* [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net
@ 2020-03-09 17:45 Yinan
2020-03-13 6:37 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-03-09 17:45 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
.../perf_vm2vm_virtio_net_perf_test_plan.rst | 251 ++++++++++++++++++
1 file changed, 251 insertions(+)
create mode 100644 test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
diff --git a/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
new file mode 100644
index 0000000..60e7abd
--- /dev/null
+++ b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
@@ -0,0 +1,251 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary forim must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+perf vm2vm vhost-user/virtio-net test plan
+==========================================
+
+Description
+===========
+
+This test plan test vhost tx offload (TSO) function by verifing the TSO/cksum in the TCP/IP
+stack enabled environment with vm2vm split ring and packed ring vhost-user/virtio-net mergeable
+path. For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
+
+Test flow
+=========
+
+Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net
+
+Test Case 1: Perf VM2VM split ring vhost-user/virtio-net test with tcp traffic
+==============================================================================
+
+1. Launch the Vhost sample by below commands::
+
+ rm -rf vhost-net*
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2::
+
+ taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+ taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
+
+Test Case 2: Perf VM2VM split ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic
+================================================================================================
+
+1. Launch the Vhost sample by below commands::
+
+ rm -rf vhost-net*
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2::
+
+ taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+ taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
+
+Test Case 3: Perf VM2VM packed ring vhost-user/virtio-net test with tcp traffic
+===============================================================================
+
+1. Launch the Vhost sample by below commands::
+
+ rm -rf vhost-net*
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2::
+
+ taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens3 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens3 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
+
+Test Case 4: Perf VM2VM packed ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic
+=================================================================================================
+
+1. Launch the Vhost sample by below commands::
+
+ rm -rf vhost-net*
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2::
+
+ taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens3 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens3 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
\ No newline at end of file
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net
2020-03-09 17:45 [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net Yinan
@ 2020-03-13 6:37 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-03-13 6:37 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Tuesday, March 10, 2020 1:46 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v2] test_plans: add per-patch performance test for
> vm2vm_virtio_net
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../perf_vm2vm_virtio_net_perf_test_plan.rst | 251 ++++++++++++++++++
> 1 file changed, 251 insertions(+)
> create mode 100644 test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
>
> diff --git a/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
> b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
> new file mode 100644
> index 0000000..60e7abd
> --- /dev/null
> +++ b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
> @@ -0,0 +1,251 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary forim must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==========================================
> +perf vm2vm vhost-user/virtio-net test plan
> +==========================================
> +
> +Description
> +===========
> +
> +This test plan test vhost tx offload (TSO) function by verifing the
> +TSO/cksum in the TCP/IP stack enabled environment with vm2vm split ring
> +and packed ring vhost-user/virtio-net mergeable path. For packed virtqueue
> virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
> +
> +Test flow
> +=========
> +
> +Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net
> +
> +Test Case 1: Perf VM2VM split ring vhost-user/virtio-net test with tcp
> +traffic
> +===============================================================
> ========
> +=======
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --
> txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> +
> +Test Case 2: Perf VM2VM split ring vhost-user/virtio-net dequeue
> +zero-copy test with tcp traffic
> +===============================================================
> ========
> +=========================
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i
> --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens5 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> +
> +Test Case 3: Perf VM2VM packed ring vhost-user/virtio-net test with tcp
> +traffic
> +===============================================================
> ========
> +========
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --
> txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> +
> +Test Case 4: Perf VM2VM packed ring vhost-user/virtio-net dequeue
> +zero-copy test with tcp traffic
> +===============================================================
> ========
> +==========================
> +
> +1. Launch the Vhost sample by below commands::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev
> 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
> + --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i
> --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>start
> +
> +2. Launch VM1 and VM2::
> +
> + taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
> + -chardev socket,id=char0,path=./vhost-net0 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :10
> +
> + taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -
> smp 1 -m 4096 \
> + -object memory-backend-file,id=mem,size=4096M,mem-
> path=/mnt/huge,share=on \
> + -numa node,memdev=mem -mem-prealloc -drive
> file=/home/osimg/ubuntu16-2.img \
> + -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -
> device virtio-serial \
> + -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2
> -daemonize \
> + -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device
> e1000,netdev=nttsip1 \
> + -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
> + -chardev socket,id=char0,path=./vhost-net1 \
> + -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
> + -device
> + virtio-net-
> pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=
> + on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on
> + -vnc :12
> +
> +3. On VM1, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.2
> + arp -s 1.1.1.8 52:54:00:00:00:02
> +
> +4. On VM2, set virtio device IP and run arp protocal::
> +
> + ifconfig ens3 1.1.1.8
> + arp -s 1.1.1.2 52:54:00:00:00:01
> +
> +5. Check the iperf performance between two VMs by below commands::
> +
> + Under VM1, run: `iperf -s -i 1`
> + Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
> +
> +6. Check iperf throughput can get expected data.
> \ No newline at end of file
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-13 6:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-09 17:45 [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net Yinan
2020-03-13 6:37 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).