Re: [dts] [PATCH V1 1/4] conf/crbs: add param which can config the dpdk tar side

["Tu, Lijuan" <lijuan.tu@intel.com>]

Applied the series, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Friday, December 27, 2019 8:03 AM
> To: dts@dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts] [PATCH V1 1/4] conf/crbs: add param which can config the
> dpdk tar side
> 
> the params snapshot_load_side can config 'tester' or 'dut', when
> snapshot_load_side=tester, it will copy dpdk.tar.gz from tester, when
> snapshot_load_side=dut, it will copy dpdk.tar.gz from dut.
> the dpdk.tar.gz default on tester, and default path is dts/dep, if config
> snapshot_load_side=dut, should use --snapshot to specify a absolute path of
> dpdk.tar.gz on dut when start dts.
> 
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
>  conf/crbs.cfg | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/conf/crbs.cfg b/conf/crbs.cfg index 5209555..2e6c948 100644
> --- a/conf/crbs.cfg
> +++ b/conf/crbs.cfg
> @@ -11,6 +11,9 @@
>  #  channels: Board channel number
>  #  bypass_core0: Whether by pass core0
>  #  dut_cores: DUT core list, eg: 1,2,3,4,5,18-22
> +#  snapshot_load_side: tester/dut, specify the dpdk.tar.gz on side
> +#       if value is dut, should combine the params --snapshot to use.
> +#       eg: ./dts --snapshot /root/tester/dpdk.tar.gz
>  [DUT IP1]
>  dut_ip=xxx.xxx.xxx.xxx
>  dut_user=root
> @@ -24,6 +27,7 @@ pktgen_group=
>  channels=4
>  bypass_core0=True
>  dut_cores=
> +snapshot_load_side=tester
>  [DUT IP2]
>  dut_ip=yyy.yyy.yyy.yyy
>  dut_user=root
> @@ -36,4 +40,5 @@ ixia_group=
>  pktgen_group=
>  channels=4
>  bypass_core0=True
> -dut_cores=
> \ No newline at end of file
> +dut_cores=
> +snapshot_load_side=tester
> --
> 2.7.4