Re: [dts] [PATCH v1] test_plans: add or remove mac address for VF

["Tu, Lijuan" <lijuan.tu@intel.com>]

DTS already have test plan similar as this, if not enough, please enhance them based on the old one.

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Guinan Sun
> Sent: Wednesday, December 4, 2019 1:28 AM
> To: dts@dpdk.org
> Cc: Sun, GuinanX <guinanx.sun@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add or remove mac address for VF
> 
> Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
> ---
>  ...vf_add_or_remove_mac_address_test_plan.rst | 174
> ++++++++++++++++++
>  1 file changed, 174 insertions(+)
>  create mode 100644
> test_plans/vf_add_or_remove_mac_address_test_plan.rst
> 
> diff --git a/test_plans/vf_add_or_remove_mac_address_test_plan.rst
> b/test_plans/vf_add_or_remove_mac_address_test_plan.rst
> new file mode 100644
> index 0000000..3d08a54
> --- /dev/null
> +++ b/test_plans/vf_add_or_remove_mac_address_test_plan.rst
> @@ -0,0 +1,174 @@
> +.. Copyright (c) <2018>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=======================================
> +Niantic Add or Remove Mac Address Tests
> +=======================================
> +
> +This document provides test plan for testing whether the "mac address
> add/remove"
> +command works properly. ixgbe PMD PF host code need to support "mac
> address add/remove"
> +function, PF hsot need to add handle process for IXGBE_VF_SET_MACVLAN
> +message, VF will be able to add new MAC address for itself too.
> +
> +Prerequisites
> +=============
> +
> +1. Hardware:
> +
> +1)linkage and NIC info::
> +
> +              04:00.1  04:00.0
> +-----------------------------------
> +| NIC 82599   port1     port0     |
> +--------------(dpdk) (kernel)------
> +               |        |
> +               +--------+
> +
> +port0 (kernel)----(04:00.0)
> +90:E2:BA:30:A1:6C(04:00.0 ens2f0)
> +
> +port1 PF (04:00.1 dpdk)
> +90:E2:BA:30:A1:6D
> +
> +port1 VF----(04:10.1 dpdk)
> +02:9C:E2:71:A4:1A
> +
> +use new mac address to test::
> +02:9C:E2:71:A4:1B
> +02:9C:E2:71:A4:1C
> +02:9C:E2:71:A4:1D
> +
> +2)Test Setup
> +bind port1 to dpdk::
> +	dpdkcode#./usertools/dpdk-devbind.py -b igb_uio 04:00.1
> +
> +create VF of port1::
> +	#echo 1 > /sys/bus/pci/devices/0000\:04\:00.1/max_VFs
> +
> +bind port1VF to dpdk::
> +	dpdkcode#./usertools/dpdk-devbind.py -b igb_uio 04:10.1
> +
> +ensure port0 Active
> +
> +2. Software:
> +
> +   * dpdk: http://dpdk.org/git/dpdk
> +   * scapy: http://www.secdev.org/projects/scapy/
> +
> +3. Added command::
> +
> +	  testpmd> mac_addr add (port_id) (mac_addr)
> +	  " Add MACsec. "
> +	  testpmd> mac_addr remove (port_id) (mac_addr)
> +	  " Remove MACsec. "
> +
> +Test Case : add/remove single mac address
> +=========================================
> +Run testpmd
> +
> +	start PF testpmd(terminal1)::
> +		./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -w
> 04:00.1
> +--file-prefix=PF -- -i
> +
> +	start VF testpmd(terminal2)::
> +		./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -w
> 04:10.1 --file-prefix=VF -- -i
> +		testpmd> set verbose 1
> +		testpmd> set promisc all off
> +		testpmd> start
> +
> +1. send packets to VF(default mac address)::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1A")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +2. add mac address::
> +	VF testpmd>mac_addr add 0 02:9C:E2:71:A4:1B
> +
> +3. send packets to added mac address of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1B")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +4. send packets to illegal mac address of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1E")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can't be received.
> +
> +5. send packets to VF(default mac address)::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1A")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +6. remove mac address::
> +	VF testpmd>mac_addr remove 0 02:9C:E2:71:A4:1B
> +
> +7. send packets to removed mac address of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1B")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can't be received.
> +
> +8. send packets to VF(default mac address)::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1A")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +Test Case : add/remove multiple mac address
> +===========================================
> +9. add multiple mac address::
> +	VF testpmd> mac_addr add 0 02:9C:E2:71:A4:1B
> +	VF testpmd> mac_addr add 0 02:9C:E2:71:A4:1C
> +	VF testpmd> mac_addr add 0 02:9C:E2:71:A4:1D
> +
> +10. send packets to multiple mac address of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1B")/"
> Hello!0",iface="ens2f0",count=100)
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1C")/"
> Hello!0",iface="ens2f0",count=100)
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1D")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +11.	send packets to illegal mac addr of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1E")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can't be received.
> +
> +12. remove multiple mac address::
> +	VF testpmd> mac_addr remove 0 02:9C:E2:71:A4:1B
> +	VF testpmd> mac_addr remove 0 02:9C:E2:71:A4:1C
> +
> +13. send packets to removed mac address of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1B")/"
> Hello!0",iface="ens2f0",count=100)
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1C")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can't be received.
> +
> +14. send packets to unremoved mac address of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1D")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +15. send packets to VF(default mac address)::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1A")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can be received.
> +
> +16.	send packets to illegal mac addr of port1VF::
> +
> 	>>>sendp(Ether(src="90:E2:BA:30:A1:6C",dst="02:9C:E2:71:A4:1E")/"
> Hello!0",iface="ens2f0",count=100)
> +	Check that packets can't be received.
> +
> --
> 2.17.1