* [dts] [PATCH V1] Add flexible RXd test plan
@ 2019-11-29 2:45 Chen, Zhaoyan
2019-12-04 5:55 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Chen, Zhaoyan @ 2019-11-29 2:45 UTC (permalink / raw)
To: dts; +Cc: Chen, Zhaoyan
Add flexible RXd test plan
---
test_plans/flexible_rxd_test_plan.rst | 343 ++++++++++++++++++++++++++++++++++
1 file changed, 343 insertions(+)
create mode 100644 test_plans/flexible_rxd_test_plan.rst
diff --git a/test_plans/flexible_rxd_test_plan.rst b/test_plans/flexible_rxd_test_plan.rst
new file mode 100644
index 0000000..87f27d5
--- /dev/null
+++ b/test_plans/flexible_rxd_test_plan.rst
@@ -0,0 +1,343 @@
+.. Copyright (c) <2019> Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=======================================
+Cryptodev Performance Application Tests
+=======================================
+
+
+Description
+===========
+
+The test suite will cover the flexible RX descriptor on Intel E810
+network interface card.
+
+
+Prerequisites
+=============
+
+Copy correct ``ice.pkg`` into ``/usr/lib/firmware/intel/ice/ddp/``, \
+For the test cases, comms package is expected.
+
+Prepare test toplogoy, in the test case, it requires
+
+- 1 Intel E810 interface
+- 1 network interface for sending test packet,
+ which could be connect to the E810 interface
+- Directly connect the 2 interfaces
+
+Patch testpmd for dumping flexible fields from RXD::
+
+ diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c
+ index a1164b7..b90344d 100644
+ --- a/app/test-pmd/util.c
+ +++ b/app/test-pmd/util.c
+ @@ -10,6 +10,7 @@
+ #include <rte_ether.h>
+ #include <rte_ethdev.h>
+ #include <rte_flow.h>
+ +#include <rte_pmd_ice.h>
+
+
+ #include "testpmd.h"
+
+
+ @@ -73,6 +74,9 @@ dump_pkt_burst(uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[],
+ printf("hash=0x%x ID=0x%x ",
+ mb->hash.fdir.hash, mb->hash.fdir.id);
+ }
+ + rte_net_ice_dump_proto_xtr_metadata(mb);
+ if (ol_flags & PKT_RX_TIMESTAMP)
+ printf(" - timestamp %"PRIu64" ", mb->timestamp);
+ if (ol_flags & PKT_RX_QINQ)
+
+
+Compile DPDK and testpmd::
+
+ make install -j T=x86_64-native-linuxapp-gcc
+
+Bind Intel E810 interface to igb_uio driver, (e.g. 0000:18:00.0) ::
+
+ ./usertools/dpdk-devbind.py -b igb_uio 18:00.0
+
+
+
+Test Case 01: Check single VLAN fields in RXD (802.1Q)
+======================================================
+
+Launch testpmd by::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+ testpmd>set verbose 1
+ testpmd>set fwd io
+ testpmd>start
+
+Please change the core setting (-l option) and port's PCI (-w option) \
+by your DUT environment
+
+Send a packet with VLAN tag from test network interface::
+
+ scapy #launch scapy in shell
+
+ #In scapy interactive UI
+ p = Ether(src="3c:fd:fe:c0:e1:8c", dst="00:00:00:00:01:02", type=0x8100)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
+ sendp(p, iface='enp175s0f0', count=1)
+
+Please notice
+
+- Change ethernet source address with your test network interface's address
+- Make sure the ethernet destination addres is NOT your real E810 interface's address
+
+Check the output in testpmd, **ctag=1:0:23** is expected, which is consistent with VLAN tag set in test packet::
+
+ testpmd> port 0/queue 28: received 1 packets
+ src=3C:FD:FE:C0:E1:8C - dst=00:00:00:00:01:02 - type=0x8100 - length=60 - nb_segs=1 - RSS hash=0xf31f649c - RSS queue=0x1c - Protocol Extraction:[0x0000:0x2017],vlan,stag=0:0:0,ctag=1:0:23 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x1c
+ ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
+
+
+Test Case 02: Check single VLAN fields in RXD (802.1ad)
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x88A8)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+ stag=1:0:23
+
+
+Test Case 03: Check double VLAN fields in RXD (802.1Q) only 1 VLAN tag
+======================================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x9100)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+ stag=1:0:23
+
+
+Test Case 04: Check double VLAN fields in RXD (802.1Q) 2 VLAN tags
+==================================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x9100)/Dot1Q(prio=1,vlan=23)/Dot1Q(prio=4,vlan=56)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+ stag=1:0:23
+ ctag=4:0:56
+
+
+Test Case 05: Check double VLAN fields in RXD (802.1ad)
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x88A8)/Dot1Q(prio=1,vlan=23)/Dot1Q(prio=4,vlan=56)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+ stag=1:0:23
+ ctag=4:0:56
+
+
+Test Case 06: Check IPv4 fields in RXD
+======================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv4 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IP(tos=23,ttl=98)/UDP()/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+ ver=4
+ hdrlen=5
+ tos=23
+ ttl=98
+ proto=17
+
+
+Test Case 07: Check IPv6 fields in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv6 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+ ver=6
+ tc=12
+ flow_hi4=0x9
+ nexthdr=17
+ hoplimit=34
+
+
+Test Case 08: Check IPv6 flow field in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv6_flow -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+ ver=6
+ tc=12
+ flow=0x98765
+
+
+Test Case 09: Check TCP fields in IPv4 in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IP()/TCP(flags='AS')/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+ doff=5
+ flags=AS
+
+
+Test Case 10: Check TCP fields in IPv6 in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6()/TCP(flags='S')/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+ doff=5
+ flags=S
+
+
+Test Case 11: Check IPv4, IPv6, TCP fields in RXD on specific queues
+====================================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=64 --txq=64 --portmask=0x1
+
+Create generic flow on NIC::
+
+ flow create 0 ingress pattern eth dst is 68:05:ca:a3:13:4c / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 23 ttl is 98 / end actions queue index 2 / end
+ flow create 0 ingress pattern eth / ipv6 src is 2001::3 dst is 2001::4 tc is 8 / end actions queue index 3 / end
+ flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a9 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / tcp src is 25 dst is 23 / end actions queue index 63 / end
+
+Test packet::
+
+ p = Ether(dst="68:05:ca:a3:13:4c")/IP(src="192.168.0.1",dst="192.168.0.2",tos=23,ttl=98)/UDP()/Raw(load='XXXXXXXXXX')
+ p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6(src='2001::3', dst='2001::4', tc=8,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
+ p = Ether(dst='68:05:ca:8d:ed:a9')/IP(src='192.168.0.1', dst='192.168.0.2')/TCP(flags='AS', dport=23, sport=25)/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+ Receive queue=0x2
+ ver=4
+ hdrlen=5
+ tos=23
+ ttl=98
+ proto=17
+
+ Receive queue=0x3
+ ver=6
+ tc=12
+ flow_hi4=0x9
+ nexthdr=17
+ hoplimit=34
+
+ Receive queue=0x3f
+ doff=5
+ flags=AS
\ No newline at end of file
--
2.13.0.windows.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH V1] Add flexible RXd test plan
2019-11-29 2:45 [dts] [PATCH V1] Add flexible RXd test plan Chen, Zhaoyan
@ 2019-12-04 5:55 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-12-04 5:55 UTC (permalink / raw)
To: Chen, Zhaoyan, dts; +Cc: Chen, Zhaoyan
Some minus warning, could you please fix them, thanks
.git/rebase-apply/patch:52: trailing whitespace.
The test suite will cover the flexible RX descriptor on Intel E810
.git/rebase-apply/patch:80: trailing whitespace.
.git/rebase-apply/patch:81: trailing whitespace.
.git/rebase-apply/patch:83: trailing whitespace.
.git/rebase-apply/patch:84: trailing whitespace.
warning: squelched 5 whitespace errors
warning: 10 lines add whitespace errors.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Chen, Zhaoyan
> Sent: Friday, November 29, 2019 10:45 AM
> To: dts@dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>
> Subject: [dts] [PATCH V1] Add flexible RXd test plan
>
> Add flexible RXd test plan
>
> ---
> test_plans/flexible_rxd_test_plan.rst | 343
> ++++++++++++++++++++++++++++++++++
> 1 file changed, 343 insertions(+)
> create mode 100644 test_plans/flexible_rxd_test_plan.rst
>
> diff --git a/test_plans/flexible_rxd_test_plan.rst
> b/test_plans/flexible_rxd_test_plan.rst
> new file mode 100644
> index 0000000..87f27d5
> --- /dev/null
> +++ b/test_plans/flexible_rxd_test_plan.rst
> @@ -0,0 +1,343 @@
> +.. Copyright (c) <2019> Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=======================================
> +Cryptodev Performance Application Tests
> +=======================================
> +
> +
> +Description
> +===========
> +
> +The test suite will cover the flexible RX descriptor on Intel E810
> +network interface card.
> +
> +
> +Prerequisites
> +=============
> +
> +Copy correct ``ice.pkg`` into ``/usr/lib/firmware/intel/ice/ddp/``, \
> +For the test cases, comms package is expected.
> +
> +Prepare test toplogoy, in the test case, it requires
> +
> +- 1 Intel E810 interface
> +- 1 network interface for sending test packet,
> + which could be connect to the E810 interface
> +- Directly connect the 2 interfaces
> +
> +Patch testpmd for dumping flexible fields from RXD::
> +
> + diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c index
> + a1164b7..b90344d 100644
> + --- a/app/test-pmd/util.c
> + +++ b/app/test-pmd/util.c
> + @@ -10,6 +10,7 @@
> + #include <rte_ether.h>
> + #include <rte_ethdev.h>
> + #include <rte_flow.h>
> + +#include <rte_pmd_ice.h>
> +
> +
> + #include "testpmd.h"
> +
> +
> + @@ -73,6 +74,9 @@ dump_pkt_burst(uint16_t port_id, uint16_t queue,
> struct rte_mbuf *pkts[],
> + printf("hash=0x%x ID=0x%x ",
> + mb->hash.fdir.hash, mb->hash.fdir.id);
> + }
> + + rte_net_ice_dump_proto_xtr_metadata(mb);
> + if (ol_flags & PKT_RX_TIMESTAMP)
> + printf(" - timestamp %"PRIu64" ", mb->timestamp);
> + if (ol_flags & PKT_RX_QINQ)
> +
> +
> +Compile DPDK and testpmd::
> +
> + make install -j T=x86_64-native-linuxapp-gcc
> +
> +Bind Intel E810 interface to igb_uio driver, (e.g. 0000:18:00.0) ::
> +
> + ./usertools/dpdk-devbind.py -b igb_uio 18:00.0
> +
> +
> +
> +Test Case 01: Check single VLAN fields in RXD (802.1Q)
> +======================================================
> +
> +Launch testpmd by::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> + testpmd>set verbose 1
> + testpmd>set fwd io
> + testpmd>start
> +
> +Please change the core setting (-l option) and port's PCI (-w option) \
> +by your DUT environment
> +
> +Send a packet with VLAN tag from test network interface::
> +
> + scapy #launch scapy in shell
> +
> + #In scapy interactive UI
> + p = Ether(src="3c:fd:fe:c0:e1:8c", dst="00:00:00:00:01:02",
> + type=0x8100)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
> + sendp(p, iface='enp175s0f0', count=1)
> +
> +Please notice
> +
> +- Change ethernet source address with your test network interface's
> +address
> +- Make sure the ethernet destination addres is NOT your real E810
> +interface's address
> +
> +Check the output in testpmd, **ctag=1:0:23** is expected, which is
> consistent with VLAN tag set in test packet::
> +
> + testpmd> port 0/queue 28: received 1 packets src=3C:FD:FE:C0:E1:8C -
> + dst=00:00:00:00:01:02 - type=0x8100 - length=60 - nb_segs=1 - RSS
> + hash=0xf31f649c - RSS queue=0x1c - Protocol
> + Extraction:[0x0000:0x2017],vlan,stag=0:0:0,ctag=1:0:23 - hw ptype:
> + L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> L3_IPV4
> + L4_UDP - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x1c
> + ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD
> PKT_RX_IP_CKSUM_GOOD
> + PKT_RX_OUTER_L4_CKSUM_UNKNOWN
> +
> +
> +Test Case 02: Check single VLAN fields in RXD (802.1ad)
> +=======================================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c',
> + type=0x88A8)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
> +
> +Expected output in testpmd::
> +
> + stag=1:0:23
> +
> +
> +Test Case 03: Check double VLAN fields in RXD (802.1Q) only 1 VLAN tag
> +===============================================================
> =======
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c',
> + type=0x9100)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
> +
> +Expected output in testpmd::
> +
> + stag=1:0:23
> +
> +
> +Test Case 04: Check double VLAN fields in RXD (802.1Q) 2 VLAN tags
> +===============================================================
> ===
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c',
> +
> type=0x9100)/Dot1Q(prio=1,vlan=23)/Dot1Q(prio=4,vlan=56)/IP()/UDP()/DN
> + S()
> +
> +Expected output in testpmd::
> +
> + stag=1:0:23
> + ctag=4:0:56
> +
> +
> +Test Case 05: Check double VLAN fields in RXD (802.1ad)
> +=======================================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c',
> +
> type=0x88A8)/Dot1Q(prio=1,vlan=23)/Dot1Q(prio=4,vlan=56)/IP()/UDP()/DN
> + S()
> +
> +Expected output in testpmd::
> +
> + stag=1:0:23
> + ctag=4:0:56
> +
> +
> +Test Case 06: Check IPv4 fields in RXD
> +======================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=ipv4 -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78',
> + dst='68:05:ca:a3:13:4c')/IP(tos=23,ttl=98)/UDP()/Raw(load='XXXXXXXXXX'
> + )
> +
> +Expected output in testpmd::
> +
> + ver=4
> + hdrlen=5
> + tos=23
> + ttl=98
> + proto=17
> +
> +
> +Test Case 07: Check IPv6 fields in RXD
> +=======================================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=ipv6 -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78',
> + dst='68:05:ca:a3:13:4c')/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw(load
> + ='XXXXXXXXXX')
> +
> +Expected output in testpmd::
> +
> + ver=6
> + tc=12
> + flow_hi4=0x9
> + nexthdr=17
> + hoplimit=34
> +
> +
> +Test Case 08: Check IPv6 flow field in RXD
> +=======================================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=ipv6_flow -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78',
> + dst='68:05:ca:a3:13:4c')/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw(load
> + ='XXXXXXXXXX')
> +
> +Expected output in testpmd::
> +
> + ver=6
> + tc=12
> + flow=0x98765
> +
> +
> +Test Case 09: Check TCP fields in IPv4 in RXD
> +=======================================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78',
> + dst='68:05:ca:a3:13:4c')/IP()/TCP(flags='AS')/Raw(load='XXXXXXXXXX')
> +
> +Expected output in testpmd::
> +
> + doff=5
> + flags=AS
> +
> +
> +Test Case 10: Check TCP fields in IPv6 in RXD
> +=======================================================
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1
> + --nb-cores=2
> +
> +Test packet::
> +
> + p = Ether(src='3c:fd:fe:bc:f6:78',
> + dst='68:05:ca:a3:13:4c')/IPv6()/TCP(flags='S')/Raw(load='XXXXXXXXXX')
> +
> +Expected output in testpmd::
> +
> + doff=5
> + flags=S
> +
> +
> +Test Case 11: Check IPv4, IPv6, TCP fields in RXD on specific queues
> +===============================================================
> =====
> +
> +Test steps are same to ``Test Case 01``, just change the launch command
> +of testpmd, test packet and expected output
> +
> +Launch testpmd command::
> +
> + ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w
> + 18:00.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=64
> + --txq=64 --portmask=0x1
> +
> +Create generic flow on NIC::
> +
> + flow create 0 ingress pattern eth dst is 68:05:ca:a3:13:4c / ipv4 src
> + is 192.168.0.1 dst is 192.168.0.2 tos is 23 ttl is 98 / end actions
> + queue index 2 / end flow create 0 ingress pattern eth / ipv6 src is
> + 2001::3 dst is 2001::4 tc is 8 / end actions queue index 3 / end flow
> + create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a9 / ipv4 src is
> + 192.168.0.1 dst is 192.168.0.2 / tcp src is 25 dst is 23 / end actions
> + queue index 63 / end
> +
> +Test packet::
> +
> + p =
> + Ether(dst="68:05:ca:a3:13:4c")/IP(src="192.168.0.1",dst="192.168.0.2",
> + tos=23,ttl=98)/UDP()/Raw(load='XXXXXXXXXX')
> + p = Ether(src='3c:fd:fe:bc:f6:78',
> + dst='68:05:ca:a3:13:4c')/IPv6(src='2001::3', dst='2001::4',
> + tc=8,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
> + p = Ether(dst='68:05:ca:8d:ed:a9')/IP(src='192.168.0.1',
> + dst='192.168.0.2')/TCP(flags='AS', dport=23,
> + sport=25)/Raw(load='XXXXXXXXXX')
> +
> +Expected output in testpmd::
> +
> + Receive queue=0x2
> + ver=4
> + hdrlen=5
> + tos=23
> + ttl=98
> + proto=17
> +
> + Receive queue=0x3
> + ver=6
> + tc=12
> + flow_hi4=0x9
> + nexthdr=17
> + hoplimit=34
> +
> + Receive queue=0x3f
> + doff=5
> + flags=AS
> \ No newline at end of file
> --
> 2.13.0.windows.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-04 5:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-29 2:45 [dts] [PATCH V1] Add flexible RXd test plan Chen, Zhaoyan
2019-12-04 5:55 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).