From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net
Date: Fri, 13 Mar 2020 06:37:04 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BBEC810@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200309174553.63796-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Tuesday, March 10, 2020 1:46 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v2] test_plans: add per-patch performance test for
> vm2vm_virtio_net
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../perf_vm2vm_virtio_net_perf_test_plan.rst | 251 ++++++++++++++++++
> 1 file changed, 251 insertions(+)
> create mode 100644 test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
>
> diff --git a/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
> b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
> new file mode 100644
> index 0000000..60e7abd
> --- /dev/null
> +++ b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
> @@ -0,0 +1,251 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary forim must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==========================================
> +perf vm2vm vhost-user/virtio-net test plan
> +==========================================
> +
> +Description
> +===========
> +
> +This test plan test vhost tx offload (TSO) function by verifing the
> +TSO/cksum in the TCP/IP stack enabled environment with vm2vm split ring
> +and packed ring vhost-user/virtio-net mergeable path. For packed virtqueue
> virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
> +
> +Test flow
> +=========
> +
> +Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net
> +
> +Test Case 1: Perf VM2VM split ring vhost-user/virtio-net test with tcp
> +traffic
> +===============================================================
> ========
> +=======
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --
> txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> +
> +Test Case 2: Perf VM2VM split ring vhost-user/virtio-net dequeue
> +zero-copy test with tcp traffic
> +===============================================================
> ========
> +=========================
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i
> --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> +
> +Test Case 3: Perf VM2VM packed ring vhost-user/virtio-net test with tcp
> +traffic
> +===============================================================
> ========
> +========
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --
> txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> +
> +Test Case 4: Perf VM2VM packed ring vhost-user/virtio-net dequeue
> +zero-copy test with tcp traffic
> +===============================================================
> ========
> +==========================
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i
> --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> \ No newline at end of file
> --
> 2.17.1
prev parent reply other threads:[~2020-03-13 6:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-09 17:45 Yinan
2020-03-13 6:37 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BBEC810@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).