Re: [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed

["Tu, Lijuan" <lijuan.tu@intel.com>]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Jiaqi Min
> Sent: Thursday, February 13, 2020 5:52 PM
> To: dts@dpdk.org
> Cc: Min, JiaqiX <jiaqix.min@intel.com>
> Subject: [dts] [PATCH v1] test_plans/shutdown_api: modify change linkspeed
> 
> fix test change linkspeed
> add test change linkspeed vf
> add testcase vf to test plan
> 
> Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
> ---
>  test_plans/shutdown_api_test_plan.rst | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/test_plans/shutdown_api_test_plan.rst
> b/test_plans/shutdown_api_test_plan.rst
> index 2d549e8..0968644 100644
> --- a/test_plans/shutdown_api_test_plan.rst
> +++ b/test_plans/shutdown_api_test_plan.rst
> @@ -144,6 +144,26 @@ Test Case: Change Link Speed
>     successfully.
>  7. Repeat this process for every compatible speed depending on the NIC
> driver.
> 
> +Test Case: Change Link Speed VF
> +----------------------------
> +
> +1. bind a PF to DPDK::
> +    ./usertools/dpdk-devbind.py -b igb_uio 1b:00.0 2. create a VF from
> +this PF::
> +    echo 1 > /sys/bus/pci/devices/0000\:1b\:00.0/max_vfs
> +   bind a VF to DPDK::
> +    ./usertools/dpdk-devbind.py -b igb_uio 1b:02.0 3. launch testpmd
> +with cmd::
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -l 0-3 -n 4
> +--file-prefix=minjq -- -i 4. Run ``port stop all`` to stop all ports.
> +5. Run ``port config all speed SPEED duplex HALF/FULL`` to select the new
> config for the link.
> +6. Run ``port start all`` to restart all ports.
> +   show port info all Check on the tester side that the VF configuration
> actually changed using ethtool.
> +7. Run ``start`` again to restart the forwarding, then start packet generator
> to transmit
> +   and receive packets, and check if testpmd is able to receive and forward
> packets
> +   successfully.
> +8. Repeat this process for every compatible speed depending on the NIC
> driver.
> +
>  Test Case: Enable/Disable Jumbo Frame
>  -------------------------------------
> 
> --
> 2.17.1