From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: add packed ring vectorized path cases for three topology of pvp_multi_paths performance test
Date: Mon, 20 Apr 2020 02:17:11 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC0CCB9@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200402153948.54759-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Thursday, April 2, 2020 11:40 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add packed ring vectorized path cases
> for three topology of pvp_multi_paths performance test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> .../pvp_multi_paths_performance_test_plan.rst | 43 +++++++++--
> ...host_single_core_performance_test_plan.rst | 77 ++++++++++++-------
> ...rtio_single_core_performance_test_plan.rst | 41 +++++++---
> 3 files changed, 117 insertions(+), 44 deletions(-)
>
> diff --git a/test_plans/pvp_multi_paths_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_performance_test_plan.rst
> index 9da51ba..bbb7d0e 100644
> --- a/test_plans/pvp_multi_paths_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_performance_test_plan.rst
> @@ -34,11 +34,15 @@
> vhost/virtio pvp multi-paths performance test plan
> ==================================================
>
> -Benchmark PVP multi-paths performance with 9 tx/rx paths.
> -Includes mergeable, non-mergeable, vector_rx, inorder mergeable, -inorder
> non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> -virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
> +Benchmark PVP multi-paths performance with 10 tx/rx paths. Includes
> +mergeable, non-mergeable, vectorized_rx, inorder mergeable, inorder
> +non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，virtio 1.1
> inorder mergeable, virtio 1.1 inorder non-mergeable, virtio1.1 vectorized
> path.
> Give 1 core for vhost and virtio respectively.
> +Note: Virtio 1.1 vectorized path need below three initial requirements:
> + 1. AVX512 is allowed in config file and supported by compiler
> + 2. Host cpu support AVX512F
> + 3. ring size is power of two
> +
>
> Test flow
> =========
> @@ -195,8 +199,8 @@ Test Case 6: pvp test with non-mergeable path
>
> testpmd>show port stats all
>
> -Test Case 7: pvp test with vector_rx path -
> =========================================
> +Test Case 7: pvp test with vectorized_rx path
> +=============================================
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> @@ -251,17 +255,40 @@ Test Case 9: pvp test with virtio 1.1 inorder non-
> mergeable path 1. Bind one port to igb_uio, then launch vhost by below
> command::
>
> rm -rf vhost-net*
> - ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + ./testpmd -n 4 -l 2-3 \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> -- -i --nb-cores=1 --txd=1024 --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> + -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 10: pvp test with virtio 1.1 vectorized path
> +======================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-
> net,queues=1,client=0' \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> 2. Launch virtio-user by below command::
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> >set fwd mac
> >start
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> index 92c0d60..e56bec6 100644
> ---
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rs
> t
> +++
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan
> +++ .rst
> @@ -34,12 +34,14 @@
> vhost/virtio pvp multi-paths vhost single core test plan
> ========================================================
>
> -Benchmark PVP vhost single core performance with 9 tx/rx paths.
> -Includes mergeable, non-mergeable, vector_rx, inorder mergeable, -inorder
> non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> -virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
> -Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side -to lower
> the virtio workload.
> +Benchmark PVP virtio single core performance with 10 tx/rx paths.
> +Includes mergeable, non-mergeable, vectorized_rx, inorder mergeable,
> +inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable, virtio1.1
> vectorized path.
> +Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower
> the virtio workload.
> +Note: Virtio 1.1 vectorizedized path need below three initial requirements:
> + 1. AVX512 is allowed in config file and supported by compiler
> + 2. Host cpu support AVX512F
> + 3. ring size is power of two
>
> Test flow
> =========
> @@ -52,14 +54,14 @@ Test Case 1: vhost single core performance test with
> virtio 1.1 mergeable path 1. Bind one port to igb_uio, then launch vhost by
> below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -73,14 +75,14 @@ Test Case 2: vhost single core performance test with
> virtio 1.1 non-mergeable pa 1. Bind one port to igb_uio, then launch vhost
> by below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -94,14 +96,14 @@ Test Case 3: vhost single core performance test with
> inorder mergeable path 1. Bind one port to igb_uio, then launch vhost by
> below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --legacy-mem --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -115,14 +117,14 @@ Test Case 4: vhost single core performance test
> with inorder non-mergeable path 1. Bind one port to igb_uio, then launch
> vhost by below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -136,14 +138,14 @@ Test Case 5: vhost single core performance test
> with mergeable path 1. Bind one port to igb_uio, then launch vhost by below
> command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -157,14 +159,14 @@ Test Case 6: vhost single core performance test
> with non-mergeable path 1. Bind one port to igb_uio, then launch vhost by
> below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -172,20 +174,20 @@ Test Case 6: vhost single core performance test
> with non-mergeable path
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 7: vhost single core performance test with vector_rx path -
> ================================================================
> ===
> +Test Case 7: vhost single core performance test with vectorized_rx path
> +===============================================================
> ========
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> -- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
> >set fwd io
> @@ -199,14 +201,14 @@ Test Case 8: vhost single core performance test
> with virtio 1.1 inorder mergeabl 1. Bind one port to igb_uio, then launch
> vhost by below command::
>
> rm -rf vhost-net*
> - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024
> --rxd=1024
> testpmd>set fwd mac
> testpmd>start
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> >set fwd io
> @@ -217,6 +219,27 @@ Test Case 8: vhost single core performance test with
> virtio 1.1 inorder mergeabl Test Case 9: vhost single core performance test
> with virtio 1.1 inorder non-mergeable path
> ================================================================
> ==========================
>
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> + -- -i --rx-offloads=0x10 --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 10: vhost single core performance test with virtio 1.1
> +vectorized path
> +===============================================================
> ========
> +======
> +
> 1. Bind one port to igb_uio, then launch vhost by below command::
>
> rm -rf vhost-net*
> @@ -227,9 +250,9 @@ Test Case 9: vhost single core performance test with
> virtio 1.1 inorder non-merg
>
> 2. Launch virtio-user by below command::
>
> - ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> - --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> + -- -i --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
> >set fwd io
> >start
>
> diff --git
> a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rs
> t
> index 990c18a..596d1e9 100644
> ---
> a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_pla
> +++ n.rst
> @@ -34,12 +34,14 @@
> vhost/virtio pvp multi-paths virtio single core test plan
> =========================================================
>
> -Benchmark pvp virtio single core performance with 9 tx/rx paths.
> -Includes mergeable, non-mergeable, vector_rx, inorder mergeable, -inorder
> non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> -virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
> -Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side -to lower
> the vhost workload.
> +Benchmark PVP virtio single core performance with 10 tx/rx paths.
> +Includes mergeable, non-mergeable, vectorized_rx, inorder mergeable,
> +inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
> virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable, virtio1.1
> vectorized path.
> +Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side to lower
> the vhost workload.
> +Note: Virtio 1.1 vectorizedized path need below three initial requirements:
> + 1. AVX512 is allowed in config file and supported by compiler
> + 2. Host cpu support AVX512F
> + 3. ring size is power of two
>
> Test flow
> =========
> @@ -178,7 +180,7 @@ Test Case 6: virtio single core performance test with
> non-mergeable path
>
> 3. Send packet with packet generator with different packet size, check the
> throughput.
>
> -Test Case 7: virtio single core performance test with vector_rx path
> +Test Case 7: virtio single core performance test with vectorized_rx
> +path
>
> ================================================================
> ====
>
> 1. Bind one port to igb_uio, then launch vhost by below command::
> @@ -237,8 +239,29 @@ Test Case 9: virtio single core performance test with
> virtio 1.1 inorder non-mer
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> + -- -i --rx-offloads=0x10 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 10: virtio single core performance test with virtio 1.1
> +vectorized path
> +===============================================================
> ========
> +======
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>set fwd io
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> + -- -i --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> --
> 2.17.1
prev parent reply other threads:[~2020-04-20 2:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 15:39 Yinan
2020-04-20 2:17 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC0CCB9@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).