Re: [dts] [PATCH V1] tests/: add test script for rte flow priority

["Tu, Lijuan" <lijuan.tu@intel.com>]

applied

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of qifu
> Sent: Friday, January 3, 2020 12:04 AM
> To: dts@dpdk.org
> Cc: Fu, Qi <qi.fu@intel.com>
> Subject: [dts] [PATCH V1] tests/: add test script for rte flow priority
> 
> add test script for rte flow priority
> 
> Signed-off-by: qifu <qi.fu@intel.com>
> ---
>  tests/TestSuite_rteflow_priority.py | 373 ++++++++++++++++++++++++++++
>  1 file changed, 373 insertions(+)
>  create mode 100644 tests/TestSuite_rteflow_priority.py
> 
> diff --git a/tests/TestSuite_rteflow_priority.py
> b/tests/TestSuite_rteflow_priority.py
> new file mode 100644
> index 0000000..dbea334
> --- /dev/null
> +++ b/tests/TestSuite_rteflow_priority.py
> @@ -0,0 +1,373 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2019 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +#   * Redistributions of source code must retain the above copyright
> +#     notice, this list of conditions and the following disclaimer.
> +#   * Redistributions in binary form must reproduce the above copyright
> +#     notice, this list of conditions and the following disclaimer in
> +#     the documentation and/or other materials provided with the
> +#     distribution.
> +#   * Neither the name of Intel Corporation nor the names of its
> +#     contributors may be used to endorse or promote products derived
> +#     from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Test rte_flow priority
> +"""
> +
> +import re
> +import time
> +import string
> +from time import sleep
> +from scapy.utils import struct, socket, PcapWriter
> +
> +import utils
> +from etgen import IxiaPacketGenerator
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from pmd_output import PmdOutput
> +import sys
> +reload(sys)
> +sys.setdefaultencoding('utf8')
> +
> +
> +class TestRteflowPriority(TestCase):
> +
> +    def set_up_all(self):
> +        """
> +        Run at the start of each test suite.
> +
> +        PMD prerequisites.
> +        """
> +        self.dut_ports = self.dut.get_ports(self.nic)
> +        localPort = self.tester.get_local_port(self.dut_ports[0])
> +        self.__tx_iface = self.tester.get_interface(localPort)
> +        cores = self.dut.get_core_list("1S/5C/1T")
> +        self.coreMask = utils.create_mask(cores)
> +        self.portMask = utils.create_mask([self.dut_ports[0]])
> +
> +    def set_up(self):
> +        """
> +        Run before each test case.
> +        """
> +        pass
> +    #
> +    # Utility methods and other non-test code.
> +    #
> +
> ################################################################
> ###########
> +    scapyCmds = []
> +
> +    def check_link(self):
> +        # check status in test case, dut and tester both should be up.
> +        self.pmd_output = PmdOutput(self.dut)
> +        res = self.pmd_output.wait_link_status_up('all', timeout=30)
> +        if res is True:
> +            for i in range(15):
> +                out = self.tester.get_port_status(self.dut_ports[0])
> +                if out == 'up':
> +                    break
> +                else:
> +                    time.sleep(1)
> +            return True
> +        else:
> +            return False
> +
> +    def send_pkt(self, cmd):
> +        """
> +        Send packages and verify behavior.
> +        """
> +        self.tester.scapyCmds.append(cmd)
> +        self.tester.scapy_execute()
> +
> +    def get_packet_number(self, out, match_string):
> +        """
> +        get the rx packets number.
> +        """
> +
> +        out_lines=out.splitlines()
> +        pkt_num=0
> +        for i in range(len(out_lines)):
> +            if match_string in out_lines[i]:
> +                result_scanner=(r'RX-packets:\s?(\d+)')
> +                scanner=re.compile(result_scanner,re.DOTALL)
> +                m=scanner.search(out_lines[i+1])
> +                pkt_num=int(m.group(1))
> +                break
> +        return pkt_num
> +
> +    def check_queue_rx_packets_number(self, out, queue_id):
> +        """
> +        check the queue rx packets number.
> +        """
> +        match_string="------- Forward Stats for RX Port= 0/Queue= %d" %
> queue_id
> +        pkt_num=self.get_packet_number(out, match_string)
> +        return pkt_num
> +    #
> +    # test cases.
> +    #
> +
> +
> ################################################################
> ######
> + #####
> +
> +    def test_priority_in_pipeline_mode(self):
> +        """
> +        priority is active in pipeline mode.
> +        """
> +        #start testpmd in pipeline mode
> +        # genarate eal
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=1 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        self.dut.send_expect("set fwd rxonly", "testpmd> ", 15)
> +        self.dut.send_expect("set verbose 1", "testpmd> ", 15)
> +        self.dut.send_expect("rx_vxlan_port add 4789 0", "testpmd> ",
> + 15)
> +
> +        #create fdir and switch rules with different priority
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end
> actions queue index 1 / end ", "testpmd>", 15)
> +        self.verify("Successed" and "(2)" in out, "failed: rule map to wrong
> filter")
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 / udp / vxlan / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 /
> udp src is 25 dst is 23 / end actions queue index 2 / end ", "testpmd>", 15)
> +        self.verify("Successed" and "(2)" in out, "failed: rule map to wrong
> filter")
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 src is 192.168.0.4 dst is 192.168.0.7 tos is 4 ttl is 20 / tcp src is 25 dst is 23
> / end actions queue index 3 / end ", "testpmd>", 15)
> +        self.verify("Successed" and "(1)" in out, "failed: rule map to wrong
> filter")
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 / udp / vxlan / eth / ipv4 src is 192.168.0.4 dst is 192.168.0.7 / udp src is
> 25 dst is 23 / end actions queue index 4 / end ", "testpmd>", 15)
> +        self.verify("Successed" and "(1)" in out, "failed: rule map to wrong
> filter")
> +        out = self.dut.send_expect("flow list 0", "testpmd> ", 15)
> +        self.logger.info(out)
> +        self.verify( "3" in out, "failed: flow rules created error")
> +
> +        #send pkts and check the rules are written to different filter tables and
> the rules can work
> +        self.dut.send_expect("start", "testpmd>", 20)
> +        a=self.check_link()
> +        self.verify(a, "failed: link can not up")
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:66"
> )/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Ra
> w("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 1)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 1')
> +
> +        self.dut.send_expect("start", "testpmd>", 20)
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:66"
> )/IP()/UDP()/VXLAN()/Ether()/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/
> UDP(sport=25,dport=23)/Raw("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 2)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 2')
> +
> +        self.dut.send_expect("start", "testpmd>", 20)
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:66"
> )/IP(src="192.168.0.4",dst="192.168.0.7",tos=4,ttl=20)/TCP(sport=25,dport=2
> 3)/Raw("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 3)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 3')
> +
> +        self.dut.send_expect("start", "testpmd>", 20)
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:66"
> )/IP()/UDP()/VXLAN()/Ether()/IP(src="192.168.0.4
> ",dst="192.168.0.7")/UDP(sport=25,dport=23)/Raw("x"*80)],iface="%s")'%(s
> elf.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 4)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 4')
> +
> +        #create rules without priority, only the pattern supported by switch can
> be created.
> +        out= self.dut.send_expect("flow create 0 ingress pattern eth / ipv4 src
> is 192.168.1.2 dst is 192.168.0.3 tos is 5 / tcp src is 25 dst is 23 / end actions
> queue index 1 / end ", "testpmd>", 15)
> +        self.verify( "Failed" not in out, "failed: default priority 0 is not work")
> +        out=self.dut.send_expect("flow create 0 ingress pattern eth / ipv4 src is
> 192.168.0.2 dst is 192.168.0.3 tos is 4 ttl is 20 / sctp src is 25 dst is 23 / end
> actions queue index 1 / end ", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: pattern only support by
> + fdir can not be created in default priority")
> +
> +        self.dut.send_expect("flow flush 0", "testpmd>", 20)
> +        self.dut.send_expect("quit", "#", 50)
> +
> +    def test_priority_in_nonpipeline_mode(self):
> +        """
> +        priority is not active in pipeline mode.
> +        """
> +
> +        #start testpmd without pipeline-mode-support parameter, check the
> testpmd is launch in non-pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s --log-level="ice,7" -- -i -
> -portmask=%s --rxq=10 --txq=10' % (self.target, self.coreMask,
> self.dut.ports_info[0]['pci'], utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 /
> end", "testpmd>", 15)
> +        self.verify( "Successed" and "(1)" in out, "failed: rule can't be created to
> fdir")
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 /
> end", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: default value of priority is 0 in non-
> pipeline mode")
> +        self.dut.send_expect("flow flush 0", "testpmd>", 20)
> +        self.dut.send_expect("quit", "#", 50)
> +
> +        #restart testpmd with pipeline-mode-support=0, check the testpmd is
> launch in non-pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=0 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 /
> end", "testpmd>", 15)
> +        self.verify( "Successed" and "(1)" in out, "failed: rule can't be created to
> fdir")
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end actions queue index 2 /
> end", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: default value of priority is 0 in non-
> pipeline mode")
> +        self.dut.send_expect("flow flush 0", "testpmd>", 20)
> +        self.dut.send_expect("quit", "#", 50)
> +
> +    def test_no_destination_high_prority(self):
> +        """
> +        no destination high priority rule is not acceptable.
> +        """
> +
> +        #start testpmd in pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=1 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        #create no destination high priority rules, check the rules can not be
> created.
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end
> actions / end", "testpmd>", 15)
> +        self.verify( "Bad argument" in out, "failed: no destination high priority
> rule is not acceptable")
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end",
> "testpmd>", 15)
> +        self.verify( "Bad argument" in out, "failed: no destination high priority
> rule is not acceptable")
> +        self.dut.send_expect("quit", "#", 50)
> +
> +    def test_create_fdir_rule_with_priority_0(self):
> +        """
> +        create a rule only supported by fdir filter with priority 0 is not
> acceptable.
> +        """
> +
> +        #start testpmd in pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=1 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        #create rules only supported by fdir with priority 0, check the rules can
> not be created.
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 dst is
> 1111:2222:3333:4444:5555:6666:7777:9999 / sctp src is 25 dst is 23 / end
> actions queue index 1 / end", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: priority is not work")
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 ttl is 20 / sctp src is 25 dst is
> 23 / end actions queue index 1 / end", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: priority is not work")
> +        self.dut.send_expect("quit", "#", 50)
> +
> +    def test_create_switch_rule_with_priority_1(self):
> +        """
> +        create a rule only supported by switch filter with priority 1 is not
> acceptable.
> +        """
> +
> +        #start testpmd in pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=1 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        #create rules only supported by switch with priority 1, check the rules
> can not be created.
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 / nvgre / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / end
> actions queue index 3 / end", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: priority is not work")
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 / nvgre / eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / udp src
> is 25 dst is 23 / end actions queue index 3 / end", "testpmd>", 15)
> +        self.verify( "Failed" in out, "failed: priority is not work")
> +        self.dut.send_expect("quit", "#", 50)
> +
> +    def test_rules_with_same_parameters_different_action(self):
> +        """
> +        it's acceptable to create same rules with different filter in pipeline
> mode.
> +        """
> +
> +        #start testpmd in pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=1 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +
> +        self.dut.send_expect("set fwd rxonly", "testpmd> ", 15)
> +        self.dut.send_expect("set verbose 1", "testpmd> ", 15)
> +
> +
> +        #create rules with same parameters but different action
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end
> actions queue index 1 / end", "testpmd>", 15)
> +        self.verify( "Successed" and "(2)" in out, "failed: switch rule can't be
> created")
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end
> actions queue index 3 / end", "testpmd>", 15)
> +        self.verify( "Successed" and "(1)" in out, "failed: fdir rule
> + can't be created")
> +
> +        #send a pkt to check the switch rule is work for its high priority
> +        self.dut.send_expect("start", "testpmd>", 20)
> +        a=self.check_link()
> +        self.verify(a, "failed: link can not up")
> +
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:01"
> )/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Ra
> w("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 1)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 1')
> +
> +        #remove the switch rule and check the fdir rule is work
> +        self.dut.send_expect("flow destroy 0 rule 0", "testpmd>", 15)
> +        self.dut.send_expect("start", "testpmd>", 20)
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:02"
> )/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Ra
> w("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 3)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 3')
> +
> +        self.dut.send_expect("flow flush 0", "testpmd>", 15)
> +        self.dut.send_expect("quit", "#", 50)
> +
> +        #restart testpmd in pipeline mode
> +        command = './%s/app/testpmd -c %s -n 4 -w %s,pipeline-mode-
> support=1 --log-level="ice,7" -- -i --portmask=%s --rxq=10 --txq=10' %
> (self.target, self.coreMask, self.dut.ports_info[0]['pci'],
> utils.create_mask([self.dut_ports[0]]))
> +        out = self.dut.send_expect(command, "testpmd> ", 120)
> +        self.logger.debug(out)
> +
> +        self.dut.send_expect("set fwd rxonly", "testpmd> ", 15)
> +        self.dut.send_expect("set verbose 1", "testpmd> ", 15)
> +
> +        #create rules with same parameters but different action
> +        out=self.dut.send_expect("flow create 0 priority 1 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end
> actions queue index 3 / end", "testpmd>", 15)
> +        self.verify( "Successed" and "(1)" in out, "failed: fdir rule can't be
> created")
> +        out=self.dut.send_expect("flow create 0 priority 0 ingress pattern eth /
> ipv4 src is 192.168.0.2 dst is 192.168.0.3 tos is 4 / tcp src is 25 dst is 23 / end
> actions queue index 1 / end", "testpmd>", 15)
> +        self.verify( "Successed" and "(2)" in out, "failed: switch rule
> + can't be created")
> +
> +        #send a pkt to check the switch rule is work for its high priority
> +        self.dut.send_expect("start", "testpmd>", 20)
> +        a=self.check_link()
> +        self.verify(a, "failed: link can not up")
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:01"
> )/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Ra
> w("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 1)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 1')
> +
> +        #remove the switch rule and check the fdir rule is work
> +        self.dut.send_expect("flow destroy 0 rule 1", "testpmd>", 15)
> +        self.dut.send_expect("start", "testpmd>", 20)
> +
> self.send_pkt('sendp([Ether(dst="00:00:00:00:01:00",src="11:22:33:44:55:02"
> )/IP(src="192.168.0.2",dst="192.168.0.3",tos=4)/TCP(sport=25,dport=23)/Ra
> w("x"*80)],iface="%s")'%(self.__tx_iface))
> +        out=self.dut.send_expect("stop", "testpmd>", 20)
> +        pkt_num=self.check_queue_rx_packets_number(out, 3)
> +        self.verify(pkt_num==1, "failed: the flow rule can not work")
> +        self.logger.info('pass: queue id is 3')
> +
> +        self.dut.send_expect("flow flush 0", "testpmd>", 20)
> +        self.dut.send_expect("quit", "#", 50)
> +    #
> +
> +
> ################################################################
> ######
> + #####
> +
> +    def tear_down_all(self):
> +        pass
> +
> +    def tear_down(self):
> +        self.dut.kill_all()
> +
> +
> +
> +
> +
> +
> +
> +
> +
> +
> +
> +
> --
> 2.17.1