From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: remove vhost_pmd_xstats_test plan
Date: Fri, 13 Mar 2020 06:55:34 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BBEC91C@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200311050019.8246-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, March 11, 2020 1:00 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: remove vhost_pmd_xstats_test plan
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> test_plans/vhost_pmd_xstats_test_plan.rst | 124 ----------------------
> 1 file changed, 124 deletions(-)
> delete mode 100644 test_plans/vhost_pmd_xstats_test_plan.rst
>
> diff --git a/test_plans/vhost_pmd_xstats_test_plan.rst
> b/test_plans/vhost_pmd_xstats_test_plan.rst
> deleted file mode 100644
> index 5ae1dd1..0000000
> --- a/test_plans/vhost_pmd_xstats_test_plan.rst
> +++ /dev/null
> @@ -1,124 +0,0 @@
> -.. Copyright (c) <2016-2017>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -======================
> -Vhost PMD Xstats Tests
> -======================
> -
> -This test plan will cover the basic vhost pmd xstats case and will be worked -
> as a regression test plan. In the test plan, we will use vhost as a pmd port -in
> testpmd.
> -
> -Test Case1: xstats based on packet size -
> =======================================
> -
> -Flow::
> -
> - TG-->NIC-->>Vhost TX-->Virtio RX-->Virtio TX-->Vhost RX-->NIC-->TG
> -
> -1. Bind one physical port to igb_uio, then launch the testpmd
> -
> -2. Launch VM1 with using hugepage, 2048M memory, 2 cores,
> - 1 sockets, 1 virtio-net-pci::
> -
> - taskset -c 6-7 qemu-system-x86_64 -name us-vhost-vm1 -cpu host -
> enable-kvm
> - -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-
> path=/mnt/huge,
> - share=on -numa node,memdev=mem -mem-prealloc -smp
> cores=2,sockets=1 -drive
> - file=/home/osimg/ubuntu16.img -chardev socket,id=char0,path=./vhost-
> net
> - -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1
> - -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,mq=on
> - -netdev tap,id=ipvm1,ifname=tap3,script=/etc/qemu-ifup -device rtl8139,
> - netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -localtime -vnc :10 -
> daemonize
> -
> -3. On VM1, run testpmd
> -
> -4. On host, testpmd, set ports to the mac forward mode::
> -
> - testpmd>set fwd mac
> - testpmd>start tx_first
> -
> -5. On VM, testpmd, set port to the mac forward mode::
> -
> - testpmd>set fwd mac
> - testpmd>start
> -
> -6. On host run "show port xstats all" at least twice to check the packets
> number
> -
> -7. Let TG generate different size of packets, send 10000 packets for each
> packet
> - sizes(64,128,255, 512, 1024, 1523), check the statistic number is correct
> -
> -8. On host run "clear port xstats all" , then all the statistic date should be 0
> -
> -Test Case2: xstats based on packet types -
> ========================================
> -
> -Similar as Test Case1, all steps are similar except step 6, 7:
> -
> -6. On host run "show port xstats all" at least twice to check the packets type:
> -
> -7. Let TG generate different type of packets, broadcast, multicast, ucast,
> check
> - the statistic number is correct
> -
> -8. On host run "clear port xstats all" , then all the statistic date should be 0
> -
> -Test Case3: stability case with multiple queues -
> ===============================================
> -
> -1. No need bind any physical port to igb_uio,then launch the testpmd
> -
> -2. Launch VM1, set queues=2, vectors=2xqueues+2, mq=on, with using
> hugepage,
> - 2048M memory, 2 cores, 1 sockets, 1 virtio-net-pci::
> -
> - taskset -c 6-7 qemu-system-x86_64 -name us-vhost-vm1 -cpu host -
> enable-kvm
> - -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-
> path=/mnt/huge,\
> - share=on -numa node,memdev=mem -mem-prealloc \
> - -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16.img \
> - -chardev socket,id=char0,path=./vhost-net \
> - -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1
> \
> - -device virtio-net-
> pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,mq=on \
> - -netdev tap,id=ipvm1,ifname=tap3,script=/etc/qemu-ifup -device rtl8139,
> - netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -localtime -vnc :10 -
> daemonize
> -
> -3. On VM1, run testpmd
> -
> -4. On host, testpmd, set ports to the mac forward mode::
> -
> - testpmd>set fwd io retry
> - testpmd>start tx_first 8
> -
> -5. On VM, testpmd, set port to the mac forward mode::
> -
> - testpmd>start
> -
> -6. Send packets for 30 minutes, check the Xstats still can work correctly::
> -
> - testpmd>show port xstats all
> --
> 2.17.1
prev parent reply other threads:[~2020-03-13 6:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 5:00 Yinan
2020-03-13 6:55 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BBEC91C@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).