From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: add packed ring vectorized case in vhost_pmd_xstats_test_plan
Date: Mon, 20 Apr 2020 02:17:16 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC0CCC7@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200402154701.55173-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Thursday, April 2, 2020 11:47 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add packed ring vectorized case in
> vhost_pmd_xstats_test_plan
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> test_plans/vhost_pmd_xstats_test_plan.rst | 41 ++++++++++++++++++++---
> 1 file changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/test_plans/vhost_pmd_xstats_test_plan.rst
> b/test_plans/vhost_pmd_xstats_test_plan.rst
> index 0baee7a..40a4817 100644
> --- a/test_plans/vhost_pmd_xstats_test_plan.rst
> +++ b/test_plans/vhost_pmd_xstats_test_plan.rst
> @@ -37,11 +37,14 @@ vhost PMD Xstats Tests restart test plan Description
> ===========
>
> -This test plan will cover the basic vhost pmd xstats test with each path of
> split ring -and packed ring, includes split virtqueue in-order mergeable, in-
> order non-mergeable, -mergeable, non-mergeable, vector_rx path test and
> packed virtqueue in-order mergeable, -in-order non-mergeable, mergeable,
> non-mergeable path, also cover a stability case.
> +This test plan will cover the basic vhost pmd xstats test with with 10
> +tx/rx paths. Includes mergeable, non-mergeable, vectorized_rx, inorder
> +mergeable, inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-
> mergeable,virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable,
> virtio1.1 vectorized path, also cover stability cases.
> Note IXIA or Scapy packes includes 4 CRC bytes and vhost side will remove
> the CRC when receive packests.
> +Note Virtio 1.1 vectorizedized path need below three initial requirements:
> + 1. AVX512 is allowed in config file and supported by compiler
> + 2. Host cpu support AVX512F
> + 3. ring size is power of two
>
> Test flow
> =========
> @@ -293,7 +296,35 @@ Test Case 9: xstats test with packed ring inorder
> non-mergeable path
>
> ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> + -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2
> --txq=2
> + >set fwd mac
> + >start
> +
> +3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512,
> 1024, 1523).
> +
> +4. On host run "show port xstats 1", and check the statistic type and
> number is correct.
> +
> +5. Let TG generate send 10000 packets for each different types (broadcast,
> multicast, ucast).
> +
> +6. On host run "show port xstats 1", and check the statistic type and
> number is correct.
> +
> +Test Case 10: xstats test with packed ring vectorized path
> +=========================================================
> +
> +1. Bind one port to vfio-pci, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -
> - -i --nb-cores=2 --rxq=2 --txq=2
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=
> + 2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 -
> -txq=2
> >set fwd mac
> >start
> --
> 2.17.1
prev parent reply other threads:[~2020-04-20 2:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 15:47 Yinan
2020-04-20 2:17 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC0CCC7@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).