o
LD rte_eth_tap.o
CC bnxt_txr.o
CC tap_tcmsgs.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC tap_bpf_api.o
CC virtio_user_ethdev.o
CC sfc_tso.o
CC tap_intr.o
CC rte_eth_softnic_meter.o
PMDINFO i40e_ethdev_vf.o.pmd.c
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
CC i40e_tm.o
CC ecore_hw.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
CC ecore_cxt.o
CC ecore_l2.o
CC i40e_vf_representor.o
CC rte_eth_softnic_cryptodev.o
CC ecore_sp_commands.o
CC parser.o
CC conn.o
CC ecore_init_fw_funcs.o
CC ecore_spq.o
CC sfc_filter.o
CC otx2_flow_parse.o
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
AR librte_pmd_tap.a
CC sfc_flow.o
INSTALL-LIB librte_pmd_tap.a
CC sfc_dp.o
CC sfc_ef10_rx.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC otx2_ethdev_ops.o
LD ice_ethdev.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC otx2_ethdev_debug.o
CC otx2_ethdev_devargs.o
LD virtio_user_ethdev.o
CC ecore_init_ops.o
CC ecore_mcp.o
CC bnxt_vnic.o
CC bnxt_irq.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
AR librte_pmd_vmxnet3_uio.a
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC bnxt_rxtx_vec_sse.o
CC ecore_int.o
CC ecore_dcbx.o
CC bcm_osal.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
CC efx_crc32.o
CC ecore_sriov.o
CC ecore_vf.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
LD virtio_ethdev.o
CC qede_ethdev.o
CC efx_ev.o
CC efx_evb.o
AR librte_pmd_ice.a
CC efx_filter.o
INSTALL-LIB librte_pmd_ice.a
CC efx_hash.o
CC qede_main.o
CC qede_rxtx.o
CC qede_filter.o
CC efx_intr.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
CC efx_mon.o
CC efx_nic.o
CC efx_nvram.o
CC efx_phy.o
CC efx_port.o
CC efx_proxy.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC efx_vpd.o
CC mcdi_mon.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
AR librte_pmd_octeontx2.a
CC siena_vpd.o
INSTALL-LIB librte_pmd_octeontx2.a
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
CC ef10_rx.o
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
CC medford_nic.o
CC medford2_nic.o
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/octeontx2
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/dpaa
== Build drivers/event/dpaa2
== Build drivers/event/opdl
CC dpaa_eventdev.o
CC skeleton_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC dsw_evdev.o
CC dsw_event.o
CC otx2_worker_dual.o
CC dsw_xstats.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC otx2_tim_evdev.o
CC otx2_evdev_selftest.o
CC opdl_evdev_xstats.o
CC opdl_test.o
CC otx2_evdev_irq.o
CC sw_evdev.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD sw_evdev.o
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
PMDINFO dpaa_eventdev.o.pmd.c
LD dpaa2_eventdev.o
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ioat
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC ntb.o
CC ntb_hw_intel.o
CC dpaa2_cmdif.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
LD ntb.o
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
LD dpaa2_qdma.o
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/pdump
== Build app/test-cmdline
== Build app/test-pipeline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC cmdline_test.o
CC commands.o
CC comp_perf_test_verify.o
CC main.o
CC main.o
CC test_bbdev.o
CC config.o
CC comp_perf_test_benchmark.o
CC init.o
CC comp_perf_test_common.o
CC main.o
CC cperf_ops.o
CC cperf_options_parsing.o
CC runtime.o
CC pipeline_stub.o
CC main.o
CC test_bbdev_perf.o
CC cperf_test_vectors.o
CC pipeline_hash.o
CC test_bbdev_vector.o
CC pipeline_lpm.o
CC cperf_test_throughput.o
CC evt_main.o
CC pipeline_lpm_ipv6.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
CC pipeline_acl.o
CC cperf_test_verify.o
CC evt_options.o
CC cperf_test_vector_parsing.o
CC evt_test.o
CC testpmd.o
CC cperf_test_common.o
CC parameters.o
LD cmdline_test
CC parser.o
CC commands.o
CC test.o
CC test_order_common.o
CC test_order_queue.o
CC test_order_atq.o
LD testacl
CC test_perf_common.o
CC test_perf_queue.o
CC test_perf_atq.o
CC resource.o
CC test_resource.o
CC test_pipeline_common.o
CC cmdline.o
CC test_prefetch.o
LD dpdk-procinfo
CC test_pipeline_queue.o
CC test_pipeline_atq.o
CC test_byteorder.o
CC test_per_lcore.o
CC test_atomic.o
CC cmdline_flow.o
CC test_barrier.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC config.o
CC iofwd.o
CC test_malloc.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC test_cycles.o
CC test_mcslock.o
CC test_spinlock.o
CC test_ticketlock.o
LD testpipeline
CC test_memory.o
LD dpdk-pdump
CC macfwd.o
CC macswap.o
CC flowgen.o
CC test_memzone.o
CC test_bitmap.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC rxonly.o
CC txonly.o
CC csumonly.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC icmpecho.o
CC test_fbarray.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_external_mem.o
CC noisy_vnf.o
CC bpf_cmd.o
CC util.o
INSTALL-APP testpipeline
INSTALL-MAP testpipeline.map
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC softnicfwd.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
CC test_table_acl.o
INSTALL-APP dpdk-pdump
INSTALL-MAP dpdk-pdump.map
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
CC test_stack_perf.o
CC test_timer.o
LD dpdk-test-eventdev
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
CC test_hash_readwrite_lf.o
CC test_lpm.o
CC test_lpm_perf.o
CC test_lpm6.o
CC test_lpm6_perf.o
INSTALL-APP dpdk-test-eventdev
CC test_debug.o
LD dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-eventdev.map
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
INSTALL-APP dpdk-test-crypto-perf
CC test_link_bonding_mode4.o
INSTALL-MAP dpdk-test-crypto-perf.map
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
LD testpmd
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
18/10/2019 06:20:19 dut.10.240.176.196: ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=4 --portmask=0x3
18/10/2019 06:20:31 dut.10.240.176.196: EAL: Detected 40 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 1024 hugepages of size 2097152 reserved, but no mounted hugetlbfs found for that size
EAL: Probing VFIO support...
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.2 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:02:00.3 on NUMA socket 0
EAL: probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL: probe driver: 8086:1572 net_i40e
EAL: PCI device 0000:08:00.0 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL: probe driver: 8086:10fb net_ixgbe
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=179456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 68:05:CA:BB:BB:A1
Configuring Port 1 (socket 0)
Port 1: 68:05:CA:BB:BB:A2
Checking link statuses...
Done
18/10/2019 06:20:31 dut.10.240.176.196: set fwd rxonly
18/10/2019 06:20:31 dut.10.240.176.196: set fwd rxonly
Set rxonly packet forwarding mode
18/10/2019 06:20:31 dut.10.240.176.196: set verbose 1
18/10/2019 06:20:31 dut.10.240.176.196: set verbose 1
Change verbose level from 0 to 1
18/10/2019 06:20:31 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:20:31 dut.10.240.176.196: rx_vxlan_port add 4789 0
18/10/2019 06:20:36 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:20:36 dut.10.240.176.196: rx_vxlan_port add 4789 1
18/10/2019 06:20:41 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_udp_dst = 1234][outer_ip6_src = FE80:0:0:0:0:0:0:0]
18/10/2019 06:20:41 dut.10.240.176.196: start
18/10/2019 06:20:41 dut.10.240.176.196: start
rxonly packet forwarding - ports=2 - cores=4 - streams=8 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
Logical Core 3 (socket 0) forwards packets on 2 streams:
RX P=0/Q=1 (socket 0) -> TX P=1/Q=1 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
Logical Core 4 (socket 0) forwards packets on 2 streams:
RX P=0/Q=2 (socket 0) -> TX P=1/Q=2 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=2 (socket 0) -> TX P=0/Q=2 (socket 0) peer=02:00:00:00:00:00
Logical Core 5 (socket 0) forwards packets on 2 streams:
RX P=0/Q=3 (socket 0) -> TX P=1/Q=3 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=3 (socket 0) -> TX P=0/Q=3 (socket 0) peer=02:00:00:00:00:00
rxonly packet forwarding packets/burst=32
nb forwarding cores=4 - nb forwarding ports=2
port 0: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 4 Tx queue number: 4
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
18/10/2019 06:20:41 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350841.88 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:43 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350841.88 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:44 tester: python /tmp/tester/scapy_ens160f0.cmd1571350841.88
18/10/2019 06:20:45 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=26, fl=0, tc=0)/UDP(dport=1234, sport=63, len=26, chksum=57995)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:20:47 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=80 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:20:47 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = UDP]
18/10/2019 06:20:47 dut.10.240.176.196: start
18/10/2019 06:20:47 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:20:47 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350847.47 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:48 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350847.47 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:50 tester: python /tmp/tester/scapy_ens160f0.cmd1571350847.47
18/10/2019 06:20:50 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=76, fl=0, tc=0)/UDP(dport=4789, sport=63, len=76, chksum=9182)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=17, tos=0, dst='192.168.2.2', chksum=62826, len=46, id=1, version=4, flags=0, ihl=5, ttl=64)/UDP(dport=53, sport=53, len=26, chksum=24289)/DNS(aa=0, qr=0, an='', ad=0, nscount=22616, qdcount=22616, ns='', tc=0, rd=0, arcount=22616, length=None, ar='', opcode=11, ra=0, cd=1, z=1, rcode=8, id=22616, ancount=22616, qd='')/Raw(load='XXXXXX')
.
Sent 1 packets.
18/10/2019 06:20:52 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=130 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_UDP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:20:52 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = TCP]
18/10/2019 06:20:52 dut.10.240.176.196: start
18/10/2019 06:20:53 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:20:53 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350853.06 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:54 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350853.06 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:55 tester: python /tmp/tester/scapy_ens160f0.cmd1571350853.06
18/10/2019 06:20:56 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=88, fl=0, tc=0)/UDP(dport=4789, sport=63, len=88, chksum=9159)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=6, tos=0, dst='192.168.2.2', chksum=62825, len=58, id=1, version=4, flags=0, ihl=5, ttl=64)/TCP(reserved=0, seq=0, ack=0, dataofs=5, urgptr=0, window=8192, flags=2, chksum=61181, dport=80, sport=20)/Raw(load='XXXXXXXXXXXXXXXXXX')
.
Sent 1 packets.
18/10/2019 06:20:58 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_TCP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:20:58 TestVxlan: send vxlan pkts [outer_ip6_dst = FE80:0:0:0:0:0:0:1][outer_ip6_src = FE80:0:0:0:0:0:0:0][inner_l4_type = SCTP]
18/10/2019 06:20:58 dut.10.240.176.196: start
18/10/2019 06:20:58 dut.10.240.176.196: start
Packet forwarding already started
18/10/2019 06:20:58 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.pcap1571350858.63 root@10.240.176.173:/tmp/tester/
18/10/2019 06:20:59 tester: scp -v /home/autoregression/zhushaui/output/tmp/pcap/scapy_ens160f0.cmd1571350858.63 root@10.240.176.173:/tmp/tester/
18/10/2019 06:21:01 tester: python /tmp/tester/scapy_ens160f0.cmd1571350858.63
18/10/2019 06:21:02 tester: packet ready for sending...
Ether(src='00:00:10:00:00:00', dst='68:05:ca:bb:bb:a1', type=34525)/IPv6(nh=17, src='fe80::', dst='fe80::1', version=6, hlim=64, plen=94, fl=0, tc=0)/UDP(dport=4789, sport=63, len=94, chksum=38949)/VXLAN(vni=1, gpid=None, flags=8, gpflags=None, reserved2=0, reserved1=0, reserved0=None, NextProtocol=None)/Ether(src='00:00:20:00:00:00', dst='00:00:20:00:00:01', type=2048)/IP(frag=0, src='192.168.2.1', proto=132, tos=0, dst='192.168.2.2', chksum=62693, len=64, id=1, version=4, flags=0, ihl=5, ttl=64)/SCTP(dport=0, sport=0, tag=0, chksum=1945161537)/SCTPChunkData(delay_sack=0, tsn=0, reserved=0, type=0, proto_id=0, len=32, ending=0, stream_id=0, data='XXXXXXXXXXXXXXXX', stream_seq=0, beginning=0, unordered=0)
.
Sent 1 packets.
18/10/2019 06:21:04 dut.10.240.176.196: port 0/queue 0: received 1 packets
src=00:00:10:00:00:00 - dst=68:05:CA:BB:BB:A1 - type=0x86dd - length=148 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN TUNNEL_GRENAT INNER_L2_ETHER INNER_L3_IPV4_EXT_UNKNOWN INNER_L4_SCTP - sw ptype: L2_ETHER L3_IPV6 L4_UDP - l2_len=14 - l3_len=40 - l4_len=8 - VXLAN packet: packet type =24801, Destination UDP port =4789, VNI = 1 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
18/10/2019 06:21:04 dut.10.240.176.196: stop
18/10/2019 06:21:04 dut.10.240.176.196: stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
RX-packets: 4 TX-packets: 0 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 4 RX-dropped: 0 RX-total: 4
TX-packets: 0 TX-dropped: 0 TX-total: 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
18/10/2019 06:21:04 dut.10.240.176.196: quit
18/10/2019 06:21:07 dut.10.240.176.196: quit
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Port 0: link state change event
Done
Shutting down port 0...
Closing ports...
Port 1: link state change event
Done
Shutting down port 1...
Closing ports...
Done
Bye...
18/10/2019 06:21:07 dut.10.240.176.196: cat config/common_base
18/10/2019 06:21:07 dut.10.240.176.196: # SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
#
# String that appears before the version number
#
CONFIG_RTE_VER_PREFIX="DPDK"
#
# Version information completed when this file is processed for a build
#
CONFIG_RTE_VER_YEAR=__YEAR
CONFIG_RTE_VER_MONTH=__MONTH
CONFIG_RTE_VER_MINOR=__MINOR
CONFIG_RTE_VER_SUFFIX=__SUFFIX
CONFIG_RTE_VER_RELEASE=__RELEASE
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Major ABI to overwrite library specific LIBABIVER
#
CONFIG_RTE_MAJOR_ABI=
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Memory model
#
CONFIG_RTE_USE_C11_MEM_MODEL=n
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_HEAPS=32
CONFIG_RTE_MAX_MEMSEG_LISTS=64
# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
# a "type" is a combination of page size and NUMA node. total number of memseg
# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
# global maximum usable amount of VA, in megabytes
CONFIG_RTE_MAX_MEM_MB=524288
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MAX_VFIO_CONTAINERS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
CONFIG_RTE_USE_LIBBSD=n
#
# Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
# AVX512 is marked as experimental for now, will enable it after enough
# field test and possible optimization.
#
CONFIG_RTE_ENABLE_AVX=y
CONFIG_RTE_ENABLE_AVX512=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the PCI library
#
CONFIG_RTE_LIBRTE_PCI=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
#
# Turn off Tx preparation stage
#
# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
# driver which do not implement any Tx preparation.
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
#
# Common libraries, before Bus/PMDs
#
CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
#
# Compile the Intel FPGA bus
#
CONFIG_RTE_LIBRTE_IFPGA_BUS=y
#
# Compile PCI bus driver
#
CONFIG_RTE_LIBRTE_PCI_BUS=y
#
# Compile the vdev bus
#
CONFIG_RTE_LIBRTE_VDEV_BUS=y
#
# Compile ARK PMD
#
CONFIG_RTE_LIBRTE_ARK_PMD=y
CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
#
# Compile Aquantia Atlantic PMD driver
#
CONFIG_RTE_LIBRTE_ATLANTIC_PMD=y
#
# Compile AMD PMD
#
CONFIG_RTE_LIBRTE_AXGBE_PMD=y
CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
# NXP DPAA Bus
CONFIG_RTE_LIBRTE_DPAA_BUS=n
CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA_PMD=n
CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
#
# Compile NXP DPAA2 FSL-MC Bus
#
CONFIG_RTE_LIBRTE_FSLMC_BUS=n
#
# Compile Support Libraries for NXP DPAA2
#
CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
#
# Compile burst-oriented NXP DPAA2 PMD driver
#
CONFIG_RTE_LIBRTE_DPAA2_PMD=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
#
# Compile NXP ENETC PMD Driver
#
CONFIG_RTE_LIBRTE_ENETC_PMD=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented HINIC PMD driver
#
CONFIG_RTE_LIBRTE_HINIC_PMD=n
#
# Compile burst-oriented HNS3 PMD driver
#
CONFIG_RTE_LIBRTE_HNS3_PMD=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented ICE PMD driver
#
CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
#
CONFIG_RTE_LIBRTE_IAVF_PMD=y
CONFIG_RTE_LIBRTE_IAVF_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC=n
CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
#
# Compile burst-oriented IPN3KE PMD driver
#
CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
#
# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5,
# ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
# Linking method for mlx4/5 dependency on ibverbs and related libraries
# Default linking is dynamic by linker.
# Other options are: dynamic by dlopen at run-time, or statically embedded.
CONFIG_RTE_IBVERBS_LINK_DLOPEN=n
CONFIG_RTE_IBVERBS_LINK_STATIC=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
# QLogic 10G/25G/40G/50G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=y
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
#
CONFIG_RTE_LIBRTE_SFC_EFX_PMD=y
CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Compile software PMD backed by NFB device
#
CONFIG_RTE_LIBRTE_NFB_PMD=n
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
# Compile burst-oriented Marvell OCTEON TX2 network PMD driver
#
CONFIG_RTE_LIBRTE_OCTEONTX2_PMD=y
#
# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
CONFIG_RTE_LIBRTE_AVP_PMD=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile software PMD backed by AF_XDP sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_XDP=n
#
# Compile Memory Interface PMD driver (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_MEMIF=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
#
# Compile fail-safe PMD
#
CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
# Compile Marvell PMD driver
#
CONFIG_RTE_LIBRTE_MVPP2_PMD=n
#
# Compile Marvell MVNETA PMD driver
#
CONFIG_RTE_LIBRTE_MVNETA_PMD=n
#
# Compile support for VMBus library
#
CONFIG_RTE_LIBRTE_VMBUS=n
#
# Compile native PMD for Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_NETVSC_PMD=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
#
# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile SOFTNIC PMD
#
CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
#
# Compile the TAP PMD
# It is enabled by default for Linux only.
#
CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic wireless base band device library
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_BBDEV=y
CONFIG_RTE_LIBRTE_BBDEV_DEBUG=n
CONFIG_RTE_BBDEV_MAX_DEVS=128
CONFIG_RTE_BBDEV_OFFLOAD_COST=y
CONFIG_RTE_BBDEV_SDK_AVX2=n
CONFIG_RTE_BBDEV_SDK_AVX512=n
#
# Compile PMD for NULL bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
#
# Compile PMD for turbo software bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y
#
# Compile PMD for Intel FPGA LTE FEC bbdev device
#
CONFIG_RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_CRYPTO_MAX_DEVS=64
#
# Compile PMD for ARMv8 Crypto device
#
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
#
# Compile NXP CAAM JR crypto Driver
#
CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
#
# Compile NXP DPAA2 crypto sec driver for CAAM HW
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
#
# NXP DPAA caam - crypto driver
#
CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
#
# Compile PMD for Cavium OCTEON TX crypto device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
#
# Compile PMD for QuickAssist based devices - see docs for details
#
CONFIG_RTE_LIBRTE_PMD_QAT=y
CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
CONFIG_RTE_LIBRTE_PMD_QAT_ASYM=n
#
# Max. number of QuickAssist devices, which can be detected and attached
#
CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
#
# Compile PMD for virtio crypto devices
#
CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
#
# Number of maximum virtio crypto devices
#
CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
# Compile PMD for Crypto Scheduler device
#
CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile PMD for AMD CCP crypto device
#
CONFIG_RTE_LIBRTE_PMD_CCP=n
#
# Compile PMD for Marvell Crypto device
#
CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
# Compile PMD for NITROX crypto device
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
#
# Compile generic security library
#
CONFIG_RTE_LIBRTE_SECURITY=y
#
# Compile generic compression device library
#
CONFIG_RTE_LIBRTE_COMPRESSDEV=y
CONFIG_RTE_COMPRESS_MAX_DEVS=64
#
# Compile compressdev unit test
#
CONFIG_RTE_COMPRESSDEV_TEST=n
#
# Compile PMD for Octeontx ZIPVF compression device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
#
# Compile PMD for ISA-L compression device
#
CONFIG_RTE_LIBRTE_PMD_ISAL=n
#
# Compile PMD for ZLIB compression device
#
CONFIG_RTE_LIBRTE_PMD_ZLIB=n
#
# Compile generic event device library
#
CONFIG_RTE_LIBRTE_EVENTDEV=y
CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
CONFIG_RTE_EVENT_MAX_DEVS=16
CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
#
# Compile PMD for skeleton event device
#
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=y
CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
#
# Compile PMD for distributed software event device
#
CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=y
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
#
# Compile PMD for octeontx2 sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EVENTDEV=y
#
# Compile PMD for OPDL event device
#
CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
#
# Compile PMD for NXP DPAA event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
#
# Compile PMD for NXP DPAA2 event device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
#
# Compile raw device support
# EXPERIMENTAL: API may change without prior notice
#
CONFIG_RTE_LIBRTE_RAWDEV=y
CONFIG_RTE_RAWDEV_MAX_DEVS=64
CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile PMD for NXP DPAA2 CMDIF raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
#
# Compile PMD for NXP DPAA2 QDMA raw device
#
CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
#
# Compile PMD for Intel FPGA raw device
#
CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
#
# Compile PMD for Intel IOAT raw device
#
CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV=y
#
# Compile PMD for octeontx2 DMA raw device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV=y
#
# Compile PMD for NTB raw device
#
CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
#
# Compile librte_stack
#
CONFIG_RTE_LIBRTE_STACK=y
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile Mempool drivers
#
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
#
# Compile PMD for octeontx fpa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
#
# Compile PMD for octeontx2 npa mempool device
#
CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL=y
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_efd
#
CONFIG_RTE_LIBRTE_EFD=y
#
# Compile librte_member
#
CONFIG_RTE_LIBRTE_MEMBER=y
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile the device metrics library
#
CONFIG_RTE_LIBRTE_METRICS=y
#
# Compile the bitrate statistics library
#
CONFIG_RTE_LIBRTE_BITRATE=y
#
# Compile the latency statistics library
#
CONFIG_RTE_LIBRTE_LATENCY_STATS=y
#
# Compile librte_telemetry
#
CONFIG_RTE_LIBRTE_TELEMETRY=n
#
# Compile librte_rcu
#
CONFIG_RTE_LIBRTE_RCU=y
CONFIG_RTE_LIBRTE_RCU_DEBUG=n
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile GRO library
#
CONFIG_RTE_LIBRTE_GRO=y
#
# Compile GSO library
#
CONFIG_RTE_LIBRTE_GSO=y
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_classify
#
CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_LIBRTE_PMD_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
# Compile IFC driver
# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
# should be enabled.
#
CONFIG_RTE_LIBRTE_IFC_PMD=n
#
# Compile librte_bpf
#
CONFIG_RTE_LIBRTE_BPF=y
# allow load BPF from ELF files (requires libelf)
CONFIG_RTE_LIBRTE_BPF_ELF=n
#
# Compile librte_ipsec
#
CONFIG_RTE_LIBRTE_IPSEC=y
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the procinfo application
#
CONFIG_RTE_PROC_INFO=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
#
# Compile the bbdev test application
#
CONFIG_RTE_TEST_BBDEV=y
#
# Compile the compression performance application
#
CONFIG_RTE_APP_COMPRESS_PERF=y
#
# Compile the crypto performance application
#
CONFIG_RTE_APP_CRYPTO_PERF=y
#
# Compile the eventdev application
#
CONFIG_RTE_APP_EVENTDEV=y
18/10/2019 06:21:07 dut.10.240.176.196: sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=.*$/CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y/' config/common_base
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: export RTE_TARGET=x86_64-native-linuxapp-gcc
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: export RTE_SDK=`pwd`
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: rm -rf x86_64-native-linuxapp-gcc
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: rm -rf ./app/test/test_resource_c.res.o
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: rm -rf ./app/test/test_resource_tar.res.o
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: rm -rf ./app/test/test_pci_sysfs.res.o
18/10/2019 06:21:08 dut.10.240.176.196:
18/10/2019 06:21:08 dut.10.240.176.196: make -j 38 install T=x86_64-native-linuxapp-gcc
18/10/2019 06:23:12 dut.10.240.176.196: Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
SYMLINK-FILE include/rte_kvargs.h
CC rte_kvargs.o
AR librte_kvargs.a
INSTALL-LIB librte_kvargs.a
== Build lib/librte_eal
== Build lib/librte_eal/common
SYMLINK-FILE include/rte_branch_prediction.h
SYMLINK-FILE include/rte_common.h
SYMLINK-FILE include/rte_compat.h
SYMLINK-FILE include/rte_debug.h
SYMLINK-FILE include/rte_eal.h
SYMLINK-FILE include/rte_eal_interrupts.h
SYMLINK-FILE include/rte_errno.h
SYMLINK-FILE include/rte_launch.h
SYMLINK-FILE include/rte_lcore.h
SYMLINK-FILE include/rte_log.h
SYMLINK-FILE include/rte_memory.h
SYMLINK-FILE include/rte_per_lcore.h
SYMLINK-FILE include/rte_memzone.h
SYMLINK-FILE include/rte_random.h
SYMLINK-FILE include/rte_interrupts.h
SYMLINK-FILE include/rte_tailq.h
SYMLINK-FILE include/rte_string_fns.h
SYMLINK-FILE include/rte_alarm.h
SYMLINK-FILE include/rte_version.h
SYMLINK-FILE include/rte_eal_memconfig.h
SYMLINK-FILE include/rte_malloc_heap.h
SYMLINK-FILE include/rte_hexdump.h
SYMLINK-FILE include/rte_devargs.h
SYMLINK-FILE include/rte_bus.h
SYMLINK-FILE include/rte_dev.h
SYMLINK-FILE include/rte_class.h
SYMLINK-FILE include/rte_option.h
SYMLINK-FILE include/rte_pci_dev_features.h
SYMLINK-FILE include/rte_pci_dev_feature_defs.h
SYMLINK-FILE include/rte_malloc.h
SYMLINK-FILE include/rte_keepalive.h
SYMLINK-FILE include/rte_time.h
SYMLINK-FILE include/rte_service.h
SYMLINK-FILE include/rte_service_component.h
SYMLINK-FILE include/rte_bitmap.h
SYMLINK-FILE include/rte_vfio.h
SYMLINK-FILE include/rte_hypervisor.h
SYMLINK-FILE include/rte_test.h
SYMLINK-FILE include/rte_reciprocal.h
SYMLINK-FILE include/rte_fbarray.h
SYMLINK-FILE include/rte_uuid.h
SYMLINK-FILE include/rte_atomic.h
SYMLINK-FILE include/rte_atomic_32.h
SYMLINK-FILE include/rte_atomic_64.h
SYMLINK-FILE include/rte_byteorder.h
SYMLINK-FILE include/rte_byteorder_32.h
SYMLINK-FILE include/rte_byteorder_64.h
SYMLINK-FILE include/rte_cpuflags.h
SYMLINK-FILE include/rte_cycles.h
SYMLINK-FILE include/rte_io.h
SYMLINK-FILE include/rte_mcslock.h
SYMLINK-FILE include/rte_memcpy.h
SYMLINK-FILE include/rte_pause.h
SYMLINK-FILE include/rte_prefetch.h
SYMLINK-FILE include/rte_rtm.h
SYMLINK-FILE include/rte_rwlock.h
SYMLINK-FILE include/rte_spinlock.h
SYMLINK-FILE include/rte_ticketlock.h
SYMLINK-FILE include/rte_vect.h
SYMLINK-FILE include/generic/rte_atomic.h
SYMLINK-FILE include/generic/rte_byteorder.h
SYMLINK-FILE include/generic/rte_cycles.h
SYMLINK-FILE include/generic/rte_prefetch.h
SYMLINK-FILE include/generic/rte_memcpy.h
SYMLINK-FILE include/generic/rte_cpuflags.h
SYMLINK-FILE include/generic/rte_mcslock.h
SYMLINK-FILE include/generic/rte_spinlock.h
SYMLINK-FILE include/generic/rte_rwlock.h
SYMLINK-FILE include/generic/rte_ticketlock.h
SYMLINK-FILE include/generic/rte_vect.h
SYMLINK-FILE include/generic/rte_pause.h
SYMLINK-FILE include/generic/rte_io.h
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
SYMLINK-FILE include/rte_kni_common.h
SYMLINK-FILE include/rte_os.h
CC eal.o
CC eal_cpuflags.o
CC eal_hugepage_info.o
CC eal_memory.o
CC eal_thread.o
CC eal_log.o
CC eal_vfio_mp_sync.o
CC eal_vfio.o
CC eal_memalloc.o
CC eal_debug.o
CC eal_timer.o
CC eal_lcore.o
CC eal_interrupts.o
CC eal_alarm.o
CC eal_dev.o
CC eal_common_lcore.o
CC eal_common_timer.o
CC eal_common_memzone.o
CC eal_common_log.o
CC eal_common_launch.o
CC eal_common_mcfg.o
CC eal_common_memalloc.o
CC eal_common_memory.o
CC eal_common_tailqs.o
CC eal_common_errno.o
CC eal_common_cpuflags.o
CC eal_common_hypervisor.o
CC eal_common_string_fns.o
CC eal_common_hexdump.o
CC eal_common_devargs.o
CC eal_common_class.o
CC eal_common_bus.o
CC eal_common_dev.o
CC eal_common_options.o
CC eal_common_thread.o
CC eal_common_proc.o
CC eal_common_fbarray.o
CC eal_common_uuid.o
CC rte_malloc.o
CC hotplug_mp.o
CC malloc_elem.o
CC malloc_heap.o
CC malloc_mp.o
CC rte_keepalive.o
CC rte_option.o
CC rte_service.o
CC rte_random.o
CC rte_reciprocal.o
CC rte_cpuflags.o
CC rte_hypervisor.o
CC rte_spinlock.o
CC rte_cycles.o
AR librte_eal.a
INSTALL-LIB librte_eal.a
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_meter
== Build lib/librte_jobstats
== Build lib/librte_acl
== Build lib/librte_metrics
== Build lib/librte_rcu
SYMLINK-FILE include/rte_pci.h
CC rte_pci.o
SYMLINK-FILE include/rte_ring.h
SYMLINK-FILE include/rte_ring_generic.h
SYMLINK-FILE include/rte_ring_c11_mem.h
SYMLINK-FILE include/rte_rcu_qsbr.h
CC rte_rcu_qsbr.o
CC rte_ring.o
SYMLINK-FILE include/rte_metrics.h
CC rte_metrics.o
SYMLINK-FILE include/rte_stack.h
SYMLINK-FILE include/rte_stack_std.h
SYMLINK-FILE include/rte_cfgfile.h
SYMLINK-FILE include/rte_stack_lf.h
SYMLINK-FILE include/rte_meter.h
SYMLINK-FILE include/rte_stack_lf_generic.h
SYMLINK-FILE include/rte_jobstats.h
CC rte_cfgfile.o
SYMLINK-FILE include/rte_stack_lf_c11.h
CC rte_meter.o
SYMLINK-FILE include/rte_timer.h
CC rte_jobstats.o
CC rte_stack.o
CC rte_timer.o
SYMLINK-FILE include/rte_acl_osdep.h
SYMLINK-FILE include/rte_acl.h
CC rte_stack_std.o
CC tb_mem.o
CC rte_stack_lf.o
CC rte_acl.o
CC acl_bld.o
CC acl_gen.o
CC acl_run_scalar.o
CC acl_run_sse.o
CC acl_run_avx2.o
AR librte_pci.a
INSTALL-LIB librte_pci.a
AR librte_meter.a
INSTALL-LIB librte_meter.a
AR librte_ring.a
INSTALL-LIB librte_ring.a
AR librte_stack.a
== Build lib/librte_mempool
== Build lib/librte_hash
INSTALL-LIB librte_stack.a
AR librte_metrics.a
INSTALL-LIB librte_metrics.a
AR librte_rcu.a
INSTALL-LIB librte_rcu.a
AR librte_cfgfile.a
INSTALL-LIB librte_cfgfile.a
SYMLINK-FILE include/rte_mempool.h
CC rte_mempool.o
CC rte_mempool_ops.o
CC rte_mempool_ops_default.o
SYMLINK-FILE include/rte_hash.h
SYMLINK-FILE include/rte_hash_crc.h
SYMLINK-FILE include/rte_jhash.h
SYMLINK-FILE include/rte_thash.h
SYMLINK-FILE include/rte_fbk_hash.h
CC rte_cuckoo_hash.o
CC rte_fbk_hash.o
AR librte_jobstats.a
INSTALL-LIB librte_jobstats.a
AR librte_timer.a
INSTALL-LIB librte_timer.a
== Build lib/librte_power
SYMLINK-FILE include/rte_power.h
SYMLINK-FILE include/rte_power_empty_poll.h
CC rte_power.o
CC power_acpi_cpufreq.o
CC power_kvm_vm.o
CC guest_channel.o
CC rte_power_empty_poll.o
CC power_pstate_cpufreq.o
AR librte_mempool.a
INSTALL-LIB librte_mempool.a
== Build lib/librte_mbuf
SYMLINK-FILE include/rte_mbuf.h
SYMLINK-FILE include/rte_mbuf_ptype.h
SYMLINK-FILE include/rte_mbuf_pool_ops.h
CC rte_mbuf.o
CC rte_mbuf_ptype.o
CC rte_mbuf_pool_ops.o
AR librte_power.a
INSTALL-LIB librte_power.a
AR librte_acl.a
INSTALL-LIB librte_acl.a
AR librte_mbuf.a
INSTALL-LIB librte_mbuf.a
== Build lib/librte_net
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_compressdev
== Build lib/librte_reorder
SYMLINK-FILE include/rte_comp.h
SYMLINK-FILE include/rte_compressdev.h
SYMLINK-FILE include/rte_compressdev_pmd.h
SYMLINK-FILE include/rte_compressdev_internal.h
CC rte_compressdev.o
CC rte_compressdev_pmd.o
CC rte_comp.o
SYMLINK-FILE include/rte_reorder.h
CC rte_reorder.o
SYMLINK-FILE include/rte_ip.h
SYMLINK-FILE include/rte_tcp.h
SYMLINK-FILE include/rte_udp.h
SYMLINK-FILE include/rte_esp.h
SYMLINK-FILE include/rte_sctp.h
SYMLINK-FILE include/rte_icmp.h
SYMLINK-FILE include/rte_arp.h
SYMLINK-FILE include/rte_ether.h
SYMLINK-FILE include/rte_gre.h
SYMLINK-FILE include/rte_net.h
SYMLINK-FILE include/rte_net_crc.h
SYMLINK-FILE include/rte_mpls.h
CC rte_net.o
CC rte_net_crc.o
CC rte_ether.o
CC rte_arp.o
SYMLINK-FILE include/rte_bbdev_op.h
SYMLINK-FILE include/rte_bbdev.h
SYMLINK-FILE include/rte_bbdev_pmd.h
CC rte_bbdev.o
SYMLINK-FILE include/rte_crypto.h
SYMLINK-FILE include/rte_crypto_sym.h
SYMLINK-FILE include/rte_cryptodev.h
SYMLINK-FILE include/rte_cryptodev_pmd.h
SYMLINK-FILE include/rte_crypto_asym.h
CC rte_cryptodev.o
CC rte_cryptodev_pmd.o
AR librte_hash.a
AR librte_net.a
INSTALL-LIB librte_hash.a
INSTALL-LIB librte_net.a
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_member
== Build lib/librte_cmdline
== Build lib/librte_ethdev
== Build lib/librte_sched
AR librte_reorder.a
INSTALL-LIB librte_reorder.a
AR librte_compressdev.a
INSTALL-LIB librte_compressdev.a
SYMLINK-FILE include/rte_lpm.h
SYMLINK-FILE include/rte_sched.h
SYMLINK-FILE include/rte_lpm6.h
SYMLINK-FILE include/rte_sched_common.h
SYMLINK-FILE include/rte_efd.h
SYMLINK-FILE include/rte_red.h
SYMLINK-FILE include/rte_lpm_sse.h
SYMLINK-FILE include/rte_approx.h
CC rte_efd.o
CC rte_lpm.o
CC rte_sched.o
CC rte_lpm6.o
CC rte_red.o
CC rte_approx.o
SYMLINK-FILE include/rte_ethdev.h
SYMLINK-FILE include/rte_ethdev_driver.h
SYMLINK-FILE include/rte_ethdev_pci.h
SYMLINK-FILE include/rte_ethdev_core.h
SYMLINK-FILE include/rte_ethdev_vdev.h
SYMLINK-FILE include/rte_eth_ctrl.h
SYMLINK-FILE include/rte_dev_info.h
SYMLINK-FILE include/rte_flow.h
SYMLINK-FILE include/rte_flow_driver.h
SYMLINK-FILE include/rte_tm.h
SYMLINK-FILE include/cmdline.h
SYMLINK-FILE include/rte_member.h
SYMLINK-FILE include/cmdline_parse.h
SYMLINK-FILE include/cmdline_parse_num.h
SYMLINK-FILE include/cmdline_parse_ipaddr.h
SYMLINK-FILE include/cmdline_parse_etheraddr.h
SYMLINK-FILE include/rte_tm_driver.h
CC rte_member.o
SYMLINK-FILE include/rte_mtr.h
CC rte_member_ht.o
SYMLINK-FILE include/cmdline_parse_string.h
SYMLINK-FILE include/rte_mtr_driver.h
SYMLINK-FILE include/cmdline_rdline.h
SYMLINK-FILE include/cmdline_vt100.h
SYMLINK-FILE include/cmdline_socket.h
CC rte_member_vbf.o
CC ethdev_private.o
SYMLINK-FILE include/cmdline_cirbuf.h
SYMLINK-FILE include/cmdline_parse_portlist.h
CC rte_ethdev.o
CC rte_class_eth.o
CC rte_flow.o
CC cmdline.o
CC rte_tm.o
CC rte_mtr.o
CC cmdline_cirbuf.o
CC cmdline_parse.o
CC ethdev_profile.o
CC cmdline_parse_etheraddr.o
CC cmdline_parse_ipaddr.o
CC cmdline_parse_num.o
CC cmdline_parse_string.o
CC cmdline_rdline.o
CC cmdline_vt100.o
CC cmdline_socket.o
CC cmdline_parse_portlist.o
AR librte_bbdev.a
INSTALL-LIB librte_bbdev.a
AR librte_cmdline.a
INSTALL-LIB librte_cmdline.a
AR librte_cryptodev.a
INSTALL-LIB librte_cryptodev.a
AR librte_lpm.a
INSTALL-LIB librte_lpm.a
AR librte_member.a
INSTALL-LIB librte_member.a
AR librte_efd.a
INSTALL-LIB librte_efd.a
AR librte_sched.a
INSTALL-LIB librte_sched.a
AR librte_ethdev.a
INSTALL-LIB librte_ethdev.a
== Build lib/librte_security
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_ip_frag
== Build lib/librte_vhost
== Build lib/librte_gro
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_distributor
== Build lib/librte_kni
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
SYMLINK-FILE include/rte_gso.h
SYMLINK-FILE include/rte_kni.h
CC rte_gso.o
CC gso_common.o
SYMLINK-FILE include/rte_gro.h
SYMLINK-FILE include/rte_latencystats.h
CC rte_kni.o
SYMLINK-FILE include/rte_bitrate.h
SYMLINK-FILE include/rte_eventdev.h
CC gso_tcp4.o
SYMLINK-FILE include/rte_eventdev_pmd.h
SYMLINK-FILE include/rte_eventdev_pmd_pci.h
CC rte_latencystats.o
CC gso_tunnel_tcp4.o
CC rte_bitrate.o
CC rte_gro.o
SYMLINK-FILE include/rte_eventdev_pmd_vdev.h
CC gso_udp4.o
CC gro_tcp4.o
CC gro_vxlan_tcp4.o
SYMLINK-FILE include/rte_security.h
SYMLINK-FILE include/rte_security_driver.h
SYMLINK-FILE include/rte_pdump.h
SYMLINK-FILE include/rte_event_ring.h
SYMLINK-FILE include/rte_distributor.h
SYMLINK-FILE include/rte_vhost.h
SYMLINK-FILE include/rte_event_eth_rx_adapter.h
SYMLINK-FILE include/rte_event_timer_adapter.h
CC rte_pdump.o
CC rte_security.o
CC rte_distributor_v20.o
SYMLINK-FILE include/rte_vdpa.h
SYMLINK-FILE include/rte_vhost_crypto.h
SYMLINK-FILE include/rte_rawdev.h
SYMLINK-FILE include/rte_event_timer_adapter_pmd.h
CC rte_distributor.o
SYMLINK-FILE include/rte_event_crypto_adapter.h
CC rte_distributor_match_sse.o
SYMLINK-FILE include/rte_rawdev_pmd.h
SYMLINK-FILE include/rte_event_eth_tx_adapter.h
CC fd_man.o
SYMLINK-FILE include/bpf_def.h
SYMLINK-FILE include/rte_ip_frag.h
CC iotlb.o
CC rte_eventdev.o
CC rte_event_ring.o
CC socket.o
CC rte_ipv4_fragmentation.o
CC rte_rawdev.o
SYMLINK-FILE include/rte_bpf.h
SYMLINK-FILE include/rte_bpf_ethdev.h
CC vhost.o
CC rte_ipv6_fragmentation.o
CC vhost_user.o
CC rte_event_eth_rx_adapter.o
CC rte_event_timer_adapter.o
CC virtio_net.o
CC bpf.o
CC vdpa.o
CC rte_event_crypto_adapter.o
CC rte_ipv4_reassembly.o
CC rte_event_eth_tx_adapter.o
CC rte_ipv6_reassembly.o
CC vhost_crypto.o
CC rte_ip_frag_common.o
CC ip_frag_internal.o
CC bpf_exec.o
CC bpf_load.o
AR librte_bitratestats.a
INSTALL-LIB librte_bitratestats.a
CC bpf_pkt.o
CC bpf_validate.o
CC bpf_jit_x86.o
AR librte_latencystats.a
INSTALL-LIB librte_latencystats.a
AR librte_rawdev.a
INSTALL-LIB librte_rawdev.a
AR librte_security.a
AR librte_gro.a
INSTALL-LIB librte_security.a
INSTALL-LIB librte_gro.a
== Build lib/librte_ipsec
SYMLINK-FILE include/rte_ipsec.h
SYMLINK-FILE include/rte_ipsec_group.h
SYMLINK-FILE include/rte_ipsec_sa.h
CC esp_inb.o
CC esp_outb.o
CC sa.o
CC ses.o
AR librte_ip_frag.a
INSTALL-LIB librte_ip_frag.a
AR librte_kni.a
INSTALL-LIB librte_kni.a
== Build lib/librte_port
AR librte_distributor.a
INSTALL-LIB librte_distributor.a
AR librte_gso.a
SYMLINK-FILE include/rte_port.h
SYMLINK-FILE include/rte_port_ethdev.h
SYMLINK-FILE include/rte_port_ring.h
SYMLINK-FILE include/rte_port_frag.h
SYMLINK-FILE include/rte_port_ras.h
SYMLINK-FILE include/rte_port_sched.h
SYMLINK-FILE include/rte_port_fd.h
SYMLINK-FILE include/rte_port_kni.h
SYMLINK-FILE include/rte_port_source_sink.h
SYMLINK-FILE include/rte_port_sym_crypto.h
INSTALL-LIB librte_gso.a
CC rte_port_ethdev.o
CC rte_port_ring.o
CC rte_port_frag.o
CC rte_port_ras.o
CC rte_port_sched.o
CC rte_port_fd.o
CC rte_port_kni.o
CC rte_port_source_sink.o
CC rte_port_sym_crypto.o
AR librte_pdump.a
INSTALL-LIB librte_pdump.a
AR librte_eventdev.a
INSTALL-LIB librte_eventdev.a
AR librte_bpf.a
INSTALL-LIB librte_bpf.a
AR librte_ipsec.a
INSTALL-LIB librte_ipsec.a
AR librte_port.a
INSTALL-LIB librte_port.a
== Build lib/librte_table
SYMLINK-FILE include/rte_table.h
SYMLINK-FILE include/rte_table_lpm.h
SYMLINK-FILE include/rte_table_lpm_ipv6.h
SYMLINK-FILE include/rte_table_acl.h
SYMLINK-FILE include/rte_table_hash.h
SYMLINK-FILE include/rte_table_hash_cuckoo.h
SYMLINK-FILE include/rte_table_hash_func.h
SYMLINK-FILE include/rte_table_hash_func_arm64.h
SYMLINK-FILE include/rte_lru.h
SYMLINK-FILE include/rte_lru_x86.h
SYMLINK-FILE include/rte_table_array.h
SYMLINK-FILE include/rte_table_stub.h
CC rte_table_lpm.o
CC rte_table_lpm_ipv6.o
CC rte_table_acl.o
CC rte_table_hash_cuckoo.o
CC rte_table_hash_key8.o
CC rte_table_hash_key16.o
CC rte_table_hash_key32.o
CC rte_table_hash_ext.o
CC rte_table_hash_lru.o
CC rte_table_array.o
CC rte_table_stub.o
AR librte_table.a
INSTALL-LIB librte_table.a
== Build lib/librte_flow_classify
== Build lib/librte_pipeline
SYMLINK-FILE include/rte_flow_classify.h
CC rte_flow_classify.o
CC rte_flow_classify_parse.o
SYMLINK-FILE include/rte_pipeline.h
SYMLINK-FILE include/rte_port_in_action.h
SYMLINK-FILE include/rte_table_action.h
CC rte_pipeline.o
CC rte_port_in_action.o
CC rte_table_action.o
AR librte_flow_classify.a
INSTALL-LIB librte_flow_classify.a
AR librte_vhost.a
INSTALL-LIB librte_vhost.a
AR librte_pipeline.a
INSTALL-LIB librte_pipeline.a
== Build buildtools
== Build kernel
== Build kernel/linux
== Build buildtools/pmdinfogen
== Build kernel/linux/igb_uio
== Build kernel/linux/kni
HOSTCC pmdinfogen.o
HOSTLD dpdk-pmdinfogen
INSTALL-HOSTAPP dpdk-pmdinfogen
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
CC cpt_pmd_ops_helper.o
CC otx2_dev.o
CC octeontx_mbox.o
CC otx2_irq.o
CC otx2_mbox.o
CC otx2_common.o
SYMLINK-FILE include/dpaax_iova_table.h
CC dpaax_iova_table.o
AR librte_common_octeontx.a
INSTALL-LIB librte_common_octeontx.a
AR librte_common_dpaax.a
INSTALL-LIB librte_common_dpaax.a
AR librte_common_cpt.a
INSTALL-LIB librte_common_cpt.a
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.o
AR librte_common_octeontx2.a
INSTALL-LIB librte_common_octeontx2.a
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_misc.o
CC [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/kni_net.o
== Build drivers/bus
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
Building modules, stage 2.
SYMLINK-FILE include/rte_bus_vdev.h
CC vdev.o
CC vdev_params.o
SYMLINK-FILE include/rte_bus_ifpga.h
CC ifpga_bus.o
CC ifpga_common.o
SYMLINK-FILE include/rte_bus_pci.h
CC dpaa_bus.o
CC base/fman/fman.o
CC base/fman/fman_hw.o
CC base/fman/of.o
CC linux/pci.o
CC pci_params.o
CC linux/pci_uio.o
CC base/fman/netcfg_layer.o
CC linux/pci_vfio.o
CC pci_common.o
CC base/qbman/bman.o
CC pci_common_uio.o
CC base/qbman/process.o
CC base/qbman/bman_driver.o
CC base/qbman/qman.o
CC base/qbman/qman_driver.o
CC base/qbman/dpaa_alloc.o
CC base/qbman/dpaa_sys.o
SYMLINK-FILE include/rte_bus_vmbus.h
SYMLINK-FILE include/rte_vmbus_reg.h
CC linux/vmbus_bus.o
CC linux/vmbus_uio.o
CC vmbus_common.o
CC vmbus_channel.o
CC vmbus_bufring.o
CC vmbus_common_uio.o
CC qbman/qbman_portal.o
CC qbman/qbman_debug.o
CC mc/dpmng.o
CC mc/dpbp.o
CC mc/dpio.o
CC mc/mc_sys.o
CC mc/dpcon.o
CC mc/dpci.o
MODPOST 1 modules
CC mc/dpdmai.o
CC portal/dpaa2_hw_dpio.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.o
Building modules, stage 2.
CC portal/dpaa2_hw_dpbp.o
CC portal/dpaa2_hw_dpci.o
CC fslmc_vfio.o
CC fslmc_bus.o
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.mod.o
AR librte_bus_vdev.a
INSTALL-LIB librte_bus_vdev.a
AR librte_bus_ifpga.a
INSTALL-LIB librte_bus_ifpga.a
AR librte_bus_vmbus.a
INSTALL-LIB librte_bus_vmbus.a
MODPOST 1 modules
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko
INSTALL-MODULE igb_uio.ko
CC /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.mod.o
PMDINFO portal/dpaa2_hw_dpci.o.pmd.c
CC portal/dpaa2_hw_dpci.o.pmd.o
PMDINFO portal/dpaa2_hw_dpbp.o.pmd.c
CC portal/dpaa2_hw_dpbp.o.pmd.o
AR librte_bus_pci.a
INSTALL-LIB librte_bus_pci.a
LD portal/dpaa2_hw_dpci.o
LD portal/dpaa2_hw_dpbp.o
PMDINFO portal/dpaa2_hw_dpio.o.pmd.c
CC portal/dpaa2_hw_dpio.o.pmd.o
LD [M] /root/dpdk/x86_64-native-linuxapp-gcc/build/kernel/linux/kni/rte_kni.ko
INSTALL-MODULE rte_kni.ko
LD portal/dpaa2_hw_dpio.o
AR librte_bus_fslmc.a
INSTALL-LIB librte_bus_fslmc.a
AR librte_bus_dpaa.a
INSTALL-LIB librte_bus_dpaa.a
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
CC rte_mempool_bucket.o
SYMLINK-FILE include/rte_dpaa2_mempool.h
CC dpaa2_hw_mempool.o
CC rte_mempool_ring.o
CC dpaa_mempool.o
CC rte_mempool_stack.o
CC otx2_mempool_ops.o
CC otx2_mempool.o
CC otx2_mempool_irq.o
CC otx2_mempool_debug.o
CC octeontx_fpavf.o
CC rte_mempool_octeontx.o
PMDINFO octeontx_fpavf.o.pmd.c
CC octeontx_fpavf.o.pmd.o
LD octeontx_fpavf.o
AR librte_mempool_octeontx.a
INSTALL-LIB librte_mempool_octeontx.a
AR librte_mempool_stack.a
INSTALL-LIB librte_mempool_stack.a
PMDINFO otx2_mempool.o.pmd.c
CC otx2_mempool.o.pmd.o
LD otx2_mempool.o
AR librte_mempool_dpaa.a
INSTALL-LIB librte_mempool_dpaa.a
AR librte_mempool_ring.a
INSTALL-LIB librte_mempool_ring.a
AR librte_mempool_dpaa2.a
INSTALL-LIB librte_mempool_dpaa2.a
AR librte_mempool_octeontx2.a
INSTALL-LIB librte_mempool_octeontx2.a
AR librte_mempool_bucket.a
INSTALL-LIB librte_mempool_bucket.a
== Build drivers/net
== Build drivers/baseband
== Build drivers/crypto
== Build drivers/common/qat
== Build drivers/compress
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/avp
== Build drivers/net/atlantic
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa2
== Build drivers/net/dpaa
== Build drivers/net/e1000
== Build drivers/crypto/octeontx
== Build drivers/crypto/null
== Build drivers/crypto/scheduler
== Build drivers/crypto/dpaa2_sec
== Build drivers/crypto/dpaa_sec
== Build drivers/crypto/virtio
== Build drivers/crypto/nitrox
== Build drivers/crypto/caam_jr
== Build drivers/net/ena
== Build drivers/net/failsafe
== Build drivers/net/enic
== Build drivers/net/enetc
== Build drivers/net/i40e
== Build drivers/net/hinic
== Build drivers/net/fm10k
== Build drivers/net/hns3
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
CC qat_comp.o
== Build drivers/net/liquidio
== Build drivers/net/memif
CC qat_comp_pmd.o
== Build drivers/net/netvsc
== Build drivers/net/nfp
== Build drivers/compress/octeontx
== Build drivers/baseband/null
CC ena_ethdev.o
CC axgbe_ethdev.o
CC virtqueue.o
SYMLINK-FILE include/rte_eth_bond.h
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC rte_eth_af_packet.o
SYMLINK-FILE include/rte_avp_common.h
CC enetc_ethdev.o
CC null_crypto_pmd.o
CC caam_jr.o
CC lio_ethdev.o
CC dpaa_sec.o
SYMLINK-FILE include/rte_pmd_dpaa.h
CC rte_eth_memif.o
CC atl_rxtx.o
CC otx_cryptodev.o
CC ark_ddm.o
CC nitrox_device.o
CC hns3_ethdev.o
CC ipn3ke_ethdev.o
CC iavf_adminq.o
SYMLINK-FILE include/rte_cryptodev_scheduler_operations.h
CC failsafe.o
CC hn_ethdev.o
SYMLINK-FILE include/rte_eth_bond_8023ad.h
SYMLINK-FILE include/rte_avp_fifo.h
CC nfp_cppcore.o
CC dpaa_ethdev.o
CC base/dpaa2_hw_dpni.o
CC hinic_pmd_api_cmd.o
CC cxgbe_ethdev.o
CC otx_zip_pmd.o
SYMLINK-FILE include/rte_cryptodev_scheduler.h
CC bbdev_null.o
CC avp_ethdev.o
CC dpaa2_sec_dpseci.o
CC enic_ethdev.o
CC rte_eth_bond_api.o
CC scheduler_pmd.o
CC fm10k_ethdev.o
SYMLINK-FILE include/rte_pmd_ice.h
CC e1000_80003es2lan.o
CC ice_controlq.o
SYMLINK-FILE include/rte_pmd_i40e.h
CC i40e_adminq.o
SYMLINK-FILE include/rte_pmd_ixgbe.h
CC ixgbe_common.o
CC ark_ethdev.o
CC hn_rxtx.o
CC e1000_82540.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
PMDINFO otx_cryptodev.o.pmd.c
CC otx_cryptodev.o.pmd.o
LD nitrox_device.o
LD otx_cryptodev.o
CC nitrox_hal.o
CC otx_cryptodev_capabilities.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
CC qat_device.o
LD axgbe_ethdev.o
CC axgbe_dev.o
CC e1000_82541.o
PMDINFO failsafe.o.pmd.c
CC failsafe.o.pmd.o
CC dpaa2_rxtx.o
LD failsafe.o
CC failsafe_args.o
CC scheduler_pmd_ops.o
CC hinic_pmd_cfg.o
CC nitrox_logs.o
PMDINFO ipn3ke_ethdev.o.pmd.c
CC ipn3ke_ethdev.o.pmd.o
LD ipn3ke_ethdev.o
PMDINFO bbdev_null.o.pmd.c
CC ipn3ke_representor.o
CC bbdev_null.o.pmd.o
CC nitrox_sym.o
LD bbdev_null.o
PMDINFO hn_ethdev.o.pmd.c
CC hn_ethdev.o.pmd.o
CC virtio_pci.o
AR librte_pmd_bbdev_null.a
INSTALL-LIB librte_pmd_bbdev_null.a
LD hn_ethdev.o
== Build drivers/baseband/turbo_sw
PMDINFO null_crypto_pmd.o.pmd.c
CC null_crypto_pmd.o.pmd.o
CC qat_common.o
LD null_crypto_pmd.o
CC e1000_82542.o
CC null_crypto_pmd_ops.o
PMDINFO ark_ethdev.o.pmd.c
PMDINFO enic_ethdev.o.pmd.c
CC ark_ethdev.o.pmd.o
CC enic_ethdev.o.pmd.o
CC nfp_cpp_pcie_ops.o
PMDINFO otx_zip_pmd.o.pmd.c
CC otx_zip_pmd.o.pmd.o
LD enic_ethdev.o
LD ark_ethdev.o
LD otx_zip_pmd.o
CC enic_main.o
CC ark_ethdev_rx.o
CC otx_cryptodev_hw_access.o
CC rte_eth_bond_pmd.o
CC otx_zip.o
PMDINFO enetc_ethdev.o.pmd.c
CC enetc_ethdev.o.pmd.o
PMDINFO dpaa_ethdev.o.pmd.c
CC dpaa_ethdev.o.pmd.o
LD enetc_ethdev.o
LD dpaa_ethdev.o
CC enetc_rxtx.o
CC dpaa_rxtx.o
PMDINFO lio_ethdev.o.pmd.c
CC lio_ethdev.o.pmd.o
CC bbdev_turbo_software.o
CC e1000_82543.o
LD lio_ethdev.o
CC lio_rxtx.o
PMDINFO qat_device.o.pmd.c
CC qat_device.o.pmd.o
LD qat_device.o
CC lio_23xx_vf.o
PMDINFO rte_eth_memif.o.pmd.c
CC rte_eth_memif.o.pmd.o
CC hinic_pmd_cmdq.o
PMDINFO rte_eth_af_packet.o.pmd.c
LD rte_eth_memif.o
CC rte_eth_af_packet.o.pmd.o
LD rte_eth_af_packet.o
CC memif_socket.o
AR librte_pmd_af_packet.a
INSTALL-LIB librte_pmd_af_packet.a
CC hinic_pmd_eqs.o
CC atl_ethdev.o
CC rte_cryptodev_scheduler.o
CC qat_logs.o
CC e1000_82571.o
CC failsafe_eal.o
CC virtio_rxtx.o
CC ixgbe_82598.o
CC qat_qp.o
AR librte_pmd_octeontx_zip.a
INSTALL-LIB librte_pmd_octeontx_zip.a
== Build drivers/net/bnxt
CC otx_cryptodev_mbox.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
LD cxgbe_ethdev.o
AR librte_pmd_null_crypto.a
INSTALL-LIB librte_pmd_null_crypto.a
CC hinic_pmd_hwdev.o
CC cxgbevf_ethdev.o
CC nitrox_sym_capabilities.o
CC axgbe_mdio.o
SYMLINK-FILE include/rte_pmd_bnxt.h
CC bnxt_cpr.o
CC ixgbe_82599.o
CC iavf_common.o
CC e1000_82575.o
AR librte_pmd_enetc.a
CC otx_cryptodev_ops.o
INSTALL-LIB librte_pmd_enetc.a
CC virtio_cryptodev.o
CC i40e_common.o
PMDINFO fm10k_ethdev.o.pmd.c
CC fm10k_ethdev.o.pmd.o
LD fm10k_ethdev.o
CC nfp_mutex.o
CC nfp_resource.o
CC nfp_crc.o
CC fm10k_rxtx.o
PMDINFO hns3_ethdev.o.pmd.c
CC hns3_ethdev.o.pmd.o
LD hns3_ethdev.o
PMDINFO bbdev_turbo_software.o.pmd.c
CC bbdev_turbo_software.o.pmd.o
CC ipn3ke_tm.o
CC hns3_ethdev_vf.o
CC ice_common.o
LD bbdev_turbo_software.o
CC fm10k_pf.o
AR librte_pmd_bbdev_turbo_sw.a
INSTALL-LIB librte_pmd_bbdev_turbo_sw.a
CC failsafe_ops.o
== Build drivers/baseband/fpga_lte_fec
CC nitrox_sym_reqmgr.o
CC nfp_mip.o
AR librte_pmd_memif.a
INSTALL-LIB librte_pmd_memif.a
CC nfp_nffw.o
CC ark_ethdev_tx.o
AR librte_pmd_qat.a
INSTALL-LIB librte_pmd_qat.a
CC ice_sched.o
SYMLINK-FILE include/fpga_lte_fec.h
PMDINFO cxgbevf_ethdev.o.pmd.c
CC cxgbevf_ethdev.o.pmd.o
CC fpga_lte_fec.o
LD cxgbevf_ethdev.o
CC cxgbe_main.o
PMDINFO ena_ethdev.o.pmd.c
CC ena_ethdev.o.pmd.o
CC bnxt_ethdev.o
LD ena_ethdev.o
CC ena_com.o
CC ixgbe_x540.o
CC axgbe_phy_impl.o
CC axgbe_i2c.o
CC axgbe_rxtx.o
PMDINFO atl_ethdev.o.pmd.c
CC atl_ethdev.o.pmd.o
LD atl_ethdev.o
CC atl_hw_regs.o
CC hw_atl_utils.o
CC hinic_pmd_hwif.o
CC enic_rxtx.o
CC e1000_i210.o
CC scheduler_roundrobin.o
CC nfp_hwinfo.o
CC nfp_rtsym.o
CC ixgbe_x550.o
CC ena_eth_com.o
CC hn_rndis.o
CC iavf_ethdev.o
CC nitrox_qp.o
CC dpaa2_ethdev.o
CC lio_mbox.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
CC e1000_api.o
AR librte_pmd_virtio_crypto.a
PMDINFO hns3_ethdev_vf.o.pmd.c
CC hns3_ethdev_vf.o.pmd.o
INSTALL-LIB librte_pmd_virtio_crypto.a
CC e1000_ich8lan.o
LD hns3_ethdev_vf.o
CC hns3_cmd.o
CC ipn3ke_flow.o
CC hns3_mbx.o
CC hns3_rxtx.o
CC hns3_rss.o
CC dpaa2_flow.o
AR librte_pmd_ena.a
INSTALL-LIB librte_pmd_ena.a
CC e1000_logs.o
CC hinic_pmd_mgmt.o
CC hinic_pmd_niccfg.o
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
CC hinic_pmd_nicio.o
CC hw_atl_llh.o
LD avp_ethdev.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC scheduler_pkt_size_distr.o
CC hw_atl_utils_fw2x.o
CC nfp_nsp.o
CC scheduler_failover.o
CC scheduler_multicore.o
PMDINFO fpga_lte_fec.o.pmd.c
PMDINFO rte_eth_bond_pmd.o.pmd.c
CC fpga_lte_fec.o.pmd.o
CC rte_eth_bond_pmd.o.pmd.o
LD rte_eth_bond_pmd.o
LD fpga_lte_fec.o
AR librte_pmd_dpaa.a
INSTALL-LIB librte_pmd_dpaa.a
CC cxgbevf_main.o
CC sge.o
CC rte_eth_bond_args.o
AR librte_pmd_bbdev_fpga_lte_fec.a
INSTALL-LIB librte_pmd_bbdev_fpga_lte_fec.a
CC nfp_nsp_cmds.o
CC hn_nvs.o
AR librte_pmd_lio.a
INSTALL-LIB librte_pmd_lio.a
CC bnxt_filter.o
CC bnxt_flow.o
CC bnxt_hwrm.o
CC hw_atl_b0.o
PMDINFO caam_jr.o.pmd.c
CC caam_jr.o.pmd.o
LD caam_jr.o
CC caam_jr_capabilities.o
CC fm10k_tlv.o
CC caam_jr_hw.o
CC caam_jr_uio.o
CC ixgbe_phy.o
CC bnxt_ring.o
CC bnxt_rxq.o
CC rte_pmd_atlantic.o
CC bnxt_rxr.o
CC bnxt_stats.o
CC nfp_nsp_eth.o
CC axgbe_rxtx_vec_sse.o
CC bnxt_txq.o
PMDINFO dpaa2_ethdev.o.pmd.c
CC dpaa2_ethdev.o.pmd.o
CC hinic_pmd_wq.o
LD dpaa2_ethdev.o
AR librte_pmd_ipn3ke.a
INSTALL-LIB librte_pmd_ipn3ke.a
CC i40e_diag.o
CC nfp_net.o
CC rte_eth_bond_8023ad.o
== Build drivers/net/null
CC fm10k_common.o
CC fm10k_mbx.o
CC fm10k_vf.o
CC hn_vf.o
CC fm10k_api.o
CC e1000_mac.o
CC e1000_manage.o
CC rte_eth_bond_alb.o
CC rte_eth_null.o
CC rte_eth_bond_flow.o
PMDINFO bnxt_ethdev.o.pmd.c
CC bnxt_ethdev.o.pmd.o
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
CC ice_switch.o
LD bnxt_ethdev.o
CC ice_nvm.o
CC ice_flex_pipe.o
CC ice_flow.o
CC dpaa2_mux.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
AR librte_pmd_atlantic.a
CC ice_dcb.o
INSTALL-LIB librte_pmd_atlantic.a
CC ice_fdir.o
CC ixgbe_api.o
CC dpaa2_sparser.o
CC hinic_pmd_ethdev.o
CC hns3_flow.o
CC i40e_hmc.o
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
CC fm10k_rxtx_vec.o
CC hns3_fdir.o
LD dpaa_sec.o
CC hns3_intr.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
CC e1000_mbx.o
CC e1000_nvm.o
CC e1000_osdep.o
CC enic_clsf.o
CC enic_res.o
CC enic_flow.o
AR librte_pmd_axgbe.a
CC base/vnic_cq.o
INSTALL-LIB librte_pmd_axgbe.a
CC base/vnic_wq.o
CC ixgbe_vf.o
AR librte_pmd_netvsc.a
CC hns3_stats.o
INSTALL-LIB librte_pmd_netvsc.a
CC hns3_regs.o
CC hns3_dcb.o
CC failsafe_rxtx.o
CC failsafe_ether.o
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
CC e1000_phy.o
CC bnxt_txr.o
LD dpaa2_sec_dpseci.o
CC mc/dpseci.o
PMDINFO iavf_ethdev.o.pmd.c
CC iavf_ethdev.o.pmd.o
PMDINFO dpaa2_mux.o.pmd.c
CC dpaa2_mux.o.pmd.o
LD iavf_ethdev.o
LD dpaa2_mux.o
CC iavf_vchnl.o
CC iavf_rxtx.o
CC iavf_rxtx_vec_sse.o
CC ixgbe_hv_vf.o
CC mc/dpni.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
CC cxgbe_filter.o
CC i40e_lan_hmc.o
CC ixgbe_dcb.o
CC cxgbe_flow.o
CC t4_hw.o
CC clip_tbl.o
CC mps_tcam.o
CC hns3_mp.o
CC base/vnic_dev.o
CC base/vnic_intr.o
CC ice_ethdev.o
CC ice_rxtx.o
CC ice_rxtx_vec_sse.o
CC i40e_nvm.o
CC e1000_vf.o
PMDINFO hinic_pmd_ethdev.o.pmd.c
CC hinic_pmd_ethdev.o.pmd.o
LD hinic_pmd_ethdev.o
CC i40e_dcb.o
CC hinic_pmd_rx.o
CC i40e_ethdev.o
CC mc/dpkg.o
CC i40e_rxtx.o
CC failsafe_flow.o
CC mc/dpdmux.o
CC igb_ethdev.o
CC ixgbe_dcb_82599.o
CC ixgbe_dcb_82598.o
CC ixgbe_mbx.o
AR librte_pmd_hns3.a
INSTALL-LIB librte_pmd_hns3.a
CC ixgbe_rxtx.o
CC ixgbe_ethdev.o
PMDINFO nfp_net.o.pmd.c
CC nfp_net.o.pmd.o
CC ixgbe_fdir.o
LD nfp_net.o
AR librte_pmd_nfp.a
INSTALL-LIB librte_pmd_nfp.a
CC ixgbe_pf.o
CC ixgbe_flow.o
AR librte_pmd_dpaa2.a
PMDINFO rte_eth_null.o.pmd.c
CC rte_eth_null.o.pmd.o
INSTALL-LIB librte_pmd_dpaa2.a
CC ixgbe_rxtx_vec_sse.o
LD rte_eth_null.o
AR librte_pmd_bond.a
AR librte_pmd_null.a
INSTALL-LIB librte_pmd_bond.a
INSTALL-LIB librte_pmd_null.a
CC bnxt_vnic.o
CC hinic_pmd_tx.o
CC bnxt_irq.o
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
== Build drivers/net/qede
== Build drivers/net/ring
CC octeontx_rxtx.o
CC otx2_rx.o
== Build drivers/net/sfc
== Build drivers/net/tap
CC ecore_dev.o
SYMLINK-FILE include/rte_eth_ring.h
CC rte_eth_ring.o
CC failsafe_intr.o
CC ice_switch_filter.o
AR librte_pmd_fm10k.a
INSTALL-LIB librte_pmd_fm10k.a
CC ecore_hw.o
CC sfc_ethdev.o
CC i40e_rxtx_vec_sse.o
CC ice_rxtx_vec_avx2.o
CC i40e_ethdev_vf.o
CC octeontx_pkovf.o
CC rte_eth_tap.o
PMDINFO octeontx_pkovf.o.pmd.c
CC octeontx_pkovf.o.pmd.o
LD octeontx_pkovf.o
CC octeontx_pkivf.o
CC sfc_kvargs.o
CC bnxt_util.o
CC rte_pmd_bnxt.o
PMDINFO octeontx_pkivf.o.pmd.c
CC octeontx_pkivf.o.pmd.o
CC ice_generic_flow.o
LD octeontx_pkivf.o
CC octeontx_bgx.o
== Build drivers/net/thunderx
CC octeontx_ethdev.o
== Build drivers/net/vdev_netvsc
CC base/vnic_rq.o
CC enic_rxtx_vec_avx2.o
CC i40e_pf.o
PMDINFO rte_eth_ring.o.pmd.c
CC rte_eth_ring.o.pmd.o
CC nicvf_rxtx.o
AR librte_pmd_iavf.a
LD rte_eth_ring.o
INSTALL-LIB librte_pmd_iavf.a
CC i40e_fdir.o
AR librte_pmd_ring.a
INSTALL-LIB librte_pmd_ring.a
CC i40e_flow.o
CC vdev_netvsc.o
CC rte_pmd_i40e.o
CC i40e_tm.o
AR librte_pmd_failsafe.a
INSTALL-LIB librte_pmd_failsafe.a
CC i40e_vf_representor.o
CC i40e_rxtx_vec_avx2.o
CC l2t.o
CC t4vf_hw.o
PMDINFO octeontx_ethdev.o.pmd.c
CC octeontx_ethdev.o.pmd.o
LD octeontx_ethdev.o
AR librte_pmd_octeontx.a
INSTALL-LIB librte_pmd_octeontx.a
CC ixgbe_ipsec.o
CC rte_pmd_ixgbe.o
PMDINFO ice_ethdev.o.pmd.c
CC ice_ethdev.o.pmd.o
CC bnxt_rxtx_vec_sse.o
LD ice_ethdev.o
CC ixgbe_tm.o
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
CC igb_rxtx.o
CC igb_pf.o
CC ixgbe_vf_representor.o
CC igb_flow.o
AR librte_pmd_enic.a
INSTALL-LIB librte_pmd_enic.a
== Build drivers/net/virtio
CC nicvf_hw.o
PMDINFO vdev_netvsc.o.pmd.c
PMDINFO i40e_ethdev_vf.o.pmd.c
CC vdev_netvsc.o.pmd.o
CC i40e_ethdev_vf.o.pmd.o
LD i40e_ethdev_vf.o
LD vdev_netvsc.o
CC nicvf_mbox.o
CC nicvf_ethdev.o
AR librte_pmd_vdev_netvsc.a
INSTALL-LIB librte_pmd_vdev_netvsc.a
CC nicvf_bsvf.o
CC em_ethdev.o
CC nicvf_svf.o
PMDINFO sfc_ethdev.o.pmd.c
CC sfc_ethdev.o.pmd.o
CC tap_flow.o
LD sfc_ethdev.o
CC sfc.o
CC sfc_mcdi.o
CC sfc_intr.o
CC virtqueue.o
AR librte_pmd_cxgbe.a
CC sfc_ev.o
INSTALL-LIB librte_pmd_cxgbe.a
CC sfc_port.o
== Build drivers/net/vmxnet3
== Build drivers/net/kni
CC sfc_rx.o
== Build drivers/net/softnic
CC virtio_pci.o
CC virtio_rxtx.o
CC virtio_ethdev.o
== Build drivers/net/vhost
== Build drivers/net/ifc
AR librte_pmd_hinic.a
CC vmxnet3_rxtx.o
INSTALL-LIB librte_pmd_hinic.a
CC em_rxtx.o
CC rte_eth_kni.o
SYMLINK-FILE include/rte_eth_softnic.h
CC rte_eth_softnic.o
CC rte_eth_softnic_mempool.o
CC rte_eth_softnic_swq.o
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
CC rte_eth_softnic_link.o
CC virtio_rxtx_simple.o
SYMLINK-FILE include/rte_eth_vhost.h
CC ifcvf_vdpa.o
CC rte_eth_vhost.o
CC rte_eth_softnic_tm.o
PMDINFO ixgbe_ethdev.o.pmd.c
CC ixgbe_ethdev.o.pmd.o
LD ixgbe_ethdev.o
CC sfc_tx.o
CC ifcvf.o
CC tap_netlink.o
PMDINFO em_ethdev.o.pmd.c
CC em_ethdev.o.pmd.o
LD em_ethdev.o
CC ecore_cxt.o
CC tap_tcmsgs.o
CC tap_bpf_api.o
CC sfc_tso.o
CC ecore_l2.o
CC sfc_filter.o
CC tap_intr.o
CC ecore_sp_commands.o
PMDINFO nicvf_ethdev.o.pmd.c
CC nicvf_ethdev.o.pmd.o
LD nicvf_ethdev.o
CC ark_mpu.o
CC rte_eth_softnic_tap.o
CC rte_eth_softnic_action.o
AR librte_pmd_thunderx_nicvf.a
INSTALL-LIB librte_pmd_thunderx_nicvf.a
CC rte_eth_softnic_pipeline.o
CC virtio_rxtx_simple_sse.o
PMDINFO rte_eth_kni.o.pmd.c
CC rte_eth_kni.o.pmd.o
CC virtio_user/vhost_user.o
LD rte_eth_kni.o
AR librte_pmd_kni.a
CC virtio_user/vhost_kernel.o
INSTALL-LIB librte_pmd_kni.a
CC rte_eth_softnic_thread.o
CC ecore_init_fw_funcs.o
CC ark_pktchkr.o
AR librte_pmd_bnxt.a
INSTALL-LIB librte_pmd_bnxt.a
CC otx2_tx.o
CC virtio_user/vhost_kernel_tap.o
PMDINFO rte_eth_softnic.o.pmd.c
CC rte_eth_softnic.o.pmd.o
LD rte_eth_softnic.o
AR librte_pmd_ice.a
INSTALL-LIB librte_pmd_ice.a
CC virtio_user/virtio_user_dev.o
CC virtio_user_ethdev.o
CC rte_eth_softnic_cli.o
CC rte_eth_softnic_flow.o
CC rte_eth_softnic_meter.o
CC rte_eth_softnic_cryptodev.o
CC sfc_flow.o
PMDINFO ifcvf_vdpa.o.pmd.c
CC ifcvf_vdpa.o.pmd.o
AR librte_pmd_ixgbe.a
INSTALL-LIB librte_pmd_ixgbe.a
LD ifcvf_vdpa.o
CC sfc_dp.o
AR librte_pmd_ifc.a
INSTALL-LIB librte_pmd_ifc.a
CC sfc_ef10_rx.o
CC ecore_spq.o
CC parser.o
CC conn.o
CC sfc_ef10_essb_rx.o
CC sfc_ef10_tx.o
CC efx_bootcfg.o
CC efx_crc32.o
CC efx_ev.o
CC efx_evb.o
CC ecore_init_ops.o
PMDINFO rte_eth_tap.o.pmd.c
CC rte_eth_tap.o.pmd.o
LD rte_eth_tap.o
CC ecore_mcp.o
CC ark_pktdir.o
AR librte_pmd_tap.a
CC ark_pktgen.o
INSTALL-LIB librte_pmd_tap.a
CC ark_rqp.o
CC ark_udm.o
CC efx_filter.o
CC efx_hash.o
PMDINFO virtio_ethdev.o.pmd.c
CC virtio_ethdev.o.pmd.o
PMDINFO virtio_user_ethdev.o.pmd.c
CC virtio_user_ethdev.o.pmd.o
CC efx_intr.o
LD virtio_ethdev.o
LD virtio_user_ethdev.o
CC otx2_tm.o
CC ecore_int.o
CC ecore_dcbx.o
PMDINFO rte_eth_vhost.o.pmd.c
CC rte_eth_vhost.o.pmd.o
LD rte_eth_vhost.o
CC bcm_osal.o
AR librte_pmd_vhost.a
INSTALL-LIB librte_pmd_vhost.a
CC ecore_sriov.o
CC ecore_vf.o
CC efx_lic.o
CC efx_mac.o
CC efx_mcdi.o
CC efx_mon.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
CC efx_nic.o
CC otx2_rss.o
CC otx2_mac.o
CC otx2_ptp.o
CC otx2_flow.o
CC otx2_link.o
CC efx_nvram.o
CC qede_ethdev.o
CC efx_phy.o
PMDINFO i40e_ethdev.o.pmd.c
CC i40e_ethdev.o.pmd.o
CC qede_main.o
LD i40e_ethdev.o
AR librte_pmd_i40e.a
INSTALL-LIB librte_pmd_i40e.a
CC efx_port.o
CC vmxnet3_ethdev.o
CC otx2_vlan.o
CC efx_proxy.o
CC otx2_stats.o
CC otx2_lookup.o
CC otx2_ethdev.o
CC otx2_flow_ctrl.o
AR librte_pmd_ark.a
INSTALL-LIB librte_pmd_ark.a
CC otx2_flow_parse.o
CC otx2_flow_utils.o
CC otx2_ethdev_irq.o
CC otx2_ethdev_ops.o
CC qede_rxtx.o
CC efx_rx.o
CC efx_sram.o
CC efx_tunnel.o
CC efx_tx.o
CC otx2_ethdev_debug.o
CC efx_vpd.o
CC otx2_ethdev_devargs.o
CC mcdi_mon.o
CC qede_filter.o
CC siena_mac.o
CC siena_mcdi.o
CC siena_nic.o
CC siena_nvram.o
CC siena_phy.o
CC siena_sram.o
CC siena_vpd.o
CC ef10_ev.o
CC ef10_evb.o
CC ef10_filter.o
CC ef10_intr.o
PMDINFO vmxnet3_ethdev.o.pmd.c
CC vmxnet3_ethdev.o.pmd.o
CC ef10_image.o
CC ef10_mac.o
CC ef10_mcdi.o
CC ef10_nic.o
LD vmxnet3_ethdev.o
CC ef10_nvram.o
CC ef10_phy.o
CC ef10_proxy.o
AR librte_pmd_vmxnet3_uio.a
CC ef10_rx.o
INSTALL-LIB librte_pmd_vmxnet3_uio.a
CC ef10_tx.o
CC ef10_vpd.o
CC hunt_nic.o
CC medford_nic.o
CC medford2_nic.o
AR librte_pmd_softnic.a
INSTALL-LIB librte_pmd_softnic.a
PMDINFO qede_ethdev.o.pmd.c
CC qede_ethdev.o.pmd.o
LD qede_ethdev.o
PMDINFO otx2_ethdev.o.pmd.c
CC otx2_ethdev.o.pmd.o
LD otx2_ethdev.o
AR librte_pmd_sfc_efx.a
INSTALL-LIB librte_pmd_sfc_efx.a
AR librte_pmd_virtio.a
INSTALL-LIB librte_pmd_virtio.a
AR librte_pmd_qede.a
INSTALL-LIB librte_pmd_qede.a
AR librte_pmd_octeontx2.a
INSTALL-LIB librte_pmd_octeontx2.a
== Build drivers/event
== Build drivers/event/skeleton
== Build drivers/event/sw
== Build drivers/event/dsw
== Build drivers/event/octeontx
== Build drivers/event/octeontx2
== Build drivers/event/dpaa2
== Build drivers/event/dpaa
== Build drivers/event/opdl
CC otx2_worker_dual.o
CC otx2_worker.o
CC otx2_tim_worker.o
CC otx2_evdev.o
CC otx2_evdev_adptr.o
CC otx2_tim_evdev.o
CC dpaa_eventdev.o
CC otx2_evdev_selftest.o
CC otx2_evdev_irq.o
CC skeleton_eventdev.o
CC dpaa2_hw_dpcon.o
CC dpaa2_eventdev.o
CC dpaa2_eventdev_selftest.o
CC dsw_evdev.o
CC dsw_event.o
CC dsw_xstats.o
CC opdl_ring.o
CC opdl_evdev.o
CC opdl_evdev_init.o
CC opdl_evdev_xstats.o
CC sw_evdev.o
CC opdl_test.o
CC sw_evdev_worker.o
CC sw_evdev_scheduler.o
CC ssovf_worker.o
CC ssovf_evdev.o
CC sw_evdev_xstats.o
CC sw_evdev_selftest.o
CC ssovf_evdev_selftest.o
CC ssovf_probe.o
CC timvf_worker.o
CC timvf_evdev.o
CC timvf_probe.o
PMDINFO skeleton_eventdev.o.pmd.c
CC skeleton_eventdev.o.pmd.o
LD skeleton_eventdev.o
AR librte_pmd_skeleton_event.a
INSTALL-LIB librte_pmd_skeleton_event.a
PMDINFO dsw_evdev.o.pmd.c
CC dsw_evdev.o.pmd.o
LD dsw_evdev.o
PMDINFO opdl_evdev.o.pmd.c
CC opdl_evdev.o.pmd.o
LD opdl_evdev.o
PMDINFO ssovf_evdev.o.pmd.c
CC ssovf_evdev.o.pmd.o
LD ssovf_evdev.o
PMDINFO ssovf_probe.o.pmd.c
CC ssovf_probe.o.pmd.o
LD ssovf_probe.o
PMDINFO dpaa2_hw_dpcon.o.pmd.c
CC dpaa2_hw_dpcon.o.pmd.o
LD dpaa2_hw_dpcon.o
PMDINFO timvf_probe.o.pmd.c
CC timvf_probe.o.pmd.o
LD timvf_probe.o
PMDINFO dpaa2_eventdev.o.pmd.c
CC dpaa2_eventdev.o.pmd.o
PMDINFO sw_evdev.o.pmd.c
CC sw_evdev.o.pmd.o
LD dpaa2_eventdev.o
LD sw_evdev.o
PMDINFO dpaa_eventdev.o.pmd.c
CC dpaa_eventdev.o.pmd.o
LD dpaa_eventdev.o
AR librte_pmd_dpaa_event.a
INSTALL-LIB librte_pmd_dpaa_event.a
AR librte_pmd_octeontx_ssovf.a
INSTALL-LIB librte_pmd_octeontx_ssovf.a
AR librte_pmd_dpaa2_event.a
INSTALL-LIB librte_pmd_dpaa2_event.a
AR librte_pmd_dsw_event.a
INSTALL-LIB librte_pmd_dsw_event.a
PMDINFO otx2_evdev.o.pmd.c
CC otx2_evdev.o.pmd.o
LD otx2_evdev.o
AR librte_pmd_sw_event.a
INSTALL-LIB librte_pmd_sw_event.a
AR librte_pmd_opdl_event.a
INSTALL-LIB librte_pmd_opdl_event.a
AR librte_pmd_octeontx2_event.a
INSTALL-LIB librte_pmd_octeontx2_event.a
== Build drivers/raw
== Build drivers/raw/skeleton
== Build drivers/raw/dpaa2_cmdif
== Build drivers/raw/ioat
== Build drivers/raw/dpaa2_qdma
== Build drivers/raw/ifpga
== Build drivers/raw/ntb
== Build drivers/raw/octeontx2_dma
CC otx2_dpi_rawdev.o
CC otx2_dpi_msg.o
CC otx2_dpi_test.o
CC skeleton_rawdev.o
CC skeleton_rawdev_test.o
SYMLINK-FILE include/rte_ioat_rawdev.h
SYMLINK-FILE include/rte_ioat_spec.h
SYMLINK-FILE include/rte_pmd_dpaa2_cmdif.h
CC ioat_rawdev.o
CC ioat_rawdev_test.o
CC ntb.o
CC dpaa2_cmdif.o
CC ntb_hw_intel.o
SYMLINK-FILE include/rte_pmd_dpaa2_qdma.h
CC dpaa2_qdma.o
CC ifpga_api.o
CC ifpga_enumerate.o
CC ifpga_feature_dev.o
CC ifpga_fme.o
CC ifpga_fme_iperf.o
CC ifpga_fme_dperf.o
CC ifpga_fme_error.o
CC ifpga_port.o
CC ifpga_port_error.o
CC opae_hw_api.o
CC opae_ifpga_hw_api.o
CC opae_debug.o
CC ifpga_fme_pr.o
CC opae_spi.o
CC opae_spi_transaction.o
CC opae_intel_max10.o
CC opae_i2c.o
CC opae_at24_eeprom.o
CC opae_eth_group.o
CC ifpga_rawdev.o
PMDINFO dpaa2_cmdif.o.pmd.c
CC dpaa2_cmdif.o.pmd.o
LD dpaa2_cmdif.o
AR librte_rawdev_dpaa2_cmdif.a
INSTALL-LIB librte_rawdev_dpaa2_cmdif.a
PMDINFO ioat_rawdev.o.pmd.c
CC ioat_rawdev.o.pmd.o
LD ioat_rawdev.o
PMDINFO skeleton_rawdev.o.pmd.c
CC skeleton_rawdev.o.pmd.o
LD skeleton_rawdev.o
AR librte_rawdev_skeleton.a
INSTALL-LIB librte_rawdev_skeleton.a
PMDINFO ifpga_rawdev.o.pmd.c
CC ifpga_rawdev.o.pmd.o
LD ifpga_rawdev.o
PMDINFO otx2_dpi_rawdev.o.pmd.c
CC otx2_dpi_rawdev.o.pmd.o
LD otx2_dpi_rawdev.o
AR librte_rawdev_octeontx2_dma.a
INSTALL-LIB librte_rawdev_octeontx2_dma.a
AR librte_rawdev_ifpga.a
INSTALL-LIB librte_rawdev_ifpga.a
AR librte_rawdev_ioat.a
INSTALL-LIB librte_rawdev_ioat.a
PMDINFO ntb.o.pmd.c
CC ntb.o.pmd.o
PMDINFO dpaa2_qdma.o.pmd.c
CC dpaa2_qdma.o.pmd.o
LD ntb.o
LD dpaa2_qdma.o
AR librte_rawdev_ntb.a
INSTALL-LIB librte_rawdev_ntb.a
AR librte_rawdev_dpaa2_qdma.a
INSTALL-LIB librte_rawdev_dpaa2_qdma.a
== Build app
== Build app/test
== Build app/test-pmd
== Build app/proc-info
== Build app/test-acl
== Build app/test-pipeline
== Build app/test-cmdline
== Build app/test-bbdev
== Build app/test-compress-perf
== Build app/pdump
== Build app/test-crypto-perf
== Build app/test-eventdev
CC main.o
CC main.o
CC cmdline_test.o
CC commands.o
CC main.o
CC main.o
CC comp_perf_options_parse.o
CC comp_perf_test_verify.o
CC comp_perf_test_benchmark.o
CC comp_perf_test_common.o
CC evt_main.o
CC testpmd.o
CC evt_options.o
CC parameters.o
CC cmdline.o
CC evt_test.o
CC cmdline_flow.o
CC parser.o
CC main.o
CC test_bbdev.o
CC cmdline_mtr.o
CC cmdline_tm.o
CC test_order_common.o
CC test_bbdev_perf.o
CC test_bbdev_vector.o
CC test_order_queue.o
CC test_order_atq.o
CC config.o
CC iofwd.o
CC test_perf_common.o
CC test_perf_queue.o
CC macfwd.o
CC macswap.o
CC test_perf_atq.o
CC main.o
CC config.o
CC main.o
CC cperf_ops.o
LD cmdline_test
CC flowgen.o
CC commands.o
CC cperf_options_parsing.o
CC test_pipeline_common.o
CC test_pipeline_queue.o
LD testacl
LD dpdk-procinfo
CC init.o
CC runtime.o
CC pipeline_stub.o
CC pipeline_hash.o
CC pipeline_lpm.o
CC pipeline_lpm_ipv6.o
CC test.o
INSTALL-APP cmdline_test
INSTALL-MAP cmdline_test.map
CC pipeline_acl.o
CC cperf_test_vectors.o
CC cperf_test_throughput.o
CC test_pipeline_atq.o
CC cperf_test_latency.o
CC cperf_test_pmd_cyclecount.o
LD dpdk-pdump
CC cperf_test_verify.o
CC resource.o
CC test_resource.o
CC test_prefetch.o
CC test_byteorder.o
CC rxonly.o
CC txonly.o
CC cperf_test_vector_parsing.o
CC cperf_test_common.o
CC csumonly.o
CC icmpecho.o
CC test_per_lcore.o
CC test_atomic.o
CC test_barrier.o
CC test_malloc.o
CC test_cycles.o
CC test_mcslock.o
CC noisy_vnf.o
INSTALL-APP testacl
INSTALL-MAP testacl.map
CC bpf_cmd.o
CC util.o
INSTALL-APP dpdk-procinfo
INSTALL-MAP dpdk-procinfo.map
CC test_spinlock.o
CC test_ticketlock.o
CC softnicfwd.o
CC test_memory.o
CC test_memzone.o
CC test_bitmap.o
CC test_reciprocal_division.o
CC test_reciprocal_division_perf.o
CC test_fbarray.o
CC test_external_mem.o
CC test_rand_perf.o
CC test_ring.o
CC test_ring_perf.o
CC test_pmd_perf.o
CC test_table.o
CC test_table_pipeline.o
CC test_table_tables.o
CC test_table_ports.o
CC test_table_combined.o
LD testpipeline
INSTALL-APP dpdk-pdump
CC test_table_acl.o
INSTALL-MAP dpdk-pdump.map
CC test_flow_classify.o
CC test_rwlock.o
CC test_stack.o
LD dpdk-test-eventdev
CC test_stack_perf.o
CC test_timer.o
CC test_timer_perf.o
CC test_timer_racecond.o
CC test_timer_secondary.o
CC test_mempool.o
CC test_mempool_perf.o
CC test_mbuf.o
CC test_logs.o
CC test_memcpy.o
CC test_memcpy_perf.o
CC test_member.o
CC test_member_perf.o
CC test_efd.o
CC test_efd_perf.o
CC test_hash.o
CC test_thash.o
CC test_hash_perf.o
CC test_hash_functions.o
CC test_hash_multiwriter.o
CC test_hash_readwrite.o
INSTALL-APP testpipeline
CC test_hash_readwrite_lf.o
INSTALL-MAP testpipeline.map
CC test_lpm.o
CC test_lpm_perf.o
INSTALL-APP dpdk-test-eventdev
INSTALL-MAP dpdk-test-eventdev.map
CC test_lpm6.o
CC test_lpm6_perf.o
CC test_debug.o
CC test_errno.o
CC test_tailq.o
CC test_string_fns.o
CC test_cpuflags.o
CC test_mp_secondary.o
CC test_eal_flags.o
CC test_eal_fs.o
CC test_alarm.o
CC test_interrupts.o
CC test_version.o
CC test_func_reentrancy.o
CC test_service_cores.o
CC test_bitratestats.o
CC test_latencystats.o
CC test_cmdline.o
CC test_cmdline_num.o
CC test_cmdline_etheraddr.o
CC test_cmdline_portlist.o
CC test_cmdline_ipaddr.o
CC test_cmdline_cirbuf.o
CC test_cmdline_string.o
CC test_cmdline_lib.o
CC test_crc.o
CC test_red.o
CC test_sched.o
CC test_meter.o
CC test_kni.o
CC test_power.o
CC test_power_cpufreq.o
CC test_power_kvm_vm.o
CC test_common.o
CC test_distributor.o
CC test_distributor_perf.o
CC test_reorder.o
CC test_pdump.o
CC virtual_pmd.o
CC packet_burst_generator.o
CC sample_packet_forward.o
CC test_acl.o
CC test_link_bonding.o
CC test_link_bonding_mode4.o
CC test_link_bonding_rssconf.o
CC test_pmd_ring.o
LD dpdk-test-crypto-perf
CC test_pmd_ring_perf.o
CC test_cryptodev_blockcipher.o
CC test_cryptodev.o
CC test_cryptodev_asym.o
CC test_cryptodev_security_pdcp.o
CC test_metrics.o
CC test_eventdev.o
CC test_event_ring.o
CC test_event_eth_rx_adapter.o
CC test_event_eth_tx_adapter.o
CC test_event_timer_adapter.o
CC test_event_crypto_adapter.o
CC test_rawdev.o
CC test_kvargs.o
CC test_bpf.o
CC test_rcu_qsbr.o
CC test_rcu_qsbr_perf.o
CC test_ipsec.o
MKRES test_resource_c.res.o
LD dpdk-test-compress-perf
INSTALL-APP dpdk-test-crypto-perf
INSTALL-MAP dpdk-test-crypto-perf.map
LD testpmd
INSTALL-APP dpdk-test-compress-perf
INSTALL-MAP dpdk-test-compress-perf.map
INSTALL-APP testpmd
INSTALL-MAP testpmd.map
LD testbbdev
INSTALL-APP testbbdev
INSTALL-MAP testbbdev.map
LD test
INSTALL-APP test
INSTALL-MAP test.map
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
18/10/2019 06:23:12 TestVxlan: Test Case test_vxlan_ipv6_detect Result PASSED:
18/10/2019 06:23:12 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:23:15 dut.10.240.176.196: kill_all: called by dut and has no prefix list.
18/10/2019 06:23:19 dts:
TEST SUITE ENDED: TestVxlan
^ permalink raw reply [flat|nested] 3+ messages in thread