* [dts] [PATCH v1] test_plans: add packed virtqueue test with loopback virtio-user cases
@ 2019-12-29 17:22 Yinan
2020-01-02 3:30 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-12-29 17:22 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Add packed virtqueue server mode in loopback_virtio_user_packed_ring_server_mode_test_plan.rst
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...user_packed_ring_server_mode_test_plan.rst | 348 ++++++++++++++++++
1 file changed, 348 insertions(+)
create mode 100644 test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
diff --git a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
new file mode 100644
index 0000000..ec9230d
--- /dev/null
+++ b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
@@ -0,0 +1,348 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOgit T LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+Packed ring loopback server mode test plan
+==========================================
+
+Virtio-user server mode is a feature to enable virtio-user as the server, vhost as the client, thus after vhost-user is killed then relaunched,
+virtio-user can reconnect back to vhost-user again; at another hand, virtio-user also can reconnect back to vhost-user after virtio-user is killed.This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes virtio 1.0 mergeable, normal, vector_rx, inorder no-mergeable, inorder mergeable path and virtio 1.1 mergeable, non-mergeable, inorder mergeable and inorder non-mergeable path.
+
+
+Test Case 1: Basic test for virtio-user server mode, launch virtio-user first
+=============================================================================
+
+1. Launch virtio-user as server mode::
+
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa
+ >set fwd mac
+ >start
+
+2. Launch vhost as client mode::
+
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1
+ >set fwd mac
+ >start tx_first 32
+
+3. Run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd>show port stats all
+
+Test Case 2: loopback reconnect test with virtio 1.1 mergeable path and server mode
+===================================================================================
+
+1. launch vhost as client mode with 2 queues::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+2. Launch virtio-user as server mode with 2 queues::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+3. Quit vhost side testpmd, check the virtio-user side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+4. Relaunch vhost and send packets::
+
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+6. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+7. Quit virtio-user side testpmd, check the vhost side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+8. Relaunch virtio-user and send packets::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+10. Port restart at vhost side by below command and re-calculate the average throughput::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+11. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+Test Case 3: loopback reconnect test with virtio 1.1 non-mergeable path and server mode
+=======================================================================================
+
+1. launch vhost as client mode with 2 queues::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+2. Launch virtio-user as server mode with 2 queues::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+3. Quit vhost side testpmd, check the virtio-user side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+4. Relaunch vhost and send packets::
+
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+6. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+7. Quit virtio-user side testpmd, check the vhost side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+8. Relaunch virtio-user and send packets::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+10. Port restart at vhost side by below command and re-calculate the average throughput::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+11. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+Test Case 4: loopback reconnect test with virtio 1.1 inorder mergeable path and server mode
+===========================================================================================
+
+1. launch vhost as client mode with 2 queues::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+2. Launch virtio-user as server mode with 2 queues::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+3. Quit vhost side testpmd, check the virtio-user side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+4. Relaunch vhost and send packets::
+
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+6. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+7. Quit virtio-user side testpmd, check the vhost side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+8. Relaunch virtio-user and send packets::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+10. Port restart at vhost side by below command and re-calculate the average throughput::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+11. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+Test Case 5: loopback reconnect test with virtio 1.1 inorder non-mergeable path and server mode
+===============================================================================================
+
+1. launch vhost as client mode with 2 queues::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+2. Launch virtio-user as server mode with 2 queues::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+3. Quit vhost side testpmd, check the virtio-user side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+4. Relaunch vhost and send packets::
+
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+6. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+7. Quit virtio-user side testpmd, check the vhost side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+8. Relaunch virtio-user and send packets::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+10. Port restart at vhost side by below command and re-calculate the average throughput::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+11. Check each RX/TX queue has packets::
+
+ testpmd>stop
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans: add packed virtqueue test with loopback virtio-user cases
2019-12-29 17:22 [dts] [PATCH v1] test_plans: add packed virtqueue test with loopback virtio-user cases Yinan
@ 2020-01-02 3:30 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-01-02 3:30 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
applied
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, December 30, 2019 1:23 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add packed virtqueue test with loopback
> virtio-user cases
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Add packed virtqueue server mode in
> loopback_virtio_user_packed_ring_server_mode_test_plan.rst
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...user_packed_ring_server_mode_test_plan.rst | 348 ++++++++++++++++++
> 1 file changed, 348 insertions(+)
> create mode 100644
> test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
>
> diff --git
> a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
> b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst
> new file mode 100644
> index 0000000..ec9230d
> --- /dev/null
> +++ b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.
> +++ rst
> @@ -0,0 +1,348 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOgit T LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==========================================
> +Packed ring loopback server mode test plan
> +==========================================
> +
> +Virtio-user server mode is a feature to enable virtio-user as the
> +server, vhost as the client, thus after vhost-user is killed then relaunched,
> virtio-user can reconnect back to vhost-user again; at another hand, virtio-
> user also can reconnect back to vhost-user after virtio-user is killed.This
> feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1,
> includes virtio 1.0 mergeable, normal, vector_rx, inorder no-mergeable,
> inorder mergeable path and virtio 1.1 mergeable, non-mergeable, inorder
> mergeable and inorder non-mergeable path.
> +
> +
> +Test Case 1: Basic test for virtio-user server mode, launch virtio-user
> +first
> +===============================================================
> ========
> +======
> +
> +1. Launch virtio-user as server mode::
> +
> + ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa
> + >set fwd mac
> + >start
> +
> +2. Launch vhost as client mode::
> +
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --
> txq=1 --nb-cores=1
> + >set fwd mac
> + >start tx_first 32
> +
> +3. Run below command to get throughput,verify the loopback throughput is
> not zero::
> +
> + testpmd>show port stats all
> +
> +Test Case 2: loopback reconnect test with virtio 1.1 mergeable path and
> +server mode
> +===============================================================
> ========
> +============
> +
> +1. launch vhost as client mode with 2 queues::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start
> +
> +2. Launch virtio-user as server mode with 2 queues::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +3. Quit vhost side testpmd, check the virtio-user side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +4. Relaunch vhost and send packets::
> +
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +6. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +7. Quit virtio-user side testpmd, check the vhost side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +8. Relaunch virtio-user and send packets::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> +
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +11. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +Test Case 3: loopback reconnect test with virtio 1.1 non-mergeable path
> +and server mode
> +===============================================================
> ========
> +================
> +
> +1. launch vhost as client mode with 2 queues::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start
> +
> +2. Launch virtio-user as server mode with 2 queues::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +3. Quit vhost side testpmd, check the virtio-user side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +4. Relaunch vhost and send packets::
> +
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +6. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +7. Quit virtio-user side testpmd, check the vhost side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +8. Relaunch virtio-user and send packets::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> +
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +11. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +Test Case 4: loopback reconnect test with virtio 1.1 inorder mergeable
> +path and server mode
> +===============================================================
> ========
> +====================
> +
> +1. launch vhost as client mode with 2 queues::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start
> +
> +2. Launch virtio-user as server mode with 2 queues::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +3. Quit vhost side testpmd, check the virtio-user side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +4. Relaunch vhost and send packets::
> +
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +6. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +7. Quit virtio-user side testpmd, check the vhost side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +8. Relaunch virtio-user and send packets::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> +
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +11. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +Test Case 5: loopback reconnect test with virtio 1.1 inorder
> +non-mergeable path and server mode
> +===============================================================
> ========
> +========================
> +
> +1. launch vhost as client mode with 2 queues::
> +
> + rm -rf vhost-net*
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start
> +
> +2. Launch virtio-user as server mode with 2 queues::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +3. Quit vhost side testpmd, check the virtio-user side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +4. Relaunch vhost and send packets::
> +
> + ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --
> file-prefix=vhost \
> + --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --
> rxq=2 --txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +5. Check the virtio-user side link status and run below command to get
> throughput,verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +6. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> +
> +7. Quit virtio-user side testpmd, check the vhost side link status::
> +
> + testpmd> show port info 0
> + #it should show "down"
> +
> +8. Relaunch virtio-user and send packets::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> + >set fwd mac
> + >start tx_first 32
> +
> +9. Check the vhost side link status and run below command to get
> throughput, verify the loopback throughput is not zero::
> +
> + testpmd> show port info 0
> + #it should show up"
> + testpmd>show port stats all
> +
> +10. Port restart at vhost side by below command and re-calculate the
> average throughput::
> +
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +11. Check each RX/TX queue has packets::
> +
> + testpmd>stop
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-02 3:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-29 17:22 [dts] [PATCH v1] test_plans: add packed virtqueue test with loopback virtio-user cases Yinan
2020-01-02 3:30 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).