From: "Tu, Lijuan" <lijuan.tu@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Wang, Yinan" <yinan.wang@intel.com>
Subject: Re: [dts] [PATCH v1] test_plans: update case due to virtio path selection logic change in loopback_multi_paths_port_restart_test_plan.rst
Date: Wed, 6 May 2020 03:14:59 +0000 [thread overview]
Message-ID: <8CE3E05A3F976642AAB0F4675D0AD20E0BC21DD9@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <20200428190240.73596-1-yinan.wang@intel.com>
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, April 29, 2020 3:03 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: update case due to virtio path selection
> logic change in loopback_multi_paths_port_restart_test_plan.rst
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> ...loopback_multi_paths_port_restart_test_plan.rst | 14 +++++---------
> 1 file changed, 5 insertions(+), 9 deletions(-)
>
> diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> index 4e5c886..3da94ad 100644
> --- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> +++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> @@ -38,10 +38,6 @@ This test plan includes split virtqueue mergeable, non-
> mergeable, vectorized_rx, inorder mergeable, inorder non-mergeable path,
> and packed virtqueue mergeable,
> non-mergeable，inorder mergeable, inorder non-mergeable, vectorized
> path test.
> Also test port restart and only send one packet each time using testpmd.
> -Note: Packed virtqueue vectorized path need below three initial
> requirements:
> - 1. AVX512 is allowed in config file and supported by compiler
> - 2. Host cpu support AVX512F
> - 3. ring size is power of two
>
> Test Case 1: loopback test with packed ring mergeable path
> ==========================================================
> @@ -180,7 +176,7 @@ Test Case 4: loopback test with packed ring inorder
> non-mergeable path
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
> -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> >set fwd mac
> >start
> @@ -344,8 +340,8 @@ Test Case 8: loopback test with split ring non-
> mergeable path
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0,vectorized=1 \
> + -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip
> + --nb-cores=1 --txd=1024 --rxd=1024
> >set fwd mac
> >start
>
> @@ -385,7 +381,7 @@ Test Case 9: loopback test with split ring vector_rx
> path
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_orde
> + r=0,mrg_rxbuf=0,vectorized=1 \
> -- -i --nb-cores=1 --txd=1024 --rxd=1024
> >set fwd mac
> >start
> @@ -425,7 +421,7 @@ Test Case 10: loopback test with packed ring
> vectorized path 2. Launch virtio-user by below command::
>
> ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,in_order=0,mrg_rxbuf=0,packed_vec=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,in_order=0,mrg_rxbuf=0,vectorized=1 \
> -- -i --nb-cores=1 --txd=1024 --rxd=1024
> >set fwd mac
> >start
> --
> 2.17.1
prev parent reply other threads:[~2020-05-06 3:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-28 19:02 Yinan
2020-05-06 3:14 ` Tu, Lijuan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CE3E05A3F976642AAB0F4675D0AD20E0BC21DD9@SHSMSX101.ccr.corp.intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).