* [dts] [PATCH v1] test_plans: move cases to pvp_vhost_user_reconnect_test_plan.rst
@ 2020-02-21 3:21 Yinan
2020-02-22 12:18 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-02-21 3:21 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...ed_ring_vhost_user_reconnect_test_plan.rst | 387 ------------------
1 file changed, 387 deletions(-)
delete mode 100644 test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
diff --git a/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst b/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
deleted file mode 100644
index eca8abe..0000000
--- a/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
+++ /dev/null
@@ -1,387 +0,0 @@
-.. Copyright (c) <2019>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===================================
-Packed ring pvp reconnect test plan
-===================================
-
-Description
-===========
-
-Vhost-user uses Unix domain sockets for passing messages. This means the DPDK vhost-user implementation has two options:
-
-* DPDK vhost-user acts as the server:
- DPDK will create a Unix domain socket server file and listen for connections from the frontend.
- Note, this is the default mode, and the only mode before DPDK v16.07.
-
-* DPDK vhost-user acts as the client:
- Unlike the server mode, this mode doesn't create the socket file;it just tries to connect to the server (which responses to create the file instead).
- When the DPDK vhost-user application restarts, DPDK vhost-user will try to connect to the server again. This is how the "reconnect" feature works.
- When DPDK vhost-user restarts from an normal or abnormal exit (such as a crash), the client mode allows DPDK to establish the connection again. Note
- that QEMU version v4.2.0 or above is required for this reconnect feature.
- Also, when DPDK vhost-user acts as the client, it will keep trying to reconnect to the server (QEMU) until it succeeds. This is useful in two cases:
-
- * When QEMU is not started yet.
- * When QEMU restarts (for example due to a guest OS reboot).
-
-Test Case1: vhost-user/virtio-pmd pvp reconnect from vhost-user
-===============================================================
-Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-
-1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
-
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
- testpmd>set fwd mac
- testpmd>start
-
-2. Start VM with 1 virtio device, and set the qemu as server mode::
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :10
-
-3. On VM, bind virtio net to igb_uio and run testpmd::
-
- ./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-4. Send packets by packet generator, check if packets can be RX/TX with virtio-pmd::
-
- testpmd>show port stats all
-
-5. On host, quit vhost-user, then re-launch the vhost-user with below command::
-
- testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
- testpmd>set fwd mac
- testpmd>start
-
-6. Check if the reconnection can work, still send packets by packet generator, check if packets can be RX/TX with virtio-pmd::
-
- testpmd>show port stats all
-
-Test Case2: vhost-user/virtio-pmd pvp reconnect from VM
-=======================================================
-Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-
-1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
-
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
- testpmd>set fwd mac
- testpmd>start
-
-2. Start VM with 1 virtio device, and set the qemu as server mode::
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :10
-
-3. On VM, bind virtio net to igb_uio and run testpmd::
-
- ./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-4. Send packets by packet generator, check if packets can be RX/TX with virtio-pmd::
-
- testpmd>show port stats all
-
-5. Reboot the VM, rerun step2-step4, check the reconnection can be established.
-
-Test Case3: vhost-user/virtio-pmd pvp reconnect stability test
-==============================================================
-Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-
-Similar as Test Case1, all steps are similar except step 5, 6.
-
-5. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
-
-6. Reboot VM, then re-launch VM, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
-
-Test Case 4: vhost-user/virtio-pmd pvp with multi VMs reconnect from vhost-user
-===============================================================================
-
-1. Bind one port to igb_uio, launch the vhost by below command::
-
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-2. Launch VM1 and VM2::
-
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 12 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 12 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :11
-
-3. On VM1, bind virtio1 to igb_uio and run testpmd::
-
- ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-4. On VM2, bind virtio2 to igb_uio and run testpmd::
-
- ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-5. Send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
- testpmd>show port stats all
-
-6. On host, quit vhost-user, then re-launch the vhost-user with below command::
-
- testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-7. Check if the reconnection can work, still send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
- testpmd>show port stats all
-
-Test Case 5: vhost-user/virtio-pmd pvp with multi VMs reconnect from VMs
-========================================================================
-
-1. Bind one port to igb_uio, launch the vhost by below command::
-
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-2. Launch VM1 and VM2::
-
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :11
-
-3. On VM1, bind virtio1 to igb_uio and run testpmd::
-
- ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-4. On VM2, bind virtio2 to igb_uio and run testpmd::
-
- ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --port-topology=chain --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
- testpmd>start
-
-5. Send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
- testpmd>show port stats all
-
-6. Reboot the two VMs, rerun step2-step5.
-
-7. Check if the reconnection can work, still send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
- testpmd>show port stats all
-
-Test Case 6: vhost-user/virtio-pmd pvp with multi VMs reconnect stability test
-==============================================================================
-
-Similar as Test Case 4, all steps are similar except step 6, 7.
-
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
-
-7. Reboot VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
-
-Test Case 7: vhost-user/virtio-net VM2VM reconnect from vhost-user
-==================================================================
-Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-
-1. Launch the vhost by below commands, enable the client mode and tso::
-
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>start
-
-3. Launch VM1 and VM2::
-
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :11
-
-4. Set virtio device IP and run arp protocal on two VMs::
-
- VM1: ifconfig ens4 1.1.1.2
- VM2: ifconfig ens4 1.1.1.3
- VM1: arp -s 1.1.1.3 52:54:00:00:00:02
- VM2: arp -s 1.1.1.2 52:54:00:00:00:01
-
-5. Run iperf on VM1 and VM2, check the tso enabled performance for 1 min::
-
- VM1: iperf -s -i 1 -t 60
- VM2: iperf -c 1.1.1.2 -t 60 -i 1
-
-6. Kill the vhost-user, then re-launch the vhost-user::
-
- testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>start
-
-7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
-
-Test Case 8: vhost-user/virtio-net VM2VM reconnect from VMs
-===========================================================
-Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-
-1. Launch the vhost by below commands, enable the client mode and tso::
-
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>start
-
-3. Launch VM1 and VM2::
-
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
- -vnc :11
-
-4. Set virtio device IP and run arp protocal on two VMs::
-
- VM1: ifconfig ens4 1.1.1.2
- VM2: ifconfig ens4 1.1.1.3
- VM1: arp -s 1.1.1.3 52:54:00:00:00:02
- VM2: arp -s 1.1.1.2 52:54:00:00:00:01
-
-5. Run iperf on VM1 and VM2, check the tso enabled performance for 1 min::
-
- VM1: iperf -s -i 1 -t 60
- VM2: iperf -c 1.1.1.2 -t 60 -i 1
-
-6. Reboot VM1 and VM2, rerun step3-step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
-
-Test Case 9: vhost-user/virtio-net VM2VM reconnect stability test
-=================================================================
-Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-
-Similar as Test Case 7, all steps are similar except step 6.
-
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
-
-7. Reboot two VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
\ No newline at end of file
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans: move cases to pvp_vhost_user_reconnect_test_plan.rst
2020-02-21 3:21 [dts] [PATCH v1] test_plans: move cases to pvp_vhost_user_reconnect_test_plan.rst Yinan
@ 2020-02-22 12:18 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-02-22 12:18 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Friday, February 21, 2020 11:21 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: move cases to
> pvp_vhost_user_reconnect_test_plan.rst
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...ed_ring_vhost_user_reconnect_test_plan.rst | 387 ------------------
> 1 file changed, 387 deletions(-)
> delete mode 100644
> test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
>
> diff --git a/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
> b/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
> deleted file mode 100644
> index eca8abe..0000000
> --- a/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
> +++ /dev/null
> @@ -1,387 +0,0 @@
> -.. Copyright (c) <2019>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -===================================
> -Packed ring pvp reconnect test plan
> -===================================
> -
> -Description
> -===========
> -
> -Vhost-user uses Unix domain sockets for passing messages. This means the
> DPDK vhost-user implementation has two options:
> -
> -* DPDK vhost-user acts as the server:
> - DPDK will create a Unix domain socket server file and listen for connections
> from the frontend.
> - Note, this is the default mode, and the only mode before DPDK v16.07.
> -
> -* DPDK vhost-user acts as the client:
> - Unlike the server mode, this mode doesn't create the socket file;it just tries
> to connect to the server (which responses to create the file instead).
> - When the DPDK vhost-user application restarts, DPDK vhost-user will try to
> connect to the server again. This is how the "reconnect" feature works.
> - When DPDK vhost-user restarts from an normal or abnormal exit (such as a
> crash), the client mode allows DPDK to establish the connection again. Note
> - that QEMU version v4.2.0 or above is required for this reconnect feature.
> - Also, when DPDK vhost-user acts as the client, it will keep trying to
> reconnect to the server (QEMU) until it succeeds. This is useful in two cases:
> -
> - * When QEMU is not started yet.
> - * When QEMU restarts (for example due to a guest OS reboot).
> -
> -Test Case1: vhost-user/virtio-pmd pvp reconnect from vhost-user -
> ===============================================================
> -Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
> -
> -1. Bind one port to igb_uio, then launch vhost with client mode by below
> commands::
> -
> - ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev
> 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Start VM with 1 virtio device, and set the qemu as server mode::
> -
> - qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> - -chardev socket,id=char0,path=./vhost-net,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :10
> -
> -3. On VM, bind virtio net to igb_uio and run testpmd::
> -
> - ./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -4. Send packets by packet generator, check if packets can be RX/TX with
> virtio-pmd::
> -
> - testpmd>show port stats all
> -
> -5. On host, quit vhost-user, then re-launch the vhost-user with below
> command::
> -
> - testpmd>quit
> - ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev
> 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
> - testpmd>set fwd mac
> - testpmd>start
> -
> -6. Check if the reconnection can work, still send packets by packet generator,
> check if packets can be RX/TX with virtio-pmd::
> -
> - testpmd>show port stats all
> -
> -Test Case2: vhost-user/virtio-pmd pvp reconnect from VM -
> =======================================================
> -Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
> -
> -1. Bind one port to igb_uio, then launch vhost with client mode by below
> commands::
> -
> - ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev
> 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Start VM with 1 virtio device, and set the qemu as server mode::
> -
> - qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> - -chardev socket,id=char0,path=./vhost-net,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :10
> -
> -3. On VM, bind virtio net to igb_uio and run testpmd::
> -
> - ./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -4. Send packets by packet generator, check if packets can be RX/TX with
> virtio-pmd::
> -
> - testpmd>show port stats all
> -
> -5. Reboot the VM, rerun step2-step4, check the reconnection can be
> established.
> -
> -Test Case3: vhost-user/virtio-pmd pvp reconnect stability test -
> ==============================================================
> -Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
> -
> -Similar as Test Case1, all steps are similar except step 5, 6.
> -
> -5. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect
> can work and ensure the traffic can continue.
> -
> -6. Reboot VM, then re-launch VM, repeat it 3-5 times, check if the reconnect
> can work and ensure the traffic can continue.
> -
> -Test Case 4: vhost-user/virtio-pmd pvp with multi VMs reconnect from
> vhost-user -
> ================================================================
> ===============
> -
> -1. Bind one port to igb_uio, launch the vhost by below command::
> -
> - ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-
> prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-
> topology=chained --nb-cores=1 --txd=1024 --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch VM1 and VM2::
> -
> - qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 12 -m 4096
> \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> - -chardev socket,id=char0,path=./vhost-net,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :10
> -
> - qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 12 -m 4096
> \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-1.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
> - -chardev socket,id=char0,path=./vhost-net1,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :11
> -
> -3. On VM1, bind virtio1 to igb_uio and run testpmd::
> -
> - ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024
> --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -4. On VM2, bind virtio2 to igb_uio and run testpmd::
> -
> - ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024
> --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -5. Send packets by packet generator, check if packets can be RX/TX with two
> virtio-pmds in two VMs::
> -
> - testpmd>show port stats all
> -
> -6. On host, quit vhost-user, then re-launch the vhost-user with below
> command::
> -
> - testpmd>quit
> - ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-
> prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-
> topology=chained --nb-cores=1 --txd=1024 --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -7. Check if the reconnection can work, still send packets by packet generator,
> check if packets can be RX/TX with two virtio-pmds in two VMs::
> -
> - testpmd>show port stats all
> -
> -Test Case 5: vhost-user/virtio-pmd pvp with multi VMs reconnect from VMs
> -
> ================================================================
> ========
> -
> -1. Bind one port to igb_uio, launch the vhost by below command::
> -
> - ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-
> prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-
> topology=chained --nb-cores=1 --txd=1024 --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -2. Launch VM1 and VM2::
> -
> - qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> - -chardev socket,id=char0,path=./vhost-net,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :10
> -
> - qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-1.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
> - -chardev socket,id=char0,path=./vhost-net1,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :11
> -
> -3. On VM1, bind virtio1 to igb_uio and run testpmd::
> -
> - ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024
> --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -4. On VM2, bind virtio2 to igb_uio and run testpmd::
> -
> - ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --port-topology=chain --
> nb-cores=1 --txd=1024 --rxd=1024
> - testpmd>set fwd mac
> - testpmd>start
> -
> -5. Send packets by packet generator, check if packets can be RX/TX with two
> virtio-pmds in two VMs::
> -
> - testpmd>show port stats all
> -
> -6. Reboot the two VMs, rerun step2-step5.
> -
> -7. Check if the reconnection can work, still send packets by packet generator,
> check if packets can be RX/TX with two virtio-pmds in two VMs::
> -
> - testpmd>show port stats all
> -
> -Test Case 6: vhost-user/virtio-pmd pvp with multi VMs reconnect stability
> test -
> ================================================================
> ==============
> -
> -Similar as Test Case 4, all steps are similar except step 6, 7.
> -
> -6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect
> can work and ensure the traffic can continue.
> -
> -7. Reboot VMs, then re-launch VMs, repeat it 3-5 times, check if the
> reconnect can work and ensure the traffic can continue.
> -
> -Test Case 7: vhost-user/virtio-net VM2VM reconnect from vhost-user -
> ================================================================
> ==
> -Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
> -
> -1. Launch the vhost by below commands, enable the client mode and tso::
> -
> - ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --
> file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> - testpmd>start
> -
> -3. Launch VM1 and VM2::
> -
> - qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> - -chardev socket,id=char0,path=./vhost-net,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :10
> -
> - qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-1.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
> - -chardev socket,id=char0,path=./vhost-net1,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :11
> -
> -4. Set virtio device IP and run arp protocal on two VMs::
> -
> - VM1: ifconfig ens4 1.1.1.2
> - VM2: ifconfig ens4 1.1.1.3
> - VM1: arp -s 1.1.1.3 52:54:00:00:00:02
> - VM2: arp -s 1.1.1.2 52:54:00:00:00:01
> -
> -5. Run iperf on VM1 and VM2, check the tso enabled performance for 1 min::
> -
> - VM1: iperf -s -i 1 -t 60
> - VM2: iperf -c 1.1.1.2 -t 60 -i 1
> -
> -6. Kill the vhost-user, then re-launch the vhost-user::
> -
> - testpmd>quit
> - ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --
> file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> - testpmd>start
> -
> -7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the
> iperf traffic can be continue.
> -
> -Test Case 8: vhost-user/virtio-net VM2VM reconnect from VMs -
> ===========================================================
> -Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
> -
> -1. Launch the vhost by below commands, enable the client mode and tso::
> -
> - ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --
> file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev
> 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> - testpmd>start
> -
> -3. Launch VM1 and VM2::
> -
> - qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
> - -chardev socket,id=char0,path=./vhost-net,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :10
> -
> - qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
> - -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> - -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-1.img \
> - -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> - -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -
> daemonize \
> - -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net
> nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
> - -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
> - -chardev socket,id=char0,path=./vhost-net1,server \
> - -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> - -device virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=10
> 24,tx_queue_size=1024,packed=on \
> - -vnc :11
> -
> -4. Set virtio device IP and run arp protocal on two VMs::
> -
> - VM1: ifconfig ens4 1.1.1.2
> - VM2: ifconfig ens4 1.1.1.3
> - VM1: arp -s 1.1.1.3 52:54:00:00:00:02
> - VM2: arp -s 1.1.1.2 52:54:00:00:00:01
> -
> -5. Run iperf on VM1 and VM2, check the tso enabled performance for 1 min::
> -
> - VM1: iperf -s -i 1 -t 60
> - VM2: iperf -c 1.1.1.2 -t 60 -i 1
> -
> -6. Reboot VM1 and VM2, rerun step3-step5, ensure the vhost-user can
> reconnect to VM again, and the iperf traffic can be continue.
> -
> -Test Case 9: vhost-user/virtio-net VM2VM reconnect stability test -
> ================================================================
> =
> -Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
> -
> -Similar as Test Case 7, all steps are similar except step 6.
> -
> -6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect
> can work and ensure the traffic can continue.
> -
> -7. Reboot two VMs, then re-launch VMs, repeat it 3-5 times, check if the
> reconnect can work and ensure the traffic can continue.
> \ No newline at end of file
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-22 12:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-21 3:21 [dts] [PATCH v1] test_plans: move cases to pvp_vhost_user_reconnect_test_plan.rst Yinan
2020-02-22 12:18 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).