test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans: add pvp_virtio_user_multi_queues_port_restart_test_plan
@ 2020-03-10 17:58 Yinan
  2020-03-13  6:51 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-03-10 17:58 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 ...er_multi_queues_port_restart_test_plan.rst | 351 ++++++++++++++++++
 1 file changed, 351 insertions(+)
 create mode 100644 test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst

diff --git a/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst b/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst
new file mode 100644
index 0000000..73c08a7
--- /dev/null
+++ b/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst
@@ -0,0 +1,351 @@
+.. Copyright (c) <2020>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==================================================================
+vhost/virtio-user pvp with multi-queues and port restart test plan
+==================================================================
+
+Description
+===========
+
+This test plan test vhost/virtio-user pvp multi-queues with split virtqueue
+and packed virtqueue different rx/tx paths, includes split virtqueue in-order
+mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test,
+and packed virtqueue in-order mergeable, in-order non-mergeable, mergeable,
+non-mergeable path, also cover port restart test with each path.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: pvp 2 queues test with packed ring mergeable path
+===============================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's rx/tx packet numbers::
+
+    testpmd>stop
+
+5. Port restart 100 times by below command and re-calculate the average througnput,verify the throughput is not zero after port restart::
+
+    testpmd>stop
+    testpmd>start
+    ...
+    testpmd>stop
+    testpmd>show port stats all
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 2: pvp 2 queues test with packed ring non-mergeable path
+==================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 3: pvp 2 queues test with split ring inorder mergeable path
+=====================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 4: pvp 2 queues test with split ring inorder non-mergeable path
+==========================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 5: pvp 2 queues test with split ring mergeable path
+=============================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 6: pvp 2 queues test with split ring non-mergeable path
+=================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 7: pvp 2 queues test with split ring vector_rx path
+=============================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 8: pvp 2 queues test with packed ring inorder mergeable path
+======================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
+
+Test Case 9: pvp 2 queues test with packed ring inorder non-mergeable path
+===========================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+    --legacy-mem --no-pci --file-prefix=virtio \
+    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+    >set fwd mac
+    >start
+
+3. Send different ip packets with packet generator, check the throughput with below command::
+
+    testpmd>show port stats all
+
+4. Check each queue's RX/TX packet numbers::
+
+    testpmd>stop
+
+5. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+    testpmd>start
+    testpmd>show port stats all
\ No newline at end of file
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-13  6:51 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-10 17:58 [dts] [PATCH v1] test_plans: add pvp_virtio_user_multi_queues_port_restart_test_plan Yinan
2020-03-13  6:51 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).