* [dts] [PATCH V3 1/13] conf/l3fwd: l3fwd suite testing configuration
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 2/13] conf/l3fwd_base: l3fwd base class flows configuration yufengmx
` (12 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add l3fwd suite testing configuration.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
conf/l3fwd.cfg | 400 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 400 insertions(+)
create mode 100644 conf/l3fwd.cfg
diff --git a/conf/l3fwd.cfg b/conf/l3fwd.cfg
new file mode 100644
index 0000000..e566aff
--- /dev/null
+++ b/conf/l3fwd.cfg
@@ -0,0 +1,400 @@
+# Throughput numbers vary in different environment.
+# Users could change these configuration on demand:
+#
+# - test_parameters defines the combination of frame size and descriptor
+# numbers, and the pattern is
+# {
+# 'Numbers of Cores/Sockets/Queues #1': ['frame_size #1', 'frame_size #2',...],
+# 'Numbers of Cores/Sockets/Queues #2': ['frame_size #1', 'frame_size #2',...],
+# ......
+# }
+#
+# - test_duration is how many seconds each combination performance will
+# be recorded, default is 60s
+#
+# - accepted_tolerance defines the accepted tolerance between test
+# results and expected numbers, unit is percentage, (actual number - expected number)/expected number/100
+#
+# - expected_throughput is a dictionary defining expected throughput
+# numbers based on NIC, and the pattern is
+# {
+# 'columbiaville_100g':
+# {
+# 'Numbers of Cores/Sockets/Queues #1':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# 'Numbers of Cores/Sockets/Queues #2':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# }
+# ......
+# }
+# Every user should fill it out with your actual numbers. To keep the
+# expected throughput private, dts takes 0.00 as default.
+#
+#==========this feature supported is P4.======================
+# - if update_expected == True, and add argument "--update-expected" in
+# bash command, all objects in this file will changed after the run
+# for example: ./dts --update-expected
+# Highlights:
+# At the beginning, please change test_parameters according to your
+# requirements, then run ./dts --update-expected to get the absolute
+# results which will replace the default numbers 0.00 in this configuration.
+# So you will have your own private configuration, and could start your
+# tests as usual.
+
+[suite]
+update_expected = True
+
+test_duration = 12
+accepted_tolerance = 1
+test_parameters = {
+ '1C/1T/1Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '1C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '4C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],}
+expected_throughput = {
+ 'test_perf_throughput_ipv4_em': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},},
+ 'test_perf_throughput_ipv4_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},},
+ 'test_perf_throughput_ipv6_em': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},},
+ 'test_perf_throughput_ipv6_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},},}
+expected_rfc2544 = {
+ 'test_perf_rfc2544_ipv4_em': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '1C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '4C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },},},
+ 'test_perf_rfc2544_ipv4_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '1C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '4C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },},},
+ 'test_perf_rfc2544_ipv6_em': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '1C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '4C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },},},
+ 'test_perf_rfc2544_ipv6_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '1C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '4C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },},},}
\ No newline at end of file
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 2/13] conf/l3fwd_base: l3fwd base class flows configuration
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 1/13] conf/l3fwd: l3fwd suite testing configuration yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 3/13] conf/l3fwd_em: suite testing configuration yufengmx
` (11 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add l3fwd base class flows configuration.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
conf/l3fwd_base.cfg | 103 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 103 insertions(+)
create mode 100644 conf/l3fwd_base.cfg
diff --git a/conf/l3fwd_base.cfg b/conf/l3fwd_base.cfg
new file mode 100644
index 0000000..ac2ab26
--- /dev/null
+++ b/conf/l3fwd_base.cfg
@@ -0,0 +1,103 @@
+[suite]
+l3fwd_flows = {
+ "ipv4": {
+ "em": [
+ {
+ "ipv4": {
+ "dst": "101.0.0.0",
+ "src": "100.10.0.1"
+ },
+ "udp": {
+ "dst": 11,
+ "src": 101
+ }
+ },
+ {
+ "ipv4": {
+ "dst": "201.0.0.0",
+ "src": "200.20.0.1"
+ },
+ "udp": {
+ "dst": 12,
+ "src": 102
+ }
+ },
+ {
+ "ipv4": {
+ "dst": "111.0.0.0",
+ "src": "100.30.0.1"
+ },
+ "udp": {
+ "dst": 11,
+ "src": 101
+ }
+ },
+ {
+ "ipv4": {
+ "dst": "211.0.0.0",
+ "src": "200.40.0.1"
+ },
+ "udp": {
+ "dst": 11,
+ "src": 102
+ }
+ }
+ ],
+ "lpm": [
+ "198.18.0.0/24",
+ "198.18.1.0/24",
+ "198.18.2.0/24",
+ "198.18.3.0/24",
+ "198.18.4.0/24",
+ "198.18.5.0/24",
+ "198.18.6.0/24",
+ "198.18.7.0/24"
+ ]
+ },
+ "ipv6": {
+ "em": [
+ {
+ "ipv6": {
+ "dst": "fe80:0000:0000:0000:021e:67ff:fe00:0000",
+ "src": "fe80:0000:0000:0000:021b:21ff:fe91:3805"
+ },
+ "udp": {
+ "dst": 101,
+ "src": 11 }
+ },
+ {
+ "ipv6": {
+ "dst": "fe90:0000:0000:0000:021e:67ff:fe00:0000",
+ "src": "fe90:0000:0000:0000:021b:21ff:fe91:3805" },
+ "udp": {
+ "dst": 102,
+ "src": 12 }
+ },
+ {
+ "ipv6": {
+ "dst": "fea0:0000:0000:0000:021e:67ff:fe00:0000",
+ "src": "fea0:0000:0000:0000:021b:21ff:fe91:3805" },
+ "udp": {
+ "dst": 101,
+ "src": 11 }
+ },
+ {
+ "ipv6": {
+ "dst": "feb0:0000:0000:0000:021e:67ff:fe00:0000",
+ "src": "feb0:0000:0000:0000:021b:21ff:fe91:3805" },
+ "udp": {
+ "dst": 102,
+ "src": 12 }
+ }
+ ],
+ "lpm": [
+ "3201:20:00:00:00:00:00:00/48",
+ "3201:20:00:00:01:00:00:00/48",
+ "3201:20:00:00:02:00:00:00/48",
+ "3201:20:00:00:03:00:00:00/48",
+ "3201:20:00:00:04:00:00:00/48",
+ "3201:20:00:00:05:00:00:00/48",
+ "3201:20:00:00:06:00:00:00/48",
+ "3201:20:00:00:07:00:00:00/48"
+ ]
+ } }
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 3/13] conf/l3fwd_em: suite testing configuration
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 1/13] conf/l3fwd: l3fwd suite testing configuration yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 2/13] conf/l3fwd_base: l3fwd base class flows configuration yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 4/13] conf/l3fwd_lpm_ipv4_rfc2544: " yufengmx
` (10 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add l3fwd_em suite testing configuration.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
conf/l3fwd_em.cfg | 147 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 conf/l3fwd_em.cfg
diff --git a/conf/l3fwd_em.cfg b/conf/l3fwd_em.cfg
new file mode 100644
index 0000000..7f2408e
--- /dev/null
+++ b/conf/l3fwd_em.cfg
@@ -0,0 +1,147 @@
+# Throughput numbers vary in different environment.
+# Users could change these configuration on demand:
+#
+# - test_parameters defines the combination of frame size and descriptor
+# numbers, and the pattern is
+# {
+# 'Numbers of Cores/Sockets/Queues #1': ['frame_size #1', 'frame_size #2',...],
+# 'Numbers of Cores/Sockets/Queues #2': ['frame_size #1', 'frame_size #2',...],
+# ......
+# }
+#
+# - test_duration is how many seconds each combination performance will
+# be recorded, default is 60s
+#
+# - accepted_tolerance defines the accepted tolerance between test
+# results and expected numbers, unit is percentage, (actual number - expected number)/expected number/100
+#
+# - expected_throughput is a dictionary defining expected throughput
+# numbers based on NIC, and the pattern is
+# {
+# 'columbiaville_100g':
+# {
+# 'Numbers of Cores/Sockets/Queues #1':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# 'Numbers of Cores/Sockets/Queues #2':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# }
+# ......
+# }
+# Every user should fill it out with your actual numbers. To keep the
+# expected throughput private, dts takes 0.00 as default.
+#
+#==========this feature supported is P4.======================
+# - if update_expected == True, and add argument "--update-expected" in
+# bash command, all objects in this file will changed after the run
+# for example: ./dts --update-expected
+# Highlights:
+# At the beginning, please change test_parameters according to your
+# requirements, then run ./dts --update-expected to get the absolute
+# results which will replace the default numbers 0.00 in this configuration.
+# So you will have your own private configuration, and could start your
+# tests as usual.
+
+[suite]
+update_expected = True
+
+test_duration = 12
+accepted_tolerance = 1
+test_parameters = {
+ '1C/1T/1Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '1C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '4C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],}
+expected_throughput = {
+ 'test_perf_throughput_ipv4_em': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},},
+ 'test_perf_throughput_ipv6_em': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},},}
\ No newline at end of file
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 4/13] conf/l3fwd_lpm_ipv4_rfc2544: suite testing configuration
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (2 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 3/13] conf/l3fwd_em: suite testing configuration yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 5/13] conf/l3fwd_lpm_ipv4: l3fwd_lpm_ipv4 " yufengmx
` (9 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add l3fwd_lpm_ipv4_rfc2544 suite testing configuration.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
conf/l3fwd_lpm_ipv4_rfc2544.cfg | 105 ++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 conf/l3fwd_lpm_ipv4_rfc2544.cfg
diff --git a/conf/l3fwd_lpm_ipv4_rfc2544.cfg b/conf/l3fwd_lpm_ipv4_rfc2544.cfg
new file mode 100644
index 0000000..4ca40de
--- /dev/null
+++ b/conf/l3fwd_lpm_ipv4_rfc2544.cfg
@@ -0,0 +1,105 @@
+# Throughput numbers vary in different environment.
+# Users could change these configuration on demand:
+#
+# - test_parameters defines the combination of frame size and descriptor
+# numbers, and the pattern is
+# {
+# 'Numbers of Cores/Sockets/Queues #1': ['frame_size #1', 'frame_size #2',...],
+# 'Numbers of Cores/Sockets/Queues #2': ['frame_size #1', 'frame_size #2',...],
+# ......
+# }
+#
+# - test_duration is how many seconds each combination performance will
+# be recorded, default is 60s
+#
+# - accepted_tolerance defines the accepted tolerance between test
+# results and expected numbers, unit is percentage, (actual number - expected number)/expected number/100
+#
+# - expected_throughput is a dictionary defining expected throughput
+# numbers based on NIC, and the pattern is
+# {
+# 'columbiaville_100g':
+# {
+# 'Numbers of Cores/Sockets/Queues #1':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# 'Numbers of Cores/Sockets/Queues #2':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# }
+# ......
+# }
+# Every user should fill it out with your actual numbers. To keep the
+# expected throughput private, dts takes 0.00 as default.
+#
+#==========this feature supported is P4.======================
+# - if update_expected == Ture, and add argument "--update-expected" in
+# bash command, all objects in this file will changed after the run
+# for example: ./dts --update-expected
+# Highlights:
+# At the begining, please change test_parameters according to your
+# requirements, then run ./dts --update-expected to get the absolute
+# results which will replace the default numbers 0.00 in this configuration.
+# So you will have your own private configuration, and could start your
+# tests as ususal.
+
+[suite]
+update_expected = True
+
+test_duration = 60
+accepted_tolerance = 1
+test_parameters = {
+ '1C/1T/1Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '1C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '4C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],}
+expected_rfc2544 = {
+ 'test_perf_rfc2544_ipv4_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '1C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/2T/2Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '2C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },
+ '4C/4T/4Q': {
+ '64': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '128': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '256': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '512': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1024': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1280': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } },
+ '1518': { 'rate' :'100.00', 'traffic_opt': {'min_rate': '10.0', 'max_rate': '100.0', 'pdr': '0.01', 'accuracy': '5', } } },},},}
\ No newline at end of file
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 5/13] conf/l3fwd_lpm_ipv4: l3fwd_lpm_ipv4 testing configuration
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (3 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 4/13] conf/l3fwd_lpm_ipv4_rfc2544: " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 6/13] conf/l3fwd_lpm_ipv6: suite " yufengmx
` (8 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add l3fwd_lpm_ipv4 suite testing configuration.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
conf/l3fwd_lpm_ipv4.cfg | 105 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 conf/l3fwd_lpm_ipv4.cfg
diff --git a/conf/l3fwd_lpm_ipv4.cfg b/conf/l3fwd_lpm_ipv4.cfg
new file mode 100644
index 0000000..5935c65
--- /dev/null
+++ b/conf/l3fwd_lpm_ipv4.cfg
@@ -0,0 +1,105 @@
+# Throughput numbers vary in different environment.
+# Users could change these configuration on demand:
+#
+# - test_parameters defines the combination of frame size and descriptor
+# numbers, and the pattern is
+# {
+# 'Numbers of Cores/Sockets/Queues #1': ['frame_size #1', 'frame_size #2',...],
+# 'Numbers of Cores/Sockets/Queues #2': ['frame_size #1', 'frame_size #2',...],
+# ......
+# }
+#
+# - test_duration is how many seconds each combination performance will
+# be recorded, default is 60s
+#
+# - accepted_tolerance defines the accepted tolerance between test
+# results and expected numbers, unit is percentage, (actual number - expected number)/expected number/100
+#
+# - expected_throughput is a dictionary defining expected throughput
+# numbers based on NIC, and the pattern is
+# {
+# 'columbiaville_100g':
+# {
+# 'Numbers of Cores/Sockets/Queues #1':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# 'Numbers of Cores/Sockets/Queues #2':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# }
+# ......
+# }
+# Every user should fill it out with your actual numbers. To keep the
+# expected throughput private, dts takes 0.00 as default.
+#
+#==========this feature supported is P4.======================
+# - if update_expected == Ture, and add argument "--update-expected" in
+# bash command, all objects in this file will changed after the run
+# for example: ./dts --update-expected
+# Highlights:
+# At the begining, please change test_parameters according to your
+# requirements, then run ./dts --update-expected to get the absolute
+# results which will replace the default numbers 0.00 in this configuration.
+# So you will have your own private configuration, and could start your
+# tests as ususal.
+
+[suite]
+update_expected = True
+
+test_duration = 60
+accepted_tolerance = 1
+test_parameters = {
+ '1C/1T/1Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '1C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '4C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],}
+expected_throughput = {
+ 'test_perf_throughput_ipv4_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},}, }
\ No newline at end of file
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 6/13] conf/l3fwd_lpm_ipv6: suite testing configuration
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (4 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 5/13] conf/l3fwd_lpm_ipv4: l3fwd_lpm_ipv4 " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 7/13] tests/l3fwd: upload automation script yufengmx
` (7 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add l3fwd_lpm_ipv6 suite testing configuration.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
conf/l3fwd_lpm_ipv6.cfg | 105 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 conf/l3fwd_lpm_ipv6.cfg
diff --git a/conf/l3fwd_lpm_ipv6.cfg b/conf/l3fwd_lpm_ipv6.cfg
new file mode 100644
index 0000000..200ddcd
--- /dev/null
+++ b/conf/l3fwd_lpm_ipv6.cfg
@@ -0,0 +1,105 @@
+# Throughput numbers vary in different environment.
+# Users could change these configuration on demand:
+#
+# - test_parameters defines the combination of frame size and descriptor
+# numbers, and the pattern is
+# {
+# 'Numbers of Cores/Sockets/Queues #1': ['frame_size #1', 'frame_size #2',...],
+# 'Numbers of Cores/Sockets/Queues #2': ['frame_size #1', 'frame_size #2',...],
+# ......
+# }
+#
+# - test_duration is how many seconds each combination performance will
+# be recorded, default is 60s
+#
+# - accepted_tolerance defines the accepted tolerance between test
+# results and expected numbers, unit is percentage, (actual number - expected number)/expected number/100
+#
+# - expected_throughput is a dictionary defining expected throughput
+# numbers based on NIC, and the pattern is
+# {
+# 'columbiaville_100g':
+# {
+# 'Numbers of Cores/Sockets/Queues #1':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# 'Numbers of Cores/Sockets/Queues #2':
+# {
+# 'frame_size #1': 'expected number',
+# 'frame_size #2': 'expected number',
+# ...
+# },
+# }
+# ......
+# }
+# Every user should fill it out with your actual numbers. To keep the
+# expected throughput private, dts takes 0.00 as default.
+#
+#==========this feature supported is P4.======================
+# - if update_expected == Ture, and add argument "--update-expected" in
+# bash command, all objects in this file will changed after the run
+# for example: ./dts --update-expected
+# Highlights:
+# At the begining, please change test_parameters according to your
+# requirements, then run ./dts --update-expected to get the absolute
+# results which will replace the default numbers 0.00 in this configuration.
+# So you will have your own private configuration, and could start your
+# tests as ususal.
+
+[suite]
+update_expected = True
+
+test_duration = 60
+accepted_tolerance = 1
+test_parameters = {
+ '1C/1T/1Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '1C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/2T/2Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '2C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],
+ '4C/4T/4Q': ['64', '128', '256', '512', '1024', '1280', '1518',],}
+expected_throughput = {
+ 'test_perf_throughput_ipv6_lpm': {
+ 'niantic': {
+ '1C/1T/1Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '1C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/2T/2Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '2C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },
+ '4C/4T/4Q': {
+ '64': '0.00',
+ '128': '0.00',
+ '256': '0.00',
+ '512': '0.00',
+ '1024': '0.00',
+ '1280': '0.00',
+ '1518': '0.00', },},}, }
\ No newline at end of file
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 7/13] tests/l3fwd: upload automation script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (5 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 6/13] conf/l3fwd_lpm_ipv6: suite " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 8/13] tests/l3fwd_em: " yufengmx
` (6 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
upload l3fwd suite automation script.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_l3fwd.py | 370 +++++----------------------------------
1 file changed, 44 insertions(+), 326 deletions(-)
diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
index a9016d4..ea89cfe 100644
--- a/tests/TestSuite_l3fwd.py
+++ b/tests/TestSuite_l3fwd.py
@@ -1,6 +1,6 @@
# BSD LICENSE
#
-# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -34,77 +34,42 @@ DPDK Test suite.
Layer-3 forwarding test script.
"""
-import utils
-import string
-import time
-import re
-import os
from test_case import TestCase
-from settings import HEADER_SIZE
-from pktgen import PacketGeneratorHelper
+from l3fwd_base import L3fwdBase, LPM, EM, L3_IPV6, L3_IPV4
-class TestL3fwd(TestCase):
-
- path = "./examples/l3fwd/build/"
- cmdline_2_ports = {
- "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0})'",
- "1S/1C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1})'",
- "1S/2C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0})'",
- "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P0,1,C{1.3.0}), (P1,1,C{1.4.0})'"}
-
- cmdline_4_ports = {
- "1S/1C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0}), (P2,0,C{1.1.0}), (P3,0,C{1.1.0})'",
- "1S/2C/2T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.1}), (P2,0,C{1.2.0}), (P3,0,C{1.2.1})'",
- "1S/4C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P2,1,C{1.3.0}), (P3,1,C{1.4.0})'",
- "1S/8C/1T": "%s -c %s -n %d -- -p %s --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}), (P2,0,C{1.3.0}), (P3,0,C{1,4,0}),\
- (P0,1,C{1.5.0}), (P1,1,C{1.6.0}), (P2,1,C{1.7.0}), (P3,1,C{1,8,0})'"}
+class TestL3fwd(TestCase, L3fwdBase):
+ #
+ # Test cases.
+ #
def set_up_all(self):
"""
Run at the start of each test suite.
L3fwd Prerequisites
"""
- self.tester.extend_external_packet_generator(TestL3fwd, self)
# Based on h/w type, choose how many ports to use
self.dut_ports = self.dut.get_ports(self.nic)
- global valports
- valports = [_ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
-
- # Verify that enough ports are available
- self.verify(len(valports) == 2 or len(valports) == 4, "Port number must be 2 or 4.")
-
+ valports = [
+ _ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+ self.logger.debug(valports)
+ self.verify_ports_number(valports)
# get socket and cores
- self.socket = self.dut.get_numa_id(self.dut_ports[0])
- self.cores = self.dut.get_core_list("1S/8C/1T", socket=self.socket)
- self.verify(self.cores is not None, "Insufficient cores for speed testing")
-
- self.frame_sizes = [64, 128, 256, 512, 1024, 1518]
-
- # Update config file and rebuild to get best perf on FVL
- if self.nic in ["fortville_sprit", "fortville_eagle", "fortville_25g"]:
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/CONFIG_RTE_LIBRTE_"
- "I40E_16BYTE_RX_DESC=y/' ./config/common_base", "#", 20)
- self.dut.build_install_dpdk(self.target)
-
- self.logger.info("Configure RX/TX descriptor to 2048, and re-build ./examples/l3fwd")
- self.dut.send_expect("sed -i -e 's/define RTE_TEST_RX_DESC_DEFAULT.*$/"
- + "define RTE_TEST_RX_DESC_DEFAULT 2048/' ./examples/l3fwd/main.c", "#", 20)
- self.dut.send_expect("sed -i -e 's/define RTE_TEST_TX_DESC_DEFAULT.*$/"
- + "define RTE_TEST_TX_DESC_DEFAULT 2048/' ./examples/l3fwd/main.c", "#", 20)
-
- self.pat = re.compile("P([0123])")
- self.test_results = {'header': [], 'data': []}
+ socket = self.dut.get_numa_id(self.dut_ports[0])
+ cores = self.dut.get_core_list("1S/8C/1T", socket=socket)
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+ # init l3fwd common base class parameters
+ self.l3fwd_init(valports, socket)
+ # preset testing environment
+ self.l3fwd_preset_test_environment(self.get_suite_cfg())
- # get dts output path
- if self.logger.log_path.startswith(os.sep):
- self.output_path = self.logger.log_path
- else:
- cur_path = os.path.dirname(
- os.path.dirname(os.path.realpath(__file__)))
- self.output_path = os.sep.join([cur_path, self.logger.log_path])
- # create an instance to set stream field setting
- self.pktgen_helper = PacketGeneratorHelper()
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ if self:
+ self.l3fwd_save_results()
+ self = None
def set_up(self):
"""
@@ -112,288 +77,41 @@ class TestL3fwd(TestCase):
"""
pass
- def portRepl(self, match):
- """
- Function to replace P([0123]) pattern in tables
- """
- portid = match.group(1)
- self.verify(int(portid) in range(4), "invalid port id")
- if int(portid) >= len(valports):
- return '0'
- else:
- return '%s' % valports[int(portid)]
-
- def install_l3fwd_application(self, l3_proto, mode):
- """
- Prepare long prefix match table, replace P(x) port pattern
- """
- l3fwd_method = l3_proto + "_l3fwd_" + mode
- self.dut.send_expect("make clean -C examples/l3fwd", "# ")
- if "lpm" in l3fwd_method:
- out = self.dut.build_dpdk_apps("./examples/l3fwd", "USER_FLAGS=-DAPP_LOOKUP_METHOD=1")
- elif "em" in l3fwd_method:
- out = self.dut.build_dpdk_apps("./examples/l3fwd", "USER_FLAGS=-DAPP_LOOKUP_METHOD=0")
- self.verify("Error" not in out, "compilation error 1")
- self.verify("No such file" not in out, "compilation error 2")
-
- # Backup the l3fwd exe.
- self.dut.send_expect("mv -f examples/l3fwd/build/l3fwd examples/l3fwd/build/%s" % l3fwd_method, "# ")
-
- def flows(self):
- """
- Return a list of packets that implements the flows described in the
- l3fwd test plan.
- """
- return {"ipv4": ['IP(src="1.2.3.4",dst="192.18.1.0")',
- 'IP(src="1.2.3.4",dst="192.18.1.1")',
- 'IP(src="1.2.3.4",dst="192.18.0.0")',
- 'IP(src="1.2.3.4",dst="192.18.0.1")',
- 'IP(src="1.2.3.4",dst="192.18.3.0")',
- 'IP(src="1.2.3.4",dst="192.18.3.1")',
- 'IP(src="1.2.3.4",dst="192.18.2.0")',
- 'IP(src="1.2.3.4",dst="192.18.2.1")'],
- "ipv6": [
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="fe80:0000:0000:0000:021b:21ff:fe91:3805")/UDP(sport=10,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="fe80:0000:0000:0000:031b:21ff:fe91:3805")/UDP(sport=10,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="2a80:0000:0000:0000:021b:21ff:fe91:3805")/UDP(sport=11,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="2a80:0000:0000:0000:031b:21ff:fe91:3805")/UDP(sport=11,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="2b80:0000:0000:0000:021b:21ff:fe91:3805")/UDP(sport=12,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="2b80:0000:0000:0000:031b:21ff:fe91:3805")/UDP(sport=12,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="2c80:0000:0000:0000:021b:21ff:fe91:3805")/UDP(sport=13,dport=1)',
- 'IPv6(src="fe80:0000:0000:0000:021e:67ff:fe0d:b60a",dst="2c80:0000:0000:0000:031b:21ff:fe91:3805")/UDP(sport=13,dport=1)'
- ]}
-
- def repl(self, match):
- pid = match.group(1)
- qid = match.group(2)
- self.logger.debug("%s\n" % match.group(3))
- lcid = self.dut.get_lcore_id(match.group(3))
- self.logger.debug("%s\n" % lcid)
-
- global corelist
- corelist.append(int(lcid))
- self.verify(int(pid) in range(4), "invalid port id")
- self.verify(lcid, "invalid thread id")
- return '%s,%s,%s' % (str(valports[int(pid)]), qid, lcid)
-
- def perpare_commandline(self, ports):
- """
- Generate the command line based on the number of ports
- """
- global corelist
- pat = re.compile("P([0123]),([0123]),(C\{\d.\d.\d\})")
- core_mask = {}
- if ports == 2:
- rtCmdLines = dict(TestL3fwd.cmdline_2_ports)
- elif ports == 4:
- rtCmdLines = dict(TestL3fwd.cmdline_4_ports)
-
- for key in rtCmdLines.keys():
- corelist = []
- while pat.search(rtCmdLines[key]):
- print rtCmdLines[key]
- rtCmdLines[key] = pat.sub(self.repl, rtCmdLines[key])
- core_mask[key] = utils.create_mask(set(corelist))
- return rtCmdLines, core_mask
-
- def create_pcap_file(self, frame_size, l3_proto):
- """
- Prepare traffic flow for packet generator
- """
- if l3_proto == 'ipv4':
- payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] - HEADER_SIZE['udp']
- else:
- payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ipv6'] - HEADER_SIZE['udp']
-
- pcaps = {}
- for _port in valports:
- index = valports[_port]
- dmac = self.dut.get_mac_address(index)
- cnt = 0
- layer3s = self.flows()[l3_proto][_port * 2:(_port + 1) * 2]
- for l3 in layer3s:
- flow = ['Ether(dst="%s")/%s/UDP()/("X"*%d)' % (dmac, l3, payload_size)]
- pcap = os.sep.join([self.output_path, "dst{0}_{1}.pcap".format(index, cnt)])
- self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, string.join(flow, ',')))
- self.tester.scapy_execute()
- if index not in pcaps:
- pcaps[index] = []
- pcaps[index].append(pcap)
- cnt += 1
- return pcaps
-
- def prepare_stream(self, pcaps):
- """
- create streams for ports, one port one stream
- """
- tgen_input = []
- for rxPort in valports:
- if rxPort % len(valports) == 0 or len(valports) % rxPort == 2:
- txIntf = self.tester.get_local_port(valports[rxPort + 1])
- port_id = valports[rxPort + 1]
- else:
- txIntf = self.tester.get_local_port(valports[rxPort - 1])
- port_id = valports[rxPort - 1]
- rxIntf = self.tester.get_local_port(valports[rxPort])
- for pcap in pcaps[port_id]:
- tgen_input.append((txIntf, rxIntf, pcap))
- return tgen_input
-
- def create_result_table(self, ttl, ttl1, ttl2, ttl3, ttl4):
-
- header_row = [ttl, ttl1, ttl2, ttl3, ttl4]
- self.test_results['header'] = header_row
- self.result_table_create(header_row)
- self.test_results['data'] = []
-
- def measure_throughput(self, l3_proto, mode):
- """
- measure throughput according to Layer-3 Protocal and Lookup Mode
- """
- # create result table
- self.create_result_table("Frame Size", "Mode", "S/C/T", "Mpps", "% Linerate")
- # build application
- self.install_l3fwd_application(l3_proto, mode)
- # perpare commandline and core mask
- rtCmdLines, core_mask = self.perpare_commandline(len(valports))
-
- for frame_size in self.frame_sizes:
- if l3_proto == "ipv6" and frame_size == 64:
- frame_size += 2
- for cores in rtCmdLines.keys():
- # Start L3fwd appliction
- command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto + "_l3fwd_" + mode, core_mask[cores],
- self.dut.get_memory_channels(), utils.create_mask(valports))
- if self.nic == "niantic":
- command_line += " --parse-ptype"
- if frame_size > 1518:
- command_line += " --enable-jumbo --max-pkt-len %d" % frame_size
- self.dut.send_expect(command_line, "L3FWD:", 120)
- self.logger.info("Executing l3fwd using %s mode, %d ports, %s and %d frame size"
- % (mode, len(valports), cores, frame_size))
- # crete traffic flow
- pcaps = self.create_pcap_file(frame_size, l3_proto)
- # send the traffic and Measure test
- tgenInput = self.prepare_stream(pcaps)
-
- vm_config = self.set_fields()
- if l3_proto == "ipv6":
- vm_config = None
- # clear streams before add new streams
- self.tester.pktgen.clear_streams()
- # run packet generator
- streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100, vm_config, self.tester.pktgen)
- # set traffic option
- traffic_opt = {'delay': 30}
- _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
- self.verify(pps > 0, "No traffic detected")
- # statistical result
- pps /= 1000000.0
- linerate = self.wirespeed(self.nic, frame_size, len(valports))
- percentage = pps * 100 / linerate
- data_row = [frame_size, mode, cores, str(pps), str(percentage)]
- self.result_table_add(data_row)
- self.test_results['data'].append(data_row)
- # Stop L3fwd
- self.dut.send_expect("^C", "#")
- time.sleep(1)
- # Print result
- self.result_table_print()
-
- def measure_rfc2544(self, l3_proto, mode):
+ def tear_down(self):
"""
- measure RFC2544 according to Layer-3 Protocal and Lookup Mode
+ Run after each test case.
"""
- # create result table
- self.create_result_table("Frame Size", "Mode", "S/C/T", "Zero Loss Throughput(Mpps)", " % Zero Loss Rate")
- # build application
- self.install_l3fwd_application(l3_proto, mode)
- # perpare commandline and core mask
- rtCmdLines, core_mask = self.perpare_commandline(len(valports))
-
- for frame_size in self.frame_sizes:
- if l3_proto == "ipv6" and frame_size == 64:
- frame_size += 2
- for cores in rtCmdLines.keys():
- # in order to save time, only some of the cases will be run.
- if cores in ["1S/2C/1T", "1S/4C/1T"]:
- # Start L3fwd appliction
- command_line = rtCmdLines[cores] % (TestL3fwd.path + l3_proto + "_l3fwd_" + mode, core_mask[cores],
- self.dut.get_memory_channels(), utils.create_mask(valports))
- if self.nic == "niantic":
- command_line += " --parse-ptype"
- if frame_size > 1518:
- command_line += " --enable-jumbo --max-pkt-len %d" % frame_size
- self.dut.send_expect(command_line, "L3FWD:", 120)
- self.logger.info("Executing l3fwd using %s mode, %d ports, %s and %d frame size"
- % (mode, len(valports), cores, frame_size))
- # crete traffic flow
- pcaps = self.create_pcap_file(frame_size, l3_proto)
- # send the traffic and Measure test
- tgenInput = self.prepare_stream(pcaps)
-
- vm_config = self.set_fields()
- if l3_proto == "ipv6":
- vm_config = None
- # clear streams before add new streams
- self.tester.pktgen.clear_streams()
- # run packet generator
- streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100, vm_config, self.tester.pktgen)
- # set traffic option
- traffic_opt = {'duration': 15}
- zero_loss_rate, tx_pkts, rx_pkts = self.tester.pktgen.measure_rfc2544(stream_ids=streams,
- options=traffic_opt)
- # statistical result
- linerate = self.wirespeed(self.nic, frame_size, len(valports))
- zero_loss_throughput = (linerate * zero_loss_rate) / 100
- data_row = [frame_size, mode, cores, str(zero_loss_throughput), str(zero_loss_rate)]
- self.result_table_add(data_row)
- self.test_results['data'].append(data_row)
- # Stop L3fwd
- self.dut.send_expect("^C", "#")
- time.sleep(1)
- # Print result
- self.result_table_print()
+ self.dut.kill_all()
+ self.l3fwd_reset_cur_case()
def test_perf_rfc2544_ipv4_lpm(self):
- self.measure_rfc2544(l3_proto="ipv4", mode="lpm")
+ self.l3fwd_set_cur_case('test_perf_rfc2544_ipv4_lpm')
+ self.qt_rfc2544(l3_proto=L3_IPV4, mode=LPM)
def test_perf_rfc2544_ipv4_em(self):
- self.measure_rfc2544(l3_proto="ipv4", mode="em")
+ self.l3fwd_set_cur_case('test_perf_rfc2544_ipv4_em')
+ self.qt_rfc2544(l3_proto=L3_IPV4, mode=EM)
def test_perf_throughput_ipv4_lpm(self):
- self.measure_throughput(l3_proto="ipv4", mode="lpm")
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv4_lpm')
+ self.ms_throughput(l3_proto=L3_IPV4, mode=LPM)
def test_perf_throughput_ipv4_em(self):
- self.measure_throughput(l3_proto="ipv4", mode="em")
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv4_em')
+ self.ms_throughput(l3_proto=L3_IPV4, mode=EM)
def test_perf_rfc2544_ipv6_lpm(self):
- self.measure_rfc2544(l3_proto="ipv6", mode="lpm")
+ self.l3fwd_set_cur_case('test_perf_rfc2544_ipv6_lpm')
+ self.qt_rfc2544(l3_proto=L3_IPV6, mode=LPM)
def test_perf_rfc2544_ipv6_em(self):
- self.measure_rfc2544(l3_proto="ipv6", mode="em")
+ self.l3fwd_set_cur_case('test_perf_rfc2544_ipv6_em')
+ self.qt_rfc2544(l3_proto=L3_IPV6, mode=EM)
def test_perf_throughput_ipv6_lpm(self):
- self.measure_throughput(l3_proto="ipv6", mode="lpm")
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv6_lpm')
+ self.ms_throughput(l3_proto=L3_IPV6, mode=LPM)
def test_perf_throughput_ipv6_em(self):
- self.measure_throughput(l3_proto="ipv6", mode="em")
-
- def set_fields(self):
- """
- set ip protocol field behavior
- """
- fields_config = {'ip': {'src': {'action': 'random'}, }, }
- return fields_config
-
- def tear_down(self):
- """
- Run after each test case.
- """
- self.dut.kill_all()
-
- def tear_down_all(self):
- """
- Run after each test suite.
- """
- pass
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv6_em')
+ self.ms_throughput(l3_proto=L3_IPV6, mode=EM)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 8/13] tests/l3fwd_em: upload automation script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (6 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 7/13] tests/l3fwd: upload automation script yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 9/13] tests/l3fwd_lpm_ipv4_rfc2544: " yufengmx
` (5 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
upload l3fwd_em suite automation script.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_l3fwd_em.py | 258 +++++-------------------------------
1 file changed, 30 insertions(+), 228 deletions(-)
diff --git a/tests/TestSuite_l3fwd_em.py b/tests/TestSuite_l3fwd_em.py
index ee50fcc..c586759 100644
--- a/tests/TestSuite_l3fwd_em.py
+++ b/tests/TestSuite_l3fwd_em.py
@@ -1,6 +1,6 @@
# BSD LICENSE
#
-# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -31,257 +31,59 @@
"""
DPDK Test suite.
-Layer-3 forwarding exact-match test script.
+Layer-3 forwarding test script.
"""
-
-import os
-import utils
-import string
-import re
from test_case import TestCase
-from exception import VerifyFailure
-from settings import HEADER_SIZE
-from utils import *
-from pktgen import PacketGeneratorHelper
-
-
-class TestL3fwdEM(TestCase):
-
- path = "./examples/l3fwd/build/"
-
- test_cases_2_ports = {"1S/1C/1T": "%s -c %s -n %d -- -p %s -E --config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0})' --hash-entry-num 0x400000",
- "1S/2C/1T": "%s -c %s -n %d -- -p %s -E --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0})' --hash-entry-num 0x400000",
- "1S/4C/1T": "%s -c %s -n %d -- -p %s -E --config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}),(P0,1,C{1.3.0}), (P1,1,C{1.4.0})' --hash-entry-num 0x400000"
- }
-
- frame_sizes = [64, 65, 128, 256, 512, 1518]
- methods = ['exact']
-
- #
- #
- # Utility methods and other non-test code.
- #
- # Insert or move non-test functions here.
- def portRepl(self, match):
- """
- Function to replace P([0123]) pattern in tables
- """
+from l3fwd_base import L3fwdBase, LPM, EM, L3_IPV6, L3_IPV4
- portid = match.group(1)
- self.verify(int(portid) in range(4), "invalid port id")
- if int(portid) >= len(valports):
- return '0'
- else:
- return '%s' % valports[int(portid)]
- #
- #
+class TestL3fwdEm(TestCase, L3fwdBase):
#
# Test cases.
#
-
def set_up_all(self):
"""
Run at the start of each test suite.
-
-
L3fwd Prerequisites
"""
# Based on h/w type, choose how many ports to use
- ports = self.dut.get_ports(socket=1)
- if not ports:
- ports = self.dut.get_ports(socket=0)
-
- self.tester.extend_external_packet_generator(TestL3fwdEM, self)
- # Verify that enough ports are available
- self.verify(len(ports) >= 2, "Insufficient ports for speed testing")
-
- netdev = self.dut.ports_info[ports[0]]['port']
-
- self.port_socket = netdev.socket
-
- # Verify that enough threads are available
- cores = self.dut.get_core_list("1S/8C/2T")
+ self.dut_ports = self.dut.get_ports(self.nic)
+ valports = [
+ _ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+ self.logger.debug(valports)
+ self.verify_ports_number(valports)
+ # get socket and cores
+ socket = self.dut.get_numa_id(self.dut_ports[0])
+ cores = self.dut.get_core_list("1S/8C/1T", socket=socket)
self.verify(cores is not None, "Insufficient cores for speed testing")
+ # init l3fwd common base class parameters
+ self.l3fwd_init(valports, socket)
+ # preset testing environment
+ self.l3fwd_preset_test_environment(self.get_suite_cfg())
- global valports
- valports = [_ for _ in ports if self.tester.get_local_port(_) != -1]
-
- self.verify(len(valports) >= 2, "Insufficient active ports for speed testing")
-
- pat = re.compile("P([0123])")
-
- # Update config file and rebuild to get best perf on FVL
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_PCI_CONFIG=n/CONFIG_RTE_PCI_CONFIG=y/' ./config/common_linuxapp", "#", 20)
- self.dut.send_expect("sed -i -e 's/CONFIG_RTE_PCI_EXTENDED_TAG=.*$/CONFIG_RTE_PCI_EXTENDED_TAG=\"on\"/' ./config/common_linuxapp", "#", 20)
- self.dut.build_install_dpdk(self.target)
-
- out = self.dut.build_dpdk_apps("./examples/l3fwd")
- self.verify("Error" not in out, "compilation error 1")
- self.verify("No such file" not in out, "compilation error 2")
-
- self.l3fwd_test_results = {'header': [],
- 'data': []}
- # get dts output path
- if self.logger.log_path.startswith(os.sep):
- self.output_path = self.logger.log_path
- else:
- cur_path = os.path.dirname(
- os.path.dirname(os.path.realpath(__file__)))
- self.output_path = os.sep.join([cur_path, self.logger.log_path])
- # create an instance to set stream field setting
- self.pktgen_helper = PacketGeneratorHelper()
-
- def repl(self, match):
- pid = match.group(1)
- qid = match.group(2)
- self.logger.debug("%s\n" % match.group(3))
- lcid = self.dut.get_lcore_id(match.group(3))
- self.logger.debug("%s\n" % lcid)
-
- global corelist
- corelist.append(int(lcid))
-
- self.verify(int(pid) in range(4), "invalid port id")
- self.verify(lcid, "invalid thread id")
-
- return '%s,%s,%s' % (str(valports[int(pid)]), qid, lcid)
-
- def set_up(self):
+ def tear_down_all(self):
"""
- Run before each test case.
+ Run after each test suite.
"""
pass
- def test_perf_l3fwd_2ports(self):
+ def set_up(self):
"""
- L3fwd main 2 ports.
+ Run before each test case.
"""
-
- header_row = ["Frame", "mode", "S/C/T", "Mpps", "% linerate"]
- self.l3fwd_test_results['header'] = header_row
- self.result_table_create(header_row)
- self.l3fwd_test_results['data'] = []
-
- for frame_size in TestL3fwdEM.frame_sizes:
-
- # Prepare traffic flow
- payload_size = frame_size - \
- HEADER_SIZE['ip'] - HEADER_SIZE['eth'] - HEADER_SIZE['tcp']
-
- # Traffic for port0
- dmac_port0 = self.dut.get_mac_address(valports[0])
- flow1 = '[Ether(dst="%s")/IP(src="200.20.0.1",dst="201.0.0.0")/TCP(sport=12,dport=102)/("X"*%d)]' %(dmac_port0,payload_size)
-
- pcaps = {}
- pcap = os.sep.join([self.output_path, "dst0.pcap"])
- pcaps[0] = pcap
- self.tester.scapy_append('wrpcap("{0}",{1})'.format(pcap, flow1))
-
- # Traffic for port1
- dmac_port1 = self.dut.get_mac_address(valports[1])
- flow2 = '[Ether(dst="%s")/IP(src="100.10.0.1",dst="101.0.0.0")/TCP(sport=11,dport=101)/("X"*%d)]' %(dmac_port1,payload_size)
-
- pcap = os.sep.join([self.output_path, "dst1.pcap"])
- pcaps[1] = pcap
- self.tester.scapy_append('wrpcap("{0}",{1})'.format(pcap, flow2))
- self.tester.scapy_execute()
-
- # Prepare the command line
- global corelist
- pat = re.compile("P([0123]),([0123]),(C\{\d.\d.\d\})")
-
- pat2 = re.compile("C\{\d")
- repl1 = "C{" + str(self.port_socket)
-
- coreMask = {}
- rtCmdLines = dict(TestL3fwdEM.test_cases_2_ports)
- for key in rtCmdLines.keys():
- corelist = []
- while pat.search(rtCmdLines[key]):
- # Change the socket to the NIC's socket
- if key.find('1S') >= 0:
- rtCmdLines[key] = pat2.sub(repl1, rtCmdLines[key])
- rtCmdLines[key] = pat.sub(self.repl, rtCmdLines[key])
-
- self.logger.info("%s\n" % str(corelist))
- coreMask[key] = utils.create_mask(set(corelist))
-
- # measure by two different mode
- for mode in TestL3fwdEM.methods:
-
- # start l3fwd
- index = 0
- subtitle = []
- for cores in rtCmdLines.keys():
-
- info = "Executing l3fwd using %s mode, 2 ports, %s and %d frame size.\n" % (
- mode, cores, frame_size)
-
- self.logger.info(info)
- self.rst_report(info, annex=True)
-
- subtitle.append(cores)
- cmdline = rtCmdLines[cores] % (TestL3fwdEM.path + "l3fwd", coreMask[cores],
- self.dut.get_memory_channels(), utils.create_mask(valports[:2]))
-
- self.rst_report(cmdline + "\n", frame=True, annex=True)
-
- out = self.dut.send_expect(cmdline, "L3FWD: entering main loop", 120)
-
- # Measure test
- tgenInput = []
- for rxPort in range(2):
- # No use on rx/tx limitation
- if rxPort % 2 == 0:
- txIntf = self.tester.get_local_port(valports[rxPort + 1])
- else:
- txIntf = self.tester.get_local_port(valports[rxPort - 1])
-
- rxIntf = self.tester.get_local_port(valports[rxPort])
- port_index = valports[rxPort+1] if rxPort % 2 == 0 else valports[rxPort-1]
- tgenInput.append((txIntf, rxIntf, pcaps[port_index]))
-
- vm_config = self.set_fields()
- # clear streams before add new streams
- self.tester.pktgen.clear_streams()
- # run packet generator
- streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100,
- vm_config, self.tester.pktgen)
- traffic_opt = {'duration': 20, }
- _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
-
- self.verify(pps > 0, "No traffic detected")
- pps /= 1000000.0
- linerate = self.wirespeed(self.nic, frame_size, 2)
- pct = pps * 100 / linerate
- index += 1
-
- # Stop l3fwd
- self.dut.send_expect("^C", "#")
- data_row = [frame_size, mode, cores, str(pps), str(pct)]
- self.result_table_add(data_row)
- self.l3fwd_test_results['data'].append(data_row)
-
- self.result_table_print()
-
- def set_fields(self):
- ''' set ip protocol field behavior '''
- fields_config = {
- 'ip': {
- 'dst': {'range': 64, 'mask': '255.240.0.0', 'action': 'inc'}
- },}
-
- return fields_config
+ pass
def tear_down(self):
"""
Run after each test case.
"""
- pass
+ self.dut.kill_all()
+ self.l3fwd_reset_cur_case()
- def tear_down_all(self):
- """
- Run after each test suite.
- """
- pass
+ def test_perf_throughput_ipv4_em(self):
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv4_em')
+ self.ms_throughput(l3_proto=L3_IPV4, mode=EM)
+
+ def test_perf_throughput_ipv6_em(self):
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv6_em')
+ self.ms_throughput(l3_proto=L3_IPV6, mode=EM)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 9/13] tests/l3fwd_lpm_ipv4_rfc2544: upload automation script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (7 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 8/13] tests/l3fwd_em: " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 0/13] tests/l3fwd_lpm_ipv4: " yufengmx
` (4 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
upload l3fwd_lpm_ipv4_rfc2544 suite automation script.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py | 86 +++++++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py
diff --git a/tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py b/tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py
new file mode 100644
index 0000000..380d2e9
--- /dev/null
+++ b/tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py
@@ -0,0 +1,86 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Layer-3 forwarding test script.
+"""
+from test_case import TestCase
+from l3fwd_base import L3fwdBase, LPM, EM, L3_IPV6, L3_IPV4
+
+
+class TestL3fwdLpmIpv4Rfc2544(TestCase, L3fwdBase):
+
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ L3fwd Prerequisites
+ """
+ # Based on h/w type, choose how many ports to use
+ self.dut_ports = self.dut.get_ports(self.nic)
+ valports = [
+ _ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+ self.logger.debug(valports)
+ self.verify_ports_number(valports)
+ # get socket and cores
+ socket = self.dut.get_numa_id(self.dut_ports[0])
+ cores = self.dut.get_core_list("1S/8C/1T", socket=socket)
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+ # init l3fwd common base class parameters
+ self.l3fwd_init(valports, socket)
+ # preset testing environment
+ self.l3fwd_preset_test_environment(self.get_suite_cfg())
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ self.l3fwd_reset_cur_case()
+
+ def test_perf_rfc2544_ipv4_lpm(self):
+ self.l3fwd_set_cur_case('test_perf_rfc2544_ipv4_lpm')
+ self.qt_rfc2544(l3_proto=L3_IPV4, mode=LPM)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 0/13] tests/l3fwd_lpm_ipv4: upload automation script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (8 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 9/13] tests/l3fwd_lpm_ipv4_rfc2544: " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 1/13] tests/l3fwd_lpm_ipv6: " yufengmx
` (3 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
upload l3fwd_lpm_ipv4 suite automation script.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_l3fwd_lpm_ipv4.py | 86 +++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 tests/TestSuite_l3fwd_lpm_ipv4.py
diff --git a/tests/TestSuite_l3fwd_lpm_ipv4.py b/tests/TestSuite_l3fwd_lpm_ipv4.py
new file mode 100644
index 0000000..dc6c0fd
--- /dev/null
+++ b/tests/TestSuite_l3fwd_lpm_ipv4.py
@@ -0,0 +1,86 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Layer-3 forwarding test script.
+"""
+from test_case import TestCase
+from l3fwd_base import L3fwdBase, LPM, EM, L3_IPV6, L3_IPV4
+
+
+class TestL3fwdLpmIpv4(TestCase, L3fwdBase):
+
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ L3fwd Prerequisites
+ """
+ # Based on h/w type, choose how many ports to use
+ self.dut_ports = self.dut.get_ports(self.nic)
+ valports = [
+ _ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+ self.logger.debug(valports)
+ self.verify_ports_number(valports)
+ # get socket and cores
+ socket = self.dut.get_numa_id(self.dut_ports[0])
+ cores = self.dut.get_core_list("1S/8C/1T", socket=socket)
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+ # init l3fwd common base class parameters
+ self.l3fwd_init(valports, socket)
+ # preset testing environment
+ self.l3fwd_preset_test_environment(self.get_suite_cfg())
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ self.l3fwd_reset_cur_case()
+
+ def test_perf_throughput_ipv4_lpm(self):
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv4_lpm')
+ self.ms_throughput(l3_proto=L3_IPV4, mode=LPM)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 1/13] tests/l3fwd_lpm_ipv6: upload automation script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (9 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 0/13] tests/l3fwd_lpm_ipv4: " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 2/13] tests/l3fwd_base: " yufengmx
` (2 subsequent siblings)
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
upload l3fwd_lpm_ipv6 suite automation script.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_l3fwd_lpm_ipv6.py | 85 +++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
create mode 100644 tests/TestSuite_l3fwd_lpm_ipv6.py
diff --git a/tests/TestSuite_l3fwd_lpm_ipv6.py b/tests/TestSuite_l3fwd_lpm_ipv6.py
new file mode 100644
index 0000000..c9dd0ab
--- /dev/null
+++ b/tests/TestSuite_l3fwd_lpm_ipv6.py
@@ -0,0 +1,85 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Layer-3 forwarding test script.
+"""
+from test_case import TestCase
+from l3fwd_base import L3fwdBase, LPM, EM, L3_IPV6, L3_IPV4
+
+
+class TestL3fwdLpmIpv6(TestCase, L3fwdBase):
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ L3fwd Prerequisites
+ """
+ # Based on h/w type, choose how many ports to use
+ self.dut_ports = self.dut.get_ports(self.nic)
+ valports = [
+ _ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+ self.logger.debug(valports)
+ self.verify_ports_number(valports)
+ # get socket and cores
+ socket = self.dut.get_numa_id(self.dut_ports[0])
+ cores = self.dut.get_core_list("1S/8C/1T", socket=socket)
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+ # init l3fwd common base class parameters
+ self.l3fwd_init(valports, socket)
+ # preset testing environment
+ self.l3fwd_preset_test_environment(self.get_suite_cfg())
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ self.l3fwd_reset_cur_case()
+
+ def test_perf_throughput_ipv6_lpm(self):
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv6_lpm')
+ self.ms_throughput(l3_proto=L3_IPV6, mode=LPM)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 2/13] tests/l3fwd_base: upload automation script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (10 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 1/13] tests/l3fwd_lpm_ipv6: " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 3/13] framework/test_case: add wirespeed columbiaville nic yufengmx
2020-01-16 7:15 ` [dts] [PATCH V3 0/13] l3fwd: refactor script Tu, Lijuan
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
upload l3fwd_base automation script for l3fwd relevant test suites.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/l3fwd_base.py | 744 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 744 insertions(+)
create mode 100644 tests/l3fwd_base.py
diff --git a/tests/l3fwd_base.py b/tests/l3fwd_base.py
new file mode 100644
index 0000000..3fbf71f
--- /dev/null
+++ b/tests/l3fwd_base.py
@@ -0,0 +1,744 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Layer-3 forwarding test script base class.
+"""
+import os
+import time
+import traceback
+import texttable
+import json
+from pprint import pformat
+from itertools import product
+from copy import deepcopy
+
+from config import SuiteConf
+from settings import HEADER_SIZE
+from packet import Packet
+from pktgen import TRANSMIT_CONT, PKTGEN_TREX, PKTGEN_IXIA
+from utils import convert_int2ip, convert_ip2int
+from exception import VerifyFailure
+import utils
+
+
+# LPM(longest prefix match) mode
+LPM = 'lpm'
+# EM(Exact-Match) mode
+EM = 'em'
+# stream types
+L3_IPV6 = 'ipv6'
+L3_IPV4 = 'ipv4'
+
+
+class L3fwdBase(object):
+
+ def l3fwd_init(self, valports, socket):
+ self.__valports = valports
+ self.__socket = socket
+ self.__nic_name = self.nic
+ self.__pkt_typ = 'udp'
+ # for result
+ self.__cur_case = None
+ self.__json_results = {}
+
+ @property
+ def output_path(self):
+ suiteName = self.suite_name
+ if self.logger.log_path.startswith(os.sep):
+ output_path = os.path.join(self.logger.log_path, suiteName)
+ else:
+ cur_path = os.sep.join(
+ os.path.realpath(__file__).split(os.sep)[:-3])
+ output_path = os.path.join(
+ cur_path, self.logger.log_path, suiteName)
+ if not os.path.exists(output_path):
+ os.makedirs(output_path)
+
+ return output_path
+
+ def d_con(self, cmd):
+ _cmd = [cmd, '# ', 10] if isinstance(cmd, (str, unicode)) else cmd
+ return self.dut.send_expect(*_cmd)
+
+ def __get_ipv4_lpm_vm_config(self, lpm_config):
+ netaddr, mask = lpm_config.split('/')
+ ip_range = int('1' * (32 - int(mask)), 2)
+ start_ip = convert_int2ip(convert_ip2int(netaddr) + 1)
+ end_ip = convert_int2ip(convert_ip2int(start_ip) + ip_range - 1)
+ layers = {'ipv4': {'src': start_ip, }, }
+ fields_config = {
+ 'ip': {'dst': {
+ 'src': start_ip,
+ 'dst': end_ip,
+ 'step': 1,
+ 'action': 'random', }, }, }
+ return layers, fields_config
+
+ def __get_ipv6_lpm_vm_config(self, lpm_config):
+ netaddr, mask = lpm_config.split('/')
+ ip_range = int('1' * (128 - int(mask)), 2)
+ start_ip = convert_int2ip(
+ convert_ip2int(netaddr, ip_type=6) + 1, ip_type=6)
+ end_ip = convert_int2ip(
+ convert_ip2int(start_ip, ip_type=6) + ip_range - 1, ip_type=6)
+ layers = {'ipv6': {'src': start_ip, }, }
+ fields_config = {
+ 'ipv6': {'dst': {
+ 'src': start_ip,
+ 'dst': end_ip,
+ 'step': 1,
+ 'action': 'random', }, }, }
+ return layers, fields_config
+
+ def __get_pkt_len(self, pkt_type, ip_type='ip', frame_size=64):
+ headers_size = sum(
+ map(lambda x: HEADER_SIZE[x], ['eth', ip_type, pkt_type]))
+ pktlen = frame_size - headers_size
+ return pktlen
+
+ def __get_frame_size(self, name, frame_size):
+ _frame_size = 66 if name == L3_IPV6 and frame_size == 64 else \
+ frame_size
+ return _frame_size
+
+ def __config_stream(self, stm_name, layers=None, frame_size=64):
+ _framesize = self.__get_frame_size(stm_name, frame_size)
+ payload_size = self.__get_pkt_len(
+ self.__pkt_typ,
+ 'ip' if stm_name == L3_IPV4 else 'ipv6', _framesize)
+ # set streams for traffic
+ pkt_configs = {
+ L3_IPV4: {
+ 'type': self.__pkt_typ.upper(),
+ 'pkt_layers': {
+ 'raw': {'payload': ['58'] * payload_size}}},
+ L3_IPV6: {
+ 'type': 'IPv6_' + self.__pkt_typ.upper(),
+ 'pkt_layers': {
+ 'raw': {'payload': ['58'] * payload_size}}}, }
+ if stm_name not in pkt_configs.keys():
+ msg = '{} not set in table'.format(stm_name)
+ raise VerifyFailure(msg)
+ values = deepcopy(pkt_configs.get(stm_name))
+ if layers:
+ values['pkt_layers'].update(layers)
+ self.logger.debug(pformat(values))
+ pkt = self.__get_pkt_inst(values)
+
+ return pkt
+
+ def __get_pkt_inst(self, pkt_config):
+ pkt_type = pkt_config.get('type')
+ pkt_layers = pkt_config.get('pkt_layers')
+ pkt = Packet(pkt_type=pkt_type)
+ for layer in pkt_layers.keys():
+ pkt.config_layer(layer, pkt_layers[layer])
+ self.logger.debug(pformat(pkt.pktgen.pkt.command()))
+
+ return pkt.pktgen.pkt
+
+ def __preset_flows_configs(self):
+ flows = self.__test_content.get('flows')
+ if not flows:
+ msg = "flows not set in json cfg file"
+ raise VerifyFailure(msg)
+ flows_configs = {}
+ for name, mode_configs in flows.iteritems():
+ for mode, configs in mode_configs.iteritems():
+ for index, config in enumerate(configs):
+ if mode == LPM:
+ # under LPM mode, one port only set one stream
+ if index >= len(self.__valports):
+ break
+ port_id = self.__valports[index]
+ dmac = self.dut.get_mac_address(port_id)
+ _layer = {'ether': {'dst': dmac, }, }
+ _layer2, fields_config = \
+ self.__get_ipv4_lpm_vm_config(config) \
+ if name == L3_IPV4 else \
+ self.__get_ipv6_lpm_vm_config(config)
+ _layer.update(_layer2)
+ else:
+ if index >= 2 * len(self.__valports):
+ break
+ port_id = \
+ self.__valports[(index / 2) % len(self.__valports)]
+ dmac = self.dut.get_mac_address(port_id)
+ _layer = {'ether': {'dst': dmac, }, }
+ _layer.update(config)
+ fields_config = None
+ flows_configs.setdefault((name, mode), []).append(
+ [_layer, fields_config])
+ return flows_configs
+
+ def __preset_streams(self):
+ frame_sizes = self.__test_content.get('frame_sizes')
+ if not frame_sizes:
+ msg = "frame sizes not set in json cfg file"
+ raise VerifyFailure(msg)
+ test_streams = {}
+ flows_configs = self.__preset_flows_configs()
+ for frame_size in frame_sizes:
+ for flow_key, flows_config in flows_configs.iteritems():
+ streams_key = flow_key + (frame_size, )
+ for flow_config in flows_config:
+ _layers, fields_config = flow_config
+ pkt = self.__config_stream(
+ flow_key[0], _layers, frame_size)
+ test_streams.setdefault(streams_key, []).append(
+ [pkt, fields_config])
+ self.logger.debug(pformat(test_streams))
+ return test_streams
+
+ def __add_stream_to_pktgen(self, streams, option):
+ def port(index):
+ p = self.tester.get_local_port(self.__valports[index])
+ return p
+ topos = [[port(index), port(index - 1)]
+ if index % 2 else
+ [port(index), port(index + 1)]
+ for index, _ in enumerate(self.__valports)] \
+ if len(self.__valports) > 1 else [[port(0), port(0)]]
+ stream_ids = []
+ step = len(streams) / len(self.__valports)
+ for cnt, stream in enumerate(streams):
+ pkt, field_config = stream
+ index = cnt // step
+ txport, rxport = topos[index]
+ _option = deepcopy(option)
+ _option['pcap'] = pkt
+ if field_config:
+ _option['field_config'] = field_config
+ stream_id = self.tester.pktgen.add_stream(txport, rxport, pkt)
+ self.tester.pktgen.config_stream(stream_id, _option)
+ stream_ids.append(stream_id)
+ return stream_ids
+
+ def __send_packets_by_pktgen(self, option):
+ streams = option.get('stream')
+ rate = option.get('rate')
+ # set traffic option
+ traffic_opt = option.get('traffic_opt')
+ self.logger.debug(option)
+ # clear streams before add new streams
+ self.tester.pktgen.clear_streams()
+ # set stream into pktgen
+ stream_option = {
+ 'stream_config': {
+ 'txmode': {},
+ 'transmit_mode': TRANSMIT_CONT,
+ 'rate': rate, }}
+ stream_ids = self.__add_stream_to_pktgen(streams, stream_option)
+ # run packet generator
+ result = self.tester.pktgen.measure(stream_ids, traffic_opt)
+ return result
+
+ def __throughput(self, l3_proto, mode, frame_size):
+ """
+ measure __throughput according to Layer-3 Protocol and Lookup Mode
+ """
+ flow_key = (l3_proto, mode, frame_size)
+ if flow_key not in self.__streams.keys():
+ msg = "{} {} {}: expected streams failed to create".format(
+ *flow_key)
+ raise VerifyFailure(msg)
+ streams = self.__streams.get(flow_key)
+ # set traffic option
+ duration = self.__test_content.get('test_duration')
+ option = {
+ 'stream': streams,
+ 'rate': 100,
+ 'traffic_opt': {
+ 'method': 'throughput',
+ 'duration': duration, }}
+ # run traffic
+ result = self.__send_packets_by_pktgen(option)
+ # statistics result
+ _, pps = result
+ self.verify(pps > 0, "No traffic detected")
+ return result
+
+ def __rfc2544(self, config, l3_proto, mode, frame_size):
+ """
+ measure RFC2544 according to Layer-3 Protocol and Lookup Mode
+ """
+ flow_key = (l3_proto, mode, frame_size)
+ if flow_key not in self.__streams.keys():
+ msg = "{} {} {}: expected streams failed to create".format(
+ *flow_key)
+ raise VerifyFailure(msg)
+ streams = self.__streams.get(flow_key)
+ # set traffic option
+ if not self.__cur_case:
+ msg = 'current test case name not set, use default traffic option'
+ self.logger.warning(msg)
+ conf_opt = self.__test_content.get('expected_rfc2544', {}).get(
+ self.__cur_case, {}).get(self.__nic_name, {}).get(config, {}).get(
+ str(frame_size), {}).get('traffic_opt', {})
+ max_rate = float(conf_opt.get('max_rate') or 100.0)
+ min_rate = float(conf_opt.get('min_rate') or 0.0)
+ accuracy = float(conf_opt.get('accuracy') or 0.001)
+ pdr = float(conf_opt.get('pdr') or 0.001)
+ duration = self.__test_content.get('test_duration')
+ option = {
+ 'stream': streams,
+ 'rate': max_rate,
+ 'traffic_opt': {
+ 'method': 'rfc2544_dichotomy',
+ 'max_rate': max_rate,
+ 'min_rate': min_rate,
+ 'accuracy': accuracy,
+ 'pdr': pdr,
+ 'duration': duration, }}
+ # run traffic
+ result = self.__send_packets_by_pktgen(option)
+ # statistics result
+ if result:
+ _, tx_pkts, rx_pkts = result
+ self.verify(tx_pkts > 0, "No traffic detected")
+ self.verify(rx_pkts > 0, "No packet transfer detected")
+ else:
+ msg = 'failed to get zero loss rate percent with traffic option.'
+ self.logger.error(msg)
+ self.logger.info(pformat(option))
+
+ return result
+
+ def __preset_compilation(self):
+ # Update config file and rebuild to get best perf on FVL
+ if self.nic in ["fortville_sprit", "fortville_eagle", "fortville_25g"]:
+ self.d_con(
+ ("sed -i -e 's/"
+ "CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/"
+ "CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/' "
+ "./config/common_base"))
+ self.dut.build_install_dpdk(self.target)
+ # init l3fwd binary file
+ self.logger.info(
+ "Configure RX/TX descriptor to 2048, re-build ./examples/l3fwd")
+ self.d_con((
+ "sed -i -e 's/"
+ "define RTE_TEST_RX_DESC_DEFAULT.*$/"
+ "define RTE_TEST_RX_DESC_DEFAULT 2048/' "
+ "./examples/l3fwd/main.c"))
+ self.d_con((
+ "sed -i -e 's/"
+ "define RTE_TEST_TX_DESC_DEFAULT.*$/"
+ "define RTE_TEST_TX_DESC_DEFAULT 2048/' "
+ "./examples/l3fwd/main.c"))
+ self.__l3fwd_em = self.__init_l3fwd(EM)
+ self.__l3fwd_lpm = self.__init_l3fwd(LPM)
+
+ def __init_l3fwd(self, mode):
+ """
+ Prepare long prefix match table, __replace P(x) port pattern
+ """
+ l3fwd_method = '_'.join(['l3fwd', mode])
+ self.d_con("make clean -C examples/l3fwd")
+ flg = 1 if LPM in l3fwd_method else 0
+ out = self.dut.build_dpdk_apps(
+ "./examples/l3fwd",
+ "USER_FLAGS=-DAPP_LOOKUP_METHOD={}".format(flg))
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+ # rename binary file
+ self.d_con(
+ ("mv -f examples/l3fwd/build/l3fwd "
+ "examples/l3fwd/build/{}").format(l3fwd_method))
+ l3fwd_bin = os.path.join("./examples/l3fwd/build/", l3fwd_method)
+ return l3fwd_bin
+
+ def __start_l3fwd(self, mode, core_mask, config, frame_size):
+ bin = self.__l3fwd_em if mode == EM else self.__l3fwd_lpm
+ # Start L3fwd application
+ command_line = (
+ "{bin} "
+ "-c {cores} "
+ "-n {channel} "
+ "-- "
+ "-p {port_mask} "
+ "--config '{config}'"
+ "").format(**{
+ 'bin': bin,
+ 'cores': core_mask,
+ 'channel': self.dut.get_memory_channels(),
+ 'port_mask': utils.create_mask(self.__valports),
+ 'config': config, })
+ if self.nic == "niantic":
+ command_line += " --parse-ptype"
+ if frame_size > 1518:
+ command_line += " --enable-jumbo --max-pkt-len %d" % frame_size
+ self.d_con([command_line, "L3FWD:", 120])
+ self.__is_l3fwd_on = True
+ # wait several second for l3fwd checking ports link status.
+ # It is aimed to make sure trex detect link up status.
+ time.sleep(2 * len(self.__valports))
+
+ def __close_l3fwd(self):
+ if not self.__is_l3fwd_on:
+ return
+ self.d_con("^C")
+ self.__is_l3fwd_on = False
+
+ def __json_rfc2544(self, value):
+ return {"unit": "Mpps", "name": "Rfc2544",
+ "value": value[0], "delta": value[1]}
+
+ def __json_throughput(self, value):
+ return {"unit": "Mpps", "name": "Throughput",
+ "value": value[0], "delta": value[1]}
+
+ def __json_line_rate(self, value):
+ return {"unit": "", "name": "% of Line Rate", "value": value}
+
+ def __json_port_config(self, value):
+ return {"unit": "", "name": "Number of Cores/Queues/Threads",
+ "value": value}
+
+ def __json_frame_size(self, value):
+ return {"unit": "bytes", "name": "Frame size",
+ "value": value}
+
+ def __save_throughput_result(self, case_name, result):
+ suite_results = {}
+ case_result = suite_results[case_name] = []
+ for sub_result in result:
+ status, throughput, line_rate, port_config, frame_size = sub_result
+ one_result = {
+ "status": status,
+ "performance": [
+ self.__json_throughput(throughput),
+ self.__json_line_rate(line_rate), ],
+ "parameters": [
+ self.__json_port_config(port_config),
+ self.__json_frame_size(frame_size), ]}
+ case_result.append(one_result)
+ self.logger.debug(pformat(suite_results))
+ self.__json_results[case_name] = suite_results
+
+ def __save_rfc2544_result(self, case_name, result):
+ suite_results = {}
+ case_result = suite_results[case_name] = []
+ for sub_result in result:
+ status, rfc2544, line_rate, port_config, frame_size = sub_result
+ one_result = {
+ "status": status,
+ "performance": [
+ self.__json_rfc2544(rfc2544),
+ self.__json_line_rate(line_rate), ],
+ "parameters": [
+ self.__json_port_config(port_config),
+ self.__json_frame_size(frame_size), ]}
+ case_result.append(one_result)
+ self.logger.debug(pformat(suite_results))
+ self.__json_results[case_name] = suite_results
+
+ def l3fwd_save_results(self, json_file=None):
+ if not self.__json_results:
+ msg = 'json results data is empty'
+ self.logger.error(msg)
+ return
+ _js_file = os.path.join(
+ self.output_path,
+ json_file if json_file else 'l3fwd_result.json')
+ with open(_js_file, 'w') as fp:
+ json.dump(self.__json_results, fp, indent=4,
+ separators=(',', ': '),
+ encoding="utf-8", sort_keys=True)
+
+ def __display_suite_result(self, data, mode):
+ values = data.get('values')
+ title = data.get('title')
+ max_length = sum([len(item) + 5 for item in title])
+ self.result_table_create(title)
+ self._result_table.table = texttable.Texttable(max_width=max_length)
+ for value in values:
+ self.result_table_add(value)
+ self.result_table_print()
+
+ def __check_throughput_result(self, stm_name, data, mode):
+ if not data:
+ msg = 'no result data'
+ raise VerifyFailure(msg)
+ values = []
+ js_results = []
+ bias = float(self.__test_content.get('accepted_tolerance') or 1.0)
+ for sub_data in data:
+ config, frame_size, result = sub_data
+ _, pps = result
+ pps /= 1000000.0
+ _frame_size = self.__get_frame_size(stm_name, frame_size)
+ linerate = self.wirespeed(
+ self.nic, _frame_size, len(self.__valports))
+ percentage = pps * 100 / linerate
+ # data for display
+ values.append(
+ [config, frame_size, mode.upper(), str(pps), str(percentage)])
+ # check data with expected values
+ expected_rate = None if not self.__cur_case else \
+ self.__test_content.get('expected_throughput', {}).get(
+ self.__cur_case, {}).get(self.__nic_name, {}).get(
+ config, {}).get(str(frame_size))
+ if expected_rate and float(expected_rate):
+ expected = float(expected_rate)
+ gap = 100 * (pps - expected) / expected
+ if abs(gap) < bias:
+ status = 'pass'
+ else:
+ status = 'failed'
+ msg = ('expected <{}>, '
+ 'current <{}> is '
+ '{}% over accepted tolerance').format(
+ expected, pps, round(gap, 2))
+ self.logger.error(msg)
+ else:
+ msg = ('{0} {1} expected throughput value is not set, '
+ 'ignore check').format(config, frame_size)
+ self.logger.warning(msg)
+ status = 'pass'
+ js_results.append([status, result, linerate, config, frame_size])
+ # save data with json format
+ self.__save_throughput_result(self.__cur_case, js_results)
+ # display result table
+ title = [
+ 'Total Cores/Threads/Queues per port',
+ 'Frame Size',
+ "Mode",
+ 'Throughput Rate {} Mode mpps'.format(mode.upper()),
+ 'Throughput Rate {} Mode Linerate%'.format(mode.upper()), ]
+
+ _data = {
+ 'title': title,
+ 'values': values}
+ self.__display_suite_result(_data, mode)
+
+ def __check_rfc2544_result(self, stm_name, data, mode):
+ if not data:
+ msg = 'no result data'
+ raise Exception(msg)
+ bias = self.__test_content.get('accepted_tolerance')
+ values = []
+ js_results = []
+ for sub_data in data:
+ config, frame_size, result = sub_data
+ expected_cfg = {} if not self.__cur_case else \
+ self.__test_content.get('expected_rfc2544', {}).get(
+ self.__cur_case, {}).get(self.__nic_name, {}).get(
+ config, {}).get(str(frame_size), {})
+ zero_loss_rate, tx_pkts, rx_pkts = result if result else [None] * 3
+ # expected line rate
+ _frame_size = self.__get_frame_size(stm_name, frame_size)
+ linerate = self.wirespeed(
+ self.nic, _frame_size, len(self.__valports))
+ throughput = linerate * zero_loss_rate / 100
+ # append data for display
+ pdr = expected_cfg.get('traffic_opt', {}).get('pdr')
+ values.append([
+ config, frame_size, mode.upper(),
+ str(throughput),
+ str(zero_loss_rate),
+ ])
+ # check data with expected values
+ expected_rate = float(expected_cfg.get('rate') or 100.0)
+ status = 'pass' \
+ if zero_loss_rate and zero_loss_rate > expected_rate \
+ else 'failed'
+ js_results.append(
+ [status, [zero_loss_rate, 0], linerate, config, frame_size])
+ # save data in json file
+ self.__save_rfc2544_result(self.__cur_case, js_results)
+ # display result table
+ title = [
+ 'Total Cores/Threads/Queues per port',
+ "Frame Size",
+ "Mode",
+ 'Theory line rate (Mpps) '.format(mode.upper()),
+ '{} Mode Zero Loss Rate % '.format(mode.upper()),
+ ]
+
+ _data = {
+ 'title': title,
+ 'values': values}
+ self.__display_suite_result(_data, mode)
+
+ def ms_throughput(self, l3_proto, mode):
+ except_content = None
+ try:
+ test_content = self.__test_content.get('port_configs')
+ results = []
+ for config, core_mask, port_conf, frame_size in test_content:
+ # Start L3fwd application
+ self.logger.info(
+ ("Executing l3fwd with {0} mode, {1} ports, "
+ "{2} and {3} frame size").format(
+ mode, len(self.__valports), config, frame_size))
+ self.__start_l3fwd(mode, core_mask, port_conf, frame_size)
+ result = self.__throughput(l3_proto, mode, frame_size)
+ # Stop L3fwd
+ self.__close_l3fwd()
+ if result:
+ results.append([config, frame_size, result])
+ self.__check_throughput_result(l3_proto, results, mode)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.__close_l3fwd()
+
+ # re-raise verify exception result
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def qt_rfc2544(self, l3_proto, mode):
+ except_content = None
+ try:
+ test_content = self.__test_content.get('port_configs')
+ results = []
+ for config, core_mask, port_conf, frame_size in test_content:
+ # Start L3fwd application
+ self.logger.info(
+ ("Executing l3fwd with {0} mode, {1} ports, "
+ "{2} and {3} frame size").format(
+ mode, len(self.__valports), config, frame_size))
+ self.__start_l3fwd(mode, core_mask, port_conf, frame_size)
+ result = self.__rfc2544(config, l3_proto, mode, frame_size)
+ # Stop L3fwd
+ self.__close_l3fwd()
+ if result:
+ results.append([config, frame_size, result])
+ self.__check_rfc2544_result(l3_proto, results, mode)
+ except Exception as e:
+ self.logger.error(traceback.format_exc())
+ except_content = e
+ finally:
+ self.__close_l3fwd()
+
+ # re-raise verify exception result
+ if except_content:
+ raise VerifyFailure(except_content)
+
+ def __parse_port_config(self, config):
+ cores, total_threads, queue = config.split('/')
+ _thread = str(int(total_threads[:-1]) / int(cores[:-1])) + 'T'
+ _cores = str(int(cores[:-1]) * len(self.__valports)) + 'C'
+ # only use one socket
+ cores_config = '/'.join(['1S', _cores, _thread])
+ queues_per_port = int(queue[:-1])
+ return cores_config, queues_per_port
+
+ def __get_test_configs(self, options, ports, socket):
+ if not options:
+ msg = "'test_parameters' not set in suite configuration file"
+ raise VerifyFailure(msg)
+ configs = []
+ frame_sizes_grp = []
+ for test_item, frame_sizes in sorted(options.iteritems()):
+ _frame_sizes = [int(frame_size) for frame_size in frame_sizes]
+ frame_sizes_grp.extend([int(item) for item in _frame_sizes])
+ cores, queues_per_port = self.__parse_port_config(test_item)
+ grp = [list(item)
+ for item in product(range(queues_per_port), range(ports))]
+ corelist = self.dut.get_core_list(
+ cores, socket if cores.startswith('1S') else -1)
+ corelist = [str(int(core) + 2) for core in corelist]
+ cores_mask = utils.create_mask(corelist)
+ total = len(grp)
+ _corelist = (corelist * (total // len(corelist) + 1))[:total]
+ # ignore first 2 cores
+ [grp[index].append(core)
+ for index, core in enumerate(_corelist)]
+ # (port,queue,lcore)
+ [configs.append([
+ test_item,
+ cores_mask,
+ ','.join(["({0},{1},{2})".format(port, queue, core)
+ for queue, port, core in grp]),
+ frame_size, ]) for frame_size in _frame_sizes]
+ return configs, sorted(set(frame_sizes_grp))
+
+ def __get_test_content_from_cfg(self, test_content):
+ self.logger.debug(pformat(test_content))
+ # get flows configuration
+ suite_conf = SuiteConf('l3fwd_base')
+ flows = suite_conf.suite_cfg.get('l3fwd_flows')
+ test_content['flows'] = flows
+ # parse port config of l3fwd
+ port_configs, frame_sizes = self.__get_test_configs(
+ test_content.get('test_parameters'),
+ len(self.__valports), self.__socket)
+ test_content['port_configs'] = port_configs
+ test_content['frame_sizes'] = frame_sizes
+ self.logger.debug(pformat(test_content))
+
+ return test_content
+
+ def l3fwd_preset_test_environment(self, test_content):
+ # get test content
+ self.__test_content = self.__get_test_content_from_cfg(test_content)
+ # binary process flag
+ self.__is_l3fwd_on = None
+ # prepare target source code application
+ self.__preset_compilation()
+ # config streams
+ self.__streams = self.__preset_streams()
+
+ def l3fwd_set_cur_case(self, name):
+ self.__cur_case = name
+
+ def l3fwd_reset_cur_case(self):
+ self.__cur_case = None
+
+ @property
+ def is_pktgen_on(self):
+ return hasattr(self.tester, 'is_pktgen') and self.tester.is_pktgen
+
+ @property
+ def pktgen_type(self):
+ if self.is_pktgen_on:
+ return self.tester.pktgen.pktgen_type
+ else:
+ return 'scapy'
+
+ def verify_ports_number(self, port_num):
+ supported_num = {
+ PKTGEN_TREX: [2, 4],
+ PKTGEN_IXIA: [1, 2, 4],
+ }
+ if not self.is_pktgen_on:
+ msg = 'not using pktgen'
+ self.logger.warning(msg)
+ return
+ # verify that enough ports are available
+ _supported_num = supported_num.get(self.pktgen_type)
+ msg = "Port number must be {} when using pktgen <{}>".format(
+ pformat(_supported_num), self.pktgen_type)
+ self.verify(len(port_num) in _supported_num, msg)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* [dts] [PATCH V3 3/13] framework/test_case: add wirespeed columbiaville nic
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (11 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 2/13] tests/l3fwd_base: " yufengmx
@ 2020-01-16 5:28 ` yufengmx
2020-01-16 7:15 ` [dts] [PATCH V3 0/13] l3fwd: refactor script Tu, Lijuan
13 siblings, 0 replies; 17+ messages in thread
From: yufengmx @ 2020-01-16 5:28 UTC (permalink / raw)
To: dts, lijuan.tu; +Cc: yufengmx
add wirespeed columbiaville nic.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
framework/test_case.py | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/framework/test_case.py b/framework/test_case.py
index b7952fa..e1665bd 100644
--- a/framework/test_case.py
+++ b/framework/test_case.py
@@ -483,5 +483,9 @@ class TestCase(object):
bitrate *= 10
elif nic == 'fortville_25g':
bitrate *=25
+ elif nic == 'columbiaville_25g':
+ bitrate *= 25
+ elif nic == 'columbiaville_100g':
+ bitrate *= 100
return bitrate * num_ports / 8 / (frame_size + 20)
--
2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [dts] [PATCH V3 0/13] l3fwd: refactor script
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
` (12 preceding siblings ...)
2020-01-16 5:28 ` [dts] [PATCH V3 3/13] framework/test_case: add wirespeed columbiaville nic yufengmx
@ 2020-01-16 7:15 ` Tu, Lijuan
13 siblings, 0 replies; 17+ messages in thread
From: Tu, Lijuan @ 2020-01-16 7:15 UTC (permalink / raw)
To: Mo, YufengX, dts
Hi Feng,
Applied the patch set failed because code base changed. Could you please rework it ?
thanks
> -----Original Message-----
> From: Mo, YufengX
> Sent: Thursday, January 16, 2020 1:28 PM
> To: dts@dpdk.org; Tu, Lijuan <lijuan.tu@intel.com>
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V3 0/13] l3fwd: refactor script
>
> refactor script.
>
>
> v3:
> - support one port testing topo for ixia.
> - add test case name in cfg file.
> - rename module l3fwd.py to l3fwd_base.py.
> - rename common_l3fwd.cfg to l3fwd_base.cfg.
> - rename verify method names.
> - rename test scripts suite name.
> -
>
> v2:
> - update script based on version 2 l3fwd test plan.
> - separate script into five suites for different testing scenario.
> - separate flows configuration in common_l3fwd.cfg.
> - add test result data check process as new test plan requirement.
> - save test results in json format file.
> -
>
> v1:
> - optimize packet creation time consumption.
> - separate LPM/EM mode packet creation process.
> - use new pktgen coding style to take the place of migration coding style.
> - unify rfc2544/throughput result data display table methods.
> - move test content configuration into cfg file, including flows/EM table/LPM
> table/framesizes/port configs.
>
> yufengmx (13):
> conf/l3fwd: l3fwd suite testing configuration
> conf/l3fwd_base: l3fwd base class flows configuration
> conf/l3fwd_em: suite testing configuration
> conf/l3fwd_lpm_ipv4_rfc2544: suite testing configuration
> conf/l3fwd_lpm_ipv4: l3fwd_lpm_ipv4 testing configuration
> conf/l3fwd_lpm_ipv6: suite testing configuration
> tests/l3fwd: upload automation script
> tests/l3fwd_em: upload automation script
> tests/l3fwd_lpm_ipv4_rfc2544: upload automation script
> tests/l3fwd_lpm_ipv4: upload automation script
> tests/l3fwd_lpm_ipv6: upload automation script
> tests/l3fwd_base: upload automation script
> framework/test_case: add wirespeed columbiaville nic
>
> conf/l3fwd.cfg | 400 ++++++++++++
> conf/l3fwd_base.cfg | 103 +++
> conf/l3fwd_em.cfg | 147 +++++
> conf/l3fwd_lpm_ipv4.cfg | 105 +++
> conf/l3fwd_lpm_ipv4_rfc2544.cfg | 105 +++
> conf/l3fwd_lpm_ipv6.cfg | 105 +++
> framework/test_case.py | 4 +
> tests/TestSuite_l3fwd.py | 370 ++---------
> tests/TestSuite_l3fwd_em.py | 258 +-------
> tests/TestSuite_l3fwd_lpm_ipv4.py | 86 +++
> tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py | 86 +++
> tests/TestSuite_l3fwd_lpm_ipv6.py | 85 +++
> tests/l3fwd_base.py | 744 ++++++++++++++++++++++
> 13 files changed, 2044 insertions(+), 554 deletions(-) create mode 100644
> conf/l3fwd.cfg create mode 100644 conf/l3fwd_base.cfg create mode
> 100644 conf/l3fwd_em.cfg create mode 100644 conf/l3fwd_lpm_ipv4.cfg
> create mode 100644 conf/l3fwd_lpm_ipv4_rfc2544.cfg create mode 100644
> conf/l3fwd_lpm_ipv6.cfg create mode 100644
> tests/TestSuite_l3fwd_lpm_ipv4.py create mode 100644
> tests/TestSuite_l3fwd_lpm_ipv4_rfc2544.py
> create mode 100644 tests/TestSuite_l3fwd_lpm_ipv6.py create mode
> 100644 tests/l3fwd_base.py
>
> --
> 2.21.0
^ permalink raw reply [flat|nested] 17+ messages in thread